Solution Overview
HP Server Solutions
Note: This webpage describes nonvirtualized “appliance” support for HP servers. For
virtualization support, refer to http://www.cisco.com/go/uc-virtualized.
Cisco supports software applications from the Cisco® Unified Communications
portfolio that install on specific configurations of customer-provided HP DL380-G6 and
DL320-G5p servers. Available applications include: Cisco Unified Communications
Manager, Cisco Emergency Responder, Cisco Unified Application Environment, Cisco
Unity® meeting applications, Cisco Unity Connection, Cisco Unified Presence, Cisco
Unified Mobility Advantage, Cisco Unified MeetingPlace® conferencing, Cisco Unified
MeetingPlace Express, Cisco Unified Contact Center Express, Cisco Unified Contact
Center Enterprise and Hosted, Cisco Unified Intelligent Contact Management
Enterprise and Hosted, Cisco Unified Customer Voice Portal, Cisco Unified IP
Interactive Voice Response (IP IVR), Cisco Unified Intelligence Center, Cisco Unified
Intelligence Suite, Cisco Unified Web Interaction Manager, Cisco Unified E-Mail
Interaction Manager, Cisco Unified Contact Center Management Portal, and Cisco
Unified Expert Advisor.
Cisco also supports the use of HP USB-attached tape drives as local backup devices. Refer to the “HP Tape
Drives” section later in this document for details and ordering instructions.
Customer-provided servers must exactly match the vendor, make, model, specifications, and parts lists in the
configurations listed in the following sections to be supported. Deviations are not supported, and may result in an
incomplete or failed install, or postinstallation problems. Customer-provided servers must also be on the certified
hardware compatibility list for the intended software product and version.
Where equivalent Cisco MCS 7800 Series Media Convergence Server model numbers are given, they should be
interpreted as the configurations used by Cisco Unified Communications Manager. The same MCS model used for
other applications (where the MCS model has a different suffix) may use different components and specifications.
Contact your local Cisco account team for more details.
Cisco no longer stocks memory and disk-drive components for end-of-sale Cisco MCS 7800 models. Please
consult the parts lists in the “Older Servers” section later in this document to get the HP part numbers of these
components, and procure them direct from HP. Remember to remove these parts if the Cisco Technical
Assistance Center (TAC) ever performs a Return Material Authorization (RMA) on the Cisco MCS 7800. If HP no
longer has these parts available, then consider migrating to either a newer appliance or a virtualized solution as
described at http://www.cisco.com/go/uc-virtualized.
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 1 of 21
Cisco Approved Hardware Configuration Requirements
Table 1 lists supported platforms for Cisco Unified Communications products listed previously. Note that the
Cisco MCS 7816 and MCS 7828 do not have a software-only supported option.
For additional details about platform support for the following Cisco Unified Communications products, please
consult the following references:
●
For Cisco Unified Communications Manager and Cisco Unified Communications Manager Session
Management Edition supported releases by server, please visit:
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/ps5748/ps378/prod_brochure0900aecd8062a4
f9.html.
●
For Cisco Emergency Responder, please visit the release notes at:
http://www.cisco.com/en/US/products/sw/voicesw/ps842/prod_release_notes_list.html.
●
For Cisco Unity Connection, please visit:
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6789/ps5745/ps6509/data_sheet_c78-491743.html.
●
For the Cisco Unity solution, please visit:
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6789/ps5745/ps2237/product_data_sheet0900aecd
802132ef.html.
●
For Cisco Unified Mobility Advantage, refer to “Ordering Information” in the data sheet for Cisco Unified
Mobile Communicator at: http://www.cisco.com/en/US/products/ps7271/products_data_sheets_list.html.
●
For Cisco Unified Contact Center Express, please visit:
http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_device_support_tables_list.html.
●
For Cisco Unified Contact Center Enterprise, refer to Appendix A of the bill of materials at:
http://www.cisco.com/en/US/products/sw/custcosw/ps1844/products_implementation_design_guides_list.ht
ml.
●
For Cisco Unified Customer Voice Portal, refer to the Cisco Unified Customer Voice Portal hardware and
software specifications at:
http://www.cisco.com/en/US/products/sw/custcosw/ps1006/prod_technical_reference_list.html.
●
For Cisco Unified Presence hardware and software compatibility information, please visit:
http://www.cisco.com/en/US/products/ps6837/products_device_support_tables_list.html.
●
For the Cisco Unified Communications Management Suite, please visit: http://www.cisco.com/go/ucvirtualized.
Please contact HP for hardware options for rack-mount kits, power supplies, and power cords.
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 2 of 21
Table 1.
Currently Supported Hardware Configurations
Customer-Provided HP
Hardware Configuration
(equivalent to Cisco MCS 7800
model or generation)
Equivalent Hardware-Only Cisco
MCS 7800 Model or Generation
Product IDs
HP Label
HP Part Number
DL380-G6 Server
Equivalent to Cisco MCS 7835.
Not applicable
AX692A
1 Quad-Core Intel 2.00Ghz
Nehalem E5504 Processor
Check above references for further
detail on supported applications.
For details, or to order, see
http://www.hp.com/go/cisco/server
solutions
4GB RAM
2x 300GB Hard Drives
DL380-G6 Server
1 Quad-Core Intel 2.53Ghz
Nehalem E5540 Processor
6GB RAM
4x 300GB Hard Drives
DL380-G6 Server
2 Quad-Core Intel 2.53 Ghz
Nehalem E5540 Processor
8GB RAM
4x 300GB Hard Drives
DL320-G5p Server
Single Intel E8400 3-GHz
Processor
2G RAM
2x 500GB Hard Drives
Equivalent to Cisco MCS 7845 for
Cisco Unified Communications
Manager.
Not applicable
For details, or to order, see
http://www.hp.com/go/cisco/server
solutions
Check above references for further
detail on supported applications.
Equivalent to Cisco MCS 7845 for
Cisco unified messaging and
contact center applications.
AX691B
Not applicable
AX693A
For details, or to order, see
http://www.hp.com/go/cisco/server
solutions
Check above references for further
detail on supported applications.
Previously also sold as:
Previously also labeled as:
AT982B
MCS-7825-H4-IPC1
MCS-7825-H4
MCS-7825-H4-RC1
MCS-7825-H4-ECS1
For details, or to order, see
http://www.hp.com/go/cisco/server
solutions
MCS-7825-H4-CCX1
MCS-7825-H4-CCE1
MCS-7825-H4-ECS1
MCS-7825-H4-MOB1
Check above references for further
detail on supported applications.
Ordering Instructions from HP
Customers must use the HP provided bundle part numbers in Table 1, and they must follow the HP-provided
ordering instructions at http://www.hp.com/go/cisco/serversolutions.
