Sensors : Hall-Effect Current Sensor Breakout - ACS712 - RoboticsPK
Hall-Effect Current Sensor Breakout - ACS712
Rating: Not Rated Yet
Price:
Variant price modifier:
Price with discount: 1,700.00 PKR
Salesprice with discount:
Sales price: 1,700.00 PKR
Discount:
Tax amount:
Ask a question about this product
Description
This is a breakout board for the fully integrated Hall Effect based linear ACS712 current sensor. The sensor gives precise current measurement
for both AC and DC signals. Thick copper conductor and signal traces allows for survival of the device up to 5 times overcurrent conditions.
The ACS712 outputs an analog voltage output signal that varies linearly with sensed current. The device requires 5VDC for VCC and a couple
of filter capacitors.
Features:
x05B (5 Amp) version
Low noise analog signal path
Device bandwidth is set via the FILTER pin
5us output rise time in response to input current
80kHz bandwidth
1.5% output error at 25 degrees C
1.2mOhm internal conductor resistance
2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8
5.0 VDC, single supply operation
66 to 185 mV/A output sensitivity
Output voltage proportional to AC or DC currents
Factory-trimmed for accuracy
Extremely stable output offset voltage
Nearly zero magnetic hysteresis
1 / 2
Sensors : Hall-Effect Current Sensor Breakout - ACS712 - RoboticsPK
Ratiometric output from supply voltage
Reviews
There are yet no reviews for this product.
2 / 2
Powered by TCPDF (www.tcpdf.org)