Installation Instructions
CLN70/80/94/96
Schlage Lock modified by Command Access Technologies
STEP 4: Connect the wires exiting the lock pocket to the Bridge
STEP 1: The door must be machined with a 3/8” wire raceway,
Rectifier (included).
cylindrical lock pocket & prepped for a energy transfer hinge.
Make sure the cylindrical pocket is free of debris.
Cyl. Lock
Bridge
Rectifier
Bridge
Rectifier
Cyl. Lock
Pocket
Cyl. Lock
Pocket
Cyl. Lock
Pocket
ETH Hinge Pocket
Cyl. Lock ETH Hinge Pocket
Pocket
ETH Hinge Pocket
ETH Hinge Pocket
Bridge
Rectifier
Bridge
Rectifier
STEP 5: Connect the Bridge Rectifier to the plug exiting the
Cyl. Lock
cylindrical chassis.
Cyl. Lock
Bridge
Bridge
Rectifier
Rectifier
Bridge Bridge
Rectifier Rectifier
3/8 Wire Raceway
Pocket
Cyl. Lock
Pocket
Pocket
Cyl. Lock
Pocket
Cyl. Lock
3/8 Wire Raceway
Pocket
3/8
Wire Raceway
3/8 Wire Raceway
3/8 Wire Raceway
Wire Transfer Hinge
Wire Transfer Hinge
Wire
Transfer
Hinge
Wire Transfer Hinge
3/8 Wire Raceway
Hinge
STEP 3: Screw the ETH hinge to the door. At this time Wire
DOTransfer
NOT
connect the hinge wires on the jamb side to the wires
coming from the power supply.
Plug
Plug
Bridge Rectifier
EL (Fail Safe)
Bridge Rectifier
Bridge Rectifier
Bridge Rectifier
Bridge Rectifier
Bridge Rectifier
Plug
ELECTRICAL SPECIFICATIONS
REX: (Request to Exit Switch) Monitors the inside handle.
EL (Fail Safe)
EL (Fail Safe)
EL (Fail Safe)
Cyl. Lock
Pocket
STEP 8: Connect the wires from the power supply at the ETH
hinge on the jamb side. Connect the hinge to the jamb.
EL: (Fail Safe) When power is applied, the outside trim will lock. When
power is removed, the outside trim is unlocked.
Bridge Rectifier
Bridge Rectifier
Bridge Rectifier
Bridge Rectifier
EL (Fail Safe)
Bridge
Rectifier
Plug
STEP 7: Mount the cylindrical lock per manufacturer’s
instructions.
EU: (Fail Secure) When power is applied, the outside trim will unlock. When
power is removed, the outside trim is locked.
EU (Fail Secure)
Pocket
Pocket
Cyl. LockCyl. Lock
Pocket Pocket
STEP 6: Carefully slip the connected cylindrical lock chassis into
the lock pocket
paying close attention not to pinch any
Plug
wires.
LEGEND OF TERMS
EU (Fail Secure)
EU (Fail Secure)
EU (Fail Secure)
EU (Fail Secure)
Pocket
Cyl. Lock
Pocket
Cyl. Lock
Pocket
Bridge
Rectifier
3/8 Wire Raceway
3/8 Wire Raceway
Cyl. Lock
Pocket
3/8
Wire
ETH Hinge Pocket
3/8 Wire Raceway Raceway
STEP 2: Run the wires from the ETH hinge through the 3/8”
raceway starting at the ETH hinge & exiting into the lock
Cyl. Lock
pocket. Cyl. Lock
Cyl. Lock
Pocket
Cyl. Lock
Pocket
SOLENOIDS:
CURRENT
VOLTS
24VAC/DC 150mA
12VAC/DC 250mA
COIL RESISTANCE
159 Ohms +/- 10%
38 Ohms +/- 10%
SWITCHES: .25A 24VAC/DC
12VAC/DC
12VAC/DC
or
12VAC/DC
or
12VAC/DC
Switch
24VAC/DC
or
Switch
24VAC/DC
EU (Fail
Secure)
or
EU (Fail
Secure)
Wire Transfer
Hinge
Switch 24VAC/DC24VAC/DC
Switch
Wire Transfer Hinge
EU (Fail Secure)
EU (Fail Secure)
Wire
Transfer
Hinge
Wire Transfer Hinge
Power
Power 12VAC/DC
or Supply
Power
Supply
Power
Switch
24VAC/DC
Supply Supply
EU (Fail Secure)
Wire Transfer Hinge
12VAC/DC
12VAC/DC
or
12VAC/DC
or
Power
12VAC/DC
Switch
24VAC/DC
or
Switch
24VAC/DC
EL (Fail
Safe)
or Supply
EL (Fail
Safe) Switch
Wire Transfer
Hinge
Switch
24VAC/DC24VAC/DC
Wire Transfer Hinge
EL (Fail Safe)
EL (Fail Safe)
Wire
Transfer
Hinge
Wire Transfer Hinge
Power
Power 12VAC/DC
or Supply
Power
Supply
Power
Switch
24VAC/DC
Supply
EL (Fail Safe) Supply
Wire Transfer Hinge
REX:
White - Common (C)
Blue - Normally Open (NO)
Black - Normally Closed (NC)
SEE BACK FOR REX TEMPLATE
Power
Supply
Command Access Technologies | 22901 La Palma Ave. Yorba Linda, CA 92831 | Phone: (888) 622-2377 | www.CommandAccess.com
Command Access Technologies is not a licencee, affiliated, associated or connected with Schlage or any of their subsidiaries or affiliates.
#20264_B
Edge of door
Template for Schlage CLN70/80/94/96 Cylindrical Locks
5/16” diameter
through hole
1-3/8”
5/16” diameter
through hole
Edge of door
1-3/8”
2-1/8” diameter
through hole for
interior side only
2.75”
4.03125”
For REX Prep:
1-3/8” deep on
interior side only
7/16” diameter
7/16” wide x
1-3/8 deep