Motor Control Brochure - North American Electric

advertisement
Your source for a complete line of electric motors and controls Motor Control Program MISSION STATEMENT To provide the United States market for industrial motors and controls with products which meet or exceed customer expectations for quality, performance, and reliability at the lowest possible cost and delivered in accordance with the customer’s schedule, through our authorized distributor network. COMPANY HISTORY North American Electric, Inc. is a wholesale supplier of Special Purpose and General Purpose, AC Electric motors and controls. We take pride in supplying high performance, high quality products at extremely competitive prices throughout the United States. Donald E. Hackman, Sr. and David E. Hackman founded the company in October of 1993. The company’s primary focus is sourcing quality electric motors from various manufacturers, both locally and internationally, and distributing them throughout the United States through local distributors and service centers. Our nationwide distributor and service network offer strong local support for our products by providing critical logistical, technical and maintenance support as well as fast, friendly customer service. WARRANTY POLICY All NASD Series Reduced Voltage Solid State Starters (Soft Starters) will be warranted to be free from defects in material and workmanship for a period of 5 years. This warranty includes SCRs. All Full Voltage ATL Starters will be warranted to be free from defects in material and workmanship for a period of 2 years. All Part Wind Starters will be warranted to be free from defects in material and workmanship for a period of 2 years. North American Electric’s liability under this warranty or any other warranty, expressed or implied, in law or fact, shall be limited to the replacement of the control unit, and in no event shall North American Electric, Inc. be liable for consequential or indirect damages, including freight. For more information about warranty policies and procedures please contact our customer service department at (800) 884‐0404, visit our website at www.naemtors.com or send us an email at sales@naemotors.com.
Toll Free: 800-884-0404 • www.naemotors.com • e-mail: sales@naemotors.com
“Your Source for a Complete Line of Electric Motors, Controls and Shaft Mount Reducers”
NEMA PREMIUM EFFICIENCY
INVERTER DUTY MOTORS
Meets Or Exceeds NEMA Premium
Efficiency Levels Qualify For
Energy Efficiency Rebates
PREMIUM CRUSHER DESIGN MOTORS
1–600 HP; 4,6,8 Pole
NEMA Design C High Strength 4140 Grade
Stainless Steel Shaft
586/7U and UZ Frame Heavy Duty Cast Iron
Construction (Including Fan Cover)
Bearing Sizes: DE=NU324 ODE=6324
NEMA PREMIUM EFFICIENCY
ROUND BODY MOTOR
1–30 HP; 1800 RPM
C - Face Without Feet
SINGLE PHASE, 56C FRAME, TEFC
1/3–2 HP; 2,4 Pole
High Starting Torques
Manual Overload Protection (Optional)
Capacitor Start / Capacitor Run Design
Rolled Steel Frame Construction IP55
Protection-Removable Feet
SINGLE PHASE, FARM DUTY, TEFC
1/3–10 HP; 4 Pole
High Starting Torques
Manual overload Protection (1/3 Thru 5 HP)
Capacitor Start / Capacitor Run Design
Rolled Steel Frames Cast Iron Endbells
SINGLE PHASE OPEN DRIPPROOF
3,5 HP; 4 Pole
High Starting Torques
Capacitor Start / Capacitor Run Design
Rolled Steel Frame Construction
Cast Iron Endbells
THREE PHASE, 56C FRAME, TEFC
1/3–3 HP; 2,4 POLE
High Efficiency Design
General Purpose Motors
Rolled Steel Frame Construction,
Aluminum Endbells
IP55 Protection Removable Feet
575V Available
THREE PHASE, TEFC
ROLLED STEEL MOTORS
1–10 HP; 2,4 Pole
High Efficiency Design-General Purpose
Light Weight Rolled Steel Frame
THREE PHASE OPEN DRIPPROOF
1–20 HP; 2,4,6 Pole
High Efficiency Design General
Purpose Motors
Rolled Steel Frame Construction,
Cast Iron Endbells
STAINLESS STEEL
WASHDOWN DUTY MOTORS
1/3 - 20 HP 2,4,6 Pole
IP 66 Protection
Inverter Duty
CLOSE COUPLED
PUMP MOTORS
1-50 HP; Cast Iron
High Efficiency
Corrosion Resistant Paint
PREMIUM EFFICIENCY
EXPLOSION PROOF MOTORS
1–300 HP; 2,4,6 Pole
All Motors Meet Or Exceed UL 674 Specification
As Required By OSHA For Installation And Use
In Hazardous Locations.
