NEW - Keg King

advertisement

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Sm ith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Keg Master – Grand Deluxe (Black Enamel)

These Grand Deluxe Models come in two different sizes. We have a 2 door and also a 3 door model.

These model feature:

 Internal LED Light

 Full Stainless Steel

Internal Lining

 Integrated Font Fan

Assembly

Integrated Drip Tray

Powerful Italian made Embraco compressor

 Locking Doors

304 Grade Stainless Steel Counter

 Pre-Drilled Holes for the Fonts

IF YOU REQUIRE MORE INFORMATION EMAIL US FOR A SPEC. SHEET

NOTE: FONT AND TAPS, ARE SOLD SEPARATELY.

* Due to the large size these units are excluded from Free Shipping

Part Number

007513 - GD125

007537 - GD185

RRP

$1499.00

$1999.00

Grand Deluxe – Glass Doors

We also sell the upgrade to glass doors for the

GD125 and the GD185. The glass doors are double glazed toughened glass and are made with an anodized aluminum trim.

As well as looking great the glass doors are a practical option for installations in a commercial bar or restaurant.

The GD125 has a left and right and door.

The GD185 has one left and two right hand doors.

NOTE: The doors are not compatible between the two different fridge models as the GD125 and the

GD185 have slightly different door openings.

Part Number

007544 – GD-125 Left Glass

Door

007551 – GD125 Right Glass

Door

007568 – GD185 Left Glass Door

007575 – GD185 Right Glass

Door

RRP

$99.00

$99.00

$99.00

$99.00

Page 1 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Smith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Keg Master – Series 3

Includes:

PREMIUM MKII CO2 regulator

Gas splitter for 2 tap and triple tap model

Single, double and triple font model available

1, 2, or 3 Forward Sealing Acetyl Draft Taps included

Guard rail &Drip tray

Gas and beer line

Wire shelves

Castor wheels

CO2 cylinder mounting bracket

 Some hose clips, tap tool, spare seals

Other Kegerators Features

Part Number

-4C and up to 28C

Air circulation fan and digital thermostat

Metal Floor Protector

 62cm (width) x 61cm (depth) x 91cm (height - excluding guard rail, fount and drip tray)

006554 (single tap model)

004017 (double tap model)

006561 (triple tap model)

Approx 164L fridge

RRP

$589.00

$599.00

$634.95

Page 2 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Sm ith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

A – Type Keg Coupler

Includes:

Beer and gas valve

Beer and gas barbs

Also known as German slider, Tooheys, Coopers, XXXX keg coupler.

Part Number

004147 – Stainless Steel/Alloy

RRP

$79.95

Nickel Coated & Full Stainless Steel D-Type Keg Coupler

Includes:

Beer and gas valve

Beer and gas barbs

Also known as American sankey coupler, CUB, Fosters,

Carlton Draft, VB coupler.

Part Number

004130 – Nickel Coated Alloy

006196 – Full Stainless Steel

RRP

$59.95

$69.95

S-Type Keg Coupler

Includes:

Beer and gas valve

 Beer and gas barbs

Used for Heineken, Asahi, and some other imported and local beers.

Part Number

004154 – Nickel Coated Alloy

RRP

$59.95

Low Profile Elbow Bend

This low profile elbow bend is THE LOWWEST elbow bend available in Australia.

It only sits 17mm above the top of the keg coupler. Perfect for tight spaces or inside a kegerator.

 Made from solid Stainless Steel

(picture shown on coupler to right)

Part Number

004765

RRP

$ 24.95

Page 3 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Smith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Double & Triple Tap Chrome Font (without taps)

Features:

Internal foam insulation

78mm diameter

 Single: 300mm height (without taps)

Double: 310mm height (without taps)

 Triple: 390mm height (without taps)

Note: Does not include draft taps as shown in photo (left&right)

Part Number

004055 (single tap)

004062 (double tap)

004109 (triple tap)

RRP

$39.95

$59.95

$79.95

Single, Double & Triple Font Kit

(packed with taps, beer line, clamps, and faucet tool)

This complete font kit includes font, beer taps, 4 meters of beer line per tap, some clamps and a faucet tool. We sell a single, double and triple tap font kit and the whole set of gear works out to be great value.

Kit Includes

Chrome plated font

 Acetyl forward sealing taps

 4 meters of 5mm ID beer line per tap

 Faucet tool

 Stainless Clamps

Part Number

006592 (single tap)

006608 (double tap)

006615 (triple tap)

RRP

$59.95

$89.95

$115.95

Page 4 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Sm ith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

4 Tap ‘Tee’ Font – Commercial Grade Stainless

Features:

Commercial grade 304 stainless

Part

Number

004161

RRP

$169.95

Cobra Single,

Double, & Triple

Flooded Font –

Commercial

Grade

Tap

Fonts include a glycol coolant loop to chill down font. This type of font is used with an icebank or chiller (such as our

Icemaster 225). the ideally glycol

Give your bar at home a professional look with solid built cast brass and chrome plated these fonts. Each font comes with 1, 2 or 3 product lines plus 2 additiona coolent lines that run up and down the font to keep the beer lines chilled in the font.

Part Number

007230 (Single Cobra Font)

004178 (Double Cobra Font)

007223 (Triple Cobra Font)

RRP

$159.95

$169.95

$189.95

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Smith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Font Fan Kit

These font fan kit is the easiest way to chill the font of your kegerator.

The kit includes a 12volt power pack, the blower box that blows air up the provided tube into your font.

The blower box can just sit in the kegerator as shown in the photo (to the right).

This will cool your font down and reduce any foaming issues you might have caused by a warm font.

The fan also increases air circulation in the fridge which will help get your kegs in the fridge colder quicker. In many instances it will reduce the serving temperature of the beer by as much as 3 degrees

Celsius.

Part

Number

004253

RRP

$49.95

Page 5 of 78 Page 6 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Sm ith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Carbonation Cap

This carbonation cap is a screw-on cap with an integrated Cornelius ball lock fitting. It is designed to fit onto most soft drink PET bottles. The carbonation cap is highly effective method to add and maintain carbonation in beverages for extended periods of time. Made from 304

Stainless Steel the carbonation cap will last years of use with virtually no maintenance.

With this cap you can simply fill an old PET bottle with cold liquid of your choice and carbonate by connecting your gas ball lock disconnect.

Make your own soda water, carbonate beer, or even make your own soft drinks.

Part Number RRP

005458 $14.95

GREAT NEW PRODUCT

Carbonation & Line Cleaning Cap & Counter Pressure

Bottle Filling Device

This new model carbonation cap does everything that the carbonation cap does(above) but this comes with several added features.

The post on this unique carbonation cap has been machined so it fit BOTH the black and grey ball lock disconnects. This carbonation cap also includes a barbtail on the underside so you can attach some beer line to act as a dip tube. This allows the carbonation cap to be used in several different ways including:

1. Carbonate

2. Cleaning your beer lines

3. Use it to counter pressure bottle fill PET bottles

WATCH THE VIDEO WITH THIS LINK: https://www.youtube.com/watch?v=KQg8Qb3OS7U

Part Number

007346

RRP

$19.95

Page 7 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Smith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Cornelius Type Ball Lock Post for Keg Coupler

These new parts are extremely handy so you can connect you ball lock disconnects to your keg coupler.

The part is basically has a 5/8” thread on one side and on the other side it has a ball lock disconnect post.

The part is completely made from solid stainless steel.

Part Number

005465 (Gas)

005472 (Liquid/Beer)

RRP

$14.95

$14.95

Page 8 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Sm ith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Draft Taps

Above (left to right): Flow

Restrictor Draft Tap(004093),Regular Draft Tap(004079), Long Shank Draft

Tap(004086), Long Shank Tap with Flow Restrictor (004192)

Right: Full Stainless Steel Brumby Style Tap with Stainless Handle (005533)

The regular draft tap is what you will need to attach to most fonts. The flow restrictor tap is similar to the regular draft tap with the main difference being able to control the resistance in the line with a leaver on the right hand side of the tap. We also offer a brumby style tap in Full Stainless Steel which is commercial grade.

The long shank taps are for people who would like to make their own

Kegerator or mount the tap into a cool room wall or fridge door. Just drill a 21mm hole and the shank will slot straight in.

Part Number

004079 (Regular Brumby)

004093 (Flow Restrictor)

004086 (100mm Long Shank

Brumby)

004192 (80mm Long Shank

Tap with Flow Restrictor)

005533 (Stainless Brumby)

RRP

$29.95

$49.95

$34.95

$69.95

$49.95

Two Piece Decal Holder

These decal holders are literally made to support your brand name.

Due to the novel two piece design the sliding base moves up and down allowing the decal to be fitted to ANY TAP design so there is no issues with incompatibility.

Also, as the sliding base can be removed with a Philips head screw driver there is no need to remove the tap from the front to fit the decal.

It simply fits over the tap and you do up the screws on the underside.

The holder will support a sticker or decal up to 73mm in diameter.

NEW DESIGN NEW LOW PRICE

Part Number

007988

RRP

$13.95

Page 9 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Smith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

New Forward Seal Type Taps

These unique “seal forward” taps eliminate the need for a valve shaft like other less sanitary taps. Beer is not exposed to air so the handle does not stick and there is no build-up of mould and bacteria in the tap body. The polished interiors makes smooth flow to ensure perfect pour. These taps are available in a stainless steel

(part#6332) and Acetyl plastic (part#6349) and long shank (part#6752). These taps include shanks and are spring return so the tap closes when you let go the handle.

Part Number

006332 (Stainless Forward Seal tap)

006349 (Acetyl Forward Seal Tap – short shank)

006752 (Acetyl Forward Seal Tap - 80mm long shank)

RRP

$49.95

$24.95

$24.95

Page 10 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Sm ith Rd

Pluto Beer Gun with Barb Fitting

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

NEW LOW PRICE

These pluto beer guns have become an iconic beer dispensing tool used throughout the industry.

NEW

We now offer 3 types. We have a full stainless steel type (as seen on left) and also a new plastic stainless composite (as seen on right) and a premium stainless model below. They all come with barbs so they will fit all standard beer line

(4mm-6mm ID). The plastic/stainless composite beer guns have a ABS plastic body with stainless barb, stainless piston and stainless spring.

Part Number

004741 (economy stainless)

005960 (plastic/stainless composite)

RRP

$45.95

$24.95

Premium 304 Stainless Pluto Gun

5 YEAR WARRANTY

Similar to the full stainless pluto gun (above) but with a much higher level of workmanship this premium pluto gun is ideal for use in a commercial environment. The gun is indestructible and apart from the seals it is entirely machined out of stainless steel and you can feel it in the weight and feel when you pick it up.

