February 26, 2016
The Municipality of Strathroy-Caradoc is requesting quotes on the following:
1 -- 2016 Single Axle Truck
As per our discussion, minimum requirements are:
• 20,000 lb. Front axle
• 23,000 lb. Rear axle
• 255 H/P engine
• Allison 3500 Transmission
• 425 front tires 425/65 R 22.5 Michelin Load Range L
• Air ride cab including air conditioning
• truck to be equipped with TUB body with wet system
• Full detachable Plow and Wing harness equipped on above mentioned unit
Please provide all specifications and warranties that pertain to your proposal, and date
truck would be available for delivery.
The purchaser to have the right to inspect vehicle being offered.
Any questions regarding this tender to be directed to:
Brad Dausett, Roads Manager
Municipality of Strathroy-Caradoc
519-245-1105 Ext 247
1 -- 2016 Single Axle Truck
SPECIFY:
YEAR
MAKE
MODEL
AIR TAX
P.S.T.
SUB-TOTAL
G.S.T
TOTAL
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
Optional Price
Price
P.S.T.
SUB-TOTAL
G.S.T.
TOTAL
__________________
__________________
__________________
__________________
__________________
Offered on behalf of:
Company:
_____________________________
Address:
_____________________________
Signature:
_____________________________
Print Name:
_____________________________
Phone:
_____________________________
Date of Delivery:_______________________________________________
The Municipality of Strathroy-Caradoc reserves the right to accept or reject any tender
and also reserves the right to accept other than the lowest tender.
TENDER MUST BE SUBMITTED IN A SEALED ENVELOPE AND RECEIVED BY
12:00 NOON, THURSDAY, MARCH 31, 2016. Tenders received late will not be
accepted.
Tenders will be opened Thursday March 31, 2016 at 2:30 p.m. at the Municipal
Office, Committee Room – 2nd Floor.
Address to:
Jennifer Dolbear-McRoberts
Accounts Payable/Purchasing Officer
2016 Single Axle Truck
MUNICIPALITY OF STRATHROY-CARADOC
52 Frank Street, Strathroy, On N7G 2R4
(Please see additional “Model Profile – 2016 Single Axle Plow (13 pages) forming part of
this tender.)
MODEL PROFILE – 2016 Single Axle Plow & Wing Sander with Wet System
Set Ahead Axle
TOTAL 13 Pages
APPLICATION:
MISSION:
DIMENSION:
ENGINE, DIESEL:
TRANSMISSION, AUTOMATIC:
CLUTCH:
AXLE, FRONT NON-DRIVING:
AXLE, REAR, SINGLE:
CAB:
TIRE, FRONT:
TIRE, REAR:
SUSPENSION, RR, SPRING, SINGLE:
FRAME REINFORCEMENT:
PAINT:
Construction Dump
Requested GVWR: 43000. Calc. GVWR: 43000
Calc. Geared Speed: 72.6 MPH
Wheelbase: 195.00, CA: 120.00, Axle to Frame: 75.00
{Navistar N9} EPA 10, SCR, 300 HP @ 2000 RPM, 860 lb-ft Torque @ 1200
RPM, 2200 RPM
Governed Speed, 300 Peak HP (MAX)
{Allison 3500_RDS_P} 5th Generation Controls; Wide Ratio, 6-Speed, With
Double Overdrive;
On/Off Hwy; Includes Oil Level Sensor, With PTO Provision, Less Retarder,
With 80,000-lb GVW
& GCW Max.
Omit Item (Clutch & Control)
{Meritor MFS-20-133A} Wide Track, I-Beam Type, 20,000-lb Capacity
{Meritor RS-23-160} Single Reduction, 23,000-lb Capacity, 200 Wheel Ends,
Driver Controlled
Locking Differential Gear Ratio: 5.63
Conventional
(2) 425/65R22.5 XZY-3 (MICHELIN) 465 rev/mile, load range L, 20 ply
(4) 11R22.5 XDE M/S (MICHELIN) 497 rev/mile, load range H, 16 ply
Vari-Rate; 31,000-lb Capacity, Includes 4500-lb Capacity Multileaf Auxiliary
Outer "C" Channel, Heat Treated Alloy Steel (120,000 PSI Yield); 10.813" x
3.892" x 0.312";
(274.6mm x 98.9mm x 8.0mm); 480.0" (12192mm) Maximum OAL
Cab schematic 100GM
Location 1: 2303, Red (Std)
Chassis schematic N/A
1
Vehicle Specifications - 2016 Single Axle – Set Ahead Axle
DESCRIPTION:
Base Chassis, SFA 4X2 with 195.00 Wheelbase, 120.00 CA, and 75.00 Axle to
Frame.