Class I, Division I, Groups C&D And
Class II, Division I, Groups E,F And G
UL Certified - File E228654
CSA + “C” + “US” - Canadian Standard ISO9001
OIL WELL PUMP MOTORS, TEFC
3–150 HP; 6 Pole
NEMA Design D High Slip(5% To 8% Slip)
Special Purpose Oil Well Pump Motors
Heavy Duty Cast Iron Frame Construction
OIL WELL PUMP MOTORS, ODP
7.5–50 HP; 6 Pole
NEMA Design D High Slip(5% To 8% Slip)
Special Purpose Oil Well Pump Motors
Heavy Duty Cast Iron Frame Construction
VERTICAL HOLLOW SHAFT
PUMP MOTORS
HIGH EFFICENCY AND
STANDARD EFFICIENCY
10 – 500 HP; 4 Pole
High Torque - High Thrust
ROTARY UNIT FOR
ROTARY PHASE CONVERTER
3–60 HP; 4 Pole
For Use With Rotary Phase Converters
To Run Three Phase Equipment From
Single Phase Power
High Efficiency Design, Heavy Duty Cast
Iron Construction, TEFC
SHAFT MOUNT REDUCERS
& ACCESSORIES
Sizes 2-10
Gear Ratios: 15:1 & 25:1
Screw Conveyor Adapters Now Available
Repair Kits Also Available
ELECTRIC MOTOR CONTROL
Full Voltage Starters
Soft Starters
VFDs
Part Wind / WYE - Delta Starters
MOTOR SLIDE BASES
Available 56C Through 505U
Toll Free: 800-884-0404 • www.naemotors.com • e-mail: sales@naemotors.com
11
FULL VOLTAGE STARTERS
ATL SERIES
North American Electric, Inc. ATL Series starters are available as ATLF (Fused
disconnect), ATLB (molded case circuit Breaker) or ATLM (Manual motor starter).
● NEMA 3R enclosed for both indoor as well as outdoor duty
● Fused, Circuit Breaker or Manual Disconnect
● ATLF and ATLB Series are UL Listed for use as Service Equipment (see notes below)
● Hand-Off-Auto Selector Switch
● ATLF and ATLB Series feature Start / Stop / Reset Pushbuttons (See Notes below)
● Fuses supplied with Fused type disconnect
Notes:
1.) ATLM Series is not rated for service entrance
2.) ATLM Series is not available with reset pushbutton
2
Toll Free: 800-884-0404 • www.naemotors.com • e-mail: sales@naemotors.com
ATLF - Across The Line, Fused, Service Entrance Rated
Catalog Number
HP
NA-ATLF-15HP-460-SER
15
NA-ATLF-20HP-460-SER
20
Catalog Number
HP
NA-ATLF-25HP-460-SER
25
NA-ATLF-10HP-460-SER
10
NA-ATLF-30HP-460-SER
NA-ATLF-15HP-460-SER 30 15
NA-ATLF-40HP-460-SER
NA-ATLF-20HP-460-SER 40 20
NA-ATLF-50HP-460-SER
NA-ATLF-25HP-460-SER 50 25
NA-ATLF-60HP-460-SER
NA-ATLF-30HP-460-SER 60 30
NA-ATLF-40HP-460-SER
NA-ATLF-50HP-460-SER
NA-ATLF-60HP-460-SER
Fuses Included
Stocked, Ready to Ship
40
50
60
Description
Dimensions List Price
480VAC
15HP
ATL
Starter
Panel
W/
Switch
Disconnect
and
Fuses
20x16x8
$1,110.00
ATLF - Across The Line, Fused, Service Entrance Rated
480VAC 20HP ATL Starter Panel W/ Switch Disconnect and Fuses
20x16x8
$1,250.00
Description
Dimensions List Price
480VAC 25HP ATL Starter Panel W/ Switch Disconnect and Fuses
20x16x8
$1,250.00
480VAC 10HP ATL Starter Panel W/ Switch Disconnect and Fuses
20x16x8
$1,110.00
480VAC
30HP
ATL
Starter
Panel
W/
Switch
Disconnect
and
Fuses
20x16x8
$1,310.00
