COBALT PHOTOMETRIC GUIDE DIMENSIONS 340 dia. 420 420 280 280 140 140 140 140 150 280 280 200 420 CANDELAS PER 1000 LUMENS 420 CANDELAS PER 1000 LUMENS CANDELAS PER 1000 LUMENS 115 50 100 15/23W LED PLAIN VERSION 18W LED HOOD VERSION 38W 2D LAMP (Ceiling mounted) Luminaire Lumen Output: 15W = 1070lm 23W = 1450lm Luminaire Lumen Output: 18W = 720lm D.L.O.R. 59% / U.L.O.R. 0% Factor: 28W 2D OPAL = 0.75 38W 2D OPAL = 0.75 28W 2D SATIN = 1.03 REAR CONDUIT ENTRY: 1 x Spot face, drill as required. (Hood versions) 220 63 SIDE CONDUIT ENTRIES: 4 x Spot faces, drill as required REAR CONDUIT ENTRY: 1 x Spot face, drill as required. (Plain versions with lamp) OPTIONS DESCRIPTION Photocell s PC EXAMPLE CT 14441LPC DESCRIPTION Tamper-resistant screw kit including key CAT. No. CT 11699 s Hood / hood & grill versions only 256 www.thorlux.com/exterior 220 REAR CONDUIT ENTRY: 1 x Spot face, drill as required. (Plain versions with LEDs) ACCESSORIES SUFFIX FIXINGS: 4 x Spot faces, drill as required Jan. 15 COBALT Plain Hood Plain & Grill Hood & Grill TC-T 2D LED SPECIFICATION l Strong die-cast LM2 aluminium body and cover frame. Graphite, full polyester powder finish as standard l Silver or white finish options l Two diffuser options - opal or high efficiency satin polycarbonate l Choice of cover styles Complies with M.O.D. JSP482 Chapter 8 Document for ‘Category C’ areas l l l LAMP PLAIN HOOD APPROX. VERSIONVERSION kg PLAIN & GRILL HOOD & GRILL APPROX. VERSION VERSION kg 15W LED CT 14538L 3.0 CT 14540L 18W LED CT 14441L u3.0 23W LED CT 14542L 3.0 CT 14544L CT 14504L u 3.2 3.2 3.2 26W TC-T nCT 11572J u3.3 CT 11573J 3.7 CT 11574J 28W 2D s CT 11575J 3.7 CT 11576J 38W 2D s CT 11581J u 3.5 3.9 3.9 CT 11461J u 26W TC-T nCT 11460J u3.1 CT 11462J 3.5 28W 2D s CT 11464J 3.5 38W 2D s 3.3 HIGH EFFICIENCY SATIN DIFFUSER IP66 IK10 RANGE OPAL DIFFUSER IP66 CIRCULAR LED AND COMPACT FLUORESCENT LUMINAIRES s n 3500K lamp fitted 4000K lamp fitted Photocell option Photocell option u Fitted with lamp or 5000K/5700K LEDs CIRCUIT TYPE - J - non-dimming (HF fluorescent) / L - non-dimming (LED) LED CHARACTERISTICS Ra 15/23W - 70+ 18W - 65 °K 15/23W - 5700 18W - 5000 L70/B10 60K P/U % >90 R/Rx PF >0.95 P R LL/CW COLOUR OPTIONS - add suffix: SV3 - Silver / W9 - White e.g. CT 14538LSV3 etc. EMERGENCY VERSION - prefix catalogue number with: ECT - Emergency / TCT - AutoTest / DCT - Scanlight AT (LED versions only) e.g. ECT 14538L etc. Emergency, AutoTest and Scanlight AT versions add 0.7kg to weights listed or 0.3kg for LED versions NOTE: Lamp more visible with High Efficiency Satin Diffuser than Opal Diffuser when lit 59.4 15W Plain & Grill 39.7 23W Plain 58.0 23W Plain & Grill 38.4 18W Hood 32.7 18W Hood & Grill 35.0 15W Plain For LED characteristics explanation see www.thorlux.com/led-characteristics High efficiency satin diffuser Opal diffuser Web link: Jan. 15 Smart External System www.thorlux.com/exterior 257 SEGIN M SEGIN M - LED 3600lm/740 1x42W, LED DRIVER, RAL 9006 DOWNLOADS Datasheet Product sheet Installation manual 3DS file IES file LDT file