FRAME RAILS Heat Treated Alloy Steel (120,000 PSI Yield); 10.125" x 3.580" x 0.312"
(257.2mm x 90.9mm x 8.0mm); 480.0" (12192) Maximum OAL
FRAME REINFORCEMENT Outer "C" Channel, Heat Treated Alloy Steel (120,000 PSI Yield);
10.813" x 3.892" x 0.312"; (274.6mm x 98.9mm x 8.0mm); 480.0" (12192mm) Maximum OAL
BUMPER, FRONT Steel, Swept Back
Includes
BUMPER, FRONT Powder Coated Gray (Argent) Color
FRAME EXTENSION, FRONT Integral; 20" In Front of Grille, With Outer "C" Channel
Reinforcement
WHEELBASE RANGE 146" (370cm) Through and Including 195" (495cm)
AXLE, FRONT NON-DRIVING {Meritor MFS-20-133A} Wide Track, I-Beam Type, 20,000-lb Capacity
Notes
The following features should be considered when calculating Front GAWR: Front Axles; Front
Suspension; Brake System; Brakes, Front Air Cam; Wheels; Tires.
SHOCK ABSORBERS, FRONT
SPRINGS, FRONT AUXILIARY Rubber
SUSPENSION, FRONT, SPRING Multileaf, Shackle Type, Single Stage Spring; 20,000-lb Capacity;
Less Shock Absorbers
Includes
SPRING PINS Rubber Bushings, Maintenance-Free
Notes
The following features should be considered when calculating Front GAWR: Front Axles; Front
Suspension; Brake System; Brakes, Front Air Cam; Wheels; Tires.
BRAKE SYSTEM, AIR Dual System for Straight Truck Applications
Includes
BRAKE LINES Color and Size Coded Nylon
DRAIN VALVE Twist-Type
DUST SHIELDS, FRONT BRAKE
DUST SHIELDS, REAR BRAKE
GAUGE, AIR PRESSURE (2) Air 1 and Air 2 Gauges; Located in Instrument Cluster
PARKING BRAKE CONTROL Yellow Knob, Located on Instrument Panel
PARKING BRAKE VALVE For Truck
QUICK RELEASE VALVE Bendix On Rear Axle for Spring Brake Release: 1 for 4x2, 2 for 6x4
SLACK ADJUSTERS, FRONT Automatic
SLACK ADJUSTERS, REAR Automatic
SPRING BRAKE MODULATOR VALVE R-7 for 4x2, SR-7 with relay valve for 6x4
2
Notes
Rear Axle is Limited to 23,000-lb GAWR with Code 04091 BRAKE SYSTEM, AIR and Standard Rear
Air Cam
Brakes Regardless of Axle/Suspension Ordered.
BRAKES, FRONT, AIR CAM 16.5" x 6", Includes 24 SqIn Long Stroke Brake Chambers
Notes
The following features should be considered when calculating Front GAWR: Front Axles; Front
Suspension; Brake System; Brakes, Front Air Cam; Wheels; Tires.
TRAILER CONNECTIONS Four-Wheel, With Hand Control Valve and Tractor Protection Valve, for
Straight Truck
AIR BRAKE ABS {Bendix AntiLock Brake System} Full Vehicle Wheel Control System (4Channel) With Automatic Traction Control
AIR DRYER {Bendix AD-9} With Heater
Includes
AIR DRYER LOCATION Inside Left Rail, Back of Cab
BRAKE CHAMBERS, FRONT AXLE {Haldex} 24 SqIn
BRAKE CHAMBERS, REAR AXLE {MGM TR3030LP3TSHD} 30/30 Spring Brake
Includes
BRAKE CHAMBERS, SPRING (2) Rear Parking; WITH TRUCK BRAKES: All 4x2, 4x4; WITH
TRACTOR BRAKES: All 4x2, 4x4; 6x4 & 6x6 with Rear Tandem Axles Less Than 46,000-lb. or
GVWR Less Than 54,000- lb.
