råáîÉêë~ä=aáÖáí~ä=`áåÉã~=mÉÇÉëí~ä
fåëí~ää~íáçå=dìáÇÉ
•
•
•
Manual #: 26-0603100-00
Revision: 01
Universal Digital Cinema Pedestal — Part Number R858605
råáîÉêë~ä=aáÖáí~ä=`áåÉã~=mÉÇÉëí~ä==√==fåëí~ää~íáçå=dìáÇÉ
`çéóêáÖÜí
© Barco. May 21, 2008
All rights reserved. No part of this document may be copied, reproduced or translated. It
shall not otherwise be recorded, transmitted or stored in a retrieval system without the prior
written consent of Barco.
kçíáÅÉ
Barco provides this manual “as is” without warranty of any kind, either expressed or
implied, including but not limited to the implied warranties or merchantability and fitness for
a particular purpose. Barco may make improvements and/or changes to the product(s) and/
or the program(s) described in this publication at any time without notice.
This publication could contain technical inaccuracies or typographical errors. Changes are
periodically made to the information in this publication; these changes are incorporated in
new editions of this publication.
dì~ê~åíÉÉ=~åÇ=`çãéÉåë~íáçå
Barco provides a guarantee relating to perfect manufacturing as part of the legally
stipulated terms of guarantee. On receipt, the purchaser must immediately inspect all
delivered goods for damage incurred during transport, as well as for material and
manufacturing faults Barco must be informed immediately in writing of any complaints.
The period of guarantee begins on the date of transfer of risks, in the case of special
systems and software on the date of commissioning, at latest 30 days after the transfer of
risks. In the event of justified notice of compliant, Barco can repair the fault or provide a
replacement at its own discretion within an appropriate period. If this measure proves to be
impossible or unsuccessful, the purchaser can demand a reduction in the purchase price or
cancellation of the contract. All other claims, in particular those relating to compensation for
direct or indirect damage, and also damage attributed to the operation of software as well
as to other services provided by Barco, being a component of the system or independent
service, will be deemed invalid provided the damage is not proven to be attributed to the
absence of properties guaranteed in writing or due to the intent or gross negligence or part
of Barco.
If the purchaser or a third party carries out modifications or repairs on goods delivered by
Barco, or if the goods are handled incorrectly, in particular if the systems are commissioned
operated incorrectly or if, after the transfer of risks, the goods are subject to influences not
agreed upon in the contract, all guarantee claims of the purchaser will be rendered invalid.
Not included in the guarantee coverage are system failures which are attributed to
programs or special electronic circuitry provided by the purchaser, e.g. interfaces. Normal
wear as well as normal maintenance are not subject to the guarantee provided by Barco
either.
The environmental conditions as well as the servicing and maintenance regulations
specified in this manual must be complied with by the customer.
2
Universal Digital Cinema Pedestal • Installation Guide
qê~ÇÉã~êâë
Brand and product names mentioned in this manual may be trademarks, registered
trademarks or copyrights of their respective holders. All brand and product names
mentioned in this manual serve as comments or examples and are not to be understood as
advertising for the products or their manufactures.
`çãé~åó=^ÇÇêÉëë
Barco, Inc.
11101 Trade Center Drive
Rancho Cordova, California 95670
USA
•
•
•
Phone: (916) 859-2500
Fax: (916) 859-2515
Website: www.barco.com
Barco N.V.
Noordlaan 5
8520 Kuurne
BELGIUM
•
•
•
Phone: +32 56.36.82.11
Fax: +32 56.35.16.51
Website: www.barco.com
léÉê~íçêë=p~ÑÉíó=pìãã~êó
The general safety information in this summary is designed for installation and operating
personnel.
p~ÑÉíó=~åÇ=e~åÇäáåÖ
Use all proper safety and handling practices when installing and operating this product.
dêçìåÇáåÖ=íÜÉ=mêçÇìÅí
A dedicated ground stud is provided at the center of the product, in the bottom. To ensure
safety to all installation and operational personnel, connect a ground wire from this stud to
earth ground, using a wire 14AWG (or larger) in size.
