MicroPulse LT Product Specification Built on MicroPulse technology, the LT is a high performance ultrasonic inspection system designed to be compatible with the existing MicroPulse family. The LT is a complete package with small footprint, utilising PoE technology. Ideally suited for machine mounted inspections. Overview Features It connects to a PC running the test application via Ethernet. It takes power from the Ethernet or from a separate 48V power source. It is available as a 2-channel, a 4-channel or an 8-channel version. It is suitable for use in pulse-echo, TOFD and immersion inspections where because of its small size it may be gantry mounted. • Small / rugged / lightweight • Inputs for 2 axes of encoders for true pulse on position • Outputs digitised waveform and / or peak-detected data • Up to 4 hardware gates Software Platforms • Extended dynamic range modes Available with Peak NDT’s LTScan software with pulseecho, TOFD and corrosion mapping. Also compatible with EDF Energy MIPS/GUIDE and Winspect/InspectionWare from UTEX. Open data format and long-established MicroPulse command language mean that the users have the option to write their own applications. • PoE Applications • Immersion tanks • Gantry systems • In-situ monitoring • Small scale inspections in hard to access areas Further Information Visit www.peakndt.com Peak NDT Ltd, Unit 1, Enterprise Way, Jubilee Business Park, Derby, DE21 4BB Tel: +44(0)1332 738752 Fax: +44(0)1332 73887 E-mail: sales@peakndt.com www.peakndt.co.uk NOTE: Peak NDT Ltd. reserves the right to change these specifications without notice. Specification Parameter Range Step Size Pulser Pulser Type Pulser Voltage Pulser Rise Time Pulser Width Output Impedance Pulser Damping Pulse Repetition Frequency Parallel Firing Negative square wave 25 to 200 Volts <5ns 20nsec to 502nsec <10Ω 50Ω to 660Ω in 8 steps 1Hz to 20kHz No 25 Volt 2nsec 1Hz Receiver Gain -6 to 70dB NB Max DAC plus main gain is 110db 2nV/√Hz typical Better than 0.25 dB 660Ω 0.75MHz to 25MHz (-3dB) 0.75MHz to 12MHz (-3dB) Bandpass 2.5MHz to 18MHz (-3dB) Bandpass 3MHz to 22MHz (-3dB) Bandpass 3MHz to 25MHz (-3dB) Bandpass 0.5MHz Bandpass Filter 1MHz Bandpass Filter 2MHz Bandpass Filter 4MHz Bandpass Filter 5MHz Bandpass Filter 10MHz Bandpass Filter 5MHz 2nd order TOFD Bandpass Filter 10MHz 2nd order TOFD Bandpass Filter No >60dB between channels at 2MHz 0.25db 0 to 70dB NB Max DAC plus main gain is 110dB Transmit pulse or material interface echo 256 utilising up to 32kbytes 40dB/µsec 1.5625MHz to 25MHz 0.25dB 12 bits 16 bits 25, 50 and 100MHz (and 200MHz HRES) 1 per 4 channel block 64k sample points from trigger or I/F echo Up 32K sample points No Rectification Fullwave +ve halfwave -ve halfwave None and 7 selectable settings 4 gates utilising up to 32K samples each Hardware interface trigger for gate and DAC For each gate up to 80 peaks (N + largest), first peak, largest peak Peak processed data and/or full digitised waveform - Input Noise Gain Linearity Input Impedance Bandwidth Analogue Filters Digital Filters Channel Crosstalk Distance Amplitude Correction DAC Dynamic Range Digitiser and Digital Processing ADC Resolution Amplitude Resolution Sample Rate Number of ADC’s Acquisition Gate Delay Acquisition Gate Rectification DAC Trigger No of DAC curves DAC update DAC Clock Smoothing Hardware Gates Interface Echo Hardware Peak Processing Output Options Discrete selection Selectable 5 settings (selectable) Selectable 1 sample point 1 sample point Selectable - Peak NDT Ltd, Unit 1, Enterprise Way, Jubilee Business Park, Derby, DE21 4BB Tel: +44(0)1332 738752 Fax: +44(0)1332 73887 E-mail: sales@peakndt.com www.peakndt.co.uk NOTE: Peak NDT Ltd. reserves the right to change these specifications without notice. Parameter Range Step Size Threshold Averaging Gain Reduced Firing 10 to 4095 2 to 256 realtime Selectable to be triggered on saturation with programmable adjustment level 1 General Specifications Interfaces Communication Interface Inter-system Master Slave Output Data Buffer Digital Encoders Digital I/O Analogue Outputs 100 Base-T Ethernet Up to 6.7MBytes/s N/A 6Mbytes 2 axes of 32-bit inputs accepting 5Volt encoders at rate ofup to 700kHz 1 input/output (5Volt TTL compatible) Trigger Connectors UT Connectors Ethernet Connector Encoder Connector I/O Connector Power Connector Analogue O/P Connectors Coaxial LEMO EPS 00.250.NTN (2, 4 or 8 depending on model) IP67 rated 9-pin D-type LEMO EXG.1B.310.HLN LEMO EXG.1B.310.HLN LEMO EXG.0B.302.HLN (for aux Power) LEMO EXG.1B.310.HLN Physical Case Size IP Rating Power Supply Power Consumption Weight 160mm x 45mm x 108.5mm IP64 48V DC from Ethernet (Class 3) or separate supply (48V 300mA) 10W Max 550g Environmental Operating / Storage Conditions EMC Safety Operating Temperature: 0 to 40°C Storage Temperature: -10 to 55°C Relative Humidity: less than 85% non-condensing EN61326 EN61010 Peak NDT Ltd, Unit 1, Enterprise Way, Jubilee Business Park, Derby, DE21 4BB Tel: +44(0)1332 738752 Fax: +44(0)1332 73887 E-mail: sales@peakndt.com www.peakndt.co.uk NOTE: Peak NDT Ltd. reserves the right to change these specifications without notice.