1 A RCHI TECTURA L DOW N L I GH TS “ The lighting specifier’s dream, Architektūr exemplifies the practicality of lighting control, and the freedom of creativity in one superb product. ” C O N T E N T S 2 Architektūr Introduction 4 Virtual Source 6 Reflector Finishes 8 New Features 10 LED 12 Compact Fluorescent 16 High Intensity Discharge 18 Incandescent 20 Signos 22 Signos 6" 24 Signos 8" 26 Lamp Source Technology 1 T E C H N O L O G Y M E E T S A R T I S T R Y 2 Architektūr is the merging of the practical and the idealistic. It is the marriage of technology and art. Architektūr offers a complete line of specification-grade luminaires in the latest technologies including LED light sources, and advanced optics and reflectors with choices of specularity, color, and finish. The lighting specifier’s dream, Architektūr exemplifies the practicality of lighting control, and the freedom of creativity in one superb product. Potawatami Bingo Casino, Milwaukee, WI ©2008 Lambros Photography 3 www.prescolite.com V I R T U A L S O U R C E ® Prescolite’s Virtual Source® optics for Architektūr downlights have fundamentally changed the way optical performance is measured and observed. Virtual Source represents a unique, proven approach to reflector technology as it is the first studied application of ergonomic design in downlighting. 4 Virtual Source® reflectors exhibit unique lamp image flow. The passive lower reflector always fills logically and smoothly with light, at a rate constant to the viewer’s movements. The result is quiet, unobtrusive downlighting by design. Prescolite Virtual Source® Competitor X Competitor Y Competitor Z O P T I C A L T E C H N O L O G Y NON-PRESCOLITE OPTICAL DESIGN MEANS VISUAL NOISE Traditional Optical Design (Non-Prescolite) T4 compact fluorescent lamps are tubular and therefore not symmetrical in the horizontal position. They have different relative physical cutoff (and thereby optical cutoff) between 0° and 90°. Consequently, horizontally mounted compact fluorescent lamps in a non-Virtual Source® reflector result in “visual noise” that lighting designers find objectionable (see fig. 1 on opposite page). Prescolite’s Virtual Source Optical Design U.S. Patent No. 5,918,969 Prescolite’s optical designer deviated from the standard design and engineered a “transition line” that separates the upper and lower portions of the reflector (see fig. 2 on opposite page). As a result, the cut-off is derived from the transition line, not the lamp(s). The active upper reflector section is called the Virtual Source, or “glowy top.” The effect emulates a round glowing shape, similar to an R-lamp. The lower section is intentionally designed to be inactive until the viewer is able to distinguish the active top section as a distinct optical element. (Continued) FIG. 3 FIG. 1 ® > THE VIRTUAL SOURCE CONCEPT NON-PRESCOLITE® OPTICAL DESIGN =VISUAL NOISE The promise: Parallel cutoff (between the optical and physical cutoff) The Result: Symmetrical Cutoff ® Virtual Source downlights will have the same cutoff angle in all lateral planes because the transition line in the reflector defines the cutoff angle. Symmetrical cutoff will yield downlights with the same appearance regardless of how the viewer approaches the downlight, whether the lamp is vertically or horizontally mounted. R1 R2 The reason it is impossible: The horizontally mounted compact fluorescent lamp is asymmetrical. When the optical cutoff reflects light out of the reflector at angles higher than the physical cutoff, side angle glare is created. Typical downlights derive a significant amount of their efficiency above the 40º zone, resulting in direct glare. Prescolite’s Virtual Source optics deliver most of their light in the 0º-40º zone, which results in more task illumination where you need it and downlights that are both efficient and effective (see fig. 3). Zonal Lumens and Percentages ZONE LUMENS 0° - 30° 0° - 40° 0° - 60° 0° - 90° 40° - 90° 60° - 90° 90° - 180° 0° - 180° 1628 2548 3551 3555 1007 4 0 3555 % LAMP % LUMINAIRE 33.93 53.09 73.98 74.08 20.99 0.09 0.00 74.08 45.81 71.66 99.87 100.00 28.34 0.13 0.00 100.00 Efficiency = 74.1% S/MH = 1.2 SC (Along) = 1.4, SC (Across) = 1.2 5 PRESCOLITE’S VIRTUAL SOURCE ® TWO-LAMP TRIPLE TUBE DOWNLIGHT R 2-0 R 2-90 R 1-90 Zonal Lumens and Percentages R 1-0 Efficiency TYPICAL TWO-LAMP TRIPLE TUBE DOWNLIGHT The typical result: So-called “bunny’s teeth,” odd striations, or bright spots