LCAT24 SECURITY LIGHTING™ 2' × 4' LED Contemporary Architectural Troffer PROJECT INFORMATION Project Name Type Catalog No. Date CONSTRUCTION Luminaire housing, reflectors and end caps are die formed code gauge cold rolled steel. High transmission extruded acrylic enclosed lens features linear prisms with custom frost for high efficacy without pixelation. FEATURES • Attractive architectural center lens • High efficiency acrylic center lens features linear prisms for high performance without pixelation • Appropriate for offices, schools, medical, and public spaces • High performance reflector with matte white paint standard • 60,000 hour LEDs at L80 (up to 150,000 projected life) for reduced maintenance • Four LED color choices in 80 or 90 CRI • Eight lumen packages • Multiple driver options to satisfy different applications • LED modules and electrical accessible from below • Optional architecturally styled integration of daylight and occupancy sensor(s) • QR code traceability • Integral battery pack optional on most models • Compatible with Dual-Lite inverters • Recessed, surface or cable mount • Air return option • DesignLights Consortium® (DLC) qualified • Five year warranty (Terms and Conditions apply) CERTIFICATION All luminaires are built to UL1598 and 2108 standards, and bear appropriate CSA labels. Damp location is standard. Emergency-equipped fixtures labeled UL 924 and Dry Location unless specified. Adheres to LM79, LM80, and TM21 industry standards. DesignLights Consortium® (DLC) qualified. Please refer to the DLC website for specific product qualifications at www.designlights.org. SHIELDING Removable lens for easy access to LED module and electrical components. IC RATING IC label is standard for recessed products. Note that IC label is void if product is installed on site with a combination of both step-dimming (ESD) driver plus through wiring or for air return fixtures. FINISH All reflective surfaces are finished after fabrication with unique formula high reflectivity matte white paint for soft, uniform indirect illumination. INSTALLATION An access plate is furnished with each luminaire for fast wiring access without the necessity to open the fixture or wireway. CEILING COMPATIBILITY Luminaire fits recessed exposed Grid ceilings (G); four integral NEC compliant T-bar clips are standard. Can be placed in Slot Grid (SG) style ceiling with regress 3⁄8" above ceiling plane. A Flange Kit (FK) accessory is available for recessed hard ceiling applications. Surface Mount (SM) option allows placement below ceiling plane. Cable Mount (CM) option allows suspension below ceiling plane. ORDERING INFORMATION LCAT 24 MODEL Blank >80 9 >90 SIZE – COLOR TEMPERATURE 30 35 40 50 3000K 3500K 4000K 5000K1 24 2' × 4' PRODUCT AVAILABILITY 24 24 24 24 24 24 24 24 LUMEN PACKAGE XW VW MW LW ML HL VL XL NOMINAL NOMINAL LUMENS LUMENS WATTS PER WATT 2600-2800 24 110-119 3200-3450 30 107-116 3500-3800 33 107-116 4100-4700 40 103-117 4400-5150 40 110-129 5350-6200 47 114-132 6800-7800 65 105-121 7800-9250 80 92-110 Nominal lumen range represents 3000K through 5000K. Lumens vary according to color temperatures and