From tillage to harvest and everything in between, Kuhn and Kuhn Krause have the
most complete line of specialized equipment for the full crop production cycle!
See Your Local Dealer
Retail Financing Is Available.
Ask Your Dealer For Details.
706241US In the interest of progress, we reserve the right to change specifications, equipment design or material
without notice. ©Kuhn North America, Inc. December 2014
Kuhn North America, Inc
1501 West Seventh Avenue
PO Box 167
Brodhead, WI 53520 USA
Phone: 608-897-2131
Fax: 608-897-2561
www.KuhnNorthAmerica.com
Kuhn Krause, Inc.
305 S. Monroe St.
PO Box 2707
Hutchinson, KS 67504 USA
Phone: 620-663-6161
Fax: 620-662-5903
www.KuhnKrause.com
DISC MOWER CONDITIONERS
DISC MOWERS
It has quick-change cutting blades – instead of taking out a bolt and nut, you
can change all the blades in a matter of minutes. The cutterbar door slides up and
back for easy access to service the cutterbar without having to crawl under a shield.
Ron Harleman
Ron Harleman, Missouri
FC 3560 TCD Mower Conditioner
original
lower case
thinner border
GMD 8730 FF
Disc Mower
lower case
Garamond
Kuhn mowers set the standard for cutting
performance with fast, clean cutting, rugged
durability and low maintenance. We have produced more
cutterbars than any other manufacturer over the past 45-plus years.
Our mowers are continually improved and enhanced to meet the
hay-cutting needs of both large and small operations.
FC 3160 TLD
Disc Mower
Conditioner
Upper case
Garamond
Kuhn offers a growing range of mower conditioners to meet your cutting and conditioning
needs. All-new side-pull and center pivot models incorporate technology that provides the ultimate
combination of productivity and performance. With simple, easy maintenance, high capacity, precise
conditioning and multiple windrow adjustments, we have the most advanced machines on the market.
Fast-Fit Blades
Available on select models
Digi-DryTM Finger Conditioner
original
GMD 2850 TL Disc Mower
lower case
thinner border
GMD 700 GII Disc Mower
FC 3160 TCD Disc Mower Conditioner
MODEL WORKING WIDTH
PZ 170 (Drum Mower)
5'5"
GMD 400
5'3"
GMD 55/500
6'7"
GMD 66/600 HD
7'10"
GMD 2850 TL
8'10"
GMD 700 HD
9'2"
GMD 3150 TL
10'2"
GMD 800 HD
10'2"
MODEL WORKING WIDTH
GMD 802 F-FF (front mount) 10'2"
GMD 350
11'6"
GMD 3510
11'6"
GMD 3550 TL
11'6"
GMD 4010
13'
GMD 4050 TL
13'
GMD 4410
14'3"
GMD 8730 FF* 26'9"-28'7"
®
Optidisc Lubed-for-Life Cutterbar
* The GMD 8730 FF requires the use of the GMD 802 F-FF
Available on select models.
lower case
Garamond
Upper case
MODEL
WORKING WIDTH CONDITIONING**
HITCH TYPE
Garamond
FC 243/283/313
7'10"/9'2"/10'2" PolyComb/Roller
Side pull
FC 2860/3160/3560 8'10"/10'2"/11'6"
Finger
Side pull
FC 283/313
9'2"/10'2"
PolyComb
Rear mounted
FC 303
9'10"
Finger/Roller Side pull/center pivot
FC 3160/3560/4060 10'2"/11'6"/13'
Finger
Center pivot
FC 313 F
10'2" PolyComb/Roller
Front mounted
FC 352
11'6"
Finger/Roller
Side pull
Red text in table denotes new product introduction for 2014
* The FC 813 & FC 883 FF require the use of the FC 313 F front-mount machines
** Most models are available with different conditioning system options
Available on select models
MODEL
WORKING
WIDTH
FC 353
11'6"
FC 4000
13'1"
Alterna 500
15'11"
FC 813*
26'7"
FC 883 FF*
28'10"
CONDITIONING**
Finger/Roller
Finger/Roller
Finger
Roller
PolyComb
HITCH
TYPE
Center pivot
Center pivot
Center pivot
Rear mounted
Rear mounted
DISC MOWER CONDITIONERS
DISC MOWERS
It has quick-change cutting blades – instead of taking out a bolt and nut, you
can change all the blades in a matter of minutes. The cutterbar door slides up and
back for easy access to service the cutterbar without having to crawl under a shield.
Ron Harleman
Ron Harleman, Missouri
FC 3560 TCD Mower Conditioner
original
lower case
thinner border
GMD 8730 FF
Disc Mower
lower case
Garamond
Kuhn mowers set the standard for cutting
performance with fast, clean cutting, rugged
durability and low maintenance. We have produced more
cutterbars than any other manufacturer over the past 45-plus years.
Our mowers are continually improved and enhanced to meet the
hay-cutting needs of both large and small operations.
FC 3160 TLD
Disc Mower
Conditioner
Upper case
Garamond
Kuhn offers a growing range of mower conditioners to meet your cutting and conditioning
needs. All-new side-pull and center pivot models incorporate technology that provides the ultimate
combination of productivity and performance. With simple, easy maintenance, high capacity, precise
conditioning and multiple windrow adjustments, we have the most advanced machines on the market.
Fast-Fit Blades
Available on select models
Digi-DryTM Finger Conditioner
original
GMD 2850 TL Disc Mower
lower case
thinner border
GMD 700 GII Disc Mower
FC 3160 TCD Disc Mower Conditioner
MODEL WORKING WIDTH
PZ 170 (Drum Mower)
5'5"
GMD 400
5'3"
GMD 55/500
6'7"
GMD 66/600 HD
7'10"
GMD 2850 TL
8'10"
GMD 700 HD
9'2"
GMD 3150 TL
10'2"
GMD 800 HD
10'2"
MODEL WORKING WIDTH
GMD 802 F-FF (front mount) 10'2"
GMD 350
11'6"
GMD 3510
11'6"
GMD 3550 TL
11'6"
GMD 4010
13'
GMD 4050 TL
13'
GMD 4410
14'3"
GMD 8730 FF* 26'9"-28'7"
®
Optidisc Lubed-for-Life Cutterbar
* The GMD 8730 FF requires the use of the GMD 802 F-FF
Available on select models.
lower case
Garamond
Upper case
MODEL
WORKING WIDTH CONDITIONING**
HITCH TYPE
Garamond
FC 243/283/313
7'10"/9'2"/10'2" PolyComb/Roller
Side pull
FC 2860/3160/3560 8'10"/10'2"/11'6"
Finger
Side pull
FC 283/313
9'2"/10'2"
PolyComb
Rear mounted
FC 303
9'10"
Finger/Roller Side pull/center pivot
FC 3160/3560/4060 10'2"/11'6"/13'
Finger
Center pivot
FC 313 F
10'2" PolyComb/Roller
Front mounted
FC 352
11'6"
Finger/Roller
Side pull
Red text in table denotes new product introduction for 2014
* The FC 813 & FC 883 FF require the use of the FC 313 F front-mount machines
** Most models are available with different conditioning system options
Available on select models
MODEL
WORKING
WIDTH
FC 353
11'6"
FC 4000
13'1"
Alterna 500
15'11"
FC 813*
26'7"
FC 883 FF*
28'10"
CONDITIONING**
Finger/Roller
Finger/Roller
Finger
Roller
PolyComb
HITCH
TYPE
Center pivot
Center pivot
Center pivot
Rear mounted
Rear mounted
TEDDERS
WHEEL RAKES
Our grazer hay is a really heavy crop and my original brand of rake wouldn’t
rake the heavy, grazer hay, but now with the SpeedRake from Kuhn, I can.