This heavy duty gun comes with 5 year warranty.

The accurately machined bore gives smooth laminar beer flow for foam free dispensing.

Part Number

007957 (premium stainless)

RRP

$74.95

Picnic/Bronco Party Tap

This standard, black plastic hand held picnic tap is the first choice for many BBQs or university parties.

Most commonly called a "picnic faucet” this simple to use beer tap comes with a 6mm Barb which will ideally suit 5mm ID beer line.

Part

Number

007285

RRP

$3.95

Page 11 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Smith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Perlick Brand Taps

These original Perlick brand taps are done in either stainless steel (525SS) or chrome plated brass (525PC). We can either sell the taps without shank (as seen in picture top right), with short shank to mount into a font (as shown in picture to the left), or with a long shank to mount through a fridge door or esky wall (as shown in photo to bottom right). All these taps include the black plastic tap handle.

Part Number

RET9354 – 525SS (with long shank

100mm)

RET9361 – 525SS (with short shank)

RET9378 – 525SS (tap only)

RET9385 – 525PC (with long shank

100mm)

RET9392 – 525PC (with short shank)

RET9408 – 525PC (tap only)

Euroball Flow Restrictor Tap

These euroball design taps are made with stainless steel spout, shank and internal components. The than handle and casing is chrome plated brass. They have an included flow retrictor on the shank making it easy to adjust the flow rate.

The ball valve design is extremely reliable, gives smooth laminar beer flow even at very high dispense pressures (up to 120psi/800kpa). As well as dispensing wine and beer these taps are also suitable for carbonated water dispensers.

RRP

$72.95

$67.95

$52.95

$55.95

$49.95

$34.95

NEW

Part Number

007810

RRP

$59.95

Page 12 of 78

NEW

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Sm ith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Stainless Stout Tap with Cremer/Aerator

These stout taps come equipped with the cremer/aerator for that cascading head effect. If you are using this tap for standard draft beers the aerator/cremer can be removed by unscrewing the nozzle and taking out the aerator disk.

Part Number

007834

RRP

$59.95

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Smith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

3 in 1 Faucet Spanner

This handy tool is exactly what you need to fit your beer taps to your font. The spanner is a 3 in 1 tool and will fit:

1. Will fit 27mm nut to attach the tap to your font. (see picture to right)

2. Will fit 5/8inch hex nut that will attach to the back of the tap shanks or keg couplers.

3. Will fit the ring collar that tightens the faucet to the tap shank.

Part Number

RET9736

RRP

$5.95

Page 13 of 78 Page 14 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Sm ith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Deluxe Party Pump Kit – (Picnic Pump)

Easy way to dispense a beer keg when you are away from electricity. No bulky CO2 cylinders to worry about. Just put the keg in a bucket of ice and pump the beer out at your own leasure.

Features

 Ergonomic design

 Easy to use

No gas cylinder required

 No electricity reguired

Note: Does not include keg coupler or keg as shown in photo

(left). These are sold separately.

Beer must be consumed within 48 hrs of using the pump.

YouTube Link on how to use this product: http://youtu.be/u92RFu9QByQ

Part Number

004048

RRP

$109.95

Party Pump Kit – (Picnic Pump)

This unit does exactly the same job as the “Deluxe

Party Pump” with the main difference being the tap. The tap is just a plastic tap and beer line.

Note: The price does not include keg coupler. This is sold separately.

YouTube Link on how to use this product: http://youtu.be/u92RFu9QByQ

Part Number

004031

RRP

$59.95

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Smith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Bottle Filler Beer Gun

Fill bottles quickly, easily, without the risk of oxygenation and without complicated counter pressure filling equipment. This easy to use

Bottle Filler Beer Gun works with almost any bottle size and shape. The gun comes with two triggers. One that will purge the bottle of oxygen and the other that will dispence the beer. This gun is also suitable for win bottling or dispencing directly into glass for immediate drinking. For more information on this product CLICK HERE .

All components in contact with beer are made from stainless steel or silicone.

The Bottle Filler Beer Gun includes beer line, 2 stainless clamps and the gun itself.

WATCH THE VIDEO WITH THIS LINK: https://www.youtube.com/watch?v=U1HYrgRhA-4

Part Number RRP

007124 – Bottle Filler Beer Gun

007131 – Replacement Silicon Tip

$74.95

$1.95

Page 15 of 78 Page 16 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Sm ith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Domed Stainless Steel False Bottoms

Now Larger Sizes

These false bottoms are great for anyone trying to make their own mash tun or lauter tun. The 30cm diameter type will fit into any 50L type keg including standard CUB(EURO Keg) or Tooheys

(DIN Keg) designs. The 40cm diameter usually good for puts up to 100L and the 50cm design is suitable for our 200L brewery pots (Part#:007735).

Features: Full stainless steel with 13mm stainless steel barb and ½” elbow.

Part Number

004598

(30cm)

007964

(40cm)

007971

(50cm)

RRP

$39.95

$59.95

$99.00

Polyester Brew in a Bag Bags and Hop Socks

These polyester brew in a bag bags are perfect for grain brew in a bag or for hopping beer. Two sizes are available (both can be used up to 110 C).

Large Brew in a Bag Bag with draw string

: This is made to line your pot up to 55cm in diameter.

(dimensions 80cm wide x 55cm deep)

Small Bag/Hop Sock

: This is a tube of fabric that is 15cm in width and 75cm long. Both ends are open for easy cleaning and can simply be tied closed while being used. Perfect for grain or hops.

Part Number

005342 – Hop Sock/Small Bag

007407 - 20 x Bulk Buy Hop Socks

RRP

$4.95

$24.95

RRP

$9.95

Part Number

005359 – Large Grain Bag

Part Number

15L Wash Out / Line Cleaning Keg

These 15 Litre wash out kegs are the easiest way to clean out your beer lines.

Simply fill the wash out keg with beer line cleaner

(Part#6172) then hook up your keg coupler just like you would an ordinary beer keg.

The handy wash out keg includes both a-type and d-type spears so you only need the one wash out keg for both keg coupler types.

NEW

Page 17 of 78

RRP

008053

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Smith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

$199.00

Nested Mash Brewing 60/40L Pots for Single Vessel

Brewing

These single vessel brewing pots are great for mash brewing.

The aluminium is more conductive than stainless pots making these pots idea for direct heat. The pots come as a set with a large 60L outter pot with lid and a nested inner 40L inner pot that has a perforated false bottom. This allows you to place grain in the inner pot for mashing. When finished mashing simply lift out the inner pot and use the outter pot to boil. The assembly can also be used in conjuction with RIMS heat stick and pump to upgrade this to a recirculating system in the future.

Part Number

006462

RRP

$199.95

Sodastream Cylinder Adapter

Use a Sodastream cylinder to dispense/carbonate your kegs. This is the ideal unit for the low volume user, or someone who does not want to put a lot of capital into purchasing a larger CO2 Cylinder. The adapter fits between the soda stream cylinder and the CO2 Regulator as shown in photo above.

Soda stream cylinder adapters are also great for small portable keg setups.

Part Number RRP

004772 $ 22.95

Page 18 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Sm ith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Quality Stainless Steel

Reinforced Base Pot

These stock pots are made from stainless steel with triple base construction. That means each base has a layer of aluminum inside to even out the temperature. This reduces the chance of scorching or caramelising your wort. It also reduces the chance of boiling over.

Features:

 1.0 - 1.2mm thick stainless steel wall

Triple bottom base (stainless/aluminum/stainless)

 Heavy duty handles

Included commercial grade lid

Part Number

004536 (29 litre )

004567 (92 litre)

RRP

$ 199.00

$ 369.00

Page 19 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Smith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Resin Tap Handles

NEW

LOW

PRICE

Wanting to pimp up your taps. Try one of these coloured resin tap handles. Available in a wide range of colours as shown above. They will fit any one of our draft taps.

Size

: 145mm tall x 28mm diameter

From left to right

: Yellow, Blue, Orange, Purple, Red

Part Number

004024

RRP

$5.95

30cm High Resin Tap Handles

NEW

These large ornamental tap handles come in 7 different colours. Being made in wood they are also very easy to pain yourself if you want a different colour.

PART NUMBERS (left to right)

007865 - Black

007889 - White

007858 - Silver

007872 – Blue

007896 - Yellow

007902 – Green

007841 - Red

Part Number

SEE ABOVE

RRP

$16.95

Page 20 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Sm ith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Door Mounted Drip Trays

Part Number

004437

(30cm)

004444

(40cm)

Features:

Made with high quality stainless steel

Excellent craftsmanship

Removable grill

Available in different widths

 20cm Width (004420)

30cm Width (004437)

40cm Width (004444)

RRP

$59.95

$63.95

40cm Counter Sunk / Recessed Drip Tray

These counter sunk drip trays are made for

304 grade stainless steel. They are designed so that you can cut a hole in your counter/bar top and have the top of the drip tray flush with the top of your bar.

There is a drain in the centre of the drip tray so that a 10mm ID tube can be attached on the underside of the tray.

The drip tray is 40.5cm x 17.0cm and you will need to cut a hole in your bar top that is

15.3cm x 39.0cm in order to counter sink this into the hole.

Part Number

007728

RRP

$39.95

NEW

Page 21 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Smith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Counter Top Drip Tray

Features:

Made with high quality stainless steel

Excellent craftsmanship

Removable grill

Available in different widths

 30cm Width (004468)

60cm Width (004475)

Part Number

004468

(30cm)

004475

(60cm)

RRP

$39.95

$49.95

Wrap Around Drip Tray

These wrap around drip trays are made to suit our fonts. The drip trays wrap around the font to make sure they catch all of the drips. They also look great.

There is 2 types, full stainless and stainless/plastic.

Full stainless (left): 17.7mm x 30.5cm x 2cm deep

(cut away diameter is 12cm)

Plastic/stainless (right): 31.5cm x 20cm x 2cm deep

(cut away diameter is 9.5cm)

Part Number

004482 (plastic/stainless)

006684 (stainless)

RRP

$29.95

$39.95

Flooded Drip Tray

Features:

 Removable grill

 Drainage hole

 33cm wide x 40cm deep

Part Number

004406

Page 22 of 78

RRP

NA

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Sm ith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

2.6kg and 6.0kg CO2 Gas Cylinders

Features:

Australian Standard Approved

Hold 2.6kg or 6.0kg of gas when full

 47cm in height for 2.6kg and 71cm in height for 6.0kg

2.6kg will fit in Keg Master Series 2 and Series 3 Kegerators without reducing the number of kegs it can hold

 Comes with included carry handle for easy of transport and protection of valve

Part Number

004345 – 2.6kg Cylinder (Full)

2.6kg Fill

004352 – 6.0kg Cylinder (Full)

6.0kg Fill

RRP

$199.00

$25.00

$249.00

$50.00

30L Wide Lid Fermenter – With Airlock,

Grommet, Tap and Thermometer

These 30L pail style fermenters are sold complete with airlock, temp sticker and tap. The smooth walls are easier to clean compared with other blow molded fermenters that have quite porous walls.