other factors. See specific photometric test(s). Page 1/3 Rev. 08/04/16 EXAMPLE LCAT24-35MLG-ESDU – CRI LCAT LED Contemporary Architectural Troffer WARRANTY Five year warranty (Terms and Conditions apply). – CEILING TYPE AIR FUNCTION VOLTAGE G Grid Lay-in2 SM Surface Mount3 CM Cable Suspended Mount3,4 Blank Static A Air Return Side Slots U 120V-277V 347 347V LUMEN OUTPUT XW Extra Low Watt VW Very Low Watt MW Medium Low Watt LW Low Watt ML Medium Lumen HL High Lumen VL Very High Lumen XL Extra High Lumen See Product Availability Table below. 2X4 E ED ED1 ESD LUT5 LUTH OPTIONS ELL14 C388 C488 C588 GLR NYC EOR Emergency Battery Pack Installed, 1400 Lumens5,6 3-Wire Flex 4-Wire Flex 5-Wire Flex Fast Blow Fuse NYC Compliant End of Row (SM and CM only. Provides end wiring access for continuous row mounting.)3 INT Intermediate (SM and CM only. Provides ends with wiring access for continuous row mounting.)3 CP Chicago Plenum ODP Occupancy and Daylight Sensors, Philips5,7 DRIVER E ESD ED ED1 LUTH Fixed Output Step Dimming5 0-10V Dimming 0-10V 1% Dimming Lutron H Series 1% Dimming5,6 LUT5 Lutron 5 Series 5% Dimming5,6 ACCESSORIES (ORDER SEPARATELY) DRIVER AVAILABILITY TABLE XW X X X X X VW X X X MW X X X LW ML HL X X X X X X X X X X X X X X X X X X X X LUT5 and LUTH not available in 347V Web: www.securitylighting.com 2100 Golf Road, Suite 460, Rolling Meadows, IL 60008-4704 Phone: 1-800-LIGHT IT, 1-800-544-4848, Fax: 847-279-0642 Copyright ©2016 Security Lighting, a division of Hubbell Lighting, Inc. All Rights Reserved. • Specifications subject to change without notice. • Printed in U.S.A. • SL0073 08/16 VL X X X X XL X X X X FK24 2' × 4' Single Flange Kit (Shipped separately) CM48Y2SC3F-KIT 48" Cable Mount Kit for 2' wide Cable Mount fixtures, 3 Wire Not available in 90 CRI. For drywall, order G with Flange Kit Accessory. Not available with Air Return (A) air function 4 Order hanger accessories separately 5 Not available in 347V 6 For compatability with Dual-Lite LiteGear® inverters, contact Hubbell Lighting Representative 7 Only available with 0-10V Dimming (ED) Driver Option. For questions about configuration options, contact Hubbell Representative. LED / LCAT24 1 2 3 LCAT24 SECURITY LIGHTING™ 2' × 4' LED Contemporary Architectural Troffer PHOTOMETRIC DATA LUMINAIRE DATA Luminaire Ballast Ballast Factor Lamp Fixture Lumens Watts Mounting Shielding Angle Spacing Criterion Luminous Opening in Feet Test LCAT24-35LWG-EDU Test Date 12/15/2014 ZONAL LUMEN SUMMARY LCAT24-35LWG-EDU LCAT Led Architectural Troffer, Recessed Architectural 2 x 4 led with frosted linear prismed lens D10CC55UNVTZ-C 1.00 LED 4170 39.70 Recessed 0º = 90 90º = 90 0º = 1.21 90º = 1.31 Length: 3.94 Width: 1.88 Height: 0.00 Zone 0-30 INDOOR CANDELA PLOT Lumens % Lamp % Fixt. 1062 25.5 25.5 0-40 1739 41.7 41.7 0-60 3100 74.4 74.4 0-90 4170 100.0 100.0 0-180 4170 100.0 100.0 90 75 700 ENERGY DATA 60 Total Luminaire Efficiency 100.0% Total Lumens per Watt IESNA RP-1-2004 Compliance Comparative Yearly Lighting Energy Cost per 1000 Lumens 105 Non-Compliant $2.31 based on 3000 hrs. and $0.08 per KWH 1400 0 15 0.0 30 Horiz 0-180 45 45.0 90.0 Test