LTGR24 2' × 4' LED Specification Grade Architectural Recessed PROJECT INFORMATION FEATURES • Two architecturally styled lens options • Wide lens design reduces glare and provides lower contrast ratio between lens and reflectors • High efficiency acrylic center lens features linear prisms for high performance without pixelation • Appropriate for offices, schools, medical, and public spaces • High performance reflector with matte white paint standard • 60,000 hour LEDs at L80 (up to 150,000 projected life) for reduced maintenance • Four LED color choices and 80 CRI • Eight lumen packages • Multiple driver options to satisfy different applications • LED modules and electrical accessible from below • QR code traceability • Integral battery pack optional on most models • Compatible with Dual-Lite inverters • Recessed, surface or cable mount • Air return option • DesignLights Consortium® (DLC) qualified; see www.designlights.org • Five year warranty (Terms and Conditions apply) Project Name Type Catalog No. Date CONSTRUCTION Luminaire housing, reflectors and end caps are die formed code gauge cold rolled steel. High transmission extruded acrylic enclosed lens features linear prisms with custom frost for high efficacy without pixelation. CERTIFICATION All luminaires are built to UL1598 and 2108 standards, and bear appropriate CSA labels. Damp location is standard. Emergency-equipped fixtures labeled UL 924 and Dry Location unless specified. Adheres to LM79, LM80, and TM21 industry standards. SHIELDING Removable lens for easy access to LED module and electrical components. IC RATING IC label is standard for recessed products. Note that IC label is void on VL and XL if product is installed on site with through wiring or for air return fixtures. FINISH All reflective surfaces are finished after fabrication with unique formula high reflectivity matte white paint for soft, uniform indirect illumination. WARRANTY Five year warranty (Terms and Conditions apply). INSTALLATION An access plate is furnished with each luminaire for fast wiring access without the necessity to open the fixture or wireway. CEILING COMPATIBILITY Luminaire fits recessed exposed Grid ceilings (G); four integral NEC compliant T-bar clips are standard. Can be placed in Slot Grid (SG) style ceiling with regress 3⁄8" above ceiling plane. A Flange Kit (FK) accessory is available for recessed hard ceiling applications. Surface Mount (SM) option allows placement below ceiling plane. Cable Mount (CM) option allows suspension below ceiling plane. ORDERING INFORMATION LTGR 24 MODEL COLOR TEMP LTGR LED Specification Grade Recessed Architectural 30 35 40 50 – 3000K 3500K 4000K 5000K EXAMPLE LTGR24-35MLG-R-ESDU – LUMEN OUTPUT XW Extra Low Watt VW Very Low Watt – SHIELDING R Rectangular C Curve Page 1/3 Rev. 06/30/16 © 2016 Columbia Lighting, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Website www.columbialighting.com ELL14 C388 C488 C588 GLR CP NYC EOR Emergency Battery Pack Installed, 1400 Lumens4,5 3-Wire Flex 4-Wire Flex 5-Wire Flex Fast Blow Fuse Chicago Plenum NYC Compliant End of Row (SM and CM only. Provides