BRAKES, REAR, AIR CAM S-Cam; 16.5" x 7.0"; Includes 30/30 Sq.In. Long Stroke Brake Chamber
and Spring Actuated Parking Brake
Notes
The following features should be considered when calculating Rear GAWR: Rear Axles; Rear
Suspension; Brake System; Brakes, Rear Air Cam; Brake Shoes, Rear; Special Rating, GAWR;
Wheels; Tires.
AIR COMPRESSOR {Bendix Tu-Flo 750} 16.5 CFM Capacity
DRAIN VALVE Automatic, With (3) Pull Chains, for Air Tanks
STEERING COLUMN Tilting and Telescoping
STEERING WHEEL 2-Spoke, 18" Diam., Black
STEERING GEAR (2) {Sheppard M-100/M-80} Dual Power
EXHAUST SYSTEM Switchback Horizontal After treatment Device, Frame Mounted Right Side
Under Cab; Includes Single Vertical Tail Pipe, Frame Mounted Right Side Back of Cab
TAIL PIPE (1) Turn back Type, Non-Bright, for Single Exhaust
ELECTRICAL SYSTEM 12-Volt, Standard Equipment
Includes
BATTERY BOX Steel with Plastic Lid
DATA LINK CONNECTOR For Vehicle Programming and Diagnostics In Cab
FUSES, ELECTRICAL SAE Blade-Type
3
HAZARD SWITCH Push On/Push Off, Located on Top of Steering Column Cover
HEADLIGHT DIMMER SWITCH Integral with Turn Signal Lever
HEADLIGHTS (2) Sealed Beam, Round, with Chrome Plated Bezels
JUMP START STUD Located on Positive Terminal of Outermost Battery
PARKING LIGHT Integral with Front Turn Signal and Rear Tail Light
RUNNING LIGHT (2) Daytime, Included With Headlights
STARTER SWITCH Electric, Key Operated
STOP, TURN, TAIL & B/U LIGHTS Dual, Rear, Combination with Reflector
TURN SIGNAL SWITCH Self-Cancelling for Trucks, Manual Cancelling for Tractors, with Lane
Change Feature
WINDSHIELD WIPER SWITCH 2-Speed with Wash and Intermittent Feature (5 Pre-Set Delays),
Integral with Turn Signal Lever
WINDSHIELD WIPERS Single Motor, Electric, Cowl Mounted
WIRING, CHASSIS Color Coded and Continuously Numbered
Rear Tire Fenders
HORN, ELECTRIC (2) Disc Style
POWER SOURCE Cigar Type Receptacle without Plug and Cord
ALTERNATOR {Delco Remy 28SI} Brush Type, 12 Volt 160 Amp. Capacity, Pad Mount, with
Remote Voltage Sensor
BODY BUILDER WIRING INSIDE CAB; Includes Sealed Connectors for Tail/Amber,
Turn/Marker/Backup/ Accessory, Power/Ground, and Stop/Turn
BATTERY SYSTEM {International} Maintenance-Free (3) 12-Volt 2775CCA Total
2-WAY RADIO Wiring Effects; Wiring With 20 Amp Fuse Protection, Includes Ignition Wire With 5
Amp Fuse, Wire Ends Heat Shrink and Routed to Center of Header Console in Cab
RADIO AM/FM/CD/WB/Clock/Bluetooth/USB Input/3MM Auxiliary Input, MP3, Apple Device Play
& Control, Bluetooth for Phone & Music, with Multiple Speakers
BACK-UP ALARM Electric, 102 dBA
AUXILIARY HARNESS 3.0' for Auxiliary Front Head Lights and Turn Signals for Front Plow
Applications
TRAILER CONNECTION SOCKET 7-Way; Mounted at rear of Frame, Wired for Turn Signals
Combined With Pintal Hook
Stop, Compatible With Trailers That Use Combined Stop, Tail, Turn Lamps
SWITCH, BODY CIRCUITS, MID for Bodybuilder, 12 Momentary Switches in Instrument Panel,
Two Power Modules with 6 Channels, 20 Amp Max. Per Channel, 80 Amp Max Output, Switch
Control Power Modules Through Multiplex Wiring, Mounted In Cab Behind Driver
HORN, AIR Black, Single Trumpet, Air Solenoid Operated
WINDSHIELD WIPER SPD CONTROL Force Wipers to Slowest Intermittent Speed When Park
Brake Set and Wipers Left on for a Predetermined Time
BATTERY BOX Steel, With Fiberglass Cover, Mounted 53" Back of Cab, Left Side Perpendicular
to Frame Rail
SWITCH, TOGGLE, FOR WORK LIGHT Lighted; on Instrument Panel and Wiring Effects for
Customer Furnished Back of Cab Light
HEADLIGHTS Long Life Halogen; for Two Light System
4