These special HP original-equipment-manufacturer (OEM) configurations are for Cisco only, and are not likely to
be available through HP standard customer, reseller, or distributor resources.
Older Servers
If you are using older Compaq or HP servers and want to upgrade to newer software releases, refer to Table 2 for
a list of older configurations that are still supported. Note that HP has discontinued these models and you can no
longer purchase them from HP or its resellers. Please contact your local Cisco account team for information about
replacement models and ordering assistance.
Please note that end-of-sale Cisco MCS 7800 server models are still fully supported by the Cisco TAC (for
troubleshooting, dispatch, repair, and replacement) until the end-of-support date. End-of-sale server models are
also still supported for software upgrades per the compatibility matrices provided with Table 1.
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 3 of 21
Table 2.
Older Supported Hardware Configurations (not shipping)
Customer-Provided HP Hardware Configuration (equivalent to
Cisco MCS 7800 model or generation)
Equivalent Hardware-Only Cisco MCS 7800 Model or Generation
Product IDs
DL380-G6 Server
Not applicable (previously sold by HP as special part number AX690A).
1 Quad-Core Intel 2.00Ghz Nehalem E5504 Processor
4GB RAM
2x 146GB Hard Drives
DL380-G6 Server
1 Quad-Core Intel 2.53Ghz Intel Nehalem E5540 Processor
Not applicable (HP special part number AX691A updated to use newer
disk drives).
6GB RAM
4x 146GB Hard Drives
DL380-G5 Server
MCS-7845-H2-IPC2
2x Xeon 5140 2.33GHz Processor
MCS-7845-H2-CCX2
4G RAM
MCS-7845-H2-CCE2
4x 146GB Hard Drives
MCS-7845-H2-MOB1
MCS-7845-H2-RC2
DL380-G5 Server
MCS-7845-H2-CCE3
2x Xeon E5345 2.33GHz Quad-Core Processor
MCS-7845-H2-ECS3
4G RAM
4x 146GB Hard Drives
DL380-G5 Server
MCS-7845-H2-CCE4
2x Xeon E5345 2.33GHz Quad-Core Processor
MCS-7845-H2-ECS4
4G RAM
8x 146GB Hard Drives
DL380-G5 Server
MCS-7835-H2-IPC2
Single Xeon 5140 2.33GHz Processor
MCS-7835-H2-RC2
2G RAM
MCS-7835-H2-CCX2
2x 146GB Hard Drives
MCS-7835-H2-CCE2
MCS-7835-H2-ECS2
DL380-G5 Server
MCS-7845-H2-IPC1
Dual Xeon 5140 2.33-GHz Processor
MCS-7845-H2-CCE1
4GB RAM
MCS-7845-H2-CCX1
4x 72GB Hard Disk
DL380-G4 Server
MCS-7845-H1-IPC1
Dual Xeon 3.4-GHz Processor
MCS-7845-H1-CC1
4GB RAM
MCS-7845-H1-ECS2
4x 72GB Hard Disk
MCS-7845-H1-ECS1 (4x72-GB and 2x144-GB hard disk configuration)
DL380-G3 Server
MCS-7845H-3.0-IPC1
Dual Xeon 3.06-GHz Processor
MCS-7845H-3.0-CC1
4GB RAM
4x 72GB Hard Disk
DL380-G2 Server
MCS-7845H-2.4-EVV1
Dual Xeon 2.4-GHz Processor
2GB RAM
4x 72GB Hard Disk
DL380-G2 Server
MCS-7845-1400-HW
Dual Pentium III 1.4-GHz Processor
4GB RAM
4x 72GB Hard Disk
DL380-G5 Server
MCS-7835-H2-IPC1
Single Xeon 5140 2.33-GHz Processor
MCS-7835-H2-CCE1
2GB RAM
MCS-7835-H2-CCX1
2x 72GB Hard Disk
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 4 of 21
Customer-Provided HP Hardware Configuration (equivalent to
Cisco MCS 7800 model or generation)
Equivalent Hardware-Only Cisco MCS 7800 Model or Generation
Product IDs
DL380-G4 Server
MCS-7835-H1-IPC1
Single Xeon 3.4-GHz Processor
MCS-7835-H1-CC1
2GB RAM
MCS-7835-H1-ECS1
2x 72GB Hard Disk
DL380-G3 Server
MCS-7835H-2.4-EVV1
Single Xeon 2.4 or 3.0 GHz Processor
MCS-7835H-3.0-IPC1
1GB RAM
2x 36GB Hard Disk
DL380-G2 Server
MCS-7835-1266-NTD/TD
Single Pentium III 1.4-GHz Processor
1GB RAM
2x 18GB Hard Disk
DL380-G2 Server
MCS-7835-1266-HW
Single Pentium III 1.266-GHz Processor
1GB RAM
2x18GB Hard Disk
DL380G1 Server
MCS-7835-1000-HW
Single Pentium III 1.266-GHz Processor
1GB RAM
2x18GB Hard Disk
DL320-G5 Server
MCS 7825-H3-IPC1
Single Intel 3050 Xeon 2.13-GHz
MCS-7825-H3-CCE1
2GB RAM
MCS-7825-H3-CCX1
2x 160GB Hard Disk
MCS-7825-H3-ECS1
DL320-G4 Server
MCS 7825-H2-IPC2
Single Intel 950 3.4-GHz
2GB RAM
80GB Hard Disk
DL320-G4 Server
MCS-7825-H2-IPC1
Single Pentium D 2.8-GHz
MCS-7825-H2-CCE1
2GB RAM
MCS-7825-H2-CCX1
80GB Hard Disk
DL320-G3 Server
MCS-7825-H1-IPC1
Single Pentium 4 3.4-GHz
MCS-7825-H1-CC1
2GB RAM
80GB Hard Disk
DL320-G2 Server
MCS-7825H-3.0-IPC1
Single Pentium 4 3.06-GHz
MCS-7825H-3.0-IPC2
1GB RAM
MCS-7825H-3.0-CC1
40GB Hard Disk
DL320-G2 Server
MCS-7825H-2.2-EVV1
Single Pentium 4 2.26GHz Processor
1GB RAM
40GB Hard Disk
DL320-G1 Server
MCS-7825-1133-HW
Single Pentium III 1133-MHz Processor
1GB RAM
40GB Hard Disk
DL320 Server
MCS-7825-800-HW
Single Pentium III 800-MHz Processor
512MB RAM
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 5 of 21
Customer-Provided HP Hardware Configuration (equivalent to
Cisco MCS 7800 model or generation)
Equivalent Hardware-Only Cisco MCS 7800 Model or Generation
Product IDs
20GB Hard Disk
Compaq DL320 Server with Pentium III 800-MHz Processor
The DL320 is a high-performance server platform designed for today’s unified communications applications. When
clustered properly, 2,000 users can be supported. The required processor is an Intel Pentium III 800-MHz
processor. No specific memory configuration is required as long as 512 MB of memory is provided.
