Performance data sheet for RS-4600

advertisement
MODEL RS-4600
C/S 4 (101.6 mm) STORM RESISTANT FIXED VERTICAL LOUVER
DESIGN DATA:
To maintain a CLASS A (99%) effectiveness rating
with a 29 mph wind speed and a rainfall rate of 3 in/hr
 Maximum intake core velocity 2.9 m/s (571 FPM)
 Maximum intake free area velocity 6.4 m/s (1260 FPM)
 Intake pressure drop 212.2 Pa (0.86 in. H2O)
 Intake capacity 2.9m3/s (6145 CFM)
To maintain a CLASS B (95%) effectiveness rating
with a 29 mph wind speed and a rainfall rate of 3 in/hr
 Maximum intake core velocity 3.2 m/s (630 FPM)
 Maximum intake free area velocity 6.9 m/s (1358 FPM)
 Intake pressure drop 249.3 Pa (1.00 in. H2O)
 Intake capacity 3.2m3/s (6674 CFM)
*louver tested with 1m2 core area, mill finish and no screen
SUGGESTED SPECIFICATIONS:
GENERAL: Furnish and install where indicated on the drawings C/S 4 (101.6 mm) STORM
RESISTANT FIXED VERTICAL LOUVER MODEL RS-4600 as manufactured by
Construction Specialties, Inc., Cranford, New Jersey. Complete details shall be submitted to the
architect for approval prior to fabrication. The supplier must be a member of AMCA or BSRIA.
MATERIAL: Frames and blades to be fabricated from 6063-T6 aluminum alloy. Blades to be
minimum 0.060 (1.52 mm) thick extrusions and frames to be a minimum 0.080 (2.03 mm)
thick. Louver to be mechanically fastened using stainless steel or aluminum fasteners. Louvers to
be supplied with 4 (101.6 mm) high by full depth sill flashing formed from minimum 0.050
(1.27 mm) thick aluminum. Sill flashing to have welded side panels. Louvers and sill flashing to
be installed in accordance with the manufacturer’s recommended procedures to ensure complete
water integrity performance of louver system. Louvers to be furnished with ½ (12.7 mm) mesh
screen secured within a 12 B & S gauge extruded aluminum frame.
STRUCTURAL DESIGN: Structural supports shall be designed and furnished by the louver
manufacturer to carry a wind load of not less than ________psf. (kPa). (Note: If this paragraph is
omitted or if the design wind load is not specified, the louvers will be manufactured in self
supporting units up to a maximum of 5 (1524 mm) wide by 8 (2438 mm) high. Any additional
structural supports required to adequately secure these units within the opening shall be the
responsibility of others.
HEAD
VERTICAL
HIGH
PERFORMANCE
BLADE
4"
SILL
SILL
FLASHING
SECTION VIEW
JAMB
MULLION
FINISH: All louvers shall be finished with C/S Powder Coat, a coating to be 1.5 to 3 mil. thick
full strength 100% resin Fluoropolymer coating. Finish to allow zero VOCs to be emitted into
facility of application. Finish to adhere to a 4H Hardness rating. All finishing procedures shall be
one continuous operation in the plant of the manufacturer. The coating shall meet or exceed all
requirements of AAMA specification 2605 “Voluntary Specification for High Performance
Organic Coatings on Architectural extrusions and Panels.” The louver manufacturer shall supply
an industry standard 20-year limited warranty against failure or excessive fading of the
Fluoropolymer Powder Coat finish. This limited warranty shall begin on the date of material
shipment.
SILL
DRAIN
PLAN VIEW
SCALE: 1-1/2" = 1'
WIND DRIVEN RAIN PERFORMANCE:
The louver test was based on a 39.370 (1.00 m) x 39.370 (1.00 m) core area unit tested at a
rainfall rate of 3 per hour (75 mm/hr) and with a wind directed to the face of the louver at a
velocity 29.1 mph (13 m/s). The test data shall show the water penetration effectiveness rating at
each corresponding ventilation rate.