480VAC 15HP ATL Starter Panel W/ Switch Disconnect and Fuses
20x16x8
$1,110.00
480VAC
PanelW/
W/Switch
Switch
Disconnect
Fuses 20x16x8
24x20x8
$1,450.00
480VAC40HP
20HPATL
ATL Starter
Starter Panel
Disconnect
andand
Fuses
$1,250.00
480VAC
PanelW/
W/Switch
Switch
Disconnect
Fuses 20x16x8
24x20x8
$1,770.00
480VAC50HP
25HPATL
ATL Starter
Starter Panel
Disconnect
andand
Fuses
$1,250.00
480VAC
HP ATL
PanelW/
W/Switch
Switch
Disconnect
Fuses 20x16x8
24x20x8
$1,780.00
480VAC60
30HP
ATL Starter
Starter Panel
Disconnect
andand
Fuses
$1,310.00
480VAC 40HP ATL Starter Panel W/ Switch Disconnect and Fuses
480VAC 50HP ATL Starter Panel W/ Switch Disconnect and Fuses
480VAC 60HP ATL Starter Panel W/ Switch Disconnect and Fuses
24x20x8
24x20x8
24x20x8
$1,450.00
$1,770.00
$1,780.00
Fuses Included
Stocked, Ready to Ship
ATLF
ATLFWiring
WiringSchematic
Schematic
Toll Free: 800-884-0404 • www.naemotors.com • e-mail: sales@naemotors.com
3
ATLB - Across The Line, Breaker, Service Entrance Rated
Catalog Number
NA-ATLB-15HP-460-SER
NA-ATLB-20HP-460-SER
NA-ATLB-25HP-460-SER
NA-ATLB-30HP-460-SER
NA-ATLB-40HP-460-SER
NA-ATLB-50HP-460-SER
NA-ATLB-60HP-460-SER
NA-ATLB-75HP-460-SER
HP
15
20
25
30
40
50
60
75
Description
480VAC 15HP ATL Starter Panel W/ Circuit Breaker
480VAC 20HP ATL Starter Panel W/ Circuit Breaker
480VAC 25HP ATL Starter Panel W/ Circuit Breaker
480VAC 30HP ATL Starter Panel W/ Circuit Breaker
480VAC 40HP ATL Starter Panel W/ Circuit Breaker
480VAC 50HP ATL Starter Panel W/ Circuit Breaker
480VAC 60HP ATL Starter Panel W/ Circuit Breaker
480VAC 75HP ATL Starter Panel W/ Circuit Breaker
Dimensions
16x12x8
16x12x8
16x12x8
16x12x8
16x12x8
20x16x8
20x16x8
20x16x8
List Price
$1,230.00
$1,310.00
$1,310.00
$1,390.00
$1,390.00
$1,690.00
$1,770.00
$2,150.00
Stocked, Ready to Ship
ATLB Wiring Schematic
44
Toll
Toll Free:
Free: 800-884-0404
800-884-0404 •• www.naemotors.com
www.naemotors.com •• e-mail:
e-mail: sales@naemotors.com
sales@naemotors.com
Catalog Number
Catalog Number
NA-ATLM-15HP-460
NA-ATLM-15HP-460-SER
NA-ATLM-20HP-460
NA-ATLM-20HP-460-SER
NA-ATLM-25HP-460
NA-ATLM-25HP-460-SER
NA-ATLM-30HP-460
NA-ATLM-30HP-460-SER
NA-ATLM-40HP-460
NA-ATLM-40HP-460-SER
NA-ATLM-50HP-460
NA-ATLM-50HP-460-SER
NA-ATLM-60HP-460
NA-ATLM-60HP-460-SER
NA-ATLM-75HP-460
ATLM - Manual Motor Starter, Non - Service Entrance Rated
ATLM - Manual Motor Starter, Non - Service Entrance Rated
HP
Description
HP
Description
15
480VAC 15HP ATL Starter
Panel W/ MMS Disconnect
15
480VAC
15HP
ATL
Starter
PanelW/
W/MMS
MMSDisconnect
Disconnect
20
480VAC 20HP ATL Starter Panel
20
480VAC25HP
20HPATL
ATLStarter
StarterPanel
PanelW/
W/MMS
MMSDisconnect
Disconnect
25
480VAC
25
480VAC30HP
25HPATL
ATLStarter
StarterPanel
PanelW/
W/MMS
MMSDisconnect
Disconnect
30
480VAC
30
480VAC
30HP
ATL
Starter
Panel
W/
MMS
Disconnect
40
480VAC 40HP ATL Starter Panel W/ MMS Disconnect
40
480VAC50HP
