Renewable Energy
Commercial and Industrial Solar Systems
RENEWABLE ENERGY
NHP Electrical Engineering Products Pty Ltd
Sales 1300 NHP NHP
nhp.com.au
WE’RE EASY TO DO BUSINESS WITH
At NHP we’re solely committed to serving the needs of our customers in the industrial electrical industry.
From concept design through to installation and after sales service, we are confident we have the
experience and expertise to exceed your expectations and ensure you get the best result for your project.
How? By combining Partnerships, Agility, Knowledge and Scalability, NHP can offer 100% Australian owned
service that forms the ultimate choice in our industry.
PARTNERSHIPS:
KNOWLEDGE:
When you choose NHP you gain a valuable industry
partner. You gain access to an exclusive network of quality
global suppliers who, together with NHP, can achieve an
engineered solution for your industrial electrical application.
A partnership with NHP promises to last, working together
with you to offer complete trust, assurance and peace of
mind.
If your industrial electrical application demands a
specialist team of trained project management, design
and engineering professionals, then NHP is the ultimate
choice, bringing together over 40 years of electrical industry
experience and knowledge.
SCALABILITY:
AGILITY:
With all the scale of a large multi-national company, NHP
maintain a premium level of customer service and attention
to detail no matter how big or small your project. With over
900+ expert staff in over 50+ branch and regional locations,
when you deal with NHP you receive all of this combined
knowledge and expertise delivered by local people with a
local focus, backed by global suppliers.
At NHP we understand your project needs and know that
these needs can often change throughout the life cycle of a
project. With a seamless combination of local and technical
support backed by around the clock service and local stock,
NHP has the agility to provide real time solutions where and
when you need them.
NHP ELECTRICAL ENGINEERING PRODUCTS PTY LTD
Sales 1300 NHP NHP | nhp.com.au |
Index
page
DC Modules
4
Three phase inverters
6
Roof and ground mounting systems
8
Solar kits
14
Cables and connectors
16
Combiner boxes
18
PV Distribution boards
19
Surge protection
21
Solar DC Isolators
25
Grid protection
28
For further information please contact Sales: 1300 NHP NHP or visit nhp.com.au
3]
minal Operating Cell Temperature (NOCT)
245 W
250 W
255 W
260 W
265 W
270 W
180 W
184 W
187 W
191 W
196 W
199 W
35.0 V
35.1 V
35.4 V
35.7 V
35.9 V
36.1 V
6.97 A
7.05 A
7.16 A
7.26 A
7.37 A
7.45 A
27.8 V
28.0 V
28.2 V
28.4 V
28.6 V
28.7 V
6.48 A
6.54 A
6.64 A
6.73 A
6.84 A
6.92 A
13.5 %
13.7 %
14.0 %
14.3 %
14.7 %
14.9 %
Various Irradiance Levels
DC Modules
erating Cell Temperature (NOCT) defined as irradiance of 800W/m²; 20°C; Wind speed
NHP SolarOne Solar Modules
in-house solar module for industrial and commercial applications has been initiated by demand for an NHP branded
Maximum RatingsNHP’s
module, supplied by a company that will ‘be around in 25 years’ time’. Unlike so many others, NHP has the history to back its
position, having performed so well since 1968.
45°C + / - 3°C
- 0.41 % / °C
- 0.31 % / °C
+0.055%/ °C
Maximum System Voltage
Series Fuse Rating
1000 V (IEC)
Hanwha QCells has been selected by NHP to manufacture the NHP Solar One module. Being of conventional 60-cell poly15 A
crystalline construction and high quality manufacture, it is well suited to the majority of industrial solar applications. Special
project order versions, validated to extreme salt-mist and ammonia environments are available on request.
Series fuse
Production lines forrating
the SolarOne
module have borrowed heavily from the respected QCells manufacturing experience, and
Maximum Reverse Current
multiplied
more especially since the formal acquisition of QCells by the Hanwha Group of companies listed on the Fortune500. Hanwha
by 1.35
is now the world’s third
largest solar manufacturer.
aracteristics
1670mm ×1000mm ×32 mm
18.5±0.5kg
• Guaranteed Quality - 12 year product warranty and 25 year linear performance warranty
• Improved efficiency - using 4BB (4-BusBar) technology
• Efficient handling - 32 mm frame for higher packing density - 32/pallet
• Anti-PID - qualified to withstand PID (Potential Induced Degradation)
• Recognised quality - manufacture by Hanwha QCells
• High reverse current rating – allows increased paralleling of strings, reducing fusing requirement
Aluminum-alloy
CAT. NO.
3.2mm tempered glass with anti reflective coating
HSL60P6 PC 1 260
EVA
Pnom STC
(W)
Voc STC
(V)
Isc STC
(A)
Connection
260
38.1
8.98
Amphenol H4 20.25
Ir Max
(A)
Mod Height
(mm)
Mod Width
(mm)
Mod Depth
(mm)
32
1000
32
Composite sheet
4 busbar Polycrystalline
156 mm × 156 mm (6 in ×6 in)
60 (6 × 10)
HSL60P6 PC 1 260
Protection class IP 67
Solar cable: 4 mm2; length: 1000 mm
H4
Packaging and Storage
o 85 °C
Storage Temperature
– 40 °C to 85 °C
at 23 m/s
Packaging Configuration
32 pieces per pallet
Loading Capacity
(40 ft. HQ Container)
832 pieces
00Pa
©Hanwha SolarOne Co., Ltd. Specifications are subject to change without notice, Release: 2014-08-01
4]
For further information please contact Sales: 1300 NHP NHP or visit nhp.com.au
DC Modules
QCells Solar Modules
QCells are known for producing the highest quality modules in the world. Q stands for Quality. The modules are manufactured
within the most comprehensive quality inspection regime, incorporating independent factory-embedded verification,
surpassing minimum standards to a high degree.
The G3 is the third generation module from QCells and has been optimised across the board for improved output yield and
higher operating reliability. Excellent low-light performance assists improved yields and is based on the Q.ANTUM cell concept.
MECHANICAL SPECIFICATION
Format
1670 mm
x 1000
mm x 35 mm
(including frame)
Built
to weather any storm,
QCells
modules
underwent
pressure testing at the Cyclone Testing1670Station at James Cook University,
150
980
QLD.
The outcomes were
Weight
19 kgimpressive. QCells proved to be strong enough to survive a 1 in 500 year cyclone in wind region C - the
most
allmm
major
Australian
cities,
including
Darwin. They passed
pressure testing above and beyond IEC standard
Front severe
Cover region for3.2
thermally
pre-stressed
glass
with
6 x Grounding points ø 4.5
testing requirements, anti-reflection
even when technology
taking safety factors into account, and they demonstrated performance well beyond that
Frame
Back Cover
Composite film
Product label
required
to meet the IEC621215
minimum of their competitors.
959.4
Frame
Anodised aluminium
1160
Cell have always led6 the
x 10 way
polycrystalline
solar cells
with
QCells
with rigorous
quality standards, anti-PID and HOT SPOT protection, linearCable
warranties
and
connectors
Junction box
110 mm x 115 mm x 23 mm
bankability.
Junction box
1000
Protection class IP67, with bypass diodes
Cable
4 mm² Solar cable; (+) ≥ 1160 mm, (-) ≥ 1160 mm
MPP
ISC
[A]
Open Circuit Voltage
VOC
[V]
PRELIMINARY
PRELIMINARY
Short Circuit Current
Pnom STC
(W)
Current
at PMPP
CAT.
NO.
Voltage at PMPP
Efficiency
Power)
QPRO
255(Nominal
G3
255
PRELIMINARY
PRELIMINARY
• Connector
German engineered
- provides
highest quality product assembled on the most advanced line
SOLARLOK
PV4,the
IP68
4 x Fastening points, long slot 8 x 16
8 x Drainage holes
• High reliability - independent real-time factory testing reduces the risk of faults arising years hence
• Cyclone rated - suited to Australian conditions allowing deployment in wind region D
• ELECTRICAL
Anti-PID and
Hot-Spot Protection - greater durability and life
CHARACTERISTICS
• PERFORMANCE
Slim designAT- STANDARD
greater packing
density for transport while maintaining strength
TEST CONDITIONS (STC: 1000 W/m², 25 ˚C, AM 1.5 G SPECTRUM)1
• NOMINAL
Guaranteed
quality - 12 year product warranty
provides excellent
bankability255
plus 25 year performance
warranty
as standard
POWER (+5 W / -0 W)
[W]
250
260
265
270
• Average
High reverse
current
rating
–
allows
increased
paralleling
of
strings,
reducing
fusing
requirements
[W]
252.5
257.5
262.5
267.5
272.5
Power
P
8.71
8.90
9.09
9.28
9.47
37.49
37.83
38.18
38.52
38.86
Voc STC Isc STC
[A]
(V)
(A)
8.21
Connection
V MPP
[V]
η
37.83
[%]
8.90
≥ 15.0 PV
SolarLok
IMPP
30.76
Ir Max
8.37
(A)
Mod Height Mod Width
Mod Depth
8.53
8.69
8.85
(mm)
(mm)
(mm)
30.78
30.79
20≥ 15.3
1670 ≥ 15.6 1000
≥ 15.9
35
265
35
30.77
30.80
≥ 16.2
PERFORMANCE AT NORMAL OPERATING CELL TEMPERATURE (NOCT: 800 W/m², 45 ± 3 ˚C. AM 1.5 G SPECTRUM)2
NOMINAL
POWER
QPRO
260
G3 (+5 W / -0 W) 260
Q.PRO-G4
Q.PRO-G4 255-265
255-265
Average Power
Short Circuit Current
QPEAK 280 G3
280
Open Circuit Voltage
I
[A]
VOC
[V]
SC
37.41
9.62
250 PV
SolarLok
20 255
186.0
7.03
MC4
20
34.90
260
1670
189.7
1000
193.4
7.18
1670
35.22
7.33
35.54
197.1
7.48
1000
35.86
270
200.8
35
7.63
36.18
IMPP
[A]
6.44
6.56
6.68
6.80
6.93
MPP
V MPP
[V]
28.89
28.92
28.94
28.97
28.99
1
Measurement tolerances STC: ± 3 % (Pmpp); ± 10 % (Isc, Voc, Impp, Vmpp)
EFFICIENCY RELATIVE TO
NOMINAL POWER [%]
RELATIVE MODULE EFFICIENCY COMPARED TO NOMINAL POWER [%]
The
Thenew
newQ.PRO-G4
Q.PRO-G4isisthe
thereliable
reliableevergreen
evergreenfor
for
allapplications.
applications.
