2012 15th International
Conference on Electrical
Machines and Systems
(ICEMS 2012)
Sapporo, Japan
21 - 24 October 2012
Pages 1-797
IEEE Catalog Number:
ISBN:
1/2
CFP12801-PRT
978-1-4673-2327-7
ICEMS 2012
Monday, October 22
Technical Sessions
Special Lecture
Date:
Monday, October 22
Time:10:30-12:00
Venue: Room A
Chair: Hirohito Funato
Utsunomiya University, Japan
10:30-11:15
A Massive Integration of Renewable Energy into Smart
Grid in Japan
A. Yokoyama
The University of Tokyo, Japan
11:15-12:00
Smartgrids- A Key Step to Energy Efficient Cities of the
Future
G.J. Schaeffer and R.J.M. Belmans
Katholieke Universiteit Leuven, Belgium
Session DS1G1
PM Machines and Drives (1)
Date:
Monday, October 22
Time:13:30-14:45
Venue: Exhibition hall
Chairs: Kichiro Yamamoto
Kagoshima University, Japan
Jahirul Islam
ABB Corporate Research Centre, Sweden
DS1G1-1
Optimization in Structural Design of Triangle Type
IPMSM of Permanent Magnetic Rotor Using BoxBehnken Methodology
Jung-Ho Han1), Gwang-Hyun Ryu1), Ki-Doek Lee1), Jae-Jun Lee1),
In-Gun Kim1), Tae-Chul Jeong1), Won-Ho Kim2), and Ju Lee1)
1)
Hanyang University, Korea, 2)Samsung Advanced Institute of
Technology, Korea
DS1G1-2
New Tubular Fault-Tolerant Permanent-Magnet Motor
for Artificial Heart
Shujun Yan, Jinghua Ji, Fangqun Wang, and Guohai Liu
Jiangsu University, China
DS1G1-3
Cogging Force Analysis for Design of a Cross-Shaped
Core Permanent Magnet Linear Motor
Wan-Tsun Tseng and Jyun-Jheng Wang
National Yunlin University of Science & Technology, Taiwan
DS1G1-4
Visualizing Iron Loss Distribution in Permanent
Magnet Motors
H. Shimoji1,2), B. E. Borkowski1,2), T. Todaka2), and M. Enokizono2)
1)
Oita Prefectural Organization for Industry Creation, Japan,
2)
Oita University, Japan
DS1G1-5
Study on the Ratio of Outer Diameter to Stack Length
Suitable for High Torque and High Power in IPMSMs
Hideyuki Tachibana, Masayuki Sanada, Shigeo Morimoto,
and Yukinori Inoue
Osaka Prefecture University, Japan
DS1G1-6
Study of Characteristics of Various Structures in AxialGap PM Motors
Yusuke Okumura, Masayuki Sanada, Shigeo Morimoto,
and Yukinori Inoue
Osaka Prefecture University, Japan
DS1G1-7
Basic Study of IPMSM with High-Temperature
Superconducting Wire Rod
Kazuya Okada, Shigeo Morimoto, Masayuki Sanada,
and Yukinori Inoue
Osaka Prefecture University, Japan
DS1G1-8
Improvement of Demagnetization by Rotor Structure
of IPMSM with Dy-Free Rare-Earth Magnet
Keigo Imamura, Masayuki Sanada, Shigeo Morimoto,
and Yukinori Inoue
Osaka Prefecture University, Japan
DS1G1-9
Thermal Analysis of Outer Rotor Type IPMSM Using
Thermal Equivalent Circuit
Kyu-Seob Kim1), Byeong-Hwa Lee1), Hae-Joong Kim1),
Jung-Pyo Hong1), and Jang-Hyun Jun2)
1)
Hanyang University, Korea, 2)Doosanmottrol, Korea
DS1G1-10
Thermal Analysis of an Interior Permanent Magnet
Synchronous Traction Motor for High Speed Railway
Applications
Wei Chen, Jien Ma, Xiaoyan Huang, and Youtong Fang
Zhejiang University, China
DS1G1-11
Optimal Shape Design of Rotor to Reduce Torque
Ripple for IPM Motor Based on the Principle of
Mutual Harmonics Exclusion
Wang Aimeng, Zhao Jizong, and Wang Yi
North China Electric Power University, China
ICEMS 2012
Session DS1G2
PM Machines and Drives (2)
Date:
Monday, October 22
Time:13:30-14:45
Venue: Exhibition hall
Chairs: Yukihiko Sato
Chiba University, Japan
Liming Shi
Chinese Academy of Sciences, China
DS1G2-1
Robust Adaptive Neural Network Tracking Control of
a Permanent Magnet Spherical Motor
Xiwen Guo1), Qunjing Wang1), Guoli Li1), Zhe Qian1), Lufeng Ju2),
and Rui Zhou1)
1)
Anhui University, China, 2)Hefei University of Technology,
China
DS1G2-2
Independent Position Control of Two Permanent
Magnet Synchronous Motors Fed by a Five-Leg
Inverter with Space Vector Modulation
Tsutomu Tanaka, Atsushi Hara, Masaya Iwashita,
and Kouki Matsuse
Meiji University, Japan
DS1G2-3
Research on the Starting Methods for Initial Driving of
PMSM
Si Young Yun, Ho Joon Lee, Jae Jun Lee, In Gun Kim, and Ju Lee
Hanyang University, Korea
DS1G2-4
Flux Position Estimating Method of IPMSM at Low
Speed Region Using Current Derivative without High
Frequency Component Injection
Y. Hosogaya and H. Kubota
Meiji University, Japan
DS1G2-5
Phase Control Characteristics of IPM Motor with
Magnet Pole Position Sensor
Shingo Honda, Masashi Kawashima, Takashi Abe,
and Tsuyoshi Higuchi
Nagasaki University, Japan
DS1G2-6
Influence of Speed EMF on Position Estimation Error
in Carrier Signal Injection Based Sensorless Control of
PMSM
Jianmin Wang and Jianwei Gao
Shandong University, China
DS1G2-7
Single Sensor Three-Phase Permanent Magnet
Synchronous Motor Drive Based on Luenberger StyleObservers
Bahaa Hafez1), A. Abdel-Khalik2), A. M. Massoud3),
Shehab Ahmed4), and Robert D. Lorenz5)
1)
Texas A&M University, USA, 2)Alexandria University, Egypt,
3)
Qatar University, Qatar, 4)Texas A&M University at Qatar, Qatar,
5)
University of Wisconsin-Madison, USA
Monday, October 22
DS1G2-8
A Consideration on Influence of Reduction of DCLink Capacitance on Position Sensorless Control for
Permanent Magnet Synchronous Motor
Masanori Karino, Nobukazu Hoshi, and Junnosuke Haruna
Tokyo University of Science, Japan
DS1G2-9
Attenuation of Wide Margin Disturbance Fluctuation
in SGCMG Gimbal Servo System
Ming Lu1,2), Xiang Li2), and Yaohua Li1)
1)
Chinese Academy of Sciences, China, 2)Beijing Institute of
Control Engineering, China
DS1G2-10
Study of Performance Improvement of Slotless SPMSM
Position Sensorless Control in Very Low-Speed Region
Takurou Iwata, Shigeo Morimoto, Yukinori Inoue,
and Masayuki Sanada
Osaka Prefecture University, Japan
Session DS1G3
Induction Machines and Drives (1)
Date:
Monday, October 22
Time:13:30-14:45
Venue: Exhibition hall
Chairs: Isao Hirotsuka
Chubu University, Japan
Erich Schmidt
Vienna University of Technology, Austria
DS1G3-1
Optimization Research of FOC Based on PSO of
Induction Motors
Fang Xie, Qun-jing Wang, and Guo-li Li
Anhui University, China
DS1G3-2
Analysis and Calculation of Capacitance Parameters in
Induction Machines to Predict Shaft Voltage
Xiping Ma, RuifangLiu, Bohua Zheng, and Yihuang Zhang
Beijing Jiaotong University, China
DS1G3-3
The Effects of End Part of Winding on Parasitic
Capacitances of Induction Motor Fed by PWM
Inverter
Junfeng Li, Ruifang Liu, Bohua Zheng, and Yihuang Zhang
Beijing Jiaotong University, China
DS1G3-4
Steady-State and Transient Characteristics of a HighPerformance V/f Control System of Induction Motor
Xiaodan Zhao1), Mineo Tsuji2), Yasunari Inaki2),
and Shinichi Hamasaki2)
1)
Hangzhou Dianzi Univrsity, China, 2)Nagasaki University, Japan
DS1G3-5
Performance Improvement of an Induction Motor by
Soft Magnetic Composite (SMC)
Toshihide Meguro and Masayuki Morimoto
Tokai University, Japan
ICEMS 2012
DS1G3-6
Characteristics of Vector Control Two Induction Motor
Drives Fed by Matrix Converter
Masataka Yamazaki, Kiyoya Sakaki, and Kouki Matsuse
Meiji University, Japan
DS1G3-7
Speed Characteristics of Sensorless Vector Controlled
Two Unbalanced Induction Motor Drive Fed by Single
Inverter
Kazuya Azegami1), Yuma Takahashi1), Koki Matsuse1),
Shigeru Ito2), and Yoichiro Nakajima2)
1)
Meiji University, Japan, 2)Sanken Electric Co., Ltd. Japan
DS1G3-8
Improved Performance of Independent Two Induction
Motor Drives Fed by a Four-Leg Inverter with Vector
Control Method
Haruki Tanaka, Syun Saito, and Kouki Matsuse
Meiji University, Japan
DS1G3-9
Dual Induction Motor Drive System Fed by Indirect
Matrix Converter with Five-Leg Inverter
Yang Mei, Naqing Chang, Lipeng Wang, and Zhengxi Li
North China University of Technology, China
DS1G3-10
Design and Implementation of Multi-Objective
& Inverse Optimization System for Three-phase
Induction Motor
Rui Zhou1), Guo-li Li1), Qun-jing Wang1), Jing Zhang1),
Guang-hui Fang2), and Zhizhong Li3)
1)
Anhui University, China, 2)Jiangnan University, China, 3)Zhejiang
University of Technology, China
DS1G3-11
Small Signal Stability Analysis of Doubly Fed Induction
Generator Including SDBR
Mohammad Hasanuzzaman Shawon, Ahmed Al Durra,
Cedric Caruana, and S. M. Muyeen
The Petroleum Institute, UAE
DS1G3-12
Performance Analysis of a Sliding Mode Control for
Distributed Generations
Gazi Islam1), Ahmed Al-Durra1), Cedric Caruna1), S. M. Muyeen1),
and Junji Tamura2)
1)
The Petroleum Institute, UAE, 2)Kitami Institute of Technology,
Japan
DS1G3-13
Vector Control and Synchronization of Brushless
Doubly-Fed Machine for High Power Wind Power
Generation
Kai Ji1,2), Shenghua Huang1), Jun Zhu2), Yue Gao2),
and Chuan Zeng1)
1)
Huazhong University of Science and Technology, China.,
2)
Wuhan Institute of Marine Electric Propulsion of China
Shipbuilding Industry Corporation, China
Monday, October 22
Session DS1G4
Power Converters (1)
Date:
Monday, October 22
Time:13:30-14:45
Venue: Exhibition hall
Chairs: Takaharu Takeshita
Nagoya Institute of Technology, Japan
Chang En Chih
I-Shou University, Taiwan
DS1G4-1
The Large-Size Low-Stray-Parameter Planar Bus Bar
for High Power IGBT-Based Inverters
Liqiang Yuan, Hualong Yu, Xuesong Wang, Zhengming Zhao,
and Ting Lu
Tsinghua University, China
DS1G4-2
Analysis and Comparison of Power Losses in 3L-NPC
Inverter with SHPWM Control
Quan Chen1), Qunjing Wang1), Guoli Li1), and Weidong Jiang2)
1)
Anhui University, China, 2)Hefei University of Technology,
China
DS1G4-3
Basic Characteristic of 5-Level Inverter with Different
Divided DC Link Voltage
T. Matsumoto, T. Akisawa, and K. Matsuse
Meiji University, Japan
DS1G4-4
The Control of Arm Currents and the Parameters for
Modular Multilevel Converters
Yujin Zhang, Qiongxuan Ge, Ruihua Zhang, and Yumei Du