Universal Digital Cinema Pedestal • Installation Guide
3
bèìáéãÉåí=j~êâáåÖ=~åÇ=p~ÑÉíó=qÉêãë=
t^okfkd
Highlights an operating procedure, practice, condition, statement, etc., which, if not strictly
observed, could result in injury to or death of personnel.
Note
Highlights an essential operating procedure, condition or
statement.
`^rqflk
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature
accompanying the appliance.
^sboqfppbjbkq>
Le point d´exclamation dans un triangle equilatéral signale à alerter l´utilisateur qu´il y a
des instructions d´operation et d´entretien tres importantes dans la litérature qui
accompagne l´appareil.
slopf`eq
Ein Ausrufungszeichen innerhalb eines gleichwinkeligen Dreiecks dient dazu, den
Benutzer auf wichtige Bedienungs-und Wartungsanweisungen in der Dem Great
beiliegenden Literatur aufmerksam zu machen.
`Ü~åÖÉ=eáëíçêó
The table below lists the changes to the Universal Digital Cinema Pedestal Installation
Guide.
Table 0-1. Change History
Rev
4
Date
ECP #
Description
Approved By
00
1/09/08
N/A
Universal Digital Cinema Pedestal Installation Guide
A. Gaweda
01.00
5/21/08
554591
Universal Digital Cinema Pedestal Installation Guide Revisions
A. Gaweda
Universal Digital Cinema Pedestal • Installation Guide
q~ÄäÉ=çÑ=`çåíÉåíë
`Ü~éíÉê=N
fåíêçÇìÅíáçå =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= T
In This Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Chapter Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
How to Use This Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Navigating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Table of Contents and Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
About the Universal Digital Cinema Pedestal . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Ordering Part Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
`Ü~éíÉê=O
e~êÇï~êÉ=lêáÉåí~íáçå =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=NN
In This Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Universal Digital Cinema Pedestal Description . . . . . . . . . . . . . . . . . . . . . . . 12
`Ü~éíÉê=P
fåëí~ää~íáçå =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=NR
In This Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Unpacking and Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Site Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adapter Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation and Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Alignment and Leveling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
^ééÉåÇáñ=^=
15
16
16
16
17
18
21
péÉÅáÑáÅ~íáçåëK=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=OP
In This Appendix. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Physical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
^ééÉåÇáñ=_=
`çåí~Åí=fåÑçêã~íáçå=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=OR
In This Appendix. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Return Material Authorization (RMA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contact Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
fåÇÉñ
25
25
25
26
=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=OT
Universal Digital Cinema Pedestal • Installation Guide
5
Table of Contents
6
Universal Digital Cinema Pedestal • Installation Guide
NK==fåíêçÇìÅíáçå
få=qÜáë=`Ü~éíÉê
This chapter introduces you to the Universal Digital Cinema Pedestal Installation Guide.
Areas to be covered are:
•
•
•
•
Chapter Structure
How to Use This Guide
Conventions
About the Universal Digital Cinema Pedestal
`Ü~éíÉê=píêìÅíìêÉ
The following chapters are provided:
•
•
Chapter 1, “Introduction” provides a system overview and a list of features.
•
Chapter 3, “Installation” on page 15 provides Universal Digital Cinema Pedestal
installation instructions.
•
Appendix A, “Specifications” on page 23 lists the Universal Digital Cinema
Pedestal’s specifications.
•
Appendix B, “Contact Information” on page 25 lists important Barco contact,
RMA, warranty and technical support details.
Chapter 2, “Hardware Orientation” on page 11 provides detailed diagrams of the
Universal Digital Cinema Pedestal.
Universal Digital Cinema Pedestal • Installation Guide
7
NK==fåíêçÇìÅíáçå
How to Use This Guide
eçï=íç=rëÉ=qÜáë=dìáÇÉ
This section provides important tips for streamlining your use of this Installation Guide in its
electronic “PDF” form.
k~îáÖ~íáåÖ
Use Acrobat Reader’s “bookmarks” to navigate to the desired location. All chapter files
have the same bookmark structure for instant navigation to any section. Please note:
•
•
Extensive hyperlinks are provided within the chapters.