Note that HP has discontinued sale of this configuration. Table 3 is only for reference to help you identify which
configuration you have deployed.
Table 3.
Components of Compaq DL320
Quantity
Compaq Part Number
Description
1
201501-001
ProLiant DL320-128 Model-1 ATA
1
212697-B21
20-GB ATA/100 7200 RPM Drive 1 in
1
128278-B21
256 MB Registered 133-MHz SDRAM DIMM
1
128277-B21
128 MB Registered 133-MHz SDRAM DIMM
1
212691-B21
CD ROM/Diskette Assembly
1
174574-B21
Third-Party Cabinet Rack Kit (Optional)
Compaq DL320 Server with Pentium III 1133-MHz Processor
The DL320 is a high-performance server platform designed for today’s unified communications applications. When
clustered properly, 4,000 Cisco Unified CallManager or Cisco Unified Communications Manager users can be
supported. The required processor is an Intel Pentium III 1.133-GHz processor. No specific memory configuration
is required as long as 1 GB of memory is provided.
Note that HP has discontinued sale of this configuration. Table 4 is only for reference to help you identify which
configuration you have deployed.
Table 4.
Components of Compaq DL320
Quantity
Compaq Part Number
Description
1
251280-0021 DL320R01
P1133 512 A40G US
2
128279-B21
512 Reg. SDRAM DIMM 133 ALL
1
174574-B21
3rd Party Rack-Mount Kit (Optional)
Compaq DL320-G2 Server with Pentium 4 2.26-GHz Processor
The DL320-G2 is a high-performance server platform designed for today’s unified communications applications.
When clustered properly, 4,000 Cisco Unified CallManager or Cisco Unified Communications Manager users can
be supported. The required processor is an Intel Pentium 4 2.266-GHz processor. No specific memory
configuration is required as long as 1 GB of memory is provided.
Note that HP has discontinued sale of this configuration. Table 5 is only for reference to help you identify which
configuration you have deployed.
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 6 of 21
Table 5.
Components of Compaq DL320-G2
Quantity
HP Part Number
Description
1
336549-001
DL320R02 P3.06/533 512 A1 US
2
287496-B21
512MB x 1 REG PC2100 DDR
1
230534-B21
40G 7.2K NHP ATA ALL
1
343791-B21
DL320/DL360 DVD/CDRW FLPY ALL
1
174574-B21
3rd PTYRK DL360G1/320 ALL (optional)
(001) with the codes as follows: 011 = Australia, 291 = Japan, 421 = Europe, and 371 = ADP.
HP DL320-G2 Server with Pentium 4 3060-MHz Processor
The DL320-G2 is a high-performance server platform designed for today’s unified communications applications.
When clustered properly, 4,000 Cisco Unified CallManager or Cisco Unified Communications Manager users can
be supported. The required processor is an Intel Pentium 4 3.06-GHz processor. No specific memory
configuration is required as long as 1 GB of memory is provided.
Note that HP has discontinued sale of this configuration. Table 6 is only for reference to help you identify which
configuration you have deployed.
Table 6.
Components of HP DL320-G2
Quantity
HP Part Number
Description
1
336549-001
DL320R02 P3.06/533 512 A1 US
2
287496-B21
512MB x 1 REG PC2100 DDR
1
230534-B21
40G 7.2K NHP ATA ALL
1
343791-B21
DL320/DL360 DVD/CDRW FLPY ALL
1
174574-B21
3rd PTYRK DL360G1/320 ALL (optional)
HP DL320-G3 Server with Pentium 4 3.4-GHz Processor
The DL320-G3, which requires Cisco OS 2000.4.1, is a high-performance server platform for today’s unified
communications applications. It supports up to 1,000 Cisco Unified IP Phones on a single server and up to 4,000
Cisco Unified IP Phones when clustered properly. The required processor is an Intel Pentium 4 3.4-GHz
processor. No specific memory configuration is required as long as 2 GB of memory is provided.
Note that HP has discontinued sale of this configuration. Table 7 is only for reference to help you identify which
configuration you have deployed.
Table 7.
Components of HP DL320-G3
Quantity
HP Part Number
Description
1
370669-001
DL320R03 P3.4-1MB, 1GB, 80GB SATA
1
354563-B21
1GB UNREG PC3200 1X1GB Memory
1
349237-B21
80-GB SATA 1.5-Gb 7,200-RPM Hard Drive (1")
1
374303-B21
DL320G3 DVD-ROM Drive
1
372702-B21
DL320G3 FLOPPY DRIVE (Required for installation of SW SATA RAID)
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 7 of 21
HP DL320-G4 Server with Pentium D 2.8-GHz Processor
The DL320-G4, which requires Cisco Windows OS 2000.4.3 or Cisco Unified Communications Manager 5.0.3, is a
high-performance server platform for today’s unified communications applications. It supports up to 1,000 Cisco
Unified IP Phones on a single server and up to 4,000 Cisco Unified IP Phones when clustered properly. The
required processor is an Intel Pentium D 2.8-GHz processor. No specific memory configuration is required as long
as 2 GB of memory is provided. This server is the configuration equivalent of the Cisco MCS 7825-H2-IPC1.
Note that HP has discontinued sale of this configuration. Table 8 is only for reference to help you identify which
configuration you have deployed.
Table 8.
Components of HP DL320-G4
Quantity
HP Part Number
Description
1
410785-001 or
418307-291 (Japan Only)
DL320G4 P920 Model 80
1
390824-B21
1GB DDR II 533 MHz/PC2-4200
1
349237-B21
80-GB SATA 1.5-Gb 7,200-RPM Hard Drive (1")
1
374303-B21
DL320G3 DVD-ROM Drive
HP DL320-G4 Server with Intel 950 3.4-GHz Processor
The DL320-G4, which requires Cisco Windows OS 2000.4.4 or Cisco Unified Communications Manager 5.1.1, is a
high-performance server platform for today’s unified communications applications. It supports up to 1,000 Cisco
Unified IP Phones on a single server and up to 4,000 Cisco Unified IP Phones when clustered properly. The
required processor is an Intel 950 3.4-GHz processor. No specific memory configuration is required as long as 2
GB of memory is provided. This server does not support Cisco Unified Communications Manager 5.0. It is the
configuration equivalent of the Cisco MCS 7825-H2-IPC2.
Note that HP has discontinued sale of this configuration. Table 9 is only for reference to help you identify which
configuration you have deployed.
Table 9.