Chinese Academy of Sciences, China
DS1G4-5
Development of Quasi 24-Step Voltage Source
Inverter
Kenta Kawasugi and Shigeo Masukawa
Tokyo Denki University, Japan
DS1G4-6
The Control of Unequal Power Losses Distribution in
Three-Level Neutral-Point-Clamped VSC
Quan Chen1), Qunjing Wang1), Guoli Li1), and Shichuan Ding2)
1)
Anhui University, China, 2)Southeast University, China
DS1G4-7
Space Vector PWM Techniques for Current and
Voltage Source Converters: A Short Review
Shoudao Huang1), Duy C. Pham1,2), Keyuan Huang1),
and Shuangyin Cheng1)
1)
Hunan University, China, 2)Ho Chi Minh City University of
Industry, Vietnam
DS1G4-8
Fuzzy Logic Controlled Voltage Source Converter in
Grid Connected Application via LCL Filter
Marwan Rosyadi1), S. M. Muyeen2), Rion Takahashi1),
and Junji Tamura1)
1)
Kitami Institute of Technology, Japan, 2)The Petroleum Institute,
UAE
ICEMS 2012
DS1G4-9
Power Flow Control of Modular Multilevel Converter
Based on Double-Star Bridge Cells Applying to Grid
Connection
Shin-ichi Hamasaki, Kazuki Okamura, and Mineo Tsuji
Nagasaki University, Japan
DS1G4-10
Experimental Investigation of Effectiveness of
Series Active Filters for Compensation of Uncertain
Harmonic Sources
Bao Cong Hiu, Syuichi Makita, and Yukihiko Sato
Chiba University, Japan
DS1G4-11
Simulation and Analysis of Back-to-Back PWM
Converter for Flywheel Energy Storage System
Song Xu and Haifeng Wang
Chinese Academy of Sciences, China
Monday, October 22
DS1G5-4
Implementation of Hysteresis Model in Transient
Analysis of Nonlinear Reluctance Networks
S. A. Mousavi and G. Engdahl
Royal Institute of Technology, Sweden
DS1G5-5
Study of Copper Losses in the Stator Windings and PM
Eddy-Current Losses for PM Synchronous Machines
Taking into Account Influence of PWM Harmonics
A. Soualmi1,2), F. Dubas2), D. Depernet3), A. Randria1),
and C. Espanet2)
1)
Alstom transport Ornans, France, 2)University of FrancheComte, France, 3)University of Technology Belfort-Montbeliard,
France
DS1G5-6
Design and Challenges of Current Sensing and
Harmonic Extraction for Active Power Filtering for an
Industrial Drive in Oil and Gas Industry
DS1G4-12
Research on Grid-Connected Operation of Novel
Variable Speed Constant Frequency (VSCF) Shaft
Generator System on Modern Ship
Farah Younis, Shamma Al Zaabi, Mona Nader, Wisal Yousif,
and Abdul R. Beig
The Petroleum Institute, UAE
DS1G4-13
Characteristics of a High Frequency Quasi-Resonant
Inverter for Induction Heating Using Power MOSFET
Zhuo Yan1), Chao Zhang2), Qingxin Yang3), Yang Li3), Dahua Xi1),
and Zhihua Wang1)
1)
China Electrotechnical Society, China, 2)Chinese Academy of
Sciences, China, 3)Tianjin Polytechnic University, China
Shan Li, Pingxi Yang, Lifei Liu, Lin Chen, Liuxin Bi, Gang Cui,
and Chao Zhang
Shanghai Marine Equipment Research Institute, China
Masaki Miyamae1), Takahiro Ito1), Kouki Matsuse1),
and Masayoshi Tsukahara2)
1)
Meiji University, Japan, 2)Nippon Thermonics Co., Ltd., Japan
Session DS1G5
Field Analysis and Computation
Date:
Monday, October 22
Time:13:30-14:45
Venue: Exhibition hall
Chair: Takafumi Koseki
The University of Tokyo, Japan
DS1G5-1
Simulation Research of Evaporative Cooling
Technology in Generator Circuit-Breakers
Chengliu Ai, Jianhong Guo, and Haifeng Wang
Chinese Academy of Sciences, China
DS1G5-2
Topology Optimization of Rotor Structure in a PM
Synchronous Motor for Two Current Driving Methods
by Genetic Algorithm Considering the Cluster
Kyoichi Nakayama, Takeo Ishikawa, and Nobuyuki Kurita
Gunma University, Japan
DS1G5-3
Thermoelastic Friction Clutch and Its Operation
Characteristics
Václav Kotlan1), Pavel Kůs2), and Ivo Doležel1)
University of West Bohemia, Czech Republic, 2)Academy of
Sciences of the Czech Republic, Czech Republic
1)
DS1G5-7
Design and Analysis of Cuboid Film Resonator
for Wireless Power Transmission System Based on
Resonant Coupling
DS1G5-8
Torque Ripple Reduction of Wound Rotor Synchronous
Motor Using Rotor Slits
Sang-Hwa Do, Byeong-Hwa Lee, Ho-Young Lee,
and Jung-Pyo Hong
Hanyang University, Korea
Session LS1A
PM Machines and Drives (1)
Date:
Monday, October 22
Time:15:00-16:40
Venue: Room A
Chairs: Hisao Kubota
Meiji University, Japan
Jung Pyo Hong
Hanyang University, Korea
LS1A-115:00-15:20
Study of Cogging Torque in Shaft Permanent Magnet
Synchronous Generator
Gang Cui, Liuxin Bi, Lin Chen, Lifei Liu, Fan Yang, Shan Li,
and Chao Zhang
Shanghai Marine Equipment Research Institute, China
LS1A-215:20-15:40
Cogging Torque and Vibration Analysis of a DirectDriven PM Wind Generator with Concentrated and
Distributed Windings
Jahirul Islam1), Dmitry Svechkarenko1), Robert Chin1),
Aron Szucs2), Juhani Mantere2), and Raimo Sakki2)
1)
ABB Corporate Research Centre, Sweden, 2)ABB Oy, Finland
ICEMS 2012
LS1A-315:40-16:00
Pulsating Torque Reduction of Surface-Mounted
Permanent Magnet Synchronous Motor with Unequal
Slot Angle
Y. Yokoi and T. Higuchi
Nagasaki University, Japan
LS1A-416:00-16:20
Different Novel Methods for Reduction of Low Space
Harmonics for the Fractional Slot Concentrated
Windings
Gurakuq Dajaku1) and Dieter Gerling2)
FEAAM GmbH, Germany, 2)The Universiteät der Bundeswehr
Müenchen, Germany
1)
LS1A-516:20-16:40
Control of Interior Permanent Magnet Synchronous
Motor Drives with Cyclic Fluctuating Load
Yuchao Shi, Kai Sun, Lipei Huang, Yongdong Li, and Xi Xiao
Tsinghua University, China
Session LS1B
Special Machines (1)
Date:
Monday, October 22
Time:15:00-16:40
Venue: Room B
Chairs: Masahide Ooshima
Tokyo University of Science, Japan
Zhuoran Zhang
Nanjing University of Aeronautics and
Astronautics, China
LS1B-115:00-15:20
Rotor Design of a Novel Self-Start Type Permanent
Magnet Synchronous Motor
T. Egawa1), T. Higuchi1), Y. Yokoi1), T. Abe1), Y. Miyamoto2),
and M. Ohto2)
1)
Nagasaki University, Japan, 2)Yaskawa Electric Corporation,
Japan
LS1B-215:20-15:40
A New Parallel Hybrid Excitation Brushless DC
Machine
Weiwei Geng, Zhuoran Zhang, and Li Yu
Nanjing University of Aeronautics and Astronautics, China
LS1B-315:40-16:00
Simple Robust Design of Two-Degree-of-Freedom PID
Controller for Tracking Drives of Linear Servo Motors
S. Yamamoto, H. Hirahara, A. Tanaka, and T. Ara
Polytechnic University, Japan
LS1B-416:00-16:20
Design and Evaluation of Short Armature Core
Double-Sided Transverse Flux Type PMLSM
Jung-Seob Shin1), Takafumi Koseki1), and Houng-Joong Kim2)
1)
The University of Tokyo, Japan, 2)KOVERY Co. Ltd, Korea
LS1B-516:20-16:40
Evaluation of an Electromechanical Clamping System
for Its Integration in a Piezoelectric Linear Motor for
the Generation of High Linear Forces
N. Ferrier, M. Markovic, and Y. Perriard
École Polytechnique Fédérale de Lausanne (EPFL), Switzerland
Monday, October 22
Session LS1C
Distributed Generators
Date:
Monday, October 22
Time:15:00-16:20
Venue: Room C
Chairs: Shin'ya Obara
Kitami Institute of Technology, Japan
S. M. Muyeen
The Petroleum Institute, UAE
LS1C-115:00-15:20
Islanding Prevention Method for Photovoltaic System
by Harmonic Injection Synchronized to Exciting
Current Harmonics of Pole Transformer
Yoshiaki Yoshida1), Hirokazu Suzuki2), Koji Fujiwara1),
and Yoshiyuki Ishihara1)
1)
Doshisha University, Japan, 2)The University of Tokyo, Japan
LS1C-215:20-15:40
Integration and Energy Management of Largescale
Lithium-Ion Battery Energy Storage Station
Xiangjun Li1), Dong Hui1), Ming Xu2), Liye Wang1),
Guangchao Guo1), and Liang Zhang1)
1)
China Electric Power Research Institute of SGCC China,
2)
Zhangjiakou Wind and Solar Power Energy Demonstration
Station Co. Ltd, China
LS1C-315:40-16:00
Maximum Power Point Tracking under Stand-Alone
Operation Using Energy Storage Device
Chan-In Kim, Do-Hyun Kim, Sol Moon, Haw-Seck Lee,
and Joung-Hu Park
Soongsil University, Korea
LS1C-416:00-16:20
Direct Duty-Cycle Control for Maximum Power Point
Tracking of Multimodule Converter
Sol Moon, Do-Hyun Kim, Chan-In Kim, Joung-Won Seo,
and Joung-Hu Park
Soongsil University, Korea
Session LS1D
Power Converters (1)
Date:
Monday, October 22
Time:15:00-16:40
Venue: Room D
Chairs: Keiju Matsui
Chubu University, Japan
Qiongxuan Ge
Chinese Academy of Sciences, China
LS1D-115:00-15:20
A New ZVS Phase Shift-Controlled Class D Full-Bridge
High-Frequency Resonant Inverter for Induction
Heating
Chikanori Takami1), Tomokazu Mishima1),
and Mutsuo Nakaoka2,3)
1)
Kobe University, Japan, 2)Kyungnam University, Korea,
3)
University of Malaysia, Malaysia
ICEMS 2012
LS1D-215:20-15:40
Comparison for Buck Converter with PI, Sliding Mode,
Dynamic Sliding Mode Control
Yigeng Huangfu1), Bo Wang2), Ruiqing Ma1), and Yuren Li1)
Northwestern Polytechnical University, China, 2)Harbin Institute
of Technology, China
1)
LS1D-315:40-16:00
Proposal of SMR Converter Using Indirect-Matrix
Converter
Jun Araki1), Kento Inada2), and Hirohito Funato1)
1)
Utsunomiya University, Japan, 2)Sharp Corporation, Japan
LS1D-416:00-16:20
Analysis of Conducted Electromagnetic Interference
Generated by PWM Inverter Fed- AC Motor Drives
C. Jettanasen
King Mongkut’s Institute of Technology Ladkrabang, Thailand
LS1D-516:20-16:40
A Strategic Load Allocation for Hybrid Power Source
Consisting of EDLC and Battery
Shoken Sunagawa and Naomitsu Urasaki
University of the Ryukyus, Japan
Session DS2G1
Electric Vehicles and Hybrid Electric Vehicles
Date:
Monday, October 22
Time:15:15-16:30
Venue: Exhibition hall
Chairs: Nobukazu Hoshi
Tokyo University of Science, Japan
Yang Huan
Zhejiang University, China
DS2G1-1
A Study of Vehicle Fuel Consumption Simulation
Using VHDL-AMS Multi-Domain Simulation
Shikoh Takakura, Takashi Abe, and Tsuyoshi Higuchi
Nagasaki University, Japan
DS2G1-2