•
Use the “Previous Page” and “Next Page” buttons to go to the previous or next
page within a file.
•
Use Acrobat’s extensive search capabilities, such as the “Find” tool and “Search
Index” tool to perform comprehensive searches as required.
Use Acrobat’s “Go to Previous View” and “Return to Next View” buttons to trace
your complete navigational path.
q~ÄäÉ=çÑ=`çåíÉåíë=~åÇ=fåÇÉñ
Use the Table of Contents bookmarks to navigate a desired topic. Click any item to
instantly jump to that section of the guide. You can also use the Index to jump to specific
topics within a chapter. Each page number in the Index is a hyperlink.\
`çåîÉåíáçåë=
The following conventions are used throughout this guide:
•
•
•
8
The symbol „ denotes an operations procedure.
The symbol S denotes an example.
Entries written in bold-face capital letters denote physical buttons or chassis
connectors.
Universal Digital Cinema Pedestal • Installation Guide
NK==fåíêçÇìÅíáçå
About the Universal Digital Cinema Pedestal
^Äçìí=íÜÉ=råáîÉêë~ä=aáÖáí~ä=`áåÉã~=mÉÇÉëí~ä
The following topics are discussed in this section:
•
•
•
Overview
Features
Ordering Part Numbers
lîÉêîáÉï
The Universal Digital Cinema Pedestal is an optional component that is used to facilitate
the mounting and installation of Barco DP-series projectors.
Figure 1-1. Universal Digital Cinema Pedestal
The pedestal is designed for the following Barco series digital cinema projectors:
•
•
•
DP-1500
DP-2000
DP-3000 (with the additional adaptor kit)
The pedestal’s design is capable of supporting 600 pounds. It offers a rigid architecture
that supports a single DP-3000 projector, or a dual vertically stacked projector
configuration. Within the pedestal, sufficient venting is provided for a full complement of
rack-mounted processing and switching equipment, such as Barco’s ACS-2048.
Universal Digital Cinema Pedestal • Installation Guide
9
NK==fåíêçÇìÅíáçå
About the Universal Digital Cinema Pedestal
Please note:
•
To ensure trouble-free installation of your Universal Digital Cinema Pedestal,
please review the following sections:
~
~
•
Chapter 2, “Hardware Orientation” on page 11.
Chapter 3, “Installation” on page 15.
Should you have any questions regarding the installation of the Universal Digital
Cinema Pedestal, please consult with the factory. Refer to Appendix B, “Contact
Information” on page 25 for details.
cÉ~íìêÉë
=
Major features of the Universal Digital Cinema Pedestal system are listed below:
•
•
•
•
•
•
•
Supports both single and dual vertically stacked projector configurations.
Provides 17RU of rack space (either in the front or the back of the unit).
Provides a tilting platform with adjustments up to 6 degrees in elevation. An
additional 6 degrees can be achieved by adjusting the pedestal’s leveling feet.
Offers an optional adapter kit for the DP-3000.
Provides removable side panels for ease of access to rack mounted equipment.
Provides a center-stud for common earth ground.
Provides adjustable rear support brackets for rack equipment with extra depth.
lêÇÉêáåÖ=m~êí=kìãÄÉêë
In the US:
•
•
For projectors DP-1500 & DP-2000, order Part Number R858604 (Pedestal US)
For projector D-P3000, order Part Number R858604 (Pedestal US) + R858605
(Adapter Kit US)
Outside the US:
•
•
10
For projectors DP-1500 & DP-2000, order Part Number R9856050 (Pedestal EU)
For projector D-P3000, order Part Number R9856050 (Pedestal EU) + R9856060
(Adapter Kit EU)
Universal Digital Cinema Pedestal • Installation Guide
OK==e~êÇï~êÉ=lêáÉåí~íáçå
få=qÜáë=`Ü~éíÉê
This chapter provides detailed diagrams of the Universal Digital Cinema Pedestal. The
following topics are discussed:
•
Universal Digital Cinema Pedestal Description
Universal Digital Cinema Pedestal • Installation Guide
11
2. Hardware Orientation
Universal Digital Cinema Pedestal Description
råáîÉêë~ä=aáÖáí~ä=`áåÉã~=mÉÇÉëí~ä=aÉëÅêáéíáçå
The figure below illustrates the Universal Digital Cinema Pedestal:
1
4
2
5
3
6
Figure 2-1. Universal Digital Cinema Pedestal
1)
Tilting Platform
3)
Rack Space
5)
Side Panels
2)
Lifting Flange
4)
Tilt Adjustment Latch
6)
Leveling Feet
Following are descriptions of each pedestal section:
1)
Tilting Platform
The Tilting Platform can be adjusted from 0 to 6 degrees in elevation, in 1degree increments. Note that for DP-3000 projectors, the optional Adapter Plate
Kit must be installed, as shown below.