The
Qall
CELLS
PERFORMANCEThe
WARRANTY
fourth
fourthmodule
modulegeneration
generationfrom
fromQQCELLS
CELLShas
hasbeen
been100
optimised
optimisedacross
across
97
the
theboard:
board:improved
improvedoutput
outputyield,
yield,higher
higheroperating
operatingreliability
reliabilityand
andduduMODULE
95
ESOLAR
SOLAR
rability,
rability,MODULE
quicker
quickerinstallation
installationand
andmore
moreintelligent
intelligentdesign.
design.
At least 97 % of nominal power during
first year. Thereafter max. 0.6 % degradation per year.
At least 92 % of nominal power after
10 years.
At least 83 % of nominal power after
25 years.
Q CELLS
97
95
90
90
85
80
75
0
5
10
1515
Measurement tolerances NOCT: ± 5 % (Pmpp); ± 10 % (Isc, Voc, Impp, Vmpp)
PERFORMANCE AT LOW IRRADIANCE
100
85
ehereliable
evergreen
forforallTECHNOLOGY
applications.
ANTI-REFLECTIVE
ANTI-REFLECTIVE
COATING
COATING
TECHNOLOGY
TECHNOLOGY
INNOVATIVE
INNOVATIVE
ALL-WEATHER
ALL-WEATHER
TECHNOLOGY
reliable
evergreen
all
applications.The
The
n from
Q QCELLS
• •Reduction of light reflection by 50 %,
Reduction of light reflection by 50 %,
• •Maximum yields with excellent lowMaximum yields with excellent low80
ion
from
CELLShas
hasbeen
beenoptimised
optimisedacross
across
plus long-term corrosion resistance
plus long-term corrosion resistance
light and temperature behaviour.
light and temperature behaviour.
put
higher
tputyield,
yield,
higheroperating
operatingreliability
reliabilityand
anddudu75
due to high quality Sol-Gel roller coatdue to high quality Sol-Gel roller coation and
more
intelligent
design.
ation
and
more
intelligent
design.
5
10
ing processing.
ing processing. 0
RELIABILITY
RELIABILITYAND
ANDHIGH
HIGHPERFORMANCE
PERFORMANCE
2
20
20
25
25
YEARS
All data within measurement tolerances.
Full warranties in accordance with the
warranty terms of the Q CELLS sales
organisation of your respective country.
RELATIVE
EFFICIENCY
Relative
efficiency[%]
[%]
QPEAK 280 G3
[W]
9.09
[W]
Current at PMPP
POLYCRYSTALLINE
POLYCRYSTALLINESOLAR
SOLARMODULE
MODULE Voltage at P
G4
G4 255-265
255-265
38.18
PMPP
105
100
95
90
85
80
100
200
300
400
500
600
700
800
900
1000
Irradiance [W/m²]
IRRADIANCE [W/m²]
The typical change in module efficiency at an irradiance of 200 W/m² in relation
• •Long-term Yield Security due to Anti
Long-term Yield Security due to Anti
to 1000 W/m² (both at 25 °C and AM 1.5 G spectrum) is -2 % (relative).
1 1
LIGHTWEIGHT
LIGHTWEIGHTQUALITY
QUALITYFRAME
FRAME
PID Technology
, Hot-Spot Protect,
, Hot-Spot Protect,
ANTI-REFLECTIVE
COATING
TECHNOLOGY
NOLOGYPID Technology
ANTI-REFLECTIVE
COATING
TECHNOLOGY
CHNOLOGY
• •Stability at wind loads of up to
Stability at wind loads of up to
and Trace aReduction of light reflection by 50 %,
ble Quality Tra.Q™.
• aReduction of light reflection by 50 %,
t low- and Trace •ble Quality Tra.Q™.
ent lowTEMPERATURE COEFFICIENTS (AT 1000 W/M2, 25 °C, AM 1.5 G SPECTRUM)
4000 Pa with a module weight of just
Long-term stability due to VDE Quality
plus long-term corrosion resistance
our.
plus long-term corrosion resistance4000 Pa with a module weight of just
viour.• •Long-term stability due to VDE Quality
Format
1670
mm x 1000
mm ofx I35
mm (including
frame)
[%
/ K]
+ 0.04
Temperature Coefficient of1670
VOC
[% / K]
− 0.30
Temperature
Coefficient
α
β
18,8 kg due to slim frame design with
18,8 kg due to slim frame design with
Tested – the strictest test program.
Tested – the strictest test program.
due to high quality Sol-Gel roller coatSC
due to high quality Sol-Gel roller coat150
high-tech alloy.
high-tech alloy.
980
ing processing.
MANCE
[% / K]
− 0.42
Coefficient of PMPP
γ
ing processing.
RMANCE
Weight
19Temperature
kg
SAFE
SAFEELECTRONICS
ELECTRONICS
to Anti
ue to Anti
MAXIMUM
MAXIMUMCOST
COST
REDUCTIONS
REDUCTIONS
• •Protection against short circuits and
Protection against short circuits and
LIGHTWEIGHT
QUALITY
Front FRAME
Cover
3.2
mm
thermally
glass with
otect,
6 x Grounding points ø 4.5
LIGHTWEIGHT
QUALITY
FRAME
Protect,
PROPERTIES
FORpre-stressed
SYSTEM DESIGN
Up to 10 % lower logistics costs due to
thermally induced power losses due
thermally induced power losses due
• Stability at wind loads of up to
.™.
anti-reflection technology
• Stability at wind loads of up to • •Up to 10 % lower logistics costs due to
Maximum
System
Voltage
V
[V]
Safety Class
II
1000
SYS
higher module capacity per box.
higher module capacity per box.
to breath to breath a
ble junction box and welded
a
ble junction box and welded
4000 Pa with a module weight of just
E Quality
Frame
4000 Pa with a module weight of just
VDE Quality
YIELD
YIELD
SECURITY
SECURITY
Back Cover
Composite
film Current I
[A]
20
Fire Rating Product label
C
Maximum Reverse
cables.
cables.
18,8 kg due to slim frame design with
gram.
R
18,8 kg due to slim frame design with
rogram.
ANTI
ANTI
PIDPID
TECHNOLOGY
TECHNOLOGY
959.4
(APT)
(APT)
EXTENDED
EXTENDED
WARRANTIES
WARRANTIES
high-tech alloy.
Frame
Anodised
aluminium
Wind
/
Snow
Load
[Pa]
5400
Permitted
module
temperature
on
continuous
-40
°C
up
to +85 °C
high-tech alloy.
HOT-SPOT
HOT-SPOT
PROTECT
PROTECT
1160
• •Investment security due to 12-year
Investment security due to 12-year
(HSP)
(HSP)
(in accordance with IEC 61215)
duty
Cell
6 x 10 polycrystalline solar cells
TRACEABLE
TRACEABLE
QUALITY
QUALITY
Cable with
product warranty and 25-year linear
product warranty and 25-year linear
MAXIMUM
COST
REDUCTIONS
its and
1000
MAXIMUM
COST
REDUCTIONS
cuits and
(TRA.Q
(TRA.Q
™)™)
connectors
2 2
performance warranty
performance warranty
..
• Up to 10 % lower logistics costs due to
es due
• Up to 10 % lower logistics costs due to
sses due
Junction box
110
mm x 115
mm xAND
23 mm
QUALIFICATIONS
CERTIFICATES
PARTNER
Junction
box
higher module capacity per box.
d welded
higher module capacity per box.
and welded
YEARS
Protection
class IP67,
with
diodes
VDE Quality Tested,
IEC 61215
(Ed.bypass
2); IEC 61730
(Ed. 1, Ed. 2), Application class A.
YIELD SECURITY
YIELD SECURITY
Cable
EXTENDED
WARRANTIES
EXTENDED
WARRANTIES
• Investment security due to 12-year
• Investment security due to 12-year
Connector
product warranty and 25-year linear
product warranty and 25-year linear
2
performance warranty
. 2.
performance warranty
MOD:27898
MOD:27898
ANTI PID TECHNOLOGY
(APT)ANTI PID TECHNOLOGY
(APT)
HOT-SPOT PROTECT
(HSP)HOT-SPOT PROTECT
(HSP)
TRACEABLE QUALITY
TRACEABLE
QUALITY
(TRA.Q
™)
(TRA.Q ™)
SOLARLOK PV4, IP68
THE
THEIDEAL
IDEALSOLUTION
SOLUTIONFOR:
FOR:
Rooftop arrays on Rooftop arrays on commercial / induscommercial / industrial buildings
trial buildings
photon.info/laboratory
photon.info/laboratory
data
sheetcable;
complies(+)
with≥DIN
EN 50380.
