GLXX-2DIM8
8 Channel Dimmer Module
The GLXX-2DIM8 is a Crestron Green Light Express® dimming module that
features eight channels of incandescent, magnetic low-voltage, 2-wire
fluorescent ballast, and LED dimming. It also offers four channels of
3-wire fluorescent ballast dimming. The module is part of a
complete Crestron® engineered GLPX Green Light Express dimming or
switching panel.
For more information on Crestron Green Light commercial lighting
products, please contact Crestron Sales Support Services.
> 8 channels of incandescent, MLV, ELV,[1] 2-wire
fluorescent, LED dimming
> 4 channels of 3-wire fluorescent ballast dimming
> Phase-Synchronous detection eliminates lamp flicker
> Selectable non-dim mode
> Supports 100 to 277 Volt applications
> 16 Amp load rating per channel
> Short circuit and overload protection
> Positive air gap at each output
> Phase-independent channels
> Cresnet® communications
> Redundant power capability—module powered via line
Cresnet
>
>
>
>
>
Minimum Load: 25 Watts
Connectors
or
Local controls for testing and verification
Local and remote override capability
Non-volatile power failure memory
GLEX cabinet installation
CEC Title 24 2013 Compliant
SPECIFICATIONS
Load Ratings
Dimmer Channels: 8
Per Channel: 16 Amps at 100-277 Volts AC, 50/60 Hz
Lighting Per Group: Channels 1-4: 16 Amps (1920 Watts);
Channels 5-8: 16 Amps (1920 Watts)
Motor Per Group: Channels 1-4: 1 hp at 120 Volts, 2 hp at 230/277 Volts;
Channels 5-8: 1 hp at 120 Volts, 2 hp at 230/277 Volts
Note: Do not mix motor and lighting loads in same group.
Dim Load Types: Incandescent, magnetic low-voltage, electronic low-voltage,[1]
neon/cold cathode, 2-wire fluorescent ballast, 3-wire fluorescent ballast (uses
adjacent channel for 3rd wire, i.e. channels 1 & 2 are to be used for one 3-wire
load), LED
Switch Load Types: Incandescent, magnetic low-voltage, electronic low-voltage,
neon/cold cathode, fluorescent ballast, high-intensity discharge, LED, motor
Power Requirements
Primary: 100-277 Volts AC, 50/60 Hz, supplied via Channel 1 (L1, N1)
Secondary (Optional): 5 Watts at 24 Volts DC, supplied via Cresnet®
www.crestron.com
800.237.2041
NET: (2) 4-pin 3.5 mm detachable terminal blocks, Cresnet port;
(2) 5-pin headers, connect to adjacent module or internal connecting block
using interconnect cable (block and cable provided)
OVR: (2) 2-pin 3.5 mm detachable terminal blocks, paralleled, comprising
(2) inputs for external contact closures to engage override mode
N1 - N2: (2) Terminal blocks, line input neutral
L1 - L2: (2) Terminal blocks, line power inputs
DM1 - DM8: (8) Terminal blocks, dim channel outputs
Note: Line power terminal blocks accept 10-26 AWG wire; Torque to 5.31
lb-in (0.6 Nm)
Controls & Indicators
NET ID: (2) 7-segment green LED digits and (2) miniature pushbuttons for
setting Cresnet ID
SETUP: (1) Red LED and (1) recessed miniature pushbutton for enabling
setup mode and touch-settable ID
OVR: (1) Red LED and (1) miniature pushbutton for enabling override mode
and saving override presets
PWR: (1) Green LED; Solid illumination indicates line power is applied to N1
and L1;
Flashing indicates Cresnet power is supplied in absence of line power
NET: (1) Yellow LED, indicates communication with control processor
RESET: (1) Recessed miniature pushbutton, resets internal processor
Channel Section:
1-8: (1) Red LED per each channel, indicates channel is at a non-zero level;
(8) Miniature pushbuttons for individual manual channel activation
DIM/3 WIRE FL/NON-DIM: (8) Recessed miniature switches for setting
channel mode;
When set to "3 WIRE FL" the adjacent channel will be used for the 3rd wire;
When set to "NON-DIM" module will ignore dim commands
GLXX-2DIM8
GLXX-2DIM888 Channel Dimmer Module
Enclosure
Surface mount module with (2) integral mounting flanges;
Mounts in a GLEX enclosure
Environmental
Temperature: 32° to 104° F (0° to 40° C)
Humidity: 10% to 90% RH (non-condensing)
Heat Dissipation: 154 BTU/hr
Dimensions
Height: 11.07 in (281 mm)
Width: 7.99 in (203 mm)
Depth: 3.50 in (89 mm)
Weight
5.20 lbs (2.36 kg)
Electrical Regulatory Certifications
UL508, Section 41 (Endurance Test) and Section 61C (Electronic Ballasts)
UL924, Emergency Power Equipment
IEC60669-2-1, Section 19.102 (Contact mechanisms incorporated in
electronic switches, intended for fluorescent lamp circuits or other
capacitive loads)
SCCR Rating - 65kA
CE
CEC Title 24 2013 Compliant
Notes:
1. Forward-phase or leading edge compatible transformers only.
Crestron products may be purchased from an authorized Crestron dealer. To
find a dealer, please contact the Crestron sales representative for your
area. A list of sales representatives is available online at www.crestron.
com/salesreps or by calling 800-237-2041.
The specific patents that cover Crestron products are listed online at:
patents.crestron.com
patents.crestron.com.
Certain Crestron products contain open source software. For specific
information, visit www.crestron.com/opensource
www.crestron.com/opensource.
Crestron, the Crestron Logo, Cresnet, and Green Light Express are either
trademarks or registered trademarks of Crestron Electronics, Inc. in the
United States and/or other countries. Other trademarks, registered
trademarks, and trade names may be used in this document to refer to either
the entities claiming the marks and names or their products. Crestron
disclaims any proprietary interest in the marks and names of others.
Crestron is not responsible for errors in typography or photography.
Specifications are subject to change without notice. ©2016
Crestron Electronics, Inc.
Crestron Electronics, Inc. 15 Volvo Drive | Rockleigh, NJ 07647
Tel: 800.237.2041 / 201.767.3400 | Fax: 201.767.1905
www.crestron.com
GLXX-2DIM8
GLXX-2DIM88 Channel Dimmer Module
Crestron Electronics, Inc. 15 Volvo Drive | Rockleigh, NJ 07647
Tel: 800.237.2041 / 201.767.3400 | Fax: 201.767.1905
www.crestron.com
All brand names, product names and trademarks are the property of their respective owners.
©2016 Crestron Electronics, Inc. | 15 Volvo Drive | Rockleigh, NJ 07647
Specifications subject to change without notice. 10/2/2016