Figure 2-2. Optional DP-3000 Adapter Plate Kit installed
In Chapter 3, refer to the “Adapter Information” section on page 17 for details
2)
Lifting Flange
A Lifting Flange is provided for ease and comfort in lifting the Tilting Platform.
12
Universal Digital Cinema Pedestal • Installation Guide
2. Hardware Orientation
Universal Digital Cinema Pedestal Description
3)
Rack Space
17RU of equipment Rack Space is provided, both in the front and in the back of
the pedestal unit.
Note
4)
For ease of cabling and equipment access, it is
recommended that you install equipment in either the front or
rear rack areas — but not in both.
Tilt Adjustment Latch
Two Tilt Adjustment Latches are provided — one on each side of the Tilting
Platform. To make it easy to set both sides to the same height, the latches are
marked with numbers representing the desired angle.
5)
Side Panels
On each side of the pedestal, removable side panels are provided for ease of
access to all rack mounted equipment.
6)
Leveling Feet
Four adjustable leveling feet are provided. Each can be adjusted with a wrench.
Universal Digital Cinema Pedestal • Installation Guide
13
2. Hardware Orientation
Universal Digital Cinema Pedestal Description
14
Universal Digital Cinema Pedestal • Installation Guide
PK==fåëí~ää~íáçå
få=qÜáë=`Ü~éíÉê
This chapter provides detailed instructions for installing the Universal Digital Cinema
Pedestal. The following topics are discussed:
•
•
•
•
•
•
Safety Precautions
Unpacking and Inspection
Site Preparation
Adapter Information
Installation and Setup
Alignment and Leveling
Universal Digital Cinema Pedestal • Installation Guide
15
3. Installation
Safety Precautions
p~ÑÉíó=mêÉÅ~ìíáçåë=
For all Universal Digital Cinema Pedestal installation procedures, observe the following
important safety and handling rule to avoid damage to yourself and the equipment:
Important
A dedicated ground stud is provided at the center of the unit,
in the bottom. To ensure safety to installation and operations
personnel, connect a ground wire from this stud to earth
ground, using a wire 14AWG or larger in size.
råé~ÅâáåÖ=~åÇ=fåëéÉÅíáçå=
„ To unpack and inspect the Universal Digital Cinema Pedestal:
1.
Inspect the shipping box for damage. If you find any damage, notify the shipping
carrier immediately for all claims adjustments.
2.
As you open the box, compare its contents against the packing slip. If you find
any shortages, contact your Barco sales representative.
3.
Remove and discard any straps, cardboard cover, and the carton from the
pedestal. If the shipment includes the optional large projector platform and kit,
also unpack those items.
4.
Once you have removed all the components from their packaging and checked
that all the listed components are present, visually inspect the unit itself to ensure
there was no damage during shipping. If there is damage, notify the shipping
carrier immediately for all claims adjustments.
Important
Leave the pedestal on its pallet/skid, and leave the leveling
feet fully retracted until the pedestal is placed near its final
installation point. Do not extend the leveling feet until the unit
is in place, including being lifted onto a platform, stand, or
plinth, if applicable.
páíÉ=mêÉé~ê~íáçå=
The environment in which you install your Universal Digital Cinema Pedestal should be
clean, properly lit, free from static, and have adequate power, ventilation, and space for all
components.