Components of HP DL320-G4
Quantity
HP Part Number
Description
1
434769-001
DL320G4 P950 A1 Server (includes 1 x 1-GB RAM)
1
390824-B21
1GB DDR II 533 MHz/PC2-4200
2
349237-B21
80-GB SATA 1.5-Gb 7,200-RPM Hard Drive (1")
1
374303-B21
DL320G4 DVD-ROM Drive
HP DL320-G5 Server with Intel 3050 Xeon 2.13-GHz Processor
The DL320-G5, which requires Cisco Windows OS 2000.4.5, Cisco Windows OS 2003.1.2, or Cisco Unified
Communications Manager 6.0.1, is a high-performance server platform for today’s unified communications
applications. It supports up to 1,000 Cisco Unified IP Phones on a single server and up to 4,000 Cisco Unified IP
Phones when clustered properly. The required processor is an Intel 3050 Xeon 2.13-GHz processor. No specific
memory configuration is required as long as 2 GB of memory is provided. This server does not support Cisco
Unified Communications Manager 5.0. It is the configuration equivalent of the Cisco MCS 7825-H3.
Note that HP has discontinued sale of this configuration. Tables 10 and 11 are only for reference to help you
identify which configuration you have deployed.
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 8 of 21
Table 10.
Components of HP DL320-G5
Quantity
HP Part Number
Description
1
415405-B21
HP DL320G5 MOD-FX Svr
1
419400-L21
HP DL320G5 Xeon 3050 FIO Kit
2
432804-B21
HP 1GB UB PC2-5300 1x1GB KIT ALL
2
349238-B21
HP 160GB 1" 7.2K SATA 1yr Wty HDD
1
374303-B21
HP DL320G3/G4 DVD-ROM Drive OPT
Table 11.
Components of HP DL320-G5 if Ordered Directly from HP Reseller
Quantity
HP Part Number
Description
1
418044-001
DL320 G5 X3050/1GB/80GB SATA
1
432804-B21
HP 1GB UB PC2-5300 1x1GB KIT ALL
2
349238-B21
HP 160GB 1" 7.2K SATA 1yr Wty HDD
1
374303-B21
DL320G4 DVD-ROM Drive
Compaq DL380 Server with Pentium III 1000-MHz Processor
The DL380 is a robust server solution designed for Cisco Unified Communications software applications. When
clustered properly, 10,000 users can be supported using the DL380 Pentium III 1000-MHz processor. The
required processor is an Intel Pentium III 1-GHz processor. No specific memory configuration is required as long
as 1 GB of memory is provided.
Note that HP has discontinued sale of this configuration. Table 12 is only for reference to help you identify which
configuration you have deployed.
Table 12.
Components of Compaq DL380
Quantity
Compaq Part Number
Description
1
193706-001
ProLiant DL380R01 P1000/133-128
1
142673-B22
18.2GB Pluggable Wide Ultra SCSI3 Universal 10K Drive
1
128279-B21
512MB Registered 133-MHz SDRAM DIMM
1
128278-B21
256MB Registered 133-MHz SDRAM DIMM
1
128277-B21
128MB Registered 133-MHz SDRAM DIMM
1
143397-001
DL380 275-Watt HP RPS Module
1
295513-B22
12/24-Gigabyte DAT Drive (DDS-3) -Opal (Optional)
Compaq DL380 G2 Server with Pentium III 1266-MHz Processor
The DL380-G2 is a robust server solution designed for Cisco Unified Communications software applications.
When clustered properly, 10,000 Cisco Unified CallManager or Cisco Unified Communications Manager users can
be supported. The required processor is an Intel Pentium III 1.266-GHz processor. No specific memory
configuration is required as long as 1 GB of memory is provided.
Note that HP has discontinued sale of this configuration. Table 13 is only for reference to help you identify which
configuration you have deployed.
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 9 of 21
Table 13.
Components of Compaq DL380-G2
Quantity
Compaq Part Number
Description
1
235438-001
DL380R02 P1266 512 US
2
142673-B22
18.2-GB Pluggable Ultra3 SCSI 10K rpm HDD
1
201694-B21
1024-MB PC133-MHz ECC SDRAM Memory (2 x 512 MB)
1
225011-001
DL380 G2 Hot Plug Redundant Power Supply US
1
228894-B21
3rd Party Rack MTG Kit-DL380 (Optional)
1
215488-B21
20/40-GB DAT, HOT PLUG (Optional)
HP DL380-G2 Server with Pentium III 1400 Processor
The DL380-G2 is a robust server solution designed for Cisco Unified Communications software applications.
When clustered properly, 10,000 Cisco Unified Communications Manager users can be supported. The required
processor is an Intel Pentium III 1.4-GHz processor. No specific memory configuration is required as long as 1 GB
of memory is provided.
Note that HP has discontinued sale of this configuration. Table 14 is only for reference to help you identify which
configuration you have deployed.
Table 14.
Components of HP DL380-G2
Quantity
Compaq Part Number
Description
1
253864-001
ProLiant DL380R02 P1400 512 US
2
142673-B22
18.2-GB Pluggable Ultra3 SCSI 10K rpm HDD
1
201694-B21
1024-MB PC133-MHz ECC SDRAM Memory (2 x 512 MB)
1
225011-001
DL380 G2 Hot Plug Redundant Power Supply US
1
228894-B21
3rd Party Rack MTG Kit-DL380 (Optional)
1
215488-B21
20/40-GB DAT, HOT PLUG (Optional)
HP DL380-G3 Server with Xeon 2400 Processor
The DL380-G3 is a robust server solution designed for Cisco Unified Communications software applications.
When clustered properly, 10,000 Cisco Unified Communications Manager users can be supported. The required
processor is an Intel Xeon 2.4-GHz processor. No specific memory configuration is required as long as 1 GB of
memory is provided.
Note that HP has discontinued sale of this configuration. Table 15 is only for reference to help you identify which
configuration you have deployed.
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 10 of 21
Table 15.
Components of HP DL380-G3
Quantity
Compaq Part Number
Description
1
257917-001
DL380 R03 P2400 US
2
286713-B22 or
286776-B22
36GB 10K U320 UNI HDD ALL
1
264007-B21
DVDROM DRV SLIM 8/24X ALL
1
300678-B21
512-MB REG PC2100 2X256 ALL
1
293052-B21
3rd Party Rack DL380G3 ALL
1
313054-001
HP RPS DL380 G3 US (US Power Supply)
1
313045-B21
HP RPS DL380 G3 WW (Non-US Power Supply)
1
215488-B21
20/40-GB HP DAT Drive (optional)
36GB 15K U320 UNI HDD ALL
HP DL380-G3 Server with Xeon 3060 Processor
The DL380-G3 is a robust server solution designed for Cisco Unified Communications software applications.
When clustered properly, 10,000 Cisco Unified Communications Manager users can be supported. The required
processor is an Intel Xeon 3.06-GHz processor. No specific memory configuration is required as long as 1 GB of
memory is provided.
Note that HP has discontinued sale of this configuration. Table 16 is only for reference to help you identify which
configuration you have deployed.