are visible on the side of the reflector. An active lower reflector (intentional or not) has uneven brightness that is apparent to the viewer. ZONE LUMENS 0° - 30° 0° - 40° 0° - 60° 0° - 90° 40° - 90° 60° - 90° 90° - 180° 0° - 180° 2055 3199 3568 3568 368 0 0 3568 % LAMP % LUMINAIRE 42.81 66.66 74.33 74.33 7.67 0.00 0.00 74.33 57.60 89.86 100.00 100.00 10.32 0.00 0.00 100.00 ® Efficiency = 74.3% S/MH = 1.2 SC (Along) = 1.4, SC (Across) = 1.2 R1-90 R 2-90 FIG. 2 PRESCOLITE® VIRTUAL SOURCE® OPTICAL DESIGN “Glowy” Top (Upper Reflector) Active Upper Reflector Transition Line Passive Lower Reflector There is no physical cutoff in the design. R1-0 R2-0 0° Lateral Angle R1-90 R2-90 90° Lateral Angle www.prescolite.com 6 R E F L E C T O R F I N I S H E S Diffuse Finishes Diffus Semi-Spe Semi-Specular or diffuse finishes are created by immersing reflectors in sodium hydroxide, w which attacks the aluminum and disrupts the reflective surface. The surface then scatter scatters light, creating a semi-specular or diffused a appearance. Reflector Fin Finishes 7 1 Specular Specular Clear Alzak is the industry standard finish. 2 Semi-Specular Semi-Specular exhibits a slightly diffused visual appearance in the ceiling plane compared with Specular Alzak. 3 American Matte American Matte™ has a textured surface which hides finger prints. 1 Clear 2 Black 3 Pewter 4 Champagne Gold 5 Wheat 6 Light Wheat Reflector Colors www.prescolite.com N E W F E A T U R E S DIE-CAST SOCKET CUP Prescolite has completely redesigned the socket cup – and it’s available now for Architektūr’s vertical series of compact fluorescent housings. 8 REGRESSED LENS Prescolite’s regressed lensed trims feature a deep regressed lens to provide greater visual comfort and match the appearance of open downlights. INTEGRAL TEST SWITCH Single push-button, pre-wired, multiple wattage downlight switch which glows red when charged. ADVANCE/LUTRON DIMMING OPTIONS A number of Advance and Lutron dimming options for specification and system flexibility are offered for Architektūr compact fluorescent fixture xtures. 9 MAXIMUM WATTAGE DOWNRATING Prescolite is committed to developing products that meet changing industry standards while educating lighting specifiers and engineers to assist them in meeting code requirements. That’s why Prescolite offers an option for Architektur and LiteFrame® CFL and INC products: wattage derating. Select fixtures can be specified with the wattage de-rating option, allowing power density calculations to be applied against lower fixture wattages. With this information, it’s easier to find fixtures that meet code requirements for a variety of projects. LED L E D T E C H N O L O G Y 1 LED LIGHT ENGINE The heart of LED lighting is the LED light engine, an integrated reflector array of LEDs designed around each LED to produce a uniform distribution. Patent pending. > 2 PARABOLIC LED REFLECTOR MODULES 10 The LED light engine features ten parabolic LED reflector modules. Each incorporates a patent pending application of Prescolite’s American Matte™ Finish to produce uniform illumination. 6 3 DIE CAST ALUMINUM HEAT SINK The LED light engine is mounted directly to a heavy aluminum heat sink, engineered to dissipate the heat generated by the LED array to ensure optimal life and lumen maintenance. 5 4 REFLECTOR 3 High purity spun aluminum reflector provides 45º cutoff for a glare-free ceiling appearance. 1 7 5 REFLECTOR VENTING Upper reflector is vented above the LED light engine for thermal management of the LED array. D6LED 6 LED DRIVER LED products feature Advance electronic drivers. 3 7 REFLECTOR RETENTION Reflector/LED light engine assembly is easily installed and retained by a single, tamper-resistant screw. Tool included. 1 2 4 8 WIRING QUICK-CONNECT The LED light engine is electrified via low voltage leads to the driver and a simple wiring quickconnect. SDPS6LED 2 4 11 3 LD6 1 6 2 3 4 LD4 8 5 6 3 4 D6LED 1 LED HEAT SINK Although LEDs generally operate cooler than conventional light sources, the heat they produce can dramatically affect their life if not properly vented. Prescolite® LED lighting fixtures feature highly engineered die cast aluminum heat sinks mounted directly to the top of the LED light engines to efficiently dissipate heat. This assures the 50,000* hour life of the LED is achieved. * At 70% of rated light output. CFL C O M P A C T F L U O R E S C E N T L I G H T I N G > 12 Compact fluorescent downlights