16
Universal Digital Cinema Pedestal • Installation Guide
3. Installation
Adapter Information
^Ç~éíÉê=fåÑçêã~íáçå
The table below provides information regarding supplied or optional adapters:
Table 3-1. Universal Digital Cinema Pedestal Adapters
Adapter
Description
Quantity
Adapter Plate Kit (US)
PN R858605, Optional Adapter Plate Kit for DP-3000 projectors
Option
Adapter Plate Kit (EU)
PN R9856060, Optional Adapter Plate Kit for DP-3000 projectors
Option
The figure below illustrates the optional Adapter Plate Kit, as installed on the pedestal.
Figure 3-1. Optional Adapter Plate Kit Installed
Universal Digital Cinema Pedestal • Installation Guide
17
3. Installation
Installation and Setup
fåëí~ää~íáçå=~åÇ=pÉíìé
„ Use the following steps to install the Universal Digital Cinema Pedestal:
Caution
1.
2.
Do not attempt to install a projector on top of a pedestal which
has sustained structural damage, as the pedestal may be
unstable or unsafe. If this condition occurs, please contact
Barco for assistance.
Move the pedestal to its final location. Please note:
~
Get the pedestal as close to the final location as possible, before taking it
off the pallet.
~
Prior to placing the Universal Digital Cinema Pedestal in its final location,
do not install any equipment in the pedestal’s rack area, and do not
install a projector on top of the pedestal. The pedestal is not intended to
be moved after equipment has been installed into or onto it.
When placing the pedestal in position, keep in mind the relative locations of the
nearby equipment racks or other system components that will be installed.
Please note:
3.
~
To allow for the overhang of the projector lens, always allow sufficient
room between the front of the pedestal and any walls or projection ports.
This will usually be a minimum of 12 inches (30 cm).
~
Allow additional space if 3D attachments or a large model projector is to
be used (e.g., DP90, DP3000).
Prior to mounting a projector on the pedestal or loading any equipment into its
rack area, extend the leveling feet far enough so that they can easily be adjusted
with a wrench later. It is recommended that you extend the feet approximately 1
inch or 25mm, as shown below.
Figure 3-2. Leveling feet
4.
At the time of shipment, a locknut is located on each foot, on the inside of the
base. Remove the four side covers to access the locknuts. Please note:
~
18
If the leveling feet are to be extended substantially, the locknut may be
relocated to the bottom, below the base. This will require removing and
reinstalling each foot.
Universal Digital Cinema Pedestal • Installation Guide
3. Installation
Installation and Setup
~
Extending the feet may require tipping the unit up on one side (which is
why this step should be done before adding equipment to the pedestal).
Do not attempt the final leveling of the pedestal at this time,
as that procedure will be done once a projector is installed.
Important
5.
If a smaller model projector is used, skip this step. If a large projector is used
(e.g., DP-90 or DP-3000), perform the following steps to install the Adapter Kit:
a.
Install the adapter plate on top of the pedestal with the supplied
hardware.
b.
Remove the backing from the four rubber pads provided with the
pedestal, and attach them in the four corners of the adapter plate.
c.
If you want to install the DP-3000’s lamp power supply (LPS) inside the
pedestal, perform the following steps.
Use the figure below for reference:
3
1
2
Figure 3-3. Inside view of Pedestal, showing panel installation locations
•
Remove the side panels from the pedestal.
•
Install the supplied 9RU Blank Panel on the inside of the
pedestal at location (1).
•
Install the supplied 2.2RU Blank Panel on the inside of the
pedestal at location (2).
•
Install the supplied top cover on the inside of the pedestal at
location (3).
•
Before installing the LPS, remove the top carrying handles from
the LPS chassis. Note that you may need to relocate the AC
power cable through the alternate side knockout on the LPS.
Universal Digital Cinema Pedestal • Installation Guide
19
3. Installation
Installation and Setup
6.
Four rubber pads ship with each pedestal. Three of the pads are used with
smaller projectors (i.e. DP-1500 or DP-2000). Remove the backing from each
pad and install as shown below, arrows 'A'.