end wiring access for continuous row mounting.)2 INT Intermediate (SM and CM only. Provides ends with wiring access for continuous row mounting.)2 Fixed Output Step Dimming4 0-10V Dimming 0-10V 1% Dimming Lutron H Series 1% Dimming4,5 LUT5 Lutron 5 Series 5% Dimming4,5 MW Medium Low Watt CEILING TYPE LW Low Watt G Grid Lay-in1 ML Medium Lumen SM Surface Mount2 SIZE HL High Lumen CM Cable Suspended 24 2' × 4' VL Very High Lumen Mount2,3 XL Extra High Lumen AIR FUNCTION VOLTAGE See Product Availability Table below. Blank Static U 120V-277V PRODUCT AVAILABILITY A Air Return Side Slots 347 347V SIZE LUMEN NOMINAL NOMINAL LUMENS 2X4 DRIVER AVAILABILITY TABLE PACKAGE LUMENS WATTS PER WATT XW VW MW LW ML HL VL XL 24 XW 2475-2675 21 118-128 E X X X X X X X X 24 VW 3200-3475 27 118-128 ED X X X X X X X X 24 MW 3600-3925 31 117-127 ED1 X X X X X X X X 24 LW 4325-4700 36 120-130 ESD X X X X X X 24 ML 4800-5225 40 121-131 LUT5 X X X X 24 HL 5625-6100 48 118-128 LUTH X X X X 24 VL 7000-7600 61 115-125 LUT5 and LUTH not available in 347V 24 XL 8475-9200 77 110-120 Nominal lumen range represents 3000K through 5000K. Lumens vary according to color temperatures and other factors. See specific photometric test(s). OPTIONS DRIVER E ESD ED ED1 LUTH ACCESSORIES (ORDER SEPARATELY) FK24 2' × 4' Single Flange Kit (Shipped separately) CM48Y2SC3F-KIT 48" Cable Mount Kit for 2' wide Cable Mount fixtures, 3 Wire For drywall, order G with Flange Kit Accessory. Not available with Air Return (A) air function 3 Order hanger accessories separately 4 Not available in 347V 5 For compatability with Dual-Lite LiteGear® inverters, contact Hubbell Lighting Representative For questions about configuration options, contact Hubbell Representative. 1 2 LED / LTGR24 LTGR24 2' × 4' LED Specification Grade Architectural Recessed PHOTOMETRIC DATA LUMINAIRE DATA Luminaire Ballast Ballast Factor Lamp Fixture Lumens Watts Mounting Shielding Angle Spacing Criterion Luminous Opening in Feet Test #15921 Test Date 2/25/2016 ZONAL LUMEN SUMMARY LTGR24-35LWx-R-EDU LTGR LED Recessed Architectural 2 x 4 with Rectangular Prismatic Lens XI040C110V054BPT1 1.00 LED 4413 36.20 Recessed 0º = 90 90º = 90 0º = 1.21 90º = 1.58 Length: 3.92 Width: 1.92 Height: 0.00 Zone 0-30 INDOOR CANDELA PLOT Lumens % Lamp % Fixt. 1031 23.4 23.4 0-40 1744 39.5 39.5 0-60 3268 74.1 74.1 0-90 4413 100.0 100.0 0-180 4413 100.0 100.0 90 75 700 ENERGY DATA 60 Total Luminaire Efficiency 100.0% Total Lumens per Watt IESNA RP-1-2004 Compliance Comparative Yearly Lighting Energy Cost per 1000 Lumens 122 Non-Compliant $1.95 based on 3000 hrs. and $0.08 per KWH 1400 0 15 30 45 Horiz 0-180 0.0 45.0 90.0 Test #15922 Test Date 2/25/2016 LUMINAIRE DATA Luminaire Ballast Ballast Factor Lamp Fixture Lumens Watts Mounting Shielding Angle Spacing Criterion Luminous Opening in Feet ZONAL LUMEN SUMMARY LTGR24-35MLx-Rx-EDU LTGR LED Recessed Architectural 2 x 4 with Rectangular Prismatic Lens XI054C150V054DNT1 1.00 LED 4901 39.80 Recessed 0º = 90 90º = 90 0º = 1.21 90º = 1.58 Length: 3.94 Width: 1.94 Height: 0.00 Zone 0-30 INDOOR CANDELA PLOT Lumens % Lamp % Fixt. 1144 23.3 23.3 