The fermenters are made from food grad PP (polypropylene) which is BPA free.

We do also sell additional airlock, stickers and taps separately.

(See picture to left)

Part Number

007353 - 30L Fermenter with

Airlock, Thermomenter, & Tap

RET0061 - Stick On Thermometer

RET0054 - Airlock

RET0078 - Tap

RET0085 - Grommet

NEW

RRP

$29.95

$2.50

$4.95

$2.95

$0.95

Page 23 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Smith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Stainless Steel Conical Fementers

Features:

Fully rotatable rack arm

Silicone beaded seals

 304 Stainless steel

Polished finish

Ideal for yeast propagation, professional pilot plant, or serious home brewer.

Please email us for drawing and specifications.

Part Number

006509 (50L)

007025 (100L)

006059 (300L)

006790 (300L Jacketed)

006066 (600L Jacketed)

RRP

$599.00

$945.95

$3450.00

$4850.00

$6900.00

1.5 Inch Tri Clover

Accessories

1.5 inch tri clover accessories in 304 stainless steel. These are for the 50L and 100L fermenters.

Part Number

007247

007254

007261

007278

007360 (1.5inch Clamp)

RRP

$14.95

$19.95

$4.95

$1.29

$8.95

Page 24 of 78

NEW

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Sm ith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

50L Kegmenter (Keg / Fermenter)

Part Number

007759

This is an economical multipurpose keg and fermenter (AKA

Kegmenter). It is pressurisable to 3.5bar so you can use the kegmenter to naturally carbonate or force carbonate. You can also push the beer from this vessel directly through a filter or even directly dispense to beer tap.

The kegmenters can also be stacked and have stackable interlocking chimes.

Features

:

 Made from food grade 304 stainless steel

 Can be pressurised up to 3.5Bar

 Includes ball lock post and pressure relief

Download Specification Sheet Here:

http://www.kegking.com.au/Downloads/50L%20Kegmenter.pdf

RRP

$289.00

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Smith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Quality Solid Stainless 100mm Weldless Thermowell

This weldless thermowell is made from solid 304 stainless.

It has a straight ½” BSP thread which is 40mm Long. It includes silicone o-ring, stainless steel slimline nut and also the extra long nut for mounting directly to our 3 inch dial thermometers.

This thermowell can also be used in conjunction with out digital temperature controllers. The probe will slight straight into the thermowell.

Part Number

005311

RRP

$34.95

NEW SHORT STEM

Bi-Metal 3” Dial Weldless Thermometer – Long&Short

Stem

NEW LOW PRICE

With this Keg King bi-metal thermometer you can brew with confidence. The weldless fitting means it will mount to your mash tun, hot liquor tank, or kettle.

We have both the

132mm long stem

(right) or the 40mm short stem (below) available.

NOTE: This is also compatible with the thermowell above or the plastic push-in bulk head below.

Features:

Calibration screw, 304 stainless steel housing and probe, ½” BSP thread, includes nut and 2xsilicone seals plus stainless washer, -5C to 100C customised for brewing.

Part Number

005328 (Long Stem)

007605 (Short Stem)

RRP

$29.95

$29.95

Bulkhead for Temperature Probe

This simple bulkhead fitting is made from plastic and can be used to mount your temperature probe from the temperature controllers or the 3” dial thermometers into a any thin wall vessel

(such as a pot or fermenter. It will accept any temperature probe or thermometer with 6-6.5mm diameter.

It is sutable for temperatures up to 105

0

C.

Part Number

005335

RRP

$12.95

Page 25 of 78 Page 26 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Sm ith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

16amp Relay Controller with Inbuilt Alarm, Heat & Cool

Designed for commercial use

Includes:

Temperature

Probe

Instructions

 Control Panel

Mounting Bracket

Features:

 Broad temperature operating range

(-45 o C – 120 o C) and high accuracy.

 Comes with included temperature probe

 0.1

o

C Accuracy

 High and Low Temperature Alarm with Optional Alarm Delay

 Celsius and Fahrenheit display option

 Independent Heating and Cooling Delay Start Control

16amp Realys with 10 amp Heating or Cooling capacity

Inbuilt alarm

“Fridge On” or “Heater On” Indicator Icon

YouTube Link on using this product: http://youtu.be/5ha5gsI8Gb4

Part Number

004246

RRP

$74.95

Digital Oven Thermometer with

Stainless Probe and Alarm

These inexpensive digital oven thermometers go from 0

0

C-

250 0 C. The magnet of the back of these enables you to stick them to your fridge or brewery. The thermometer probe is on a heat resistant stainless braided cord that is

120cm long can go up to 300

0

C and the stainless probe is

4mm diameter

The thermometer also comes with a temperature alarm and a time alarm. So you can set an audible alarm to go off at a specific set temperature or a use the countdown timer.

Part Number

007742

RRP

$13.95

30 Watt Heating Belt

Part Number

004574

The 30 watts will gentle warmth without creating a hot spot. Heating belts are preferable to heating pads for the reasons that they can simply be moved up or down the fermenter to increase or decrease the heat transfer to the brew. Heating belts are also preferable to heating pads because pads tend to heat up the yeast bed on the bottom of the fermenter which can produce some undesirable flavours in your beer.

RRP

$19.95

Page 27 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Smith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Keg King Chillout MKIII - 30 Plate Heat Exchanger

The Chillout MKIII is the fastest way to chill your wort to yeast pitching temperature to get your fermentation off to a quick healthy start.

The Chillout is made from stainless steel and brazed together with pure copper. It also has ripples up and down each plate. This creates more surface area and improves heat transfer.

Dimensions

:

315mm x 73mm x 73mm

Part Number

005304

RRP

$119.95

14 Meter Stainless Steel Immersion

Chiller

These stainless steel immersion chillers are an easy way to chill your wort. Simply connect standard ¾ inch BSP garden hose fittings to the end and run tap water through the chiller while immersed in your wort. This is idea for batch sizes up to 45litres.

Dimensions

:

Coiled part of the chiller: 28cm high x 26cm diameter

Total height of the chiller: 65cm

12mm x 14meter 304 Stainless with ¾” BSP female/male fittings

Part Number

006707

RRP

$159.95

Page 28 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Sm ith Rd

Springvale, VIC, 3171

Now includes MFL

16m Stainless Steel Cooling Coil

threaded fitting

Features:

Made from food grade 304 stainless steel

Ideal for chilling beer or creating your own jockey box

Specifications

- Stainless: Food grade 304 stainless steel

- Internal diameter: 6mm

- External diameter: 8mm

-

- Total Coil Height/Diameter:

19cm/25cm

No include 1/4inch MFL threaded fittings so you can connect parts#006004 or part#005281

Part Number

004116 (Cooling Coil)

007445 (Spare 8mm

Compression Fitting)

RRP

$119.00

$9.95

Jockey Box / Magic Box Cooler Kit

Part Number

RET9644

These jockey box kits include:

- Long shank draft tap

- 16meter stainless cooling coil (as above)

- 2 x push in fittings to attach your beer line to the coils

- Beer Line

All you need to do is BYO esky and drill holes in your esky.

If you want 2 taps in your esky you will need to purchase 2 kits. Kit’s include usage and assembly instructions. If you would like a PDF copy of the instructions just email us.

RRP

$158.95

Page 29 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Smith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

10inch Beer Filtering System

Features:

Clear high pressure housing

Purge valve to expel air pockets

½” BSP inlet and outlet

Includes brass ball valve

Brass threaded ports for durability

Compatible with other 10” filter systems

Note: Does not include filter cartridge.

Part Number

004512

RRP

$24.95

1 Micron Absolute Reinforced Washable Cartridge

Features

10inch for compatibility

 Indestructible PE reinforced plastic shell to protect your filter from rupturing, or physical damage.

Washable (recommended wash with Sodium Percarbonate)

1 micron absolute rated for most efficient filter action.

Part Number

004529

RRP

$19.95

0.5 Micron and 2 Micron Stainless Steel Diffusion Stone /

Air Stone

Use this 2 micron stone with an oxygen source or an aeration pump to provide your yeast with oxygen prefermentation.

This 0.5 diffusion stone can also be attached to the end of your “gas in” on your keg with 50cm of tubing to rapidly speed up carbonation.

CLEANING: This stone can be sanitised in boiling water and cleaned in a non-rinse sanitiser while running CO2 or air through the stone. If the pores in the stone get blocked from handling give a 10 second dip in hydrocloric acid before rinsing with water.

Part Number RRP

005298 (2 micron)

006660 (0.5 micron)

$11.95

$11.95

Page 30 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Sm ith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

MK II Dual Guage Multi Gas Regulator

CO2, Oxygen, Argon, Nitrogen

This new MK II regulator is made with high quality machined brass body and can be used on various different gasses. The regulator has large body for high flow rates and comes with precision diaphram for more accurate adjustment. Regulator also includes large adjustment know for easy adjustment. This regulator is can also be used on a range of different gasses including CO2, Oxygen, Argon,

Helium and Nitrogen. The standard “type 30” nut and stem comes fitted to the regulator for CO2 and

CO2/nitrogen mixed gasses. Other nut and stems and be interchanged:

Type 10 Nut and Stem (with ¼” thread NPT): Oxygen, Argon, Helium

Type 30 Nut and Stem (with ¼” thread NPT): CO2, CO2/Nitrogen Mixed Gas

Type 50 Nut and Stem (with ¼” thread NPT): Nitrogen

Part Number

006325 - Multi Gas Regulator

NEW LOW

RRP

$54.95

PRICE

006448 - (type 10 – nut & stem)

006042 – (type 30 – nut & stem)

006455 - (type 50 – nut & stem)

004321 – Replacement 0-3000psi Gauge

004338 – Replacement 0-80psi Gauge

$29.95

$29.95

$29.95

$9.95

$9.95

Add-On CO2 Regulator Adapter

Ideal for dispensing two draft beers that require different CO2 pressures. Modular design makes expension easy.

Simply remove the high pressure gauge from one regulator and screw this adapter. Then attach your other regulator directly to the other side of this adapter. The two threads are ¼”

NPT and Type 30 UNF to suit our CO2 regulators and many other Australian CO2 regulators.

Part Number

006189

RRP

$ 24.95

Regulator Double Adapter

Unlike the Add-On Regulator adator above this simple double adaptor will allow you to attach 2 regulators to the one gas cylinder without having to modify either of the two regulators.