4 This
mm²
Solar
1160
mm,Tested
(-) ≥ 1160 mm
Quality
Quality
Tested
MOD:27898
Ground-mounted Ground-mounted Rooftop arrays on Rooftop arrays on ELECTRICAL
CHARACTERISTICS
solar power plants
solar power plants
residential buildings
residential buildings
Quality Tested
Quality Tested
high reliability

high reliability
 degradation
 low
 low degradation
 frequent
 frequent
product
surveillance
reliability
reliability
 high
 high
degradation
degradation
 low
 low
 frequent
 frequent
Best
Best
polycrystalline
polycrystalline
solar
solar
module
module
2013
2013
product
product
surveillance
surveillance
Q.PRO-G2
Q.PRO-G2
235235
ID.ID.
40032587
40032587
151151
modules
modules
tested
tested
4 x Fastening points, long slot 8 x 16
8 x Drainage holes
photon.info/laboratory
MOD:27898
photon.info/laboratory
Best polycrystalline
polycrystalline
solarBest
module
2013
solar module 2013
PERFORMANCE AT STANDARD TEST CONDITIONS (STC: 1000 W/m², 25 ˚C, AM 1.5 G SPECTRUM)1
product surveillance
Q.PRO-G2 235
Q.PRO-G2 235
151 modules tested
NOTE:
Installation instructions
must be followed. See the installation and operating manual or contact our technical service department for further information on approved installation
151 modules tested
ID. 40032587
ID. 40032587
NOMINAL POWER (+5 W / -0and
W)use of this product.
APT test conditions: Cells at -1000 V against grounded, with conductive metal foil covered module surface, APT test conditions: Cells at -1000 V against grounded, with conductive metal foil covered module surface, 25 °C, 168 h
25 °C, 168 h
2 2
See data sheet on rear for further information.
See data sheet on rear for further information.
Average Power
Hanwha Q CELLS Australia Pty LtdP
1 1
250
255
260
For further information please [W]
contact Sales: 1300
NHP NHP or
visit nhp.com.au
MPP
[W]
252.5
257.5
262.5
265
270
5]
267.5
272.5
pecifications subject to technical changes © Hanwha Q CELLS GmbH Q.PRO-G3_2014-05_Rev05_AU
MECHANICAL SPECIFICATION
Three Phase Inverters
Huawei 3PH Premium Solar Inverters
Huawei is new to the Australian solar market and presents the latest in design and performance. With a workforce of 70,000
committed to R&D alone, Huawei submitted their SUN2000 inverter to Photon magazine for testing. It rated A+, achieving a
top 3 position out of the 140 inverters tested, upon its first attempt. All the more remarkable given Huawei’s technology is
not reliant on expensive SiC transistors.
Outdoor IP65 rated, the Huawei SUN2000 inverters are provided with RS485 and USB communications ports.
The freely available monitoring software, iManager NetEco 1000S, provides powerful PC-based monitoring platform including
plant overview up to 6 inverters via RS485, and additionally, can be accessed via web browser thus allowing remote access,
monitoring in real time, alarm communications, firmware upgrade and inverter log acquisition. Remote access is user friendly,
APP supported, while alarm messages can be via SMS or email.
Earth fault alarm requirements set by IEC62109 are similarly supported.
The optional SmartLogger device completes an industrial solar plant layout and features embedded webserver, environmental
I/O, LCD, 10y data-logging and 60 inverter support capacity.
• Greater than 98% efficiency - provides maximum performance for all models
• Wide operating window – 200 to1000 V DC max input for non-domestic 3-phase applications
• Range of power ratings - ranging from 8 - 23 kW are adaptable to large or complex industrial plants, with a special 28kW unit
available with higher voltage output suiting transformer boost to MV connection
• Up to 3 MPPT – versatile adaption to different module types
• Up to 6 inputs – intelligent monitoring and fault detection
• Extra low noise - quiet running (≤29dB) unlike the 60dB typical of competitors
• Power limiting option - allows solutions for limited or zero export therefore meeting some Australian local connection
constraints
• Integrated type II DC and AC surge protection – reducing project costs and adding valuable protection
• Long Warranty – up to 25 years peace of mind extended warranty available
SUN2000 Series
-8/10/12/15/17/20/23KTL
Inverters
CAT. NO.
Output power
(w)
Comms
Max. efficiency
(%)
Inputs
#MPPTs
OpTempMax
(°C)
SUN2000 8KTL
8000
RS485
98.5
4
2
60
SUN2000 10KTL
10000
RS485
98.5
4
2
60
SUN2000 12KTL
12000
RS485
98.5
4
2
60
SUN2000 15KTL
15000
RS485
98.6
6
3
60
SUN2000 17KTL
17000
RS485
98.6
6
3
60
SUN2000 20KTL
20000
RS485
98.6
6
3
60
SUN2000 23KTL
23000
RS485
98.6
6
3
60
SUN2000 28KTL
27500
RS485
98.6
6
3
60
SUN2000 10KTL
The Solar Power Magazine
International
The Solar Power Magazine
International
Huawei Technologies Sun2000-20KTL
Huawei Technologies Sun2000-20KTL
A+
A+
98.1 % at high irradiation
www.photon.info
3/2013
98.0% for medium irradiation
3/2013
www.photon.info
SUN2000
-8KTL / 10KTL / 12KTL / 15KTL / 17KTL / 20KTL / 23KTL
6]
The maximum efficiency of SUN2000 is up to 98.6%. The performance is good at medium and high irradiation, which helps
For further
information
contact
NHP
NHPmaximally
or visit
nhp.com.au
SUN2000-20KTL
rank A+/A+please
in Photon efficiency
test.Sales:
This series1300
of products
supports
3 MPPT
for versatile adaption to
different module types or quantities built up with different alignments. Natural cooling technology makes SUN2000 more reliable,
400
Input
EMI
Filter
MPPT circuit 1
Out
EMI
Filter
MPPT circuit 2
Input current DC Switch
check circuit
DC-AC
converter
L1
L2
L3
N
PE
Output
isolation relay
DC SPD
LC filter
AC SPD
SUN2000 8KTL/10KTL/12KTL
MPPT circuit 1
620
800
Input
EMI
Filter
Vmpp
80%
L1
L2
L3
N
Out
EMI
Filter
MPPT circuit 2
100%
DC-AC
converter
PE
Output
isolation relay
LC filter
AC SPD
MPPT circuit 3
Input current
check circuit
DC
Switch
DC SPD
SUN2000 15KTL/17KTL/20KTL/23KTL
Huawei’s 3xMPPT SLD
4
SmartLogger
Huawei Smart Logger is the web-server communications hub of an industrial solar PV plant, acting as both a monitoring
and management platform. It offers real time operating status plus complete interface aggregation, protocol conversion,
data acquisition, data storage and centralized charting.
For plants featuring more than 6 Huawei inverters, the SmartLogger is essential monitoring equipment but may be used on
smaller systems to real advantage in any case.
SmartLogger works in conjunction with Huawei’s monitoring software package, iManager NetEco 1000S, provided. Remote
access is user friendly, APP supported, while alarm messages can be sent via SMS or email.
CAT. NO.
Comms
OpTempMax
(°C)
Max
Slaves
#Anlg
In
#Dig
In
Memory
(OnBoard)
#RlyOut
Power
Supply
SUN2000 SMART
EtherNet/IP, Modbus RTU (Serial),
Modbus TCP (Ethernet), RS485
60
60
2
4
32 MB
3
100-240 V AC,
Single Phase
iManager
Structure
iManager
structure
SUN2000 SMART
NetEco 1000S
IE
Email, EMS Alarm
Grid management center
Network
SUN2000
Smart Logger
SUN8000
Smart Logger
RS48S/232
TCP/IP
SUN2000
SUN8000
Environment
monitor
SUN2000
SUN8000
For further information please contact Sales: 1300 NHP NHP or visit nhp.com.au
Environment
monitor
7]
Roof and Ground Mounting Systems
Clenergy Solar Mounting Systems
Clenergy’s mounting system products are universally recognised for their high quality, innovative design and ease of
deployment.
A large variety of roof hooks, tin roof fixings, tilt legs and adapters help ensure that you will find a suitable fixing method
for almost every roof, in every climate zone. Penetrative and non-penetrative solutions are offered, plus a variety of ground
mount and post mount.
NHP will assist designers to assemble BOMs for larger projects and schedule drop deliveries at project sites. • Extended product range – Suitable for any application, including engineered solutions
• Australian certification - Confidence the product suits local conditions
• Excellent product documentation - Assists efficient project management
• Online design and visualisation tools - Available to assist engineering and sales effort
Clenergy PV-ezRack SolarRoof
Clenergy’s Solar Roof includes the 3 mainstream roof-mounted solutions for tin roof, tiled roof and common tilt frame on
tin roof.
ezRack Standard Rail
CAT. NO.
Description
ER-R-ST2560
PV-ezRACK STD RAIL 2560 MM QTY2
ER-R-ST3405
PV-ezRACK STD RAIL 3405 MM QTY2
ER-R-ST4200
PV-ezRACK STD RAIL 4200 MM QTY2
ER-SP-ST
SPLICE 200 MM FOR STD RAIL QTY2
ER-R-ST2560
Clenergy PV-ezRack SolarTripod Commercial Roof Mounted Tilt Frame
Clenergy’s Solar Tripod product differs from the ezRack Solar Roof adjustable tilt leg system. The tripod is suited to commercial
roofs where its solid design and pre-assembled structure assist in speeding up the installation of a tilted array. The Tripod system
uses a different profile (the T50) but works with Clenergy’s standard mid and end clamps.
ER-R-T50/2560
8]
CAT. NO.