are an excellent choice when specifying. Offering low maintenance and operating costs, they are complementary in hospitality, health care, food service, office, and other commercial spaces. With a broad lens and finish offering which includes our Virtual Source® reflector technology for excellent brightness and glare control, our compact fluorescent line is an excellent choice for a vast array of commercial lighting applications. TM Presco Prescolite’s colite’s exclusive family of cross baf b baffle fle recessed downlights feature featur re patented Virtual Source® optics.. Virtual Baffle can be specified speciffie ied in 6” and 8” apertures with ttwo wo low profile housing designs desig igns for up to two 42W triple tube tub be lamps. C F T S E R I E S SUPERIOR THERMAL CONTROL Precision diecast aluminum heat sink ensures proper heat dissipation for consistent lamp operation and long life. MULTI-POSITION SOCKET CUP Patent pending, tool-less, multi-position socket cup allows precise optical control to maintain Virtual Source® optics. The new design improves rigidity and consistency in lamp positions while maintaining minimal plenum space height. Reflector label shows proper position for 26W, 32W, or 42W triple tube and 13W, 18W, or 26W quad tube lamps. INTEGRAL EM TEST SWITCH (OPTIONAL) Single push-button, pre-wired, multiple wattage downlight switch which glows red when charged. EXTRA-DEEP FLANGE 1-1⁄4” thick flange will accept two thicknesses of 5/8” wallboard. FLEXIBILITY Modular housing design accepts both downlight and companion wall wash reflectors. Optical systems can even be changed out after installation in minutes without tools. 6” and 8” modular housings are also compatible with Signos® architectural elements. SELF-TRIM REFLECTORS Forgiving 5/8” self-trim provides a clean overlap to ceiling cutouts with the tolerance contractors need and the appearance designers require. Optional white painted self-trim is also available. 13 CFL C O M P A C T F L U O R E S C E N T L I G H T I N G ( C O N T I N U E D ) LATEST LAMP AND BALLAST TECHNOLOGY 1 14 Prescolite’s Architektūr series of compact fluorescent housings combines the latest technologies including triple tube lamps and multi-watt, multi-volt electronic ballasts. This gives specifiers a built-in “safety net” during the design process. By designing around the 32W triple tube lamp, specifiers can adjust the final light output by simply switching the lamp to a lower or higher wattage. OPTIONAL FEATURES Optional features include bar hangers, mounting bars, sloped ceiling adapters, fusing, RFI filters, safety lenses, Chicago plenum, electronic dimming ballasts and emergency packs. Refer to specification sheets for details. SLOPED CEILING ADAPTERS Sloped ceiling adapters are stocked for 6” and 8” luminaires in 5° increments from 5° to 35° (dry ceiling only). Contact factory for more precise requirements. Adapter must be installed onto the housing prior to installation into the ceiling. > REGRESSED LENS TRIMS Prescolite’s regressed lensed trims feature a deep regressed lens to provide greater visual comfort and match the appearance of open downlights. C F T D S E R I E S INTEGRAL EM TEST SWITCH (OPTIONAL) Single push-button, pre-wired, multiple wattage downlight switch which glows red when charged. ELECTRONIC BALLASTS Electronic ballasts feature a multi-volt and multi-watt (triple tube only) design with end-of-life protection. Electronic ballasts save approximately 25% in energy use compared to magnetic ballasts. Electronic ballasts also provide rapid, flicker-free starting, low THD, and excellent current crest factor for long lamp life. ELECTRONIC DIMMING BALLASTS (OPTIONAL) Electronic analog dimming ballasts offer easy accessibility, and the same benefits as our standard electronic ballasts, including multi-volt and multi-watt capability, end-of-life protection, and smooth, flicker-free dimming down to 3%. ADJUSTABLE MOUNTING BRACKETS Adjustable mounting brackets provide up to 3” of vertical adjustment for quick installation. Mounting brackets accept a wide range of aftermarket hangers including 3/4” and 1-1/2” lathing channel, 1/2" EMT, or Prescolite® B6 or B24 bar hangers. EXTRA-DEEP FLANGE 1-1/4” thick flange will accept two thicknesses of 5/8” wallboard. VIRTUAL SOURCE® OPTICS Prescolite’s patented optical design provides symmetrical appearance (cutoff), symmetrical distribution, excellent performance, and an appearance that is unmatched in the industry. See pages 4-5 for more information. SELF-TRIM REFLECTORS Forgiving 5/8” self-trim provides a clean overlap to ceiling cutouts with the tolerance contractors need and the appearance designers require. Optional white painted self-trim is also available. 