Simply screw the double adaptor onto your gas cylinder then attach the two regulators.

Part Number

Page 31 of 78

RRP

RET3468

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Smith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

$ 44.95

Page 32 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Sm ith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Beer & Gas Line 30m Roll

Quality beer/gas line.

The internal walls are very smooth creating less turbulence. phosphoric acid, and caustic resistant.

Part Number

005083 4mm ID x 8mm OD - 30m Roll

005182 4mm ID x 8mm OD - Per Meter

005090 5mm ID x 8mm OD - 30m Roll

005199 5mm ID x 8mm OD - Per Meter

005106 6mm ID x 8mm OD - 30m Roll

005205 6mm ID x 8mm OD - Per Meter

The 3 sizes available all have the same OD so it will easily fit any John Guest style push in fittings (5/16” or 8mm). The beer line comes in three different sizes 4mm,

5mm and 6mm ID.

This line is also hydrochloric acid,

RRP

$25.00

$0.99

$25.00

$0.99

$25.00

$0.99

Food Grade Clear Vinyl Tube

This food grade vinyl tube is sold per meter or by the 30m Roll.

It is more malleable than the beer and gas line

(above) and comes in three different sizes:

5mm ID x 8mm OD

10mm ID x 14mm OD

13mm ID x 17mm OD

Part Number

6950 5mm ID x 8mm OD - 30m Roll

6967 5mm ID x 8mm OD – Per Meter

6974 10mm ID x 14mm OD - 30m Roll

6981 10mm ID x 14mm OD – Per Meter

6998 13mm ID x 17mm OD - 30m Roll

7001 13mm ID x 17mm OD - Per Meter

RRP

$25.00

$1.50

$40.00

$1.95

$45.00

$2.49

Page 33 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Smith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

JG Style Push in Fittings

We make all our push in fittings to suit

8mm (5/16) outside diameter (OD) beer and gas line. Just like the Beer/Gas line above.

These push in fittings are suitable to be used up to 100 psi. They are extremely easy to use and allow you to simply push your beer and gas line straight into these fittings.

No need to purchase clamps. To remove the fitting simply push in the blue collet and the fitting comes undone.

Part Number RRP

005410 – Push in Joiner

005397 – Push in Tee Piece

005403 – Push in “Y” Piece

006424 – Push in Ball Valve

005380 – Push in Elbow

$5.95

$5.95

$5.95

$9.95

$5.95

8mm Push in Fittings for MFL Disconnects & 5/8BSP

Thread

These great little adaptors screw directly onto your keg setup. They allow you to push your beer/gas line with 8mm OD

(5/16”) directly into the fitting. This makes it easy to disconnect the beer/gas line at a later stage and it eliminates the need to use hose clamps. We have two sizes. The smaller type (shown on left) that will fit MFL Quick Disconnects and also larger ones that suit 5/8” BSP thread that is on our keg couplers, tap shanks and many other beer related fittings.

Part Number RRP

006004 – Push in for MFL Disconnect

006011 – Push in for 5/8” Thread

$4.95

$5.95

8mm Push in Fitting x 1/2inch BSP

These push in fittings will screw right into any 1/2inch BSP thread and allow you to push any 8mm beer or gas line directly into the fitting.

! NEW !

Part Number

007094

Page 34 of 78

RRP

$5.95

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Sm ith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Stainless Stepless Clamps

These stainless clamps are the best for securing your beer and gas line to barbs/nipples. Unlike other hose clamps the secure the line in a complete and exact circle. Hence the name

“stepless” clamps.

We have two sizes. The 6-8mm will suit our 5mm and 6mm ID beer line. The 7-10mm ID will suit our 4mm ID beer line.

The clamps can be secured with a special crimping tool (part#6530) however normal wire cutters work just as well.

YouTube Link on how to use these clamps: http://youtu.be/bvCCC6TkqOs

Part Number RRP

RET0764 (suit 6-8mm OD)

RET0771 (suit 7-10mm OD)

$0.50

$0.50

Gas Line Splitters

These gas line splitters are sold as single pieces as shown in picture on the left. By purchasing more pieces you can split your gas line into as many outputs as you like. The fittings just simply push into each other and require no clips, or additional parts.

Features:

Easy to use and assemble

Modular

Come with brass barbs

Part Number

004123

RRP

$9.95

Page 35 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Smith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Gas Line Manifold Splitter with Check

! NEW !

Valves

These gas manifolds are rated to 100psi and include 2 or 4 or 6 gas line outputs with 1/4inch ball vales. Multiple of these can be easily joined together to make large manifolds of 8 or 16 outputs.

They are made complete from aluminium, brass and stainless so you know they are durable. They also include screw holes at the top for easy mounting to your gas board.

Each ball valve also includes a built in check valve to not only protect your regulator but also prevent gas or beer migrating from one keg to another.

RRP

$23.95

$39.95

$64.95

Part Number

007148 (2 way)

006677 (4 way)

007155 (6 way)

Gas Manifold Add-Ons

Multiple gas manifolds can be connected together using some ¼ inch hex nipple

(Part#:RET3741). This will enable you to make your manifold as large as you like. (shown to right)

The manifolds all come standard with 2, 4 or 6 output. These can be converted to 3, 5, or 7 output by simply unscrewing the

1/4inch plug from the end of the manifold and inserting an additional 1/4inch ball valve (as shown to right).

We do also supply the 1/4inch plugs if you want to to the opposite and convert a 4 or 6 way into a 3 or 5 way.

! NEW !

Part Number

007162 (1/4inch Ball Valve)

RET9460 (1/4inch Plug)

RET3741 (1/4inch Nipple)

RRP

$7.95

$3.50

$3.50

Page 36 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Sm ith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Carbonation Keg Lid with 2 Micron Diffusion Stone

Easiest way to carbonate your beer.

The keg lid with built-in carbonation stone! Move the lid from keg to keg to carbonate as needed. This lid allows fast force carbonation with the minimum of effort.

The lid comes with 60cm hose and stone already attached.

Features:

 Stainless Steel 0.5 Micron Diffusion Stone

Keg Lid with Stainless Ball Lock Post

 Silicon keg Lid seal

Assembled and ready to use

Part Number

00 6479

RRP

$49.95

Range of Silicon Bungs

These silicon bungs do not perish or leach chemicals or aromas like rubber bungs.

They are made with food grade silicon and can handle temperatures up to 180C. They also have excellent chemical resistance to a wide range of acid and alkaline cleaners and sanitisers.

Available Sizes (small diameter x large diameter):

 28mm x 34mm (30mm thick)

 44mm x 53mm (40mm thick)

 68mm x 82mm (41mm thick)

75mm x 91mm (41mm thick)

Part Number

006851 - 28mm x

34mm

006868 - 44mm x

53mm

006875 - 68mm x

82mm

006882 - 75mm x

91mm

RRP

$5.95

$6.45

$19.95

$19.95

Page 37 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Smith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Check Valves / One Way Gas Valve / Non Return Valve

Every keg setup should have one. This handly device will ensure you protect your regulator against reversal of flow in your lines. We have two types available. The white ones (shown in picture to left) come with brass barbs so that they will suit several different gas lines irrespective of the outside diameter (OD). These will also push straight into our gas line splitters.

We also sell an 8mm push in type (seen above in black) so that if you are using 8mm

OD gas line the line then it will push directly into the fitting without the need for any clamps.

Part Number

004789 (with brass barbs)

005991 (8mm push in type)

RRP

$9.95

$9.95

6mm Poly Joiners/Tees/Elbows

Part Number

005120 - Poly Tee

005137 - Poly Joiner

These poly fittings are made from food grade Poly

Ethylene making them an inexpensive way for you to join or split your gas or beer line.

Rated to 100psi

Will fit beer/gas line with 4mm, 5mm, and 6mm

ID

Made from food grade poly ethylene which will not taint your beer like other plastics.

RRP

$1.49

$1.49

Stainless Splicer / Tee / Joiners

These stainless fittings are machined from 304 stainless. The stainless ‘tee’ piece (right) is made to fit the 4 – 6mm

ID beer line. The stainless splicer (left) is perfect for attaching 4-6mm ID line to

10-13mm ID line.

! NEW !

Part Number

007681 – Tee (equal 6mm)

007698 – Splicer(6mm x 13mm)

Page 38 of 78

RRP

$2.95

$2.95

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Sm ith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

007704 – Joiner (6mm x 6mm)

007933 - Joiner (13mm x 13mm)

$2.95

$2.95

Page 39 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Smith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Keg Opening Tools

Photos above from left to right above:

Part #:004666 – D-type & S-type keg opening tool for

CUB, Fosters, Asahi, Heineken

Part #:004673 – A-type keg opening tool for Tooheys,

Coopers, XXXX type kegs.

Part #:006523 – Spear compression tool for circlip installation/removal

Part Number

004666

004673

006523

RRP

$49.95

$49.95

$299.00

New and Reconditioned Stainless Steel 50L

Kegs

10 YEARS WARRANTY

We sell second hand 50L kegs for $40 - $80 depending on the condition and type.

We also stock brand new kegs sold without the spear and sell the a-type and d-type screw in spears separately.

All new kegs are made to EURO standard and are made with stackable chimes. We now also offer 10 years warranty on the kegs (part 005755). All kegs are serial numbered and made to

Australian Standard (AS2971). Circlip type spears and can be made on request. Keg

Spears come with 12 months warranty.

Part Number

Second Hand Kegs

005755 -Brand New 50L Keg (no spear)

005762 - A-type Spear

005779 - D-type Spear

RRP

NA

$110.00

$22.00

$22.00

Page 40 of 78

NEW

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Sm ith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Screw in Keg Cap

These stainless steel keg caps are an alternative closure to a normal keg spear.

The keg cap is made from 304 stainless and can be removed and fitted by hand.

These are ideal if you are using the keg as a storage vessel for something other than beer or if you simply want an easier way to open and close the keg.

Part Number

D-type & S-type Keg Seal

RRP

$24.95

56L Insulated Mash Tun with

Stainless Ball Valve and

Stainless False Bottom

A great way to get into all grain brewing!

These coolers work very well as mash tuns, as you'll notice barely any temperature loss throughout your 1hr+ mash. Internal dimensions are approximately 38cm diameter x 50cm high. External dimensions are approximately 50cm diameter x 60cm high.

Comes with our stainless steel weldless spigot and our 12" stainless steel false bottom. Also includes silicon tubing and stainless 30cm false bottom.

Part Number RRP

007612 $199.95

Vortex - Aerate, Stir & Clean

NEW

The Vortex wand is a great multipurpose item that can be used for Aeration,

Cleaning or Stirring. The Vortex wand fits into your normal cordless drill chuck.