Design of Lion-Battery Storage Management System
with Energy Feedback
Kun Xia, Xinyue Xu, Nuo Ji, and Yin Yuan
University of Shanghai for Science and Technology, China
DS2G1-3
Experimental Verification of Electric Vehicle Using
EDLC
H. Ikeda1), H. Ajishi1), and T. Hanamoto2)
Nishi-Nippon Institute of Technology, Japan, 2)Kyushu Institute
of Technology, Japan
Monday, October 22
DS2G1-5
Design of Bike Inverter Using Adaptive State Observer
of DC-Link
Kyoo Jae Shin1), Hyun Rok Cha2), Young Ju Seo3),
and Jae Young Lim4)
1)
Suncheon First College, Korea, 2)Korea Institute of Industrial
Technology, Korea, 3)SRC Ltd. Co., Korea, 4)Seojin Technology
Ltd. Co., Korea
DS2G1-6
Development of Novel PM Motors for Sport Type
Electric Motorcycles
Daigo Tokunaga and Katsumi Kesamaru
Kyushu University, Japan
DS2G1-7
Development of Torque Coordinating Control of
Permanent-Magnet Motors Driving Electric Vehicle
Based on Identification of Yaw-Rate Controller
Guihua Sun, Guohai Liu, Duo Zhang, and Jinghua Ji
Jiangsu University, China
DS2G1-8
Design of Slipring-less Winding Excited Synchronous
Motor for Hybrid Electric Vehicle
Yoshiaki Kano and Tsuyoshi Mano
Toyota National College of Technology, Japan
DS2G1-9
Comparison of Torque-to-Copper Loss Ratio in
Switched Reluctance and Induction Motors for EV
Applications
Takashi Kenjo and Yuichi Takano
Nidec Corporation, Japan
DS2G1-10
A Novel Brushless Dual-Mechanical-Port Electrical
Machine for Hybrid Electric Vehicle Application
Kai Ji1,2), Shenghua Huang1), Jun Zhu2), Yue Gao2),
and Chuan Zeng1)
1)
Huazhong University of Science and Technology, China,
2)
Wuhan Institute of Marine Electric Propulsion of China
Shipbuilding Industry Corporation, China
Session DS2G2
Induction Machines and Drives (2)
Date:
Monday, October 22
Time:15:15-16:30
Venue: Exhibition hall
Chair: Yoshihiro Kawase
Gifu University, Japan
1)
DS2G1-4
Energy-Saving Operating Strategy of a Catenary Free
Light Rail Transit
Kota Ishino, Kei Sakamoto, and Masafumi Miyatake
Sophia University, Japan
DS2G2-1
Current Compensation Method for Sensorless
Controlled Induction Motors Operated in Low
Switching Frequency
Toshie Kikuchi, Yasuyuki Noto, Hironori Mine,
and Yasushi Matsumoto
Fuji Electric Co., Ltd, Japan
ICEMS 2012
DS2G2-2
Basic Study of Radial Distributions of Electromagnetic
Vibration and Noise in Three-Phase Squirrel-Cage
Induction Motor under Load Conditions
Isao Hirotsuka1), Kazuo Tsuboi1), and Yousuke Takahashi2)
Chubu University, Japan, 2)Toshiba Industrial Products Mfg.,
Japan
1)
DS2G2-3
Reduction of Synchronous Torques in Induction
Machines Using Asymmetrical Rotor Slots
A. Stening and C. Sadarangani
Royal Institute of Technology, Sweden
DS2G2-4
Measurements of Stray Losses in Induction Machines
with Die-Cast Aluminium Rotors
A. Stening, B. Larsson, and C. Sadarangani
Royal Institute of Technology, Sweden
DS2G2-5
A Novel Doubly Fed Induction Generator System with
Fault Ride through Capability
Yang Jiang1), Xiaoyan Huang2), Youtong Fang2), Chris Gerada3),
and Andrew Goodman3)
1)
Zhejiang Institute of Mechanical & Electrical Engineering,
China, 2)Zhejiang University, China, 3)University of Nottingham,
UK
DS2G2-6
Model Predictive Direct Power Control of Doubly-Fed
Wind Power Generation System
Shitao Sun, Dan Sun, and Lunjie Deng
Zhejiang University, China
DS2G2-7
An Analytical Method for Determining Circuit
Parameter of a Solid Rotor Induction Motor
Siyuan Guo1), Libing Zhou1), and Tong Yang2)
1)
Huazhong University of Science and Technology, China,
2)
Beijing Aerospace Control Device Institute, China
DS2G2-8
Improving Short-Term Voltage Stability Problems by
Variable-Speed Air-Conditioners
Xuemei He, Rongxiang Zhao, Chong Zhu, and Huan Yang
Zhejiang University, China
DS2G2-9
Analysis and Failure Diagnosis of Squirrel-Cage
Induction Motor with Broken Rotor
T. Ishikawa, R. Ishigame, M. Matsunami, and N. Kurita
Gunma University, Japan
Monday, October 22
Session DS2G3
Micro-Grid and Energy System
Date:
Monday, October 22
Time:15:15-16:30
Venue: Exhibition hall
Chairs: Noriyuki Kimura
Osaka Institute of Technology, Japan
Chang En Chih
I-Shou University, Taiwan
DS2G3-1
Study on the Energy Storage Characteristics of CO2
Gas-Hydrate
Masahito Kawai1) and Shin'ya Obara2)
1)
Hakodate National College of Technology, Japan, 2)Kitami
Institute of Technology, Japan
DS2G3-2
Independent Control of Rectifiers Connected to SMES
in AC Loop Microgrid System
Shohei Kanda, Yuuki Hayashi, and Masafumi Miyatake
Sophia University, Japan
DS2G3-3
A Digital Control of Power Leveling Unit with Super
Capacitor for Distributed Generator
Shin-ichi Hamasaki, Sho Yoshioka, and Mineo Tsuji
Nagasaki University, Japan
DS2G3-4
Stability Enhancement of a Hybrid Micro-Grid System
in Grid Fault Condition
Mir Nahidul Ambia, Ahmed Al-Durra, Cedric Caruana,
and S. M. Muyeen
The Petroleum Institute, UAE
DS2G3-5
Multi-Objective Optimal Compensation of a MultiFunctional Grid-Connected Inverter for Power Quality
Enhancement
Chong Cheng, Zheng Zeng, Huan Yang, and Rongxiang Zhao
Zhejiang University, China
DS2G3-6
A Study on Continuous Operation of Distributed
Generator with DVR in Case of Instantaneous Voltage
Drop
H. Toita1), T. Ninomiya2), K. Yukita2), Y. Goto2), and K. Ichiyanagi2)
1)
Hitachi Engineering & Services Co., Ltd., Japan, 2)Aichi Institute
of Technology, Japan
DS2G3-7
Development of a Gas-Hydrate Power Generation
System
Ryohei Shimizu, Shinya Obara, Manabu Okuda,
and Ryota Yamamoto
Kitami Institute of Technology, Japan
DS2G3-8
Operation Planning of a Compound Energy System
Using Orthogonal Table-GA Hybrid Analyzing Method
Seizi Watanabe1), Shin’ya Obara2), and Masaharu Munetomo3)
1)
Kushiro National College of Technology, Japan, 2)Kitami Institute
of Technology, Japan, 3)Hokkaido University, Japan
ICEMS 2012
DS2G3-9
Fundamental Examination on the Dissociation and
Expansion Characteristics of CO2 Hydrate Using the
Gas-Hydrate Generator
Manabu Okuda, Shin’ya Obara, and Ryohei Shimizu
Kitami Institute of Technology, Japan
Session DS2G4
Analysis of Power Apparatus
Date:
Monday, October 22
Time:15:15-16:30
Venue: Exhibition hall
Chair:
Rion Takahashi
Kitami Institute of Technology, Japan
DS2G4-1
Study on a Novel Flat Winding Transformer with
Sandwich Construction Magnet Core in CPS System
for High Speed Transportation
Ying Zhang, Yumei Du, Ruihua Zhang, and Liming Shi
Chinese Academy of Sciences, China
DS2G4-2
Discriminating among Inrush Current, External Fault
and Internal Fault in Power Transformer Using Low
Frequency Components Comparison of DWT
Chaiyan Jettanasen, Chaichan Pothisarn, Jittiphong Klomjit,
and Atthapol Ngaopitakkul
King Mongkut’s Institute of Technology Ladkrabang, Thailand
DS2G4-3
Finite Element Modeling of Power Transformer for
Short-Circuit Electromagnetic Force Analysis
Hyun-Mo Ahn1), Byuk-Jin Lee1), Cherl-Jin Kim2),
Heung-Kyo Shin3), and Sung-Chin Hahn1)
1)
Dong-A University, Korea, 2)Halla University, Korea,
3)
Gyeongsang National University, Korea
DS2G4-4
Behaviour of Interturn Fault in Power Transformer
Winding Using High Frequency Components of
Discrete Wavelet Transform
Jittiphong Klomjit and Atthapol Ngaopitakkul
King Mongkut’s Institute of Technology Ladkrabang, Thailand
Monday, October 22
DS2G4-7
Loss Analysis of Large Reactor for Power Conditioning
System Considering Harmonic Components
Jung-Hwan Kim1), Hae-Joong Kim1), Jeong-Soo Kim2),
and Jung-Pyo Hong1)
1)
Hanyang University, Korea, 2)S-Powertech, Korea
DS2G4-8
Design of Outer Rotor Type Induction Motor Having
High Power Density for In-Wheel System
Hyun Rok Cha1), Tae Won Jeong1), Dae Yeong Im1),
Kyoo Jae Shin2), and Young Ju Seo3)
1)
Korea Institute of Industrial Technology, Korea, 2)Suncheon First
College, Korea, 3)SRC Ltd. Co., Korea
DS2G4-9
The Study of Evaporative Cooling Technology in the
Rectification Devices
Zhenguo Li, Feihui Liu, and Bin Xiong
Chinese Academy of Sciences, China
DS2G4-10
Semi-Analytical Modeling of the End-Winding SelfInductance in Large AC Machines
H. Grop1), J. Soulard1), A. Krings1), and H. Persson2)
1)
Royal Institute of Technology, Sweden, 2)ABB Machines,
Sweden
DS2G4-11
Efficiency Dependence on Wire Type for Wireless
Power Transfer of Magnetic Resonant Coupling
T. Mizuno, T. Ueda, S. Yachi, R. Ohtomo, and Y. Goto
Shinshu University, Japan
Session DS2G5
Renewable Energy (1)
Date:
Monday, October 22
Time:15:15-16:30
Venue: Exhibition hall
Chair:
Masaki Yagami
Hokkaido Institute of Technology, Japan
DS2G5-1
Mitigation of Load Frequency Fluctuation Using a
Centralized Pitch Angle Control of Wind Turbines
DS2G4-5
Accuracy Comparison of Phase-and Time-Domain
Methods for PD Location in Power Cable
Junqiao Liu1), Marwan Rosyadi1), Rion Takahashi1), Junji Tamura1),
Tomoyuki Fukushima2), Atsushi Sakahara2), Koji Shinya2),
and Kazuki Yoshioka2)
1)
Kitami Institute of Technology, Japan, 2)Hokkaido Electric Power
Co, Japan
DS2G4-6
The Application of Evaporative Cooling Technology in
Generator Circuit Breaker
DS2G5-2
A Derivation of Simulation Model of Offshore
Wind Farm with Losses and Annual Capacity Factor
Considered
Redy Mardiana and Ahmad Fajar Firdaus
The Petroleum Institute, UAE
Jian Hong Guo1), Hai Feng Wang1), Ai Chengliu1), Fu De Ping1),
Gu Guo Biao1), and Cheng Li2)
1)
Chinese Academy of Sciences, China, 2)Xian XD Swithgear
Electric CO. LTD, China
Naoya Inaba1), Rion Takahashi1), Junji Tamura1),
Mamoru Kimura2), Akiyoshi Komura2), and Kenji Takeda2)
1)
Kitami Institute of Technology, Japan, 2)Hitachi, Ltd., Japan
ICEMS 2012
DS2G5-3
Control Scheme of a Superconducting Synchronous
Generator Applied to a Grid-Connected Wind Power