EEC Description MOUNTING LIGHT SOURCE OPTICAL SYSTEM PRODUCT DETAILS UPCOMING NEW FASTRUNNER UPDATED ON DEMAND Dimensions Pole top / side entry installation (PMT) LED Lenses (LNS) Reflector LIGHT DISTRIBUTION Direct WIRING Electronic control gear FIX / DALI / 1-10 V / STEP DIM / INT DIM (ECG / EDA / E10 / EDB / EDP) MATERIALS Cover: PC Frame: sheet steel Housing: die-cast aluminium Reflectors: aluminium (MIRO4) Tiltable spigot: die cast aluminium SURFACE FINISH Housing: grey RAL 9006 (G06) ACCESSORIES External lead-in flexible cable VOLTAGE 220-240 V, 50-60 Hz NET LUMEN OUTPUT (Ta=25°C) 3600 lm POWER CONSUMPTION 42 W SYSTEM EFFICACY 86 lm/W CORRELATED COLOUR TEMPERATURE 4000 K COLOUR RENDERING INDEX 70 Ra LUMINOUS FLUX TOLERANCE +/- 10 % EEC A++ / A+ / A PROTECTION CLASS II SERVICE LIFETIME Up to 100,000 hours / L80 AMBIENT OPERATING TEMPERATURE From -35 °C to +40 °C IP PROTECTION DEGREE IP67 MECHANICAL IMPACT RESISTANCE IK10 WINDAGE AREA SIDE / TOP 0,026 / 0,194 m² RECOMENDED MOUNTING HEIGHT 5-8 m REPLACEMENT OF STANDARD HPS 70 W SURGE PROTECTION 10 kV DIMENSIONS (L x W x H) 643 x 345 x 85 mm WEIGHT 10 kg REALTA LEDbar ACCESSORIES DESCRIPTION CAT. No. PATENT APPLIED FOR APPROX. kg Single luminaire pole mounting attachment (for 60m dia. poles) RL 13759 1.6 Twin luminaire pole mounting attachment (for 60m dia. poles) RL 14175 2.6 GLB 11184 0.8 76/60mm dia. spigot adaptor (for retro-fit on 76mm dia. columns) Single luminaire pole mounting attachment OPTIONS DESCRIPTION SUFFIX EXAMPLE Photocell (standard versions only) Tamper resistant screws u The LEDbar substitutes the conventional Realta lamp source with an 18W LED lamp package. The aluminium bar dissipates the heat generated by the LEDs for optimum performance. 250 www.thorlux.com/exterior u To fasten tamper resistant screws order special screwdriver KEY 10008 Twin luminaire pole mounting attachment Jan. 15 PC RL 14436LPC T RL 14436LT REALTA Smart External version HIGH PERFORMANCE LUMINAIRES DESIGNED TO MINIMISE LIGHT POLLUTION AND ENERGY CONSUMPTION IP66 IK10++ / IK10 / IK06 Wide distribution TC-T Area distribution LED Realta Design Registration Number 3024955 SPECIFICATION Graphite full polyester powder finish. Silver option l l Strong die-cast LM2 aluminium body High efficiency prismatic polycarbonate or borosilicate glass front refractor l LED versions with excellent performance l Wide distribution (18W LED & 42W TC-T) RANGE LAMP Highly specular, multi-faceted injection moulded vacuum metallised reflector SMART EXTERNAL or area distribution (32W LED) options l Excellent distribution with less than 2% upward light component l l WIDE AREAAPPROX. DISTRIBUTION DISTRIBUTION kg IK10 Polycarbonate Cover 18W LED RL 14437D 3.9 32W LED RL 15850D4.0 Optional photocell control IKIK10++ Polycarbonate Cover 18W LED RL 14436L 3.8 32W LED RL 15849L3.9 Conventionally switched and Smart External versions 42W TC-T Fitted with 4000K lamp(s) or 5000K LEDs (18W) and 5700K LEDs (32W) IK06 Glass Cover l l 18W LED CHARACTERISTICS Ra 65 P/U P °K 5000 % >85 L70/B10 60K R/Rx R