1 15 HID H I G H L I G H T I N G Architectural lighting designers are constantly challenged by two opposing design requirements: reducing operating costs to meet ever stricter government energy efficiency regulations, and at the same time, providing appropriate light levels in an architectural space. Couple this dilemma with the challenges of effectively lighting and maintaining difficult high ceiling applications such as theatres, atria, and airports, and the need for selecting the right luminaire solution becomes evident. To meet these intense interior design challenges, Prescolite offers the Architektūr series of HID downlight luminaires. Newer technology HID lamps, such as ceramic arc-tube metal halide provide long lamp life and remarkably high efficacy, all in a compact source for excellent optical control. Architektūr HID luminaires capitalize on this new technology, featuring multiple socket positions for medium or wide distribution, precision Virtual Source® reflector technology, modular plug-in ballasts, adjustable mounting brackets, and diecast aluminum heat sinks for superior thermal control. Prescolite also offers Architektūr luminaires for standard quartz arc-tube metal halide lamps or open fixtures for new internally shielded metal halide lamps. As a result of these new options and technologies, designers are using the advantages of new HID luminaires in applications that were never before possible. > 16 I N T E N S I T Y REGRESSED LENS TRIMS Prescolite’s regressed lensed trims feature a deep regressed lens to provide greater visual comfort and match the appearance of open downlights. OPTIONAL FEATURES Optional features include bar hangers, mounting bars, sloped ceiling adapters, fusing, RFI filters, safety lenses, Chicago plenum, electronic dimming ballasts and emergency packs. Refer to specification sheets for details. SLOPED CEILING ADAPTERS Sloped ceiling adapters are stocked for 6” and 8” luminaires in 5° increments from 5° to 35° (dry ceiling only). Contact factory for more precise requirements. Adapter must be installed onto the housing prior to installation into the ceiling. R H D E D 1 7 S E R I E S SUPERIOR THERMAL CONTROL Precision diecast aluminum heat sink ensures proper heat dissipation for consistent lamp operation and long life. MULTI-POSITION SOCKET CUP Multi-position socket cup allows precise optical control to maintain Virtual Source optics. Reflector label shows proper position for HID lamps. ADJUSTABLE MOUNTING BRACKETS Adjustable mounting brackets provide up to 3” of vertical adjustment for quick installation. Mounting brackets accept a wide range of aftermarket hangers including 3⁄4” and 1-1/2” lathing channel, 1/2" EMT, or Prescolite® B6 or B24 bar hangers. OPEN OR ENCLOSED LAMPS Prescolite offers both enclosed and open rated luminaires. Open rated luminaires include a protected socket to prevent the use of standard rated lamps. VIRTUAL SOURCE® OPTICS Prescolite’s patented optical design provides symmetrical appearance (cutoff), symmetrical distribution, excellent performance, and an appearance that is unmatched in the industry. See pages 4-5 for more information. SELF-TRIM REFLECTORS Forgiving 5/8” self-trim provides a clean overlap to ceiling cutouts with the tolerance contractors need and the appearance designers require. Optional white painted self-trim is also available. ELECTRONIC BALLASTS Most metal halide luminaires come standard with high power factor electronic ballasts that provide higher efficiency, better color and lumen maintenance, and cooler, quieter operation than magnetic ballasts. These ballasts are also small and lightweight which makes for easy replacement should it become necessary. 