Description
ER-R-T50/2560
T-RAIL 50 2560 MM
ER-R-T50/3405
T-RAIL 50 3405 MM
ER-R-T50/4200
T-RAIL 50 4200 MM
ER-RC-T/G
T-RAIL CLAMP WITH GROUNDING
ER-S-TRI/D30
TRIPOD 30 DEG DOUBLE
ER-S-TRI/S15-30
TRIPOD ADJUST 15 to 30 DEG SINGLE 1350 MM BASE
ER-S-TRI/S30-AU
TRIPOD 30 DEG SINGLE WITH 1350 MM BASE SUPPORT
ER-SP-T50
SPLICE T-RAIL 50
For further information please contact Sales: 1300 NHP NHP or visit nhp.com.au
Clenergy PV-ezRack SolarTerrace
SolarTerrace ground mounting solutions allow for different soil types and can rely on rammed post, concrete footing or ground
screw technology. Soil may vary as to its packing, its rock content and even to its corrosive status. Solar Terrace can provide
mounting for a few kW all the way to multi-MW large scale PV plants.
Clenergy’s rail profile T110 forms the basis of the Solar Terrace solution.
PV-ezRack T- Rail
EzRack T110 rail is utilsed in both the SolarTerrace II and III mounting systems. Dedicated rail caps and splices are available to
suit, while Clenergy’s regular mid and end clamps mate with the T110 rail via their innovative Z-module nuts.
CAT. NO.
Description
ER-R-T110/4200
T-RAIL 110 4200 MM
ER-R-T110/5200
T-RAIL 110 5200 MM
ER-SP-T110
T-RAIL 110 SPLICE
ER-R-T110/4200
SolarTerrace II Ram-Type Ground Mounts
Solar Terrace II features ram post, post head and brace. Together, these form the uprights for the terrace rows, to which the
pre-assembled array supports are attached. The posts are designed with a unique profile which allows reduced embedment,
thus reducing labour. 80micron hot dip galvanisation and 10micron anodisation layer ensure long life.
CAT. NO.
Description
ER-S-STII/30-AU
SOLAR TERRACE II 30DEG SUPPORT
ER-S-STII/30-AU
SolarTerrace III Footing-Type Ground Mounts
Universal ground mount frame for corrosive environments and tough soil conditions. Solar Terrace III can be mounted on footings or ground screws, or be installed with concrete ballast thus allowing a non-penetrative solution.
CAT. NO.
Description
ER-S-STIII/30-AU
SOLAR TERRACE III 30DEG SUPPORT
ER-S-STIII/30-AU
For further information please contact Sales: 1300 NHP NHP or visit nhp.com.au
9]
Clenergy PV-ezRack PostMount Kits
Clenergy post mounts are preconfigured kits supporting 2 to 8 panels on a single post. They are packed and shipped in kit form.
Ideal for remote off-grid applications supporting 2 to 8 panels. Arrays can be adjusted for tilt between 0 and 60 degrees
throughout the year. Materials are aluminium, stainless steel and galvanised steel resulting in a robust reliable system with
excellent corrosion resistance.
CAT. NO.
Description
ER-PM2-A
POSTMOUNT2 PV-ezRACK KIT
ER-PM3-A
POSTMOUNT3 PV-ezRACK KIT
ER-PM4-A
POSTMOUNT4 PV-ezRACK KIT
ER-PM6-A
POSTMOUNT6 PV-ezRACK KIT
ER-PM2-A
Panel Clamps
The Clenergy mounting system offers a range of clamp sizes to suit different solar module thicknesses. End clamps must match
the module frame exactly while the mid clamps provide some tolerance. Clamp screws are manufactured in stainless steel.
Clamps rely on Clenergy’s innovative Z-module technology. Simply put, these small threaded modules act as the clamp nuts,
and are easily inserted into the rail in any point and innitially locked by hand. This technology is patented by Clenergy.
End Clamps
CAT. NO.
Description
ER-EC-32
END CLAMP 32 MM
ER-EC-35
END CLAMP 35 MM
ER-EC-40
END CLAMP 40 MM
ER-EC-50
END CLAMP 50 MM
ER-EC-32
Mid Clamps
CAT. NO.
Description
ER-IC-35
MID CLAMP 35 MM
ER-IC-40
MID CLAMP 40 MM
ER-IC-50
MID CLAMP 50 MM
ER-IC-35
10]
For further information please contact Sales: 1300 NHP NHP or visit nhp.com.au
Roof Interfaces
There are a number of different roof types in the Australian market and there are a range of interface brackets available from
Clenergy to ensure the best structural mounting solution to suit roof types. Installers should determine exact roof profile early
in a project to avoid incorrect product choice.
Tin Interfaces
CAT. NO.
Description
ER-AD-C110
ADAPTOR PV-ezRACK DOUBLE CORRUGATED
ER-I-05
TIN INTERFACE LEG
ER-I-09
TIN INTERFACE KLIP-LOK
ER-I-29/AU
TIN INTERFACE LONGLINE
ER-AD-C110
Tile Interfaces
CAT. NO.
Description
ER-I-01
TILE INTERFACE ROOF HOOK
ER-I-02
TILE INTERFACE ROOF HOOK FLAT
ER-I-04
SLATE INTERFACE ROOF HOOK
ER-I-23
TILE INTERFACE ROOF HOOK LANDSCAPE
ER-I-26
TILE INTERFACE ROOF HOOK SIDEMOUNT
ER-RE-200
ROOF HOOK EXTENDER
ER-I-01
Tilt Interfaces
CAT. NO.
Description
ER-TL-10/15
TILT SET ADJUSTABLE 10-15 DEG
ER-TL-15/30
TILT SET ADJUSTABLE 15-30 DEG
ER-TL-30
TILT SET 30 DEG FIXED
ER-TL-30/60
TILT SET ADJUSTABLE 30-60 DEG
ER-TL-15/30
For further information please contact Sales: 1300 NHP NHP or visit nhp.com.au
11]
Accessories
Cable management accessories, end caps for improved aesthetics and frame earthing components are available to complete
the Clenergy mounting range.
CAT. NO.
Description
ER-CAP-ST
CAP FOR PV-ezRACK RAIL
ER-CAP-T110
CAP FOR T-RAIL T110
ER-CAP-T50
CAP FOR T-RAIL 50
ER-DM-MT8
M8 BOLT NUT TO SUIT MATRIX RAIL
ER-Z-STBW
BOLT NUT Z MODULE TO SUIT WILEY LUG
EZ-CC-PV/4
CABLE CLIP PV-ezRACK 4 CABLE
EZ-CC-R/ST/6
CABLE CLIP FOR 6 CABLES
EZ-CC-TR
CABLE CLIP FOR TRAIL
EZ-GC-ST
GROUNDING CLAMP STD PV-ezRACK
EZ-GL-ST
GROUNDING LUG STD PV-ezRACK
EZ-IB-SR240/100
ISOLATOR BRACKET PV-ezRACK 240 x 100
EZ-RB-65/20000/2
STRIP EPDM PV-ezRACK
EZ-RB-65/45/12
RUBBER PAD EPDM PV-ezRACK
ER-CAP-ST
1. Determine the wind region of your installation site
1. Determine the wind region of your installation site
12]
Region Definition:
Region Definition:
Wind regions are pre-defined for all of Australia by the Australian Standard
Wind regions are pre-defined for all of Australia by the Australian Standard
1170.2. The Wind Region is an independent factor of surrounding topography or
1170.2. The Wind Region is an independent factor of surrounding topography or
buildings.
buildings.
 Most of Australia is designated Region A which indicates a Regional
 Most of Australia is designated Region A which indicates a Regional
Ultimate
Basiccontact
Wind Velocity
of 45m/s.
For further information
please
1300
NHP
NHP or visit nhp.com.au
Ultimate
Basic WindSales:
Velocity
of
45m/s.
 Some areas are designated Region B (57m/s). Local authorities will advise
 Some areas are designated Region B (57m/s). Local authorities will advise
Renewable energy solutions that make a difference…
With expert knowledge of
renewable technologies that is
brought to life through a global
network of supply partners, NHP
offer complete solutions that are
cost effective, promise long-term
savings and impressive financial
returns.
When you choose NHP as
your supplier, you are not only
choosing quality that lasts but
NHP ELECTRICAL ENGINEERING PRODUCTS PTY LTD
Sales 1300 NHP NHP | nhp.com.au |
protecting the environment and
working towards a sustainable
future.
Scan the QR code to visit the NHP
Solutions City where you can
view exclusive Renewable Energy
video content, case studies and
literature!
Scan the QR code to visit
NHP Solutions City to view
exclusive video content,
case studies and literature,
or visit nhp.com.au
EASY TO DO
BUSINESS WITH
For further information please contact Sales: 1300 NHP NHP or visit nhp.com.au
NRENEWABLEADV 5/14
NHP are at the forefront
of an industry where
Renewable Energy is
vital to the sustainability
and ultimate success of a
project. Our promise to be
easy to do business with is
matched with an ongoing
commitment to a sustainable
electrical industry.
13]
Solar Kits
Solar Kits
Solar Kits from NHP include all the main items (non-consumables) for solar systems up to 20 kW.
• Preconfigured - guarantees correct matching of inverter to PV array
• Shipped in full – complete kit where and when you need it
• Choice of module and inverter brands – Flexible options
• Complete kit - Includes modules, inverters, mounting system, AC and DC isolators, MCB, labels and dektites
Kits with Huawei Inverters and NHP Solar One Modules
10.4kW
PV S 10400 H 1
CAT. NO.