CLEARANCE/MARKER LIGHTS (5) {Truck Lite} Amber LED Lights, Flush Mounted on Cab or
Sunshade
TEST EXTERIOR LIGHTS Pre-Trip Inspection will Cycle all Exterior Lamps Except Back-up Lights
HEADLIGHTS ON W/WIPERS Headlights Will Automatically Turn on if Windshield Wipers are
turned on
STARTING MOTOR {Delco Remy 39MT} 12 Volt; Gear Reduced, With Thermal Over-Crank
Protection
INDICATOR, LOW COOLANT LEVEL With Audible Alarm
ALARM, PARKING BRAKE Electric Horn Sounds in Repetitive Manner When Vehicle Park
Brake is "NOT" Set, With Ignition "OFF" and any Door Opened
CIRCUIT BREAKERS Manual-Reset (Main Panel) SAE Type III With Trip Indicators, Replaces All
Fuses Except For 5-Amp Fuses
TURN SIGNALS, FRONT LED, Includes LED Side Marker Lights, Mounted on Fender
FENDER EXTENSIONS Rubber
HOOD, HATCH (01) for Servicing
INSULATION, UNDER HOOD for Sound Abatement
GRILLE Stationary, Chrome
INSULATION, SPLASH PANELS for Sound Abatement
BUG SCREEN Front End; Mounted Behind Grille
FRONT END Tilting, Fiberglass, With Three Piece Construction; for 2007 & 2010 Emissions
PAINT SCHEMATIC, PT-1 Single Color, Design 100
Includes
PAINT SCHEMATIC ID LETTERS "GM"
PAINT TYPE Base Coat/Clear Coat, 1-2 Tone
PROMOTIONAL PACKAGE Government and Municipal Silver Package; Two Year Limited
Subscription of On- Command Service Information (Formerly Fleet ISIS), and On-Command Parts
Information (Formerly Fleet Parts Catalog), Requires Specific Feature Combinations
CLUTCH Omit Item (Clutch & Control)
PTO EFFECTS, ENGINE FRONT Less PTO Unit, Includes Adapter Plate on Engine Front
Mounted
ENGINE, DIESEL {Navistar N9} EPA 10, SCR, 300 HP @ 2000 RPM, 860 lb-ft Torque @ 1200
RPM, 2200
RPM Governed Speed, 300 Peak HP (MAX)
Includes
AIR COMPRESSOR AIR SUPPLY LINE Naturally-Aspirated (Air Brake Chassis Only)
ANTI-FREEZE Red Shell Rotella Extended Life Coolant; -40 Degrees F/ -40 Degrees C; for Maxx
Force and Navistar Engines
COLD STARTING EQUIPMENT Intake Manifold Electric Grid Heater with Engine ECM Control
CRUISE CONTROL Electronic; Controls Integral to Steering Wheel
5
ENGINE OIL DRAIN PLUG Magnetic
ENGINE SHUTDOWN Electric, Key Operated
FUEL FILTER Included with Fuel/Water Separator
FUEL/WATER SEPARATOR Fuel/Water Separator and Fuel Filter in a Single Assembly; With
Water-in-Fuel
Sensor; Engine Mounted
GOVERNOR Electronic
OIL FILTER, ENGINE Spin-On Type
WET TYPE CYLINDER SLEEVES
FAN DRIVE {Horton Drivemaster Polar Extreme} Direct Drive Type, Two Speed, With Residual
Torque Device for Disengaged Fan Speed
Includes
FAN Nylon
RADIATOR Aluminum, Cross Flow, Series System; 1228 SqIn Core and 648 SqIn Charge Air
Cooler
FEDERAL EMISSIONS EPA, OBD and GHG Certified for Calendar Year 2015; N9 & N10 Engines
AIR CLEANER Dual Element, with Integral Snow Valve and In-Cab Control
Includes
GAUGE, AIR CLEANER RESTRICTION Air Cleaner Mounted
THROTTLE, HAND CONTROL Engine Speed Control; Electronic, Stationary, Variable Speed;
Mounted on
Steering Wheel
ENGINE CONTROL, REMOTE MOUNTED Provision for; Includes Wiring for Body Builder
Installation of PTO Controls; With Ignition Switch Control for MaxxForce and Navistar post 2007
Emissions Electronic Engines
BLOCK HEATER, ENGINE {Phillips} 120 Volt/1250 Watt; With "Y" Cord From Socket in Standard
Location, For a Dealer Installed Oil Pan Heater, With Extended Life Coated Metal/Plastic/Metal
Material Oil Pan
Includes
BLOCK HEATER SOCKET Receptacle Type; Mounted below Drivers Door
Notes
MPM material is single sheet composite with two layers of sheet metal sandwiching plastic
material. MPM material has electro-deposition prime coat with powder coating for the final finish
coat.