Core Ventilation Rate (m/s):
Core Ventilation Rate (ft/min):
Free Area Ventilation Rate (ft/min):
Rating Effectiveness:
Effectiveness Rating:
0.0
0.5
0
98
0
215
A
A
A = 1 to 0. 99
1.0
1.5
197
295
433
648
A
A
B= 0.989 to 0.95
2.0
2.5
394
492
865
1081
A
A
C = 0.949 to 0.80
3.0
3.5
591
689
1298
1514
A
B
D = 0.80 to 0
Discharge Coefficient
Intake Cd = 0.162 (Class 4)
AMCA certifies the coefficient
class only
To download details and specifications visit www.c-sgroup.com. For technical and design assistance call 800-631-7379
PERFORMANCE DATA MODEL RS-4600
Height in Inches and Meters
Width in Inches and Meters
18
0.46
24
0.61
30
0.76
36
0.91
42
1.07
48
1.22
54
1.37
60
1.52
66
1.68
72
1.83
78
1.98
84
2.13
90
2.29
96
2.44
102
2.59
108
2.74
114
2.90
120
3.05
126
3.20
132
3.35
138
3.51
144
3.66
150
3.81
156
3.96
162
4.11
168
4.27
174
4.42
180
4.57
186
4.72
18
0.46
0.63
0.06
0.94
0.09
1.25
0.12
1.57
0.15
1.88
0.17
2.19
0.20
2.50
0.23
2.82
0.26
3.13
0.29
3.44
0.32
3.76
0.35
4.07
0.38
4.38
0.41
4.70
0.44
5.01
0.47
5.32
0.49
5.64
0.52
5.95
0.55
6.26
0.58
6.57
0.61
6.89
0.64
7.20
0.67
7.51
0.70
7.83
0.73
8.14
0.76
8.45
0.79
8.77
0.81
9.08
0.84
9.39
0.87
24
0.61
0.89
0.08
1.34
0.12
1.79
0.17
2.24
0.21
2.68
0.25
3.13
0.29
3.58
0.33
4.03
0.37
4.47
0.42
4.92
0.46
5.37
0.50
5.81
0.54
6.26
0.58
6.71
0.62
7.16
0.66
7.60
0.71
8.05
0.75
8.50
0.79
8.94
0.83
9.39
0.87
9.84
0.91
10.29
0.96
10.73
1.00
11.18
1.04
11.63
1.08
12.08
1.12
12.52
1.16
12.97
1.20
13.42
1.25
30
0.76
1.16
0.11
1.74
0.16
2.33
0.22
2.91
0.27
3.49
0.32
4.07
0.38
4.65
0.43
5.23
0.49
5.81
0.54
6.40
0.59
6.98
0.65
7.56
0.70
8.14
0.76
8.72
0.81
9.30
0.86
9.88
0.92
10.47
0.97
11.05
1.03
11.63
1.08
12.21
1.13
12.79
1.19
13.37
1.24
13.95
1.30
14.53
1.35
15.12
1.40
15.70
1.46
16.28
1.51
16.86
1.57
17.44
1.62
36
0.91
1.43
0.13
2.15
0.20
2.86
0.27
3.58
0.33
4.29
0.40
5.01
0.47
5.72
0.53
6.44
0.60
7.16
0.66
7.87
0.73
8.59
0.80
9.30
0.86
10.02
0.93
10.73
1.00
11.45
1.06
12.16
1.13
12.88
1.20
13.60
1.26
14.31
1.33
15.03
1.40
15.74
1.46
16.46
1.53
17.17
1.60
17.89
1.66
18.60
1.73
19.32
1.79
20.04
1.86
20.75
1.93
21.47
1.99
42
1.07
1.70
0.16
2.55
0.24
3.40
0.32
4.25
0.39
5.10
0.47
5.95
0.55
6.80
0.63
7.65
0.71
8.50
0.79
9.35
0.87
10.20
0.95
11.05
1.03
11.90
1.11
12.75
1.18
13.60
1.26
14.45
1.34
15.30
