Strand Lighting - Dallas
10911 Petal Street
Dallas, TX 75238
Tel: 214-647-7880
Fax: 214-647-8031
Strand Lighting - New York
267 5th Ave, 4th Floor
New York, NY 10016
Tel: 212-213-8219
Fax: 212-532-2593
Strand Lighting - Asia Limited
Room 6-10, 20/F Delta House 3 On Yiu Street
Shatin, N.T. Hong Kong
Tel: + 852 2757 3033
Fax: + 852 2757 1767
Strand Selecon - Auckland
19-21 Kawana Street
Northcote, Auckland 0627
New Zealand
Tel: +64 9 481 0100
Fax: +64 9 481 0101
Strand Lighting - Europe
Marssteden 152
Enschede 7547 TD
The Netherlands
Tel: +31 53 4500424
Fax: +31 53 4500425
Website:
www.strandlighting.com
The material in this manual is for information purposes only and is subject to change without notice.
Strand Lighting assumes no responsibility for any errors or omissions which may appear in this manual.
For comments and suggestions regarding corrections and/or updates to this manual, please contact your
nearest Strand Lighting office.
El contenido de este manual es solamente para información y está sujeto a cambios sin previo aviso.
Strand Lighting no asume responsabilidad por errores o omisiones que puedan aparecer. Cualquier
comentario, sugerencia o corrección con respecto a este manual, favor de dirijirlo a la oficina de Strand
Lighting más cercana.
Der Inhalt dieses Handbuches ist nur für Informationszwecke gedacht, Aenderungen sind vorbehalten.
Strand Lighting uebernimmt keine Verantwortung für Fehler oder Irrtuemer, die in diesem Handbuch
auftreten. Für Bemerkungen und Verbesserungsvorschlaege oder Vorschlaege in Bezug auf Korrekturen
und/oder Aktualisierungen in diesem Handbuch, moechten wir Sie bitten, Kontakt mit der naechsten
Strand Lighting-Niederlassung aufzunehmen.
Le matériel décrit dans ce manuel est pour information seulement et est sujet à changements sans préavis.
La compagnie Strand Lighting n'assume aucune responsibilité sur toute erreur ou ommission inscrite dans
ce manuel. Pour tous commentaires ou suggestions concernant des corrections et/ou les mises à jour de ce
manuel, veuillez s'll vous plait contacter le bureau de Strand Lighting le plus proche.
Information contained in this document may not be duplicated in full or in part by any person without
prior written approval of Strand Lighting. Its sole purpose is to provide the user with conceptual
information on the equipment mentioned. The use of this document for all other purposes is specifically
prohibited.
Document Number: 2-450228-040
Version as of: 14 July 2011
Environ 3 Fan Control Installation & Operation Guide
©2011 Philips Group. All rights reserved.
Environ 3 Fan Control
Installation & Operation Guide
Important Safeguards
When using electrical equipment, basic safety precautions should always be followed
including the following:
a. READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
b. Do not use outdoors.
c. Do not mount near gas or electric heaters.
d. Equipment should be mounted in locations and at heights where it will not
readily be subjected to tampering by unauthorized personnel.
e. The use of accessory equipment not recommended by the manufacturer
may cause an unsafe condition.
f. Do not use this equipment for other than intended use.
g. Refer service to qualified personnel.
SAVE THESE INSTRUCTIONS.
WARNING: You must have access to a main circuit breaker or other power
disconnect device before installing any wiring. Be sure that power is disconnected
by removing fuses or turning the main circuit breaker off before installation.
Installing the device with power on may expose you to dangerous voltage and
damage the device. A qualified electrician must perform this installation.
WARNING: Refer to National Electrical Code® and local codes for cable
specifications. Failure to use proper cable can result in damage to equipment or
danger to persons.
CAUTION: Wire openings MUST have fittings or lining to protect wires/cables
from damage. Use 75° C copper wire only! Aluminum wire may not be used.