William Warwas, Texas
SR 112 GII SpeedRake
L to R: Joseph and William Warwas
lower case
thinner border
original
GF 10802 T GII
Rotary Tedder
Upper case
Garamond
lower case
Garamond
MODEL
GF 222
GF 502
GF 5202
GF 6502
GF 7702
GF 7802
WORKING WIDTH
8'6"
16'5"
17'1"
21'4"
25'7"
25'7"
SR 110 GII
Carted SpeedRake®
Upper case
Garamond
lower case
Garamond
Dry your hay faster and harvest sooner with Kuhn rotary tedders. Our tedders provide efficient, uniform fluffing at varying
speeds and smooth performance over irregular ground. The newest models have enhanced features that get you in and out of the field faster
to maximize your efficiency. With more choices of trailed tedders than any other manufacturer, we have the tedder to meet your needs.
GF 7902 Rotary Tedder
lower case
thinner border
original
The Kuhn SpeedRake continues to raise the bar with unmatched reliability and performance in the wheel rake market.
With a growing product line and newly redesigned models the best just keeps getting better. Along with the quality and simplicity you have come
to expect, the new SR 100 GII combines refined styling, advanced features and new options to provide the most value for your equipment dollars.
GF 5202 THA Rotary Tedder
MODEL
WORKING WIDTH
GF 7902
25'7"
GF 8702
28'6"
GF 10802
35'5"
GF 13002
42'8"
GF 17002
56'5"
HayBob 300/360
9'10"*
SR 616 GII High-Capacity SpeedRake
original
lower case
thinner border
SR 314 High-Capacity, Carted SpeedRake
Red text in table denotes new product introduction for 2014
* Working width when tedding.
lower case
Garamond
HayBob Tedder/Rake Combination
Upper case
Garamond
MODEL
WORKING WIDTH*
SR 108 GII 15'10"– 18'10"
SR 110 GII 16'11"– 21'2"
SR 112 GII 18'9"– 23'4"
SR 310
20'10"
SR 312
24'2"
MODEL
WORKING WIDTH*
SR 314
28'
SR 612 GII
25'
SR 614 GII
28'
SR 616 GII
31'
Red text in table denotes new product introduction for 2014
*Varies with crop conditions, includes windrow
TEDDERS
WHEEL RAKES
Our grazer hay is a really heavy crop and my original brand of rake wouldn’t
rake the heavy, grazer hay, but now with the SpeedRake from Kuhn, I can.
William Warwas, Texas
SR 112 GII SpeedRake
L to R: Joseph and William Warwas
lower case
thinner border
original
GF 10802 T GII
Rotary Tedder
Upper case
Garamond
lower case
Garamond
MODEL
GF 222
GF 502
GF 5202
GF 6502
GF 7702
GF 7802
WORKING WIDTH
8'6"
16'5"
17'1"
21'4"
25'7"
25'7"
SR 110 GII
Carted SpeedRake®
Upper case
Garamond
lower case
Garamond
Dry your hay faster and harvest sooner with Kuhn rotary tedders. Our tedders provide efficient, uniform fluffing at varying
speeds and smooth performance over irregular ground. The newest models have enhanced features that get you in and out of the field faster
to maximize your efficiency. With more choices of trailed tedders than any other manufacturer, we have the tedder to meet your needs.
GF 7902 Rotary Tedder
lower case
thinner border
original
The Kuhn SpeedRake continues to raise the bar with unmatched reliability and performance in the wheel rake market.
With a growing product line and newly redesigned models the best just keeps getting better. Along with the quality and simplicity you have come
to expect, the new SR 100 GII combines refined styling, advanced features and new options to provide the most value for your equipment dollars.
GF 5202 THA Rotary Tedder
MODEL
WORKING WIDTH
GF 7902
25'7"
GF 8702
28'6"
GF 10802
35'5"
GF 13002
42'8"
GF 17002
56'5"
HayBob 300/360
9'10"*
SR 616 GII High-Capacity SpeedRake
original
lower case
thinner border
SR 314 High-Capacity, Carted SpeedRake
Red text in table denotes new product introduction for 2014
* Working width when tedding.
lower case
Garamond
HayBob Tedder/Rake Combination
Upper case
Garamond
MODEL
WORKING WIDTH*
SR 108 GII 15'10"– 18'10"
SR 110 GII 16'11"– 21'2"
SR 112 GII 18'9"– 23'4"
SR 310
20'10"
SR 312
24'2"
MODEL
WORKING WIDTH*
SR 314
28'
SR 612 GII
25'
SR 614 GII
28'
SR 616 GII
31'
Red text in table denotes new product introduction for 2014
*Varies with crop conditions, includes windrow
ROTARY RAKES
original
MERGERS
We bought it because the hay was so thick that we were having
a hard time getting it flipped over and dried out enough to put
two windrows together. It doesn’t wind the hay into a rope – it
turns itcase
over and fluffs it up. It also works well for drying straw.
lower
thinner border
MM 900 Merge Maxx®
Triple Merger
Kevin McCarthy, Wisconsin
GA 4220 TH Rotary Rake
ower case
Garamond
Kevin McCarthy
GA 8731 Twin-Rotor,
Center-Delivery Rake
Upper case
Garamond
High-performance Kuhn mergers gently pick up the crop and deposit it onto the conveyor belt, preserving the
delicate leaves of forages, such as alfalfa. This reduced leaf loss increases yield and preserves the feed value of the forage.
Merging multiple windrows also maximizes harvesting efficiency, saving valuable time and fuel to grow your bottom line.
Kuhn rotary rakes produce fluffy, well-formed windrows to help you achieve faster drying. This allows you to
harvest your crops at their peak nutritional value with less reliance on the weather. Long, flexible tines touch the crop just once, lifting
and depositing it neatly into the windrow. The gentle raking action ensures that the leaves remain intact for maximum quality.
