INSTALLATION
INSTRUCTIONS
P/C
W-ID-L65
FIXTURE ASSEMBLY
FIXTURE TYPE_______
510633-0000
PG.
DATE: MM/DD/YY
1
OF
.58
1
DO NOT MODIFY OR ALTER THIS PRODUCT IN ANY WAY, OR INSTALL IN ANY FASHION
WHICH IS CONTRARY TO THE INSTRUCTIONS CONTAINED HEREIN.
IF YOU HAVE ANY QUESTIONS REGARDING THIS PRODUCT OR THE INSTALLATION OF IT,
PLEASE CALL LITECONTROL ENGINEERING AT 781-294-0100.
WALL BRACKET
COVER
OUTLET
BOX
3.04
INSTRUCTIONS (READ ALL INSTRUCTIONS BEFORE INSTALLATION)
1.6250
1.56
1. REFER TO VIEWS FOR LOCATIONS OF WALL MOUNTING BRACKET(S).
2. NOTE WALL BRACKET(S) (W-ID-L65-WALL BRKT, ARE SHIPPED SEPARATELY)
SHOULD BE MOUNTED PRIOR TO INSTALLING FIXTURE(S). REFER TO MTG DETAILS
(2) BRACKETS ARE REQUIRED FOR ALL FIXTURE LENGTHS
3. REMOVE LED REFLECTOR ASSY(S) OUT OF FIXTURE BY REMOVING #8 SHEET
METAL SCREWS.
6.8714
WALL REF.
CROSS SECTION
INSTRUCTIONS:
1. MARK A STRAIGHT LINE ON MOUNTING WALL AT CORRECT HEIGHT.CAREFULLY PREPOSITION BRACKETS ON WALL AT CORRECT DISTANCES FROM EACH OTHER AND MARK
LOCATIONS OF MOUNTING HOLES.
36.00",48.00",72.00" and 96.00"
2. WHEN ATTACHING WALL BRACKET TO AN OUTLET BOX USE EITHER A 2" X 4" HANDY BOX OR
A 4" OUTLET BOX WITH A PLASTER RING MOUNTED HORIZONTALLY. NOTE OUTLET BOX MUST
BE ADEQUATELY ATTACHED TO STRUCTURE FOR SUPPORTING FIXTURE WEIGHT.
#8 SMS
4.50
3. MOUNT THE FIRST AND LAST WALL BRACKET IN A ROW OF FIXTURES.
USE CORRECT ANCHORING TO INSURE THAT FIXTURE WILL NOT PULL AWAY FROM WALL WHEN
ATTACHED.RUN A STRING BETWEEN THESE TWO BRACKETS AND MOUNT ALL OTHER BRACKETS
BETWEEN THEM MAKING SURE THAT THEY ARE "FLUSH" WITH STRING.IF REQUIRED USE
SHIM(S) (SUPPLIED BY CONTRACTOR) BETWEEN WALL SURFACE
AND BACK OF BRACKETS. SEE VIEW ON PAGE 2.
WALL BRACKET
COVER
4.5000
END CAP
4. LIFT FIXTURES ONTO WALL BRACKETS THROUGH THE RECTANGULER CUTOUTS PROVIDED
IN THE HOUSING BACK. REFER TO ILLUSTRATIONS
5. BOLT FIXTURES TOGETHER USING THE 1/4-20 MACHINE SCREWS PROVIDED. LEVEL THE
FIXTURES USING THE 1/4-20 X 1" LG LEVELING MACHINE SCREWS PROVIDED INSIDE OF
THE WALL BRACKETS.
1/4-20 LEVELING
SCREW
6. REMOVE LED REFLECTOR MODULES TO ALLOW ACCESS FOR WIRING. MAKE ALL WIRING
CONNECTIONS.
BACK VIEW
7. RE-ATTACH LED REFLECTOR[S] USING CARE NOT TO OVER TIGHTEN TO AVOID UNREPAIRABLE
DAMAGE TO THE SCREW THREADS.
8. ATTACH ALL WALL BRACKET COVER[S] USING #8 SMS'S PROVIDED AS SHOWN. THE COVER
ONCE ATTACHED HOLDS THE FIXTURE ONTO THE WALL BRACKETS.
2.3280
FIXTURE
HOOKS
6.0000
2.4328
2.4328
.4919
1.1677
.5000
1.2500
1.8361
1.5625
litecontrol.com
WALL BRACKET
WALL BRACKET
DETAIL
2.3280
WALL BRACKET
ISOMETRIC
FORM B520140-4
INSTALLATION
INSTRUCTIONS
P/C
FIXTURE TYPE_______
W-ID-L65
FIXTURE ASSEMBLY
PG.
510633-0000
2
OF
2
DO NOT MODIFY OR ALTER THIS PRODUCT IN ANY WAY, OR INSTALL IN ANY FASHION
WHICH IS CONTRARY TO THE INSTRUCTIONS CONTAINED HEREIN.
IF YOU HAVE ANY QUESTIONS REGARDING THIS PRODUCT OR THE INSTALLATION OF IT,
PLEASE CALL LITECONTROL ENGINEERING AT 781-294-0100.
LEVELING
SCREWS
NOTE: FIXTURE LED REFLECTORS AND INTERNAL COMPONENTS
ARE NOT SHOWN FOR CLARITY PURPOSES.
#8 SMS
WALL BRACKET
COVER
8-32 HEX NUTS
HOUSING
CUTOUT'S
FOR WALL
BRACKET'S
CHAULK LINE
REMOVE LED RELECTOR
ASSEMBLY
FEED HOLE
1/4-20 HEX
SCREW ROW
MOUNTING
LEVELING
SCREW
OUTLET BOX
BY INSTALLER
FIXTURE
#8 SHEET
METAL SCREW
WALL
REF
END CAP
SCALE 1 : 8
litecontrol.com
FORM B520140-4