PRODUCT BROCHURE
RMD Australia
Rapid Bar Tie
PRODUCT BROCHURE
Rapid Bar Tie Cost-effective tie
Rapid Bar Tie Wing Nut
Product Overview
A comprehensive range of accessories and load capacities make the RMD
Rapid Bar Tie exceptionally versatile and cost-effective.
Faster
Supplied in standard lengths or cut to size to suit your
requirements
Developed as the most versatile and cost effective tie for all
formwork applications
Easier
Available in two stock diameters - 15mm and 20mm
A wide range of accessories, providing unrivalled scope for
developing solutions to complex or unusual applications
Other diameter Rapid Bar Ties are available on special order
Safer
Rapid Bar Tie have self cleaning threads
Available in two safe working loads of 102kN and 165kN.
1
PRODUCT BROCHURE
Rapid Bar Tie Cost-effective tie
Features & Benefits
Vast inventory of Rapid Bar Tie and accessories, combined with our extensive
worldwide distribution network means we can fulfil the most urgent requirements
from stock.
Secure fixings
Contributing to safe and reliable formwork solutions.
Self cleaning
Speeding up assembly and disassembly and reducing costs.
Quality accessories
Helping you achieve the quality of finish you require.
2
PRODUCT BROCHURE
Rapid Bar Tie Cost-effective tie
Taranga Vineyard, McLaren Vale, SA
In Detail
Secure fixings
Quality accessories
The heavy duty flat plate is
designed to distribute the
load of the Rapid Bar Tie into
the supporting member.
Recoverable plastic cones
used at each end of the
conduit tube set the tube
10mm short of the concrete
wall surface. The cones are
easily removed for reuse.
The clean impression left by
the cone allows for an
aesthetically pleasing cement
plug.
Self cleaning
Standard product
The coarse pitch and
intermittent thread form
means the wing nut runs
down the bar quickly, self
cleaning, removing dirt in the
process – speeding up
assembly and reducing
costs.
Our vast inventory of Rapid
Bar Tie and accessories,
combined with our extensive
worldwide distribution
network means we can fulfil
the most urgent requirements
from stock.
3
PRODUCT BROCHURE
Rapid Bar Tie Cost-effective tie
Project References
Birmingham New Street
Station
Europe
Rail
4
PRODUCT BROCHURE
Rapid Bar Tie Cost-effective tie
Components
Rapid Bar Tie 15mm and
20mm
Standard Waler Plates
A high tensile steel hot rolled bar
incorporating
a
continuous,
intermittent coarse pitch thread.
WLL = 102kN for 15mm dia. and
WLL = 165kN for 20mm dia.
Code
Description
Weight
BTA20300 Rapid Bar Tie 15mm 0.3m
0.43kg
BTA20600 Rapid Bar Tie 15mm 0.6m
0.86kg
BTA20900 Rapid Bar Tie 15mm 0.9m
1.29kg
BTA21000 Rapid Bar Tie 15mm 1m
1.43kg
BTA21200 Rapid Bar Tie 15mm 1.2m
1.72kg
BTA21500 Rapid Bar Tie 15mm 1.5m
2.15kg
BTX21800 Rapid Bar Tie 15mm 1.8m
2.57kg
BTX22100 Rapid Bar Tie 15mm 2.1m
3.00kg
BTX22400 Rapid Bar Tie 15mm 2.4m
3.43kg
BTX22700 Rapid Bar Tie 15mm 2.7m
3.86kg
BTA23000 Rapid Bar Tie 15mm 3.0m
4.29kg
BTA23300 Rapid Bar Tie 15mm 3.3m
4.72kg
BTX23600 Rapid Bar Tie 15mm 3.6m
5.15kg
BTX23900 Rapid Bar Tie 15mm 3.9m
5.58kg
BTX24200 Rapid Bar Tie 15mm 4.2m
6.01kg
BTX24500 Rapid Bar Tie 15mm 4.5m
6.44kg
BTX24800 Rapid Bar Tie 15mm 4.8m
6.86kg
BTX25100 Rapid Bar Tie 15mm 5.1m
7.29kg
BTX25400 Rapid Bar Tie 15mm 5.4m
7.72kg
BTX25700 Rapid Bar Tie 15mm 5.7m
8.15kg
BTX25800 Rapid Bar Tie 15mm 5.8m
8.29kg
BTX26000 Rapid Bar Tie 15mm 6.0m
8.58kg
BTX25801 Rapid Bar Tie 20mm 5.8m
14.5kg
BTX40100 Rapid Bar Tie 20mm/m 2.5m
Code
Description
Weight
BTX10021 Waler Plate Standard - Orange (AWL =
80kN)
1.35kg
BTX10014 Waler Plate Light 55kN - Plated (AWL =
55kN)
1.13kg
2.5kg
5
PRODUCT BROCHURE
Rapid Bar Tie Cost-effective tie
Components
Rapid Bar Tie Heavy Duty
Flat Plate
Rapid Bar Tie Nuts
The Heavy Duty Flat Plate
distributes the load of the Rapid
Bar Tie into the supporting
member.