MODEL
WORKING WIDTH*
MM 300
9'6" – 18'
MM 900
29'10" – 34'5"
* Varies with crop conditions,
includes windrow
original
lower case
thinner border
MM 300 Merge Maxx Single Merger
MM 900 Windrow Merging Options
GA 8030 Twin-Rotor, Side-Delivery Rake
lower case
Garamond
Upper
case
** WORKING
MODEL
WIDTH*
Garamond
GA 4220 TH Single-Rotor, Side-Delivery Rake
MODEL** WORKING WIDTH*
MODEL** WORKING WIDTH*
MODEL** WORKING WIDTH*
GA 300/3200/3201
10'6"
GA 4521
14'9"
GA 7501
22'6" – 24'5"
GA 8731
25'3"– 28'2"
GA 4121
13'5"
GA 6002
11'6" – 19'
GA 7932
14'1"– 25'1"
GA 9032
17' – 28'10"
GA 4220/4221
13'5"
GA 6501
17'9" – 21'
GA 8030 23'11"– 27'3"
GA 9531
27'7"– 30'6"
GA 4321
13'9"
GA 6632
12'6" – 21'4"
GA 8121
GA 15031
30'10"– 48'3"
Red text in table denotes new product introduction for 2014
*Varies with crop conditions, includes windrow
**GA rotary rakes are available in trailed and mounted models
24'3"– 26'3"
ROTARY RAKES
original
MERGERS
We bought it because the hay was so thick that we were having
a hard time getting it flipped over and dried out enough to put
two windrows together. It doesn’t wind the hay into a rope – it
turns itcase
over and fluffs it up. It also works well for drying straw.
lower
thinner border
MM 900 Merge Maxx®
Triple Merger
Kevin McCarthy, Wisconsin
GA 4220 TH Rotary Rake
ower case
Garamond
Kevin McCarthy
GA 8731 Twin-Rotor,
Center-Delivery Rake
Upper case
Garamond
High-performance Kuhn mergers gently pick up the crop and deposit it onto the conveyor belt, preserving the
delicate leaves of forages, such as alfalfa. This reduced leaf loss increases yield and preserves the feed value of the forage.
Merging multiple windrows also maximizes harvesting efficiency, saving valuable time and fuel to grow your bottom line.
Kuhn rotary rakes produce fluffy, well-formed windrows to help you achieve faster drying. This allows you to
harvest your crops at their peak nutritional value with less reliance on the weather. Long, flexible tines touch the crop just once, lifting
and depositing it neatly into the windrow. The gentle raking action ensures that the leaves remain intact for maximum quality.
MODEL
WORKING WIDTH*
MM 300
9'6" – 18'
MM 900
29'10" – 34'5"
* Varies with crop conditions,
includes windrow
original
lower case
thinner border
MM 300 Merge Maxx Single Merger
MM 900 Windrow Merging Options
GA 8030 Twin-Rotor, Side-Delivery Rake
lower case
Garamond
Upper
case
** WORKING
MODEL
WIDTH*
Garamond
GA 4220 TH Single-Rotor, Side-Delivery Rake
MODEL** WORKING WIDTH*
MODEL** WORKING WIDTH*
MODEL** WORKING WIDTH*
GA 300/3200/3201
10'6"
GA 4521
14'9"
GA 7501
22'6" – 24'5"
GA 8731
25'3"– 28'2"
GA 4121
13'5"
GA 6002
11'6" – 19'
GA 7932
14'1"– 25'1"
GA 9032
17' – 28'10"
GA 4220/4221
13'5"
GA 6501
17'9" – 21'
GA 8030 23'11"– 27'3"
GA 9531
27'7"– 30'6"
GA 4321
13'9"
GA 6632
12'6" – 21'4"
GA 8121
GA 15031
30'10"– 48'3"
Red text in table denotes new product introduction for 2014
*Varies with crop conditions, includes windrow
**GA rotary rakes are available in trailed and mounted models
24'3"– 26'3"
ROUND BALERS
LARGE SQUARE BALERS
I used to spend hours working to unplug my old balers. With this drop floor design, I can clear one in
30 seconds or less. It’s really improved my time in the field because I’m not fighting plugs all the time.
Dan Collins, New York
VB 2160 Round Baler
Dan Collins
VB 2160
Round Baler
LSB 1290
Large Square Baler
Unique innovations make a real difference in field performance, bale density and bale quality. Kuhn round balers
continue to lead the industry with advanced features like the drop floor design available on OptiCut XL models. This design allows the
cutting floor to be lowered hydraulically from the tractor seat to clear blockages, saving time and maximizing productivity. With the most
efficient, reliable machines on the market we have the baler to meet your needs.
Consistently filled, super-dense, square-edged bales are what every producer demands. Kuhn large square balers
meet and exceed these expectations, while combining high output and maximum reliability to get the job done fast. Our balers feature
the simplest drive system in the industry, fewest moving parts, heaviest standard flywheel and longest standard bale chamber, to
provide outstanding durability and performance.
5
4
2
3
1
original
lower case
thinner border
(1) Crop is forced into the pre-chamber by the integral rotor,
a feeder fork (2) pushes crop into a uniform flake. Once the
pre-chamber (3) is full, the feeder fork takes an extended stroke
that pushes the flake into the bale chamber (4), where the
plunger (5) compresses the crop to form a rock hard bale.
Progressive Density System
VBP 2160 Round Baler/Wrapper Combination
lower case
Garamond
LSB 890 Large Square Baler
Upper case
Garamond
MODEL
VB 2160*
VB 2190*
VBP 2160 OptiCut
Red text in table denotes new
product introduction for 2014
* Cutting and non-cutting models
BALE SIZE
4x5
4x6
4x5
MODEL
LSB 890 OptiFeed/890 OptiCut*
3x3
LSB 1290 OptiFeed/1290 OmniCut*
3x4
* Cutting and non-cutting models
Pendulum Pickup
featured on select models
Drop
Floor Intake
featured on select models
OmniCut 23 Rotor –
Patented Integral Rotor Design
BALE SIZE
ROUND BALERS
LARGE SQUARE BALERS
I used to spend hours working to unplug my old balers. With this drop floor design, I can clear one in
30 seconds or less. It’s really improved my time in the field because I’m not fighting plugs all the time.
Dan Collins, New York
VB 2160 Round Baler
Dan Collins
VB 2160
Round Baler
LSB 1290
Large Square Baler
Unique innovations make a real difference in field performance, bale density and bale quality. Kuhn round balers
continue to lead the industry with advanced features like the drop floor design available on OptiCut XL models. This design allows the
cutting floor to be lowered hydraulically from the tractor seat to clear blockages, saving time and maximizing productivity. With the most
efficient, reliable machines on the market we have the baler to meet your needs.
