Disc
Mowers
Fast, clean cutting, rugged
durability and low maintenance
It’s as aggressive as you want it to be or as
gentle as you want it to be,” Carpenter says of
the mower’s gearbox. “The all-around control
with the mower is a nice thing. It has a lot of
adjustment points on it. I can either
windrow it or leave the crop full width.
Chad Carpenter, New York
FC 3560 TLD Mower Conditioner
GMD 3550 TL
Trailed Disc Mower
Kuhn mowers set the standard for cutting performance with fast, clean cutting, rugged durability and low maintenance. Our mowers are
continually improved and enhanced to meet the hay-cutting needs of both large and small operations. Today the Kuhn mower line is stronger than ever and
continues leading hay cutting into the future!
GMD 280 Premium Disc Mower
Model
WorkingWidth
PZ 170 (Drum Mower)
GMD 16 Select
GMD 20 Select
GMD 24 Select
GMD 240 Premium
GMD 2850 TL
GMD 28 Select
GMD 280 Premium
5'5"
5'3"
6'7"
7'10"
7'10"
8'10"
9'2"
9'2"
Model
WorkingWidth
GMD 8730 FF Disc Mower
Optidisc® Lubed-for-Life Cutterbar
GMD 310 Premium
10'2"
GMD 3150 TL
10'2"
GMD 802 F-FF(front mount) 10'2"
GMD 350/3510/3550 TL 11'6"
GMD 4010/4050 TL
13'
GMD 4410
14'3"
GMD 8730 FF*
26'9"-28'7"
* The GMD 8730 FF requires the use of the GMD 802 F-FF
Available on certain models.
Disc Mower
Conditioners
New technology for ultimate
productivity and performance
FC 3525 DF & 10030 D
Triple Mower Conditioner
Kuhn offers a growing range of mower conditioners, including all-new, steel roller conditioner
models, to meet your cutting and conditioning needs. The new triple mower conditioner combination gives you
the ability to cut and condition up to 32'6" of crop in a single pass. With simple, easy maintenance, high capacity,
precise conditioning and multiple windrow adjustments, we have the most advanced machines on the market.
Steel Roller Conditioner
Diamond Block®
Rubber Roller Conditioner
DigiDry® Finger Conditioner
FC 3160 TLR Disc Mower Conditioner
Model
FC 2860/3160/3560
FC 283/313
FC 3160/3560/4060
FC 313
FC 813*
FC 883*
FC 3525
FC 10030**
Conditioning **
Working Width
8'10"/10'2"/11'6"
9'2"/10'2"
10'2"/11'6"/13'
10'2"
26'7"
28'10"
11'6"
31' – 32'6"
Finger/Rubber Roller/ Steel Roller
PolyComb
Finger/Rubber Roller/Steel Roller
PolyComb/Rubber Roller
Rubber Roller
PolyComb
Finger
Finger
Red text in table denotes new product introduction for 2016
* The FC 813 & FC 883 require the use of the FC 313 front-mount machines.
**The FC 10030 requires the use of the FC 3525 front-mount machine.
Type
Side pull
Rear mounted
Center pivot
Front mounted
Rear mounted
Rear mounted
Front mounted
Rear mounted
Rotary
Tedders
Dry yyour hay faster
and harvest sooner
The tedder fluffs up the crop and allows us to drive
through the field at a really good speed. It also handles
all kinds of conditions, both the thick and the lighter
crops, and because we have a 30-foot tedder we
can cover a lot of ground in a short amount of time.
Steve Reinford, Pennsylvania
GF 8702 T GII Tedder
L to R: Brett, Chad, Steve and Drew Reinford
GF 10802 T GII
Rotary Tedder
Dry your hay faster and harvest sooner with Kuhn rotary tedders.
Our tedders provide efficient, uniform fluffing and smooth performance over irregular ground.
New trailed models provide fast, easy and safe transport with enhanced features to get you in and out
of the field faster for maximum efficiency. With more choices of trailed tedders than any manufacturer, we
have the tedder to meet your needs.