0-40 1936 39.5 39.5 0-60 3630 74.1 74.1 0-90 4901 100.0 100.0 0-180 4901 100.0 100.0 90 75 750 ENERGY DATA Total Luminaire Efficiency 100.0% Total Lumens per Watt IESNA RP-1-2004 Compliance Comparative Yearly Lighting Energy Cost per 1000 Lumens 123 Non-Compliant $1.95 based on 3000 hrs. and $0.08 per KWH 60 1500 0 15 0.0 30 Horiz 0-180 45 45.0 90.0 Test #15923 Test Date 2/25/2016 LUMINAIRE DATA Luminaire Ballast Ballast Factor Lamp Fixture Lumens Watts Mounting Shielding Angle Spacing Criterion Luminous Opening in Feet ZONAL LUMEN SUMMARY LTGR24-35HLx-Rx-EDU LTGR LED Recessed Architectural 2 x 4 with Rectangular Prismatic Lens XI054C150V054DNT1 1.00 LED 5722 47.70 Recessed 0º = 90 90º = 90 0º = 1.21 90º = 1.33 Length: 3.94 Width: 1.94 Height: 0.00 Zone INDOOR CANDELA PLOT Lumens % Lamp % Fixt. 0-30 1338 23.4 23.4 0-40 2264 39.6 39.6 0-60 4242 74.1 74.1 0-90 5722 100.0 100.0 0-180 5722 100.0 100.0 90 75 900 ENERGY DATA 60 Total Luminaire Efficiency 100.0% Total Lumens per Watt IESNA RP-1-2004 Compliance Comparative Yearly Lighting Energy Cost per 1000 Lumens 120 Non-Compliant $2.02 based on 3000 hrs. and $0.08 per KWH 1800 0 15 45 30 Horiz 0-180 0.0 Page 2/3 Rev. 06/30/16 © 2016 Columbia Lighting, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Website www.columbialighting.com 45.0 90.0 LED / LTGR24 LTGR24 2' × 4' LED Specification Grade Architectural Recessed 8 8 DIMENSIONAL DATA — GRID 7 6 5 4 7 6 5 4 GRID, STATIC 3 2 REV 3 DATE REV DATE - RECORD2 DESN CHCK DRAWING CREATED DESN JMS CHCK RECORD DRAWING CREATED JMS - E E D D 4" 23 3/4" 8 7 6 5 4 8 7 6 5 4 3 2 REV DATE - 1 RECORD DESN CHCK DRAWING CREATED JMS - EC # - D D C C B B NOTES: UNLESS OTHERWISE SPECIFIED 1. DEBURR AND BREAK SHARP CORNERS. 2. FOR DIMENSIONS NOT SHOWN REFER TO 3D MODEL. CRITICAL DIMENSIONS UNSPECIFED TOLERANCES: INCHES X.X=u0.030 X.XX=u0.015 X.XXX=u0.005 FRACTIONS=u1/64 ANGULAR TOLERANCE=u2v DRAWN: 03/06/15 A DIMENSIONS IN INCHES DIMENSIONS IN [ ] IN MM CONFORMS TO ASME Y14.5M DO NOT SCALE PRINT This document contains confidential and proprietary information of Columbia Lighting, a division of Hubbell Lighting, Inc. (HLI). Receipt or possession of this document does not convey any rights to reproduce or disclose its contents, or to make, use , or sell anything it may disclose. Reproduction, disclosure, or use of the document or its contents, without the specific written authorization of HLI, may violate the intellectual property rights of HLI. JSANCHEZ CHECKED BY: - ENGINEERING: JMS CATALOG NO. THIRD ANGLE PROJECTION 3 - - ASSY 24 MATERIAL: SCALE PV:1 FINISH: SIZE B DRAWING NO. 2 - 93057735 A SIMILAR TO: REV. A - SHT 1 5 SHTS 1 Recessed Section (G) C C Back of Housing, Grid GRID, AIR RETURN 23 3/4" B B NOTES: UNLESS OTHERWISE SPECIF NOTES: OTHERWISE SPECIF 1. DEBURRUNLESS AND BREAK SHARP CORNERS. 47 3/4" 1. FOR DEBURR AND BREAK SHARP CORNERS. 2. DIMENSIONS NOT SHOWN REFER TO 3 MODEL. 