17 INC I N C A N D E S C E N T 18 L I G H T I N G Incandescent downlighting still remains the best choice for certain applications, particularly for spaces that require affordable accent illumination, comfortable ambient lighting, and excellent color rendering. In addition, incandescent downlights are much easier to dim than all other sources and offer greater convenience in terms of lamp availability and variety. Spaces which benefit from incandescent equipment include museums, churches, schools, auditoriums, and restaurants, as well as other commercial, retail, and corporate applications that require rugged, dependable, and effective luminaire performance. HIGH QUALITY CONSTRUCTION Prescolite products are constructed of high quality material including diecast aluminum, cold rolled steel, and high purity Alzak processed reflectors. ADJUSTABLE FEATURES Adjustable luminaires feature a mechanical locking mechanism to maintain the intended aim angle during relamping and routine maintenance. 358° H x 45° V adjustment. REGRESSED LENS TRIMS Prescolite’s regressed lensed trims feature a deep regressed lens to provide greater visual comfort and match the appearance of open downlights. OPTIONAL FEATURES Optional features include bar hangers, sloped ceiling adapters, safety lenses, fusing, DCB (auxiliary socket), Chicago plenum, and quartz restrike. Refer to specification sheets for details. > I N C 6 0 0 / I N C 8 0 0 S E R I E S SUPERIOR THERMAL CONTROL Precision diecast aluminum heat sink ensures proper heat dissipation for consistent lamp operation and long life. MULTI-POSITION SOCKET CUP Multi-position socket cup allows precise optical control to maintain Virtual Source optics®. Reflector label shows proper position for incandescent lamps. PRECISE OPTICAL ALIGNMENT Two-position socket allows for greater optical control and flexibility. ADJUSTABLE MOUNTING BRACKETS Adjustable mounting brackets provide up to 3” of vertical adjustment for quick installation. Mounting brackets accept a wide range of aftermarket hangers including 3/4” and 1-1/2” lathing channel, or 1/2" EMT, or Prescolite® B6 or B24 bar hangers. VIRTUAL SOURCE® OPTICS Prescolite’s patented optical design provides symmetrical appearance (cutoff), symmetrical distribution, excellent performance, and an appearance that is unmatched in the industry. See pages 4-5 for more information. SELF-TRIM REFLECTORS Forgiving 5/8” self-trim provides a clean overlap to ceiling cutouts with the tolerance contractors need and the appearance designers require. Optional white painted self-trim is also available. FLEXIBILITY Modular housing design accepts both downlight and companion wall wash reflectors. Optical systems can even be changed out after installation in minutes without tools. 6” and 8” modular housings are also compatible with Signos® architectural elements. 19 C U S T O M A R C H I T E C T U R A L Signos’ infinite design options offer lighting professionals unprecedented control and unbridled creativity in adding decorative lighting design signatures to architectural spaces. The modular Signos® system gives today’s professionals the ability to create seemingly limitless combinations without the usual “custom” price tag and lead time. 20 In addition, Prescolite can accommodate specific glass, acrylic, and special materials requests to meet the exacting aesthetic requirements of your environment. Modern, traditional, playful, or lowkey, Signos® custom architectural elements are genuine examples of infinite creativity. Prescolite’s Signos® custom architectural elements easily attach to Architektūr 6” or 8” modular frames for compact fluorescent, incandescent, and select HID luminaires, including those with premium Virtual Source® optical performance. For complete custom ordering and technical information, refer to Prescolite® Specification Sheets ARCH-SIG-001 through ARCH-SIG-008. Signos® elements afford the architectural designer the opportunity to specify a wide variety of color options and material combinations. Prescolite’s most popular Signos® architectural elements are just the beginning of the infinite combinations that can be created. Each Signos® element is made from premium materials and created painstakingly by hand. The imported glass elements are cast from custom molds and engineered and manufactured especially for E L E M E N T S Prescolite by experienced artisans and craftsmen. In the final steps of the process, each Signos® element is inspected for perfection and assembled with protective gloves to reveal a pristine, high quality, highly aesthetic finished product. Prescolite’s Signos® elements easily attach to Architektūr 6" or 8" modular frames for compact fluorescent, incandescent, and select HID luminaires, including those with premium Virtual Source® optical performance. Signos can be specified in a wide variety of standard finishes including aluminum, brass, bronze, copper, white, and