Generation System
G. H. Kim1), K. M. Kim1), H. J. Sung1), S. J. Jung1), S. Kim1),
M. Park1), I. K. Yu1), and S. Lee2)
1)
Changwon National University, Korea, 2)Uiduk University,
Korea
DS2G5-4
Stabilization of Fixed Speed Wind Generator by Using
Variable Speed PM Wind Generator in Multi-Machine
Power System
Marwan Rosyadi1), S. M. Muyeen2), Rion Takahashi1),
and Junji Tamura1)
1)
Kitami Institute of Technology, Japan, 2)The Petroleum Institute,
UAE
DS2G5-5
Dynamic Simulation of PMSG Small Wind Turbine
Generation System with HCS-MPPT Control
Shota Yamakura and Katsumi Kesamaru
Kyushu University, Japan
DS2G5-6
Current Peak Reduction of Voltage Source Converter
Exciting Induction Generator for Wind Power
Generation
Yoshinori Sakoda, Noriyuki Kimura, Toshimitsu Morizane,
and Hideki Omori
Osaka Institute of Technology, Japan
DS2G5-7
MPPT Control Technique for a PMSG Wind Generation
System by the Estimation of the Wind Speed
Hye-Su Shin1), Chengde Xu1), Joon-Min Lee1), Jae-Du La2),
and Young-Seok Kim1)
1)
Inha University, Korea, 2)Inha Technical College, Korea
DS2G5-8
Wind Generator Stability Enhancement by Using
an Adaptive Artificial Neural Network-Controlled
Superconducting Magnetic Energy Storage
Hany M. Hasanien1), S. Q. Ali1), and S. M. Muyeen2)
1)
King Saud University, Saudi Arabia, 2)The Petroleum Institute,
UAE
DS2G5-9
Withdrawn
DS2G5-10
Efficient Output Power Control Scheme for StandAlone Wind Generator in Weak Wind Condition
Daichi Watanabe1), Rion Takahashi1), Junji Tamura1),
Tomomichi Ito2), Mamoru Kimura2), and Akiyoshi Komura2)
1)
Kitami Institute of Technology, Japan, 2)Hitachi, Ltd., Japan
Monday, October 22
Session LS2A
Electric Vehicles and Hybrid Electric Vehicles
Date:
Monday, October 22
Time:17:00-18:40
Venue: Room A
Chairs: Takashi Abe
Nagasaki University, Japan
Guohai Liu
Jiangsu University, China
LS2A-117:00-17:20
A Novel Approach for the Unit Commitment with
Vehicle-to-Grid
Lei Jin, Huan Yang, Fangbin Cheng, Yuying Zhou,
and Rongxiang Zhao
Zhejiang University, China
LS2A-217:20-17:40
Input Impedance Matched AC-DC Converter in
Wireless Power Transfer for EV Charger
Keisuke Kusaka and Jun-ichi Itoh
Nagaoka University of Technology, Japan
LS2A-317:40-18:00
A study on the Design Method of the Light Weight
Coils for a High Power Contactless Power Transfer
Systems
T. Maruyama1), K. Yamamoto1), S. Kitazawa1), K. Kondo1),
and T. Kashiwagi2)
1)
Chiba University, Japan, 2)Railway Technical Research Institute,
Japan
LS2A-418:00-18:20
Vector Control of Two Phase Inverter for Driving Three
Phase Motor
Jun Matsuoka and Masayuki Morimoto
Tokai University, Japan
LS2A-518:20-18:40
Design of NdFeB Bond Magnets for In-Wheel
Permanent Magnet Vernier Machine
Kazuhiro Sato, Ryota Hosoya, and Shoji Shimomura
Shibaura Institute of Technology, Japan
Session LS2B
Special Machines (2)
Date:
Monday, October 22
Time:17:00-18:40
Venue: Room B
Chairs: Kenji Nakamura
Tohoku University, Japan
Aimeng Wang
North China Electric Power University, China
LS2B-117:00-17:20
Vector Magnetic Characteristic Analysis of Segment
Type Synchronous Reluctance Motor Utilizing GrainOriented Electrical Steel Sheet
Ryuichi Koga, Takashi Todaka, and Masato Enokizono
Oita University, Japan
ICEMS 2012
LS2B-217:20-17:40
A Study on a Bearingless Drive of a Surface Permanent
Magnet Synchronous Motor
Masashi Sawada1), Yuji Shindo1), Tomoaki Tamiya1),
Yoshihiro Kawase2), Tadashi Yamaguchi2), Hirokatsu Katagiri2),
Yuki Ono2), and Takashi Kodera2)
1)
Kawasaki Heavy Industries, Ltd., Japan, 2)Gifu University, Japan
LS2B-317:40-18:00
Suspending Force Control of a Novel 12/14 Hybrid
Stator Pole Type Bearingless SRM
Zhenyao Xu, Dong-Hee Lee, and Jin-Woo Ahn
Kyungsung University, Korea
Monday, October 22
LS2C-418:00-18:20
Coordinated Control for Active and Reactive Power
of PMSG-Based Wind Turbine to Enhance the LVRT
Capability
Shuhui Dong, Yi Wang, and Heming Li
North China Electric Power University, China
LS2C-518:20-18:40
Efficiency Calculation and Improvement of a LargeDiameter Ironless Permanent Magnet Generator
Zhaoqiang Zhang1), Marta Molinas1), Alexey Matveev2),
Robert Nilssen1), and Arne Nysveen1)
1)
Norwegian University of Science and Technology, Norway,
2)
SmartMotor AS, Norway
LS2B-418:00-18:20
Magnetic Levitation Tests of a Time-Divided Torque
and Suspension Force Control Type Bearingless Motor
M. Ooshima, K. Miyashita, and M. Nakagawa
Tokyo University of Science, Japan
LS2B-518:20-18:40
Development of Axial Gap Microhydro-Electric
Generators Utilizing Magnetic Material Attached Flux
Concentrated Permanent Magnets
Katsuyuki Shiota, Takashi Todaka, and Masato Enokizono
Oita University, Japan
Session LS2C
PM Machines and Drives (2)
Date:
Monday, October 22
Time:17:00-18:40
Venue: Room C
Chairs: Satoshi Ogasawara
Hokkaido University, Japan
Zhuoran Zhang
Nanjing University of Aeronautics and
Astronautics, China
LS2C-117:00-17:20
Sinusoidal Back-EMF of Vernier Permanent Magnet
Machines
Dawei Li and Ronghai Qu
Huazhong University of Science and Technology, China
LS2C-217:20-17:40
Artificial Immune System Based Design of Current
Controlled Voltage Source Converter for PM Wind
Generator
Marwan Rosyadi1), S. M. Muyeen2), Rion Takahashi1),
and Junji Tamura1)
1)
Kitami Institute of Technology, Japan, 2)The Petroleum Institute,
UAE
LS2C-317:40-18:00
Design and Analysis of a Low Voltage Regulation PM
Brushless DC Generator
Wenjun Yu and Zhuoran Zhang
Nanjing University of Aeronautics and Astronautics, China
Session LS2D
PM Machines and Drives (3)
Date:
Monday, October 22
Time:17:00-18:20
Venue: Room D
Chairs: Takeo Ishikawa
Gunma University, Japan
Yves Perriard
École Polytechnique Fédérale de Lausanne
(EPFL), Switzerland
LS2D-117:00-17:20
Study on the High Accuracy Vector Control System
of Direct Drive Permanent-Magnet Synchronous
Machine
Shaoshen Xue, Haiping Xu, Cheng Fang, Weikun Niu,
and Shan Xue
Chinese Academy of Sciences, China
LS2D-217:20-17:40
Research on Brushless DC Motor Based on New Type
Electromagnetic Position Sensor
Jinglin Liu, Lianghui Dong, and Gang Wang
Northwestern Polytechnical University, China
LS2D-317:40-18:00
Noble Control Strategy for Single Phase Input Indirect
Matrix Converter Used for Sensorless PMSM Drive of
Air-Conditioner
Noriyuki Kimura1), Toshimitsu Morizane1), Takashi Fukuei2),
Masanori Ogawa2), and Hideo Matsushiro2)
1)
Osaka Institute of Technology, Japan, 2)Panasonic Corporation,
Japan
LS2D-418:00-18:20
An Improved Torque Feed-Forward Control with
Observer-Based Inertia Identification in PMSM Drives
Shouhua Zhao1), Lin Cui1), Guiying Liu2), and Yangsheng Chen1)
Zhejiang University, China, 2)Guangxi Teachers Education
University, China
1)
ICEMS 2012
Session LS2E
High Voltage and Power Transformers
Date:
Monday, October 22
Time:17:00-18:40
Venue: Room E
Chair: Hiroyuki Kita
Hokkaido University, Japan
LS2E-117:00-17:20
Evaluation of Discharge Characteristics on the Triple
Junction for Development of the Gas-Insulated
Switchgear
Jae-Hyun Song, Joon-Yeon Kim, Bok-Yeol Seok,
and Young-Chan Choi
Hyundai Heavy Industries CO., LTD., Korea
LS2E-217:20-17:40
Characteristics of Charge Accumulation on Coated
Electrode in SF6 Gas
S. Kainaga, T. Miyamoto, M. Yoshimura, and T. Tsurimoto
Mitsubishi Electric Corporation, Japan
LS2E-317:40-18:00
Oil Gap Dependence of Partial Discharge Starting
Point in the Oil/Pressboard Composite Insulation
System
Takahiro Umemoto1), Soichiro Kainaga1), Takao Tsurimoto1),
Hirotaka Muto1), Takahiko Ishikura1), Naoki Sugitani2),
Norio Morita2), Masahiro Kozako2), and Masayuki Hikita2)
1)
Mitsubishi Electric Corporation, Japan, 2)Kyushu Institute of
Technology, Japan
LS2E-418:00-18:20
A Medium-Frequency Transformer with Multiple
Secondary Windings for Grid Connection through
H-Bridge Voltage Source Converters
Md Rabiul Islam, Youguang Guo, and Jianguo Zhu
University of Technology Sydney, Australia
LS2E-518:20-18:40
FEM Modeling of Skin and Proximity Effects for
Coreless Transformers
Pascal Meyer, Paolo Germano, and Yves Perriard
École Polytechnique Fédérale de Lausanne (EPFL), Switzerland
Monday, October 22
ICEMS 2012
Tuesday, October 23
Session LS3B
Special Lecture
Induction Machines and Controls (1)
Date:
Tuesday, October 23
Time:10:00-11:30
Venue: Room A
Chair: Yukihiko Sato
Chiba University, Japan
10:00-10:45
Future Power Grid and High Tc Superconducting
Power Transmission
L.Y. Xiao, L.Z. Lin, S.T. Dai, Y. Liu, and M.M. Xu
Chinese Academy of Sciences, China
Bearingless PM Motor Levitation Systems
10:45-11:30
Andreas Binder and Gabriel Munteanu
Darmstadt University of Technology, Germany
Session LS3A
Vehicle and Railway Technologies
Date:
Tuesday, October 23
Time:13:00-14:40
Venue: Room B
Chairs: Makoto Matsushita
Toshiba Corporation, Japan
Dieter Gerling
University of Federal Defense, Germany
LS3B-113:00-13:20
Loss Optimization Drive of Multiple Induction Motors
by Coordination Control
Fei Xu, Liming Shi, and Yaohua Li
Chinese Academy of Sciences, China
LS3B-213:20-13:40
Loss Evaluation on Induction Machines Made with
Soft Magnetic Composite
S. Inoue1), S. Shimomura1), and M. Morimoto2)
1)
Shibaura Institute of Technology, Japan, 2)Tokai University,
Japan
Date:
Tuesday, October 23
Time:13:00-14:40
Venue: Room A
Chairs: Masayuki Morimoto
Tokai University, Japan
Yang Huan
Zhejiang University, China
Keisuke Fujisaki1), Masaki Sakai1,2), and Shinya Takeda1)
1)
Toyota Technological Institute, Japan, 2)Daikin Industries, Ltd.,
Japan
LS3A-113:00-13:20
Visual and Voice Instruction for Vehicle Navigation
Using UHF RF-ID System
LS3B-414:00-14:20
Detection of Induction Motor Faults Using Direct
Wavelet Transform Technique