1
Installation & Operation Guide
Environ 3 Fan Control
TABLE OF CONTENTS
Preface ....................................................................................................................................... 3
About this Guide ............................................................................................................... 3
Additional Manuals........................................................................................................... 3
Product Overview ..................................................................................................................... 4
Environ 3 Fan Control Overview...................................................................................... 4
Installation ................................................................................................................................. 4
Installation Guidelines ...................................................................................................... 4
Installing Fan Control ....................................................................................................... 5
Adjusting Fan Control....................................................................................................... 7
Setting the Preset............................................................................................................... 7
Programming Presets ........................................................................................................ 7
Operation ................................................................................................................................... 8
Specifications ............................................................................................................................ 9
2
Environ 3 Fan Control
Installation & Operation Guide
PREFACE
About this Guide
The document provides installation and operation instructions for the following Environ 3
products:
•
61225 Environ 3 Strap Style Fan Control, 1.5A 3-speed
•
61242 Environ 3 Heatsink Style Fan Control, 1.5A 3-speed
Please read all instructions before installing or using this product. Retain this guide for future
reference.
IMPORTANT INFORMATION. PLEASE READ!
This unit is intended for installation in accordance with the National Electric Code® and local
regulations. It is also intended for permanent installation in indoor applications only. Before
any electrical work is performed, disconnect power at the circuit breaker or remove the fuse to
avoid shock or damage to the control. It is recommended that a qualified electrician perform
this installation.
Additional Manuals
The complete library of Environ 3 Preset Dimming Product manuals may be downloaded at
www.strandlighting.com. These manuals include:
•
Environ 3 Preset Dimming System (Complete Manual)
•
Environ 3 Master Control Stations, Dimmers, Switches, Channel Remotes
•
Environ 3 Fan Control
•
Environ 3 Power Extender
•
Environ 3 Infrared Transmitter
•
Environ 3 Relay Module
3
Installation & Operation Guide
Environ 3 Fan Control
PRODUCT OVERVIEW
Environ 3 Fan Control Overview
Environ 3 Fan Controls are for permanently installed 3-speed fan motors of up to 1.5 amps.
The unit is equipped with an LED readout, providing full-function, 3-way and multi-location
speed control when used with Environ 3 Channel Remotes. Manual override allows the fan
speed to be adjusted without affecting the current preset. An automatic 5-second high-speed
"kick start" on startup minimizes the possibility of fan motor stall. Custom engraved faceplates may also be ordered for this control.
INSTALLATION
Installation Guidelines
1.
All fan controls require a neutral connection.
2.
Strap fan controls mount individually or ganged together and are supplied without
faceplates. They accept Strand Environ 3 single and multi-gang faceplates or standard
decorator-style faceplates by others. Faceplates are not included with Strap fan controls
and must be ordered separately. Heatsink devices cannot be ganged with Strap devices.
3.
Heatsink fan controls incorporate low-profile heatsinks and are supplied with single-gang
faceplates. Multi-gang faceplates are also available. Heatsink devices mount side-by-side
and do not need to be derated. Heatsink devices cannot be ganged with Strap devices.
4.
Fan controls may be fed individually or in groups, regardless of phase.
5.
DO NOT connect Environ 3 dimmers to Ground Fault Interrupt (GFI) or Ground Fault
Circuit Interrupter (GFCI) circuit breakers.
4
Environ 3 Fan Control
Installation & Operation Guide
Installing Fan Control
CAUTION: Before any electrical work is performed, disconnect power at the
circuit breaker or remove the fuse to avoid shock or damage to the unit.
Step 1. If you are replacing an existing device with a fan control:
a. Remove faceplate from existing device
b. Unscrew and pull device out of wallbox.
c. Disconnect wires from device. Using a voltage tester, identify and mark the
"hot" and the "load" wires connected to the device.
Step 2. If using Environ 3 faceplate (sold separately) before connecting any wires, be sure
that Environ 3 faceplate mounting adapter plate is behind device with alignment
tabs facing forward. Tabs should rest within centering holes of aluminum mounting
strap.
Step 3. Be sure fan control is in "System Off" position by firmly pressing bottom of device
until it snaps into place and the "System Off" label at the top of device is exposed.
Step 4. Connect the fan control wires to the wallbox wires as follows:
a. Black to Hot (120VAC Source)
b. White to Neutral *
c. Red to Load (Fan)
d. Yellow to Remote **
e. Purple to Network Connection (Line Voltage Class 1) ***
Black
White
Red
Yellow
Purple
Hot
Neutra
l
tor
an Mo
F
Remo
te**
rk
Netwo
Figure 1: Installing Fan Control Device
Step 5. Be sure Ground wire (bare stranded) is connected to earth ground. Note: Miswiring or failure to connect ground may result in improper operation of device.