black. Prescolite can also accommodate custom finish. GLASS ELEMENTS Signos’ imported custom glass elements are the mainstay of the offering. They can be stacked together, used with colored accent elements, or stand alone. LEVELS Signos® can be specified in one, two, or three levels. Either the short or long spacer can be used to create the desired look and height of the finished trim. COLOR Signos offers three standard colored accents, ruby red, cobalt blue, and emerald green. We can also accommodate a wide variety of additional colored accents to match your architectural environment. > 21 H u b b ell L i g h ti n g C or p ora te H ea d q u a r ters , G reen v i lle, S ou th C a roli n a © 2 0 0 8 B r i a n D re ss le r Pho to g rap hy C U S T O M 6 ” A R C H I T E C T U R A L R O U N D E L E M E N T S S I G N O S Signos® 6” decorative trims are designed to work in conjunction with 6” Prescolite® Architektūr modular downlight housings, including compact fluorescent, metal halide, and incandescent downlight series: CFQ6, CFT6, CFR6, CFT6H, CFTD8H, CFCB6, INC600, 79X, 79M2, and RHD601EB > Signos® trims are not compatible with regressed lens options > Signos® trims should be attached after the downlights have been installed and ceilings finished 22 > Special configurations possible. Contact technical support. > SR6030 & SQ6040 cannot be used with INC600 SR6010 SR6030 SR6045NF SR6070 SR6075 SR6080NF SR6100NF SR6105 SR6110NF SR6055NF SR6090 SR6115NF SR6060 SR6095 SR6120 6 ” S Q U A R E S I G N O S > Open design meets the requirement of ambient lighting without sacrificing illumination levels. > Glass elements and acrylic color accents can be mixed and matched to create thousands of unique combinations. > Retention mechanism allows relamping without removing trim from ceiling. > Sturdy mounting flange is constructed of aluminum in black, white, bronze, brass, or natural silver finish. > For use with Prescolite® 6” Architektūr modular downlights. > Signos is a fully customizable product line. Refer to specification sheets and/or contact your Prescolite® representative for more information. 23 ® Signos 6" square elements can also be specified with a round foundation flange. Refer to Specification Sheet ARCH-SIG-004 for details. SQ6005 SQ6010 SQR6015 SQ6020 SQ6030 SQ6035 SQ6040 SQ6050 SQ6070 SQ6075 SQ6080 SR6085 SQ6025 SQ6055 C U S T O M 8 ” A R C H I T E C T U R A L R O U N D E L E M E N T S S I G N O S Signos® 8 decorative trims are designed to work in conjunction with 8" Prescolite® Architektūr modular downlight housings, including compact fluorescent, metal halide, and incandescent downlight series: CFQ8, CFT8, CFR8, CFT8H, CFTD8H, CFCB8, INC800, RHD801. > Signos® trims are not compatible with regressed lens options > Signos® trims should be attached after the downlights have been installed and ceilings finished 24 > Special configurations possible. Contact technical support. SR1005 SR1010 SR1015 SR1020 SR1025 SR1030 SR1035 SR1040 SR1045 SR1055 SR1060 SR1065 SR1070 SR1085 SR1090 8 ” S Q U A R E S I G N O S > Open design meets the requirement of ambient lighting without sacrificing illumination levels. > Glass elements and acrylic color accents can be mixed and matched to create thousands of unique combinations. > Retention mechanism allows relamping without removing trim from ceiling. > Sturdy mounting flange is constructed of aluminum in black, white, bronze, brass, or natural silver finish. > For use with Prescolite® 8” Architektūr modular downlights. > Signos is a fully customizable product line. Refer to specification sheets and/or contact your Prescolite® representative for more information. 25 ® Signos 8" square elements can also be specified with a round foundation flange. SQ1005 SQ1025 SQ1050 SQ1010 SQ1030 SQ1055 SQ1075 SQ1070 SQ1015 SQ1035 SQ1060 SQ1080 SQ1020 SQ1045 SQ1065 SQ1085 L A M P 26 S O U R C E T E C H N O L O G Y Whether it is luminaires designed for new amalgam triple tube compact fluorescent, new ceramic arc metal halide, or halogen incandescent sources, Prescolite is always at the forefront of new product design. Prescolite works closely with all major lamp manufacturers during their new product development processes so that our new luminaires capitalize on these new sources and can be introduced simultaneously. Designers who choose Architektūr series products can rest assured that these luminaires have been rigorously designed, constructed, and optically