Description
PV S 10400 H 1
SOLARONE 10.4 kW HUAWEI TIN 2xSTRGS13 + 1x14
PV S 10400 H 2
SOLARONE 10.4 kW HUAWEI TILT LEG 15-30 DEG 2xSTRGS13 + 1x14
PV S 10400 H 3
SOLARONE 10.4 kW HUAWEI TRIPOD FIXED 30 DEG 2xSTRGS13 + 1x14
PV S 10400 H 4
SOLARONE 10.4 kW HUAWEI TRIPOD ADJ15-30 DEG 2xSTRGS13 + 1x14
PV S 10400 H 5
SOLARONE 10.4 kW HUAWEI TILE 2xSTRGS13 + 1x14
15.6kW
PV S 15600 H 1
CAT. NO.
Description
PV S 15600 H 1
SOLARONE 15.6 kW HUAWEI TIN 3xSTRINGS OF 20
PV S 15600 H 2
SOLARONE 15.6 kW HUAWEI TILT LEG 15-30 DEG 3xSTRINGS OF 20
PV S 15600 H 3
SOLARONE 15.6 kW HUAWEI TRIPOD FIXED 30 DEG 3xSTRINGS OF 20
PV S 15600 H 4
SOLARONE 15.6 kW HUAWEI TRIPOD ADJ15-30 DEG 3xSTRINGS OF 20
PV S 15600 H 5
SOLARONE 15.6 kW HUAWEI TILE 3xSTRINGS OF 20
20.8kW
PV S 20800 H 1
14]
CAT. NO.
Description
PV S 20800 H 1
SOLARONE 20.8 kW HUAWEI TIN 4xSTRINGS OF 20
PV S 20800 H 2
SOLARONE 20.8 kW HUAWEI TILT LEG 15-30 DEG 4xSTRINGS OF 20
PV S 20800 H 3
SOLARONE 20.8 kW HUAWEI TRIPOD FIXED 30 DEG 4xSTRINGS OF 20
PV S 20800 H 4
SOLARONE 20.8 kW HUAWEI TRIPOD ADJ15-30 DEG 4xSTRINGS OF 20
PV S 20800 H 5
SOLARONE 20.8 kW HUAWEI TILE 4xSTRINGS OF 20
For further information please contact Sales: 1300 NHP NHP or visit nhp.com.au
Solar Kits
Solar Kits
Solar Kits from NHP include all the main items (non-consumables) for solar systems up to 20 kW.
• Preconfigured - guarantees correct matching of inverter to PV array
• Shipped in full – complete kit where and when you need it
• Choice of module and inverter brands – Flexible options
• Complete kit - Includes modules, inverters, mounting system, AC and DC isolators, MCB, labels and dektites
Kits with Huawei Inverters and QCells G3 Modules
10.2kW
PV Q 10200 H 1
CAT. NO.
Description
PV Q 10200 H 1
QCELL 10.2 kW HUAWEI TIN 2xSTRGS13 + 1x14
PV Q 10200 H 2
QCELL 10.2 kW HUAWEI TILT LEG 15-30 DEG 2xSTRGS13 + 1x14
PV Q 10200 H 3
QCELL 10.2 kW HUAWEI TRIPOD FIXED 30 DEG 2xSTRGS13 + 1x14
PV Q 10200 H 4
QCELL 10.2 kW HUAWEI TRIPOD ADJ15-30 DEG 2xSTRGS13 + 1x14
PV Q 10200 H 5
QCELL 10.2 kW HUAWEI TILE 2xSTRGS13 + 1x14
15.3kW
PV Q 15300 H 1
CAT. NO.
Description
PV Q 15300 H 1
QCELL 15.3 kW HUAWEI TIN 3xSTRINGS OF 20
PV Q 15300 H 2
QCELL 15.3 kW HUAWEI TILT LEG 15-30 DEG 3xSTRINGS OF 20
PV Q 15300 H 3
QCELL 15.3 kW HUAWEI TRIPOD FIXED 30 DEG 3xSTRINGS OF 20
PV Q 15300 H 4
QCELL 15.3 kW HUAWEI TRIPOD ADJ15-30 DEG 3xSTRINGS OF 20
PV Q 15300 H 5
QCELL 15.3 kW HUAWEI TILE 3xSTRINGS OF 20
20.4kW
PV Q 20400 H 1
CAT. NO.
Description
PV Q 20400 H 1
QCELL 20.4 kW HUAWEI TIN 4xSTRINGS OF 20
PV Q 20400 H 2
QCELL 20.4 kW HUAWEI TILT LEG 15-30 DEG 4xSTRINGS OF 20
PV Q 20400 H 3
QCELL 20.4 kW HUAWEI TRIPOD FIXED 30 DEG 4xSTRINGS OF 20
PV Q 20400 H 4
QCELL 20.4 kW HUAWEI TRIPOD ADJ15-30 DEG 4xSTRINGS OF 20
PV Q 20400 H 5
QCELL 20.4 kW HUAWEI TILE 4xSTRINGS OF 20
For further information please contact Sales: 1300 NHP NHP or visit nhp.com.au
15]
Cables and Connectors
Huber+Suhner Radox Solar Cable
Huber+Suhner Radox Solar Cable from Switzerland.
• PV1-F rated - complies with AS/NZS5033:2014
• Single-core only - ensures double insulation as close to cable terminations as possible
CAT. NO.
OpTempMax
(°C)
Description
Colour
Roll length
(m)
WireSize
RADOX4EARTH
NA
EARTH CABLE 4 MM 100 M YEL-GRN
GREEN & YELLOW
(EARTH)
100
4 mm²
RADOX6EARTH
NA
EARTH CABLE 6MM 100 M YEL-GRN
GREEN & YELLOW
(EARTH)
100
6 mm²
RADOXDC4CABLE
90
SOLAR DC CABLE 4 MM 100 M PV1-F
BLACK
100
4 mm²
RADOXDC6CABLE
90
SOLAR DC CABLE 6 MM 100 M PV1-F
BLACK
100
6 mm²
RADOXDC4CABLE
16]
For further information please contact Sales: 1300 NHP NHP or visit nhp.com.au
Cables and Connectors
Solar PV Connectors & Accessories
Solar PV connectors to suit a range of solar modules, inverters and combiner boxes.
The H4 range suit NHP’S Solar One modules, the PV4 range suit QCells G3 modules while the YSOL range suit QCells earlier
G2 modules.
• Like-for-like brand – complies with AS/NZS5033:2014
Solar Connectors
IS 14110
CAT. NO.
IP
Ie
(A)
Gender
OpTempMax
(°C)
Ue Rated
(V DC)
MaxWire
Description
H4 CFC4D CS
IP68,
IP2X
40
Female
90
1000
6 mm²
CONNECTOR AMPHENOL H4 FEMALE
H4 CMC4D CS
IP66,
IP2X
40
Male
90
1000
6 mm²
CONNECTOR AMPHENOL H4 MALE
IS 14110
IP67
25
Male
85
1000
6 mm²
PV PANEL CONNECTOR LINE 4, 4-6 MM CABLE,MALE
IS 14240
IP67
25
Male
85
1000
6 mm²
PV CABLE CONNECTOR LINE 4, 4-6 MM CABLE,MALE
IS 24111
IP67
25
Female
85
1000
6 mm²
PV PANEL CONNECTOR LINE 4, 4-6 MM CABLE,FEMALE
IS 24241
IP67
25
Female
85
1000
6 mm²
PV CABLE CONNECTOR LINE 4, 4-6 MM CABLE,FEMALE
PV4 FEMALE
IP67
25
Female
115
1000
6 mm²
PV4 FEMALE CONNECTOR
PV4 MALE
IP67
25
Male
115
1000
6 mm²
PV4 MALE CONNECTOR
YSOL4 FAT FEMALE
IP67
30
Female
85
1000
6 mm²
CONNECTOR 4MM Q SOLAR FEMALE
YSOL4 FAT MALE
IP67
30
Male
85
1000
6 mm²
CONNECTOR 4MM Q SOLAR MALE
Connector Tools
CAT. NO.
Description
H4 TC0002
TOOL CRIMP CONNECTOR H4
H4 TW0001
TOOL WRENCH CONNECTOR H4
PV4 TOOL
PV4 CONNECTOR FIELD TOOL
PV4 TOOL
For further information please contact Sales: 1300 NHP NHP or visit nhp.com.au
17]
Combiner Boxes
DC Solar String Boxes, Fuse Boxes and Combiner Boxes
NHP provides string boxes either assembled or in kit form. Options and specification are wide ranging.
• Quality Cabur LINE4 panel connectors - allowing quick installation
• 1000 V DC rating - suitable for non-domestic applications
• UV stabilised FIBOX enclosures – suitable for harsh Australian conditions
• Engineered solutions available - options for isolators, SPDs, metering and fuses
SBPVL4F210
18]
CAT. NO.
Description
SBPVL4F210
PV 2 STRING FUSE BOX, 10 A, 1000 V DC, IP65
SBPVL4F216
PV 2 STRING FUSE BOX, 16 A, 1000 V DC, IP65
SBPVL4F220
PV 2 STRING FUSE BOX, 20 A, 1000 V DC, IP65
SBPVL4F310
PV 3 STRING FUSE BOX, 10 A, 1000 V DC, IP65
SBPVL4F316
PV 3 STRING FUSE BOX, 16 A, 1000 V DC, IP65
SBPVL4F320
PV 3 STRING FUSE BOX, 20 A, 1000 V DC, IP65
SBPVL4F410
PV 4 STRING FUSE BOX, 10 A, 1000 V DC, IP65
SBPVL4F416
PV 3 STRING FUSE BOX, 16 A, 1000 V DC, IP65
SBPVL4F420
PV 4 STRING FUSE BOX, 20 A, 1000 V DC, IP65
SBPVL4F510
PV 5 STRING FUSE BOX, 10 A, 1000 V DC, IP65
SBPVL4F516
PV 5 STRING FUSE BOX, 16 A, 1000 V DC, IP65
SBPVL4F520
PV 5 STRING FUSE BOX, 20 A, 1000 V DC, IP65
For further information please contact Sales: 1300 NHP NHP or visit nhp.com.au
PV Distribution boards
For the connection of multiple inverters (Invertor Energy Systems IES)
The NHP range of Concept Plus PV distribution boards allow for quick connection of multiple IES. The 3 phase encapsulated
busbar system provides secure mounting platform and connection system for the NHP DIN-T range of MCBs. PV DB’s come
complete with lockable isolator submain switch, IEC MCB main switches, non-captive locks and labels.
