SCOPE: THIS STANDARD SHOWS THE METHOD OF INSTALLATION OF ARTIFICIAL IVY ON PADMOUNT CABINETS. A. TRANSFORMER PADMOUNT RISER NUMBER (EXAMPLE: RC892) (DO NOT COVER) TRANSFORMER NUMBER (DO NOT COVER) EQUIPMENT NUMBER (EXAMPLE: 19076) (DO NOT COVER) COVER TOP (NOTE 4) SAFE WORKING CLEARANCE STICKER (DO NOT COVER) ARTIFICIAL IVY (TYP.) 6" WARNING SIGN (DO NOT COVER) ARTIFICIAL IVY (TYP.) DOOR HANDLE ANTI-TAMPER BOLT AND LOCK ASSEMBLY (DO NOT COVER) THREE PHASE PMT COVER TOP (NOTE 4) FILENAME: CO 114-12 REV 0 EQUIPMENT NUMBER (DO NOT COVER) SAFE WORKING CLEARANCE STICKER (DO NOT COVER) RISER NUMBER (DO NOT COVER) WARNING SIGN (DO NOT COVER) TRANSFORMER NUMBER (DO NOT COVER) ARTIFICIAL IVY (TYP.) DOOR HANDLE ANTI-TAMPER BOLT & LOCK ASSEMBLY (DO NOT COVER) ARTIFICIAL IVY (TYP) SINGLE PHASE PMT CITY OF ANAHEIM PUBLIC UTILITIES DEPARTMENT ELECTRICAL DIVISION T&D CONSTRUCTION STANDARDS ADDED / REVISED TEXT ADDED / REVISED MATERIAL NEW SHEET REVISION NO. ISSUE DATE : APPROVALS SUB MAINT - REVISION KEYS: - METHOD OF INSTALLING ARTIFICIAL IVY ON PADMOUNT CABINETS SHEET 1 OF 0 01-14 8 CONSTRUCTION STANDARD: CO 114-12 B. AUTOMATIC TRANSFER SWITCH, PADMOUNT COVER TOP (NOTE 4) CIRCUIT IDENTIFICATION (DO NOT COVER) AUTO TRANSFER SWITCH (A.T.S.) DESIGNATION NUMBER (DO NOT COVER) PREFERRED/EMERGENCY IDENTIFICATION (DO NOT COVER) SAFE WORKING CLEARANCE STICKER (DO NOT COVER) XXXXXXXX XXXXXX ATS XXX CIRCUIT IDENTIFICATION (DO NOT COVER) 6" WARNING SIGN (REFER TO CO 170) (DO NOT COVER) ARTIFICIAL IVY (TYP.) DOOR HANDLE ANTI-TAMPER BOLT AND LOCK ASSEMBLY (DO NOT COVER) ARTIFICIAL IVY (TYP.) ATS FILENAME: CO114-12 REV 0 (AUTOMATIC TRANSFER SWITCH) CITY OF ANAHEIM PUBLIC UTILITIES DEPARTMENT ELECTRICAL DIVISION T&D CONSTRUCTION STANDARDS ADDED / REVISED TEXT ADDED / REVISED MATERIAL NEW SHEET REVISION NO. ISSUE DATE : APPROVALS SUB MAINT - REVISION KEYS: - METHOD OF INSTALLING ATIFICIAL IVY ON PADMOUNT CABINETS SHEET 2 OF 0 01-14 8 CONSTRUCTION STANDARD: CO 114-12 C. 15KV 600 AMP PADMOUNT LIVE FRONT FUSE CABINET (PMH) COMPARTMENT IDENTIFICATION USE 1" NUMBERS (DO NOT COVER) CIRCUIT INTERRUPTER (CI) IDENTIFICATION 1 USE 2 2" LETTERS AND NUMERALS (DO NOT COVER) WARNING SIGN (DO NOT COVER) COVER TOP (NOTE 4) WARNING SIGN (DO NOT COVER) SAFE WORKING CLEARANCE STICKER. (DO NOT COVER) DOOR HANDLE ANTI-TAMPER BOLT AND LOCK ASSEMBLY (DO NOT COVER) ARTIFICIAL IVY (TYP.) PADMOUNT CABINET IDENTIFICATION ON CENTER OF STREET SIDE - USE 2 1/2" LETTERS AND NUMERALS (DO NOT COVER) FILENAME: CO114-12 REV0 ARTIFICIAL IVY (TYP.) CITY OF ANAHEIM PUBLIC UTILITIES DEPARTMENT ELECTRICAL DIVISION T&D CONSTRUCTION STANDARDS ADDED / REVISED TEXT ADDED / REVISED MATERIAL NEW SHEET REVISION NO. ISSUE DATE : APPROVALS SUB MAINT - REVISION KEYS: - METHOD OF INSTALLING ARTIFICIAL IVY ON PADMOUNT CABINETS SHEET 3 OF 0 01-14 8 CONSTRUCTION STANDARD: CO 114-12 D. SWITCHED CAPACITOR BANK, PADMOUNT PSC NUMBER (EXAMPLE: PSC123) EQUIPMENT NUMBER (EXAMPLE: 19076) (DO NOT COVER) COVER TOP (NOTE 4) (DO NOT COVER) SAFE WORKING CLEARANCE STICKER (DO NOT COVER) ARTIFICIAL IVY (TYP.) DOOR HANDLE ANTI-TAMPER BOLT AND LOCK ASSEMBLY (DO NOT COVER) WARNING SIGN (DO NOT COVER) FRONT SIDE ARTIFICIAL IVY (TYP.) SAFE WORKING CLEARANCE STICKER (DO NOT COVER) ARTIFICIAL IVY (TYP.) ARTIFICIAL IVY (TYP.) WARNING SIGN (DO NOT COVER) FILENAME: CO114-12 REV 0 DOOR HANDLE ANTI-TAMPER BOLT AND LOCK ASSEMBLY (DO NOT COVER) BACK SIDE PSC (PADMOUNTED SWITCHED CAPACITOR) CITY OF ANAHEIM PUBLIC UTILITIES DEPARTMENT ELECTRICAL DIVISION T&D CONSTRUCTION STANDARDS ADDED / REVISED TEXT ADDED / REVISED MATERIAL NEW SHEET REVISION NO. ISSUE DATE : APPROVALS SUB MAINT - REVISION KEYS: - METHOD OF INSTALLING ARTIFICIAL IVY ON PADMOUNT CABINETS SHEET 4 OF 0 01-14 8 CONSTRUCTION STANDARD: CO 114-12 E. 15KV 600 AMP DEAD FRONT SWITCH (VFI), PADMOUNT COVER TOP (NOTE 4) WARNING SIGN (DO NOT COVER) SAFE WORKING CLEARANCE STICKER (DO NOT COVER) EQUIPMENT NUMBER (EXAMPLE: 19076) (DO NOT COVER) PMV NUMBER (EXAMPLE: PMV 123) (DO NOT COVER) WARNING SIGN (DO NOT COVER) DOOR HANDLE ANTI-TAMPER BOLT AND LOCK ASSEMBLY (DO NOT COVER) DOOR HANDLE ANTI-TAMPER BOLT AND LOCK ASSEMBLY ARTIFICIAL IVY (TYP.) ARTIFICIAL IVY (TYP.) FILENAME: CO114-12 REV 0 PMV (PADMOUNTED VFI SWITCH) CITY OF ANAHEIM PUBLIC UTILITIES DEPARTMENT ELECTRICAL DIVISION T&D CONSTRUCTION STANDARDS ADDED / REVISED TEXT ADDED / REVISED MATERIAL NEW SHEET REVISION NO. ISSUE DATE : APPROVALS SUB MAINT - REVISION KEYS: - METHOD OF INSTALLING ARTIFICIAL IVY ON PADMOUNT CABINETS SHEET 5 OF 0 01-14 8 CONSTRUCTION STANDARD: CO 114-12 F. DISTRIBUTION FUSE CABINET COVER TOP (NOTE 4) ARTIFICIAL IVY (TYP.) LIFTING LUGS EQUIPMENT NUMBER (DO NOT COVER) XXX SAFE WORKING CLEARANCE STICKER (DO NOT COVER) FUSE CABINET NUMBER (EX. DFC-001) (DO NOT COVER) (DO NOT COVER) ARTIFICIAL IVY (TYP.) WARNING SIGN (DO NOT COVER) COVER SIDES & BACK IF ACCESSIBLE FRONT VIEW DFC (DISTRIBUTION FUSED CABINET) RADIO ANTENNA OPTIONAL COVER TOP (NOTE 4) LIFTING EARS REMOVABLE DOOR HANDLE W/ PAD LOCK PROVISIONS (DO NOT COVER) FILENAME: CO114-12 REV 0 COVER SIDES & BACK IF ACCESSIBLE FRONT VIEW AC (AUTOMATION CABINET) * WWW.WELDMOUNTSYSTEM.COM CITY OF ANAHEIM PUBLIC UTILITIES DEPARTMENT ELECTRICAL DIVISION T&D CONSTRUCTION STANDARDS ADDED / REVISED TEXT ADDED / REVISED MATERIAL NEW SHEET REVISION NO. ISSUE DATE : APPROVALS SUB MAINT - REVISION KEYS: - METHOD OF INSTALLING ARTIFICIAL IVY ON PADMOUNT CABINETS SHEET 6 OF 0 01-14 8 CONSTRUCTION STANDARD: CO 114-12 WIRE TIE MOUNT GRID LINES (NOTE 15) 12" MAX (TYP) 12" MAX (TYP) FRONT SIDE TYPICAL WIRE-TIE-MOUNT APPLICATION CU MFR MODEL ----AT-5 (BLACK) ----AT-2010 FILENAME: CO114-12 REV 0 QTY. ITEM# DESCRIPTION MANUFACTURER