Using the power of your drill will save you time during simple brewing tasks.

The vortex is made from 304 grade stainless steel rod and Teflon (PTFE) paddles and spindle and includes 2 microfiber cleaning pads.

Aerate

: Healthy yeast growth starts with good levels of dissolved oxygen. Without a source of pure oxygen most home brewers resort to ordinary air to oxygenate their brew and the vortex aerating paddles will do a far better job that stirring with a spoon. Typically rotating at over 1000rpm the paddles will help the wort reach oxygen saturation point in no time at all.

Page 41 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Smith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Cleaning

: The Vortex includes 2 microfiber cleaning pads and stainless fasteners.

By attaching the pads to the aerating paddles you can turn the vortex into a powerful cleaning machine. Great for carboys or fermenters.

Part Number

007926

RRP

$29.95

Page 42 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Sm ith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

58 Litre Stainless Keggle

These brand keggles are made for the avid home brewer. The keggles are made from solid 304 stainless steel. The 1.5mm thick stainless is heavy enough to take some beating and also thick enough to be heated by direct fire (such as the LPG burner part #:

006653). The keggles are 41cm diameter and 59cm high with 33cm opening at the top.

The keggles include the ½” large bore 2 piece ball valve.

Other options can easily be fitted to the keggle such as:

1.

30cm domed false bottom for Mash Tun conversion

This will require parts:

.

2.

3.

Part #: 004598 – 30cm False Bottom

Part #: 005496 – Short piece of silicon tube

Pert #: 005717 – ½ Female x 13mm barb to fit inside of keggle

3” Bi-Metal Dial Thermometer

Requires part #: 005328

2200 Watt Element for HLT or electric kettle conversion

Requires part #: 004727

4.

Thermowell conversion

This just requires part #: 005311

Part Number

007018

RRP

$189.95

200L & 100L Stainless Steel Pot

These large 200litre and 100L stainless steel pots are suitable for home brewers or nano-breweries that want to build their own system.

The pots are made from 1mm thick 304 grade stainless steel.

The lids come with a silicon seal and secure with several stainless clamps for an airtight seal. The pots also are made with strong welded handles on the sides.

Due to the size of these pots it possible that the pots can get slight dings or dents in transit as they are often handled by forklift. As a result we do not guarantee the pots to be free of dents unless you pick them up from our distribution centre in Springvale.

Specifications: http://www.kegking.com.au/Downloads/200l%20Brewery%20Pot.pdf

http://www.kegking.com.au/Downloads/100l%20Brewery%20Pot.pdf

Part Number

007735 (200L Pot)

008008 (100L Pot)

NEW

! NEW !

RRP

$349.00

$334.00

Page 43 of 78

NEW

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Smith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Hop Spider

Perfect for containing hops while brewing beer and will prevent hops getting into your chiller or fermenter! The spider sits over the edge of your kettle or keggle (as show to right).

During the boil hops can be poured directly into the spider. The spider is suitable for up to

300grams of hops. The basket is 35cm high with the opening at the top being15cm diameter and tapers down to a 10cm diameter at the bottom. It’s completely made from 304 stainless and the mesh is 0.2mm aperture so it will capture 99% of the hop material while still allowing the hops to move in the kettle so you get good hop efficiency.

Part Number

008015

Unfortunately all second hand ball lock kegs

RRP

$34.95

have sold out. There is a worldwide shortage.

SOLD

OUT

Second Hand/Used Ball Lock Lock Kegs

These kegs are sold as is. They are tested and may contain some residual

We recommend that you change the when you purchase these. The keg are Part#004857. Some of the kegs pressure syrup. o-rings seal kits with ring pull pressure relief and some the auto pressure relief. kegs use the ball lock disconnects (Part

004833,004840,005267,005274). come only have

These second hand kegs are 21cm Diameter and 64cm high. These numbers

Second Hand 19L Pin Lock Kegs

These kegs us pin lock disconnects (Part no: 5366/5373). slightly larger in diameter (22.6cm) and slightly shorter than regular Cornelius type ball lock kegs. The pin lock not come with the pressure release valve with ring pull, with a relieve valve which simply pops out at approx. 100 relief pressure manually you can push down the poppet post.

Part Number

004802 – 19L Second Hand Ball Lock

Keg

005502 – Replacement Keg Lid with

PRV & Silicon O-ring

005847 – 19L Used Pin Lock Keg

They are

(58cm) kegs do they come psi. To on the gas

RRP

$69.95

$19.95

$59.95

Page 44 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Sm ith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Page 45 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Smith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Economy New Ball Lock Kegs

These new kegs are sold in 2 different sizes:

- 9.5 Litre (21cm Diameter x 34cm High)

- 19Litre

(21cm Diameter x 62cm High)

Part Number

004819 – 19L Keg Brand New

004864 – 9.5L Party Keg Brand New

Premium New 19L Ball Lock Kegs

5 YEAR WARRANTY

PRICE

CHANGE

These premium brand new kegs are rated to 130psi working pressure and are made using the robotic orbital welding machine. The finish on these kegs are far superior to our other economy stainless steel kegs and are made with super smooth weld making them sanitary and easier to clean.

The black rubber on these kegs also make them a little nicer to use around your house as they are less likely to damage your tile floors or crack plastic lining inside your kegerator.

The two sizes available are the 9.5L (2.5gallon) with a stainless handle or the 19L (5 gallon) size with rubber handles.

Part Number

007322 (9.5L with rubber base+SS handle)

007339 (19L with rubber base and handle)

RRP

$99.00

$99.00

RRP

$109.95

$119.95

Page 46 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Sm ith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Neoprene Keg Parka / Jacket

Made of durable neoprene, these keg parkas will keep your beer cold for hours without the need for a bucket of ice. We have two sizes. The larger size will fit straight over any 19L keg and the smaller size will fit any 9L keg. They will fit any kegs that are between 20-24cm in diameter.

Our new black 19L keg parkas are now 3 times thicker for superior insulating performance.

Perfect for parties or picnics, or anytime the keg is out of the fridge as it will help to maintain a cold temp in your keg for hours. Put a couple ice packs in between the keg and jacket and it will be even colder.

Part Number

005946 – Parka for 19L Kegs (Super Thick)

005953 – Parka for 9L Kegs (Blue)

RRP

$24.95

$19.95

Cornelius Keg Spare Parts and Disconnects

(Compatible with new we sell) and second hand kegs that

Part Number

004833 – Grey Ball Lock Disconnect Barb

004840 – Black Ball Lock Disconnect Barb

005267- Grey Ball Lock Disconnect MFL

Thread

005274 – Black Ball Lock Discnnct MFL Thread

005281 - Nut & Barb-MFL Disconnect

005366 - Grey Pin Lock Disconnect Barb

005373 - Black Pin Lock Disconnect Barb

005977 – Gas Pin Lock Disconnect MFL Thread

005984 - Liquid Pin Lock Disconnect MFL

Thread

005212 – Cornelius Type Gas Post

005229 – Cornelius Type Liquid Post

005250 – Silicon Hatch/Lid O-ring

006417 - Cornelius Keg Lid Pressure Relief

Valve

006820 – Keg Lid Foot

Part Number

005236 – Post O-ring

005243 – Dip Tube O-ring

004826 - Poppet

Page 47 of 78

RRP

$6.95

$6.95

$6.95

$6.95

$4.95

$9.95

$9.95

$9.95

$9.95

$5.95

$5.95

$4.95

$3.95

$1.49

RRP

$0.29

$0.29

$1.49

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Smith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Stainless Steel Ball Lock Disconnects

These 304 grade stainless steel ball lock disconnects are exceptional quality and extremely reliable and robust.

NEW

They are suitable for commercial applications or home brewers.

5 YEAR WARRANTY

Part Number

007773 – Stainless Gas Disconnect Barb

007780 – Stainless Liquid Disconnect Barb

007797- Stainless Gas Disconnect MFL

Thread

007803 – Stainless Liquid Disconnect MFL

Thread

RRP

$16.95

$16.95

$16.95

$16.95

Tube Brush

These brushes are 8mm diameter and 80cm long so you can feed them into small diameter tube to clean it out.

Part Number

007940

NEW

RRP

$9.95

Page 48 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Sm ith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Adjustable Pressure Relief Valve with

Gauge

Relieves pressure while filtering from one keg to another or allows you to accurately naturally condition in the keg by setting the desired venting pressure. Adjustable up to

100kPa (15psi).

Notes: You need to wind/unwind the end of the valve to adjust the pressure. The grey ball lock disconnect is sold separately (part#5267) or you can also use pin lock disconnect (part#5977).

Part Number

007315

RRP

$29.95

Ball Lock Post with 1/4inch bulkhead assembly

These ball lock post include a 1/4inch BSPP thread so you can attach it to a wide range of other fittings. The posts include a 20mm long thread, an o-ring, poppet, locking nut and short dip tube. Longer dip tubes can be purchase separately

(part#6097). This would enable you to make a keg out of any pressure vessel if you wanted to. The assembly can also be fitted to regulators, gas manifolds and various other items (as shown in pictures above).

Part Number

007070 - Liquid

007087 - Gas

RRP

$19.95

$19.95

Page 49 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Smith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Keg CO2 Charger Kit

This keg charger kit is just what you need to charge your keg on the run. Small enough to fit into your palm making it the first choice for your portable keg setup. Simply screw on the MFL threaded disconnect (part 5267 or 5977), attach to your keg, and press the trigger to charge the keg. The kit includes 1 x 16gram

CO2 cartridge. Replacement CO2 cartridges can also be purchased.

Part Number

005908 – Keg Charger Kit +

Cartridge

Part Number

005939 – Spare 16gram Cartridge

Premium Regulated CO2 Charger

Unlike the cheaper charger kits made from plastic this little charger kit is made from machined anodised aluminium. The charger kit is very compact but is just large enough to house a very small regulator. No need to worry about pressing the trigger on the charger too much or too little, just use the regulator to set the pressure and forget.

Simply screw on the MFL threaded disconnect (part

5267 or 5977), attach to your keg, and set the dispense pressure.

Photo to right: Kit does not include disconnect or

16g cartridge. These have to be purchased separately

(part# 5939)

Part Number

006844

RRP

$19.95

RRP

$2.10

RRP

$49.95

MFL Tap Shank Adaptor

The MFL Shank Adaptor (photo to right) is what you need to connect your draft tap directly to your MFL disconnect (will work with both ball lock and pick lock disconnects). Suitable for tap models

004079, 005533, and 006332.

Part Number

005731

These allow you to make a very compact portable setup as shown in photo to the left.

