product news
Electromagnetic field immune sensors
with same sensing range on all metals.
Constant sensing range
on all metals.
Resistant to weld slag
by teflon coating.
Different designs:
M12, M18, M 30 and rectangular.
Robust M12 connector.
Electromagnetic field immune:
suitable for AC / DC and
medium-frequency welding.
System
No matter whether steel, aluminium, copper or other nonferrous metals: The new “K =1” sensors have the same
sensing range on all metals, i.e. the correction factor is
constant.
Electromagnetic field immune
Due to the special coil structure the proximity switches are
insensitive to interfering magnetic fields. This makes them
an optimum choice for use in welding equipment. To prevent weld slag from getting stuck on the housing the surface is teflon-coated.
Different designs
The variety of types covers M12, M18 und M 30 through
to the rectangular design IMC. Particularity: For the design
IMC the sensing face can be rotated in 5 different positions.
General technical data
10...36 V DC for rectangular housing
short-circuit and reverse polarity protection
overload protection
operating temperature –25°C...70°C
M12 connector
4-port LED for cylindrical designs
flush and non-flush versions
fluid
sensors
position
sensors
networking
and control
Position sensors
Inductive proximity switches with
a constant correction factor 1.
R
Inductive, capacitive and
magnetic proximity switches
Applications:
Automotive industry
Constant sensing range on all metals
DC PNP
3-wire
Position sensors
Electrical design
Connection
Type
M12
Nominal sensing range sn [mm]
DC PNP
4-wire
M18
M 30
Quader
2f
4 nf
5f
8 nf
10 f
10 nf
IF 5995
IF 5996
IG 6050
IG 6051
II 5892
II 5893
20 f
Output
35 nf
complementary
Order no.
Operating voltage
[V]
IM 5067
IM 5073
IM 5097
10...30 DC
10...36 DC
Current rating
[mA]
200
250
Leakage current
[mA]
–
–
•
•
Short-circuit protection, pulsed
Rev. pol. prot., overl. protection
•
•
[mA]
<15
< 20
Switching status
Operation
LED
LED
yellow
–
yellow
green
Switching frequency
[Hz]
Operating temperature
[°C]
Current cons. at 24 V
IM 5098
Function display
200
Protection
20
50
20
250
–25...70
–25...70
IP 67
IP 67
teflon-coated brass
Housing material
PPE / PPS
PPS
PPS
Sensing face
Total length
50
[mm]
60
65
PPS*
Wiring diagram
1
1
PPS*
M12 connector
M12 connector
Connection
PPS
40 x 40 x 66
65
L+
L+
2
4
4
3
Sockets
3
L
*teflon-coated
Dimensions
66
2 m (PUR), M12 straight, without LED
E 10906
ifm
2 m (PUR), M12 angled, without LED
E 10900
ifm
2 m (PUR), M12 angled, with 3 LEDs
E 10903
ifm
5 m (PUR), M12 straight, without LED
E 10907
ifm
5 m (PUR), M12 angled, without LED
E 10901
ifm
5 m (PUR), M12 angled, with 3 LEDs
E 10904
40
17
5,4
5,4
Accessories
example IM 5073
Description
LED
8,5
ifm
40
34
M12 x1
Order no.
10
Design
30
20
We reserve the right to make technical alterations without prior notice.
Printed in Germany on non - chlorine bleached paper. KE48/2002
Socket
type
4:
2:
L
33
6
46
61
Order no.
Plastic mounting sleeve with end stop for M12
E 11047
Plastic mounting sleeve with end stop for M18
E 11048
Plastic mounting sleeve with end stop for M 30
E 11049
Angle bracket for type M12, stainless steel
E 10735
Angle bracket for type M18, stainless steel
E 10736
Angle bracket for type M 30, stainless steel
E 10737
Visit our website: www.ifm-electronic.com