E-ZZ-M
MACRO-H
HOOK TEST CONNECTOR
BASIC MODEL
Actual Size
Basic Part Number
XH-(color)
XH-SS
Field Serviceable: To connect or replace leads, pull straight
out on plunger until it slips free of body. Strip lead wire 3/4”
(19mm), feed wire through plunger and wrap around terminal as
shown in figure 1. Solder. Cut off excess wire at solder point.
Description
Macro-Hook Test Connector
Assortment - 1 each of 10 Solid Colors
Colors: Black, Brown, Red, Orange, Yellow, Green, Blue,
Violet, Gray and White PLUS Kilo-Color Capability. See
inside back cover for Kilo-Color Ordering Information.
Heavy-Duty Test hook. Ideal for connections over large leads, lugs
and terminals. Spring Loaded and Insulated to a single contact
point to assure true readings.
Construction: One Piece Nickel-Silver Conductor and Hook, .050”
(1.27mm) thick. Hook fits over component leads up to .125”
(3.18mm) diameter. Durable Nylon Body and Plunger. Stainless
Steel Compression Coil Spring provides approximately 40 ozs.
(1134 grams) contact pressure.
Reassemble, making sure that terminal and
nylon fins enter their respective grooves. Keep slack
in lead wire pulled out while assembling to prevent binding.
XCH...
COPPER CONTACT
MACRO-H
HOOK
FOR GREATER CURRENT CAPACITY
XD . . .
RIGHT ANGLE CONTACT
MACRO HOOK
Construction: Identical to Basic XH Model except contact
blade has a right angle hook. Available in all 10 colors
PLUS Kilo-Color.
Construction: Identical to the Basic XH Model except the
Conductor/Hook is made of .054” (1.37mm) thick Copper.
Note: To order any Test Lead or Coaxial Cable Assemblies
using XD Right Angle Macro-Hook, replace XH in Part
Number with XD.
Note: To order any Test Lead or Coaxial Cable Assemblies using
XCH Copper Contact Macro-Hook, replace XH in Part Number
with XCH.
Basic Part Number
XD-(color)
XD-SS
Description
Right Angle Macro Hook
Assortment - 1 Each of 10 Solid Colors
Basic Part Number
XCH-(color)
XCH-SS
63
Description
Copper Contact Macro-Hook
Assortment - 1 Each of 10 Solid Colors
E-ZZ-M
MACRO-H
HOOK TEST LEADS
MACRO-H
HOOK XH TO .080” (2.03mm) PIN PLUG
Actual Size
COLOR CHART
Black
Green
Brown
Blue
Red
Violet
Orange
Gray
Yellow
White
.080” (2.03mm) PIN PLUG: Nickel-Plated Brass Body. Plastic Handle. Solderless Assembly.
Red, Black. Red will be supplied with colors other than Black Unit. See P/N 9250.
Standard Unit Part Number
AXH-448-(color)
Additional Lenghts
AXH-112-(color)
AXH-118-(color)
AXH-224-(color)
AXH-336-(color)
AXH-660-(color)
AXHC-(color)
Lead Length
48”
120cm
12”
30cm
18”
45cm
24”
60cm
36”
90cm
60”
150cm
60” Coil Cord
MACRO-H
HOOK XH TO STANDARD BANANA PLUG
Standard Unit Part Number
BXH-448-(color)
Addtional Lenghts
BXH-112-(color)
BXH-118-(color)
BXH-224-(color)
BXH-336-(color)
BXH-660-(color)
BXHC-(color)
12”
30cm
18”
45cm
24”
60cm
36”
90cm
60”
150cm
60” Coil Cord
(Illustration NOT to Scale)
12”
30cm
18”
45cm
24”
60cm
36”
90cm
60”
150cm
60” Coil Cord
MACRO-H
HOOK, LEAD WIRE DESCRIPTIONS AND COLOR CHOICES: See top of page.
STACKING BANANA PLUG: Nickel-Plated Brass Body. Nickel-Silver Leaf Springs. Plastic Handle.
Snap Together Solderless Assembly. See P/N 9260.
(Illustration NOT to Scale)
Lead Length
12”
30cm
18”
45cm
24”
60cm
36”
90cm
48”
120cm
60”
150cm
60” Coil Cord
MACRO-H
HOOK XH TO METER BANANA PLUG
Standard Unit Part Number
605XH-448-(color)
Additional Lengths
605XH-112-(color)
605XH-118-(color)
605XH-224-(color)
605XH-336-(color)
605XH-660-(color)
605XHC-(color)
MACRO-H
HOOK, LEAD WIRE DESCRIPTIONS AND COLOR CHOICES: See top of page.