RRP

$14.95

Page 50 of 78

NEW

Keg King

FREE SHIPPING – For retail

www.kegking.com.au

The Keg D ispense Specialists

orders over $200 to capital cities

2/33-35 Sm ith Rd

Springvale, VIC, 3171

NEW LOW PRICE

MaltMuncher Grain Mill (2

Roller and 3 Roller Designs)

The MaltMuncher Grain Mill is constructed using materials that will last a lifetime. Cold rolled steel for the rollers, 6061 Aluminum body and hopper and oil impregnated brass bushings.

We now stock these in a 2 roller and 3 roller design. The 3 roller design has the main advantage that it draws the grain better gives and improved throughput.

FEATURES

:

NEW

*

Includes, hopper and crank handle

Width and roller diameter is optimized for use with power

* Adjustable rollers at both ends

* drill to give uniform crush * 12

TPI knurl to efficiently pull grain through rollers while leaving hull intact to form an excellent filter bed for sparging

Part Number

005441 (2 Roller)

RRP

$135.00

007421 (3 Roller) $199.00

High Torque Motor (for Maltmuncher) Kit

This 1amp, 240v motor has been coupled with a high torque (1:7.5ratio) gearbox to bring the RPM down to the perfect milling speed of 180rpm.

This motor is made to be direct drive and will couple with the mill using the included spider coupling with polyurethane cushion.

The motor mounting plate and spider coupling make it easy for you to mount the motor and mill together.

The cast alloy motor housing and mounting bracket are robust and quality made.

The housing is sealed and practically maintenance free. The mill motor kit also includes a kill switch for your safety.

Page 51 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Smith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Part Number

007414

RRP

$199.00

Page 52 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Sm ith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

The Keggomax CM Reflux Still

The Kegomax Reflux Still is easily one of the best Coolant

Management (CM) reflux stills available today. It’s a professional grade still that produces exceptional spirit with a high level of purity (up to 95% ethanol).

Features:

NOW ALSO FITS OUR

Achieve 95% Alcohol

Fully stainless steel design

TURBO BOILER TOO

Able to be use with large 50L Keg Boiler

Huge reflux column means high purity spirit

Superior design and exceptional performance

Copper packing to release sulphides

Includes:

 Now also includes all mounting hardware to fit the still to a

50L Keg boiler or our 35L turbo boiler

Thermometer

Stainless steel and copper packing

 Digital thermometer with bung

Part Number

004680 Reflux still

RRP

$299.00

The Keggomax FM Reflux Still

(Patent Pending)

The Kegomax FM Reflux Still is an all new reflux still design that is made from borosilicate laboratory grade glass, stainless steel and copper. The still is able to produce extremely high grade neutral ethanol and is extremely easy to operate. It can also be automated using one of our pre-wired temp controller boxes

(part#004239 or part#004246). The reflux still has been designed so that it can be used with the boiler below.

If you choose to make your own boiler the still can be easily attached to a 50L keg using the tri-clover clamp (part#006493) and the keg fitted with an element (part#004727).

The reflux still includes:

Digital thermometer

 Copper Condenser

Stainless universal coupling to connect to Turbo Boiler or the top of a commercial 50L keg.

13mm Barbs to attach regular garden hose to the copper condenser.

Part Number

Page 53 of 78

RRP

005069

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Smith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

$219.95

Page 54 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Sm ith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

The Keg Boiler

These 50L Keg Boilers are made from commercial grade 316 stainless steel. They are ideal for people wanting to take advantage of the efficiencies related to distilling on a large scale.

The Keg Boilers are made from second hand 50L kegs. The keg vary in type shape and condition.

Features:

Part Number

004710

 Commercial grade 316 stainless steel

50L Capacity

Includes:

2200 watt element

Power cord

RRP

$329.00

Turbo Boiler - 2000watt

The turbo boiler is a great way to boil your wash for distillation and can also be used for boiling water or wort for beer making. The boiler comes standard with a 47mm hole to suit the “Still Spirits” stills (such as the T500) and to suit our

Keggomax FM reflux still. We also can provide separately lids with no hole, or lids with 60mm hole to suit the Pure

Distilling stills.

Features

 Concealed element for easy cleaning

 Boil dry protection

 Large 25L capacity

 Made from stainless steel

Handy Tap

Solid Lid with Silicon Seal

Part Number

005113

RRP

$199.95

Page 55 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Smith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

2200 Watt Stainless Steel Heating Element

These heating elements are powerful and perfect to make use on your boiler. The element is made from 304 grade stainless steel. This element also has a weld free design meaning that you can easily install it by simply drilling a hole in your pot/keg/boiler of approximately 32mm and tightening a nut from the outside of the pot. The diameter of the element at the widest point is 38mm so it is ideal if you need to pass the element through the neck of a keg to make a keg boiler.

This element also works extremely well with our heat sticks (part number #006226) if you are planning on making a RIMS recirculating system.

Features:

Powerful 2200 Watt

 thread:32mm (M32 – Metric 32mm), flange:40mm, length element only:290mm, diameter: 25mm

 Food grade silicone seal

The element also come with a food grade high temperature silicone seal and a power cord is sold separately.

Part Number

004727 Element

004734 Power

Cord

RRP

$44.95

$7.95

RIMS Heat Stick Heat Exchanger Housing

This heat stick housings make is very easy to build a RIMS recirculating mash system. They have been made with TIG welded

50mm stainless pipe with 2 x ½” BSP female sockets at right angles in the top and bottom for the wort to flow in and out. On one end there is a tri-clover end cap with a 32m hole pre-drilled so it is ready to mount one of our 2200watt elements (part #004727). The top of the heat stick has a 20mm hole so it is ready to mount either a thermowell (part

#005311) or bulkhead (part #005335).

This makes it very easy to then use a temp controller (part#004246) and pump (part#005861) to build your own re-circulating RIMS system.

Features:

* Solid TIG welded from 304 stainless

* Silicon beaded seal

* Easy to disassemble with tri-clover clamp

Part Number

006226

RRP

$249.95

Page 56 of 78

PRICE

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Sm ith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Stainless Steel Male/Female Quick Disconnects

These male quick disconnect couple with the stainless female quick disconnects below. They come in three different types from left to right.

Left: 1/2” BSP Male Thread (005625)

Middle: 13mm Barb (005632)

Right: 8mm Barb (005649)

Female quick disconnects come in three different types from left to right:

Left: 13mm Barb (005588)

Middle: ½” BSP Male Thread (005601)

Right: ½ BSP Female Thread (005595)

005625

005632

005649

005588

005601

005595

005717

005700

005724

005670

005663

005656

006233

005618

Stainless Steel Barbed Fittings

Stainless steel barbs

Left: ½” BSP Female x 13mm Barb (005717)

Right: ½”BSP Male x 13mm Barb (005700)

Other Stainless Parts

From

Left

To

Right:

Stainless Nut ½” BSP (005724)

Stainless Elbow Bend ½” BSP

(005670)

Stainless Pipe with Internal ½” BSP Thread - 33mm Long (005663)

Stainless Pipe with External ½” BSP Thread - 35mm Long (005656)

Stainless Tee with Internal ½” BSP Thread (006233)

Ball Valve ½” BSP Large 14mm Bore (005618)

Part Number RRP

$5.95

$5.95

$5.95

$9.95

$9.95

$9.95

$4.95

$4.95

$2.95

$4.95

$4.45

$4.95

$4.95

$15.95

Page 57 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Smith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Page 58 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Sm ith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Silicon and Stainless ½” BSP Washers

These washers are compatible with any ½” BSP plumbing hardware. They come in silicon for sealing things and stainless.

Silicon: 21mm(ID) x31mm(OD) x 2mm (thickness)

Part Number

005885 (Stainless)

005892 (Silicon)

Stainless: 21mm(ID) x33mm(OD) x 3mm (thickness)

RRP

$1.95

$0.95

½” BSP Stainless Ball Valve Assembly (to port pot/keg)

This ball valve is sold as a complete assembly (shown in picture on left ) so all you have to do is drill your 20mm hole in your keg, pot or vessel wall and you can fit this ball valve.

This is a full port ball valve with a 14mm bore which allows maximum flow rate through the ball valve.

The valve comes with Teflon tape already on the nipple, a silicon o-ring which is seated in the ½” BSP nut. The seat in the nut prevents the o-ring from rolling out of place when tightening. As shown to top right the 1/2”

BSP Male x 13mm Barb (#005700) can be fitted to the ball valve (purchased separately) so you can attach any 11-14mm ID type hose

(such as our silicon hose #005496).

On the inside of the vessel the ½” BSP nipple usually protrudes approximately 16mm meaning you can attach an elbow (purchase separately #5670) to the inside of the vessel so it draws from the bottom (as shown to the right).

YouTube Link on Installing this product: http://youtu.be/-5-_v_z-dfg

YouTube Link regarding making a ball valve assembly: http://youtu.be/_Uqs9jw61VY

Part Number

005748

RRP

$24.95

Page 59 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Smith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Stainless Steel Camlock Fittings

! NEW !

Part:007629 - Type D

Female x ½” Female

Part:007636 - Type B

Female x ½” Male

Part:007643 - Type C

Female x 13mm Barb

Part:007650 - Type A

Male x ½” Female

Part: 007667 - Type F

Male x ½” Male

Stainless Steel

 150psi/11Bar Operating Pressure

Part Number

007629

007636

007643

007650

007667

007674

Part: 007674 - Type E

Male x 13mm Barb

RRP

$7.45

$7.45

$7.45

$5.45

$5.45

$5.45

Page 60 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Sm ith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Portable Refractometer with ATC

This refractometer is used to measure the density of your beer or wine. Many brewers prefer to use this instead of a hydrometer because they find it quicker and easier to get an accurate reading.

This model comes with ATC (Automatic

Temperature Compensation)

Wine: Measure the brix level (sugar level) in your grapes with just one drop! The perfect vineyard tool for monitoring ripening grapes. Use them after the crush to get an exact brix reading.

Features:

 0-30 brix scale

 0-1.120 specific gravity scale

Metal body with rubberised grip

Adjustable focus eyepiece with rubber grip

ATC (Automatic Temperature Compensation) Allowing you to use the refractometer between 10 – 30 degrees Celsius so the temperature of the sample is irrelevant.

NOTE: This tool is used to measure unfermented wort. Once alcohol is present in the wort, the use of a correction table is advised.

Part Number

004222

RRP

$44.95

Page 61 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Smith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

12inch/30cm Stainless Hop Bazooka Screen

These 304 Grade Stainless Steel 16

Mesh filter screens are ideal as a filter in your mash tun or brewing kettle. The

30cm length is long enough to fit it your keg, keggle (Part#7018), or pot.