A. Yoshida, H. Kato, T. Kawamura, T. Kashiwa, and K. Taguchi
Kitami Institute of Technology, Japan
LS3A-213:20-13:40
Investigation and Optimal Design of Output
Capacitance in Chopper by High Speed Voltage
Response Control
Jun-ichi Itoh, Daisuke Sato, and Takayuki Shibuya
Nagaoka University of Technology, Japan
LS3A-313:40-14:00
Smart Charging Control for Electrical Vehicles Based
on Two-Level Charge Management System
Zengquan Yuan, Haiping Xu, Huachun Han, and Yingjie Zhao
Chinese Academy of Sciences, China
LS3B-313:40-14:00
Motor Loss Increment of Induction Motor Driven by
PWM Inverter in Comparison with Inverter Circuit
Loss
Hew Wooi Ping and Khalaf Salloum Gaeid
University of Malaya, Malaysia
LS3B-514:20-14:40
Prediction of Additional Power and Iron Losses of
Inverter Fed Asynchronous Induction Machines of
Traction Drives
Erich Schmidt1), Florian Müllner2), and Harald Neudorfer2)
1)
Vienna University of Technology, Austria, 2)Traktionssysteme
Austria, Austria
Session LS3C
PM Machines and Drives (4)
LS3A-414:00-14:20
A Study on Energy Management System for Hybrid
Powered Railway Vehicles with Fuel Cells and Electric
Double Layer Capacitors
Kenta Tsukahara and Keiichiro Kondo
Chiba University, Japan
Date:
Tuesday, October 23
Time:13:00-14:40
Venue: Room C
Chairs: Kazumi Kurihara
Ibaraki University, Japan
Jung Pyo Hong
Hanyang University, Korea
LS3A-514:20-14:40
Energy-Saving Operation of an Electric Train at
Multiple Service Section Based on Sensitivity Analysis
of Energy Consumption to Running Time
LS3C-113:00-13:20
Optimization Design and Analysis of a 30kW Interior
Permanent Magnet Synchronous Motor Used in
Electric Vehicles
Takafumi Koseki, Yuto Takahashi, and Zhe Yang
The University of Tokyo, Japan
Rong Fu1,2) and Manfeng Dou1)
Northwestern Polytechnical University, China, 2)Weinan
Teachers University, China
1)
ICEMS 2012
LS3C-213:20-13:40
Automatic Design Method Considering the Frequently
Used Area of a PMSM for an HEV
Tomohiro Yamada and Kan Akatsu
Shibaura Institute of Technology, Japan
LS3C-313:40-14:00
Local Iron Loss Identification by Thermal
Measurements on an Outer-Rotor Permanent Magnet
Synchronous Machine
Andreas Krings, Shafigh Nategh, Oskar Wallmark,
and Juliette Soulard
Royal Institute of Technology, Sweden
LS3C-414:00-14:20
Output Maximization of Salient-Pole Synchronous
Machines by Using Additional Permanent Magnets
Katsumi Yamazaki1), Shuichi Tamiya1), Kazuo Shima2),
Tadashi Fukami2), and Masato Sato2)
1)
Chiba Institute of Technology, Japan, 2)Kanazawa Institute of
Technology, Japan
LS3C-514:20-14:40
A Consideration of Electric and Magnetic Networks
for Calculating Eddy Current Loss in SPM Motor
Yukihiro Yoshida, Kenji Nakamura, and Osamu Ichinokura
Tohoku University, Japan
Session LS3D
PM Machines and Drives (5)
Date:
Tuesday, October 23
Time:13:00-14:20
Venue: Room D
Chairs: Kazuto Sakai
Toyo University, Japan
Xiaoyuan Wang
Tianjin University, China
LS3D-113:00-13:20
MTPA Control of PMSM System Considering
Saturation and Cross-Coupling
Zheng Li and Hongmei Li
Hefei University of Technology, China
LS3D-213:20-13:40
Investigation of Field Regulation Characteristic of a
Hybrid Excitation Synchronous Machine with Axial
Auxiliary Air-Gaps
Shengjie Ma and Zhuoran Zhang
Nanjing University of Aeronautics and Astronautics, China
LS3D-313:40-14:00
Effect of Magnetization on High-Speed Permanent
Magnet Synchronous Motor Design
H. N. Phyu and Bi Chao
Data Storage Institute, Singapore
LS3D-414:00-14:20
Comparison between PAM Control and Flux
Weakening Control for PMSM Drive
Yasuhiro Matsumura and Naomitsu Urasaki
University of the Ryukyus, Japan
Tuesday, October 23
Session LS3E
Synchronous Machines and Controls
Date:
Tuesday, October 23
Time:13:00-14:40
Venue: Room E
Chair: Mamoru Kimura
Hitachi, Ltd., Japan
LS3E-113:00-13:20
A Novel Torque Ripple Reduction Strategy for
Predictive Direct Torque Controlled PMSG
Zhongqi Wan and Heng Nian
Zhejiang University, China
LS3E-213:20-13:40
Sensorless Control of PMSG Based on Dual TwoLevel Inverter Open Winding Configuration for Wind
Turbines
Yijie Chou and Heng Nian
Zhejiang University, China
LS3E-313:40-14:00
A Novel Tangential Radial Hybrid Excitation
Synchronous Variable Frequency Aircraft Generator
Yinhang Ning, Chuang Liu, Renhua Jiang, Jianchun Xu,
and Shushu Zhu
Nanjing University of Aeronautics and Astronautics, China
LS3E-414:00-14:20
FEM Based Design of Third Harmonic Excitation
System for Low Voltage Salient Pole Synchronous
Generators
K. S. Jiji1), Jayadas N. H.2), and C. A. Babu2)
1)
Rajiv Gandhi Institute of Technology, India, 2)Cochin University
of Science and Technology, India
LS3E-514:20-14:40
Study of Carbon Brush Characteristic of Turbine
Generator (2nd Report)
Makoto Takanezawa1), Daisuke Hiramatsu1), Masashi Kobayashi1),
Mikio Kakiuchi1), Ken Nagakura1), Noboru Morita2),
and Toru Otaka1)
1)
Toshiba Corporation, Japan, 2)Formerly Nippon Institute of
Technology, Japan
Session DS3G1
PM Machines and Drives (3)
Date:
Tuesday, October 23
Time:15:00-16:15
Venue: Exhibition hall
Chairs: Tsuyoshi Higuchi
Nagasaki University, Japan
Jinglin Liu
Northwestern Polytechnical University, China
DS3G1-1
Design of Surface Permanent Magnet-Type Vernier
Motor
Hironori Kakihata1), Yasuhiro Kataoka1), Masakazu Takayama1),
Yoshitarou Matsushima2), and Yoshihisa Anazawa1)
1)
Akita Prefectural University, Japan, 2)Shizuoka University, Japan
ICEMS 2012
DS3G1-2
Comparison of Three Magnet Array-Type Rotors in
Surface Permanent Magnet-Type Vernier Motor
Yasuhiro Kataoka1), Masakazu Takayama1),
Yoshitarou Matsushima2), and Yoshihisa Anazawa1)
1)
Akita Prefectural University, Japan, 2)Shizuoka University, Japan
DS3G1-3
Characteristic Analysis of Slotted-Type Axial-Flux
Permanent Magnetic Couplers
Sheng-An You, Sheng-He Wang, Mi-Ching Tsai,
and Shang-Hsun Mao
National Cheng Kung University, Taiwan
DS3G1-4
Design of High-Power Density and Low-Volume Motor
Based on Evaporation-Cooling Technology
Tuesday, October 23
Session DS3G2
PM Machines and Drives (4)
Date:
Tuesday, October 23
Time:15:00-16:15
Venue: Exhibition hall
Chairs: Noriyuki Kimura
Osaka Institute of Technology, Japan
Bruno Dehez
Université catholique de Louvain, Belgium
DS3G2-1
Study and Detection of Demagnetization in Line Start
Permanent Magnet Synchronous Machines Using
Artificial Neural Network
Yuanfeng Huang, Haifeng Wang and Guobiao Gu
Chinese Academy of Sciences, China
Xiaomin Lu, K. Lakshmi Varaha Iyer, Kaushik Mukherjee,
and Narayan C. Kar
University of Windsor, Canada
DS3G1-5
A New Hybrid-Excited Flux-Switching Machine with
Excitation Coils in Stator Slots
DS3G2-2
Performance of 2. 4-MW Permanent Magnet
Generator in Converter Drive
Benjamin Gaussens1,2), Emmanuel Hoang1), Michel Lécrivain1),
Philippe Manfe2), and Mohamed Gabsi1)
1)
UniverSud, France, 2)Leroy Somer, France
Masahiro Hori, Mamoru Kimura, Akiyoshi Komura,
Daisuke Kori, Seikichi Masuda, and Takayuki Koizumi
Hitachi, Ltd., Japan
DS3G1-6
Study of Disk Type Corelss Permanent Magnet
Synchronous Generator Applied in Ocean Current
Energy System
DS3G2-3
High-Efficiency Interior Permanent-Magnet
Synchronous Generators with Minimal Voltage
Regulation for Nano and Pico Hydro Generation
Xiaoyuan Wang, Jiahong Yan, and Gengji Wang
Tianjin University, China
DS3G1-7
Electronic Motors Capable of Pole-Changing and
Variable Machine Constants
Takanori Niizuma and Kazuto Sakai
Toyo University, Japan
DS3G1-8
Spiral Flux Motor with Torus Coils
Hiroki Yokose and Kazuto Sakai
Toyo University, Japan
DS3G1-9
Parallel Hybrid Excitation Synchronous Machine
Optimization for Railway Application
B. Nedjar1), L. Vido2), F. Gillon3), P.-H. Nguyen1), K. Ngoc-Vu1),
and M. Gabsi1)
1)
UniverSud, France, 2)Université de Cergy-Pontoise, France,
3)
École Centrale de Lille, France
DS3G1-10
Analysis and Comparison of Classical and Flex-PCB
Slotless Windings in BLDC Motors
Bruno Dehez1), Miroslav Markovic1), and Yves Perriard2)
1)
Université catholique de Louvain, Belgium, 2)École
Polytechnique Fédérale de Lausanne (EPFL), Switzerland
K. Kurihara1), T. Kubota1), K. Saito1), N. Kikuchi2),
and H. Iwamoto2)
1)
Ibaraki University, Japan, 2)IBASEI Ltd., Japan
DS3G2-4
Research on Vibration Characteristics of Rotor of High
Speed Permanent Magnet Synchronous Machine
Cheng Fang, Haiping Xu, Shaoshen Xue, and Shan Xue
Chinese Academy of Sciences, China
DS3G2-5
Shaft Voltage Comparison between Grounded and
Ungrounded Brushless DC Motors with Insulated
Rotor Driven by PWM Inverter
Tatsuo Maetani1), Shigeo Morimoto2), Kichiro Yamamoto3),
Yoshinori Isomura1), Akihiko Watanabe1), and Keisaku Nakano1)
1)
Panasonic Corporation, Japan, 2)Osaka Prefecture University,
Japan, 3)Kagoshima University, Japan
DS3G2-6
Study of Flywheel Energy Storage System for Power
Leveling of Wave Power Generation System
T. Yoshida, M. Sanada, S. Morimoto, and Y. Inoue
Osaka Prefecture University, Japan
DS3G2-7
Characteristic of PMASynRM with Ferrite Magnets for
EV/HEV Applications
Masahiro Obata, Shigeo Morimoto, Masayuki Sanada,
and Yukinori Inoue
Osaka Prefecture University, Japan
ICEMS 2012
Tuesday, October 23
DS3G2-8
Real Time Implementation of the BESS to Smoothen
the Output Power Fluctuation of the Variable Speed
Wind Turbine Generator
1)
1)
1)
Adnan Sattar , Ahmed Al Durra , Cedric Caruana ,
S. M. Muyeen1), and Junji Tamura2)
1)
The Petroleum Institute, UAE, 2)Kitami Institute of Technology,
Japan
Session DS3G3
Special Machines and Designing
Date:
Tuesday, October 23
Time:15:00-16:15
Venue: Exhibition hall
Chairs: Takashi Kosaka
Nagoya Institute of Technology, Japan
Nashed Maged Naguib F.