TRANSMISSION, AUTOMATIC {Allison 3500_RDS_P} 5th Generation Controls; Wide Ratio, 6Speed, With Double Overdrive; On/Off Hwy; Includes Oil Level Sensor, With PTO Provision, Less
Retarder, With 80,000- lb GVW & GCW Max.
OIL COOLER, AUTO TRANSMISSION {Modine} Water to Oil, for Allison or CEEMAT Transmission
TRANSMISSION SHIFT CONTROL {Allison} Push-Button Type; for Allison 3000 & 4000 Series
Transmission
TRANSMISSION OIL Synthetic; 29 thru 42 Pints
ALLISON SPARE INPUT/OUTPUT for Rugged Duty Series (RDS); General Purpose Trucks,
Construction
6
TRANSMISSION TCM LOCATION Located Inside Cab
SHIFT CONTROL PARAMETERS Allison 3000 or 4000 Series Transmissions, 5th
Generation Controls, Performance Programming
AXLE, REAR, SINGLE {Meritor RS-23-160} Single Reduction, 23,000-lb Capacity, 200 Wheel Ends,
Driver
Controlled Locking Differential . Gear Ratio: 5.63
Includes
REAR AXLE DRAIN PLUG (1) Magnetic, For Single Rear Axle
Notes
The following features should be considered when calculating Rear GAWR: Rear Axles; Rear
Suspension; Brake System; Brakes, Rear Air Cam; Brake Shoes, Rear; Special Rating, GAWR;
Wheels; Tires.
When Specifying Axle Ratio, Check Performance Guidelines and TCAPE for Startability and
Performance
SUSPENSION, RR, SPRING, SINGLE Vari-Rate; 31,000-lb Capacity, Includes 4500-lb Capacity
Multileaf Auxiliary
Notes
The following features should be considered when calculating Rear GAWR: Rear Axles; Rear
Suspension; Brake System; Brakes, Rear Air Cam; Brake Shoes, Rear; Special Rating, GAWR;
Wheels; Tires.
SHOCK ABSORBERS, REAR (2)
AXLE, REAR, LUBE {EmGard FE-75W-90} Synthetic Oil; 30 thru 39.99 Pints
FUEL TANK STRAPS Bright Finish Stainless Steel
DEF TANK 9.5 U.S. Gal. 36.0L Capacity, Frame Mounted Outside Left Rail, Under Cab
FUEL TANK Top Draw; Non-Polished Aluminum, 26" Diam., 70 U.S. Gal., 265 L Capacity Mounted
Left Side, Under Cab
CAB Conventional
Includes
ARM REST (2) Molded Plastic; One Each Door
COAT HOOK, CAB Located on Rear Wall, Centered Above Rear Window
CUP HOLDERS Two Cup Holders, Located in Lower Center of Instrument Panel
DOME LIGHT, CAB Rectangular, Door Activated and Push On-Off at Light Lens, Timed Theater
Dimming, Integral to Console, Center Mounted
GLASS, ALL WINDOWS Tinted
GRAB HANDLE, CAB INTERIOR (1) "A" Pillar Mounted, Passenger Side
GRAB HANDLE, CAB INTERIOR (2) Front of "B" Pillar Mounted, One Each Side
INTERIOR SHEET METAL Upper Door (Above Window Ledge) Painted Exterior Color
STEP (4) Two Steps Per Door
GRAB HANDLE, CAB INTERIOR (2) Safety Yellow
GAUGE CLUSTER English With Metric Electronic Speedometer
Includes
GAUGE CLUSTER (6) Engine Oil Pressure (Electronic), Water Temperature (Electronic), Fuel
(Electronic)
7
Tachometer (Electronic), Voltmeter, Washer Fluid Level
ODOMETER DISPLAY, Miles, Trip Miles, Engine Hours, Trip Hours, Fault Code Readout
WARNING SYSTEM Low Fuel, Low Oil Pressure, High Engine Coolant Temp, and Low Battery
Voltage (Visual and Audible)
Notes:
Standard in Canada
GAUGE, OIL TEMP, ALLISON TRAN
GAUGE, AIR CLEANER RESTRICTION {Filter-Minder} With Black Bezel Mounted in Instrument
IP CLUSTER DISPLAY On Board Diagnostics Display of Fault Codes in Gauge Cluster
GAUGE, DEF FLUID LEVEL
SEAT, DRIVER {National 2000} Air Suspension, High Back With Integral Headrest, Cloth, Isolator, 1
Chamber
Lumbar, 2 Position Front Cushion Adjust, -3 to +14 Degree Back
