Outdoor-XUPs ~ 2100 watts, 230 vac, UPS with voltage regulation, 3000AHV/3000BHV
Outdoor XUPs Series
230 vac outdoor uninterruptible power system
Outdoor
XUPs
Outdoor XUPs
model
3000AHV
3000 VA
2100 watts
230 vac
16 min @2100W
45 min @1050W
-20° to +60°C;
-40° to +60°C
with optional
battery heater
3000BHV
3000 VA
2100 watts
230 vac
45 min @2100W
2 hrs @1050W
-20° to +60°C;
-40° to +60°C
with optional
battery heater
Pure sine wave
Wide temperature batteries
Outdoor UPS with voltage regulation
TSi Power Outdoor XUPs-3000AHV/BHV units
are constructed with extreme wide temperature
batteries, and are housed in a weather protected
IP44(NEMA-3R) enclosure. These offer lineinteractive automatic voltage regulation, over/
under-voltage protection, surge protection with
heavy duty noise filtering, communications
capability and optional extended battery backup.
Key Outdoor XUPs benefits
This rugged UPS design, with microprocessorcontrolled 20 kHz sine wave inverter and
optional conformal coated boards, reduces
the number of solid-state devices required for
power conversion and is suitable for use in
severe outdoor environments.
Outdoor XUPs extreme/wide temperature
batteries allow operation of the UPS system over
an ambient temperature range of -20°to +60°C
(- 4° to +140°F); - 40° to +60°C (-40° to +140°F)
with optional battery heater. Built-in automatic
voltage regulation enables a wide input voltage
window within which power is delivered without
having to drain or exercise the batteries, thereby
ensuring long battery life. A fan exhausts hot air
to protect batteries and electronics.
OutdoorXUPs-3000AHV battery run-times are
16 minutes at 2100 watts load, and 45 minutes
with a 1050 watts load; battery runtimes for the
OutdoorXUPs-3000BHV are 45 minutes at 2100
watts load, and 2 hours with a 1050 watts load.
How the Outdoor XUPs works
TSi Power Corporation
1103 West Pierce Ave
Antigo, WI 54409 USA
800 874 3160 (USA only)
Phone +1 715 623 0636
Fax +1 715 623 2426
sales@tsipower.com
www.tsipower.com
Copyright © 2010 TSi
Voltage regulation
The Outdoor XUPs Series UPS provides automatic voltage regulation with surge protection
and noise filtering, as well as overvoltage
protection with a threshold of 280 vac, and
undervoltage protection with a threshold of
190 vac. Upon a brownout, overvoltage, or
loss of power, the XUPs will transfer to battery
power in less than 4 milliseconds, enabling
uninterrupted operation of computer, telecom,
surveillance, signaling or other systems.
LEDs provide visual assessment of UPS status.
By unlatching, the front door swings open; inside
the cabinet is an array of LED status indicators
and a power on/off control switch.
Note: shown with optional
liquid-tight cable glands
Typical applications
This heavy duty outdoor UPS system is ideal
for protection of WiFi/GSM/CDMA/satellite
base stations, wireless communications/
perimeter surveillance and security/gate
control systems, LED traffic light/roadway
display systems and industrial remote
terminal units (RTUs).
Key Outdoor XUPs features
• Cabinet can be pedestal(ground),
pole, or wall mounted
• Full weather outdoor protection
IP44(NEMA-3R) metal cabinet
• Pure sine wave output
• Over/under-voltage protection
• Remote power on/off (optional)
• Wide temperature batteries
• Heavy-duty surge protection
and noise filtering
• Automatic voltage regulation
• Comprehensive array of
status bargraphs for voltage,
load and battery levels
• Two year warranty on electronics,
parts and labor; manufacturer’s
warranty on batteries
1
2
Specifications
OutdoorXUPs-3000AHV/BHV
Outdoor
XUPs
Specification
OutdoorXUPs-3000AHV
OutdoorXUPs-3000BHV
Electrical
Capacity in VA (watts)
UPS topology
3000VA (2100W)
High efficiency line-interactive with 20 kHz PWM sine wave inverter
Input
Nominal voltage
Input current
Operating voltage
230 volts ac
12 amperes maximum @ 230 vac
190–280 vac without using batteries
Operating frequency
47–63 Hz
Output
Nominal voltage
Note: shown with optional
liquid-tight cable glands
Outdoor lineinteractive UPS
with automatic
voltage regulation
and extreme/wide
temperature
batteries
Voltage regulation
230 vac +/- 8% upon changes in line or load
Crest ratio
Output waveform
Power efficiency
Power on/off switch
Transfer time
Batteries
Battery backup time
Recharge time
SNMP interface for
UPS monitoring and
automatic shutdown
configuration
(optional)
Surge let-through
voltages
Status indicators
TSi’s ongoing product improvement process makes specifications
subject to change. Other companies product names herein are for
identification purposes only, and
may be trademarks of their
respective companies.
230 volts ac
Input/output
connections
3:1
Pure sine wave, less than 3% THD with linear load
97%, under full load conditions
On/off rocker style power switch
<4 milliseconds
32 ampere hours, 48 vdc
64 ampere hours, 48 vdc
Wide temperature sealed gel-cells -20° to +60°C (-4° to+140°F);
-40° to +60°C (-40° to+140°F) with optional battery heater.
16 minutes @ 2100 watts load.
45 minutes @ 2100 watts load.
45 minutes @ 1050 watts load.
2 hours @ 1050 watts load.
8 hours to 90% capacity
16 hours to 90% capacity
after full discharge.
after full dischrge.
