5998-3203_1810-8p-24p_Safety-Reg.fm Page 1 Tuesday, June 12, 2012 7:52 PM
Safety and Regulatory Information
for HP 1810 Switches
Electrical:
Environmental:
Operating Temperature:
Relative humidity:
Non-Operating Temperature:
Non-Operating Relative humidity:
Maximum Operating Altitude:
HP 1810-8 Switch (J9800A)
HP 1810-8G Switch (J9802A)
For power, requires external
power adapter module. See
“1810-8 and 1810-8G External
Power Adapter and Power
Cords:” on page 2.
For power, requires one of the
following:
• External power adapter
module. See “1810-8 and
1810-8G External Power
Adapter and Power Cords:”
on page 2
• or, PoE PD connection to
Port 1. Port 1 is an IEEE
802.3af Compatible PD (PoE
Powered Device) - Class 3.
HP 1810-24 Switch (J9801A) and
HP 1810-24G Switch (J9803A)
For power, requires a power cord connection
from an AC power source. See “1810-24 and
1810-24G Power Cords” below.
AC Input Voltage:
AC Maximum Input Current:
Frequency Range:
100-127 / 200-240
0.4 A / 0.3 A
50/60 Hz
These switches automatically adjust to any
voltage between 100-127 and 200-240 volts and
either 50 or 60 Hz.
0°C to 40°C (32°F to 104°F)
15% to 95% at 40°C (104°F), non-condensing
-40°C to 70°C (-40°F to 158°F)
15% to 90% at 65°C (149°F), non-condensing
Up to 3 km (10,000 ft)
The operating maximum altitude should not exceed that of any accessory being connected to the switch.
Acoustic:
Power: 0 dB (no fan)
Safety:
CSA22.2 No. 60950-1; EN60950-1/IEC60950-1; UL60950-1
1810-24 and 1810-24G Only: EN 60825-1 / IEC 60825-1 Class 1; Class 1 Laser Products / Laser Klasse 1
Note
1810-24 and 1810-24G only: Use only supported genuine HP mini-GBIC/SFP transceivers with your switch.
When selecting a fiber SFP device, make sure it can function at a temperature that is not less than the recommended
maximum operational temperature of the product. Use only an approved Laser Class 1 SFP transceiver.
HP 1810-8 (J9800A), HP 1810-8G (J9802A), HP 1810-24 (J9801A), and HP 1810-24G (J9803A) Switches:
WARNING
FOR INDOOR USE ONLY. The switch, AC power cord or adapter, and all connected cables are not designed for outdoor use.
Russia/CEE Safety:
Chinese Altitude Warning
5998-3203_1810-8p-24p_Safety-Reg.fm Page 2 Tuesday, June 12, 2012 7:52 PM
1810-24 and 1810-24G Power Cords
Use one of the following:
Australia/New Zealand
China
Continental Europe
Denmark
India
8121-0833
8120-8377
8120-6802
8120-6806
8121-0772
Israel
Japan
South Africa
South Korea
Switzerland
Taiwan
8121-1035
8120-6804
8120-6808
8120-6802
8120-6807
8121-0964
Thailand
United Kingdom/Hong Kong/Singapore/Malaysia
United States/Canada/Mexico
Brazil
Argentina
Chile
8121-0667
8120-8709
8120-6805
8121-1069
8120-6871
8120-6979
1810-8 and 1810-8G External Power Adapter and Power Cords:
Universal inline power adapter (5066-1122*)
specifications:
–
–
–
–
–
–
AC Input Voltage: 100-240 V
Maximum AC Input Current: 0.5 A
AC Input Frequency Range: 50/60 Hz
Power Consumption: 15 W
DC Output Voltage: 12 ± 10% V
Maximum DC Output Current: 1.25 A
Wall plug-in power adapter specifications:
–
–
–
–
–
–
AC Input Voltage: 100-240 V
Maximum AC Input Current: 0.4 A
AC Input Frequency Range: 50/60 Hz
Power Consumption: 13 W
DC Output Voltage: 12 ± 10% V
Maximum DC Output Current: 1.085 A
AC power cord:
8121-0870
8121-0664
8120-8373
8121-0702
8120-6314
8120-6316
8120-6317
8120-8441
8121-0963
8120-8699
8121-1081
8120-8367
8121-0514
Australia/New Zealand
Thailand
China
India
Israel
Japan
South Africa
South Korea
Taiwan
United Kingdom/Hong Kong/Singapore/Malaysia
Brazil
Argentina
Chile
Power adapter: (AC power cords are not used)
5184-5863*
5184-5864*
United States/Canada/Mexico
Continental Europe/Denmark/Norway/Sweden/Switzerland
* Complies with Energy Star 5.0 standards.
Japan Power Cord Warning
© Copyright 2012 Hewlett-Packard
Development Company, L.P.
The information contained herein is
subject to change without notice.
December 2012
5998-3203