LCAT24-35MLG-EDU Test Date 1/14/2015 LUMINAIRE DATA Luminaire Ballast Ballast Factor Lamp Fixture Lumens Watts Mounting Shielding Angle Spacing Criterion Luminous Opening in Feet ZONAL LUMEN SUMMARY LCAT24-35MLG-EDU LCAT Led Architectural Troffer, Recessed Architectural 2 x 4 led with frosted linear prismed lens D10CC55UNVTZ-C 1.00 LED 4790 39.80 Recessed 0º = 90 90º = 90 0º = 1.21 90º = 1.33 Length: 3.92 Width: 1.90 Height: 0.00 Zone INDOOR CANDELA PLOT Lumens % Lamp % Fixt. 0-30 1198 25.0 0-40 1967 41.1 41.1 0-60 3526 73.6 73.6 0-90 4790 100.0 100.0 0-180 4790 100.0 100.0 90 25.0 75 800 ENERGY DATA 60 Total Luminaire Efficiency 100.0% Total Lumens per Watt IESNA RP-1-2004 Compliance Comparative Yearly Lighting Energy Cost per 1000 Lumens 120 Non-Compliant $2.00 based on 3000 hrs. and $0.08 per KWH 1600 0 15 0.0 30 Horiz 0-180 45.0 45 90.0 Test LCAT24-35HLG-EDU Test Date 1/14/2015 LUMINAIRE DATA Luminaire Ballast Ballast Factor Lamp Fixture Lumens Watts Mounting Shielding Angle Spacing Criterion Luminous Opening in Feet ZONAL LUMEN SUMMARY LCAT24-35HLG-EDU LCAT Led Architectural Troffer, Recessed Architectural 2 x 4 led with frosted linear prismed lens D10CC55UNVTZ-C 1.00 LED 5587 47.20 Recessed 0º = 90 90º = 90 0º = 1.21 90º = 1.33 Length: 3.92 Width: 1.90 Height: 0.00 Zone INDOOR CANDELA PLOT Lumens % Lamp % Fixt. 0-30 1397 25.0 0-40 2293 41.0 41.0 0-60 4112 73.6 73.6 0-90 5587 100.0 100.0 0-180 5587 100.0 100.0 90 25.0 75 900 ENERGY DATA 60 Total Luminaire Efficiency 100.0% Total Lumens per Watt IESNA RP-1-2004 Compliance Comparative Yearly Lighting Energy Cost per 1000 Lumens 118 Non-Compliant $2.02 based on 3000 hrs. and $0.08 per KWH 1800 0 15 0.0 Page 2/3 Rev. 08/04/16 Web: www.securitylighting.com 2100 Golf Road, Suite 460, Rolling Meadows, IL 60008-4704 Phone: 1-800-LIGHT IT, 1-800-544-4848, Fax: 847-279-0642 Copyright ©2016 Security Lighting, a division of Hubbell Lighting, Inc. All Rights Reserved. • Specifications subject to change without notice. • Printed in U.S.A. • SL0073 08/16 30 Horiz 0-180 45.0 45 90.0 LED / LCAT24 SECURITY LIGHTING™ 8 8 DIMENSIONAL DATA — GRID 7 7 LCAT24 2' × 4' LED Contemporary Architectural Troffer GRID, STATIC 6 5 6 5 4 4 3 REV 3 DATE A 09/01/15 REV DATE A 09/01/15 2 1 RECORD2 DESN CHCK EC 1 DRAWING CREATED DESN CAB CHCK XXX XXXXX RECORD EC DRAWING CREATED CAB XXX XXXXX D D 4" 24" Recessed Section (G) C C Back of Housing, Grid GRID, AIR RETURN 24" B B NOTES: UNLESS OTHERWISE SPECIFIE NOTES: OTHERWISE SPECIFIE 1. DEBURRUNLESS AND BREAK SHARP CORNERS. 48" 1. FOR DEBURR AND BREAK SHARP CORNERS. 2. DIMENSIONS NOT SHOWN REFER TO 3D MODEL. 2. FOR DIMENSIONS NOT SHOWN REFER TO 3D CRITICAL DIMENSIONS CEILING COMPATIBILITY Type G UNSPECIFED TOLERANCES: INCHES MODEL. CRITICAL DIMENSIONS u0.030 X.XX= u0.015 X.XXX=u0.005 X.X= 1/64 ANGULAR TOLERANCE= u2v FRACTIONS= UNSPECIFEDuTOLERANCES: INCHES X.XX=u0.015 DRAWN: X.XXX=u0.005 X.X=u0.030IN INCHES DIMENSIONS 03/06/15 TOLERANCE=u2v FRACTIONS=u1/64 ANGULAR DIMENSIONS IN [ ] IN MM cblankenship DRAWN: BY: DIMENSIONSTO IN ASME INCHES 03/06/15 CONFORMS Y14.5M CHECKED A A FK24 Flange Kit DIMENSIONS IN PRINT [ ] IN MM DO NOT