9–40 Capacitors, Delay Timers & Relays
Motor Run Capacitors
UL approved Start Capacitors available in
110 VAC, 165 VAC, 220 VAC and 330 VAC.
• Dry, electrolytic, no polarized type for intermittent duty in AC motors and compressors
• Used where starting torques must be higher in relation to running torques
• Moisture and oil resistant molded phenolic resin or plastic material
• Standard dual blade terminals
• Industry standard case sizes
Part No.
0454232
0454233
0454234
0454235
0454236
MFD Rating
108µF - 130µF
145µF - 175µF
189µF - 227µF
72µF - 88µF
88µF - 108µF
Voltage
330 VAC
330 VAC
330 VAC
330 VAC
330 VAC
SPP Series PTC/ Capacitor Combination
Choosing the correct hard start for the application combines a technical need with a professional preference. Select from the broadest offering of hard starts from the
Pioneer of Hard Start technology.
Features/Benefits:
• Positive Temperature Coefficient Technology (PTC)
• Field proven reliability
• Easy 2-wire installation
• Most economic
Applications:
• Use on any single phase air conditioner or refrigeration unit
• Low voltage situations
• Hard starting compressors
Part No.
0454355
0454356
Voltage
90 VAC - 277 VAC
90 VAC - 277 VAC
Torque
300% Increase
500% Increase
Time Delays
• (DOB) Upon application of power the load is energized immediately. When the thermostat opens or on power interruption the load is deenergized and the time delay initiates. The load will be energized again after the delay time has elapsed.
• (DOM) Upon application of power the time delay initiates. On completion of selected delay period, the load is energized. Timer is reset on power interruption or when thermostat disconnects.
• Two 1/4" male terminal connections
• Cut the jumper to use in 120/240 volts
Application:
• 0454398 replaces Diversitech ASC500-ADB-1 / ICM203 / Mars 32392 / A1-1
EAC-501-ADJ
• 0454397 replaces Diverisitech AC-800-ADM1 / ICM 102 / A-1 701 / Mars 32391
Part No.
0454397
0454398
Compact Size
2" x 2" x 0.075"
2" x 2" x 0.075"
Delay Range
6 sec - 8 min
6 sec - 5 min
Coil Voltage Temperature
19 AC / DC - 250 AC / DC 0˚F - 160˚F
19 AC / DC - 250 AC / DC 0˚F - 160˚F
General Purpose Fan Relays
Engineering Data
• CONTACTS: SPST-NO, SPST-NC, SPDT,
1 NO/1 NC, Material/Power - Silver
Alloy, Material 1/2 Pilot - Fine Silver
• POWER RATINGS(All Forms): 125
VAC, 18A Resistive, 12 FLA, 60 LRA,
240/277 VAC, 18A Resistive, 8 FLA,
48 LRA
• SPECIAL POWER RATINGS (Form 1 &
2): 125 VAC, 14 FLA, 84 LRA, 277 VAC,
25A Resistive
• PILOT RATINGS (All Forms ) : 3A, 277 VAC Gen. Purpose,
250 VA @ 250 VAC, 277 VA @ 277 VAC, 125 VA@ 125
VAC
• COILS: Voltage Ratings - 24,120, 208/240, 77 VAC, 12, 24 VAC
Frequency - 50/60 Hz Pick-up Voltage - AC 85% of nominal,
DC 75% of nominal, Power Ratings - AC DC, Inrush 5 VA 3VA,
Sealed 3 VA 3 VA
• 2-3/8" Height x 1-5/8" Width x 1-1/2" Depth
Part No.
0454166
0454167
0454168
0454169
0454173
0454174
0454175
Coil Voltage
24 VAC
24 VAC
120 VAC
240 VAC
24 VAC
240 VAC
24 VAC
Amps
4 @ 24 VAC
1 @ 24 VAC
1 @ 120 VAC
1 @ 240 VAC
12 @ 24 VAC
12 @ 120 VAC
13 @ 240 VAC
Poles & Throws
SPST
SPDT
SPDT
SPDT
SPDT
SPDT
SPST
General Purpose Switching Relays
Applications:
• HVAC/R
• Appliance vending machines
• Fan controls
• Business machines
Double pole - double throw (DPDT).
Terminals 1-6 are Power
Part No.
0454170
0454171
0454172
Coil Voltage
24 VAC
110 / 120 VAC
208 / 240 VAC
Amps
12 @ 120 VAC, 6 @ 277 VAC
12 @ 120 VAC, 6 @ 277 VAC
12 @ 120 VAC, 6 @ 277 VAC
Poles & Throws
DPDT
DPDT
DPDT
Potential Relays
• Meets all requirements of OEM relays
• Universal break-off bracket
Features/Benefits:
• 50/60 cycle
• Non-positional
• Instructions and wiring diagram included in each relay
Part No.
0454176
0454177
0454179
Coil Voltage
395 VAC Continuous
332 VAC Continuous
502 VAC Continuous
Amps
35 @ 277 VAC
35 @ 277 VAC
35 @ 277 VAC
For pricing and availability, contact your local Fastenal store or visit fastenal.com