Consistently filled, super-dense, square-edged bales are what every producer demands. Kuhn large square balers
meet and exceed these expectations, while combining high output and maximum reliability to get the job done fast. Our balers feature
the simplest drive system in the industry, fewest moving parts, heaviest standard flywheel and longest standard bale chamber, to
provide outstanding durability and performance.
5
4
2
3
1
original
lower case
thinner border
(1) Crop is forced into the pre-chamber by the integral rotor,
a feeder fork (2) pushes crop into a uniform flake. Once the
pre-chamber (3) is full, the feeder fork takes an extended stroke
that pushes the flake into the bale chamber (4), where the
plunger (5) compresses the crop to form a rock hard bale.
Progressive Density System
VBP 2160 Round Baler/Wrapper Combination
lower case
Garamond
LSB 890 Large Square Baler
Upper case
Garamond
MODEL
VB 2160*
VB 2190*
VBP 2160 OptiCut
Red text in table denotes new
product introduction for 2014
* Cutting and non-cutting models
BALE SIZE
4x5
4x6
4x5
MODEL
LSB 890 OptiFeed/890 OptiCut*
3x3
LSB 1290 OptiFeed/1290 OmniCut*
3x4
* Cutting and non-cutting models
Pendulum Pickup
featured on select models
Drop
Floor Intake
featured on select models
OmniCut 23 Rotor –
Patented Integral Rotor Design
BALE SIZE
WRAPPERS
POWER TILLAGE/LAND MAINTENANCE
original
thinner border
Yolland Michaud, Quebec
Premia 4000 Seed Drill with HR 4003 Power Harrow
lower case
thinner border
original
I really like using the Premia in combination with my power
harrow – preparing the seedbed and seeding all in one pass.
lower case
Yolland Michaud
Premia 4000
Mechanical Seed Drill
Axis 50.1 H-EMC-W
Fertilizer Spreader with ISOBUS
RW 1100
and SW 1104
Trailer Kit
Upper case
and Power Pack
Garamond
lower case
Garamond
lower case
Garamond
Upper case
Garamond
HRB 252 D
Power Harrow
Every minute counts when weather conditions are uncertain. Wrap bales quickly and reliably with quality Kuhn RW round
bale wrappers and SW square bale wrappers. New computer controls available on most models maximize efficiency and performance.
Our wrappers provide consistent, high-quality wrapped bales to help ensure optimum forage quality throughout the storage period.
Kuhn offers a broad range of power tillers and power harrows designed to perform in all types of soils and with all types
of specialty crops to help increase yields. The power tillers and harrows can be used alone or in combination with one of our mounted
mechanical seed drills. We also offer a range of highly accurate broadcast spreaders for the application of dry fertilizer and seed. In addition, we have
specialized mowers and shredders for the maintenance needs of municipalities, orchards, nurseries and vineyards.
lower case
thinner border
original
SW 4004 Square Bale Wrapper
TB 211 Offset Mower
RW 1600 Round Bale Wrapper
Joystick .
MODEL
BALE SIZE
lower case
Garamond
RW 1100/1400/1600 M/C*
4 x (3-5) round
EL 82 Power Tiller
Upper case
Garamond
SW 1104/1604/ M/C*
2 x 3 or 3 x 3 up to 6' long, up to 5 x 4 round
PRODUCT RANGE
SW 4004
Up to 4 x 4, up to 6'6" long, up to 4 x 4 round
15 models of HR & HRB power harrows from
29 models of EL power tillers from
* M = Manual Control C = Computer Control
New terminal with
integrated joystick
available on all
“C” models.
3 models of Premia seed drills from
4' – 20'
3'2" – 15'
8'2" – 13'1"
15 models of shredders & offset mowers from 3'2" – 7'
15 models of fertilizer spreaders from 17.5 – 141 cu. ft.
WRAPPERS
POWER TILLAGE/LAND MAINTENANCE
original
thinner border
Yolland Michaud, Quebec
Premia 4000 Seed Drill with HR 4003 Power Harrow
lower case
thinner border
original
I really like using the Premia in combination with my power
harrow – preparing the seedbed and seeding all in one pass.
lower case
Yolland Michaud
Premia 4000
Mechanical Seed Drill
Axis 50.1 H-EMC-W
Fertilizer Spreader with ISOBUS
RW 1100
and SW 1104
Trailer Kit
Upper case
and Power Pack
Garamond
lower case
Garamond
lower case
Garamond
Upper case
Garamond
HRB 252 D
Power Harrow
Every minute counts when weather conditions are uncertain. Wrap bales quickly and reliably with quality Kuhn RW round
bale wrappers and SW square bale wrappers. New computer controls available on most models maximize efficiency and performance.
Our wrappers provide consistent, high-quality wrapped bales to help ensure optimum forage quality throughout the storage period.
Kuhn offers a broad range of power tillers and power harrows designed to perform in all types of soils and with all types
of specialty crops to help increase yields. The power tillers and harrows can be used alone or in combination with one of our mounted
mechanical seed drills. We also offer a range of highly accurate broadcast spreaders for the application of dry fertilizer and seed. In addition, we have
specialized mowers and shredders for the maintenance needs of municipalities, orchards, nurseries and vineyards.
lower case
thinner border
original
SW 4004 Square Bale Wrapper
TB 211 Offset Mower
RW 1600 Round Bale Wrapper
Joystick .
MODEL
BALE SIZE
lower case
Garamond
RW 1100/1400/1600 M/C*
4 x (3-5) round
EL 82 Power Tiller
Upper case
Garamond
SW 1104/1604/ M/C*
2 x 3 or 3 x 3 up to 6' long, up to 5 x 4 round
PRODUCT RANGE
SW 4004
Up to 4 x 4, up to 6'6" long, up to 4 x 4 round
15 models of HR & HRB power harrows from
29 models of EL power tillers from
* M = Manual Control C = Computer Control
New terminal with
integrated joystick
available on all
“C” models.
3 models of Premia seed drills from
4' – 20'
3'2" – 15'
8'2" – 13'1"
15 models of shredders & offset mowers from 3'2" – 7'
15 models of fertilizer spreaders from 17.5 – 141 cu. ft.
PLOWS
original
PRIMARY TILLAGE
lower case
thinner border
Some of the reasons we chose the Dominator were
dependability and parts, service and sales support.
Seth Lettow, Iowa
Dominator 4850
lower case
Garamond
Vari-Master 153
Fully Mounted
Upper
case Plow
Rollover
Garamond
Seth Lettow
DOMINATOR®
Primary Tillage
System
Modern, high-capacity Kuhn plows provide fast, efficient performance while helping preserve soil quality and
increase crop productivity. These plows are ruggedly built for long life, while keeping maintenance costs low. Several new models offer
improved strength and durability to match the power of today’s higher horsepower tractors. With both conventional and roll-over models,
along with multiple moldboard and bottom reset options, our plows allow you to choose the best setup to meet your needs.