There are many options available such as MCCB as submain main switch, captive locking options, energy metering,
protection relays and larger enclosures.
• Models from 12 pole to 96 pole
• Standard AS/NZS4777.1
• Standard AS/NZS3439.3
• 3 Phase inverters
• Lockable main switch options
• Main switch ratings 63-250 A
• Indoor (grey) and outdoor (orange) options
When design requirements go beyond the use of standard PV distribution boards, NHP will engineer and build
solutions to your exacting rerquirements.
The production of customised panel boards has formed the bulk of activity of NHP’s Laverton facility for over
a decade.
Grid protection relays, metering, contactors, PLCs and surge protection readily included with the MCBs fitted
to a choice of chassis including Grizz-Bar.
For further information please contact Sales: 1300 NHP NHP or visit nhp.com.au
19]
System
IES
Qty IES
IES M/
Switch
3P MCB
60kW
20kW
3
32A
75kW
25kW
3
80kW
20kW
100kW
Busbar
Rating
Poles
100A
100A
12
40A
100A
100A
4
32A
160A
25kW
4
40A
120kW
30kW
4
100kW
20kW
125kW
Enclosure
(indoor/outdoor)
Indoor CAT.NO.
Outdoor CAT.NO.
CSB12ST
PVDB12-100-3-32-IW
N/A
12
CSB12ST
PVDB12-100-3-40-IW
N/A
250A
18
CDT18G2/CPD18OO2
PVDB18-160-4-32-IG
PVDB18-160-4-32-OO
160A
250A
18
CDT18G2/CPD18OO2
PVDB18-160-4-40-IG
PVDB18-160-4-40-OO
50A
160A
250A
18
CDT18G2/CPD18OO2
PVDB18-160-4-50-IG
PVDB18-160-4-50-OO
5
32A
160A
250A
18
CDT18G2/CPD18OO2
PVDB18-160-5-32-IG
PVDB18-160-5-32-OO
25kW
5
40A
160A
250A
18
CDT18G2/CPD18OO2
PVDB18-160-5-40-IG
PVDB18-160-5-40-OO
150kW
30kW
5
50A
250A
250A
18
CDT18G2/CPD18OO2
PVDB18-250-5-50-IG
PVDB18-250-5-50-OO
120kW
20kW
6
32A
160A
250A
24
CDT24G2/CPD24OO2
PVDB24-160-6-32-IG
PVDB24-160-6-32-OO
150kW
25kW
6
40A
250A
250A
24
CDT24G2/CPD24OO2
PVDB24-250-6-40-IG
PVDB24-250-6-40-OO
180kW
30kW
6
50A
250A
250A
24
CDT24G2/CPD24OO2
PVDB24-250-6-50-IG
PVDB24-250-6-50-OO
140kW
20kW
7
32A
250A
250A
24
CDT24G2/CPD24OO2
PVDB24-250-7-32-IG
PVDB24-250-7-32-OO
175kW
25kW
7
40A
250A
250A
24
CDT24G2/CPD24OO2
PVDB24-250-7-40-IG
PVDB24-250-7-40-OO
210kW
30kW
7
50A
250A
250A
24
CDT24G2/CPD24OO2
PVDB24-250-7-50-IG
PVDB24-250-7-50-OO
Indoor
PV Distribution board
Main switchboard
PV Distribution board
20]
For further information please contact Sales: 1300 NHP NHP or visit nhp.com.au
Surge protection
Surge protection of solar power systems
Transient overvoltage
Transient overvoltages are surges that can reach tens of kilovolts with duration of the order of microseconds.
Despite their short duration, the high energy content can cause serious problems to equipment connected to
the line, from premature aging to destruction, causing disruptions to service and financial loss.
The origin of surges can vary from external sources such as lightning and utility grid switching, to internal
sources such as the disconnection of motors or other inductive loads. Outdoor and longer lines are the most
exposed to these fields, which often receive high levels of induction.
Transient overvoltages do not occur solely in power distribution lines, but are also common in any line formed
by metal conductors, such as telephony, communications, measurement and data.
In all these networks, transient overvoltage protection is achieved by installing the protector or line discharger
on the vulnerable line, connecting it in parallel with the load (eg. solar array or inverter) between the line and
earth. This means that in the event of a transient over-voltage, the protector will discharge excess energy to
earth, thus limiting the peak voltage to a value acceptable for the electrical equipment connected.
General operation of a protector
A transient overvoltage protection device acts as a voltage controlled switch and is installed between the active
conductors and ground in parallel with the equipment to be protected. When the supply voltage is lower than
its activation voltage, the protector acts as a high-impedance element so that no current flows through it. When
the supply voltage is higher than the activation voltage, the protector acts as an element with an impedance
close to zero, diverting the overvoltage to earth and preventing it from affecting equipment downstream.
The nominal voltage of the electrical supply must be considered when selecting a SPD. Since the SPD acts a
voltage controlled switch, the nominal voltage of the network must not exceed the maximum continuous
operating voltage (MCOV) of the SPD. If the SPD is connected to a network where the nominal voltage is greater
than the MCOV rating of the SPD, the SPD will reach end of life prematurely.
Another point to consider when selecting a SPD, is the voltage protection level, which must be less than the
maximum voltage which can be withstood by the equipment to be protected.
Depending upon the exposure of the installation to the effects of lightning and transient overvoltages,
protection devices with different discharge capacities will be needed. The various local and international
standards classify devices into types or categories based on their discharge capacity and voltage protection
level.
In installations where the average number of lighting events are high or where there is high risk then a Type 1
device should be used. Type 1 devices can be identified by their Iimpulse rating which is a simulated lightning test.
Where the risk of lightning is low or the installation is deemed as being low risk or non-critical then a Type 2
device should offer sufficient protection.
Ii
n device
Installing a surge protection device
LOAD
SUPPLY
LOAD
LOAD
Up
Ue
PROTECTOR
TOR
Ii discharge current
Up < Ue
Up residual voltage of the protection device
voltage
surge
the
equipment
is
capable
of
withstanding
Ue
For further information please contact Sales: 1300 NHP NHP or visit nhp.com.au
21]
Surge Protection PV
Cirprotec Solar PV-rated Surge Protection
Cirprotec surge protection products to suit solar applications, manufactured in Spain
• Modular and pluggable - easy fit within combiner boxes
• Complies with standards – meets EN61643-11 and IEC61643-1
• Domestic or Commercial SPDs - suits 600 V DC or 1000 V DC systems
•
Photovoltaic installations are highly exposed to atmospheric phenomena resulting in power surges and induced over-voltages,
it is therefore very important that both the DC and AC electrical lines in photovoltaic systems be protected with appropriate
surge protection devices. Do not rely on internal Type 3 surge protection featured in some inverters.
CPT-PSC3-12-1000IR
PSC range consists of class 1 and 2 surge protection devices ideal for protection of service entrance and distribution panels in
areas exposed to lightning activity.
PSM range consists of class 2 surge protection devices ideal for protection of distribution and branch panels, electronic
equipment, etc.
PSC Range
Type 1 + 2 Overvoltage Protectors
CAT. NO.
Iimp L-L
(kA)
Imax
(kA)
In
(kA)
#Poles
Ucpv
(V DC)
Up@In L-L
(<kV)
CPT-PSC3-12-1000IR
12.5
65
20
L+ L- E
1170
3.6
CPT-PSC3-12-600IR
12.5
65
20
L+ L- E
700
2..6
PSM Range
Type 2 Overvoltage Protectors
CAT. NO.
Imax
(kA)
In
(kA)
#Poles
Ucpv
(V DC)
Up@In L-L
(<kV)
CPT-PSM3-40/1000IR
40
20
L+ L- E
1060
4
CPT-PSM3-40/600IR
40
20
L+ L- E
660
2.6
AC Protection - PSC Pluggable
CAT. NO.
CPT-PSM3-40/1000IR
Iimp(kA)
Phases
Poles
Imax (kA)
In (kA)
Uc (V DC)
Up (kV DC)
CPTPSC212230IR
12.5
1
2
65
20
275
< 1.3
CPTPSC412400IR
12.5
3
4
65
20
440
< 1.3
In (kA)
Uc (V DC)
AC Protection - PSM Pluggable
CAT. NO.
22]
Iimp(kA)
Phases
Poles
Imax (kA)
Up (kV DC)
CPTPSM220230IR
-
1
2
20
10
320
< 1.4
CPTPSM240230IR
-
1
2
40
20
275
< 1.3
CPTPSM420400IR
-
3
4
20
10
320
< 1.4
CPTPSM440400IR
-
3
4
40
20
275
< 1.3
For further information please contact Sales: 1300 NHP NHP or visit nhp.com.au
Surge Protection PV
DF Electric PV Rated Fuselinks and Holders
DF Electric’s PV rated fuselinks and fuse holders for solar applications are manufactured in Europe.
• Ultra-rapid gPV - rated PV1-F complies with ASNZ5033:2014
• 10 x 38 size up to 30 A - larger frame sizes and ratings available
gPV 10x38 Fuse Links
CAT. NO.
