PROJECT INFORMATION
Job Name
PARAGON™ LED
Fixture Type
P17 SERIES
Catalog Number
PRODUCT FEATURES:
Approved by
»»Surface ceiling mount – 17" diameter
»»Marine grade, die-cast aluminum housing and heatsink
»»High-efficiency polycarbonate secondary optic
SPECIFICATIONS:
HOUSING: Marine grade die-cast aluminum. Rib reinforced construction. Integral heat sinks. White TGIC polyester powder coat finish standard – 5-step pre-treatment. Salt spray test: 1,000 hours.
See Ordering Information for other available finishes.
MOUNTING: Choice of Direct-to-Surface over recessed J-Box, Quick Mount onto secured recessed, surface mount, or pendant hung J-Box, 3/4" Pendant Mount, or Trunnion Mount.
OPTICS: Single piece, high-efficiency polycarbonate injection-molded, V-Square roadway classification. Full cut-off classification Optic secured with (4) Torx® Fasteners.
GASKETING: Die-cut, closed cell neoprene self adhesive gasket seals housing to mounting surface. Closed cell, silicone “O” ring gasket seals optics to housing.
ELECTRICAL: Replaceable high-brightness ANSI 4000K (65 CRI min.) or 5000K (65 CRI min.) white LED array. 120-277 VAC, 50/60 Hz. or 347 VAC, 60Hz input. Electronic constant current
driver (<10% THD, >0.95 PF). 0-10V dimming with 10-100% range. Minimum 85% driver efficiency. EMC meets or exceeds FCC CFR Part 15. Standard 10kV/kA surge protection per
IEEE/ANSI C62.41.CAT.A
OPTIONAL SMARTSENSE™: SmartSense Individual Sensor (SSIS) provides individual luminaire control via an integral control module and occupancy/light level sensor. Commissioned with laser
pointer (LP). SmartSense Only Sensor (SSOS) option provides an integral occupancy/light level sensor but must be connected to a remote SSCS Control Module. See Ordering options for required
SmartSense Lens selection.
PHOTOMETRICS: Photometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. For additional photometric data, please go to www.kenall.com.
WARRANTY: Limited ten (10) year warranty.
PATENT: U.S. Patent No. D639,996
NOTE: 25ºC and 40ºC ambient temperature rated unless otherwise noted (See photometric data for light output reductions at higher ambient temperatures).
LISTINGS: Luminaire is certified to UL Standards by Intertek Testing Laboratory for Wet Location. IP65 per IEC 60598.
For maximum efficiency, Kenall recommends the SmartSense Control System (ordered separately). For more information, visit www.kenall.com for specification sheets.
LED
IP65
ORDERING INFORMATION (Ex: P17-DTS-5S-GW-40L40K-DV)
Model
Mounting
P17
Mounting
DTSDirect-to-Surface
QMQuick Mount
PM Pendant Mount
TK Trunnion Kit
Dist. Type Finish
Lamp Type
Voltage
Options
SmartSense Lens
Accessories
5S
Distribution Type
5S Type V – Wide Square
Finish
GW Gloss White
LG Light Gray
Lamp Type
40L40K 40 Watt 4000K LED
40L50K 40 Watt 5000K LED
60L40K 60 Watt 4000K LED
60L50K 60 Watt 5000K LED
82L40K 82 Watt 4000K LED
82L50K 82 Watt 5000K LED
www.kenall.com
Voltage
DV 120-277 Volts
347 347 Volts (60Hz, 25°C Ambient only)
SmartSense™ Lens (Coverage Diameter × Mounting Height)
SS4020† 40' Dia. × 20' ht.
SS488† 48' Dia. × 8' ht.
Options
Accessories
LELEmergency Battery Pack
DS Debris Shield
(32°F, minimum ambient)
LP Laser Pointer
(click here for specifications)
s 10KV10KV/KA Surge Protection per
SmartSense Lens required
IEEE / ANSI C62.41 Cat. A
† S SIS or SSOS required
•
BG
Bird Guard (click here for details)
n/a with Peace of Mind Guarantee
FS
Single Fuse & Holder
•
PH Philips Fasteners (4)
SSIS sSmartSense Individual Sensor
(click here for specifications)
SSOSs SmartSense Only Sensor
(click here to specify required Control Module)
P: 800-4-Kenall
F: 847-360-1781
1020 Lakeside Drive Gurnee, Illinois 60031
When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers,
and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.
Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2014 Kenall Mfg. Co. All rights reserved.
P17-013014
For additional photometry, go to www.kenall.com
PARAGON™ LED
P17 SERIES
PERFORMANCE
Initial Delivered Lumens
Lamp Type
@ 25°C
Efficacy
(lm/W)
@ 40°C
Efficacy
(lm/W)
Input Power
(W)
Drive Current
(mA)
LED Life L70
(est.)
40L50K
4542
97
4315
92
47
350
125,000 Hrs.
60L50K
5789
88
5500
83
66
525
110,000 Hrs.
82L50K
7187
80
6828
76
90
700
90,000 Hrs.
40L40K
4163
88
3955
84
47
350
125,000 Hrs.
60L40K
5078
77
4824
73
66
525
110,000 Hrs.
82L40K
6217
69
5906
66
90
700
90,000 Hrs.
Displayed information above is for selected luminaires only. Additional wattages and color temperatures are also available.
Visit www.kenall.com for additional information.
Model: P17-DTS-5S-GW-40L40K-DV
.1
.5
2
5
2
.2
1
.1
.5
2
5
2
.2
1
10
10
1.75
919
919
1837
1837
1
2756
2756
3674
2.75
2.75
1
3674
2.25
0'
Max Candela = 3674 Located At Horizontal Angle = 45, Vertical Angle = 60
1.75
9'
0'
18'
1 - Vertical Plane Through Horizontal Angles (0 - 180) (Through Max. Cd.)
2 - Horizontal Cone Through Vertical Angle (0) (Through Max. Cd.)
3.75
9'
27'
2.25
18'
36'
3.75
27'
45'
36'
45'
Paragon LED ISO Ft-Candle Chart
Measured at 9' mounting height
DIMENSIONAL DATA
TOP VIEW
17.00"
*5.50"
.312" Dia.
SIDE VIEW
3/4 NPS
23.75"
*5.50"
5.00"
1.36"
4.30"
5.80"
9.31"
17.00"
OPTIONAL
OCCUPANCY SENSOR
*DTS Mounting Only
15.25"
www.kenall.com
P: 800-4-Kenall
F: 847-360-1781
1020 Lakeside Drive Gurnee, Illinois 60031
When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers,
and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.
Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2014 Kenall Mfg. Co. All rights reserved.
P17-013014