GF 13012 Rotary Tedder
HayBob Tedder/Rake Combination
Model
GF 222
GF 502
GF 5202
GF 6502
GF 7802
GF 7902
Working Width
8'6"
16'5"
17'1"
21'4"
25'7"
25'7"
Model
Red text in table denotes new product introduction for 2016
* Working width when tedding
GF 5202 Rotary Tedder
Working Width
GF 8702
GF 10802
GF 13012
GF 17012
HayBob 300/360
28'6"
35'5"
42'8"
56'5"
9'10"*
Wheel
Rakes
Providing the most value
Prov
for your equipment dollars
SR 110 GII
SpeedRake®
The Kuhn SpeedRake continues to raise the bar with unmatched reliability and performance in the wheel rake
market. With a continually growing product line and redesigned models, the best just keeps getting better. Along with the quality and simplicity
you have come to expect, our SpeedRake lines combine innovative features, advanced options and refined styling to provide the most value for
your equipment dollars.
SR 314 High-Capacity, Carted SpeedRake
SR 50 Carted SpeedRake
Model
SR 50-8
SR 50-10
SR 108 GII
SR 110 GII
SR 112 GII
SR 310
Working Width* Model
15'11"– 18'
17'7"– 21'4"
15'10" – 18'10"
16'11" – 21'2"
18'9" – 23'4"
20'10"
SR 312
SR 314
SR 612 GII
SR 614 GII
SR 616 GII
Red text in table denotes new product introduction for 2016
*Varies with crop conditions, includes windrow
Working Width*
24'2"
28'
25'
28'
31'
SR 616 GII High-Capacity SpeedRake
Rotary
Rakes
Produce fluffy, well-formed
Prod
windrows for faster drying
GA 8121 Twin-Rotor
Center-Delivery
Rake
Ryan Pearcy, Kuhn Product Manager
MM 700 Merge Maxx® Merger
Kuhn rotary rakes produce fluffy, well-formed windrows to help you dry your
hay faster. This allows you to harvest your crops at their peak nutritional value with less reliance on
the weather. Long, flexible tines touch the crop just once, lifting and depositing it neatly into the windrow.
The gentle raking action ensures that the leaves remain intact for maximum quality.
GA 4121 Single-Rotor, Side-Delivery Rake
Single-Rotor, Side-Delivery Twin-Rotor, Side-Delivery
Model** Working Width* Model** Working Width*
GA 300/3200/3201
GA 4121/4220/4221
GA 4321
GA 4521
10'6"
13'5"
13'9"
14'9"
GA 6002
GA 6632
GA 7932
GA 9032
GA 8030
GA 9030
11'6" – 19'
11'10" – 21'4"
13'3" – 25'1"
15'3" – 28'10"
23'11" – 27'3"
28'3"
The MM 700 fully
continuous twin merger
is unique in the industry,
and unmatched in its
durability and simplicity
of operation. It is ultraadaptable to your needs
and has up to 90%
of the capabilities
of a 30’ merger at a
substantially lower price.
GA 15131 Quad-Rotor, Center-Delivery Rake
Twin-Rotor,
Quad-Rotor,
Center-Delivery
Center-Delivery
Model** Working Width* Model** Working Width*
GA 6501
GA 7501
GA 8121
GA 8731
GA 9531
17'9" – 21'
22'5" – 24'5"
24'3" – 26'3"
25'3" – 28'2"
27'7" – 30'6"
GA 13131
GA 15131
27'6" – 41'
31'2" – 48'3"
Red text in table denotes new product introduction for 2016 *Varies with crop conditions, includes windrow **GA rotary rakes are available in trailed and mounted models
Windrow
Mergers
Gentle handling preserves delicate
Gent
forages for maximum feed value
MM 700 Merge Maxx®
Twin Merger
High-performance Kuhn mergers gently pick up the crop and deposit it onto the conveyor belt. This preserves
the delicate leaves of forages, such as alfalfa, for maximum feed value. Merging multiple windrows also maximizes your harvesting
efficiency, saving valuable time and fuel to grow your bottom line. Our redesigned triple merger raises the bar for productivity and
durability to better serve large acreage hay producers and custom operators! Now our all-new twin merger is setting the standard in its
category with a unique design and unmatched simplicity, durability and merging capabilities.