In
(A)
Isc
(kA)
Fuse Size
Udc
(V DC)
PVFUSE02
2
30
10 x 38 mm
1000
PVFUSE03
3
30
10 x 38 mm
1000
PVFUSE04
4
30
10 x 38 mm
1000
PVFUSE06
6
30
10 x 38 mm
1000
PVFUSE08
8
30
10 x 38 mm
1000
PVFUSE10
10
30
10 x 38 mm
1000
PVFUSE12
12
30
10 x 38 mm
1000
PVFUSE16
16
30
10 x 38 mm
1000
PVFUSE20
20
30
10 x 38 mm
1000
PVFUSE02
PMF 1000V DC Fuse Holders
CAT. NO.
#DIN Mods
#Poles
In
(A)
Fuse Size
Udc
(V DC)
PVFUSEHLDR2P
2
2
32
10 x 38mm
1000
PVFUSEHLDR2P
For further information please contact Sales: 1300 NHP NHP or visit nhp.com.au
23]
Solar DC Isolators
Socomec DC Solar Isolators
Socomec provide an extensive range of industrial quality DC solar isolators manufactured in Europe.
• 1000 V DC ratings - suitable non-domestic applications
• Half switch ratings - complies with ASNZ5033:2014 Appendix B5 requirements
• Choice of options - range of handles and mountings to suit all applications
• Half switch ratings from 25 A to 500 A - covers all transformerless inverter applications
• European manufacture - guaranteed quality and durability
Sirco MC PV IEC 60947-3
Switch Body
CAT. NO.
#Poles
½Switch 600 V
(A)
½Switch 1000 V
(A)
In
(A)
H
(mm)
W
(mm)
21PV 5102
4
30
10
40
78
73.5
21PV 6722
6
40
25
40
78
89
21PV 5102
Direct Operating Handle to suit 21PV6722
CAT. NO.
Description
2119 1412
DIRECT HANDLE SOC BLUE MC01
2119 1412
External Operating Handle Sirco MC
CAT. NO.
Description
2119 3312
HANDLE BLACK EXT OP FOR SIRCO MC PV
2107 0516
SHAFT HANDLE 165 MM FOR SIRCO MC PV
Accessories
CAT. NO.
Description
2914 3004
TERMINAL SHROUD TOP AND BOTTOM 3P FOR SIRCO MC
2194 3004
24]
For further information please contact Sales: 1300 NHP NHP or visit nhp.com.au
Sirco PV IEC 60947-3
Switch Body
CAT. NO.
#Poles
In
(A)
½Switch 100V
(A)
H
(mm)
W
(mm)
Frame
26PV 2010
2
100
50
160
180
B4
26PV 2016
2
160
50
160
180
B4
2
SIRCO PV IEC 60947-3
250
50
160
180
B4
from2031
100 to 2000 A - up to21500 VDC
26PV
315
50
160
180
B4
27PV 2039
500
100
260
230
B5
125
NA
108
210
B4
170Ø 11
270
B5
170
270
B5
26PV 2025
Load break switches for photovoltaic applications
27PV 2039
2
Frame B4-B5
26PV 4012
4
J
4
26PV 4080
4
Y
Ø7
Frame B6
25
630
NA
800
NA
J1
Accessories
B
K
K2
K1
H
30
26PV 4063
B4
Ø9
7.5
J1
1
13.3
Dimensions (mm)
B5
Ø 13
50
20
Description
sirco-pv_068_a_1_x_cat
CAT. NO.
H
45
EXTERNAL HANDLE BLACK S2 IP55
C
J2
Ø9
sirco-pv_070_a_1_x_cat
142F 2111
J3
1. Doesn’t concern 400 and 500 A.
A
2699 5052
Frame
DIRECT HANDLE BLACK TO SUIT 26 PV AND 27PV
No. of pole
B4
2P
B5
3P
B5
4P
1433
B5 3111
B
C
H
H1 max.
J
J1
180
230
290
J2
J3
K
160
95
132.5
107
160
260
126.5
203
166
210
260
126.5
203
166
270
K1
55
-
100
135
67.5
80
53
75
65
-
195
67.5
80
51.5
135
65
-
195
67.5
80
51.5
HANDLE
EXTERNAL
S3
IP65 BLACK
TO
230
260
128 MOUNT
203
166TYPE210
75
- SUIT
13027PV2039
195
2P
2698 3050
A
SLB315-630 3P SCREEN 1 OFF TO SUIT 27PV2039
1400 1020
Frame B4DS-B5DS
48
K2
Y
80
38.5
80
Frame
B6
SHAFT 200 MM 10 X 10 MM S2 HDL
Frame B6DS
Ø9
7.5
B4DS
Ø7
25
C
Y1
Ø 11
13.3
J
Y
K1
B
45
20
Ø 13
J2
Frame
B5DS
B5
14
B4
B5
H1
J3
A
B4DS
Frame
B4
sirco-upv_071_a_1_x_cat
sirco-pv_069_a_1_x_cat
50
H
K
B5DS
K
B
K1
H
30
J1
B5DS
No. of
poles
A
2P
180
160
95
132.5
107
160
55
-
100
135
48
80
38.5
2P
230
260
128
203
166
210
75
-
130
195
67.5
80
53
No. of pole
4P
B
6P
8P
A
B
244C
160
301
260
361
260
General Catalogue 2013-2014
C
H162
H
H1
129
H1
176
238.5
max.165.5
203
238.5
203
165.5
H1 max.
J
J
160
J1
J1
107
166
210
35
166
270
35
35
J2
J2
J3
K
-
100
J3
135
65
-
195
-
195
65
K
K1
Y
Y1
67.5
38.5
K1
68.5
51.5
132.5K2
189
68.5
51.5
189
Y
Frame
4P
244
160
162
129
176
160
35
-
100
135
67.5
-
38.5
4P
290
260
126.5
203
166
210
135
65
-
195
67.5
80
51..5
For further information please contact Sales: 1300 NHP NHP or visit nhp.com.au
B6ds
25]
Solar DC Isolators
Benedict DC Solar Isolators
Benedict provide 1000 V DC PV isolators manufactured in Europe.
• 1000 V rating per pole - Complies with ASNZ5033:2014 and CEC requirements
• Wide voltage ratings - Available at intermediate voltages to suit specifications
• Half switch ratings - Complies with ASNZ5033:2014 Appendix B5 requirements
• Din-mount - Suits commercial and custom applications
CAT. NO.
#Poles
½Switch 600 V
(A)
½Switch 1000 V
(A)
In
(A)
H
(mm)
W
(mm)
LS25SMAH1A4P2L
8
25
25
45
96
120
LS32SMAH1A4OL
4
32
13
32
96
60
LS32SMAH1A4P2L
8
32
32
58
96
120
LS32SMAH1A4OL
Dimensions:
Dimensions
LS.. SMAH1.. with low height handle
4P +SV1N, A4.+SV1N
A2+2
8P +SV1N, A6+SV1N, A8+SV1N
A4+2
..
LS16 PFL
PFL..,
.., LS25 PFL
PFL..,
.., LS32 PFL
PFL..
..A2, ..A2+2, ..A4.
..,
LS16 PF
PF..,
.., LS25 PF
PF..,
.., LS32 PF
PF..,
..A6, ..A8, ..A3+2, ..A4+2
Main-Switch (lockable)
LS..PFLH4 A
A..
..
Main-Switch (lockable)
..
LS..PFH4 A
A..
LS32SMAH1A4P2L
26]
For further information please contact Sales: 1300 NHP NHP or visit nhp.com.au
Solar DC Isolators
Katko DC Solar Isolators
Katko aluminium enclosed solar isolators are suitable for wall or roof mounting offering a robust solution for Solar panel isolation.
PRODUCT DATA
With ratings up to 32 A and 1000 V DC they are fully tested to the IEC standards and comply with AS/NZS5033:14.
17.4.2013
• Rated to 85°C - suitable for wall or exposed roof mounting
• Aluminium enclosure - strong and durable construction
• 2 pole and 4 pole rating at 1000 V - use on dual or single string applications up to 1000 V, 25 A @ 85°C
Product name
PV ARRAY DC ISOLATOR
• IP66 - mounting in all directions and totally weatherproof
Type
KDA 432
EAN
• External and internal earthing point - easy to install and earth
Switch-disconnector KD 432
• UV and chemical resistant - long life expectancy even in exposed positions
Enclosure
A2, aluminium, grey
Handle
LK10, black
• Threaded bottom entries 25 mm - quick termination of conduits plus additional knockouts
Aluminum Enclosed PV Isolator
Label
CAT. NO.
#Poles
H
(mm)
W
(mm)
Technical information
OpTempMax
IP Code
(°C)
Ui
PVA432
4
157
102.5
85Ithe
Uimp
Derating curve
IP66
1200VDC
8kV
32A
DC-21B
600VDC
1000VDC
1POLE
16A
4A
2POLE
32A
16A
4POLE
32A
32A
Standard
IEC/EN 60947-3
RoHS
PVA 432 - Aluminium enclosed
VDE 0660
AS/NZS 5033:2012
%
2 x M25 (BOTTOM)
no plugs included
2 x Ø25 KNOCK-OUTS (TOP)
4 x Ø20 KNOCK-OUTS (REAR)
100
PVA432
PV ARRAY DC ISOLATOR
95
90
85
80
75
70
65
60
55
50
3540 4550 5560 6570 758085
www.katko.fi
Data subject to change without notice
Ambient temperature °C
Rating @ 600 V DC
Rating @ 800 V DC
Rating @ 1000 V DC
60 °C
85°C
60°C
85°C
60 °C
85°C
4 pole
32 A
25 A
32 A
25 A
32 A
25 A
2 pole
32 A
25 A
25 A
25 A
25 A
25 A
1 pole
16 A
16 A
8A
8A
4A
4A
Enclosure Type
CAT. NO.
