SECTION 16080
WIRING DEVICES
PART 1 - GENERAL
1.01
SUBMITTAL REQUIREMENTS:
A. Submit material specifications, handling, shipping storage and installation
data for products specified under PART 2 - PRODUCTS.
B. Submit samples if requested (quantity as requested).
PART 2 - PRODUCTS
2.01
WIRING DEVICE DESCRIPTION AND MANUFACTURER:
A. 15A Duplex Receptacles:
1.
125V/15A/2P/3W/G rating - NEMA 5-15R type.
2.
Duplex receptacle with green hexagonal ground screw.
3.
Mounting frame with plaster ears, back and side wired; urea or nylon
body.
4.
Face color shall be Ivory.
5.
Designated Manufacturers by Device Series:
a.
General Electric
5262-* Series
b.
Arrow-Hart
5262-* Series
c.
Hubbell
5262-* Series
d.
Pass & Seymour
5262-* Series
e.
Leviton
5262-* Series
B. 20A Single & Duplex Receptacles:
1.
Single or duplex type receptacle as indicated.
2.
125V/20A/2P/3W/G rating - NEMA - 5-20R type.
Hualapai Nation
Elder Group Home
Wiring Devices
16080-1
3.
Urea or nylon body.
4.
Face color shall be Ivory.
5.
Designated Manufacturers by Device Series:
a.
General Electric
5361-*/5362-* Series
b.
Arrow-Hart
5361-*/5739-* Series
c.
Hubbell
5361-*/5362-* Series
d.
Pass & Seymour
5361-*/5362-* Series
e.
Leviton
5361-*/5362-AG Series
C. 20A GFCI Duplex Receptacles:
1.
Duplex, feed-thru type ground fault current interrupter receptacle with
test/reset buttons.
2.
125V/20A/2P/3W/G rating - NEMA 5-2OR type.
3.
UL #498; UL #943 Class A; NEMA #WD1-4.02.
4.
Urea or nylon body.
5.
Face color shall be Ivory.
6.
Designated Manufacturers by Device Series:
a.
General Electric
GF-8200-* Series
b.
Arrow-Hart
GF-5342-* Series
c.
Pass & Seymour
2091-* Series
d.
Leviton
6898-HG-* Series
e.
Hubbell
GF 8300-* Series
D. Isolated Ground/Transient Voltage Surge Suppressor Receptacle:
1.
15 Ampere, 125 volt, 2 pole, 3 wire:
a.
Wiring Devices
16080-2
Hubbell
IG8200H-*S
Hualapai Nation
Elder Group Home
2.
b.
Pass & Seymour
IG6262-*SP
c.
Leviton
8280IG-*
20 Ampere, 125 volt, 2 pole, 3 wire
a.
Hubbell
IG8300H-*S
b.
Pass & Seymour
IG6362-*SP
c.
Leviton
8380IG-*
E. Guestroom devices (switches and receptacles) shall be residential grade.
F.
Power Receptacles and Special Wiring Devices:
1.
Provide power receptacles and special wiring devices of the type,
rating and/or configuration as indicated.
2.
Match device color and coverplate style to other adjacent devices.
3.
4.
Provide a mating plug for each power receptacle and/or special
receptacle.
Engrave on coverplate circuit voltage/ampacity/poles/wires.
5.
Designated Manufacturers:
G.
a.
General Electric
b.
Arrow-Hart
c.
Hubbell
d.
Pass & Seymour
e.
Leviton
20A Maintained Contact Switches:
1.
Provide toggle or key operated switches as indicated.
2.
Provide SPST, DPST, 3-way or 4-way operation as
indicated.
3.
277V/20A rating, quiet type, maintained contact, urea or nylon
body and a green hexagonal ground screw or ground pigtail, back
Hualapai Nation
Elder Group Home
Wiring Devices
16080-3
and side wired.
2.02
4.
Non-framed face.
5.
Face color shall be Ivory.
6.
Designated Manufacturers by Device Series:
a.
General Electric
5931-* Series
b.
Arrow-Hart
1990-G-* Series
c.
Hubbell
1221-* Series
d.
Pass & Seymour
20AC-* Series
e.
Leviton
1221-* Series
COVERPLATE DESCRIPTION AND MANUFACTURER COVERPLATES
A. Flush Mounted Interior Receptacle/Switch Coverplates:
1.
Single or multi-gang to match device type.
2.
Medium size (4-7/8"), standard depth, smooth finish.
3.
Coverplates shall be ivory to match devices.
B. Flush Mounted Interior GFCI Receptacles:
1.Coverplate shall be Ivory to match devices.
C. Flush Mounted Interior Telephone Outlet Coverplates:
1.
Single or multi-gang to match device configurations.
2.
Medium size (4-7/8"), standard depth, smooth finish.
3.
Ivory color stainless steel.
4.
Split coverplate type with 5/8" I.D. hole.
D. Weatherproof Device Coverplates:
1.
Wiring Devices
16080-4
Weatherproof coverplate meeting UL "wet location/cover closed"
Hualapai Nation
Elder Group Home
requirements to match device configuration.
2.
Hinged and gasketed with spring loaded closers.
3.
Oversized and constructed of stamped 302 stainless steel.
4.
Secured with corrosion-resistant temperproof screws.
E. Lighting Contactor:
1.
2.
Product Description:
a.
Multi-pole contactor for switching branch circuit tung-sten and
ballast lighting and resistant heating loads.
b.
Number of poles as required (paralleling multiple contactors is
acceptable), poles rated for 20 amperes @ 600V continuous duty.
c.
Mechanically held contactor with coil clearing contacts, operating
coil voltage to match circuit characteristics.
d.
Housed in a surface mounted NEMA 1 enclosure with HAND-OFFAUTO selector switch on face.
Designated Manufacturers:
a.
ASCO 917 Series
b.
Square D Class 8903 Type LL Series
PART 3 - EXECUTION
3.01
INSTALLATION COORDINATION:
A. General:
3.02
1.
Coordinate the mounting heights and arrangements prior to
rough-in.
2.
Coordinate with cabinet work and interior furnishings for proper
mounting heights and arrangements.
3.
Install devices after conductors are pulled and painting is completed.
4.
Coordinate the device/coverplate colors and finishes.
PRODUCT APPLICATION:
Hualapai Nation
Elder Group Home
Wiring Devices
16080-5
A. Selection:
3.03
1.
Provide devices of the type and at the locations indicated.
2.
Provide coverplates on all devices.
INSTALLATION
A. General:
1. Mount devices vertically, unless noted otherwise.
2.
Mount switches with UP being the ON position.
3.
Mount receptacles occurring over countertops horizontally.
4.
Where more than one device is indicated at a location, the devices
shall be mounted in a multi-gang box and covered with a single multigang plate.
5.
Coordinate device location with other trades and architectural features.
Do not locate device on two different finishes such as half on wall tile
and half on painted surface.
END OF SECTION 16080
Wiring Devices
16080-6
Hualapai Nation
Elder Group Home