Table 16.
Components of HP DL380-G3
Quantity
HP Part Number
Description
1
310587-001
DL380R03 X3.06-512KB/533-1GB
2
286713-B22 or
286776-B22
36-GB 10K U320 UNI HDD ALL
1
331903-B21
COMBO DRV 24X SLIM CARBON ALL
1
293052-B21
3rd Party Rack DL380G3 ALL
1
313054-001
HP RPS DL380 G3 US (US Power Supply)
1
313045-B21
HP RPS DL380 G3 WW (Non-US Power Supply)
1
215488-B21
20/40-GB HP DAT Drive (optional)
36-GB 15K U320 UNI HDD ALL
HP DL380-G4 Server with Xeon 3.4-GHz Processor
The DL380-G4, which requires Cisco OS 2000.2.7, is a robust server solution designed for Cisco Unified
Communications software applications. When clustered properly, 10,000 Cisco Unified Communications Manager
users can be supported. The required processor is an Intel Xeon 3.4-GHz processor. No specific memory
configuration is required as long as 2 GB of memory is provided.
Note that HP has discontinued sale of this configuration. Table 17 is only for reference to help you identify which
configuration you have deployed.
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 11 of 21
Table 17.
Components of HP DL380-G4
Quantity
HP Part Number
1
311143-001
DL380R04 X3.4/800-1M US
1
343056-B21
2-GB (2x1GB) PC3200 DDR2
2
286778-B22
72-GB U320 15KRPM HDDs
1
264007-B21
Slimline DVD-ROM Option Kit
1
364507-B21
DL380G4 FLPY DRV w/BRKTS ALL
1
355892-B21
HP RPS DL380 G4 ALL
1
346914-B21
BBWC Enabler for SA6i+
1
293048-B21
DL 380 G3 Redundant Fan Option Kit.
1
215488-B21
20/40-GB HP DAT Drive (optional)
*
Description
HP DL380-G4 Server with Xeon 3.4-GHz Processor
The DL380-G4, which requires Cisco Windows OS 2000.4.3 or Cisco Unified Communications Manager 5.0.3, is a
robust server solution designed for Cisco Unified Communications software applications. When clustered properly,
10,000 Cisco Unified Communications Manager users can be supported. The required processor is an Intel Xeon
3.4-GHz processor. No specific memory configuration is required as long as 2 GB of memory is provided. This
server is the configuration equivalent of the Cisco MCS 7835-H1.
Note that HP has discontinued sale of this configuration. Table 18 is only for reference to help you identify which
configuration you have deployed.
Table 18.
Components of HP DL380-G4
Quantity
HP Part Number
Description
1
378737-001
DL380R04 X3.4/800 2M US
1
343056-B21
2-GB (2 x 1-GB) PC3200 DDR2
2
286778-B22
72-GB U320 15K RPM HDDs
1
264007-B21
Slimline DVD-ROM Option Kit
1
364507-B21
DL380G4 FLPY DRV w/BRKTS ALL
1
355892-B21 or
355892-001 (Japan only)
HP RPS DL380 G4 ALL
1
346914-B21
BBWC Enabler for SA6i+
1
293048-B21
DL 380 G3 Redundant Fan Option Kit
1
*
378737-001
DL380R04 X3.4/800 2M US
HP DL380-G5 Server with Xeon 5140 2.33-GHz Processor
The DL380-G5, which requires Cisco Windows OS 2000.4.4 or Cisco Unified Communications Manager 5.1.1(b),
is a robust server solution designed for Cisco Unified Communications software applications. When clustered
properly, 10,000 Cisco Unified Communications Manager users can be supported. The required processor is an
Intel Xeon 5140 2.33-GHz processor. No specific memory configuration is required as long as 2 GB of memory is
provided. This server does not support Cisco Unified Communications Manager 5.0. It is the configuration
equivalent of the Cisco MCS 7835-H2.
Note that HP has discontinued sale of this configuration. Table 19 is only for reference to help you identify which
configuration you have deployed. This configuration used to be sold as HP PN 740064-770.
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 12 of 21
Table 19.
Components of Part Number 740064-770
Quantity
Description
1
HP ProLiant DL380G5 Rack Chassis
1
Dual-core Intel Xeon Processor 5140 (2.33 GHz, 1333 FSB)
1
2GB FBD PC2-5300 2 x 1 GB Kit
1
P400/256 for DL380 G5/DL385 G2 FIO
1
Battery-backed write cache upgrade
2
HP 72 GB SAS 10,000 rpm Hard Drive (2.5")
1
Slimline DVD-ROM Drive (8X/24X) Option Kit (servers)
1
Redundant Power Supply 350/370/380 G5 US Kit
HP DL380-G2 Server with Dual Pentium III 1400-MHz Processor
The DL380-G2 is a robust server solution designed for Cisco Unified Communications software applications. Up to
7,500 IP phones can be supported on a single server running Cisco CallManager or Cisco Unified
Communications Manager. The required processors are dual Intel Pentium III 1.4-GHz processors. No specific
memory configuration is required as long as 2 GB of memory is provided.
Note that HP has discontinued sale of this configuration. Table 20 is only for reference to help you identify which
configuration you have deployed.
Table 20.
Components of HP DL380-G2
Quantity
Compaq Part Number
Description
1
253864-001
ProLiant DL380R02 P1.40GHz-512KB
1
201099-B21
1.40-GHz PIII Processor Option Kit (DL380 G2)
4
232432-B22
72-GB 1-in. U3 Hot Plug 10K RPM Universal SCSI Hard Drive
1
201695-B21
2-GB 133-MHz SDRAM DIMM Memory (2x1GB)
**
1
225011-001
DL380 G2 Hot Plug Redundant Power Supply US
1
228894-B21
3rd Party Rack MTG Kit-DL380 (Optional)
1
215488-B21
20/40-GB DAT, HOT PLUG (Optional)
HP DL380-G3 Server with Dual Xeon 2.4-GHz Processors
The DL380-G3 is a robust server solution designed for Cisco Unified Communications software applications. Up to
7,500 IP phones can be supported on a single server running Cisco CallManager or Cisco Unified
Communications Manager. The required processors are dual Intel Xeon 2.4-GHz processors. No specific memory
configuration is required as long as 4 GB of memory is provided.
Note that HP has discontinued sale of this configuration. Table 21 is only for reference to help you identify which
configuration you have deployed.
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 13 of 21
Table 21.