The hexagonal nuts and coupler
can be used with Rapid Bar Tie
with no reduction of working load
to the bar.
Code
Description
Weight
Code
Description
Weight
BTA11012 Flat Bracket 130 x130 x12mm
1.51kg
BTA10003 Bar Tie 15mm Half Nut
0.09kg
BTA11010 Flat Bracket 130 x 130 x 10mm
1.31kg
BTX10004 Bar Tie 15mm Full Nut
0.21kg
BTA11008 Flat Bracket 130 x 100 x 8mm
0.79kg
BTX10011 Bar Tie 15mm Water Bar Coupler
0.54kg
BTA10020 Bar Tie 20mm Half Nut
0.18kg
BTA10005 Bar Tie 20mm Full Nut
0.40kg
Rapid Bar Tie Wing Nut
Rapid Bar Tie Cones
The hexagon head facilitates the
use of a spanner and the wings
allow it to be tapped with a
hammer or levered with a piece
of reinforcing bar.
Recoverable plastic cones are
used at each end of the plastic
conduit tubes.They set the
conduit end 10mm short of the
face of the concrete wall.
Code
Description
Weight
BTX10001 Bar Tie Wing Nut 15mm
BTA11020 Bar Tie Wing Nut 20mm
Code
Description
Weight
0.34kg
BTA10010 Plastic Cone 15mm Large
0.01kg
0.55kg
BTA10018 Plastic Cone 15mm Standard
0.01kg
BTA10008 Plastic Cone 20mm
0.01kg
6
PRODUCT BROCHURE
Rapid Bar Tie Cost-effective tie
Components
Rapid Bar Tie PVC Conduit
Tube
Rapid Bar Tie Coupler
The rigid PVC conduit tube is cut
to length on site and is used to
sheath the tie bar from the wet
concrete.
Code
Description
Rapid Bar Tie Coupler was
designed to transfer the full
working load in the bar.
Weight
Code
Description
Weight
MNA40150 Bar Tie PVC Conduit 15mm x 4m
0.74kg
BTA11115 Bar Tie Coupler 15mm
0.38kg
MNA40155 Bar Tie PVC Conduit 20mm x 4m
0.80kg
BTA11120 Bar Tie Coupler 20mm
0.75kg
Rapid Bar Tie water Bar
Connector
AWL = 110kN
Code
Description
BTX10011 Rapid Bar Tie water Bar Connector
Weight
0.54kg
7
PRODUCT BROCHURE
Rapid Bar Tie Cost-effective tie
Services
Our service sets RMD Australia apart...
With over 60 years of experience in the construction industry RMD Australia
understand the many and varied challenges that our customers face, whatever
the size of your project. Whilst our product range provides us with the capability
of supporting your project, it is our people that will make the difference.
Sales Support
Technical Expertise
The Sales Team support you throughout the project, they have
the knowledge to advise effective solutions based on RMD's
safe and productive products to reduce costs.
Every project, large or small, requires a unique design. Our
highly skilled team of Engineers will firstly gain a thorough
understanding of your specific requirements, and then provide
a solution designed to more than meet them in terms of speed
and accuracy. With a view to cost effectiveness.
Engineered Drawings
Engineering is based in each Region and at RMD's Head
Office. They provide detailed drawings that clearly show the
most efficient and safest way that the project should be
undertaken.
Customer Service
Safety
RMD Australia prides itself on the inherent safety of our
product range and the solutions that we design. Safety is a
major criteria for all of our personnel including our dedicated
Sales Team.
RMD provide a wide range of customer services to suit your
special requirements, from training to the support items that
you may require.
