Solarequipment.co.za
LED Products Catalogue
Energy Efficient LED lights
LED Street Lights
LED Tube Lights
LED Down Lights
LED Spot Lights
LED High bay Light
LED Panel Lights
LED Flood Lights
LED Globes
Sales:
Tel: 041 4537602
Technical:
Tersius: Tel: 041 4537602, Cell: 0832840829, info@solarequipment.co.za
Address:
27 Hart Street, Siwell, Port Elizabeth, 6001
Web:
www.solarequipment.co.za
Johan Cell:0833695596
LED Lights – The future of lighting
LED - Light Emitting diodes are electronic devices
that converts electricity into light. LED lights are more
energy efficient and longer lasting than traditional
lights and are suited to residential, commercial and
industrial lighting purposes.
As LED lights emit less heat than conventional light
bulbs, less energy is wasted which makes them
easier on your electricity bill.
Advantages of LED lights:
Save on electricity usage and cost
LED Lights uses 65% less electricity compared to florescent lights, and 90% less electricity compared to
incandescent lights.
Save on lamp replacement cost
The operational life of LED lamps is 30 000 to 50 000 hours. That works out to 4 -6 years of continuous
operation, or 8 -12 years of 50% operation. The long operational life of a LED lamp is a stark contrast to the
average life of an incandescent bulb, which is typically 2000 hours and fluorescent which is typically 6000
hours. Thus on average LED lights last 15 times longer than incandescent lamps and 5 times longer than
fluorescent lamps.
Save on maintenance and labour
Due to the long operation life of LED lights, means it need replacing much less often than fluorescent of
incandescent lights. This can mean a big saving on maintenance and labour cost, especially if special
equipment is needed to replace lamps such as high bay lamps or street lamps.
Return on investment
Although the initial cost might be slightly higher than that of a traditional incandescent and fluorescent
bulbs, the extra cost will be repaid within two years from electricity savings, and the bulbs should not need
replacement for 10 years.
Save on operating cost
Save up to 40% in total operating cost, considering the savings in electricity, labour and replacement costs
Mercury-free - unlike fluorescent and most HID technologies, LEDs contain no hazardous mercury or
halogen gases
High efficiency - LEDs are now available that reliably offers over 100 lumens from a one-watt device,
and even much higher outputs at higher drive currents
Small size - provides design flexibility, arranged in rows, rings, clusters, or individual points
High durability - no filament or tube to break.
LED Compared to traditional florescent lights
Save electricity usage and cost
Uses 65% less electricity compared to florescent
lights.
Save on lamp replacement cost
Lifetime of more than 50 000 h compared to 6 000
Save on labour
Only needs replacing every 10 years compared to
annually.
Break even after only 2.9 years
Recover you initial investment after 2.9 years.
Save up to 40% in total operating cost
Considering electricity, labour and replacement costs.
LED Tube Lights
Replaces regular fluorescent tube lights
Save electricity usage and cost
Uses 65% less electricity compared to florescent
lights.
Save on lamp replacement cost
Lifetime of more than 50 000 h compared to 6 000.
Save on labour
Only needs replacing every 10 years compared to
annually.
Break even after only 2.9 years
Recover you initial investment after 2.9 years.
Save up to 40% in total operating cost
Considering electricity, labour and replacement costs.
LED tube compared to regular fluorescent tube
LED Tube
Regular
Fluorescent Tube
Power Consumption
18W
40W
Life Span
50000Hrs
6000Hrs
UV Radiation
No
Yes
Ra
80% Plus
Round 30%
Working Temperature
50
120
Ballast
No
Yes
Starter
No
Yes
Operating Frequency
No Flickering
50-60Hz
Light-on Time
0.4S
3S-5S
Colour Purity
High
Low
Cost to benefit comparison between LED tube
lights and fluorescent tube lights.
Example comparing 100 x 40 W fluorescent tube lights to equivalent 18 W LED tube lights
Variables used:  Number of lights:
 Operating hours per day:
 Number of days per year:
 Cost of electricity:
100 lights
8 hours
300 days
80c per kWh
Initial Cost per light
R 477.00 LED
Fluoresecnt
R 20.00 R ‐
R 100.00 R 200.00 R 300.00 R 400.00 R 500.00 R 600.00 LED lights initially cost 23 times more than fluorescent tube lights but...
Life Span in Hours
LED
50 000 h
6 000 h
Flourescent
0
10 000
20 000
30 000
40 000
50 000
60 000
LED Lights last 8 times longer than Incandescent lights.
Electricity Cost per year
LED
R 66.73 Flourescent
R 148.77 R ‐
R 20.00 R 40.00 R 60.00 R 80.00 R 100.00 R 120.00 R 140.00 R 160.00 LED lights use 55% less electricity than fluorescent lights.
Total operating costs per tube, per year
LED
R 110.73 Flourescent
R 180.76 R ‐
R 20.00 R 40.00 R 60.00 R 80.00 R 100.00 R 120.00 R 140.00 R 160.00 R 180.00 R 200.00 That is an 39% saving in total operating costs.
LED Street Lights
Energy saving LED street lights, utilizes high power LED’s as a light source. These state of the art
LED street lights can be directly connected with an 85-264 VAC power supply or alternatively it can
be powered by an optional Solar Panel Kit.
The following factors make LED lights a “greener” option than traditional florescent lights:
•
low power consumption
•
a lifespan of up to 50 000 hours and
•
no hazardous chemicals such as phosphorous vapours, lead or mercury
Day light (left) &
Night LED Light (right)
LU1
75W power consumption.
Replaces 250W High Pressure Sodium (HPS) lamp.
Luminous flux 2 100 lm
LU2
75W power consumption.
Replaces 250W High Pressure Sodium (HPS) lamp.
Luminous flux 4 200 lm
LU4
150 watt power consumption.
Replaces 250 watt High Pressure Sodium (HPS) Lamp.
Luminous Flux 8 400 lm
LU6
225 watt power consumption.
Replaces 400watt High Pressure Sodium (HPS) lamp.
Luminous Flux 12 800 lm
Our LED street
lights can easily
be adapted to run
from solar power.
SP90 Light bulb
36 watt power consumption.
Replaces 75/150W High Pressure Sodium
(HPS) lamps.
Luminous flux 2100 lm
For replacement in existing luminaires &
LU1 luminaire
LED Tube Lights
Benefits:







