Instruction for the use of the RGB SMD LED Rigid Strip Light Bars Ⅲ, Features 1. Model: 11 Strip Multi color LED Kit with Remote (11 LED Strip Kit - BarLighting.com) LED Bar Lighting, Inc, - LED Lighting Kits for Homes, Restaurants, Bars, and etc. 2. I, Construction 3. This LED Lighting Kit includes: 4. 11 pcs of SMD RGB LED rigid light strips (Expandable to 16 total) The series of LED lights can be applied in kitchen cabinets, display cases, retail windows, bars, etc. as a unique decorative lighting or accent mood lighting. The series of lights work by 12V DC, powered by a LED power supply and Infra Red(IR) multi colored LED remote. Installed with RGB (Red, Green, Blue) LED light sources, this lighting source is more energy efficient and offer a longer lifespan compared to traditional light sources. The IR multicolored LED remote offers hundreds of colors and multiple color effect modes Control Mode: The 44 key infrared multicolored LED remote allows you to adjust L E D brightness, choose from a variety static color options and various color changing effects as well as, the ability to create and save up to 6 different colors in pre-designate DIY keys. 4 pcs of lamp cables 10 pcs of extension cables Brightness rise 22 pcs of mounting brack ets 44 pcs of screws (a Brightness fall(a total total of eight grading) of eight grading) Static red Static green Static orange Static light green 11 pcs of end caps Static dark yellow 33 pcs of self-adhesive tapes 1. Lamp Working Voltage: DC12V 2. Rated Lamp Power: 31.68W 100~240V AC 50/60Hz Static milk white blue Static yellow Static light blue Static purple Static green-white Static light yellow Static sky blue Static brown Static blue white Increase red Increase green Increase blue Speed up Decrease red Decrease green Decrease blue Speed-down DIY key1 DIY key2 DIY key3 Automatic change DIY key4 DIY key5 DIY key6 Flash on and off 3 color jumpy change 7 color jumpy change Instructions on the use of some keys: 1/3 Static dark Static white pink Output power: DC12V 4A 48W Infra Red (IR) color controller: DC 12V / 72W Static white Static royal purple 3. LED Power Supply Input power: Static blue On/Off Static cyan 1 pcs of LED power driver (1.5m cable), IR LED remote and controller box with connection box Ⅱ, Electrical Specs Pause/Run 3 color change fade 7 color change fade ●Keys of “Brightness Increase”, “Brightness Decrease”: 7 colors (Red, White, Cyan, Yellow, Green, Purple, Blue) fade changing Increasing and Decreasing the brightness of the LED lights on any static color. ●Key of “QUICK” and “SLOW”: ●DIY (Do It Yourself) keys for static colors: Valid only for increasing or reducing the color change speed of “JUMP3”, “JUMP7”, “FADE3”, On the LED Remote, there are 3 groups of “Increase” and “Decrease” arrows for Red, Green, “FADE7” Blue colors, and 6 DIY color storing keys from DIY1 to DIY6. The 6 DIY keys are preset with standard mixed white color; end users can manually control its color by adjusting Red, Ⅳ, Installation Green, and Blue arrows until desired color is achieved. There are three typical mounting solutions of the LED lights, shown as below A, B, C, user can choose a desired solution: (The power supply can handle up to 16 LED Strip Lights) Choose desired DIY key, for example “DIY2”, press the DIY2 key which should activate default color (white), next adjust the color by using the Red, Green and Blue up/down arrows. Once the desired color has been reached, press the same DIY key again. The Solution A color is now saved. ●Key of “Auto”: By pressing “Auto” key, except the DIY color modes and Flash mode, the other color modes will Solution B (Inter-link) be running continuously in a recycle way. ●Key of “Flash”: By pressing “Auto” key, except the DIY color modes and Flash mode, the other color modes will be running continuously in a recycle way. ● Key of “JUMP3” (3 Colors Jump Changing): Solution C (Butt-link) 3 colors (Red, Green, Blue) jump changing ●Key of “JUMP7” (7 Colors Jump Changing): 7 colors (Red, Yellow, Green, Cyan, Blue, Purple, White) jump changing continuously ●Key of “FADE3” (3 Colors Fade Changing): 3 colors (Red, Green, Blue) fade changing Installation Steps: ① First of all, choose an applicable mounting solution from above Solution A, B, C. ② Decide the right mounting positions, measure and mark the mounting areas of the LED strips, the locations for the connectors, etc. Ensure that the cables’ lengths are enough. ③ Mount the LED strips. According to the mounting surfaces, you can choose an ideal way below: ●Key of “FADE7” (7 Colors Fade Changing): 2/3 According to the mounting surfaces, you can choose an ideal way below: a) by self-adhesive tapes Tear off the protection paper of the self-adhesive tapes to stick the tapes on the back of the strips, then stick the strips firmly onto the mounting surfaces Notes: Remotes are universal and will control other similar IR LED kits like our LED Disc Kits, LED Strip Kits and Flexible LED Lighting Kits. The LED lighting kits may not sync up with color or b) rotation, but static colors will look exactly the same creating the by mounting brackets effect of having the same light system throughout your home or First fix the brackets by screws, then clip the strips inside the brackets. business. ④ Connecting the lights according to one selected mounting solution A, B or C Order at www.BarLighting.com ⑤ Check the ends of the strips where no inter-linking, the end caps should be installed. ⑥ Insert the lamp cable connector into the connection box. ⑦ Connect the power supply and color controller system to power source. Cautions: 1. 2. 3. 4. This series of strip lights are the extra low voltage lighting, and should be working by constant voltage 12V DC power. Before commencing installation, the mains power should be closed down. The mounting surfaces should be free of the dust, oil stain and uneven materials. In need of cleaning the light strips, use a damp cloth, never a strong detergent. 3/3