NEW

The 1/2inch BSPT thread fits with the large range of other accessories that we sell.

Part Number

007438

RRP

$8.95

Silicon Hose / Tubing

This silicon hose is resistant to constant high temperatures and has excellent chemical resistance.

The soft silicon is great for transferring beer from fermenter to keg and will fit onto the standard fermenter tap or standard 13mm hose barbs. The soft silicon easy to work with and seals very well. It is also recommended for handling spirits and for distillation applications as it does not leach plasticisers like vinyl tubing.

Internal diameter is 11.5mm and outside diameter of 18mm. Please note that this hose should not be used for higher pressures above 20psi (such as mains water pressure). The hose has a burst pressure of approximately 35psi.

Part Number

005496 (per meter)

RRP

$4.95

25mm Screw Type Hose Clamp

This screw type hose claps are often used in laboratory equipment to shut off or control the flow of liquid through flexible hose. For beer brewing they are fantastic for adjusting the flow of wort in your mashing system or fly sparging. The 25mm size is suitable to use with the silicon hose (#5496). No need to cut your hose or feed the hose through the clamp. The gate on one side of the clamp swings opens and you can place the clamp over any part of the hose.

Part Number

006622 (25mm)

RRP

$5.95

Page 62 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Hardwood Mash Paddle

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Sm ith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

NEW LOW PRICE

Made from New Zealand hardwood these mash paddles are what you need to ensure you never get dough balls in your mash again. The perfect gift for any mash brewer or yourself.

Part Number

005830

RRP

$49.95

Stainless Steel Mash Paddle

These stainless steel mash paddles are tig welded together from 304 stainless. They are very robust and suitable for stirring large mash batches. The paddle will ensure you never get dough balls in your mash again. The perfect gift for any mash brewer or yourself.

The paddle is 73cm in length with a paddle head with dimensions of 26cm x 14cm.

Part Number

006691

RRP

$49.95

Page 63 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Smith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

MKII - High Temperature Magnetic Drive

Polysulfone Pump

Voltage

: 220-240 at 50-60hz

Max Head

: 3.4m

Max Flow

: 19L/min

Wiring

: Now includes Australian power socket

Fittings

: ½”BSP

This pump is constructed of food-grade materials, handles boiling wort. The impeller housing is made from polysulfone because it is a tough, food-grade plastic rated up to

120C.

The magnetic drive acts as a clutch allowing the user to put backpressure on the pump to slow down flow. Since it is magnetic drive, it’s not self priming, you must put the pump under the level of the liquid source. This is an extremely efficient

1.1amp pump which can be run continuously at elevated temperatures.

The magnetic drive ensures no lubricated bearings are in contact with the liquid at all, so you can be sure there is no chance of any contamination of the liquid being pumped, which is why this pump is ideal for home brewing.

Part Number

006806 (1/2” BSP)

RRP

$69.95

High Temperature Micro 12v Direct Drive Brown Pump

Voltage

: 9-14V (higher performance at higher voltage)

Max Head

: 3.2 meters (at 12v)

Max Flow

: 7.2L/min (at 12v)

Wiring

: Not wired

Threads

: Threads are standard ½” BSP

These economical little pump is made from food grade fibre reinforced plastic and is rated up to 105C. It very compact in size measuring 92mm x 64mm x 45mm.

The 12v power requirement means that they are safe to wire yourself. They only draw 0.65amps and have high flow rate for such a small pump. A good option for small brewers looking for an inexpensive way to build a recirculating system. The axle is also lubricant free so there is virtually no maintenance or lubricant to get into your beer.

Part Number

006356

RRP

$23.95

Page 64 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Sm ith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Wort Aerator - Air Pump Only

This aeration pump is designed to work with the 2 micron sintered stainless stone. The output side of the pump fits our 4mm ID beer line. Lack of aeration is often the reason for sluggish fermentation or poor attenuation.

Good aeration can be achieved using this pump and will greatly increase the health of your yeast especially in their aerobic stage. Simply plug pump into your wall and put the stainless air stone into your fermenter for 15 min. To clean and sterilise the air stone simply put in boiling water and store in clip lock bag.

Part Number RRP

005922 $19.95

Wort Aerator - Air Pump Kit

This aeration kit includes the air pump, sintered

Part Number

005915 stainless stone, and the 0.20 micron autoclavable air filter. This complete assembly will ensure that you get the best possible aeration in your wort which will lead to faster fermentation, better attenuation and healthier yeast in general. The included 0.20 micron air filter will also ensure that the air that you put into your wort is pure and free from any bacteria.

Simply dip the air stone into your fermenter and let it bubble in your fermenter for 30 minutes.

RRP

$59.95

0.2 Micron Air Filter

These 0.2 Micron Air Filters will filter out microbes and bacteria. They can be used in many different ways.

They can be used with our wort aerator pumps (above) so you can aerate your wort, or can be used as an airlock in the top of your fermenter. They can also be used to filter air going back into a cask when dispensing real ale.

This filter is not suitable for liquids and should be discarded if it gets wet.

Part Number

006721

RRP

$5.95

Page 65 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Smith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Borosilicate Erlenmeyer Flasks

The best brewers make large yeast starters to get their beer fermenting fast. Large populations of active yeast help ensure flavorful beer free of off flavors.

Erlenmeyer flasks are made from borosilicate so you can move directly from gas stove top to ice bath for cooling without it cracking. This reduces the risk of contamination when transferring from one container to another.

NOTE

: It is not recommended to use directly on electric heating element. Only use gas. Warranty on this product does not include breakage if you break the product.

Part Number RRP

006158 (1000ml)

006370 (3000ml)

006165 (5000ml)

$9.95

$24.95

$39.95

Reagent Bottles & Measuring Cylinders

These Reagent Bottles (left) and Measuring Cylinders (right) are made from the same laboritory borosilicate as our Erlenmeyer Flasks. These

500ml & 1000ml Regent Bottles are ideal for the boiling and storage of wort for your starter. Simply place in microwave to sterilise wort then cap and put in fridge until you need to make your starter. The whole bottle can be autoclaved. The measuring cylinders have volume of 250ml with

2ml graduations for accurate measurements.

Part Number

006387 (500ml bottle)

RET3918 (1000ml bottle)

006394 (measuring cylinder)

Auto Easy Syphon 65cm

These syphons are an easy way to transfer your wort from one vessel to another. They are easy to use and come apart for cleaning. Simply pump the handle a couple time to start the syphon. The syphon includes about 1 meter of vinyl tube and a sediment reducing tip.

!NEW!

Part Number RRP

RRP

$4.95

$8.95

$9.95

Page 66 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Sm ith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

006813 (65cm) $19.95

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Smith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Pivoting Magnetic Stir Bar & Neodymium Rare Earth

Magnets

These 28mm magnetic stir bars (part #006240) are suited to use with the above conical flask. If you would like to make your own stir plate you can use use a small computer fan and the neodymium magnets (part#6257) to make a magnetic stirrer. Alternatively if you prefer to purchase a professional laboratory adjustable magnetic stirrir these are available below (part#6714 ). Using a magnetic stirer is easy and will optimise the growth of your yeast starter in the conical erlenmeyer flasks.

These button magnets are neodymium with high level of magnetic flux. They are 8mm diameter and 6mm thick.

RRP

$4.95

$2.95

Part Number

006240 (stir bar)

006257 (button magnet)

Adjustable Magnetic Stirrer Machine

This adjustable magnetic stirrer is ideally used with the stir bar above (part#4240). Simply plate your yeast propigation flask ontop of the stir plate and drop in the stir bar. Switch on the machine and adjust the spin speed.

Page 67 of 78

Part Number

006714

RRP

$79.95

Page 68 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Sm ith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Phosphoric Acid Blend Sanitiser

This sanitiser is completely food grade and non-rinse. The formulation is highly concentrated and will make over 300Litres when diluted. You can also re-use the sanitiser over and over again making it even more cost effective.

The phosphoric acid blend provides a unique killing system, unafected by organic soils and delivering a low foaming formulation with optimum coverage and penetration. The formulation is made to impart no off-odors or flavours. Unlike other sanitisers it is non-staining, non-corrosive on stainless and stable over a wide range of teperatures.

This sanitiser comes packaged in a convenient 2 chamber mixer container so you can easily measure the required amout simply by squeezing the bottle.

Part Number

005519 (300ml)

006202 (20L Cube)

RRP

$9.95

$199.95

100% Pure Sodium Percarbonate (400grams)

Sodium percarbonate is 100% active ingredient so it is pretty powerful stuff. Sodium percarbonate uses active oxygen to penetrate carbon or protein soils and has a high kill rate on wide range of micro-organisms making it an effective sanitiser as well as cleaner.

This is a fantastic product for use on all brewery equpment including beer lines, pots, fermenters, heat exchangers. It will effectively remove beer stone & dried up yeast.

Sodium percarbonate it gradually decomposes into not-toxic, environmentaly safe, food grade elements. It decomposes into oxygen, sodium carbonate & water.

Part Number

006172 (400gram Jar)

006141 (1kg bag)

RRP

$6.95

$9.95

Caustic Soda (Sodium Hydroxide) – 1kg Bag

A cleaner that is fairly dangerious to use but still the first choice for many wineries and breweries. It’s ability to dissolve and remove a wide range soils, oil, grease and stains makes it a good choice when other cleaners are not effective. Safe to be used on stainless but some other soft metals will disolve when using this stuff. Use with caution. When used in combination with sodium percarbonate(hydrogen peroxide) the combined cleaning effect is extremly effective.

Part Number

006288

RRP

$4.95

Page 69 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Smith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Tungsten Carbide Tipped (TCT) Hole Saws (25mm Deep)

These Tungsten Carbide Tipped (TCT) Holesaws are the ideal solution to your metal cutting needs. Designed for steel and stainless steel. For drilling stainless there is simply no alternative to TCT holesaws. We have 3 different sizes. They can also drill through wood, plastic, steel and many other materials. These are sold as full assembly so no arbour is needed.

The handy spring built into the holesaw pilot ejects the core after drilling.

NOTE: To extend the life of the holesaw it is important to use cutting lubricant or WD-

40 while drilling. For maximum holesaw life use under 300 RPM when drilling stainless steel or steel.