MM 300 Merge Maxx Single Merger
MM 902 Merge Maxx Triple Merger
MM 902 Windrow Merging Options
Model
Working Width*
MM 300
9'6" – 18'
MM 700
23'10" – 28'5"
MM 902
29'10" – 34'5"
Red text in table denotes new product introduction for 2016
*Varies with crop conditions, includes windrow
Round
Balers
The most
m efficient and reliable
balers on the market
The new VB 2200 series models
provide more than just a sleek,
new look. Upgraded features, such
as the exclusive new OptiFlow
intake option, provide enhanced
crop throughput compared to
standard open throat designs.
Rob Barger, Kuhn Product Manager
VB 2200 Series Round Balers
VB 2260 Round Baler
Unique innovations make a real difference in field performance, bale density and bale quality. Kuhn round balers continue to
OptiFlow
lead the industry with advanced features that provide outstanding performance
in the field. Our newest models feature the new OptiFlow, OptiFeed and OptiCut
intake options, providing you the opportunity to pick the machine to best match
your crops and conditions.
OptiFeed
VB 2265 Round Baler
Model
VB 2255 OptiFlow/OptiFeed
VB 2260 OptiFlow/OptiFeed/OptiCut 14
VB 2265 OptiCut 23
VB 2285 OptiFlow/OptiFeed
VB 2290 OptiFlow/OptiFeed/OptiCut 14
VB 2295 OptiCut 23
VBP 2265 OptiCut 14/OptiCut 23
OptiCut
Bale Size
4x5
4x5
4x5
4x6
4x6
4x6
4x5
Red text in table denotes new product introduction for 2016
Large Square
Balers
Produce consistent, dense,
Prod
square-edged bales
LSB 1290 D
Large
Square
Baler
Consistently filled, super-dense, square-edged bales are what every producer demands. Kuhn’s new double-knotter
large square balers meet and exceed these expectations, while combining high output and maximum reliability to get the job done fast. Our balers
feature the simplest drive system in the industry, fewest moving parts, heaviest standard flywheel and longest standard bale chamber to provide
outstanding durability and performance.
5
4
2
3
1
Crop is forced into the pre-chamber (1) by the integral rotor,
a feeder fork (2) pushes crop into a uniform flake. Once the
pre-chamber (3) is full, the feeder fork takes an extended
stroke that pushes the flake into the bale chamber (4), where
the plunger (5) compresses the crop to form a rock hard bale.
LSB 890 D Large Square Baler
Model
Bale Size
LSB 870 OptiFeed/OptiCut 15
LSB 890 D OptiFeed/OptiCut 15
LSB 1290 D OptiFeed/OptiCut 23
Red text in table denotes new product introduction for 2016
2x3
3x3
3x4
Bale
Wrappers
Maintain optimum forage quality
Mai
throughout storage
RW 1610
Round Bale Wrapper
The simplicity and the performance
of the equipment is great. We are
really satisfied with the quality of the
product,” says Mast. “The results that we
have gotten by sidedressing
our crops have been great.
Brent Mast, Illinois
Axis® 40.1 H-EMC-W Fertilizer Spreader
Every minute counts when weather conditions are uncertain. Wrap bales quickly and reliably with quality Kuhn RW round
bale wrappers and SW square bale wrappers. Computer controls, available on all models, maximize efficiency and performance. Our
groundbreaking new e-Twin models apply two layers of film at once to wrap bales in half the time of traditional models! Kuhn wrappers produce
consistent, high-quality wrapped bales to help maintain optimum forage quality throughout the storage period.
RW 1110 with Trailer Kit and Power Pack
Model
RW 1110/1410/1610 M/C*
RW 1110/1410/1610 M/C* e-Twin
Red text in table denotes new product introduction for 2016
* M= Manual Control C = Computer Control
Bale Size
4 x (3-5) round
4 x (3-5) round
SW 4014 Square Bale Wrapper
Model
Bale Size
SW 1114/1116 M/C* 2x3 or 3x3 up to 6’ long, up to 5x5 round
SW 4014
2x3, 3x3, 3x4 or 4x4 bales up to 6’6” long
Power TillageLand Maintenance
Inno
Innovative
tools to maximize
efficiency and increase yields
effi
Axis 50.1 H-EMC-W
Fertilizer Spreader
with New Trailer Cart
Premia 4000
Mechanical Grain Drill
Cutting-edge Kuhn fertilizer spreaders offer simple operation, precise
application adjustment and automated GPS control to minimize fertilizer costs and
maximize yields. We offer a broad range of power tillers and power harrows designed to perform in all types of soils and with all types of specialty
crops to help increase yields. The power tillers and harrows can be used alone or in combination with one of our mounted mechanical seed drills. In
addition, we have specialized mowers and shredders for the maintenance needs of municipalities, orchards, nurseries and vineyards.