Kuhn Krause primary tillage tools promote the breakdown of crop residue and allow excellent root development for
the next crop. These deep tillage tools break up compaction and aerate the soil allowing improved water infiltration, while incorporating
residue and providing a variety of field finishes. The Kuhn Krause DOMINATOR has changed fall tillage, setting new standards for residue
management, compaction removal and mixing of residue in one pass.
4830 In-Line Ripper
LANDSAVER® Coulter Chisel
Challenger Semi-Mounted Rollover Plow
PRODUCT RANGE
Fully mounted rollover plows – 41 models, 2-7 bottoms
Semi-mounted rollover plows – 20 models, 5-12 bottoms
Semi-mounted conventional plows – 8 models, 4-7 bottoms
MODEL
DOMINATOR 4850
LANDSAVER 4800
4000 Chisel Plow
4830 In-Line Ripper
Vari-Lander XC Semi-Mounted Conventional Plow
WORKING WIDTH
10'6" – 19'6"
9'4" – 28'
17' – 39'
12'6" – 22'6"
PLOWS
original
PRIMARY TILLAGE
lower case
thinner border
Some of the reasons we chose the Dominator were
dependability and parts, service and sales support.
Seth Lettow, Iowa
Dominator 4850
lower case
Garamond
Vari-Master 153
Fully Mounted
Upper
case Plow
Rollover
Garamond
Seth Lettow
DOMINATOR®
Primary Tillage
System
Modern, high-capacity Kuhn plows provide fast, efficient performance while helping preserve soil quality and
increase crop productivity. These plows are ruggedly built for long life, while keeping maintenance costs low. Several new models offer
improved strength and durability to match the power of today’s higher horsepower tractors. With both conventional and roll-over models,
along with multiple moldboard and bottom reset options, our plows allow you to choose the best setup to meet your needs.
Kuhn Krause primary tillage tools promote the breakdown of crop residue and allow excellent root development for
the next crop. These deep tillage tools break up compaction and aerate the soil allowing improved water infiltration, while incorporating
residue and providing a variety of field finishes. The Kuhn Krause DOMINATOR has changed fall tillage, setting new standards for residue
management, compaction removal and mixing of residue in one pass.
4830 In-Line Ripper
LANDSAVER® Coulter Chisel
Challenger Semi-Mounted Rollover Plow
PRODUCT RANGE
Fully mounted rollover plows – 41 models, 2-7 bottoms
Semi-mounted rollover plows – 20 models, 5-12 bottoms
Semi-mounted conventional plows – 8 models, 4-7 bottoms
MODEL
DOMINATOR 4850
LANDSAVER 4800
4000 Chisel Plow
4830 In-Line Ripper
Vari-Lander XC Semi-Mounted Conventional Plow
WORKING WIDTH
10'6" – 19'6"
9'4" – 28'
17' – 39'
12'6" – 22'6"
SECONDARY TILLAGE
DISC HARROWS
Design is everything when it comes to farm equipment,
and by far, this Kuhn Krause field cultivator had the
best design. It had all the features I thought it should have.
Hubert Ragsdale, Arkansas
5635 Field Cultivator
Hubert Ragsdale
LANDSTAR®
Combination
Soil Finisher
lower case
thinner border
original
8210 Class II
Tandem Disc
Upper case
Harrow
Garamond
lower case
Garamond
Kuhn Krause secondary tillage tools deliver excellent residue flow handling capability, soil mixing, conditioning and
leveling in one pass. They provide excellent depth control for uniform seedbed preparation and are designed to consistently manage
residue with a variety of 24/7® Leveling Systems – all leading to superior seed-to-soil contact.
original
LANDSMAN® Combination Soil Finisher
MODEL
WORKING WIDTH
LANDSMAN 6200
18' – 45'
LANDSTAR 6400
18' – 36'
5635 Field Cultivator
20'6" – 50'6"
Kuhn Krause offers a growing line of disc harrows that provide excellent residue cutting and seedbed preparation to help ensure
proper soil management. Residue Razor® disc blades combined with an excellent weight-to-blade ratio ensure consistent soil penetration in a variety
of conditions. New models incorporate advanced features that decrease maintenance and improve service life. Larger sizes improve efficiency for the
largest acreage producers.
lower case
thinner border
8310 with Quad-Fold Design
5635 Field Cultivator
8210 Class II Tandem Disc Harrow
lower case
Garamond
Upper case
MODEL
Garamond
5800 Offset Disc Harrow
7300 Class I Tandem Disc Harrow
8100 Class I Tandem Disc Harrow
8210 Class II Tandem Disc Harrow
8310 Class III Tandem Disc Harrow
Red text in table denotes new product introduction for 2014
WORKING WIDTH
12'3" – 20'2"
18'1" – 34'1"
12'3" – 18'1"
18'10" – 44'3"
19'10" – 37'3"
SECONDARY TILLAGE
DISC HARROWS
Design is everything when it comes to farm equipment,
and by far, this Kuhn Krause field cultivator had the
best design. It had all the features I thought it should have.
Hubert Ragsdale, Arkansas
5635 Field Cultivator
Hubert Ragsdale
LANDSTAR®
Combination
Soil Finisher
lower case
thinner border
original
8210 Class II
Tandem Disc
Upper case
Harrow
Garamond
lower case
Garamond
Kuhn Krause secondary tillage tools deliver excellent residue flow handling capability, soil mixing, conditioning and
leveling in one pass. They provide excellent depth control for uniform seedbed preparation and are designed to consistently manage
residue with a variety of 24/7® Leveling Systems – all leading to superior seed-to-soil contact.
original
LANDSMAN® Combination Soil Finisher
MODEL
WORKING WIDTH
LANDSMAN 6200
18' – 45'
LANDSTAR 6400
18' – 36'
5635 Field Cultivator
20'6" – 50'6"
Kuhn Krause offers a growing line of disc harrows that provide excellent residue cutting and seedbed preparation to help ensure
proper soil management. Residue Razor® disc blades combined with an excellent weight-to-blade ratio ensure consistent soil penetration in a variety
of conditions. New models incorporate advanced features that decrease maintenance and improve service life. Larger sizes improve efficiency for the
largest acreage producers.
lower case
thinner border
8310 with Quad-Fold Design
5635 Field Cultivator
8210 Class II Tandem Disc Harrow
lower case
Garamond
Upper case
MODEL
Garamond
5800 Offset Disc Harrow
7300 Class I Tandem Disc Harrow
8100 Class I Tandem Disc Harrow
8210 Class II Tandem Disc Harrow
8310 Class III Tandem Disc Harrow
Red text in table denotes new product introduction for 2014
WORKING WIDTH
12'3" – 20'2"
18'1" – 34'1"
12'3" – 18'1"
18'10" – 44'3"
19'10" – 37'3"
VERTICAL TILLAGE
STRIP TILL
I like how it crushes the clumps and places the fertilizer while leaving a
nice black strip. It does a very good job for what we are trying to accomplish.
