JOB NAME:
TYPE NO.:
CATALOG NO.:
NXLED Series Wet Location LED
Exit Signs
ORDERING INFORMATION
Catalog Number: Example: HBPNNXLEDRDEH36
MODEL NUMBER
NXLED - AC-Only
BNNXLED - Emergency, Nickel Cadmium Battery. No Remote Capacity
HBPNXLED - Emergency, Lead Calcium
Battery. 24W Remote Capacity
HBPNNXLED - Emergency, Nickel Cadmium Battery. 24W Remote Capacity
OPTIONS (1)(2)
DEH362-Par 36 Mounted Heads (3)(4)
TCI1 Two Circuit Input - 120V
TCI2 Two Circuit Input - 277V
TD1 15-Min. Retransfer Delay- 120V
TD2 15-Min. Retransfer Delay- 120V
SX Self-diagnostic Operation (4)
IA Audible Intermittent Alarm (4)
IV
Visual Intermittent Alarm (4)
FA Fire Alarm Panel Interface (4)
(1) Other options available.
(2) Some options may impact UL listing.
(3) 7.2W side mounted lighting heads.
(4) For use with HBP, HBPN emergency
models only.
SPECIFICATIONS
EXIT LETTER
COLOR
R - Red
G - Green
OPTIONS
see below
ACCESSORIES
PG5
Wire Guard - Exits without Lighting Heads
PG10
Wire Guard - Exits with Lighting Heads
All Models
• Rugged polycarbonate housing
• Corrosion resistant construction
• Suitable for damp, wet, dusty or dirty environments
• AC-only, emergency and combination models
• For wall surface mounting applications
• Universal directional chevrons provided by knockouts
• White exit face with grey housing standard
• High output, long life LED lamps
• Red or green exit letters
• Universal 120/277VAC field selectable input
• UL Wet Location listed
Emergency Models
Optional Side Mounted Lighting
Heads (DEH Option)
Housing: Corrosion resistant wet-location type sealed and gasketed fiberglass
reinforced enclosure in industrial gray finish with clear polycarbonate cover.
Lighting Heads: Impact resistant, UV stable, flame rated thermoplastic lamp Construction housing and swivel assemblies in gray finish to match unit housing.
Heads and swivels are sealed and gasketed. Lighting heads are fully adjustable and feature lockable swivels.
Mounting: Units are designed for installation to wall surfaces by means of four
through holes provided in the enclosure housing.
Installation
Wiring: Knockouts are provided on both sides of the enclosure for attachment of surface wiring or conduit.
Exit Face
Letter Size: 6” letters with 3/4” stroke
Directional Arrows: Removable chevron arrows meet UL visibility requirements.
Normal AC and emergency exit face illumination is provided by a special high
Illumination intensity indirect red or green LED panel. Letter brightness and illumination uniformity exceed UL requirements.
• Dual input 120/277VAC, 60 Hz
• AC Lockout protection
Electronics
• AC-On indicator light and test switch • Low voltage battery disconnect
• Automatic charger and transfer circuit Power
Normal Input Power: 4.8W (max) Regardless of AC input voltage.
Consumption Emergency models will draw up to 15W (max.) during charge cycles.
Sealed nickel cadmium longest life maintenance free battery.
Operating temperature range: BNNXLED: 32ºF to 104ºF (0ºC to 40ºC)
Battery
All Others: 68ºF to 86ºF (20ºC to 30ºC)
Provides a minimum of 90 minutes of full output emergency illumination
Code Emergency models are UL924 listed. Meets NFPA Life Safety Code 101.
Compliance Complies with NEC and OSHA.
Limited 3-year warranty. 5-year sealed nickel cadmium pro-rata battery
Warranty
warranty
Specifications are subject to change without notice. Consult website for latest version of this spec sheet.
Crescent/Stonco • 200 Franklin Square Drive • Somerset, NJ 08873 •
Crescent is a Philips company
PRODUCT FEATURES
• www.crescentlighting.com
• 90 minutes of emergency illumination
• Solid-state charging and switching circuits
• Choice of sealed maintenance free lead calcium or nickel
cadmium battery
• Temperature ranges BNNXLED: 32ºF to 104ºF (0ºC to 40ºC)
All Others: 68ºF to 86ºF (20ºC to 30ºC)
• Low voltage disconnect protects battery
• AC Lockout feature reduces installation time
• Momentary test switch and LED AC Ready indicator light
• Optional self-diagnostic circuit available
• UL operating range 68ºF to 86ºF (20ºC to 30ºC)
• Meets NFPA Life Safety Code 101, NEC and OSHA
• UL924 listed
DIMENSIONS
71/2”
19.1cm
22”
55.9cm
43/4”
12.1cm
117/8”
30.2cm
Square
67/8”
17.5cm
NOTE: Dimensions and specifications subject to change without notice.
Form 1150A 04/12 © 2006 Philips group