Electronics Research Institute, Egypt
DS3G3-1
Fundamental Analysis for a Ferrite Permanent Magnet
Axial Gap Motor with Coreless Rotor Structure
Kazuya Chiba, Shinji Chino, Masatsugu Takemoto,
and Satoshi Ogasawara
Hokkaido University, Japan
DS3G3-2
Demagnetization Characteristic Analysis of Inset-TypeFlux-Reversal Machines
Heung-Kyo Shin1), Tae Heoung Kim1), and Cherl-Jin Kim2)
1)
Gyeongsang National University, Korea, 2)Halla University,
Korea
DS3G3-3
Optimization of PPMT Machine Using Higher-Order
Finite Element Method
Mach František1), Pánek David1), Doležel Ivo1), Karban Pavel1),
and Kůs Pavel2)
1)
University of West Bohemia, Czech Republic, 2)Academy of
Sciences of the Czech Republic, Czech Republic
DS3G3-4
Magnetic Field and Performance Analysis of Novel
Double-Side Tubular Permanent Magnet Machines
Liang Guo1) and Hao Ding2)
1)
Zhejiang Sci-Tech University, China, 2)Zhejiang Institute of
Quality Inspection Science, China
DS3G3-5
Improvement on the Core Loss of High Speed Slotless
PMBLDC Motor and Its Measurement
Guo-Jhih Yan, Rong-Bin Lin, and Ming-Hung Jian
Micro/Meso Mechanical Manufacturing, Taiwan
DS3G3-6
A Basic Study for an Elevator Emergency Stop Device
Utilizing M. R. Fluid
Yuuki Nagano1), Toshiko Nakagawa1), and Kazuo Suzuki2)
1)
Tokyo City University, Japan, 2)Hitachi Building Systems Co.,
Ltd., Japan
DS3G3-7
Analysis Method of Long-Time Behavior of Circuit
Breaker with Oil Dashpot
S. Suzuki1), Y. Kawase1), T. Yamaguchi1), S. Toyama1),
W. Koyanagi1), K. Hirata2), and T. Ota3)
1)
Gifu University, Japan, 2)Osaka University, Japan, 3)Panasonic
Corporation, Japan
DS3G3-8
Design of a Drinking Water Filtration System with
Intelligent and Security Management
Kun Xia, Xin-shen Liao, Xin-yue Xu, and Yue Ge
University of Shanghai for Science and Technology, China
DS3G3-9
Non-Contact Hand Motion Classification Technique
for Application to Human Machine Interfaces
K. Kurita
Kinki University, Japan
DS3G3-10
Rotor Design Optimization for a Reaction Sphere
Actuator
L. Rossini1), S. Mingard2), A. Boletis2), E. Forzani2), E. Onillon1),
and Y. Perriard3)
1)
Swiss Center for Electronics and Microtechnology, Switzerland,
2)
maxon motor ag, Switzerland, 3)École Polytechnique Fédérale
de Lausanne (EPFL), Switzerland
DS3G3-11
A Design Method of Voice Coil Type High Speed
Actuator for Valve Operation
Baek Ju Sung and Do Sik Kim
Korea Institute of Machinery & Materials, Korea
DS3G3-12
Design Optimization of Permanent Magnetic Actuator
for Vacuum Circuit Breaker by Response Surface
Method
Young-Jo Kim1), Jong-Deok Lee2), Byuk-Jin Lee2),
Heung-Kyo Shin3), and Sung-Chin Hahn2)
1)
Yuhan University, Korea, 2)Dong-A University, Korea,
3)
Gyeongsang National University, Korea
DS3G3-13
Static and Dynamic Characteristics of Pulsed Actuator
with Plunger Consisting of Iron Core and Permanent
Magnet
Ivo Doležel1), David Pánek2), and Bohuš Ulrych2)
1)
Czech Technical University, Czech Republic, 2)University of
West Bohemia, Czech Republic
ICEMS 2012
Tuesday, October 23
Session DS3G4
DS3G4-9
Power Smoothing System Using Electric Double Layer
Capacitor
Power Converters (2)
Date:
Tuesday, October 23
Time:15:00-16:15
Venue: Exhibition hall
Chair: Hiromi Inaba
The University of Shiga Prefecture, Japan
DS3G4-1
Harmonic Current Elimination for Single-Phase
Rectifiers Based on PR Controller with Notch Filter
Jin Huang1), Yang Lu1), Bo Zhang1), Na Wang2),
and Wensheng Song2)
1)
China Academy of Railway Sciences, China, 2)Southwest
Jiaotong University, China
DS3G4-2
A Novel Voltage Source Converter for Low Voltage DC
System Based on High Input AC Voltage Applications
Chunwei Song1), Rongxiang Zhao1), Minglei Zhu1),
Wangqing Lin2), and Fangbin Cheng1)
1)
Zhejiang University, China, 2)Zhejiang Provincial Natural Gas
Development Co., Ltd., China
DS3G4-3
The Pursuit of Optimum Chopper Circuits for Power
Factor Corrections
Yuhta Ando, Keiju Matsui, Masaru Hasegawa, and Fukashi Ueda
Chubu University, Japan
DS3G4-4
A Novel Control Strategy of Rectifier for NPC Backto-Back Converter in HIL System
Yang Li, Liming Shi, and Yaohua Li
Chinese Academy of Sciences, China
DS3G4-5
Research of Temperature Rise on IGBT Module and
DC Busbar for a Single-Phase PWM Rectifier
Yifeng Zhu1,2), Qiongxuan Ge1), and Lu Zhao1)
1)
Chinese Academy of Sciences, China, 2)He'nan Polytechnic
University, China
DS3G4-6
A Passivity-Based Controller for a Unity-Power-Factor
Rectifier
1,2)
1)
2)
Zhi Zhang , Longyun Kang , and Haibo Xu
South China University of Technology, China, 2)Guangdong
EAST Power Limited Company, China
1)
DS3G4-7
Sinusoidal Input DCM Boost Rectifier with Lossless
Snubber Topology
H. Matsumoto, Y. Neba, K. Ishizaka, and R. Itoh
Fukuoka University, Japan
DS3G4-8
Output Characteristics of ARCP Matrix Converter at
Wide Output Command Range
Koji Hamamoto, Takashi Abe, and Tsuyoshi Higuchi
Nagasaki University, Japan
Hidetoshi Hayashi, Naoki Yamamura, and Muneaki Ishida
Mie University, Japan
DS3G4-10
Compensating Characteristics of Voltage Sag
Compensator Utilizing Single-Phase Matrix Converter
Kichiro Yamamoto, Keisuke Ikeda, and Kenichi Iimori
Kagoshima University, Japan
DS3G4-11
A Dimmable LED Driver with an Ambient Light Sensor
Based on a Constant Off-Time Control Technique
Yuan-Ta Hsieh1), Jian-Fu Wu1), Chiao-Li Fang1), Hann-Huei Tsai1),
Ying-Zong Juang1), and Bin-Da Liu2)
1)
National Chip Implementation Center, Taiwan, 2)National
Cheng Kung University, Taiwan
Session DS3G5
Linear and Maglev Machines
Date:
Tuesday, October 23
Time:15:00-16:15
Venue: Exhibition hall
Chairs: Toshimitsu Morizane
Osaka Institute of Technology, Japan
Wan-Tsun Tseng
National Yunlin University of Science and
Technology, Taiwan
DS3G5-1
Detent Force Analysis in Permanent Magnet Linear
Synchronous Motor Considering Longitudinal End
Effects
A. Liyi Li, B. Mingna Ma, and C. Qingquan Chen
Harbin Institute of Technology, China
DS3G5-2
Development of the Change Circuit of the Inverter of
Intermittent Stator PM-LSM
He Piao, Shinya Kohno, Kenji Suzuki, and Hideo Dohmeki
Tokyo City University, Japan
DS3G5-3
Analysis and Optimization of Air-Core Permanent
Magnet Linear Synchronous Motors with Overlapping
Concentrated Windings for Ultra-Precision
Applications
Liyi Li, Yongbin Tang, Mingna Ma, and Donghua Pan
Harbin Institute of Technology, China
DS3G5-4
Thrust of Permanent Magnet Linear Synchronous
Motor with Ferromagnetic Block on Pole Face
Manami Goto, Shunji Tahara, and Kokichi Ogawa
Oita University, Japan
ICEMS 2012
Tuesday, October 23
Session LS4A
DS3G5-5
Comparative Investigation of Single-Sided and
Double-Sided Permanent Magnet Linear Motor
PM Machines and Drives (6)
Qinfen Lu1), Chuanying Cheng1), Xinmin Zhang1), Liren Huang1),
Zilong Yang1), Dayong Ma2), Yunyue Ye1), and Youtong Fang1)
1)
Zhejiang University, China, 2)Shengzhou Institute of Chinese
Herbal Medicine, China
DS3G5-6
Secondary Research on the Influence to
Characteristics of Long Primary Double Sided Linear
Motor
Nan Wang, Yumei Du, Ruihua Zhang, and Liming shi
Chinese Academy of Sciences, China
DS3G5-7
The Dynamic Characteristics of LIM Using DiscShaped Secondary Side Converted into Linear Motion
Yasuhiro Kotani, Toshimitsu Morizane, Kosuke Tsujikawa,
Noriyuki Kimura, and Hideki Omori
Osaka Institute of Technology, Japan
DS3G5-9
Static Characteristics of a Double-Sided Linear
Switched Reluctance Motor with High-Temperature
Superconducting Excitation Winding
LS4A-317:10-17:30
Fundamental Characteristics of a Novel Self-Starting
Type Permanent Magnet Synchronous Motor
T. Higuchi, Y. Yokoi, T. Abe, and T. Egawa
Nagasaki University, Japan
LS4A-417:30-17:50
Experimental Tests of Surface Permanent Magnet
Magnetic Gear
T. Hirayama, K. Uwada, and S. Kawabata
Kagoshima University, Japan
Michinari Fukuoka, Kenji Nakamura, and Osamu Ichinokura
Tohoku University, Japan
DS3G5-10
Thrust and Thrust Ripple of Linear Reluctance Motor
Compared with PMLSM
Shohei Oshima, Shunji Tahara, and Kokichi Ogawa
Oita University, Japan
DS3G5-11
A Turnout without Movable Parts for Magnetically
Levitated Vehicles with Hybrid Magnets
T. Kakinoki, H. Yamaguchi, N. Yoshinaga, E. Mukai, and H. Nishi
Sojo University, Japan
DS3G5-12
Experiments and Simulations of Transportation by LIM
for Magnetically Levitated Steel Plates
Ryota Morisawa and Toshiko Nakagawa
Tokyo City University, Japan
DS3G5-13
Analysis of Linear Induction Motor Applied in LowSpeed Maglev Train
1)
M. Miyamasu and K. Akatsu
Shibaura Institute of Technology, Japan
zhaoyang Fu and Jinglin Liu
Northwestern Polytechnical University, China
Hyeon-Jeong Bak1), Jong-Suk Ro1), Jun Jin2), Kyung-Pyo Yi1),
Hyun-Kyo Jung1), and Tae-Kyung Chung2)
1)
Seoul National University, Korea, 2)Chung-Ang University, Korea
1)
LS4A-116:30-16:50
A Study of High Torque Surface-Mounted Permanent
Magnet Synchronous Motor by Maximum Utilization
of the Magnet Flux
LS4A-216:50-17:10
Research on the Design of Multi-Redundancy BLDC
Motor
DS3G5-8
Design and Analysis of an Electromagnetic Actuator
for a Magnetic Switch
1)
Date:
Tuesday, October 23
Time:16:30-17:50
Venue: Room A
Chairs: Keiichiro Kondo
Chiba University, Japan
Xiaoyuan Wang
Tianjin University, China
1)
Session LS4B
Induction Machines and Controls (2)
Date:
Tuesday, October 23
Time:16:30-17:50
Venue: Room B
Chairs: Keisuke Fujisaki
Toyota Technological Institute, Japan
Hew Wooi Ping
University of Malaya, Malaysia
LS4B-116:30-16:50
A New Simplified Sensorless Speed Control of
Induction Motor Using D-axis Voltage
M. Tsuji, G. M. C. Mangindaan, Y. Kunizaki, R. Hashimoto,
and S. Hamasaki
Nagasaki University, Japan
1)
Qinfen Lu , Yanxin Li , Xun Shen , Yunyue Ye , Youtong Fang ,
and Yunfeng He2)
1)
Zhejiang University, China, 2)CSR Zhuzhou Electric CO., LTD.,
China
LS4B-216:50-17:10
Non-Intrusive Method for Induction Motor Field