PF °K 70+ 5700 P/U % >88 P L70/B10 60K R/Rx R PF >0.95 3.6 18W LED RL 14438L 4.6 42W TC-T RL 13528J 4.5 CIRCUIT TYPE - J - non-dimming (HF fluorescent) / L - non-dimming (LED) Smart External versions use digital dimming gear and are always suffixed D 61.9 Glass 52.4 SILVER OPTION - add suffix SV3 e.g. RL 14437DSV3 etc. EMERGENCY VERSION - prefix catalogue number with: ERL - Emergency / TRL - AutoTest / DRL - Scanlight AT e.g. ERL 15850D etc. Emergency, AutoTest and Scanlight AT versions add 0.4kg to weights listed Lamp version emergency operation is provided by a sustained emergency lamp (fitted) - 5W TC-S 32W LED CHARACTERISTICS Ra RL 13535J LL/CW Polycarbonate >0.95 STANDARD TC-T versions with high frequency tri-lamp ballast enables retro-fit of 26 and 32W lamps l 42W TC-T versions use electronic control gear LL/CW 73.0 For LED characteristics explanation see www.thorlux.com/led-characteristics Web link: Jan. 15 Smart External System www.thorlux.com/exterior 251 REALTA PHOTOMETRIC GUIDE PERFORMANCE GUIDE - Wide Distribution Photometric Performance 18W LED with polycarbonate cover 120 SPACING CANDELAS PER 1000 LUMENS POLYCARBONATE COVER - 42W TC-T (Wide Distribution) D.L.O.R. 55% / U.L.O.R. 2% AVERAGEUNIFORMITY ILLUMINANCE (min/av) 3m mounting height - 3m forward throw 240 360 Spacing 10m ctrs 15m ctrs 20m ctrs 18 lux 12 lux 10 lux 0.53 0.49 0.35 Mounting height 4m mounting height - 4m forward throw 10m ctrs 15m ctrs 20m ctrs 15 lux 9 lux 7 lux 0.64 0.55 0.49 Forward throw e.g. At 3m mounting height and 10m centres: 18 lux average horizontal illuminance at ground level 5m mounting height - 5m forward throw 300 600 900 10m ctrs 15m ctrs 20m ctrs 10 lux 7 lux 5 lux 0.56 0.49 0.55 FIGURES ARE BASED ON INITIAL LUMENS CANDELAS PER 1000 LUMENS POLYCARBONATE COVER - 18W LED (Wide Distribution) D.L.O.R. 98% / U.L.O.R. 2% Luminaire Lumen Output: 18W = 1430lm ENERGY SAVINGS COMPARISON - Installation of 25 luminaires 18W LED 42W CFL SMART SAVING 120 240 360 CANDELAS PER 1000 LUMENS POLYCARBONATE COVER - 32W LED (Area Distribution) D.L.O.R. 98% / U.L.O.R. 2% Luminaire Lumen Output: 32W = 2700lm Circuit (W) 4724 23 Burn hours per annum 4,3801,095 s 3,285 Annual kWh 5,1471,314 3,833 CO2 (kg) Cost n s n 2,728696 2,032 £617.58£78.84 £538.74 On-time reduced due to Smart presence detection Based on 12p/kWh 25 YEAR LIFE COSTING ANALYSIS - Installation of 25 luminaires 18W LED 42W CFL SMART SAVING 1250 Number of lamps replaced Total cost of relamping s £17,913£0 £17,913 Power usage for site (kWh) 128,66332,850 95,813 Electricity cost s n £25,719£3,283 £22,436 68,43017,560 50,970 6918 51 CO2 (kg) Number of trees required to absorb CO2 produced Based on inflation rate of 4% each year (includes travelling, access equipment, re-lamping and labour for 2 maintenance engineers) n Based on 12p/kWh s 252 www.thorlux.com/exterior 125 Jan. 15 REALTA LED version - area distribution LED version - wide distribution DIMENSIONS Spot marked for side entry on both sides. Customer to drill if required. Photocell location 18 Photocell location 220 