40HPATL
ATLStarter
StarterPanel
PanelW/
W/MMS
MMSDisconnect
Disconnect
50
480VAC
50
480VAC60HP
50HPATL
ATLStarter
StarterPanel
PanelW/
W/MMS
MMSDisconnect
Disconnect
60
480VAC
60
480VAC75HP
60HPATL
ATLStarter
StarterPanel
PanelW/
W/MMS
MMSDisconnect
Disconnect
75
480VAC
Dimensions
Dimensions
16x12x8
16x12x8
16x12x8
16x12x8
16x12x8
16x12x8
16x12x8
16x12x8
16x12x8
16x12x8
24x20x12
24x20x12
24x20x12
24x20x12
24x20x14
List Price
List
Price
$730.00
$730.00
$760.00
$760.00
$880.00
$880.00
$1,210.00
$1,210.00
$1,230.00
$1,230.00
$1,590.00
$1,590.00
$1,620.00
$1,620.00
$1,760.00
Stocked, Ready to Ship
ATLM Wiring Schematic
Toll Free: 800-884-0404 • www.naemotors.com • e-mail: sales@naemotors.com
5
Part Winding Starters
PWS Series
North American Electric, Inc. PWS Series starters consist of two ATL starters and a timer.
The first starter is used to connect one winding of a part wound type motor across the line,
which will require approximately 50% of the starting current than starting a typical motor
across the line. The second starter will come on after a timed delay so that the motor will
be capable of handling its full rated load.
• NEMA 3R enclosed for both indoor as well as outdoor duty
• Circuit Breaker or Fused Disconnect Switch
• UL Listed for use as Service Equipment
• Hand-Off-Auto Selector Switch
• Start / Stop Pushbuttons
• Reset Pushbutton for each starter
• Fuses supplied with fused type disconnect
Part Wind Starter Panels with Fusible Disconnect
Catalog Number
NA-PWSF-30HP-460V-SER
NA-PWSF-40HP-460V-SER
NA-PWSF-50HP-460V-SER
NA-PWSF-60HP-460V-SER
NA-PWSF-75HP-460V-SER
NA-PWSF-100HP-460V-SER
NA-PWSF-125HP-460V-SER
NA-PWSF-150HP-460V-SER
HP
30
40
50
60
75
100
125
150
Description
30HP, NEMA 3R Enclosed, Fusible Disconnect
40HP, NEMA 3R Enclosed, Fusible Disconnect
50HP, NEMA 3R Enclosed, Fusible Disconnect
60HP, NEMA 3R Enclosed, Fusible Disconnect
75HP, NEMA 3R Enclosed, Fusible Disconnect
100HP, NEMA 3R Enclosed, Fusible Disconnect
125HP, NEMA 3R Enclosed, Fusible Disconnect
150HP, NEMA 3R Enclosed, Fusible Disconnect
List Price
$ 2,189.00
$ 2,453.00
$ 2,471.00
$ 2,913.00
$ 3,620.00
$ 4,260.00
$ 5,414.00
$ 7,062.00
Part Wind Starter Panels with Combination Circuit Breaker
Catalog Number
NA-PWSB-30HP-460V-SER
NA-PWSB-40HP-460V-SER
NA-PWSB-50HP-460V-SER
NA-PWSB-60HP-460V-SER
NA-PWSB-75HP-460V-SER
NA-PWSB-100HP-460V-SER
NA-PWSB-125HP-460V-SER
NA-PWSB-150HP-460V-SER
6
HP
30
40
50
60
75
100
125
150
Description
30HP, NEMA 3R Enclosed, Circuit Breaker
40HP, NEMA 3R Enclosed, Circuit Breaker
50HP, NEMA 3R Enclosed, Circuit Breaker
60HP, NEMA 3R Enclosed, Circuit Breaker
75HP, NEMA 3R Enclosed, Circuit Breaker
100HP, NEMA 3R Enclosed, Circuit Breaker
125HP, NEMA 3R Enclosed, Circuit Breaker
150HP, NEMA 3R Enclosed, Circuit Breaker
List Price
$ 2,158.00
$ 2,229.00
$ 2,282.00
$ 2,530.00
$ 3,008.00
$ 3,556.00
$ 3,751.00
$ 4,795.00