Part Number

006110 (20mm diameter)

006127 (22mm diameter)

006134 (32mm diameter)

RRP

$9.95

$9.95

$16.95

Page 70 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Sm ith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Icemaster 225 – Ice Bank / Glycol /

Temprite Cooler

The Icemaster 225 is a commercial grade icebank cooler that is extremly compact yet offers high performance for small to medium volume customers. This unit is ideally suited to small bars, cafés, and restaurants. The unit can also be converted to a glyc

* Impeller + pump

* 4 stainless product lines ( 4 x 10meters x 8mm OD x 7mm ID)

* Powder coated finish

Specifications

Size:

Ice Bank capacity:

Refrigerant:

Coils:

410mm x 410mm x 685mm

22.5kg (40L coolant tank) r134a (280g)

4x11meter (8mmIDx7mmOD) 304 Stainless

Weight (full/empty): 55kg/15kg

Capacity: 60L in first hr @ 20C

Pump:

Power:

30L/Min (maximum head of 7 meters)

240v, 260 Watts

Part Number

006219

RRP

$849.00

100 Strip PH Test Kits

Full Range PH 0 to PH 14

&

Narrow Range PH 3.8 to

PH 5.4

No more calibration or spilling buffer solution. The handy test strips just dip straight into your samble and wait 10 seconds for the colour change. Easy, reliable and fast indication of PH.

The narrow range test kit is specifically chosen for beer brewing with a ph range between 3.8 and 5.4 so you can more accurately determin mash ph.

Part Number

006585 – PH0 – PH14

006837 – PH3.8 – PH5.4

RRP

$9.95

$6.95

Page 71 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Smith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

FreedomOne+™ Sodastream Adapter Hose - 36” and 72”

This handy hose attachment will allow you to connect one of our 2.6kg or 6kg CO2 cylinders to your sodastream machine. This adapter also includes a handy pressure guage so you can see how much pressure is left in yor CO2 cylinder.

With the FreedomOne Adapter you can enjoy a seemingly endless supply of soda and a fraction of the cost of your regular Soda Stream CO2 refills.

YouTube Link on how to use this product: http://youtu.be/H2luBUeYc4E

Part Number

RET9637 (36 Inch)

RRP

$89.95

RET9446 (72 Inch) $109.95

Sparkeltap – Continuous Chilled Sparkling/Still

Water

What a fantastic convenience. Chilled sparkling and still water at a fraction of the cost of bottled water or bottled sparkling water. Enjoy chilled sparkling water without the hassle of lugging heavy bottles home from the supermarket. Now anyone can enjoy this simple pleasure at the pull of a tap.

If you like carbonated water then you will lover the sparkeltap. The

Sparkeltap an undercounter water carbonator and chiller.

The reliable and compact unit will supply endless chilled sparkling water to your office, restaurant, home or bar.

Download the Sparkeltap Info Sheet by Clicking Here

Specifications:

Includes dual tap font with soda line and chilled water line, undercounter chiller and carbonation unit, gas line, 1/2”

BSP water splitter and other necessary hoses.

 Chills soda and still water down to 2C

Can chill and carbonate up to 20L per hour

 Undercounter unit: 24cm Wide x 31cm Deep x 42cm High

Part Number

006899

Page 72 of 78

RRP

$1199.00

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Sm ith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

28g Haynes Lubri-Film Plus – Food Grade Lubricant

Haynes Lubri-Film Plus is a heavy duty sanitary lubricant with extended performance, low friction properties. This lubricant is NSF rated and FDA approved for food contact.

The lubricant minimises downtime, extends the life of moving parts and will not dry or gum on equipment. It cleans off equipment easily.

Specifications:

 Odour and taste free, beer safe

 Sanitary

 Non-toxic

Food grade

Will not effect beer head retention

Part Number

006905

RRP

$3.95

Stainless Butterfly and Wire Hose Clamps

Butterfly Clamp

Butterfly worm style hose clamps (shown to left) come with a tab on them making it easy to tighten and loosen the clamp by hand.

We supply the 14-25mm size. Multiple clamps can be attached together end-to-end if larger diameter is required.

Wire Hose Clamps

In some circumstances wire hose clamps are preferable over worm style hose clamps as they do not pinch the hose like worm clamps do.

There are three different sizes of wire clamps available:

9-12mm

11-14mm

15-18.5mm

Part Number

RET1464 (9-12mm wire clamp)

RET4212 (11-14mm wire clamp)

RET4229 (15-18.5mm wire clamp)

RRP

$1.45

$1.45

$1.45

006929 (14-25mm butterfly hose clamp) $0.95

Page 73 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Smith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Universal Silicon Faucet Tap Spout Plug

These unique silicon faucet plugs are a universal size so they suit any tap fauce of diameters 10mm up to 17mm.

The plug is an economical solution for controlling fruit flies, yeast and bacteria bulidup when the faucet is not in use.

The silicon compound is resistant to caustic and acid based cleaners as well as high temperature so it is dishwasher safe.

Features:

Food grade silicon

 Fits all Keg King taps, pluto guns, fermenter taps, and many other tap designs

Part Number

006912

RRP

$2.45

Faucet / Tap Spout Brush Cap

Keep your tap clean for better tasting beer.

It’s easy to use and will prevent protein and mineral deposits from building up in your tap.

The bruch can also push right up into the

Part Number

007711 faucet and be used as a plug to prevent fruit flies getting into the tap spout.

NEW

RRP

$3.45

Page 74 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Sm ith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

The ULTIMATE Growler – 2Litre

This growler is made from 304grade stainless steel that is completely impervious to oxygen or sunlight (UV) meaning your precious amber liquid is in the absolute best storage container possible.

Vacuum Wall Insulated

Unlike other growlers this growler comes with double wall vacuum insulation to give you insulation like no other growler. So forget taking the esky, this baby will stay cold for hours.

Sprung Wire Lid for Best Pressure Holding Capacity

Most screw cap growlers struggle to hold the pressure required to keep beer fresh and carbonated. The ULTIMATE Growler comes with spring wire lid capable of holding up to 40psi.

NEW!

NOW

AVAILABLE

RRP

$29.95

Part Number

006936

Growler Drafto Kit

Drafto is a freaking awesome addition to your existing Ultimate Growler.

If you really love your beer you will dispence it using the Drafto Kit. No more growlers going flat. This Drafto kit keeps your beer fresh for months just like it’s poured straight from the keg.

Simple remove the cap from your

Ultimate growler and replace with the

Drafto Kit and dispence fresh beer every time.

NOTE: CO2 charger and cartridge not included. We recommend use of this product with the part #006844

Part Number

007469

COMING

SOON

RRP

$19.95

Page 75 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Smith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Alcometers & Hydrometers

These alcometers and hydrometers are calibrated at 20C. The glass alcometer/hydrometer comes in a cylinderical transparent tube that you can use to take samples and float the alcometer/hydrometer in.

The alcometers can acurately measure alcohol water mixture from 0% up to 100%

The hydrometers are made with a 3 scales and have a specific gravity range from

0.80-1.115

Part Number

RET0580 – Alcometer (0-100%)

RRP

$7.95

RET0597 – Hydrometer (3 Scale) $7.95

CIP Spinning Spray Ball (POM/Acetyl)

Part Number

007056

A CIP (clean in place) spray ball for cleaning and sanitising can make cleaning your brewery as easy as turning on a switch. Simply recirculate your sanitiser or cleaner using a pump an this sprayer will coat the inside of your tank in a 360 degree pattern so all surfaces are wetted. It is made with a ½” BSP thread so it will fit to a wide range of our stainless fittings. In order to get to the optimum pressures to spin the head a descent garden style pump should be used.

Typically this ball will work best with flow and pressure of 15-20L/min flow rate at about 200kPa

(30psi).

RRP

$49.95

Page 76 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

3 Vessel Recirculating HERMS Brewery Kit

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Sm ith Rd

Springvale, VIC, 3171

NEW

This three vessel brewery kit comes with:

3 x 7018 – 58L Keggles

1 x 4727 – 2200 Watt Element

1 x 6707 - 14m Immersion Chiller

1 x 5328 - Bi-Metal Weldless Thermometer

1 x 6806 - Magnetic Driver Pump

1 x 4246 – Temp Controller

3 x 5496 – Silicon Tube

1 x 5311 – Stainless Thermowell

1 x 4659 – High Pressure LPG Reg

1 x 6653 – High Pressure 3 Leg Burner

6 x 5588 – Female Quick Disconnect

7 x 5625 – Male Quick Disconnect

2 x 5663 – Pipe Nipple

1 x 4598 – 30cm Falce Bottom

1 x 5670 – Elbow Bend

1 x 5748 – Ball Valve Assembly

1 x 5717 – Stainless Barb

Normal Cost = $1360.35

Cost purchased unassembled $1099.00

Cost including assembly $1299.00

Assembly

If you choose to assembl this yourself you will need a 20mm hole saw, 32mm hole saw, file, spanner and some feflon tape. If you assembly yourself the price is $200 cheaper but you will have to drill the holes yourself.

You will also need:

Your own BBQ gas cylinder

A stainless bench (this was $150 from bunnings as shown in photo)

Some screws to mount the pump and temp controller to the bench

Some plumbing fittings to connect garden hose to the wort chiller (available at

Bunnings)

Brief Introduction

This system is designed with 3 x 58L keggles so you can brew a batch of beer that is up to 50L in size. The 3 keggles are:

1.

HLT (hot liquor tank)

- Includes 2200 watt heating element which is controlled using the 16amp temp controller. Includes ball valve and thermowell .

2.

Mash Tun

- with 30cm false bottom, ball valve and 3” temperature dial.

3.

Kettle

– Includes stainless ball valve

Step 1 – Preheat HLT

Preheat water in HLT (approximately 75-80C).

Step 2 – Mash

Use water from mash tun to begin mash. Stir mash thoroughly.

Page 77 of 78

FREE SHIPPING – For retail orders over $200 to capital cities

Keg King

www.kegking.com.au

The Keg D ispense Specialists

2/33-35 Smith Rd

Springvale, VIC, 3171

Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

Step 3 – Recirculate Mash/Step Mash

Use the pump to recirculate the wort through the 14 immersion chiller (which you can sit in the HLT. Ensure the HLT is at least 50% full so there is enough hot water to use as a heat exchanger. The recirculation process will enable you to heat up the mash tun or maintain temperature. The recirculation process will also help to clear your wort.

Step 4 – Sparge

Use the pump to pump hot water from HLT to the Mash Tun. While the hot water is entering the mash tun also open ball valve on the mash tun so that the flow out of the mash tun is appoximately the same as the flow into the mash tun.

Step 5 – Boil

After you have collected the desired amount of wort into your kettle fire up the burner, add hops and other additions.

Step 6 – Chill

Place the immersion chiller into the kettle in the last 10 minutes of the boil to sterilise the chiller. Attach garden hose to chiller and start flow of cold tap water. Stir the kettle to accellerate the cooling process.

Part Number RRP

RET9347 (Unassembled)

RET9330 (Assembled)

$1099.00

$1299.00

Page 78 of 78

Download