Work without ballast and starter.
Save over 60% electricity cost in total.
Connects directly to the 240 Volt AC power
Fits in a standard fluorescent tube fitting
Over 50,000 hours lifespan (that's more than 10
year at 12hour per night!).
Input voltage can be 24V DC or 240V AC.
Eco-friendly (No dangerous metals or gasses
such as mercury vapour)
LED compared to Fluorescent:






8 W LED = 20 W Fluorescent
12 W LED = 30 W Fluorescent
18 W LED = 40 W Fluorescent
24 W LED = 56 W Fluorescent
28 W LED = 65 W Fluorescent
36 W LED = 85 W Fluorescent
Models and specifications
Product
Code
Power
consumption
Lumens
Size
Width
Double
Sided
T8-09-2
9 Watt
660 lm
600mm (2 feet)
30mm
No
T8-18-4
18 Watt
1600 lm
1200mm (4 feet)
30mm
No
T8-24-5
22 Watt
2100 lm
1500mm (5 feet)
30mm
No
T16-18-2
18 Watt
600mm (2 feet)
30mm
Yes
T16-22-4
22 Watt
1200mm – (4 feet)
30mm
Yes
LED Tube Fitting
We stock a range of LED tube fittings. These fittings is very cost effective as there is no electronic starters
or ballasts. LED tubes connects directly to 220V.
Product
Code
Description
F2-1
600mm (2 feet) - Single
F2-2
600mm (2 feet) - Double
F4-1
1200mm (4 feet) - Single
F4-2
1200mm (4 feet) - Double
F5-1
1500mm (5 feet) - Single
F5-2
1500mm (5 feet) - Double
LED Spot Lights
Product
Code
MR16
Power
Consumption
SP50
3 Watt
SP70
SP80B
SP80
5 Watt
10 Watt
15 Watt
Lumens
170 lm
190 lm
250 lm
500 lm
750 lm
Incandescent
Equivalent
25 Watt
25 Watt
40 Watt
75 Watt
100 Watt
ᴓ 50mm x
45mm
ᴓ 50mm x 71mm
ᴓ 70mm x 99mm
ᴓ 80mm x 159mm
ᴓ 80mm x 200mm
Dimensions
Luminescenc
e Angle
Working
Voltage
Emission
Colour
30°
120°
12 V AC/DC
12, 24 V AC/DC or 85 – 264 VAC
Pure White, Warm White, Red, Yellow, Green or Blue
Colour
Temperature
Pure White or Warm White
Pure White 5 000 – 7 000 K, Warm White 3 000 – 4 000 K
Lamp Lens
Acrylic
Lamp Cup
Radiator
Aluminium Alloy
Lamp Base
GU 5.3
Certification
CE, RoHs
E27, E14, GU 10
CE, RoHs, UL
E27
CE, RoHs
LED Flood Lights
Applications