2. FOR DIMENSIONS NOT SHOWN REFER TO 3 CRITICAL DIMENSIONS CEILING COMPATIBILITY Type G UNSPECIFED TOLERANCES: INCHES MODEL. CRITICAL DIMENSIONS u0.030 X.XX= u0.015 X.XXX=u0.005 X.X= FRACTIONS= 1/64 ANGULAR TOLERANCE= u2v UNSPECIFEDuTOLERANCES: INCHES X.XX=u0.015 DRAWN: X.XXX=u0.005 X.X=u0.030IN INCHES DIMENSIONS 03/06/15 FRACTIONS=u1/64 ANGULAR TOLERANCE=u2v DIMENSIONS IN [ ] IN MM JSANCHEZ DRAWN: DIMENSIONS IN INCHES 03/06/15 CONFORMS TO ASME Y14.5M CHECKED BY: A A FK24 Flange Kit FKCR DIMENSIONS IN PRINT [ ] IN MM DO NOT SCALE CONFORMS TO ASME Y14.5M DO NOT SCALE PRINT -JSANCHEZ - JMS -- CHECKED BY: ENGINEERING: ENGINEERING: CATALOG NO. Side End For lay-in installation in exposed grid ceilings. Maximum tee widths of 1" and maximum tee heights of 2" allowed. Side 8 7 6 5 4 8 7 6 5 4 THIRD ANGLE PROJECTION THIRD ANGLE PROJECTION JMS - CATALOG NO. 3 3 - - MATERIAL: SIZE SCALE PV:1 SCALE PV:1 For flanged fixtures in row configurations, the FKCR adapter bracket kit is required in addition to the FK24 kit. Order one less FKCR than the total number of fixtures in row. (Example: Row of two, order (2) FK24 & (1) FKCR) Row cut out dimensions using FK24s & FKCR adapters: Width 243/8", Length [48" × (# in row)] + 3/8". Example: (48" × 2) + 3/8" = 963/8" Flange kit cut out dimension for single unit only: 243/8" × 483/8" DIMENSIONAL DATA — SURFACE MOUNT OR CABLE MOUNT, STATIC ONLY Surface Section (SM) 4 5/8" 25" Back of Housing, Surface Mount (SM) and Cable Mount (CM) 45 5/16" 1 13/16" B B A 1 5/8" A 1 1/2" A A 12 7/16" Surface Mount: Order SM ceiling type. Mounting collar required for surface mounting. (4) Mounting knock-outs, 3⁄8", provided in center channel as indicated at left, marked A. Cable Mount: Order CM ceiling type. Use CM48Y2SC3F-KIT 48" Cable Mount Kit for 2' wide CM trim fixtures. Mounting holes are provided in diagonal straps shown at left, marked B. B B 49" 5 3/16" For Cable Mount a 2" x 3" access plate with (4) 7⁄8" KOs provided in place of Mounting Collar shown. NOTE: All dimensions are in inches; dimensions and specifications are subject to change without notice. Please consult factory or check sample for verification. * Page 3/3 Rev. 06/30/16 © 2016 Columbia Lighting, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Website www.columbialighting.com ASSY 24 FINISH: ASSY 24 MATERIAL: End For hard ceiling applications, order FK24 flange kit. Flange kit wires directly into concealed ceiling opening for a clean, finished appearance. This document contains confidential and proprietary informatio Lighting, a division of Hubbell Lighting, Inc. (HLI). Receipt or document does not convey any rights to reproduce or disclose make, use , or sell anything it may disclose. Reproduction, di This document contains confidential and proprietary informatio document its contents, without the specific written authoriza Lighting, aor division of Hubbell Lighting, Inc. (HLI). Receipt or violate the does intellectual property document not convey anyrights rightsoftoHLI. reproduce or disclose make, use , or sell anything it may disclose. Reproduction, di document or its contents, without the specific written authoriz violate the intellectual property rights of HLI. LED / LTGR24 B B SIZE FINISH: DRAWING NO. 2 2 - - 93057735 DRAWING NO. 93057735 SIMILAR T SIMILAR T REV. A A REV. SHT 5 SH SHT 5 SH