Using an external SNMP adapter, the RS-232 signals (from the DB-9
female connector) from the UPS can be converted to 10M/100M fast
Ethernet signals (and RJ-45 connection) for external UPS monitoring/
configuration capability using Telnet, web browsers, or NMS (for
TCP/IP, UDP, SNMP, Telnet, SNTP, PPP, HTTP & SMTP protocols).
Test pulse injection: Line-Neutral: Line-Ground: and Neutral-Ground.
Combination Wave: L-N: 450V, L-G: 300 V, N-G: 300V
5 LED load level indicator: 0 to 100% of rated load.
5 LED battery charge level indicator from 0 to 100% of rated charge.
3 LED indicators for: in boost, buck or normal mode.
3 LED indicators for: inverter on/off, battery fault, and overload.
3 position terminal blocks provided for 3 x 2.5mm2 (14 AWG)
connections via 12mm(1/2”) diameter holes.
Physical
Dimensions
Weights
Steel cabinet
Mounting options
610 mm (24”) wide x 406 mm (16”) deep x 762 mm (30”) high
91 kg (200 lbs)
182 kg (400 lbs)
Full weather IP44(NEMA-3R) outdoor design.
Bolting or banding mountable to monopole via optional ‘H’ style
bracket (steel mounting bands not included), pedestal (ground) with
optional bottom mounted u-channel, or wall mountable via four wall
mounting ‘feet’ which are included standard.
Environmental
TSi Power Corporation
1103 West Pierce Ave
Antigo, WI 54409 USA
800 874 3160 (USA only)
Phone +1 715 623 0636
Fax +1 715 623 2426
sales@tsipower.com
www.tsipower.com
Copyright © 2010 TSi
Operating temperature,
battery heater option
and cooling method
Moisture protection
-20° to +60°C (-4° to+140°F) ambient air temperature.
-40° to +60°C (-40° to+140°F) with optional battery heater.
Thermostat controlled exhaust fan.
Conformal coating of electronic boards for moisture resistance to
protect against high humidity environments.
Warranty
Warranty
2 year limited warranty, parts & labor; manufacturer’s battery warranty.
Outdoor XUPs Series
230 vac outdoor uninterruptible power system
optional bandable or
boltable monopole
mounting brackets
Outdoor
XUPs
Note: shown with optional
liquid-tight cable glands
OutdoorXUPs-3000AHV/BHV system architecture
utility
ac
input
ac
circuit
breaker
hot
earth
ground
chassis
190 – 280
volts ac
neutral
external battery
(optional)
heavy - duty
ac surge
protection,
noise filter
and
overvoltage,
undervoltage
disconnect
circuits
+ 10 %
0%
- 10 %
regulated XUPs
output 230 vac +/-8%
relay 1
logic
relay 2
battery
and
charger
dc
hot
neutral
ac
inverter
chassis ground
OutdoorXUPs-3000AHV/BHV at a glance
Heavy-duty outdoor UPS with line-interactive automatic
voltage regulation and extreme/wide temperature batteries
TSi Power Corporation
1103 West Pierce Ave
Antigo, WI 54409 USA
800 874 3160 (USA only)
Phone +1 715 623 0636
Fax +1 715 623 2426
sales@tsipower.com
www.tsipower.com
Copyright © 2010 TSi
• Wide ambient temperature range
sealed gel-cell batteries:
-20° to +60°C (-4° to +140°F); or
-40° to +60°C (-40° to +140°F)
with optional thermostat
controlled battery heater
• 230 vac +/-8% output
from 190–280 vac input
without going to batteries
• 48 vdc battery bus
• SNMP compatible (optional)
• 16 minutes @ 2100 watts, or
45 minutes @ 1050 watts with the
OutdoorXUPs-3000AHV
• Less than 4ms transfer time
• 45 minutes @ 2100 watts, or
2 hours @ 1050 watts with
the OutdoorXUPs-3000BHV
• Weather protected
IP44/NEMA-3R
painted metal cabinet
• Microprocessor-controlled
20 kHz PWM sine wave inverter
• Thermostat controlled
fan is included
3
4
Outdoor XUPs Series
OutdoorXUPs-3000AHV/BHV
Outdoor
XUPs
Mounting on a concrete pad with U-channel
Following is a drawing of a recommended pedestal/concrete pad mounted installation
using the TSi Power aluminum U-channel mounting brackets. When ordered with
these, the units will come with them already bolted to the bottom of the cabinet.
There are four pre-drilled bolt holes that will then allow bolting of the unit to a
concrete pad or other mounting surface, such as a Quazite® pad or Unistrut®.
Outdoor XUPs
pad mounted
Note: shown with optional
liquid-tight cable glands
610mm
(24”)
406mm
(16”)
thermostat
controlled
hot air vent for
exhaust fan
(placement varies)
762mm
(30”)
door
hinges
IP44(NEMA-3R)
metal cabinet
door latch
102mm
(4”)
intake
air vent
underneath
(or on side)
XUPs
output
input/output holes
(placement varies)
ac
input
64mm
(2.5”)
6.3mm (.25”) thickness
aluminum U-channel
concrete pad
102mm (4”)
above ground
recommended
TSi Power Corporation
1103 West Pierce Ave
Antigo, WI 54409 USA
800 874 3160 (USA only)
Phone +1 715 623 0636
Fax +1 715 623 2426
sales@tsipower.com
www.tsipower.com
Copyright © 2010 TSi
Outdoor-XUPs-2100W-230-vac-UPS+voltage-regulation-3000-AHV-BHV-2010-06-06.pdf