EL 53 Power Tiller
Product Range
HR & HRB power harrows
EL power tillers
Premia grain drills
Shredders & offset mowers
Fertilizer spreaders
15 models, 4' – 20'
29 models, 3'2" – 15'
3 models, 9'10" – 13'1"
15 models, 3'2" – 7'
13 models, 17.5 – 141 cu. ft.
Red text in table denotes new product introduction for 2016
VKD 210 Shredder
Moldboard
Plows
Eric Schreur, Michigan
Vari-Master 153 Fully Mounted
Rollover Plow
Rugged plows for improved soil quality
Rug
and increased crop production
Vari-Leader
Semi-Mounted
Rollover Plow
It does a good job in various
soils – even our old river bottom
ground. It’s very nice. It’s easy to
work with and it’s very well built.
Modern, high-capacity Kuhn plows provide fast, efficient performance while helping preserve soil quality
and increase crop productivity. Recently introduced models offer improved strength and durability to match the power of today’s higher
horsepower tractors. Our conventional and rollover models offer multiple moldboard and bottom reset options for maximum versatility. With a
growing range of models available, you can choose the best setup to meet your needs.
Multi-Leader Semi-Mounted Rollover Plow
Product Range
Fully mounted rollover plows
Semi-mounted rollover plows
Semi-mounted conventional plows
Red text in table denotes new product introduction for 2016
41 models, 2-7 bottoms
38 models, 5-12 bottoms
8 models, 4-7 bottoms
Multi-Master 183 Fully Mounted Rollover Plow
Primary
Tillage
Promote residue breakdown and
Prom
allow excellent root development
Landsaver® 4810
Coulter Chisel
Kuhn Krause primary tillage tools promote the breakdown of
crop residue and allow excellent root development for the next crop.
These deep tillage tools break up compaction and aerate the soil allowing improved water
infiltration, while incorporating residue and providing a variety of field finishes. The all-new Landsaver 4810
coulter chisel features hydraulically controlled coulters, a completely redesigned K2000TM spring reset shank
option, and available Star WheelTM treaders for superior leveling and residue mixing.
Dominator® 4855 Primary Tillage System
Model
Dominator 4855
Landsaver 4810
4000 Chisel Plow
4830 In-Line Ripper
Red text in table denotes new product introduction for 2016
Working Width
10'6" – 19'6"
9'4" – 33'4"
17' – 39'
12'6" – 26'8"
4830 In-Line Ripper
Secondary
Tillage
Hubert Ragsdale, Arkansas
5635 Field Cultivator
Produce uniform seedbeds for
Prod
superior seed-to-soil contact
Design is everything
when it comes to farm
equipment, and by far,
this Kuhn Krause field
cultivator had the
best design. It had
all the features I
thought it should have.
Excalibur® Blade
Landsman® 6205
Combination
Soil Finisher
Kuhn Krause secondary tillage tools deliver excellent residue flow handling capability,
soil mixing, conditioning and leveling in one pass. For over three decades the Kuhn Krause Landsman
6205 and LandstarTM 6405 soil finishers have led the combination secondary tillage market. The newly redesigned models feature heavy-duty
components for enhanced durability and also incorporate the exclusive Excalibur blade for superior soil penetration and more consistent residue
cutting action. Combined with a variety of 24/7® leveling systems, these tools provide uniform seedbeds and superior seed-to-soil contact.