STANDARD BANANA PLUG: Nickel-Plated Brass Body. Nickel-Silver Springs. Plastic Handle.
Solderless Assembly. Red, Black. Red will be supplied with colors other than Black Unit.
See P/N 9214.
Lead Length
48”
120cm
MACRO-H
HOOK XH TO MACRO-H
HOOK XH JUMPER
Standard Unit Part Number
604XH-112-(color)
604XH-118-(color)
604XH-224-(color)
604XH-336-(color)
604XH-448-(color)
604XH-660-(color)
604XHC-(color)
(Illustration NOT to Scale)
Lead Length
48”
120cm
MACRO-H
HOOK XH TO STACKING BANANA PLUG
Standard Unit Part Number
601XH-448-(color)
Additional Lenghts
601XH-112-(color)
601XH-118-(color)
601XH-224-(color)
601XH-336-(color)
601XH-660-(color)
601XHC-(color)
MACRO-H
HOOK: One-Piece Nickel-Silver Contact. Nylon Body with removable Plunger for easy
service. StainlessSteel Spring. Hook fits component leads to .125” (3.175mm dia.)
LEAD WIRE:
18AWG 65 x 36 Tinned Copper with flexible PVC Insulation.
COIL CORD:
20AWG 42 x 36 PVC Insulated. Urethane Jacket. 10” Coil Length. 6” Pigtails. 60”Reach.
COLOR
1. Single Color Unit: Add desired color to Part No. See Color Chart. Example: AXH-Red.
CHOICES
2. Color Assortment (1 ea of 10 Colors): Add -S after Part Number. Example AXH-36-S.
3. Multicolor Unit: See Kilo-Color Ordering Information on inside back cover.
(Illustration NOT to Scale)
Lead Length
48”
120cm
12”
30cm
18”
45cm
24”
60cm
36”
90cm
60”
150cm
60” Coil Cord
MACRO-H
HOOK XH TO .080” (2.03mm) METER PIN PLUG
Standard Unit Part Number
606XH-448-(color)
Additional Lengths
606XH-112-(color)
606XH-118-(color)
606XH-224-(color)
606XH-336-(color)
606XH-660-(color)
606XHC-(color)
MACRO-H
HOOK, LEAD WIRE DESCRIPTIONS AND COLOR CHOICES: See top of page.
MACRO-H
HOOK, LEAD WIRE DESCRIPTIONS AND COLOR CHOICES: See top of page.
METER BANANA PLUG: Nickel-Plated Brass Body. Phosphor Bronze Springs. Plastic Handle.
Solder Assembly. Red, Black. Red will be supplied with colors other than Black Unit.
See P/N 9206.
(Illustration NOT to Scale)
Lead Length
48”
120cm
12”
30cm
18”
45cm
24”
60cm
36”
90cm
60”
150cm
60” Coil Cord
MACRO-H
HOOK, LEAD WIRE DESCRIPTIONS AND COLOR CHOICES: See top of page.
.080” (2.03mm) METER PIN PLUG: Nickel-Plated Brass Body. Plastic Handle. Solder Assembly.
Red, Black. Red will be supplied with colors other than Black Unit. See P/N 9207.
64
COLOR CHART
Black
Green
Brown
Blue
Red
Violet
Orange Gray
Yellow
White
MACRO-H
HOOK TEST LEADS
MACRO-H
HOOK XH TO LEAD ONLY . . . NO INTERFACE
Actual Size
Part Number
613XH-112-(color)
613XH-118-(color)
613XH-224-(color)
613XH-336-(color)
613XH-448-(color)
613XH-660-(color)
613XHC-(color)
Lead Length
12”
30cm
18”
45cm
24”
60cm
36”
90cm
48”
120cm
60”
150cm
60” Coil Cord
MACRO-H
HOOK: One-Piece Nickel-Silver Contact. Nylon Body with removable Plunger for easy service.
Stainless Steel Spring. Hook fits component leads to .125” (3.175mm) dia.
LEAD WIRE:
18AWG 65 x 36 Tinned Copper with flexible PVC Insulation.
COIL CORD:
20AWG 42 x 36 PVC Insulated. Urethane Jacket. 10” Coil Length. 6” Pigtails. 60” Reach.