Angle Adjust
Includes
SEAT BELT 3-Point, Lap and Shoulder Belt t y p e
MIRROR, CONVEX, LOOK DOWN {Lang Mekra} Right Side; 6" x 10 1/4", With Bright Finish
GRAB HANDLE Chrome; Towel Bar Type With Anti-Slip Rubber Inserts; for Cab Entry Mounted
Left Side Only at "B" Pillar
SEAT, PASSENGER {National} Non Suspension, High Back With Integral Headrest, Cloth, With
Fixed Back, With Under Seat Storage
MIRRORS (2) {Lang Mekra} Rectangular 7.55" x 14.1" Integral Convex Both Sides, 102" Inside
Spacing, Breakaway Type, Thermostatically Controlled Heated Heads, Bright Finish Heads, with
Black Brackets and Arms
SEAT BELT All Orange; 1 to 3
ARM REST, RIGHT, DRIVER SEAT
AIR CONDITIONER {Blend-Air} With Integral Heater & Defroster
Includes
HEATERHOSES Premium
HOSE CLAMPS, HEATER HOSE Mubea Constant Tension
REFRIGERANT Hydrofluorocarbon HFC-134A
HOSE CLAMPS, HEATER HOSE {Breeze} Belleville Washer Type
INSTRUMENT PANEL Center Section, Ergonomic Panel
WINDOW, POWER (2) And Power Door Locks, Left and Right Doors, Includes Express Down
Feature
HVAC FRESH AIR FILTER
CAB INTERIOR TRIM Premium
Includes
"A" PILLAR COVER Molded p lastic
CAB INTERIOR TRIM PANELS Cloth Covered Molded Plastic, Full Height; All Exposed Interior
8
Sheet Metal is Covered Except for the Following: with a Two-Man Passenger Seat or with a Full
Bench Seat the Back Panel is Completely Void of Covering
CAB SOUND INSULATION Includes Dash and Engine Cover
Insulators
CAB, INTERIOR TRIM, CLOSEOUT Lower Dash Closeout Panel; Molded Plastic; Under
Instrument Panel Driver Side
CONSOLE, OVERHEAD Molded Plastic; With Dual Storage Pockets with Retainer Nets, CB
Radio Pocket, Speakers, and Reading Lights
COURTESY LIGHT (2) Mounted In Front Map Pocket Left and Right Side
DOOR TRIM PANELS with Cloth Insert on Bolster Driver and Passenger Doors
FLOOR COVERING Rubber, Black
GAUGE, TEMPERATURE, AMBIENT Includes Wiring and Sensor With Display Unit Mounted in
Cluster
HEADLINER Soft Padded Cloth
INSTRUMENT PANEL TRIM Molded Plastic with Black Center Section
STORAGE POCKET, DOOR (2) Molded Plastic (Carpet Texture), Full-Length; Driver and
Passenger Doors
SUN VISOR (3) Padded Vinyl: 2 Moveable (Front-to-Side) Primary Visors, Driver Side with Vanity
Mirror and
Toll Ticket Strap, plus 1 Auxiliary Visor (Front Only), Driver Side
CAB REAR SUSPENSION Air Bag Type
SUNSHADE, EXTERIOR Aerodynamic, Painted Roof Color; Includes Integral Clearance/Marker
Lights
WINDSHIELD WIPER BLADES Snow Type
COWL TRAY LID
WHEELS, FRONT DISC; 22.5" Non-Polished Aluminum, 10-Stud (285.75MM BC) Hub Piloted,
Flanged Nut, Metric Mount, 12.25 DC Rims; With Steel Hubs
Notes
Aluminum Wheels not Painted or Coated
Compatible Tire Sizes: 385/65R22.5, 425/65R22.5
WHEELS, REAR {Maxion 90541} DISC; 22.5" Painted Steel, 2 Hand Hole, 10 Stud (285.75MM BC)
Hub Piloted, Flanged Nut, Metric Mount, 8.25 DC Rims; With Steel Hubs
PAINT IDENTITY, REAR WHEELS Disc Rear Wheels; With Vendor Applied White Powder Coat
Paint
WHEEL GUARDS, FRONT {Accuride} for Metric Hub Piloted Wheels with Flanged Mounting Nuts
Mounted Between Hub and Wheel
WHEEL BEARING, FRONT, LUBE {EmGard 50W} Synthetic Oil
(4) TIRE, REAR 11R22.5 XDE M/S (MICHELIN) 497 rev/mile, load range H, 16 ply
(2) TIRE, FRONT 425/65R22.5 XZY-3 (MICHELIN) 465 rev/mile, load range L, 20 ply
Services Section:
WARRANTY Standard
9
WEIGHT STANDARD