Efficiency Estimation Using On-Site Measurement and
Modified Equivalent Circuit
P. Phumiphak1) and C. Chat-uthai2)
1)
Mahanakorn University of Technology, Thailand, 2)King
Mongkut’s Institute of Technology Ladkrabang, Thailand
ICEMS 2012
LS4B-317:10-17:30
Special Winding to Reduce Space Flux Harmonics
Caused by Fractional-Slot
K. Tsujikawa, T. Tokumasu, M. Kakiuchi, D. Hiramatsu, M. Fujita,
T. Ueda, K. Ikeda, M. Ichimonji, and T. Otaka
Toshiba Corporation, Japan
LS4B-417:30-17:50
Study on the Implementation of the Phase-Domain
Model for Rotating Electrical Machines
L. Quéval and H. Ohsaki
The University of Tokyo, Japan
Session LS4C
Ultrasonic Motors
Date:
Tuesday, October 23
Time:16:30-17:50
Venue: Room C
Chair:
Manabu Aoyagi
Muroran Institute of Technology, Japan
LS4C-116:30-16:50
Examination of an Outer-Rotor-Type Multidegree-ofFreedom Spherical Ultrasonic Motor
Bo Lu and Manabu Aoyagi
Muroran Institute of Technology, Japan
LS4C-216:50-17:10
Contact Model of a Ring-Type Traveling Wave
Ultrasonic Motor
Chunrong Jiang1), Daniel S. Stutts2), Minqiang Hu1), and Long Jin1)
1)
Southeast University, China, 2)Missouri University of Science
and Technology, USA
LS4C-317:10-17:30
Development of Linear Ultrasonic Motor Using Beam
and Multilayer Piezoelectric Actuator
R. Nakayasu and M. Aoyagi
Muroran Institute of Technology, Japan
LS4C-417:30-17:50
Characteristic Analysis of an Traveling Wave Ultrasonic
Motor Using the Cylindrical Dynamic Contact Model
Jong-Suk Ro, Kyung-Pyo Yi, and Hyun-Kyo Jung
Seoul National University, Korea
Tuesday, October 23
Session LS4D
Power Apparatus
Date:
Tuesday, October 23
Time:16:30-17:50
Venue: Room D
Chairs: Kenichiro Yamashita
Salesian Polytechnic, Japan
Frederik De Belie
Ghent University, Belgium
LS4D-116:30-16:50
Multi-Receiver and Repeater Wireless Power Transfer
via Magnetic Resonance Coupling – Impedance
Matching and Power Division Utilizing Impedance
Inverter
K. E. Koh, T. C. Beh, T. Imura, and Y. Hori
The University of Tokyo, Japan
LS4D-216:50-17:10
Effects of System Parameters on the Steady-State
Characteristics of a DC Transmission System Including
Wind Turbine Generating Systems
Ken-ichiro Yamashita1) and Shoji Nishikata2)
1)
Salesian Polytechnic, Japan, 2)Tokyo Denki University, Japan
LS4D-317:10-17:30
Low-Speed Salient-Pole BLDC-Machine Control by
Using a Single Sensor
Frederik De Belie, Jeroen De Backer, Araz Darba,
and Jan Melkebeek
Ghent University, Belgium
LS4D-417:30-17:50
Real and Virtual Labs for Enhancing a SM Course
H. Djeghloud, A. Bentounsi, and M. Larakeb
Université Mentouri Constantine, Algeria
Session DS4G1
PM Machines and Drives (5)
Date:
Tuesday, October 23
Time:16:45-18:00
Venue: Exhibition hall
Chair:
Kan Akatsu
Shibaura Institute of Technology, Japan
DS4G1-1
Research on an Energy Feedback Power Dynamometer
Based on Improved Vector Control
Nan Zhang and Wei Zhang
Zhejiang University, China
DS4G1-2
Direct Torque and Adaptive Flux Control of Novel
Transverse-Flux Permanent Magnet Motor with
Brushless DC Drive
Xiaotao Tu1), Yinyin Dai1,2), and Chenglin Gu1)
1)
Huazhong University of Science and Technology, China,
2)
Huaqiao University, China
ICEMS 2012
DS4G1-3
A Proposed Control Strategy of PMSM for Deep FieldWeakening and Square-Wave Mode
Yongxing Wang, Xuhui Wen, and Feng Zhao
Chinese Academy of Sciences, China
DS4G1-4
Output Power Maximization of IPMSM Using
Overmodulation Region of Direct Torque Control
System
Y. Maeda, Y. Inoue, S. Morimoto, and M. Sanada
Osaka Prefecture University, Japan
DS4G1-5
Ultra-High-Speed PMSM Sensorless Drive Using
Direct Torque Control
Junki Yoshimoto, Yukinori Inoue, Shigeo Morimoto,
and Masayuki Sanada
Osaka Prefecture University, Japan
DS4G1-6
Flux-Weakening Control of PMSM Based on Single
Current Regulator and Variable Q-Axis Voltage
Taiyuan Hu, Fei Lin, Kezhen Lin, Xiaocun Fang,
and Zhongping Yang
School of Electrical Engineering Beijing Jiao tong University,
China
DS4G1-7
A Novel Flux-Weakening Strategy Study to Improve
Performance of IPMSM Drives
Wang Aimeng, Jia Xingwang, and Wang Yi
North China Electric Power University, China
DS4G1-8
Direct Torque Control Combined with MTPA Concept
for Open Winding IPMSM
Jinyun Yu, Dan Sun, Bin Lin, and Shitao Sun
Zhejiang University, China
Session DS4G2
Switched Reluctance Machines and Drives
Date:
Tuesday, October 23
Time:16:45-18:00
Venue: Exhibition hall
Chairs: Akira Chiba
Tokyo Institute of Technology, Japan
Chuang Liu
Nanjing University of Aeronautics and
Astronautics, China
DS4G2-1
Torque Improvement of Three-Phases Full Bridge
Converter Based Switched Reluctance Motor with DC
Assisted Winding
K. Tungpimolrut1), S. Kachapornkul1), P. Jitkreeyarn1), P. Somsiri1),
N. Chayopitak1), and C. Akira2)
1)
National Electronics and Computer Technology Center,
Thailand, 2)Tokyo Institute of Technology, Japan
Tuesday, October 23
DS4G2-2
Design of a 1.5 kW High Speed Switched Reluctance
Motor for Electric Supercharger with Optimal
Performance Assessment
Nattapon Chayopitak, Ruchao Pupadubsin,
Santipong Karukanan, Prasit Champa, Pakasit Somsiri,
and Yutthasak Thinphowong
National Electronics and Computer Technology Center, Thailand
DS4G2-3
Torque Ripple Comparison of Short-Pitched and FullyPitched Winding Switched Reluctance Machine
Jianbo Sun, Shuanghong Wang, Zhe Kuang, and Huangyuan Wu
Huazhong University of Science and Technology, China
DS4G2-4
Calculation and Measurement of Eigenmodes for a
Canned Switched Reluctance Machine
Christian Laudensack, Thomas Dentler, Qiang Yu,
and Dieter Gerling
The Universität der Bundeswehr München, Germany
DS4G2-5
Stator Structure for Noise Reduction of Switched
Reluctance Motor
Akihiro Sakuma1), Masahiro Kadowaki1), Hidetsugu Ukigai1),
Ichiro Miki1), Toshiyuki Okamoto2), and Toshiaki Segawa2)
1)
Meiji University, Japan, 2)JATCO Ltd, Japan, Japan
DS4G2-6
Rotor Position Estimation Method in High Speed
Region for 3-Phase SRM Used in EV
Naoya Wada, Naohide Momma, and Ichiro Miki
Meiji University, Japan
DS4G2-7
Radial Suspension Control of Magnetic Bearing
Switched Reluctance Motor Based on the ITAE
Optimization
Jitao Zhang1), Xilian Wang1), and Feng Guo2)
Beijing Jiaotong University, China, 2)The Ohio State University,
USA
1)
DS4G2-8
Comparison of Winding Arrangements of Three Phase
Switched Reluctance Motor under Unipolar Operation
Ruchao Pupadubsin, Nattapon Chayopitak,
Santipong Karukanan, Prasit Champa, Pakasit Somsiri,
and Kanokvate Tungpimolrut
National Electronics and Computer Technology Center, Thailand
DS4G2-9
Low Cost High Speed Switched Reluctance Motor
Drive for Supercharger Applications
Seubsuang Kachapornkul, Pakasit Somsiri, Ruchao Pupadubsin,
Niyom Nulek, and Nattapon Chayopitak
National Electronics and Computer Technology Center, Thailand
DS4G2-10
Design of a Switched Reluctance Generator
Competitive with the IPM Generator in Hybrid
Electrical Vehicles
Katsuhiko Urase, Kyohei Kiyota, Hiroya Sugimoto,
and Akira Chiba
Tokyo Institute of Technology, Japan
ICEMS 2012
DS4G2-11
Design of 2-Phase 4/2 SRM for Torque Ripple
Reduction
Pham Trung Hieu, Dong-Hee Lee, and Jin-Woo Ahn
Kyungsung University, Korea
Session DS4G3
Synchronous Machines and Others
Date:
Tuesday, October 23
Time:16:45-18:00
Venue: Exhibition hall
Chair:
Shu Yamamoto
Polytechnic University, Japan
DS4G3-1
New Reliable Sensorless Startup Strategy of Brushless
DC Motor for Large Inertia System
Ming Lu1,2), Lifu Yu2), and Yaohua Li1)
1)
Chinese Academy of Sciences, China, 2)Beijing Institute of
Control Engineering, China
DS4G3-2
Polyphase System of the Unidirectional Electrified
Transverse Magnetic Flux BLDC Motor and the
Operating Characteristic
Yasuhiro Komatsu, Hirotaka Itou, Syed Abdul Kadir Zawawi,
and Nur Alia Athirah Binti Hj Mohtadzar
Ritsumeikan University, Japan
DS4G3-3
Winding Turn-to-Turn Faults Detection of Five-Phase
Fault-Tolerant Permanent-Magnet Machine Based on
Parametric Model
Wei Tang, Guohai Liu, and Jinghua Ji
Jiangsu University, China
DS4G3-4
Study on Generation of Harmonic Voltage Using
Synchronous Machine with d-axis and q-axis
Harmonic Field Windings
E. Mukai1), T. Kakinoki1), H. Yamaguchi1), Y. Kimura1),
and S. Fukai2)
1)
Sojo University, Japan, 2)Saga University, Japan
DS4G3-5
Improvement for EMF Wave Form Used Fractional
Slot Winding of Permanent Magnet Type Synchronous
Machine
Yasuhiro Miyamoto1), Daisuke Morishita2), Tsuyoshi Higuchi3),
and Takashi Abe3)
1)
Yaskawa Electric Co. Ltd., Japan, 2)Yaskawa Motor Co. Ltd.,
Japan, 3)Nagasaki University, Japan
DS4G3-6
Analytical Study of Linear Transformer - Linear
Motor Apparatus for Non-Contact Power Supplied
Transportation
N. Fujii and T. Eto
Kyushu University, Japan
Tuesday, October 23
DS4G3-7
Eddy Current Loss Analysis of Stator Core Through
Bolt of Hydrogenerator
M. Fujita, T. Ueda, T. Tokumasu, H. Ishizuka, M. Okubo,
and K. Mukai
Toshiba Corporation, Japan
DS4G3-8
A New Method Based on PIR Controller to Reject
Torque and Current Ripple under Fluctuating DC
Voltage for High-Speed Train Traction Drives
Wei Shi, Fei Lin, and Zhongping Yang
Beijing Jiaotong University, China
DS4G3-9
A PWM Modulation Method for Five-Leg Inverter
Yang Mei1), Lipeng Wang1), Lina Wang2), and Jia Liu2)
1)
North China University of Technology, China, 2)Beihang
University, China
Session DS4G4
Power Converters (3)
Date:
Tuesday, October 23
Time:16:45-18:00
Venue: Exhibition hall
Chair: Naomitsu Urasaki
University of the Ryukyus, Japan
DS4G4-1
Proposal of Resonant Converter Employing Zero
Current Switch with Saturable Inductor
Keisuke Kuwabara, Keiju Matsui, Takanori Asaba,
and Masaru Hasegawa
Chubu University, Japan
DS4G4-2
An Electric Power Conversion System Composed
of Two Parallel-Connected Converters Providing
Different Output Currents
Hiromi Inaba, Keiji Kishine, and Yasufumi Igura