Components of HP DL380-G3
Quantity
HP Part Number
Description
1
257917-001
DL380 R03 P2400 US
1
257913-B21
X2.4/400 370/380 G3 ALL
4
286714-B22
72GB 10K U320 UNI HDD ALL
1
264007-B21
DVDROM DRV SLIM 8/24X ALL
2
300679-B21
1-GB REG PC2100 2X512 ALL
1
300680-B21
2-GB REG PC2100 2x1024 ALL
1
293052-B21
3rd Party Rack DL380G3 ALL
1
293048-B21
FAN HP RED DL380G3 ALL
1
313054-001
HP RPS DL380 G3 US (US Only)
1
313045-B21
HP RPS DL380 G3 WW (Non-US Power Supply)
1
215488-B21
20/40-GB HP DAT Drive (optional)
HP DL380-G3 Server with Dual Xeon 3.06-MHz Processors
The DL380-G3 is a robust server solution designed for Cisco Unified Communications software applications. Up to
7,500 IP phones can be supported on a single server running Cisco CallManager or Cisco Unified
Communications Manager. The required processors are dual Intel Xeon 2.4-GHz processors. No specific memory
configuration is required as long as 4 GB of memory is provided.
Note that HP has discontinued sale of this configuration. Table 22 is only for reference to help you identify which
configuration you have deployed.
Table 22.
Components of HP DL380-G3
Quantity
HP Part Number
Description
1
310587-001
DL380R03 X3.06-512-KB/533-1GB
1
257916-B21
X3.06/533 370/380G3 ALL
4
286714-B22
72-GB 10K U320 UNI HDD ALL
1
331903-B21
COMBO DRV 24X SLIM CARBON ALL
1
300679-B21
1-GB REG PC2100 2X512 ALL
1
300680-B21
2-GB REG PC2100 2x1024 ALL
1
293052-B21
3rd Party Rack DL380G3 ALL
1
293048-B21
FAN HP RED DL380G3 ALL
1
313054-001
HP RPS DL380 G3 US (US Only)
1
313045-B21
HP RPS DL380 G3 WW (Non-US Power Supply)
1
215488-B21
20/40-GB HP DAT Drive (optional)
1
255514-B21
Battery Backed Write Cache Enabler Kit
HP DL380-G4 Server with Dual Xeon 3.4-GHz Processors
The DL380-G4, which requires Cisco OS 2000.2.7, is a robust server solution designed for Cisco Unified
Communications software applications. Up to 7,500 Cisco Unified IP Phones can be supported on a single server
running Cisco CallManager or Cisco Unified Communications Manager. The required processors are dual Intel
Xeon 3.4-GHz processors. No specific memory configuration is required as long as 4 GB of memory is provided.
Note that HP has discontinued sale of this configuration. Table 23 is only for reference to help you identify which
configuration you have deployed.
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 14 of 21
Table 23.
Components of HP DL380-G4
Quantity
HP Part Number
Description
1
311143-001
DL380R04 X3.4/800-1M US
1
311583-B21
X3.4/800-1M 370/380 G4 ALL
2
343056-B21
2-GB (2x1GB) PC3200 DDR2
1
264007-B21
Slimline DVD-ROM Option Kit
1
364507-B21
DL380G4 FLPY DRV w/BRKTS ALL
4
286778-B22
72-GB U320 15KRPM HDDs
1
355892-B21
HP RPS DL380G4 ALL
1
346914-B21
BBWC Enabler for SA6i+
1
203048-B21
DL380 G3 Redundant Fan Option Kit
1
215488-B21
20/40-GB HP DAT Drive (optional)
HP DL380-G4 Server with Dual Xeon 3.4-GHz Processors
The DL380-G4, which requires Cisco Windows OS 2000.4.3 or Cisco Unified Communications Manager 5.0.3, is a
robust server solution designed for Cisco Unified Communications software applications. Up to 7,500 Cisco
Unified IP Phones can be supported on a single server running Cisco CallManager or Cisco Unified
Communications Manager. The required processors are dual Intel Xeon 3.4-GHz processors. No specific memory
configuration is required as long as 4 GB of memory is provided. This server is the configuration equivalent of the
Cisco MCS 7845-H1.
Note that HP has discontinued sale of this configuration. Table 24 is only for reference to help you identify which
configuration you have deployed.
Table 24.
Components of HP DL380-G4
Quantity
HP Part Number
Description
1
378737-001
DL380R04 X3.4/800 2M US
1
378750-B21
X3.4/800 2M 370/380 G4 ALL
2
343056-B21
2-GB (2x1GB) PC3200 DDR2
1
264007-B21
Slimline DVD-ROM Option Kit
1
364507-B21
DL380G4 FLPY DRV w/BRKTS ALL
4
286778-B22
72-GB U320 15KRPM HDDs
1
355892-B21 or
355892-001 (Japan only)
HP RPS DL380G4 ALL
1
346914-B21
BBWC Enabler for SA6i+
1
293048-B21
DL380 G3 Redundant Fan Option Kit
HP DL380-G5 Server with Xeon 5140 2.33-GHz Processor
The DL380-G5, which requires Cisco Windows OS 2000.4.4 or Cisco Unified Communications Manager 5.1.1(b),
is a robust server solution designed for Cisco Unified Communications software applications. When clustered
properly, 10,000 Cisco Unified Communications Manager users can be supported. The required processor is an
Intel Xeon 5140 2.33-GHz processor. No specific memory configuration is required as long as 2 GB of memory is
provided. This server does not support Cisco Unified Communications Manager 5.0. It is the configuration
equivalent of the Cisco MCS 7835-H2.
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 15 of 21
Note that HP has discontinued sale of this configuration. Table 25 is only for reference to help you identify which
configuration you have deployed.
Table 25.
Components of HP DL380-G5
Quantity
HP Part Number
Description
1
417456-001
HP DL380G5 5140 2G (includes server, proc, 2 x 1-GB RAM, P400/256, 1 RPS
1
383280-B21
Battery-backed write cache upgrade
2
375861-B21
HP 72 GB SAS 10,000-rpm Hard Drive (2.5")
1
264007-B21
Slimline DVD-ROM Option Kit
1
399771-001
Redundant Power Supply 350/370/380 G5 US Kit (IEC cord only)
1
410570-B21
PCI-X/E Mixed Riser Option (DL380G5)
HP DL380-G5 Server with Dual Xeon 5140 2.33-GHz Processors
The DL380-G5, which requires Cisco Windows OS 2000.4.4 or Cisco Unified Communications Manager 5.1.1(b),
is a robust server solution designed for Cisco Unified Communications software applications. Up to 7,500 Cisco
Unified IP Phones can be supported on a single server running Cisco CallManager or Cisco Unified
Communications Manager. The required processors are dual Intel Xeon 5140 2.33-GHz processors. No specific
memory configuration is required as long as 4 GB of memory is provided. This server does not support Cisco
Unified Communications Manager 5.0. It is the configuration equivalent of the Cisco MCS 7845-H2.
Note that HP has discontinued sale of this configuration. Table 26 is only for reference to help you identify which
configuration you have deployed.
Table 26.