Factories
Gymnasiums
Security lighting
Billboard illumination
Etc
Features:







Natural colour
Tough And Durable
Toughened Glass Cover
Life span > 50,000 Hours
Single High Powerful LED Light Source
Die-cast aluminium housing for strength
Vacuum Metallic-Membrane Plating
Reflector
Specifications










Light source: Single Ceramic LED Array
Input voltage: 12 VDC or 200 – 265 VAC
Material: Aluminium alloy body with glass
cover
Insulation Grade: Class 1
Protection Grade: IP65
Working Environment: -40~55 degrees
Colour Temperature: 5500 Kelvin
Colour Renden of Index : >80 Ra
Beam Angle: 50 Degrees
Light Efficiency: >90%
Models and specifications
Product Code
FL10
FL20
FL50
Power consumption
10 Watt
20 Watt
50 Watt
Size L x W x H (mm)
115 x 86 x 86
220 x 190 x 130
290 × 236 × 183
Weight (kg)
2.3
Lumens
850 lm
3.5
1700 lm
4 250 lm
LED panel lights
Applications
Replacement for traditional fluorescent
lights.
 Offices
 Classrooms
 Museums
 Airports
 Art galleries
Specifications





Colour: Warm White/Cool White
Colour Temperature: 2800K-6500K
Voltage: AC 90~264V
LED Source: Taiwan
Lumenmax,SMD3014
Beam Angle: 120 degree
Models and specifications
Product Code
PL300x300
PL300x300B
PL300x600
PL600x600
Power consumption
15 Watt
15 Watt
40 Watt
80 Watt
Size L x W x H (mm)
300 x 300 x12
300 x 300 x12
600 x 600 x12
600 x 600 x12
Lumens
900 lm
900 lm
2700 lm
4700lm
Battery backup
No
Yes
No
No
LED Lights Information
Fitting Types
All lights is available in various different fitting types. (On request and in large quantities)
Colour Preference


Warm White (same colour as traditional light bulbs)
Pure White (same colour as traditional fluorescent lights)
Voltage

Most lights are available in either 12 V DC or 240 V AC
Warranty Statement
Solarequipment.co.za warrants all newly purchased products to be completely free from any defects or fa
from date of purchasing from Solarequipment.co.za or any of its approved distributors.
This warranty includes all repair work on the products and replacement of components as
Solarequipment.co.za may find to be necessary after thorough inspection of faulty due to improper
installation.
Any faulty product will be covered and repaired under warranty, which is delivered at
Solarequipment.co.za workshop in Port Elizabeth or to any of their designated agent/distributor
countrywide. The warranty does not cover any shipping costs or labour charges by any other company,
for removal and installation of the products.
Solarequipment.co.za will only take responsibility for installations done by their own qualified technicians
or approved contractors. No responsibility will be taken for faults arising from either any other installation
done by the client itself or any unauthorized agent.
Proper proof of purchase must be provided with any warranty claim submitted to this company.
This is the only valid warranty agreement and will Solarequipment.co.za not take any responsibility for
damages or losses that might arise from any defects or faults on products.
For any enquiries contact us:
Sales:
Tel: 041 4537602 Cell: 0832840829, Cell: 0833695596
Technical:
Cell: 0832840829
Web:
www.solarequipment.co.za