Toll Free: 800-884-0404 • www.naemotors.com • e-mail: sales@naemotors.com
N A S D SERIES
3Ø, 460VAC, 60 - 600HP
Full HP rated Starter Bypass
5-Year Warranty
( Including SCRs )
SEVERE DUTY
SOFT-STARTER
NEMA
5- Year Warranty
including SCR's
The Complete Package
The NASD series of soft starters has been designed for the customer who needs something easy to obtain,
easy to install, easy to program, easy to budget, able to stand the test of time. NAE carries inventory of these
units in the most popular HP ranges in multiple warehouses so that whenever you need a soft starter, you
can get one quickly. In most cases, we will be able to ship the same day as ordered. The NASD comes as a
complete package and even includes the lugs so that all that should be required for most installations is
connecting input and output cables. The keypad display allows you to program and monitor in simple
English text. That means no codes to look up or remember. Available as NEMA-4 or 4X outdoor duty rated
enclosure with a protective cover for the keypad display along with NEMA-4X rated pilot devices. We at NAE
realize that even the best made product needs a rainy day plan so when that day comes, and if Murphy has
anything to do with it that day will usually come on 3rd shift, you have the capability of simply switching from
soft start to ATL mode to keep production going until the problem can be fixed. The fact that the NASD has
only two boards and that the control board is the same throughout the entire series doesn’t hurt either. We
do these things so that you can have peace of mind, regardless of how demanding your operating
conditions might be.
Integrated Electronic Motor Protection
50% overload for 30 seconds, 115% con
tinuous
Wide range class 10-30 electronic
overload Protective features include phase
loss detection, phase insensitivity, shearpin detection, and heat-sink overtemp.
Industrial Grade Construction
NEMA Type 4 or 4X outdoor rating
Protective cover for keypad display
NEMA 4X Pilot devices
120V control power for field devices
Full HP rated contactor bypass with separate
overload for emergency starting purposes
Soft Start Features
Adjustable current limit, Ramp up time,

Ramp
down time,
SCR over-temperature detection
Shorted SCR detection
Jog speed
Programmable Control Features
120VAC control inputs for remote control
Dry contact relay outputs for remote
monitoring
Analog input & output
All I/O wired to terminal strip to ease
remote access
Circuit Breaker Disconnect
Circuit Breaker disconnect
provides branch and short circuit
protection
No fuses required – saves time
and money
Door-Mounted Keypad Display
Control and protective functions
are easily accessed
LED indication for ready, run, &
fault
Lockable handle for safety
Toll Free: 800-884-0404 • www.naemotors.com • e-mail: sales@naemotors.com
7
TYPICAL WIRING DIAGRAM
ORDERING INFORMATION
8
Model No.