Graphics are provided as visual aids only and are not intended to represent the actual scale, shape, or color of the truck or
its components. All weights are represented in lbs.
Truck
Bumper to Axle
Wheelbase
Axle to Frame
Axle to Back Cab
Cab to Axle
Usable CA
CA Reduction
Fuel-Diesel(Gals)
DEF(Gals)
Before the Cab
# Weight
CG
Body/Trailer
(BA) 32.0 Body Length
(WB) 95.00
(AF) 75.00
(ABC)
75
(CA) 120
120
0
0
0
#
Cab
Weight
CG
(BL)
Payloads
Chassis
# Weight
1
0
Loads
Payload Weight:
Driver:
Fuel-Diesel(Lbs):
DEF(Lbs):
Weight Distribution
Total Front Axle:
Total Rear Axle:
Total Weight:
0
0
0
0
8,880
6,084
14,964
10
CG
1
Chassis/Empty Weights
N/A Tractor Front Axle:
Tractor Rear Axle:
Body
# Weight
CG
After the Body
# Weight
CG
8,880
6,084
Weight Distribution
All weights are represented in
lbs.
Truck
Front
Rear Total
8,880
0
0
6,084 14,964
0
0
0
0
Chassis Weight
Chassis Weight:
Fuel:
DEF:
(Curb Weight): 8,880 6,084 14,964
Loads
Payloads:
Driver:
0
0
0
0
0
0
Axle Totals (Gross Weight): 8,880 6,084 14,964
Weight Ratings
Truck
Front
Rear
Axle(axle capacity)
20,000 23,000
Tire(tire capacity)
22,800 26,440
Suspension(suspension capacity)
20,000 31,000
Spring:
0
Wheel Combination
Load
Limit
1-2
14,964
N/A
Maximum Gross Vehicle Weight Rating (GVWR) 43,000 - Gross Vehicle Weight(GVW) 14,964 = 28,036 Reserves
Weight Summary
* Distributed weights are within capacity limits
11
MINIMUM REQUIREMENTS:
BODY
- U Body dump box
- 10 foot outside length with nitride telescopic hoist
- 10 foot outside / tanks & pre west system
- air powered square double acting tailgate
- 1/4" thick summer hauling main chain cover
- hinged fold-up ladder to be installed on client specified side of body
- air powered tarp system with stainless steel air cylinder rods
- integral body fenders pre wet tanks
- additional stainless steel wrap around rear wheels truck frame mounted fenders
- single spinner cross-conveyor chain discharging behind driver/ahead of rear wheel with polymer chute and polymer
spinner dish
- spreading controlled by a CS550 Bosch-Rexroth spreader control system fully programmed for closed loop granular
application
- conveyor sensor shall be fitted directly to the gear box, or, if fitted to the motor must be minimum 100 pulse type
manufacture red by White
- body must have a safety prop setup that will not be affected by the addition of pre-wet tanks in the future
- body shall be sandblasted, epoxy primed with a zinc rich primer, and top coated in a urethane to match the cab
- lighting must meet the requirements of Transport Canada's CMVSS, must be LED type, and must be supplied with
a custom made weather tight wire harness
- spinner, wing, and plow lamps need not be LED type
- one Star 200 blue and one Star 200 amber strobe lamp shall be mounted above the body tarp roller visible at 360
degrees not mounted to box
PLOW HARNESS
- fully hydraulic detachable plow harness with nitride treated locking pins
- harness must allow for the easy removal of the plow and front wing post
- harness must include integral support stands
- harness requires hydraulic cylinders to provide for plow lifting, harness forward tilting, upper locking pin, and lower
locking pin
- flat faced stainless steel quick connect hydraulic fitting must be provided for the plow and wing removal
- plow harness shall include a left and right plow headlamp assembly mounted on adjustable pedestals with integral turn