Terry Wieting, South Dakota
16-Row Gladiator
Eric Decker – Wieting Farms
GLADIATOR®
Precision Tillage System
EXCELERATOR®
Vertical Tillage System
ST-PROTM Row Unit
The Kuhn Krause EXCELERATOR has revolutionized vertical tillage. It delivers
high-speed residue cutting and soil mixing, incorporating many tillage techniques in a single pass.
With the exclusive Excalibur® Blades and Star WheelTM Treaders, this vertical tillage system does an
excellent job of cutting residue, leveling soil, downsizing clods and anchoring residue, while the
24/7® Soil Conditioning Reel finishes the operation – for fall conditions or spring seedbed preparation.
EXCELERATORVertical Tillage System
MODEL
WORKING WIDTH
EXCELERATOR 8000
14' – 40'
Excalibur Blade
EXCELERATOR– Adjustable Gang Angle
The Kuhn Krause GLADIATOR Precision Tillage System offers on-row
conservation tillage, precise nutrient placement and non-stop seedbed
conditioning to help progressive producers manage input costs. The
innovative fixed-frame toolbar and ST-PRO Row Units are easy to adjust and require
no daily maintenance. They contour to ground surface conditions allowing the shanks
to consistently operate at the customer-determined depth. This is more than just "
strip-till," it is precision nutrient and seedbed management.
GLADIATOR 1200M 3-Point Mounted
GLADIATOR Precision Tillage System
MODEL
GLADIATOR 1200M (mounted)
GLADIATOR 1200 (trailed)
24-Row Strip-Till
WORKING WIDTH
15' – 30'
20' – 40'
60'
VERTICAL TILLAGE
STRIP TILL
I like how it crushes the clumps and places the fertilizer while leaving a
nice black strip. It does a very good job for what we are trying to accomplish.
Terry Wieting, South Dakota
16-Row Gladiator
Eric Decker – Wieting Farms
GLADIATOR®
Precision Tillage System
EXCELERATOR®
Vertical Tillage System
ST-PROTM Row Unit
The Kuhn Krause EXCELERATOR has revolutionized vertical tillage. It delivers
high-speed residue cutting and soil mixing, incorporating many tillage techniques in a single pass.
With the exclusive Excalibur® Blades and Star WheelTM Treaders, this vertical tillage system does an
excellent job of cutting residue, leveling soil, downsizing clods and anchoring residue, while the
24/7® Soil Conditioning Reel finishes the operation – for fall conditions or spring seedbed preparation.
EXCELERATORVertical Tillage System
MODEL
WORKING WIDTH
EXCELERATOR 8000
14' – 40'
Excalibur Blade
EXCELERATOR– Adjustable Gang Angle
The Kuhn Krause GLADIATOR Precision Tillage System offers on-row
conservation tillage, precise nutrient placement and non-stop seedbed
conditioning to help progressive producers manage input costs. The
innovative fixed-frame toolbar and ST-PRO Row Units are easy to adjust and require
no daily maintenance. They contour to ground surface conditions allowing the shanks
to consistently operate at the customer-determined depth. This is more than just "
strip-till," it is precision nutrient and seedbed management.
GLADIATOR 1200M 3-Point Mounted
GLADIATOR Precision Tillage System
MODEL
GLADIATOR 1200M (mounted)
GLADIATOR 1200 (trailed)
24-Row Strip-Till
WORKING WIDTH
15' – 30'
20' – 40'
60'
PACKERS
MECHANICAL SEED DRILLS
With the walking dual wheels on the Packer you
don't have to worry about tire and wheel damage
when you leave the edge of the road [during transport].
Frank Farney, Indiana
40' 4400 Packer
L to R: Justin and Frank Farney
5200 PRO System Grain Drill
4400 Packer with Flex Wing
Kuhn Krause packers utilize optional large notched rollers or “V” packer wheels made of ductile cast iron that
downsize clods and uniformly firm the seedbed across the width of the machine. This provides an ideal seedbed that
has uniform density soil characteristics and sets the stage for good seed-to-soil contact.
Kuhn Krause mechanical seed drills deliver excellent seed placement in conventional, minimum-till and no-till conditions.
Specially designed PRO Openers deliver seed and fertilizer at precise depths to ensure consistent seed-to-soil contact and uniform emergence. Folding
capabilities and assorted mounting configurations offer excellent transport dimensions, providing a machine to meet the needs of any operation.
“V” Packer Option
PRO – Precision Residue Opener
HR PRO – High-Residue Precision Opener
4400 Packer with Flex Wing
MODEL
4400 Packer
5200 PRO System Grain Drill
WORKING WIDTH
12' – 46'
MODEL
5200M Grain Drill (mounted)
5200 Grain Drill (trailed)
5200NT No-Till Grain Drill (trailed)
4400 Packer
WORKING WIDTH
15' and 20'
25' – 36'
10' – 20'
PACKERS
MECHANICAL SEED DRILLS
With the walking dual wheels on the Packer you
don't have to worry about tire and wheel damage
when you leave the edge of the road [during transport].
Frank Farney, Indiana
40' 4400 Packer
L to R: Justin and Frank Farney
5200 PRO System Grain Drill
4400 Packer with Flex Wing
Kuhn Krause packers utilize optional large notched rollers or “V” packer wheels made of ductile cast iron that
downsize clods and uniformly firm the seedbed across the width of the machine. This provides an ideal seedbed that
has uniform density soil characteristics and sets the stage for good seed-to-soil contact.
Kuhn Krause mechanical seed drills deliver excellent seed placement in conventional, minimum-till and no-till conditions.
Specially designed PRO Openers deliver seed and fertilizer at precise depths to ensure consistent seed-to-soil contact and uniform emergence. Folding
capabilities and assorted mounting configurations offer excellent transport dimensions, providing a machine to meet the needs of any operation.
“V” Packer Option
PRO – Precision Residue Opener
HR PRO – High-Residue Precision Opener
4400 Packer with Flex Wing
MODEL
4400 Packer
5200 PRO System Grain Drill
WORKING WIDTH
12' – 46'
MODEL
5200M Grain Drill (mounted)
5200 Grain Drill (trailed)
5200NT No-Till Grain Drill (trailed)
4400 Packer
WORKING WIDTH
15' and 20'
25' – 36'
10' – 20'
original
wer case
ramond
MIXERS & FEEDERS
VERTICAL MIXERS
lower case
thinner border
I really like the versatility of the different feedstuffs that it can mix. I also appreciate the balance lower case
and design of machine – it’s about one-third larger than original
my old mixer and pulls just as easy.thinner border
Jeremy Mayer, Wisconsin
VT 144 Vertical Maxx® Twin-Auger Mixer
RA 142 HelixTM
Reel Auggie® Mixer
Upper case
Garamond
Jeremy Mayer
lower case
Garamond
VTC 1120
Vertical Maxx®
Twin-Auger
Upper case
Commercial Mixer
Garamond
Revolutionary
Helix Reel
Kuhn Knight reel and 4-auger mixers help mix cost-effective rations using a wide variety of economical feedstuffs.