Figure 3-4. Pedestal top view
Please note:
~
~
Ensure that the top surface is clean and dry prior to attaching the pads.
Cleaning the surface with Isopropyl alcohol prior to attaching the pads
will promote adhesion.
7.
For smaller projector models, a knockout is provided to allow passage of the
power cord at the rear corner of the pedestal. Remove the knockout at this time, if
applicable. (See Figure 3-3, 'B' arrow).
8.
If you wish to install rack equipment that is extra deep, four adjustable brackets
are provided. On the inside rack rails, install these brackets as desired using the
supplied mounting hardware.
Figure 3-5. Adjustable rear support brackets, sample locations
20
Universal Digital Cinema Pedestal • Installation Guide
3. Installation
Alignment and Leveling
9.
Ensure that the pedestal is located where it will remain prior to loading any
equipment, including being placed on top of any platform, blocks, stand, plinth,
etc. At this point, you may load equipment into the rack area and install the
projector on top of the pedestal.
^äáÖåãÉåí=~åÇ=iÉîÉäáåÖ
Side-to-side leveling is accomplished by adjusting the leveling feet. There are two ways to
adjust the front-to-rear tilt angle:
•
Coarse adjustment is performed adjusting the Tilting Platform downward from
zero to 6 degrees, in 1-degree increments.
•
Fine tilt adjustment is performed with the leveling feet.
Note
The vertical lens shift capability on the projector may be used
for fine tilt adjustments.
Five degrees of tilting capability is provided by the leveling feet, which when combined with
the six degrees available by adjusting the Tilting Platform, provides more than 10 degrees
of total downward tilt capability.
Note
Upward tilt capability is limited to the 5 degrees provided by
the feet
„ To level the projector:
1.
Turn on the projector.
2.
Select a test pattern that includes marks for the full extent of the image to be used.
3.
Adjust the zoom setting on the lens to a setting that approximately fills the screen.
4.
Ensure that the pedestal and projector are stable, e.g., all four feet are in contact
with the floor, so that the system doesn't wobble from side-to-side.
5.
Adjust one or two of the feet until the unit is stable and the image is approximately
level from side-to-side — that is, the left and right lower corners of the image are
equidistant from the floor, and the left and right upper corners are equidistant from
the ceiling.
6.
Check if the left side of the image is a different overall height than the right side of
the image (as measured from the top to the bottom of the image). If so, you must
reposition the pedestal and adjust the horizontal offset of the lens to correct for
keystone (see the projector manual for adjusting lens offset).
7.
Once all four corners of the image are equidistant at the top and bottom, adjust
the tilt angle of the pedestal to correspond to the angle required.
Universal Digital Cinema Pedestal • Installation Guide
21
3. Installation
Alignment and Leveling
a.
Ensure that bolts 'C' and 'D' are loosened on both sides of the pedestal
as shown below.
Figure 3-6. Bolt locations
b.
From the rear of the pedestal, lift the Tilting Platform until the latches on
both sides engage in the desired position. To make it easy to set both
sides the same, the latches are marked with numbers representing the
desired angle.
c.
Once the desired angle is reached, tighten the 'C' and 'D' bolts for
maximum stability and safety.
Caution
22
When lifting and tilting the platform, keep your hands near the
center of the lifting flange. This flat flange is provided for
ease and comfort in lifting. Keep your hands and fingers
away from the extreme right and left sides, as a potential
pinch hazard may exist.
Universal Digital Cinema Pedestal • Installation Guide
^K==péÉÅáÑáÅ~íáçåë
få=qÜáë=^ééÉåÇáñ
This appendix provides detailed technical specifications for the Universal Digital Cinema
Pedestal. The following topics are discussed:
•
Physical Specifications
Universal Digital Cinema Pedestal • Installation Guide
23
^K==péÉÅáÑáÅ~íáçåë
Physical Specifications
mÜóëáÅ~ä=péÉÅáÑáÅ~íáçåë=
The table below lists Universal Digital Cinema Pedestal physical specifications.