STOCK CODE 1 ARTIFICIAL IVY AS NEEDED IVY-IT --2 WIRE TIE MOUNT AS NEEDED WELD MOUNT SYSTEM* --3 ADHESIVE AS NEEDED WELD MOUNT SYSTEM* --- * WWW.WELDMOUNTSYSTEM.COM CITY OF ANAHEIM PUBLIC UTILITIES DEPARTMENT ELECTRICAL DIVISION T&D CONSTRUCTION STANDARDS ADDED / REVISED TEXT ADDED / REVISED MATERIAL NEW SHEET REVISION NO. ISSUE DATE : APPROVALS SUB MAINT - REVISION KEYS: - METHOD OF INSTALLING ARTIFICIAL IVY ON PADMOUNT CABINETS SHEET 7 OF 0 01-14 8 CONSTRUCTION STANDARD: CO 114-12 NOTES: 1. ARTIFICIAL IVY SHOULD BE INSTALLED USING NON-INTRUSIVE MATERIAL, AND SHOULD LEAVE NO OR MINIMAL RESIDUE AFTER REMOVAL FROM EQUIPTMENT SURFACE. THE RESIDUE SHOULD BE REMOVABLE AND CLEANABLE WITHOUT LEAVING ANY MARK OR DAMAGE TO EQUIPMENT CABINET. 2. INSTALL ARTIFICIAL IVY ONLY ON SURFACES VISIBLE TO THE PUBLIC, UNLESS OTHERWISE APPROVED BY THE UTILITY INSPECTOR. INCLUDE TRANSFORMER OUTSIDE FINS. 3. DOOR SEAMS SHOULD NOT BE COVERED AND INSIDE OF CABINET SHOULD BE ACCESSIBLE FOR OPERATING AND MAINTAINING EQUIPMENT. 4. COVER TOP OF EQUIPMENT IF EQUIPMENT IS SHORTER THAN 4 FEET OR TOP IS REACHABLE FOR APPLYING GRAFFITI. 5. USE NYLON TIE WRAP WITH UV RATING TO INSTALL ARTIFICIAL IVY TO WIRE TIE MOUNT. 6. WASH EQUIPTMENT OFF OF LOOSE DIRT /SOOT ETC. (IF EQUIPMENT HAS RUST, HOLES, SHOWS ANY SIGNS OF OIL LEAKAGE, OR ANY OTHER DAMAGE OF ANY SORT REPORT IT TO CITY REPRESENTATIVE IMMEDIATELY). 7. PAINT OVER GRAFFITI MARKINGS WITH MUNSELL GREEN 7GY3.29/1.5 PAINT AS NEEDED. 8. APPLY/REPLACE ALL EQUIPMENT IDENTIFICATION MARKINGS, WARNING STICKERS, AND ANY OTHER LABELS THAT ARE REQUIRED. 9. PRIOR TO IVY INSTALLATION USE INFRA-RED GUN TO TAKE TEMPERATURE READINGS. 10. APPLY WIRE-TIE-MOUNT TO EACH OF THE FOUR SIDES AND TOP OF THE EQUIPMENT LESS THAN 12" APART AS NEEDED (THE NUMBER OF TABS VARIES DEPENDING ON THE SIZE OF THE EQUIPMENT). USE THE TWO PART EPOXY GLUE RECOMMENDED BY THE TAB MANUFACTULRER TO ADHERE TABS TO THE EQUIPMENT. 11. TRIM IVY TO DESIRED LENGTHS AND SHAPES TO EXPOSE ALL WARNING LABELS AND EQUIPMENT MARKINGS. 12. TRIM IVY FOR DOOR HANDLES AND TO ALLOW DOORS TO OPEN AND CLOSE WITHOUT INTERFERENCE. FILENAME: CO114-12 REV 0 13. APPLY ARTIFICIAL IVY BY CABLE TYING TO WIRE-TIE-MOUNTS APPLIED IN STEP 10, USING UV RATED CABLE TIES. 14. AFTER INSTALLATION OF IVY IS COMPLETE, TAKE ADDITIONAL TEMPERATURE READING ON ALL FOUR SIDES OF THE EQUIPMENT, RECORD READINGS. 15. TO PLACE WIRE-TIE-MOUNTS ACCURATELY IDENTIFY THEIR LOCATIONS BY DRAWING GRIDLINES AS SHOWN ON PAGE 6. * WWW.WELDMOUNTSYSTEM.COM CITY OF ANAHEIM PUBLIC UTILITIES DEPARTMENT ELECTRICAL DIVISION T&D CONSTRUCTION STANDARDS ADDED / REVISED TEXT ADDED / REVISED MATERIAL NEW SHEET REVISION NO. ISSUE DATE : APPROVALS SUB MAINT - REVISION KEYS: - METHOD OF INSTALLING ARTIFICIAL IVY ON PADMOUNT CABINETS SHEET 8 OF 0 01-14 8 CONSTRUCTION STANDARD: CO 114-12