The University of Shiga Prefecture, Japan
DS4G4-3
Selective Harmonic Eliminated and Synchronous
Optimal Pulse Width Modulation for a Single-Phase
PWM Rectifier in Traction Applications
Zhao Lu, Li Yaohua, Ge Qiongxuan, and Ren Jinqi
Chinese Academy of Sciences, China
DS4G4-4
Soft Switching DC-DC Boost Converter with Coupling
Inductor for Continuous Current Mode Operation
Kenta Isozumi, Noriyuki Kimura, Toshimitsu Morizane,
and Hideki Omori
Osaka Institute of Technology, Japan
DS4G4-5
Design of Dual Output LLC Resonant Converter for a
High-Power LED Lamp
Han-sol Chang1), Byung-Hun Lee1), Hyung-Nam Park2),
Jae-Du La3), and Young-Seok Kim1)
1)
Inha University, Korea, 2)ICD Co. LTD., Korea, 3)Inha Technical
College, Korea
ICEMS 2012
Tuesday, October 23
DS4G4-6
Design of High Power Factor Single-Stage Flyback
Converter Eliminating Electrolytic Capacitors and
Reducing 120[Hz] Ripple on the Output Node in the
LED Lightings
1)
1)
1)
2)
Yong-Sung Jeon , Dal-Lae Jin , Joon-Min Lee , Jae-Du La ,
and Young-Seok Kim1)
1)
Inha University, Korea, 2)Inha Technical College, Korea
DS4G4-7
A Novel Solution Using Two-Port Network Models for
Transient Analysis of Full-Bridge DC-DC Converter in
Solid State Transformer
Minglei Zhu1), Rongxiang Zhao1), Hao Zhang2), and Yuying Zhou1)
1)
Zhejiang University, China, 2)Shanghai Entry-Exit Inspection and
Quarantine Bureau, China
DS4G4-8
Digitally Controlled LLC Resonant Converter Using
Modified FIR Filter
Koji Murata and Fujio Kurokawa
Nagasaki University, Japan
DS4G4-9
The Study of Evaporative Cooling Technology in
Electric and Electronic Equipment
Zhenguo Li, Lin Ruan, Feihui Liu, and Bin Xiong
Chinese Academy of Sciences, China
DS4G4-10
Digital Controlled Fast Average Current Mode DC-DC
Converter Using VCO and FIR Filter
F. Kurokawa and K. Kajiwara
Nagasaki University, Japan
DS4G4-11
A Novel Digital Variable Integral Gain Control for DCDC Converter
Fujio Kurokawa and Shun Higuchi
Nagasaki University, Japan
DS4G4-12
Active Clamping Circuit with Status Feedback for HVIGBT
Ting Lu, Zhengming Zhao, Shiqi Ji, Hualong Yu,
and Liqiang Yuan
Tsinghua University, China
DS4G4-13
Parameter Design of Three-Level Converter Based on
Series Connected HV-IGBTs
Ting Lu, Zhengming Zhao, Hualong Yu, Shiqi Ji, Liqiang Yuan,
and Fanbo He
Tsinghua University, China
DS4G4-14
Evaluation of THD and Switching Loss for a New
Single-Phase 7-Level Inverter
Hideki Ayano and Yoshihiro Matsui
Tokyo National College of Technology, Japan
Session DS4G5
Renewable Energy (2)
Date:
Tuesday, October 23
Time:16:45-18:00
Venue: Exhibition hall
Chairs: Takanori Isobe
Tokyo Institute of Technology, Japan
Mi-Hye Jang
Yonsei University, Korea
DS4G5-1
Design of MPPT Controller for Small Scale Wind
Power System with PMSG
G. Chun, P. Ganeshkumar, A. Ahmed, and J. Park
Soongsil University, Korea
DS4G5-2
Transient Stability Analysis of HVAC or HVDC
Transmission System Based Offshore Wind Farm
Naoya Inaba1), Rion Takahashi1), Junji Tamura1),
Mamoru Kimura2), Akiyoshi Komura2), and Kenji Takeda2)
1)
Kitami Institute of Technology, Japan, 2)Hitachi, Ltd., Japan.
DS4G5-3
A Simple and Reliable Rectifier for PMSG Wind
Turbines by Using Series Reactive Compensator
Named MERS
Takanori Isobe, Takayuki Kawaguchi, Tsukasa Sakazaki,
and Ryuichi Shimada
Tokyo Institute of Technology, Japan
DS4G5-4
Power Losses in Two- and Three-Level Three Phase
Photovoltaic Inverters Equipped with IGBTs
Zhiping Chen, Liqiang Yuan, Zhengming Zhao, and Xiaoying Sun
Tsinghua University, China
DS4G5-5
Development of Photovoltaic Cell Emulator Using the
Small Scale Wind Turbine
Masashi Samizo, Naoki Yamamura, and Muneaki Ishida
Mie University, Japan
DS4G5-6
Transient Stability Assessment of Synchronous
Generator in Power System with High-Penetration
Photovoltaics
M. Yagami1), T. Hasegawa1), and J. Tamura2)
1)
Hokkaido Institute of Technology, Japan, 2)Kitami Institute of
Technology, Japan
DS4G5-7
Development of a Plant Configuration Photoreceptor
Optimized for the Objective of Maximizing LightReceived Quantity
Eiichi Tanaka1), Shin’ya Obara1), Shingo Nakai1), Daisuke Konno1),
and Masaharu Munetomo2)
1)
Kitami Institute of Technology, Japan, 2)Hokkaido University,
Japan
ICEMS 2012
DS4G5-8
Battery Controller Design of Stand-Alone Photovoltaic
System Using IncCond Method
Beop-Jun Jeon1), Ki-Hyun Kim1), Kwon Lee1), Ji-Hye Im2),
Geum-Bae Cho1), and Youn-Ok Choi1)
1)
Chosun University, Korea, 2)Kumho HT, Inc, Korea
DS4G5-9
Study of a Light-Received System with Configuration
of a Plant Shoot
Shingo Nakai1), Shinya Obara1), Eiichi Tanaka1), Daisuke Konno1),
and Masaharu Munetomo2)
1)
Kitami Institute of Technology, Japan, 2)Hokkaido University,
Japan
DS4G5-10
Single-Phase Grid-Connected Photovoltaic System
with Active Power Filter Functionality
A. Chaitanakulwat1), V. Kinnares1), and N. Thungsuk2)
1)
King Mongkut’s Institute of Technology Ladkrabang, Thailand,
2)
Dhonburi Rajabhat University, Thailand
Tuesday, October 23
ICEMS 2012
Session LS5A
PM Machines and Drives (7)
Wednesday, October 24
LS5B-210:20-10:40
Energy Efficient Control Technique for Switched
Reluctance Motor Drives
Date:
Wednesday, October 24
Time:10:00-11:40
Venue: Room A
Chairs: Masatsugu Takemoto
Hokkaido University, Japan
Zhuoran Zhang
Nanjing University of Aeronautics and
Astronautics, China
Maged N. F. Nashed
Electronics Research Institute, Egypt
LS5A-110:00-10:20
Experiment and Analysis of d- and q-Axes Inductances
of Interior Permanent Magnet Synchronous Motor
Used in Electric Vehicles
LS5B-411:00-11:20
Performance of Segment Type Switched Reluctance
Motor Using Grain-Oriented
Manfeng Dou1) and Rong Fu1,2)
1)
Northwestern Polytechnical University, China, 2)Weinan
Teachers University, China
LS5A-210:20-10:40
Study the Effects of Slotted Rotor on q-axis Direction
on Permanent Magnet Synchronous Motor
Xiaoyuan Wang, Pingxin Wang, Jiahong Yan, and Gengji Wang
Tianjin University, China
LS5A-310:40-11:00
Parameter Study for the Miniaturization of a Rotary
Blood Pump Drive System
André Pohlmann and Kay Hameyer
RWTH Aachen University, Germany
LS5B-310:40-11:00
A Characteristic Experiment of 4-Phase Segment Type
Switched Reluctance Motor
Daiki Yamaguchi, Tsuyoshi Higuchi, Takashi Abe,
and Yuichi Yokoi
Nagasaki University, Japan
Osamu Kaneki1), Tsuyoshi Higuchi1), Yuichi Yokoi1), Takashi Abe1),
Yasuhiro Miyamoto2), and Motomichi Ohto2)
1)
Nagasaki University, Japan, 2)Yaskawa Electric Corporation,
Japan
LS5B-511:20-11:40
Simple Unipolar Excitations for SR Motors Considering
Fundamental Component of Self-Inductance
Distribution
N. Nakao and K. Akatsu
Shibaura Institute of Technology, Japan
Session LS5C
Wind Turbine Generators
LS5A-411:00-11:20
The Parameters Selection Methodology for Permanent
Magnet Synchronous Machine under Uncontrolled
Generator Operation Mode
Yao Yi, Fan Tao, and Wang Yongxing
Chinese Academy of Sciences, China
Date:
Wednesday, October 24
Time:10:00-11:40
Venue: Room C
Chairs: Fujio Tatsuta
Tokyo Denki University, Japan
Zhengming Zhao
Tsinghua University, China
LS5A-511:20-11:40
Practical Design Considerations for Large PM
Machines
LS5C-110:00-10:20
Novel Control Design of Variable Speed PM Wind
Generator Considering Grid Code Requirement
Ronghai Qu and Xiaolong Zhang
Huazhong University of Science and Technology, China
Session LS5B
Switched Reluctance Machines and Drives
Date:
Wednesday, October 24
Time:10:00-11:40
Venue: Room B
Chair: Tsuyoshi Higuchi
Nagasaki University, Japan
LS5B-110:00-10:20
Controller Design of a Canned Switched Reluctance
Machine
Q. Yu, C. Laudensack and D. Gerling
The Universität der Bundeswehr München, Germany
Marwan Rosyadi1), S. M. Muyeen2), Rion Takahashi1),
and Junji Tamura1)
1)
Kitami Institute of Technology, Japan, 2)The Petroleum Institute,
UAE
LS5C-210:20-10:40
Improvement of Dynamic Performances of Tip Speed
Ratios of Series Connected Wind Turbine Generators
Fujio Tatsuta and Shoji Nishikata
Tokyo Denki University, Japan
LS5C-310:40-11:00
Studies on Field Current Control Method for Constant
Tip Speed Ratios of Series Connected Wind Turbine
Generators in a Wind Farm
A. Takemura, F. Tatsuta, H. Yokoyama, and S. Nishikata
Tokyo Denki University, Japan
LS5C-411:00-11:20
Use of Independent Pitch Controllers to Reduce Load
Fluctuations Caused by Blade Icing
Zuoxia Xing, Jia Cui, Yanjun Jing, and Hongli Sun
Shenyang University of Technology, China
ICEMS 2012
LS5C-511:20-11:40
A Novel Idle Cutting-in Control Strategy Based on PLL
for DFIG Wind Turbine
Qingwei Yuan, Zhiyong Zeng, Chong Zhu, Huan Yang,
and Rongxiang Zhao
Zhejiang University, China
Session LS5D
Power Converters (2)
Date:
Wednesday, October 24
Time:10:00-11:40
Venue: Room D
Chair:
Naoki Yamamura
Mie University, Japan
LS5D-110:00-10:20
Input LC Filter Design of Bi-Directional AC/DC
Converter
Yuya Fujishima, Wataru Kitagawa, and Takaharu Takeshita
Nagoya Institute of Technology, Japan
LS5D-210:20-10:40
Harmonic and Reactive Currents Sharing by MultiFunctional Grid-Connected Inverters in a Micro-Grid
Zheng Zeng, Huan Yang, Chong Cheng, Zhiyong Zeng,
and Rongxiang Zhao
Zhejiang University, China
LS5D-310:40-11:00
Design of a Complex-Valued Sliding Surface
Controller with Applications to Constant-Voltage
Constant-Frequency Inverters
En-Chih Chang, Chien-Hsuan Chang, and Hung-Liang Cheng
I-Shou University, Taiwan
LS5D-411:00-11:20
A Digital Implementation of Novel Single Phase ACAC Converter with Power Factor Control
Suwat Kitcharoenwat, Mongkol Konghirun,
and Anawach Sangswang
King Mongkut’s University of Technology Thonburi, Thailand
LS5D-511:20-11:40
A Controlled Current AC-AC Converter for Circuit
Breaker Testing
Suwat Kitcharoenwat, Mongkol Konghirun,
and Anawach Sangswang
King Mongkut’s University of Technology Thonburi, Thailand
Wednesday, October 24