Components of HP DL380-G5
Quantity
HP Part Number
Description
1
417456-001
HP DL380G5 5140 2G (includes server, proc, 2 x 1-GB RAM, P400/256, 1RPS
1
418322-B21
Dual-core Intel Xeon 5140 Processor (2.33 GHz, 1333 FSB)
1
397411-B21
2 GB FBD PC2-5300 2 x 1-GB Kit (2-GB RAM additional for 4 GB total for config)
1
383280-B21
Battery-backed write cache upgrade
4
375861-B21
HP 72 GB SAS 10,000 rpm Hard Drive (2.5 in.)
1
264007-B21
Slimline DVD-ROM Drive (8X/24X) Option Kit (Servers)
1
399771-B21
Redundant Power Supply 350/370/380 G5 US Kit (IEC cord only)
1
410570-B21
PCI-X/E Mixed Riser Option (DL380G5)
HP DL380-G5 Server with Dual Xeon 5140 2.33-GHz Processors
The DL380-G5, which requires Cisco Windows OS 2000.4.4 or Cisco Unified Communications Manager 5.1.1(b),
is a robust server solution designed for Cisco Unified Communications software applications. Up to 7,500 Cisco
Unified IP Phones can be supported on a single server running Cisco CallManager or Cisco Unified
Communications Manager. The required processors are dual Intel Xeon 5140 2.33-GHz processors. No specific
memory configuration is required as long as 4 GB of memory is achieved. This server does not support Cisco
Unified Communications Manager 5.0. It is the configuration equivalent of the Cisco MCS 7845-H2.
Note that HP has discontinued sale of this configuration. Table 27 is only for reference to help you identify which
configuration you have deployed. This configuration used to be sold as HP PN 740064-771.
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 16 of 21
Table 27.
Components of Part Number 740064-771
Quantity
Description
1
HP ProLiant DL380G5 Rack Chassis
1
Dual-core Intel Xeon Processor 5140 (2.33 GHz, 1333 FSB)
1
Dual-core Intel Xeon 5140 Processor (2.33 GHz, 1333 FSB)
2
2 GB FBD PC2-5300 2 x 1 GB Kit
1
P400/256 for DL380 G5/DL385 G2 FIO
1
Battery-backed write cache upgrade
4
HP 72 GB SAS 10,000 rpm Hard Drive (2.5")
1
Slimline DVD-ROM Drive (8X/24X) Option Kit (Servers)
1
Redundant Power Supply 350/370/380 G5 US Kit
HP DL380-G5 Server with Dual Xeon 5140 2.33-GHz Processors and 146-GB Hard Drives
The DL380-G5 is a robust server solution designed for Cisco Unified Communications software applications.
When configured properly for Cisco Unified Communications Manager, up to 7,500 devices on a single server and
up to 30,000 devices per cluster can be supported. No specific memory configuration is required as long as 4 GB
of memory is provided (note that some product versions may require more memory).
Note that HP has discontinued sale of this configuration. Table 28 is only for reference to help you identify which
configuration you have deployed. This configuration was originally sold as HP PN 470064-887.
Table 28.
Components of Part Number 470064-887
Quantity
Description
1
HP ProLiant DL380G5 Rack Chassis
1
Dual-core Intel Xeon Processor 5140 (2.33 GHz, 1333 FSB)
1
Dual-core Intel Xeon 5140 Processor (2.33 GHz, 1333 FSB)
2
2 GB FBD PC2-5300 2 x 1 GB Kit
1
P400/256 for DL380 G5/DL385 G2 FIO
1
Battery-backed write cache upgrade
4
HP 146 GB SAS 10,000 rpm Hard Drive (2.5")
1
Slimline DVD-ROM Drive (8X/24X) Option Kit (Servers)
1
Redundant Power Supply 350/370/380 G5 US Kit
HP DL380-G5 Server with Dual Xeon Quad-Core E5345 2.33-GHz Processors and 146-GB Hard Drives
The DL380-G5 is a robust server solution designed only for Cisco Unified Contact Center and messaging
products. The required processors are dual Intel Xeon quad-core E5345 2.33-GHz processors. No specific
memory configuration is required as long as 4 GB of memory is provided (note that some product versions may
require more memory).
Note that HP has discontinued sale of this configuration. Tables 29 and 30 are only for reference to help you
identify which configuration you have deployed. These configurations were originally sold as HP PN AR111A and
AR109A.
Table 29.
Components of Part Number AR111A (equivalent of Cisco MCS 7845-H2-ECS3/CCE3)
Quantity
Description
1
HP ProLiant DL380G5 Rack Chassis
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 17 of 21
1
Quad-Core Intel Xeon Processor E5345 (2.33 GHz, 80 Watts, 1333 FSB) DL380 G5 FIO Kit 1
1
Quad-Core Intel Xeon Processor E5345 (2.33 GHz, 80 Watts, 1333 FSB) DL380 G5 Opt Kit 1
2
2 GB FBD PC2-5300 2 x 1 GB Kit
1
P400/256 for DL380 G5/DL385 G2 FIO
1
Battery-backed write cache upgrade
4
HP 146 GB SAS 10,000 rpm Hard Drive (2.5")
1
Slimline DVD-ROM Drive (8X/24X) Option Kit (Servers)
1
Redundant Power Supply 350/370/380 G5 US Kit
Table 30.
Components of Part Number AR109A (equivalent of Cisco MCS 7845-H2-ECS4/CCE4)
Quantity
Description
1
HP ProLiant DL380G5 Rack Chassis
1
Quad-Core Intel(r) Xeon(r) Processor E5345 (2.33 GHz, 80 Watts, 1333 FSB) DL380 G5 FIO Kit 1
1
Quad-Core Intel(r) Xeon(r) Processor E5345 (2.33 GHz, 80 Watts, 1333 FSB) DL380 G5 Opt Kit 1
2
2 GB FBD PC2-5300 2 x 1 GB Kit
1
P400/256 for DL380 G5/DL385 G2 FIO
1
Battery-backed write cache upgrade
8
HP 146 GB SAS 10,000 rpm Hard Drive (2.5")
1
Slimline DVD-ROM Drive (8X/24X) Option Kit (Servers)
1
Redundant Power Supply 350/370/380 G5 US Kit
HP DL380-G5 Server with Single Xeon 5140 2.33-GHz Processor and 146-GB Hard Drives
The DL380-G5 is a robust server solution designed for Cisco Unified Communications software applications.
When configured properly for Cisco Unified Communications Manager, up to 2,500 devices on a single server and
up to 10,000 devices per cluster can be supported. No specific memory configuration is required as long as 2 GB
of memory is provided (note that some product versions may require more memory).
Note that HP has discontinued sale of this configuration. Table 31 is only for reference to help you identify which
configuration you have deployed. This configuration was originally sold as HP PN 470064-880.
