5925 148th Street West
Apple Valley, MN 55124
Phone: 800-321-4739
Fax: 952-891-1409
Submittal Information
www.wirsbo.com
EP ProPEX Reducing Tee
Submittal Information
Component
Project Information
Job Name:
Part No. Ordered:
Location:
Quantity Ordered:
P.O. Number:
Engineer:
Date Submitted:
Contractor:
Submitted By:
Mfg Rep:
Approved By:
Technical Data
Material
Max Temp (no pressure)
Max Use Temp/Pressure
UDEL® Polysulfone, 20% glass reinforced
320oF
o
210 F @ 150 psi
Product Information and Application Use
The EP ProPEX reducing tees are available for use in hot and cold domestic
potable water systems. These reducing tees are also approved for use in any
hydronic heating systems. Each end of the reducing tee is manufactured with
the Wirsbo ProPEX fitting for connections to hePEX plus or AQUAPEX tubing.
Ordering Information
√ Description
[
[
[
[
[
[
[
]
]
]
]
]
]
]
Reducing Tee, 3/4" PEX x 3/4" PEX x 1/2" PEX
Reducing Tee, 3/4" PEX x 1/2" PEX x 1/2" PEX
Reducing Tee, 3/4" PEX x 1/2" PEX x 3/4" PEX
Reducing Tee, 1" PEX x 3/4" PEX x 1" PEX
Reducing Tee, 1" PEX x 3/4" PEX x 3/4" PEX
Reducing Tee, 1" PEX x 1" PEX x 1/2" PEX
Reducing Tee, 1" PEX x 1" PEX x 3/4" PEX
Dimensional Information
Part Number
A
B
C
D
E
Q4707550
Q4707555
Q4707557
Q4701751
Q4701775
Q4701150
Q4701175
3.27"
3.03"
3.03"
3.86"
3.86"
4.10"
4.10"
1.75"
1.75"
2.07"
2.50"
2.25"
2.03"
2.25"
3/4"
3/4"
3/4"
1"
1"
1"
1"
3/4"
1/2"
1/2"
3/4"
3/4"
1"
1"
1/2"
1/2"
3/4"
1"
3/4"
1/2"
3/4"
Weight
0.04 lbs
0.04 lbs
0.04 lbs
0.08 lbs
0.08 lbs
0.08 lbs
0.09 lbs
Code Approvals/Standards
Installation
ANSI/NSF 14 and 61 certified
ASTM F 877
ASTM F 1960
CAN/CSA B137.5
ICBO ER 5142
IPC
UPC
NSPC
SBCCI (PST and ESI Report No. 9661)
• Use the appropriate PEX ring for the tubing being connected.
• Refer to the Wirsbo AQUAPEX Installation Handbook for
additional information.
Related Applications
AQUAPEX — Hot and Cold Potable Water Distribution
Wirsbo Radiant Floor Heating Systems
Wirsbo Permafrost Heating Systems
Wirsbo Snow & Ice Melting Systems
© 2002 Uponor Wirsbo Brass ProPEX Coupling Submittal — October 1, 2002