Table A-1. Universal Digital Cinema Pedestal physical specifications.
Parameter
Mechanical
Detail
Chassis
Specification
H: 33.87 inches (86.02 cm)
W: 34.00 inches (86.36 cm)
D: 22.00 inches (55.88 cm)
Tilt
Distance: floor to optical axis
Course adjustment
Platform adjusts from 0 to 6 degrees, in 1-degree increments
Fine adjustment
Leveling feet adjust from 0 to 5 degrees
DP2000
18.34 inches (466 mm), 18cm thread, feet fully out
13.11 inches (333 mm), feet fully in
Rack height
DP2000 Rack
34.88 inches (885.9 mm), feet fully retracted
40.43 inches (1027 mm), feet fully extended
Note: feet are 6.0 inches (152 mm) long, engaged thread,
lock nut relocated under rack
Max height of optical axis
DP2000 + Pedestal
58.77 inches (1493 mm), as measured from ground
Note: any tilt applied via front foot rack adjustments or head
(retracting), decreases height of optical axis
Weight
200 lbs (90.71 kg)
Shipping Weight
216 lbs (97.97 kg)
The table below lists the optional Adapter Plate physical specifications.
Table A-2. Optional Adapter Plate physical specifications.
Parameter
Mechanical
Detail
Adapter Plate
Specification
H: 0.75 inches (1.90 cm)
W: 40.50 inches (102.87 cm)
D: 28.75 inches (73.02 cm)
Weight
24
37 lbs (16.78 kg)
Universal Digital Cinema Pedestal • Installation Guide
_K==`çåí~Åí=fåÑçêã~íáçå
få=qÜáë=^ééÉåÇáñ
The following topics are discussed in this Appendix:
•
•
•
Warranty
Return Material Authorization (RMA)
Contact Information
t~êê~åíó
All video products are designed and tested to the highest quality standards and are backed
by a full 3-year parts and labor warranty. Warranties are effective upon delivery date to
customer and are non-transferable. Barco warranties are only valid to the original
purchaser/owner. Warranty related repairs include parts and labor, but do not include faults
resulting from user negligence, special modifications, lightning strikes, abuse (drop/crush),
and/or other unusual damages.
The customer shall pay shipping charges when unit is returned for repair. Barco will cover
shipping charges for return shipments to customers.
oÉíìêå=j~íÉêá~ä=^ìíÜçêáò~íáçå=Eoj^F
In the unlikely event that a product is required to return for repair, please call the following
number and ask for a Sales Engineer to receive a Return Merchandise Authorization
number (RMA).
•
(888) 414-7226 (North America only)
RMA Conditions are listed below:
a.
Prior to returning any item, you must receive a Return Merchandise
Authorization (RMA) number.
b.
All RMA numbers must appear on their return-shipping label.
c.
RMA numbers are valid for ten (10) days from issue date.
d.
All shipping and insurance charges on all RMAs must be prepaid by the
customer
Universal Digital Cinema Pedestal • Installation Guide
25
_K==`çåí~Åí=fåÑçêã~íáçå
Contact Information
`çåí~Åí=fåÑçêã~íáçå
Barco, Inc.
11101 Trade Center Drive
Rancho Cordova, California 95670
USA
•
•
•
Phone: (916) 859-2500
Fax: (916) 859-2515
Website: www.barco.com
Sales Contact Information
•
•
•
Direct: (916) 859-2505
Toll Free: (888) 414-7226
E-mail: folsomsales@barco.com
Barco N.V.