318 1 x 20 dia. cable entry hole (IP66 grommet supplied) 3 x 6.5 dia. holes 290 266 157 100 262 Jan. 15 360 248 www.thorlux.com/exterior 253 COBALT PHOTOMETRIC GUIDE DIMENSIONS 340 dia. 420 420 280 280 140 140 140 140 150 280 280 200 420 CANDELAS PER 1000 LUMENS 420 CANDELAS PER 1000 LUMENS CANDELAS PER 1000 LUMENS 115 50 100 15/23W LED PLAIN VERSION 18W LED HOOD VERSION 38W 2D LAMP (Ceiling mounted) Luminaire Lumen Output: 15W = 1070lm 23W = 1450lm Luminaire Lumen Output: 18W = 720lm D.L.O.R. 59% / U.L.O.R. 0% Factor: 28W 2D OPAL = 0.75 38W 2D OPAL = 0.75 28W 2D SATIN = 1.03 REAR CONDUIT ENTRY: 1 x Spot face, drill as required. (Hood versions) 220 63 SIDE CONDUIT ENTRIES: 4 x Spot faces, drill as required REAR CONDUIT ENTRY: 1 x Spot face, drill as required. (Plain versions with lamp) OPTIONS DESCRIPTION Photocell s PC EXAMPLE CT 14441LPC DESCRIPTION Tamper-resistant screw kit including key CAT. No. CT 11699 s Hood / hood & grill versions only 256 www.thorlux.com/exterior 220 REAR CONDUIT ENTRY: 1 x Spot face, drill as required. (Plain versions with LEDs) ACCESSORIES SUFFIX FIXINGS: 4 x Spot faces, drill as required Jan. 15 COBALT Plain Hood Plain & Grill Hood & Grill TC-T 2D LED SPECIFICATION l Strong die-cast LM2 aluminium body and cover frame. Graphite, full polyester powder finish as standard l Silver or white finish options l Two diffuser options - opal or high efficiency satin polycarbonate l Choice of cover styles Complies with M.O.D. JSP482 Chapter 8 Document for ‘Category C’ areas l l l LAMP PLAIN HOOD APPROX. VERSIONVERSION kg PLAIN & GRILL HOOD & GRILL APPROX. VERSION VERSION kg 15W LED CT 14538L 3.0 CT 14540L 18W LED CT 14441L u3.0 23W LED CT 14542L 3.0 CT 14544L CT 14504L u 3.2 3.2 3.2 26W TC-T nCT 11572J u3.3 CT 11573J 3.7 CT 11574J 28W 2D s CT 11575J 3.7 CT 11576J 38W 2D s CT 11581J u 3.5 3.9 3.9 CT 11461J u 26W TC-T nCT 11460J u3.1 CT 11462J 3.5 28W 2D s CT 11464J 3.5 38W 2D s 3.3 HIGH EFFICIENCY SATIN DIFFUSER IP66 IK10 RANGE OPAL DIFFUSER IP66 CIRCULAR LED AND COMPACT FLUORESCENT LUMINAIRES s n 3500K lamp fitted 4000K lamp fitted Photocell option Photocell option u Fitted with lamp or 5000K/5700K LEDs CIRCUIT TYPE - J - non-dimming (HF fluorescent) / L - non-dimming (LED) LED CHARACTERISTICS Ra 15/23W - 70+ 18W - 65 °K 15/23W - 5700 18W - 5000 L70/B10 60K P/U % >90 R/Rx PF >0.95 P R LL/CW COLOUR OPTIONS - add suffix: SV3 - Silver / W9 - White e.g. CT 14538LSV3 etc. EMERGENCY VERSION - prefix catalogue number with: ECT - Emergency / TCT - AutoTest / DCT - Scanlight AT (LED versions only) e.g. ECT 14538L etc. Emergency, AutoTest and Scanlight AT versions add 0.7kg to weights listed or 0.3kg for LED versions NOTE: Lamp more visible with High Efficiency Satin Diffuser than Opal Diffuser when lit 59.4 15W Plain & Grill 39.7 23W Plain 58.0 23W Plain & Grill 38.4 18W Hood 32.7 18W Hood & Grill 35.0 15W Plain For LED characteristics explanation see www.thorlux.com/led-characteristics High efficiency satin diffuser Opal diffuser Web link: Jan. 15 Smart External System www.thorlux.com/exterior 257