"BA-475B" * BRASS BALL VALVE*** TWO-PIECE, FULL-PORT 600 WOG 6 6 (1/4”-3”) 400 WOG (4”) THREADED ENDS* BLOW-OUT PROOF STEM MSS-SP110 ASME A112.4.14 1 2 PART * Brass, Forged Brass, Forged 11 WORKING TEMPERATURE - C 93 121 149 177 204 66 38 9 6 7 12 2 4 2760 300 2070 200 1380 100 690 10 D F 4830 3450 50 APPROVED 1140 E 1 4” Only 0 ** 5 4140 400 9 8 600 500 US R UL 125 UL 842 A WORKING PRESSURE - KPa WORKING PRESSURE - psi 700 US US CGA 9.1a *Also Available BA-475B-LL (Locks only N in closed position) ** Not Suitable For Ammonia Service ***Not intended for use in potable water. ****4” Valve Only ASTM SPEC. PRESSURE - TEMPERATURE CHART 10 C US 1/4” through 2” Only B283 B283 CP Brass 3/8” - 1-1/4” B283 3 Ball CP Brass, Cast 1-1/2 - 4” B584 4 Ball Seal PTFE Commercial 5 Stem Brass B124 B124 Brass Brass B124 Buna-N D2006 D2006 6 6 O-Ring D2006 Commercial 7 7 ThrustWasher PTFE 8 Gland Nut Brass B16 9 Packing PTFE Commercial 10 Handle Zinc Plated Steel Commercial 11 Handle Nut Zinc Plated Steel Commercial ****12 Body Seal PTFE Commercial 6 7 Body Tailpiece MATERIALS R C ANSI Z 21.15a ASME B16.44 MATERIALS LIST ITEM / 4" 1 "4 3 A C B 100 150 200 250 300 350 400 450 WORKING TEMPERATURE - F Seat Material Rating DIMENSIONS ValveSize A B C D E F UNITS INCHES mm INCHES mm INCHES mm INCHES mm INCHES mm THREAD SIZE Cv TORQUE WEIGHT inͲlb N.m lbs Kg 1/4" 0.39 9.9 1.87 47 0.95 24 1.42 36 3.14 80 3/8" 0.39 9.9 1.87 47 0.95 24 1.42 36 3.14 80 1/2" 0.51 12.7 2.25 57 1.12 61 1.46 37 3.14 80 3/4" 0.76 19.3 2.62 67 1.31 33 1.93 49 4.35 110 1" 1.00 25 3.06 78 1.91 49 2.1 53 4.35 110 1/4"NPT 3/8"NPT 1/2"NPT 3/4"NPT 1"NPT 12 16 1.8 0.33 0.149 12 16 1.8 0.34 0.155 18 19 2.1 0.47 0.213 40 58 6.5 0.89 0.403 72 69 7.8 1.24 0.565 1Ͳ1/4" 1.26 32.0 3.5 89 2.21 56 2.33 59 5.00 127 1Ͳ1/2" 1.50 38.1 3.75 95 1.87 47 2.52 64 5.00 127 1Ͳ1/4"NPT 1Ͳ1/2"NPT 112 89 10 1.66 0.755 161 124 14 2.34 1.064 2" 2.00 51.0 4.38 111 2.19 56 2.96 75 6.90 175 2Ͳ1/2" 2.48 63 5.16 131.1 2.58 65.5 3.94 100.1 7.87 199.9 3" 2.95 74.9 6 152.4 3 76.2 4.37 111 7.87 199.9 4" 3.94 100.1 8.2 208.3 4.11 104.4 5.93 150.6 9.65 245.1 2"NPT 2Ͳ1/2"NPT 3"NPT 4"NPT 287 210 24 4.94 2.245 307 445 50 7.4 3.35 323 563 64 10.47 4.75 584 1080 122 34 16 Rev. 29 The information presented on this sheet is correct at the time of publication. Milwaukee Valve reserves the right to change design, and/or material specifications without notice. For the Installation, Operation and Maintenance Manual (IOM) see the Technical/Service Information section on our website. For the most current information access www.milwaukeevalve.com BV-21 MILWAUKEE VALVE