Noordlaan 5
8520 Kuurne
BELGIUM
•
•
•
26
Phone: +32 56.36.82.11
Fax: +32 56.35.16.51
Website: www.barco.com
Universal Digital Cinema Pedestal • Installation Guide
fåÇÉñ
^
b
Acrobat usage . . . . . . . . . . . . . . . . . . . . . . . . . .8
navigating and searching . . . . . . . . . . . . . .8
ACS-2048 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Adapter information . . . . . . . . . . . . . . . . . . . . .17
Adapter Plate Kit . . . . . . . . . . . . . . . . . . . .10, 17
Earth ground . . . . . . . . . . . . . . . . . . . . . . . . . .10
Equipment marking terms . . . . . . . . . . . . . . . . .4
_
Features, Digital Cinema Pedestal . . . . . . . . .10
Barco
contact information . . . . . . . . . . . . . . . . . .26
DP-series projectors . . . . . . . . . . . . . . . . . .9
sales contact information . . . . . . . . . . . . .26
warranty . . . . . . . . . . . . . . . . . . . . . . . . . .25
`
Change history . . . . . . . . . . . . . . . . . . . . . . . . .4
Chapter structure . . . . . . . . . . . . . . . . . . . . . . . .7
Common earth ground . . . . . . . . . . . . . . . . . . .10
Contact information . . . . . . . . . . . . . . . . . . . . .26
Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
a
Digital Cinema Pedestal
features . . . . . . . . . . . . . . . . . . . . . . . . . .10
hardware installation . . . . . . . . . . . . . . . . .15
hardware orientation . . . . . . . . . . . . . . . . . 11
how to install . . . . . . . . . . . . . . . . . . . . . . .18
introduction to . . . . . . . . . . . . . . . . . . . . . . .7
specifications . . . . . . . . . . . . . . . . . . . . . .23
Documentation conventions and symbols . . . . .8
DP-1500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
DP-2000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
DP-3000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
adapter kit . . . . . . . . . . . . . . . . . . . . . . . . .10
DP-series projectors . . . . . . . . . . . . . . . . . . . . .9
c
d
Guarantee and compensation . . . . . . . . . . . . . .2
e
Hardware
installation . . . . . . . . . . . . . . . . . . . . . . . .15
orientation . . . . . . . . . . . . . . . . . . . . . . . . . 11
History, change . . . . . . . . . . . . . . . . . . . . . . . . .4
How to
install Digital Cinema Pedestal . . . . . . . . .18
level the projector . . . . . . . . . . . . . . . . . . .21
unpack and inspect pedestal . . . . . . . . . .16
use this guide . . . . . . . . . . . . . . . . . . . . . . .8
Hyperlinks . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
f
Information, adapters . . . . . . . . . . . . . . . . . . . .17
Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
hardware . . . . . . . . . . . . . . . . . . . . . . . . .15
safety precautions . . . . . . . . . . . . . . . . . .16
site preparation . . . . . . . . . . . . . . . . . . . . .16
unpacking and inspection . . . . . . . . . . . . .16
Introduction to Digital Cinema Pedestal . . . . . . .7
Universal Digital Cinema Pedestal • Installation Guide
27
Index
i
r
Level projector . . . . . . . . . . . . . . . . . . . . . . . . .21
Leveling feet . . . . . . . . . . . . . . . . . . . . . . . . . .13
Lifting flange . . . . . . . . . . . . . . . . . . . . . . . . . .12
Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
k
Notice
t
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
l
Operators safety summary . . . . . . . . . . . . . . . .3
Ordering part numbers . . . . . . . . . . . . . . . . . . .10
Orientation, hardware . . . . . . . . . . . . . . . . . . . 11
m
Part numbers . . . . . . . . . . . . . . . . . . . . . . . . . .10
PDF file usage . . . . . . . . . . . . . . . . . . . . . . . . . .8
navigating and searching . . . . . . . . . . . . . .8
o
Rack space . . . . . . . . . . . . . . . . . . . . . . . .10, 13
Return material authorization . . . . . . . . . . . . . .25
RMA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
p
Safety
precautions . . . . . . . . . . . . . . . . . . . . . . . .16
summary . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Sales contact information . . . . . . . . . . . . . . . .26
Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Side panels . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Site preparation . . . . . . . . . . . . . . . . . . . . . . . .16
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . .23
Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
q
Terms, equipment marking . . . . . . . . . . . . . . . .4
Tilt adjustment latches . . . . . . . . . . . . . . . . . . .13
Tilting platform . . . . . . . . . . . . . . . . . . . . . .10, 12
Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
28
Universal Digital Cinema Pedestal • Installation Guide