FLA
NASD-60-4-N4-CB
NASD-75-4-N4-CB
NASD-100-4-N4-CB
NASD-125-4-N4-CB
NASD-150-4-N4-CB
NASD-200-4-N4-CB
NASD-250-4-N4-CB
NASD-300-4-N4-CB
NASD-350-4-N4-CB
NASD-400-4-N4-CB
NASD-500-4-N4-CB
NASD-600-4-N4-CB
80
100
125
160
200
250
300
360
420
500
600
800
HP
460VAC
60
75
100
125
150
200
250
300
350
400
500
600
DIMENSIONS
H
W
D
30
36
36
36
36
36
42
42
42
48
48
60
24
30
30
30
30
30
36
36
36
36
36
48
12
12
12
12
12
12
12
12
12
16
16
16
List Price
$5,660.00
$5,860.00
$6,770.00
$7,060.00
$8,030.00
$9,570.00
$10,290.00
$11,650.00
$13,310.00
$15,550.00
$20,100.00
$23,210.00
Toll Free: 800-884-0404 • www.naemotors.com • e-mail: sales@naemotors.com
NASD Soft Starter Cont'd
SPECIFICATIONS
Starter Type
Combination Soft Starter
NEMA 4 Enclosed or NEMA 4X Enclosed
User Interface
NASD Soft Starter Cont'd
SPECIFICATIONS
Keypad Display with LED indication for power, run,
and fault – HOA selector switch – start/stop/reset pushbuttons Standard
Control
Operations
Starter Type
Inputs
Combination Soft Starter
Discrete 120VAC, 2ma
NEMA 4 Enclosed or NEMA 4X Enclosed
Analog
0-10VDC
User
Interface
Outputs
Keypad Display with LEDDiscrete
indicationRelay
for power,
run,rated
and .2A@120VAC
fault – HOA selector switch – start/stop/reset pushbuttons contacts
Standard Control Operations
Bypass
Relay contacts rated 5A@120VAC
Inputs
Analog 0-5VDC , 5ma Max
Discrete
120VAC, 2ma
Operational
Analog
0-10VDC
Starts
6/hour,
30 seconds max start time @ 500%FLA
Outputs
Overload Type Electronic, 12t trip curve
Discrete Relay contacts rated .2A@120VAC
Jog
Slow
speed
Operation
approximately 14% of Base Speed
Bypass
Relay
contacts
rated 5A@120VAC
Environmental
Analog 0-5VDC , 5ma Max
Surrounding Air Operating Temp 32° to 104° F (0° to 40° C)
Operational
30 seconds
max start time @ 500%FLA
Relative Starts
Humidity 6/hour,
5% to 95%
non-condensing
Overload
Type
Electronic,
12t trip curveRange
Soft Starter / Motor
/ Pump
Protection
Programmable
Current Setting Range
Differs per model
Jog
Slow speed Operation approximately 14% of Base Speed
Environmental
Instantaneous Over Current Always Enabled Indicates Current has reached 1000% of
Surrounding Air Operating Temp stack
32° tosize
104° F (0° to 40° C)
Trip Class Class 10, 15, 20,or 30
RelativeShear-pin
Humidity Enabled/
5% to 95%
non-condensing
Disabled
- Automatically disabled when in Jog
Soft Starter / Motor / Pump Protection
Programmable
Range
Current Overload Level Mode
Always Enabled when 100% will trip on Motor Overload
Current Setting Range
Differs
per
model
Fault
Phase
Loss
Instantaneous Over
Current
Phase Sequence
Shorted
SCR
Trip Class
Always Enabled
Enabled Indicates Current has reached 1000% of
Always
Phase
Insensitive
stack size
Always
enabled
only
Class
10,
15, 20,or
30checks for shorted SCR when Start or
Jog is initiated
Shear-pin Enabled/ Disabled - Automatically disabled when in Jog
Heatsink Over-Temperature Mode
Always On: Trips if heatsink reaches approximately 185°F
Current Overload Level Always Enabled when 100% will trip on Motor Overload
(85°C)
Fault
Emergency Across-The-Line Start Switch selectable RVS-Off-ATL
Phase Loss Always Enabled
Phase Sequence Phase Insensitive
Shorted SCR Always enabled only checks for shorted SCR when Start or
Jog is initiated
Heatsink Over-Temperature
Always On: Trips if heatsink reaches approximately 185°F
(85°C)
Emergency Across-The-Line Start Switch selectable RVS-Off-ATL
Default Setting
Per HP/FLA and Voltage
Enabled
Class 10
Disabled
Default Setting
Enabled
Per HP/FLA and Voltage
Enabled
Enabled
Enabled
Enabled
Class
10
Disabled
Enabled
Enabled
Off
Enabled
Enabled
Enabled
Enabled
Off
Toll Free: 800-884-0404 • www.naemotors.com • e-mail: sales@naemotors.com
9
Data subject to change without notice
North American Electric
Reno, NV
Distributed by:
North American Electric
Houston, TX
North American Electric, Inc. P.O. Drawer 130 350 Vaiden Drive Hernando, MS 38632
Toll Free: 800-884-0404 Phone: 662-429-8049 Fax: 662-429-8546 Sales: 800-884-0405
www.naemotors.com e-mail: sales@naemotors.com
June 2014
April
2014
Download