Table 31.
Components of Part Number 470064-880
Quantity
Description
1
HP ProLiant DL380G5 Rack Chassis
1
Dual-core Intel Xeon Processor 5140 (2.33 GHz, 1333 FSB)
1
2GB FBD PC2-5300 2 x 1 GB Kit
1
P400/256 for DL380 G5/DL385 G2 FIO
1
Battery-backed write cache upgrade
2
HP 146 GB SAS 10,000 rpm Hard Drive (2.5")
1
Slimline DVD-ROM Drive (8X/24X) Option Kit (servers)
1
Redundant Power Supply 350/370/380 G5 US Kit
HP DL380-G5 Server with Single Xeon 5140 2.33-GHz Processor
This server configuration is identical to the HP DL380-G5 server with a single Xeon 5140 2.33-GHz processor and
146-GB hard drives, except that this configuration uses 72-GB hard drives and supports different versions of the
IP telephony OS and Cisco Unified Communications Manager. Note that Cisco Unified Communications Manager
5.0 is not supported on this model. It is the configuration equivalent of the Cisco MCS 7835-H2.
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 18 of 21
Note that HP has discontinued sale of this configuration. Table 32 is only for reference to help you identify which
configuration you have deployed. This configuration used to be sold as HP PN 470064-770.
Table 32.
Components of Part Number 470064-770
Quantity
Description
1
HP ProLiant DL380G5 Rack Chassis
1
Dual-core Intel Xeon Processor 5140 (2.33 GHz, 1333 FSB)
1
2GB FBD PC2-5300 2 x 1 GB Kit
1
P400/256 for DL380 G5/DL385 G2 FIO
1
Battery-backed write cache upgrade
2
HP 72 GB SAS 10,000 rpm Hard Drive (2.5")
1
Slimline DVD-ROM Drive (8X/24X) Option Kit (servers)
1
Redundant Power Supply 350/370/380 G5 US Kit
HP DL380-G5 Server with Dual Xeon 5140 2.33-GHz Processors
This server configuration is identical to the HP DL380-G5 server with dual Xeon 5140 2.33-GHz processors and
146-GB hard drives, except that this configuration uses 72-GB hard drives and supports different versions of the
IP telephony OS and Cisco Unified Communications Manager. Note that Cisco Unified Communications Manager
5.0 is not supported on this model. It is the configuration equivalent of the Cisco MCS 7845-H2.
Note that HP has discontinued sale of this configuration. Table 33 is only for reference to help you identify which
configuration you have deployed. This configuration used to be sold as HP PN 470064-771.
Table 33.
Components of Part Number 470064-771
Quantity
Description
1
HP ProLiant DL380G5 Rack Chassis
1
Dual-core Intel Xeon Processor 5140 (2.33 GHz, 1333 FSB)
1
Dual-core Intel Xeon 5140 Processor (2.33 GHz, 1333 FSB)
2
2 GB FBD PC2-5300 2 x 1 GB Kit
1
P400/256 for DL380 G5/DL385 G2 FIO
1
Battery-backed write cache upgrade
4
HP 72 GB SAS 10,000 rpm Hard Drive (2.5")
1
Slimline DVD-ROM Drive (8X/24X) Option Kit (Servers)
1
Redundant Power Supply 350/370/380 G5 US Kit
HP DL380-G6 Server with Single Quad-Core E5504 2.00-GHz Processor and 146-GB Hard Drives
The DL380-G6 is a robust server solution designed for Cisco Unified Communications software applications.
When configured properly for Cisco Unified Communications Manager, up to 2,500 devices on a single server and
up to 10,000 devices per cluster can be supported. No specific memory configuration is required as long as 4 GB
of memory is provided.
Note that HP has discontinued sale of this configuration. Table 34 is only for reference to help you identify which
configuration you have deployed. This configuration used to be sold as HP PN AX690A.
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 19 of 21
Table 34.
Components of Part Number AX690A
Quantity
Description
1
HP DL380G6 CTO Chassis
1
2.00Ghz Nehalem E5504 Processor FIO
2
HP 2GB 2Rx8 PC3-10600R-9 Kit
2
HP 146GB 10K 6G 2.5 SAS DP HDD
2
HP 1200W CS HE Power Supply Kit
1
HP Slim SATA DVD-ROM Optical Drive
1
HP 256 MB P-series cache module FIO
1
HP 650 mAh P-Series Battery
1
HP iLO Adv 1-Svr incl 1yr TS&U SW
1
HP Trusted Platform Module Option Kit
1
HP V100W 8GB USB flash drive 2.0
HP DL380-G6 Server with Single Quad-Core E5540 2.53-GHz Processor and 146-GB Hard Drives
The DL380-G6 is a robust server solution designed for Cisco Unified Communications software applications.
When configured properly for Cisco Unified Communications Manager, up to 7,500 devices on a single server and
up to 30,000 devices per cluster can be supported. No specific memory configuration is required as long as 6 GB
of memory is provided.
Note that HP has discontinued sale of this configuration. Table 35 is only for reference to help you identify which
configuration you have deployed. This configuration was originally sold as HP PN AX691A.
Table 35.
Components of Part Number AX691A
Quantity
Description
1
HP DL380G6 CTO Chassis
1
2.53Ghz Nehalem E5540 Processor FIO
3
HP 2GB 2Rx8 PC3-10600R-9 Kit
4
HP 146GB 10K 6G 2.5 SAS DP HDD
2
HP 1200W CS HE Power Supply Kit
1
HP Slim SATA DVD-ROM Optical Drive
1
HP 256 MB P-series cache module FIO
1
HP 650 mAh P-Series Battery
1
HP iLO Adv 1-Svr incl 1yr TS&U SW
1
HP Trusted Platform Module Option Kit
1
HP V100W 8GB USB flash drive 2.0
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 20 of 21
HP Tape Drives
Cisco supports certain models of USB-attached DAT tape drives for software backups to a local tape instead of to
a network location. These tapes drives are supported with select models of Cisco MCS 7800 Series Media
Convergence Servers. These tape drives were formerly sold as Cisco part numbers DAT-USB-RM-72 and DATUSB-EXT-72.
Ordering instructions from HP: Please order from HP the part numbers of one of the supported models in
Table 36. These part numbers are orderable through HP or HP authorized resellers in all regions. For media for
these DAT drives, please consult: http://h18004.www1.hp.com/products/quickspecs/11843_div/11843_div.HTML.
Table 36.
Supported HP USB DAT Drives
HP Part Number
Description
Rack-mount tape drive
DW026A
DAT 72 USB Internal Tape Drive
A8007A
1U USB Rack-Mount Kit
External tape drive (free-standing)
DW027A
DAT 72 USB External Tape Drive
Printed in USA
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
C02-361412-19
07/12
Page 21 of 21