COLOR
1. Single Color Unit: Add desired color to Part No. See Color Chart. Exmpl.: 613XH-12-Red.
CHOICES
2. Color Assortment (1 ea of 10 Colors): Add -S after Part Number. Example: 613XH-36-S.
3. Multicolor Unit: See Kilo-Color Ordering Information on inside back cover.
MACRO-H
HOOK XH TO SHROUDED RIGHT ANGLE STANDARD BANANA PLUG
Standard Unit Part Number
632XH-448-(color)
Additional Lengths
632XH-112-(color)
632XH-118-(color)
632XH-224-(color)
632XH-336-(color)
632XH-660-(color)
632XHC-(color)
Lead Length
48”
120cm
12”
30cm
18”
45cm
24”
60cm
36”
90cm
60”
150cm
60” Coil Cord
MACRO-H
HOOK, LEAD WIRE DESCRIPTIONS AND COLOR CHOICES: See top of page.
SHROUDED BANANA PLUG: Nickel-Plated Brass Body. Nickel-Plated Phosphor Bronze Springs. Plastic
Handle. Solderless Assembly. Red,Black. Red will be supplied with colors other than Black Unit. Fits
most Amprobe and Beckman Instruments. See P/N 9301.
MACRO-H
HOOK XH TO SHROUDED RIGHT ANGLE STANDARD BANANA PLUG
Standard Unit Part Number
633XH-448-(color)
Addtional Lengths
633XH-112-(color)
633XH-118-(color)
633XH-224-(color)
633XH-336-(color)
633XH-660-(color)
633XHC-(color)
12”
30cm
18”
45cm
24”
60cm
36”
90cm
60”
150cm
60” Coil Cord
MACRO-H
HOOK, LEAD WIRE DESCRIPTIONS AND COLOR CHOICES: See top of page.
SHROUDED BANANA PLUG: Nickel-Plated Brass Body. Nickel-Plated Phosphor Bronze Springs. Plastic
Handle. Solderless Assembly. Red, Black. Red will be supplied with colors other than Black Unit. Fits
most Fluke and B&K Precision Instruments. See P/N 9302.
12”
30cm
18”
45cm
24”
60cm
36”
90cm
60”
150cm
60” Coil Cord
MACRO-H
HOOK, LEAD WIRE DESCRIPTIONS AND COLOR CHOICES: See top of page.
SHROUDED BANANA JACK: Nickel-Plated BeCu Spring Socket. Plastic Handle. Solderless Assembly.
Red, Black. Red will be supplied with colors other than Black Unit. Fits most Simpson and Triplet
Instruments. See P/N 9309.
(Illustration NOT to Scale)
Lead Length
48”
120cm
12”
30cm
18”
45cm
24”
60cm
36”
90cm
60”
150cm
60” Coil Cord
MACRO-H
HOOK, LEAD WIRE DESCRIPTIONS AND COLOR CHOICES: See top of page.
STACKING SHROUDED BANANA PLUG: Male: Nickel-Plated Brass Body. Nickel-Plated Phosphor
Bronze Springs. Female: Nickel-Plated BeCu Spring Socket. Plastic Handle. Solderless Assembly. Red,
Black. Red will be supplied with colors other than Black Unit. Fits most Amprobe, Beckman, Simpson
and Triplett Instruments. See P/N 9305.
MACRO-H
HOOK XH TO SHROUDED RIGHT ANGLE STANDARD BANANA PLUG
Standard Unit Part Number
636XH-448-(color)
Additional Lengths
636XH-112-(color)
636XH-118-(color)
636XH-224-(color)
636XH-336-(color)
636XH-660-(color)
636XHC-(color)
(Illustration NOT to Scale)
Lead Length
48”
120cm
MACRO-H
HOOK XH TO SHROUDED RIGHT ANGLE STANDARD BANANA PLUG
Standard Unit Part Number
635XH-448-(color)
Additional Lengths
635XH-112-(color)
635XH-118-(color)
635XH-224-(color)
635XH-336-(color)
635XH-660-(color)
635XHC-(color)
(Illustration NOT to Scale)
Lead Length
48”
120cm
MACRO-H
HOOK XH TO SHROUDED RIGHT ANGLE STANDARD BANANA JACK
Standard Unit Part Number
634XH-448-(color)
Additional Lengths
634XH-112-(color)
634XH-118-(color)
634XH-224-(color)
634XH-336-(color)
634XH-660-(color)
634XHC-(color)
(Illustration NOT to Scale)
(Illustration NOT to Scale)
Lead Length
48”
120cm
12”
30cm
18”
45cm
24”
60cm
36”
90cm
60”
150cm
60” Coil Cord
MACRO-H
HOOK, LEAD WIRE DESCRIPTIONS AND COLOR CHOICES: See top of page.
STACKING SHROUDED BANANA PLUG: Nickel-Plated Brass Body and Socket. Nickel-Plated Phosphor
Bronze Springs. Plastic Handle. Solderless Assembly. Red, Black. Red will be provided with Colors
other than Black. Fits most Fluke and B&K Precision Instruments. See P/N 9306.
65