5635 Field Cultivator
Model
Working Width
Landsman 6205
Landstar 6405
5635 Field Cultivator
18' – 45'
18' – 36’
20'6" – 50'6"
Landstar 6405 Combination Soil Finisher
Disc
Harrows
Excellent residue cutting
Exce
and seedbed preparation
8210 Class II
Tandem Disc Harrow
Kuhn Krause offers a growing line of disc harrows that provide excellent residue cutting and seedbed preparation
to help ensure proper soil management. Residue Razor® disc blades combined with an excellent weight-to-blade ratio provide consistent
soil penetration in a variety of conditions. Large models maximize efficiency and advanced features decrease maintenance and improve service
life. New Kuhn Optimer+® compact discs provide efficient single-pass residue management with excellent weed removal, trash burying
and field leveling to create a high-quality seedbed.
8310 Class II Tandem Disc Harrow
Model
5800 Offset Disc Harrow
7300 Class I Tandem Disc Harrow
8100 Class I Tandem Disc Harrow
8210 Class II Tandem Disc Harrow
8310 Class III Tandem Disc Harrow
Working Width
12'3" – 20'2"
18'1" – 34'1"
12'3" – 18'1"
18'10" – 44'3"
19'10" – 37'3"
Optimer+ Compact Disc
Model
Optimer+ Compact Disc (mounted)
Optimer+ Compact Disc (trailed)
Working Width
9'10" and 13'1"
13'1" – 24'7"
Strip
Till
Brandon Knutson
– The DeLong Company, Wisconsin
Gladiator 1200-1630
Precision nutrient and
Prec
seedbed management
For a commercial
operation, we test them
to their limits, covering
quite a few thousand
acres, and so far they
have both held up
well and we are
very happy
with them.
Gladiator® 1200
Strip Tillage System
Gladiator 1205M 3-Point Mounted
The Kuhn Krause Gladiator Strip Tillage System offers
on-row conservation tillage, precise nutrient placement
and non-stop seedbed conditioning to help progressive producers manage input costs. The innovative fixed-frame toolbar and
ST-PROTM Row Unit
ST-PRO row units are easy to adjust and require no daily maintenance. They
contour to ground surface conditions allowing the shanks to consistently
operate at your pre-determined depth. This is more than just strip-till, it
is precision nutrient and seedbed management.
Model
Gladiator 1205M (mounted)
Gladiator 1200 (trailed)
24-Row Strip-Till
Gladiator Strip Tillage System
Red text in table denotes new product introduction for 2016
Working Width
9'2" – 40'
20' – 40'
60'
Vertical
Tillage
Delivers high-speed
Deli
residue cutting and soil mixing
Excelerator® 8000
Vertical Tillage System –
50' model
The Kuhn Krause Excelerator delivers high-speed residue cutting and soil mixing,
Excalibur® Blade
incorporating many tillage techniques in a single pass with working widths ranging from 14'-50'.
With the exclusive Excalibur blades and Star WheelTM treaders, this vertical tillage system does an
excellent job of cutting residue, leveling soil, downsizing clods and anchoring residue, while the 24/7®
Soil Conditioning Reel finishes the operation – for fall conditions or spring seedbed preparation.
Excelerator –
Adjustable Gang Angle
Excelerator 8000 Vertical Tillage System
Model
Excelerator 8000
Working Width
14' – 50'
Mechanical
Grain Drills
Precise seed placement for consistent
Prec
seed-to-soil contact and uniform emergence
Allen Einsphar, Colorado
5200 Folding Grain Drill
I simply am happy with the way
it works. I like the way the wheat and
millet comes up behind it, the
ease of using it and setting it up.
5200 PRO System
Grain Drill
Kuhn Krause mechanical grain drills deliver excellent seed placement in conventional, minimum-till and no-till
conditions. Specially designed PRO openers deliver seed and fertilizer at precise depths to ensure consistent seed-to-soil contact for an increased
germination rate and uniform emergence. Folding capabilities and assorted mounting configurations offer excellent transport dimensions, providing a
machine to meet the needs of any operation.
PRO – Precision Residue Opener
HR PRO – High-Residue Precision Opener
5200NT No-Till Grain Drill
Model
5200 Grain Drill (mounted)
5200 Grain Drill (trailed, folding)
5200NT No-Till Grain Drill (trailed)
Working Width
15' and 20'
25' – 36'
10' – 20'
Seedbed
Packers
Provides an ideal seedbed with
Prov
uniform density soil characteristics
4400 Packer
with Flex-Wing
Kuhn Krause packers utilize optional large notched rollers or
“V” packer wheels made of ductile cast iron that downsize clods
and uniformly firm the seedbed across the width of the machine.