signals
- plow headlamps shall utilize a chassis supplied factory wire harness and in-dash switch
- harness shall be finished in sandblasted, epoxy primed, and finished in urethane black
FRONT PLOW
- Reversible Trip Edge Plow Polymer Moldboard
Features
- Reversible Moldboard 35 degrees
- Either side of Bull Doze position
- Trip edge design plow
- 3 – ½” bore x 16” stroke reverse cylinders
- 31” drive ear centers
- 39” to 45” High Moldboard Curl
- Ram Reverse
12
ALL-HYDRAULIC SINGLE ARM WING
- 8" I beam front post with a rubber block safety trip mechanism and 12" convex mirror
- rear arm hookup shall include horizontal pins with stainless steel flat faced hydraulic quick connect lines
- there shall be no rear tower or raised post
- the system arm shall incorporate two hydraulic cylinders; one to extend the arm length so that the wing clearing path
can be adjusted, a second cylinder lifts the wing into the carrying position
- the system must include only one rear wing arm
- a turn-buckle setup supplied with the wing assists in supporting the wing during detaching/attaching
- all hydraulic cylinders shall be QPQ nitride treated
WING,
- 12 foot overall length wing with a 11 foot reversing high carbon steel blade, two cast moldboard shoes, and one curb
runner shoe
- wing lower main support angle shall be minimum of 3/4" x 4" x 4", and all moldboard support ribs shall be minimum 1/2"
thick
- rear of the wing must be open without any cavities that might create premature corrosion by trapping moisture
- wing shall be finished in black
HYDRAULICS
- hydraulic system shall be a closed-center loading sensing type
- Bosch-Rexroth 85 CM3 piston pump with hydraulic automatic shut-down valve and in-cab override controller (pump
A10V085DFR52L, auto shut-down block 229897, in-cab control 174383)
- Bosch-Rexroth combo valve enclosure/hydraulic reservoir model CS-VTM-160-RFM-70-R-L-B-S-T-F-XX with closed-center
valving
- all plow/wing/body hoist functions shall be air actuated controlled by feather air joysticks installed on an adjustable
stand inside the cab
- Rexroth valve must include three spools to control the spinner, conveyor, and future addition of a pre-wet system
- the hydraulic system shall also incorporate a high pressure hydraulic filter with a minimum 70gpm capacity and 10
micron absolute filtering power
- all pressure hydraulic lines must be covered by kevlar hose sleeves on 100% of the hoses
- acceptable high pressure lines must be rated for a minimum of 4250psi at 1/2 inch
IN-CAB SETUP
- a panel between the driver and passenger seat shall include all the hoist, tarp, tailgate, and front harness tilt functions
- CS550 display and controller setup shall be fitted to a bracket within easy reach of the operator
- all plow/wing functions shall be powered by featherable air joysticks mounted on a swiveling arm between the seats
- all lighting shall be controlled by factory dash mounted switches supplied with the chassis
PLEASE NOTE: This brief specification may not be inclusive of every item that might be require to insure a fully functional
and legally compliant snowplow and body setup. The supplier shall enclose their set of specs. For the unit they are
supplying. The supplier must assure that the unit provided is 100% work ready upon arrival at Strathroy-Caradoc
13