A2, aluminium, grey
PVA432
IP rating needs to be maintained upon installation.
*
For further information please contact Sales: 1300 NHP NHP or visit nhp.com.au
27]
Grid Protection
Woodward Protection Relays
Woodward manufacture grid protection relays for solar applications in both anti-islanding and export control format.
Woodward relays are installed in all Australian states and listed as approved in so far as distribution network companies maintain
such listings. Essentially categorised as G59 mains protection relays for Embedded Generators, these relays provide redundant
protection maintaining operation in synchronisation with the mains utility grid.
Note: for Western Australia, ANSI code 59N is required. This neutral displacement feature is provided only on the HighProtec
MRU4 and MRA4 range.
• Configuration software - allowing set-up to meet specific local utility requirements
• References in all states - easier connection approvals
• Full range of capability - one relay brand can meet the large variety of solar PV protection needs
Woodward Grid Protection Relays
Woodward grid protection relays provide backup anti-islanding capability required by some utilities in order to obtain grid
connection approval. This is particularly so at solar system sizes greater than 30 kW.
Monitoring of network mains for voltage and frequency, calculating parameters such as ROCOF, phase shift and reactive power
then initiating a de-coupling action are the relays’ essential functions, and are based on a voltage connection only.
Configuration software featuring visualisation is included. Communications options are available.
MRU4
MRU4 Series
CAT. NO.
Description
MRU4 – Voltage/
Frequency
protection
RELAY MRUV
WOODWARD G59 59N
LOSS OF MAINS NO COMMS
MRU4 A
MRU4 B
MRU4 C
 Voltage based protection function
RELAY
MRUV WOODWARD
G59 59N LOSSfunctions
OF MAINS MODBUS RTU
 Elaborate
Frequency
protection
 Combination
of mains decoupling, load shedding
RELAY MRUV WOODWARD G59 59N LOSS OF MAINS MODBUS TCP
vector surge and frequency gradient protection
 ROCOF and Phase shift based on actual measurement
© PM Control
28]
For further information please contact Sales: 1300 NHP NHP or visit nhp.com.au
MRU4
Presentation Title | 15
Yprotec-1000 Series
otec-1410
e Version 1.03xx
Manual Multifunction Relay
Woodward Protection Relays
Easyprotec
CAT. NO.
Description
EASYPROTEC 1410 7 24
RELAY EASYPROTEC WOODWARD G59 LOSS OF MAINS 24 V
ANSI Code
Definition
easyProtect MFR300 MRU4
MRA4
25
Synchronisation Check
27
Undervoltage
32
Directional Power
37
Undercurrent
46
Phase Balance/Reverse Phase
47
Phase Balance Voltage
49
Thermal Overload
X
50BF
Circuit Breaker Failure
X
50N
Neutral Instantaneous Overcurrent
X
50P
Phase Instantaneous Overcurrent
X
51N
Neutral Time Overcurrent
X
51P
Phase Time Overcurrent
X
51Q
Negative Phase Overcurrent
X
51V
Voltage Restrained Time Overcurrent
X
55
Power Factor
59
X
X
X
X
X
X
X
X
X
X
X
X
Overvoltage
X
X
59N
Neutral Overvoltage
X
62BF
Time Delay Breaker Failure
X
67N
Neutral Directional Overcurrent
X
67P
Phase Directional Overcurrent
74TC
Trip Circuit Supervision
78
Phase Angle Measure
79
Auto Reclose
X
X
X
X
81O
Over Frequency
X
X
X
X
81R
Rate of Change of Frequency (ROCOF)
X
X
X
X
X
X
X
X
Under Frequency
X
X
X
X
81U
X
X
X
X
X
X
X
X
X
For further information please contact Sales: 1300 NHP NHP or visit nhp.com.au
29]
Woodward Export Control Relays
Woodward export control relays operate by sensing reverse power flow. Featuring both a voltage and current measurement
connection enables these relays to provide significantly more functionality than basic backup anti-islanding capability required
by some utilities.
The MFR300 relay requires a 12/24 V DC power supply and is best suited to control contactors to open inverter connection(s).
The HighProtec HRA4 range offers control and logic functionality, incoming and outgoing feeder protection and includes
parameterizing and analysing software Smart view SE. This range will accept a wide range power supply and is best suited
for full modulation control of inverter(s) via data communication, but includes other modes of control too.
MFR300 Series
CAT. NO.
Description
MFR300
RELAY MFR300 75M WOODWARD G59 ZERO EXPORT
MFR300
Relay Communication Interfaces
The DPC Programming cable is a USB-UART Converter used to connect a Woodward protection relay to a PC/laptop for
configuration and monitoring purposes.
This cable is required for Woodward’s EASYPROTEC1410724 and MFR300 relays but not required for the either HighProtec
MRU4 or MRA4 range.
30]
CAT. NO.
CommPorts
Compatible
ConfigSW
5417 1251
RJ45, USB MASTER (SQUARE)
MFR300, MFR11
SMART VIEW SE
For further information please contact Sales: 1300 NHP NHP or visit nhp.com.au
MRA4 Series
CAT. NO.
Description
MRA4 AA
RELAY MRA4 WOODWARD G59 EXPORT LIMITING NO COMMS
MRA4/MCA4
MRA4 AB
RELAY MRA4 WOODWARD G59 EXPORT LIMITING MODBUS RTU
Directional
Feeder
protection
MRA4 WOODWARD
G59 EXPORT LIMITING
MODBUS TPCbased
CombinedRELAY
voltage
and current
protection
MRA4 AC
CanCan
bebeused
sequential
Solar
Inverter
export)
used forfor
sequential
Solar Inverter
Switching
control Switching
(zero export) forcontrol
maximum (zero
12 individual
inverters
for maximum12 individual inverters.
MRA4/MCA4
© PM Control
•
Front design
– Grafic display 128x64
– 14 LED´s free settable
– 1 System OK LED
– Interface for Smart view
© PM Control
Presentation Title | 17
• Rear side
 All terminals removable
 Terminal Kits for pre wiring available
Presentation Title | 19
For further information please contact Sales: 1300 NHP NHP or visit nhp.com.au
31]
For more information, scan to
download the NHP eCatalogues App
offering exclusive video content,
catalogues and literature!
AUSTRALIA
nhp.com.au
SALES 1300 NHP NHP
sales@nhp.com.au
VICTORIA
Melbourne
43-67 River Street
Richmond
VIC 3121
Tel +61 3 9429 2999
Laverton
104-106
William Angliss Drive
Laverton North
VIC 3026
Tel +61 3 9368 2901
Dandenong
Unit 1/80 Monash Drive
Dandenong South
VIC 3175
Tel +61 3 8773 6400
Fax 1300 647 329
TASMANIA
Hobart
29B Lampton Ave
Derwent Park
TAS 7009
Tel +61 3 6228 9575
Fax +61 3 6228 9757
Launceston
Unit 3
13-17 Merino Street
Kings Meadows
TAS 7249
Tel +61 3 6345 2600
Fax +61 3 6344 6324
SOUTH AUSTRALIA
NEW SOUTH WALES
NORTHERN TERRITORY
Sydney
30-34 Day Street North
Silverwater
NSW 2128
Tel +61 2 9748 3444
Darwin
3 Steele Street
Winnellie
NT 0820
Tel +61 8 8947 2666
Fax +61 8 8947 2049
Newcastle
575 Maitland Road
Mayfield West
NSW 2304
Tel +61 2 4960 2220
Fax +61 2 4960 2203
Wollongong
Unit 3
1 Resolution Drive
Unanderra
NSW 2526
Tel 1300 647 647
Fax 1300 647 329
Albury / Wodonga
847 Ramsden Drive
Albury
NSW 2640
Tel +61 2 6049 0600
Fax +61 3 6025 0592
ACT
Canberra
Unit 1
187 Gladstone Street
Fyshwick
ACT 2609
Tel +61 2 6280 9888
Fax +61 2 6280 9588
WESTERN AUSTRALIA
Perth
38 Belmont Ave
Rivervale
WA 6103
Tel +61 8 9277 1777
Adelaide
36-38 Croydon Road
Keswick
SA 5035
Tel +61 8 8297 9055
NHP Electrical Engineering Products Pty Ltd
A.B.N. 84 004 304 812
NRENEWEC 06/15 © Copyright NHP 2015
QUEENSLAND
Brisbane
16 Riverview Place
Murarrie
QLD 4172
Tel +61 7 3909 4999
NEW ZEALAND
nhp-nz.com
SALES 0800 NHP NHP
sales@nhp-nz.com
PO Box 62-009
Sylvia Park
Auckland 1644
New Zealand
Auckland
118a Carbine Road
Mt Wellington 1060
Townsville
5 Leyland Street
Garbutt
QLD 4814
Tel +61 7 4779 0700
Fax +61 7 4775 1457
Hamilton
78 Rostrevor Street
Hamilton 3204
Rockhampton
1 Lawson Street
Parkhurst
QLD 4702
Tel +61 7 4927 2277
Fax +61 7 4922 2947
New Plymouth
2 Dean Place
Waiwhakaiho 4312
Toowoomba
Cnr Carroll Street and
Struan Court
QLD 4350
Tel +61 7 4634 4799
Fax +61 7 4633 1796
Cairns
Unit 2
1 Bramp Close
Portsmith
QLD 4870
Tel +61 7 4035 6888
Fax +61 7 4035 6999
Napier
126 Taradale Road
Onekawa 4110
Wellington
Unit B4, 59 Marsden Street
Melling
Lower Hutt 5010
Christchurch
27 Iversen Terrace
Waltham 8011
Dunedin
30 Fox Street
South Dunedin 9012