SCALE FKCR CONFORMS TO ASME Y14.5M DO NOT SCALE PRINT -cblankenship - -- -- CHECKED BY: ENGINEERING: ENGINEERING: CATALOG NO. Side End For lay-in installation in exposed grid ceilings. Maximum tee widths of 1" and maximum tee heights of 2" allowed. Side 8 7 6 5 4 8 7 6 5 4 THIRD ANGLE PROJECTION THIRD ANGLE PROJECTION - 3 End For hard ceiling applications, order FK24 flange kit. Flange kit wires directly into concealed ceiling opening for a clean, finished appearance. For flanged fixtures in row configurations, the FKCR adapter bracket kit is required in addition to the FK24 kit. Order one less FKCR than the total number of fixtures in row. (Example: Row of two, order (2) FK24 & (1) FKCR) Row cut out dimensions using FK24s & FKCR adapters: Width 243/8", Length [48" × (# in row)] + 3/8". Example: (48" × 2) + 3/8" = 963/8" Flange kit cut out dimension for single unit only: 243/8" × 483/8" DIMENSIONAL DATA — SURFACE MOUNT OR CABLE MOUNT, STATIC ONLY Surface Section (SM) 4 5/8" 25" Back of Housing, Surface Mount (SM) and Cable Mount (CM) 1 13/16" 45 5/16" B B 1 5/8" A A 1 1/2" A A 12 7/16" B B 49" Surface Mount: Order SM ceiling type. Mounting collar required for surface mounting. (4) Mounting knock-outs, 3⁄8", provided in center channel as indicated at left, marked A. Cable Mount: Order CM ceiling type. Use CM48Y2SC3F-KIT 48" Cable Mount Kit for 2' wide CM trim fixtures. Mounting holes are provided in diagonal straps shown at left, marked B. 5 3/16" For Cable Mount a 2" x 3" access plate with (4) 7⁄8" KOs provided in place of Mounting Collar shown. NOTE: All dimensions are in inches; dimensions and specifications are subject to change without notice. Please consult factory or check sample for verification. * Web: www.securitylighting.com 2100 Golf Road, Suite 460, Rolling Meadows, IL 60008-4704 Phone: 1-800-LIGHT IT, 1-800-544-4848, Fax: 847-279-0642 Copyright ©2016 Security Lighting, a division of Hubbell Lighting, Inc. All Rights Reserved. • Specifications subject to change without notice. • Printed in U.S.A. • SL0073 08/16 - CATALOG NO. 3 - - This document contains confidential and proprietary information of C Lighting, a division of Hubbell Lighting, Inc. (HLI). Receipt or posse document does not convey any rights to reproduce or disclose its c make, use , or sell anything it may disclose. Reproduction, disclosu This document contains confidential and proprietary information of C document its contents, without the specific written authorization Lighting, a or division of Hubbell Lighting, Inc. (HLI). Receipt or posseo violate the does intellectual property document not convey anyrights rightsoftoHLI. reproduce or disclose its c make, use , or sell anything it may disclose. Reproduction, disclosu document or its contents, without the specific written authorization o violate the intellectual property rights of HLI. INST-ASSY LCAT 14/22/24 SIMILAR TO: MATERIAL: FINISH: INST-ASSY LCAT 14/22/24 Error: No reference MATERIAL: SIZE SCALE PV:1 SCALE PV:1 B B SIZE 2 930577 FINISH: DRAWING NO. SIMILAR TO: REV. DRAWING NO. REV. Error: No reference 2 93057735 93057735 A A SHT 2 930577 2 SHTS SHT 2 1 2 SHTS 1