Step 6. Ensure all wire connections are tight and no bare copper is exposed.
Step 7. Install device into wallbox, making sure that all wires are neatly installed into
wallbox. Using mounting screws provided, secure device into wallbox.
5
Environ 3 Fan Control
Installation & Operation Guide
Step 8. Install faceplate.
120VAC
L N
61225
61242
Red
White
Black
N
Yellow*
120VAC
L N
120VAC
L N
61225
61242
61200
White
Black
White
Black
Purple
Red
N
Yellow*
61228
61245
* Cap Yellow wire if not used
for remote connection.
Yellow
Black
Grey
Figure 2: System Wiring
*
The White wire must be connected to the neutral wire in the wallbox. Failure to
connect the White wire to the neutral will result in improper operation.
**
For 3-way installation only: cap yellow wire if not used.
*** Link all Environ 3 devices using one line voltage wire connected between each
Purple wire. Connected devices will operate as a system.
6
Environ 3 Fan Control
Installation & Operation Guide
Adjusting Fan Control
For fans equipped with built-in variable speed devices, these devices must be set at their
MAXIMUM SPEED for proper operation. Adjustments to their settings must only be made
with fan control in HIGH position. Follow these steps:
a. Adjust fan control to HIGH and turn on.
b. Adjust fan’s built-in control to maximum speed.
c. Adjust fan control to lowest speed setting.
d. Check fan for minimum speed to ensure fan stall does not occur.
e. If further adjustment is required, repeat steps a – d.
After installing fan control and setting fan motor to its highest speed, discontinue use of fan’s
pull chain.
Setting the Preset
After installation of the fan control, set the preset speed as follows:
Step 1. Adjust fan control to the desired speed (low, medium or high).
Step 2. Press the Set button (Figure 4).
Programming Presets
After you have completed installation of all of the Environ 3 devices, and have energized the
system, programming of each preset can be performed (low, medium, high, off).
Step 1. Tap the preset button (ON, A, B, C, D) on the Environ 3 Master that you wish to
program (Figure 3).
Step 2. Adjust the fan control to the desired speed.
Step 3. Press the Set button.
Step 4. Repeat steps 1–3 until all presets have been programmed.
Note: Fan controls may be programmed off for the "ON" preset.
Preset
Buttons
(ON, A, B, C, D)
Figure 3: Master Station
7
Environ 3 Fan Control
Installation & Operation Guide
OPERATION
Operate the fan control device as follows. (Refer to Figure 4 below.)
•
To turn fan on (to its preset level), tap top of rocker.
•
A second tap of the top rocker turns fan on to high speed.
•
To adjust fan speed, press and hold top or bottom of rocker until desired speed is
reached, then release.
•
To turn fan off, tap the bottom of the rocker.
•
Two quick taps of the top rocker will turn the fan on to high speed.
•
LEDs on the fan control indicate status.
- Red LED is on when fan control is off, to locate fan control when room is dark.
- As many as three green LEDs may be illuminated at any given time.
- The bright green LED indicates the current speed of the control.
- The medium green LED indicates the preset speed of the current preset.
- The dim green LED indicates the preset speed of the ON preset.
Note: Fan controls DO NOT respond to raise/lower commands from masters on the purple
wire.
Note: Operation of the fan control from a 3-way remote will be identical to the local controls.
This remains true even if the ON preset is programmed to be OFF.
Red LED (Off)
High Speed
Medium Speed
Set Button
Low Speed
Green LED
Figure 4: Fan Control Operation
8
Environ 3 Fan Control
Installation & Operation Guide
SPECIFICATIONS
Voltage Input: 108–132VAC, 60Hz, ±3Hz
Operating Temperature: 0-40 Centigrade, 32-104 Fahrenheit
Load: Fan motor, 120VAC, 60Hz, 1.5 Amp maximum
Dimensions:
0.37"
1.68"
3.25"
1.37"
0.50"
2.61"
3.25"
4.50"
4.0"
Strap Models
1.2"
Heatsink Models
9
Part No. 2-450228-040