8
PRODUCT BROCHURE
Rapid Bar Tie Cost-effective tie
Contacts
RMD AUSTRALIA
HEAD OFFICE
ADELAIDE
BRISBANE
PO Box 169, 66 Bennet Avenue,
Melrose Park, SA 5039
Tel: +61 (08) 8179 8200
Fax: +61 (08) 8179 8201
Email: rmd.australia@rmdformwork.com
PO Box 169, 66 Bennet Avenue,
Melrose Park, SA 5039
Tel: +61 (08) 8179 8240
Fax: +61 (08) 8179 8241
Email: rmd.adelaide@rmdformwork.com
163 Crockford Street, Northgate,
QLD 4013 (PO Box 55, Nundah,
QLD 4012)
Tel: +61 (07) 3634 2700
Fax: +61 (07) 3266 1054
Email: rmd.brisbane@rmdformwork.com
CAIRNS
DARWIN
HOBART
PO Box 399, 78 - 80 Ishmael Road,
Earlville, QLD 4870
Tel: +61 (07) 4054 5149
Fax: +61 (07) 4054 5198
Email: rmd.cairns@rmdformwork.com
3/32 Bishop Street, Stuart Park, NT
0820 (PO Box 37639 Winnellie, NT
0821)
Tel: +61 (08) 8941 6777
Fax: +61 (08) 8942 2577
Email: rmd.darwin@rmdformwork.com
5 Lampton Avenue, Derwent Park,
TAS 7009 (PO Box 246, Moonah,
TAS 7009)
Tel: +61 (03) 6272 2566 or +61 (03) 6272 5073
Fax: +61 (03) 6272 2611
Email: rmd.hobart@rmdformwork.com
LAUNCESTON
MACKAY
MAROOCHYDORE
9 Churchill Park Drive, Ivernay, TAS
7248 (PO Box 739, Launceston, TAS
7250)
Tel: +61 (03) 6331 3751 or +61 (03) 6334 2566
Fax: +61 (03) 6331 9751
Email: rmd.launceston@rmdformwork.com
Block 8D, Graeme Heggie Street,
Mackay, QLD 4740
Tel: +61 (07) 4955 1228 / +61 (07)4955 1844
Fax: +61 (07) 4955 3052
Email: rmd.mackay@rmdformwork.com
32 Page Street, Kunda, QLD 4556
(PO Box 584, Maroochydore, QLD
4558)
Tel: +61 (07) 5445 3244
Fax: +61 (07) 5445 4822
Email: rmd.maroochydore@rmdformwork.com
MELBOURNE
NAVAL BASE
NEWCASTLE
PO Box 3224, Unit 5/80 Camp Road,
Broadmeadows, VIC 3047
Tel: +61 (03) 8301 7200
Fax: +61 (03) 9359 9761
Email: rmd.melbourne@rmdformwork.com
43 Dooley Street, Naval Base, WA
6165 (PO Box 386, Kwinana, WA
6167)
Tel: +61 (08) 9410 2777
Fax: +61 (08) 9410 2779
Email: rmd.navalbase@rmdformwork.com
3 Riverside Drive, Mayfield West,
NSW 2304 (PO Box 53, Wickham,
NSW 2293)
Tel: +61 (02) 4967 5888
Fax: +61 (02) 4967 5788
Email: rmd.newcastle@rmdformwork.com
PERTH
ROCKHAMPTON
SYDNEY
6 Energy Street, Malaga, WA 6090
(PO Box 3203, Malaga DC, WA
6945)
Tel: +61 (08) 9207 9200
Fax: +61 (08) 9207 9201
Email: rmd.perth@rmdformwork.com
Corner McLaughlin and Wade
Street, North Rockhampton, QLD
4702 (PO Box 5922, Central
Queensland MC, QLD 4701)
Tel: +61 (07) 4936 3955
Fax: +61 (07) 4936 3966
Email: rmd.rockhampton@rmdformwork.com
25-39 Chadderton Street, Canley
Vale, NSW 2166 (PO Box 3007,
Lansvale, NSW 2166)
Tel: +61 (02) 8717 3700
Fax: +61 (02) 9728 6399
Email: rmd.sydney@rmdformwork.com
TOWNSVILLE
PO Box 7788, 11 Whitehouse Street,
Garbutt, QLD 4814
Tel: +61 (07) 4779 0544
Fax: +61 (07) 4725 1364
Email: rmd.townsville@rmdformwork.com
www.rmdkwikform.com
Our policy is one of continuous improvement and we reserve the right to change, alter or
modify any detail, design, capacity, weight, dimension or code without prior notice being
given.
The arrangements of equipment shown in photographs may have been assembled by
others and therefore not reflect current best working practices or legislation requirements.
An Interserve Company