Cost-effective rations mean higher profitability for any operation. These quality machines also provide fast, thorough mixing with low
horsepower requirements to further maximize efficiency and productivity. The RA and RC models feature the all-new Helix Reel. This
open-center design eliminates obstructions for outstanding feed movement and unparalleled mixing action.
3570 Primor® Bale Processor/Blower/Feeder
4072 Botec® 4-Auger Mixer
MODEL
CAPACITY
Reel Auggie 3115
147 cu. ft.
Reel Auggie 3120
216 cu. ft.
Reel Auggie 3125
250 cu. ft.
Reel Auggie 3130
300 cu. ft.
Reel Auggie RA 136 360 cu. ft.
Reel Auggie RA 142 420 cu. ft.
Reel Commercial RC250 500cu. ft.
Reel Commercial RC260 600cu. ft.
Reel Commercial RC270 700cu.ft.
Reel Commercial RC295 950cu. ft.
With many new and redesigned models, Kuhn Knight single- and twin-auger vertical mixers have
taken a big step forward in mixing performance. Our vertical mixers process and mix the widest variety of
feedstuffs, including round bales, providing ration versatility. Improved feed movement provides a fast, complete mix for
a fluffy and palatable ration. With a growing range of models and sizes we have a vertical mixer to meet the needs of any operation.
MODEL
Botec 4-Auger 4136
Botec 4-Auger 4142
Botec 4-Auger 4052
Botec 4-Auger 4063
Botec 4-Auger 4072
Botec 4-Auger 4090
ProFeed 70110
Primor 2060 M
Primor 3570
Primor 5570
Red text in table denotes new product introduction for 2014
CAPACITY
360 cu. ft.
420 cu. ft.
525 cu. ft.
630 cu. ft.
720 cu. ft.
900 cu. ft.
1,100 cu. ft.
76 cu. ft.
124 cu. ft.
194 cu. ft.
VSL 142 Vertical Maxx Single-Auger, Low-Profile Mixer
VT 144 Vertical Maxx Twin-Auger Mixer
MODEL*
Vertical Maxx 5127 S
Vertical Maxx 5135 S
Vertical Maxx 5143 S
Vertical Maxx VSL142 S
Vertical Maxx VSL150 S
CAPACITY
270 cu. ft.
350 cu. ft.
430 cu. ft.
420 cu. ft.
500 cu. ft.
Red text in table denotes new product introduction for 2014
70110 ProFeed® Delivery Box
* S denotes single auger, T denotes twin auger
MODEL*
Vertical Maxx VT 132 T
Vertical Maxx VT 144 T
Vertical Maxx VT 156 T
Vertical Maxx VT 168 T
Vertical Maxx VT 180 T
CAPACITY
320 cu. ft.
440 cu. ft.
560 cu. ft.
680 cu. ft.
800 cu. ft.
MODEL*
CAPACITY
Vertical Maxx VT 1100 T
1,000 cu. ft.
Vertical Maxx VTC 180 T
800 cu. ft.
Vertical Maxx VTC 1100 T
1,000 cu. ft.
Vertical Maxx VTC 1120T 1,200 cu. ft.
original
wer case
ramond
MIXERS & FEEDERS
VERTICAL MIXERS
lower case
thinner border
I really like the versatility of the different feedstuffs that it can mix. I also appreciate the balance lower case
and design of machine – it’s about one-third larger than original
my old mixer and pulls just as easy.thinner border
Jeremy Mayer, Wisconsin
VT 144 Vertical Maxx® Twin-Auger Mixer
RA 142 HelixTM
Reel Auggie® Mixer
Upper case
Garamond
Jeremy Mayer
lower case
Garamond
VTC 1120
Vertical Maxx®
Twin-Auger
Upper case
Commercial Mixer
Garamond
Revolutionary
Helix Reel
Kuhn Knight reel and 4-auger mixers help mix cost-effective rations using a wide variety of economical feedstuffs.
Cost-effective rations mean higher profitability for any operation. These quality machines also provide fast, thorough mixing with low
horsepower requirements to further maximize efficiency and productivity. The RA and RC models feature the all-new Helix Reel. This
open-center design eliminates obstructions for outstanding feed movement and unparalleled mixing action.
3570 Primor® Bale Processor/Blower/Feeder
4072 Botec® 4-Auger Mixer
MODEL
CAPACITY
Reel Auggie 3115
147 cu. ft.
Reel Auggie 3120
216 cu. ft.
Reel Auggie 3125
250 cu. ft.
Reel Auggie 3130
300 cu. ft.
Reel Auggie RA 136 360 cu. ft.
Reel Auggie RA 142 420 cu. ft.
Reel Commercial RC250 500cu. ft.
Reel Commercial RC260 600cu. ft.
Reel Commercial RC270 700cu.ft.
Reel Commercial RC295 950cu. ft.
With many new and redesigned models, Kuhn Knight single- and twin-auger vertical mixers have
taken a big step forward in mixing performance. Our vertical mixers process and mix the widest variety of
feedstuffs, including round bales, providing ration versatility. Improved feed movement provides a fast, complete mix for
a fluffy and palatable ration. With a growing range of models and sizes we have a vertical mixer to meet the needs of any operation.
MODEL
Botec 4-Auger 4136
Botec 4-Auger 4142
Botec 4-Auger 4052
Botec 4-Auger 4063
Botec 4-Auger 4072
Botec 4-Auger 4090
ProFeed 70110
Primor 2060 M
Primor 3570
Primor 5570
Red text in table denotes new product introduction for 2014
CAPACITY
360 cu. ft.
420 cu. ft.
525 cu. ft.
630 cu. ft.
720 cu. ft.
900 cu. ft.
1,100 cu. ft.
76 cu. ft.
124 cu. ft.
194 cu. ft.
VSL 142 Vertical Maxx Single-Auger, Low-Profile Mixer
VT 144 Vertical Maxx Twin-Auger Mixer
MODEL*
Vertical Maxx 5127 S
Vertical Maxx 5135 S
Vertical Maxx 5143 S
Vertical Maxx VSL142 S
Vertical Maxx VSL150 S
CAPACITY
270 cu. ft.
350 cu. ft.
430 cu. ft.