1.42
16.14
1.50
16.99
1.58
17.84
1.66
18.69
1.74
19.54
1.82
20.39
1.89
21.24
1.97
22.09
2.05
22.94
2.13
23.79
2.21
24.64
2.29
25.49
2.37
48
1.22
1.97
0.18
2.95
0.27
3.94
0.37
4.92
0.46
5.90
0.55
6.89
0.64
7.87
0.73
8.86
0.82
9.84
0.91
10.82
1.01
11.81
1.10
12.79
1.19
13.77
1.28
14.76
1.37
15.74
1.46
16.73
1.55
17.71
1.65
18.69
1.74
19.68
1.83
20.66
1.92
21.65
2.01
22.63
2.10
23.61
2.19
24.60
2.29
25.58
2.38
26.57
2.47
27.55
2.56
28.53
2.65
29.52
2.74
54
1.37
2.24
0.21
3.35
0.31
4.47
0.42
5.59
0.52
6.71
0.62
7.83
0.73
8.94
0.83
10.06
0.93
11.18
1.04
12.30
1.14
13.42
1.25
14.53
1.35
15.65
1.45
16.77
1.56
17.89
1.66
19.01
1.77
20.13
1.87
21.24
1.97
22.36
2.08
23.48
2.18
24.60
2.29
25.72
2.39
26.83
2.49
27.95
2.60
29.07
2.70
30.19
2.80
31.31
2.91
32.42
3.01
33.54
3.12
60
1.52
2.50
0.23
3.76
0.35
5.01
0.47
6.26
0.58
7.51
0.70
8.77
0.81
10.02
0.93
11.27
1.05
12.52
1.16
13.77
1.28
15.03
1.40
16.28
1.51
17.53
1.63
18.78
1.75
20.04
1.86
21.29
1.98
22.54
2.09
23.79
2.21
25.04
2.33
26.30
2.44
27.55
2.56
28.80
2.68
30.05
2.79
31.31
2.91
32.56
3.02
33.81
3.14
35.06
3.26
36.31
3.37
37.57
3.49
66
1.68
2.64
0.25
3.96
0.37
5.28
0.49
6.60
0.61
7.92
0.74
9.24
0.86
10.55
0.98
11.87
1.10
13.19
1.23
14.51
1.35
15.83
1.47
17.15
1.59
18.47
1.72
19.79
1.84
21.11
1.96
22.43
2.08
23.75
2.21
25.07
2.33
26.39
2.45
27.71
2.57
29.02
2.70
30.34
2.82
31.66
2.94
32.98
3.06
34.30
3.19
35.62
3.31
36.94
3.43
38.26
3.55
39.58
3.68
72
1.83
2.91
0.27
4.36
0.41
5.81
0.54
7.27
0.68
8.72
0.81
10.17
0.95
11.63
1.08
13.08
1.22
14.53
1.35
15.99
1.49
17.44
1.62
18.90
1.76
20.35
1.89
21.80
2.03
23.26
2.16
24.71
2.30
26.16
2.43
27.62
2.57
29.07
2.70
30.52
2.84
31.98
2.97
33.43
3.11
34.88
3.24
36.34
3.38
37.79
3.51
39.24
3.65
40.70
3.78
42.15
3.92
43.60
4.05
Upper Numerals English Units/Lower Numerals Metric Units
Exhaust
and
Exhau
st
Intake
and
Exha
ust
For a 48 X 48 sized louver
Construction Specialties, Inc.
Manufacturing & Sales Location
www.c-sgroup.com
Cranford, New Jersey
49 Meeker Avenue 07016
Telephone: (800) 631-7379
Fax: (905) 272-2920
For assistance with overseas requirements,
call C/S International (908) 236-0800
©Copyright November 2015. Construction Specialties, Inc., reserves the
right to make design changes or to withdraw any design without notice.
Download