“V” Packer Option
This provides an ideal seedbed that has uniform density soil characteristics and
sets the stage for good seed-to-soil contact.
4400 Packer with Flex-Wing
Model
4400 Packer
Working Width
12' – 46'
4400 Packer with Walking Duals
Vertical
Mixers
Process and mix the widest
Proc
variety of feedstuffs
VSL 250
Vertical Maxx®
Single-Auger
Low-Profile
Mixer
Aaron Abraham, Kuhn Product Manager
VSL 200 Series Vertical Maxx Mixers
The new VSL 200 Series incorporates
a redesigned auger for superior mixing
performance. Upgraded conveyor
discharge options provide enhanced
durability and flexible feeding,
while the additional side and
rear door options offer
versatility to fit your needs.
With many new and redesigned models in recent years, Kuhn Knight single- and twin-auger vertical mixers have
taken a step forward in mixing performance. Our vertical mixers process and mix the widest variety of feedstuffs, including round bales,
providing ration versatility. Improved feed movement provides a fast, complete mix for a fluffy and palatable ration. With a growing range of models and
sizes we have a vertical mixer to meet the needs of your operation.
VT 156 Vertical Maxx Twin-Auger Mixer
with New 8’ Belt Conveyor Option
VTC 1100 Vertical Maxx Twin-Auger
Commercial Mixer
Single-Auger Models Capacity*
Twin-Auger Models Capacity*
Twin-Auger Models Capacity*
Vertical Maxx 5127
310 cu. ft.
Vertical Maxx 5135
400 cu. ft.
Vertical Maxx 5143
480 cu. ft.
Vertical Maxx VSL 242 470 cu. ft.
Vertical Maxx VSL 250 550 cu. ft.
Vertical Maxx VT 132
Vertical Maxx VT 144
Vertical Maxx VT 156
Vertical Maxx VT 168
Vertical Maxx VT 180
Vertical Maxx VT 1100
Vertical Maxx VTC 180
Vertical Maxx VTC 1100
Vertical Maxx VTC 1120
Red text in table denotes new product introduction for 2016 *Capacity with optional extensions
360 cu. ft.
495 cu. ft.
630 cu. ft.
760 cu. ft.
880 cu. ft.
1,100 cu. ft.
880 cu. ft.
1,100 cu. ft.
1,320 cu. ft.
Mixers and
Feeders
Fast, thorough mixing for maximum
efficiency and productivity
BTC 190 Botec®
4-Auger Mixer
Kuhn Knight reel and 4-auger mixers help mix cost-effective rations
using a wide variety of economical feedstuffs. Cost-effective rations mean
Revolutionary Helix Reel
higher profitability for any operation. These quality machines provide fast, thorough mixing
with low horsepower requirements to further maximize your efficiency and productivity.
The new BTC Series provides enhanced reliability with upgraded auger drives.
Discharge options have also been redesigned for fast, even feeding.
Primor 4270 M Bale Processor (5’ Bale Capacity)
RA 142 Reel Auggie® Mixer
Model
Reel Auggie® 3115
Reel Auggie 3120
Reel Auggie 3125
Reel Auggie 3130
Reel Auggie RA 136
Reel Auggie RA 142
Reel Commercial RC250
Reel Commercial RC260
Reel Commercial RC270
Reel Commercial RC295
Capacity
147 cu. ft.
216 cu. ft.
250 cu. ft.
300 cu. ft.
360 cu. ft.
420 cu. ft.
500cu. ft.
600cu. ft.
700cu.ft.
950cu. ft.
Red text in table denotes new product introduction for 2016
Model
Capacity
Botec 4-Auger 4136
360 cu. ft.
Botec 4-Auger 4142
420 cu. ft.
Botec 4-Auger BTC155 550 cu.ft.
Botec 4-Auger BTC163 630 cu.ft.
Botec 4-Auger BTC172 720 cu.ft.
Botec 4-Auger BTC190 900 cu.ft.