420 cu. ft.
500 cu. ft.
Red text in table denotes new product introduction for 2014
70110 ProFeed® Delivery Box
* S denotes single auger, T denotes twin auger
MODEL*
Vertical Maxx VT 132 T
Vertical Maxx VT 144 T
Vertical Maxx VT 156 T
Vertical Maxx VT 168 T
Vertical Maxx VT 180 T
CAPACITY
320 cu. ft.
440 cu. ft.
560 cu. ft.
680 cu. ft.
800 cu. ft.
MODEL*
CAPACITY
Vertical Maxx VT 1100 T
1,000 cu. ft.
Vertical Maxx VTC 180 T
800 cu. ft.
Vertical Maxx VTC 1100 T
1,000 cu. ft.
Vertical Maxx VTC 1120T 1,200 cu. ft.
BOX SPREADERS
original
SIDE DISCHARGE SPREADERS
lower case
thinner border
It’s nice having the onboard scale, as we can see
how even an application we’re giving the farmer.
Janesville Wastewater Utility Crew
lower case
Garamond
Joe Zakovec
City of Janesville Wastewater Utility – Janesville, Wisconsin
8132 Slinger Truck-Mounted Manure Spreaders
PS 160
ProSpread®
with AccuSpread®
Upper case
Spinner Discharge
Garamond
8124 ProTwin®
Slinger®
Kuhn Knight apron and push-type box spreaders are ideal for spreading all types of solid materials. These highquality machines set the standard for reliability and spreading performance. VertiSpread® vertical beaters provide a wide and consistent
spread pattern to maximize the nutrient value of manure. AccuSpread® spinner beaters on the PS 160 and PSC models offer an even more
uniform, controlled spread of flowable materials.
PSC 161 ProSpread Commercial with VertiSpread Beaters
The Kuhn Knight ProTwin Slinger spreads the widest variety of materials, from solids to slurry, while providing an
even and controlled spread pattern. This accurate application will help you utilize the nutrient value of manure and reduce purchased
fertilizer costs. There is a size to fit every operation, including the largest side-delivery spreader available on the market today.
Optional scale available on
PSC, PS 160 and truck mounted
8132 Slinger spreaders
8132 ProTwin Slinger
MODEL HEAPED CAPACITY
EasySpread® 1212
117 cu. ft.
EasySpread 1215
146 cu. ft.
EasySpread 1219
189 cu. ft.
EasySpread 1224
240 cu. ft.
EasySpread 1230
295 cu. ft.
ProSpread 1130
320 cu. ft.
ProSpread 1140
380 cu. ft.
2044 ProPush® with VertiSpread Beaters
MODEL HEAPED CAPACITY
ProSpread PS 150 500 cu. ft.
ProSpread PS 160 600 cu. ft.
ProSpread PSC 161 610 cu. ft.
ProSpread PSC 171 710 cu. ft.
ProSpread PSC 181 810 cu. ft.
ProPush 2044
440 cu. ft.
ProPush 2054
540 cu. ft.
MODEL
CAPACITY
ProTwin Slinger 8110 1008 gal.
ProTwin Slinger 8114 1426 gal.
ProTwin Slinger 8118 1818 gal.
ProTwin Slinger 8124 2417 gal.
8114 ProTwin Slinger
MODEL
CAPACITY
ProTwin Slinger 8132 3251 gal.
ProTwin Slinger 8141 4060 gal.
ProTwin Slinger 8150 5000 gal.
BOX SPREADERS
original
SIDE DISCHARGE SPREADERS
lower case
thinner border
It’s nice having the onboard scale, as we can see
how even an application we’re giving the farmer.
Janesville Wastewater Utility Crew
lower case
Garamond
Joe Zakovec
City of Janesville Wastewater Utility – Janesville, Wisconsin
8132 Slinger Truck-Mounted Manure Spreaders
PS 160
ProSpread®
with AccuSpread®
Upper case
Spinner Discharge
Garamond
8124 ProTwin®
Slinger®
Kuhn Knight apron and push-type box spreaders are ideal for spreading all types of solid materials. These highquality machines set the standard for reliability and spreading performance. VertiSpread® vertical beaters provide a wide and consistent
spread pattern to maximize the nutrient value of manure. AccuSpread® spinner beaters on the PS 160 and PSC models offer an even more
uniform, controlled spread of flowable materials.
PSC 161 ProSpread Commercial with VertiSpread Beaters
The Kuhn Knight ProTwin Slinger spreads the widest variety of materials, from solids to slurry, while providing an
even and controlled spread pattern. This accurate application will help you utilize the nutrient value of manure and reduce purchased
fertilizer costs. There is a size to fit every operation, including the largest side-delivery spreader available on the market today.
Optional scale available on
PSC, PS 160 and truck mounted
8132 Slinger spreaders
8132 ProTwin Slinger
MODEL HEAPED CAPACITY
EasySpread® 1212
117 cu. ft.
EasySpread 1215
146 cu. ft.
EasySpread 1219
189 cu. ft.
EasySpread 1224
240 cu. ft.
EasySpread 1230
295 cu. ft.
ProSpread 1130
320 cu. ft.
ProSpread 1140
380 cu. ft.
2044 ProPush® with VertiSpread Beaters
MODEL HEAPED CAPACITY
ProSpread PS 150 500 cu. ft.
ProSpread PS 160 600 cu. ft.
ProSpread PSC 161 610 cu. ft.
ProSpread PSC 171 710 cu. ft.
ProSpread PSC 181 810 cu. ft.
ProPush 2044
440 cu. ft.
ProPush 2054
540 cu. ft.
MODEL
CAPACITY
ProTwin Slinger 8110 1008 gal.
ProTwin Slinger 8114 1426 gal.
ProTwin Slinger 8118 1818 gal.
ProTwin Slinger 8124 2417 gal.
8114 ProTwin Slinger
MODEL
CAPACITY
ProTwin Slinger 8132 3251 gal.
ProTwin Slinger 8141 4060 gal.
ProTwin Slinger 8150 5000 gal.
From tillage to harvest and everything in between, Kuhn and Kuhn Krause have the
most complete line of specialized equipment for the full crop production cycle!
See Your Local Dealer
Retail Financing Is Available.
Ask Your Dealer For Details.
706241US In the interest of progress, we reserve the right to change specifications, equipment design or material
without notice. ©Kuhn North America, Inc. December 2014
Kuhn North America, Inc
1501 West Seventh Avenue
PO Box 167
Brodhead, WI 53520 USA
Phone: 608-897-2131
Fax: 608-897-2561
www.KuhnNorthAmerica.com
Kuhn Krause, Inc.
305 S. Monroe St.
PO Box 2707
Hutchinson, KS 67504 USA
Phone: 620-663-6161
Fax: 620-662-5903
www.KuhnKrause.com