engineered for each new lamp type. This results in controlled light output, maximized efficiency, and improved visual comfort. L E D Innovation is part of Prescolite’s heritage. Prescolite® LED lighting is a keynote example of this innovation, designed to bring the revolutionary benefits of cutting edge LED technology to your lighting projects. Rest assured, as LED lighting continues to improve, Prescolite will be integrating the latest LED improvements into our products. Some of the advantages of LED lighting include; higher light output per watt than incandescent lighting, self contained colors without the use of external filters, focused light without the use of external reflectors, consistent color temperature when dimming, more durable on/off cycling, being solid state it is less susceptible to external shock damage, very long life – 50,000 hours at 70% maintained lumen output, burnout is slow and not abrupt as in incandescent lamps, instant start up, small size. > C O M P A C T F L U O R E S C E N T QUAD TUBE CFL: Quad tube lamps are compact in size, deliver good lumen output, and they offer long life and excellent color rendition of 85+ CRI. 27 TRIPLE TUBE AND DOUBLE QUAD CFL: Triple tube and double quad CFL lamps provide high lumen output in an ultra compact size with excellent color rendition of 85+ CRI. The shorter length produces superior optical performance. Amalgam technology stabilizes lumen output in a wider range of operating temperatures. QUAD TRIPLE DOUBLE QUAD www.prescolite.com L A M P M E T A L S O U R C E H A L I D E T E C H N O L O G Y L A M P ( C O N T I N U E D ) T E C H N O L O G Y STANDARD METAL HALIDE: Standard metal halide lamps offer high efficacy with good color characteristics. • Efficacy: 75-85 LPW • Good CRI: 65-75 • Average color stability over life CERAMIC METAL HALIDE: Ceramic metal halide lamps provide superior performance compared to all other HID technologies. 28 T4 • Efficacy: 85-95 LPW T6 PAR20 CDMR111 PAR30L • Excellent CRI: 80-95 • Excellent color stability (+/- 150K initial, +/- 200K end of life) I N C A N D E S C E N T L A M P T E C H N O L O G Y A-LAMP: The classic “light bulb” provides a warm, economical source of light for ambient illumination. PAR LAMP TECHNOLOGY: PAR halogen lamps provide crisp white light, excellent beam control, and longer life compared to standard incandescent versions. PAR halogen lamps are available in a wide variety of sizes, PAR16, PAR20, and PAR38. In addition, they offer many wattages and beam patterns. PAR HIR (HALOGEN INFRARED) LAMP TECHNOLOGY: PAR HIR lamps utilize an infrared reflective coating that redirects a small portion of lost infrared heat back onto the filament to increase light output. Lamps with HIR technology are up to 30% more energy efficient than standard PAR lamps. A19 PAR16 PAR PAR20 R20 PAR38 H A L O G E N > L A M P T E C H N O L O G Y T4.MINI: The T4 Mini provides clean white light, easily dimmable with a standard slider, it also has a smaller filiment size which allows good optic control, and is available in high wattages and has longer life than standard incandescent lamps. STANDARD MR16: Standard MR16 lamps provide a cleaner, whiter illumination versus standard incandescent sources. Available in a wide variety of beam spreads and wattages, MR16’s provide a smooth, round beam for effective accent lighting. HIR MR16: HIR (halogen infrared) technology utilizes an infrared reflective coating that redirects a small portion of infrared heat back onto the filament to increase light output. Lamps with HIR technology are up to 30% more energy efficient than standard MR16’s. The 37 watt HIR lamp has comparable light output verses a standard 50 watt MR16. AR111: AR111 lamps are unique low voltage halogen light sources that produce an unparalleled beam of controlled light. The high precision aluminum reflectors contain a low-pressure halogen light source made with UV-stop quartz. AR111 lamps feature high center beam candlepower values, a smooth and even beam pattern, and a clean, sharp cutoff. PAR36: PAR36 lamps utilize halogen technology and a parabolic glass reflector design that results in increased center beam candlepower and a smooth, controlled beam pattern. www.prescolite.com 29 701 Millennium Boulevard Greenville, SC 29607 Phone: (864) 678-1000 www.prescolite.com Copyright © 2008 Prescolite, Inc., a division of Hubbell Lighting, Inc. All rights reserved. Printed in USA. PR1040a 07/08