ProFeed 70110
1,100 cu. ft.
Primor 2060 M
76 cu. ft.
Primor 4270 M
148 cu. ft.
70110 ProFeed® Delivery Box
Side Discharge
Spreaders
Spread the widest
Spre
variety of materials
SLC 150
ProTwin® Slinger® Commercial
Stuart Meier, Wisconsin
SLC 141 Slinger Manure Spreader
The most improved feature of
the new model is that there is no
longer a chain and chain case in
the rear, only a cover to protect
the bearings. We also like the
size and the way it
handles the material.
The Kuhn Knight ProTwin Slinger spreads the widest variety of materials, from solids to slurry. The new SLC 100
Series incorporates all drive components in a fully enclosed front oil bath for low maintenance and long life. These models feature a completely
redesigned discharge that provides faster unloading, improved material breakup and more consistent, even spreading. This accurate application
will help you utilize the nutrient value of manure and reduce purchased fertilizer costs.
SLC 132 ProTwin Slinger Commercial
Model
ProTwin Slinger 8110
ProTwin Slinger 8114
ProTwin Slinger 8118
ProTwin Slinger 8124
Capacity
1008 gal.
1426 gal.
1818 gal.
2417 gal.
Model
ProTwin Slinger SLC 126
ProTwin Slinger SLC 132
ProTwin Slinger SLC 141
ProTwin Slinger SLC 150
Capacity
2,600 gal.
3,200 gal.
4,100 gal.
5,000 gal.
8124 ProTwin Slinger
Box
Spreaders
Outstanding reliability
Outs
and spreading performance
PSC 161 ProSpread®
Commercial with
VertiSpread® Beaters
Kuhn Knight apron and push-type box spreaders are
ideal for spreading all types of solid materials. These
high-quality machines set the standard for reliability and spreading
performance. VertiSpread vertical beaters provide a wide and consistent
spread pattern to maximize the nutrient value of manure. AccuSpread®
spinner beaters on the PS 160 and PSC models offer an even more
uniform, controlled spread of flowable materials.
Optional NT 460 Scale
System – track and
record applied nutrients
NT 8000i Controlled
Spread Monitor – precise
spreading rate control
Available on select models
Available on select models
PS 160 ProSpread with AccuSpread Spinner Discharge
2054 ProPush® with VertiSpread Beaters
Model
Heaped Capacity
EasySpread® 1212
EasySpread 1215
EasySpread 1219
EasySpread 1224
EasySpread 1230
ProSpread 1130
ProSpread 1140
117 cu. ft.
146 cu. ft.
189 cu. ft.
240 cu. ft.
295 cu. ft.
320 cu. ft.
380 cu. ft.
Model
Heaped Capacity
ProSpread PS 150
ProSpread PS 160
ProSpread PSC 161
ProSpread PSC 171
ProSpread PSC 181
ProPush 2044
ProPush 2054
500 cu. ft.
600 cu. ft.
610 cu. ft.
710 cu. ft.
810 cu. ft.
440 cu. ft.
540 cu. ft.
PEOPLE
PRODUCTS
SERVICE
SUPPORT
At Kuhn North America, we focus on quality in everything we do. Our skilled and talented people work hard to make sure the products, services, and
support we provide are the best. Our dependable PRODUCTS are designed with the customer in mind. Our commitment to SERVICE is backed up by
our six distribution centers across North America. Our SUPPORT comes not only from Kuhn North America, but our dedicated dealer network in every
state and province. Our most important resource, PEOPLE are dedicated to service and support the products that help our customers in their business.
Invest in Quality and experience the Kuhn difference.
See Your Local Dealer
Kuhn North America, Inc
1501 West Seventh Avenue
PO Box 167
Brodhead, WI 53520 USA
Phone: 608-897-2131
Fax: 608-897-2561
www.KuhnNorthAmerica.com
Kuhn Krause, Inc.
305 S. Monroe St.
PO Box 2707
Hutchinson, KS 67504 USA
Phone: 620-663-6161
Fax: 620-662-5903
Retail Financing Is Available. Ask Your Dealer For Details.
706241US In the interest of progress, we reserve the right to change specifications, equipment design or material without notice.
©Kuhn North America, Inc. December 2015