Section F – Air Atomizing Spray Nozzles
Overview
Air Atomizing Spray Nozzles
Table of Contents
If your application requires air atomizing nozzles, you’ll find
information on the largest selection in the industry available in
this section. Choose from dozens of nozzle bodies, assemblies and
spray set-ups to get the precise performance you require.
Basic Information
Set-ups. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F3
Air atomizing nozzles require a single air source for the atomizing
air. Some versions, equipped with a cylinder for automatic
operation or clean-out and shut-off needles, may require an
additional air line. Fluid lines are required for all models. The fluid
line can be pressurized or supplied using a siphon- or gravityfed configuration. It is recommended that air and fluid lines are
equipped with the proper filters, regulators and valves.
Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F4
Air atomizing nozzles require spray set-ups. Each set-up consists
of an air cap and fluid cap and some may also include O-rings
and retainer caps. You can select from a wide assortment of
capacities, spray patterns and pressure- or siphon-fed set-ups.
Pressure Spray Set-ups, Internal Mix,
High Transfer Efficiency (HTE). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F19
• Product Range:
– 1/8J and 1/4J Series nozzles are available in many
configurations and operate at standard flow rates. Ranges
from: 0.55 to 58.1 gph at 40 psi (2.08 to 220 l/h at 2.8 bar).
1/8JJ Compact Series
1/8J and 1/4J Series
Overview/Nozzle Bodies/Nozzle Assemblies. . . . . . . . . . . . . . . . . . . F5
Pressure Spray Set-ups, Internal Mix. . . . . . . . . . . . . . . . . . . . . . . . . F9
Pressure Spray Set-ups, External Mix. . . . . . . . . . . . . . . . . . . . . . . . F15
Siphon/Gravity-Fed Spray Set-ups, External Mix. . . . . . . . . . . . . . . F23
Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F25
Pressure Spray Set-ups, Internal Mix. . . . . . . . . . . . . . . . . . . . . . . . F27
– Variable spray nozzles provide independent control of liquid,
atomizing air and fan air pressure for fine tuning of flow rate,
drop size, spray distribution and coverage.
Pressure Spray Set-ups, External Mix, High Capacity. . . . . . . . . . F31
Pressure Spray Set-ups, Internal Mix, Air Efficient . . . . . . . . . . . . F33
– 1/2J Series nozzles offer the same features and benefits as
1/8J and 1/4J Series but operate at higher capacities. Ranges
from: 22.2 to 222 gph at 40 psi (84 to 840 l/h at 2.8 bar).
Siphon/Gravity-Fed Spray Set-ups, External Mix. . . . . . . . . . . . . . . F34
Variable Spray Series
– 1J Series nozzles offer the highest flow rates available. Ranges
from: 120 to 906 gph at 40 psi (454 to 3430 l/h at 2.8 bar).
Variable Spray Nozzles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F36
Pressure Spray Set-ups, External Mix. . . . . . . . . . . . . . . . . . . . . . . . F38
Additional information can be found in Section G, Automatic Spray
Nozzles and in Section K, Special Purpose Spray Nozzles.
1/2J Series
Nozzle Bodies/Nozzle Assemblies. . . . . . . . . . . . . . . . . . . . . . . . . . . F43
Pressure Spray Set-ups, Internal Mix. . . . . . . . . . . . . . . . . . . . . . . . F45
Pressure Spray Set-ups, External Mix. . . . . . . . . . . . . . . . . . . . . . . . F47
Siphon/Gravity-Fed Spray Set-ups, External Mix. . . . . . . . . . . . . . . F49
1J Series
Nozzle Bodies/Nozzle Assemblies. . . . . . . . . . . . . . . . . . . . . . . . . . . F50
Pressure Spray Set-ups, Internal Mix. . . . . . . . . . . . . . . . . . . . . . . . F51
Pressure Spray Set-ups, External Mix. . . . . . . . . . . . . . . . . . . . . . . . F53
Siphon/Gravity-Fed Spray Set-ups, External Mix. . . . . . . . . . . . . . . F53
Special Purpose
Air atomizing caps
AirJet® Fogger Spray Nozzles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F54
DripSafe™ AirJet Fogger Spray Nozzles. . . . . . . . . . . . . . . . . . . . . . F56
Humidification Spray Nozzles and Units. . . . . . . . . . . . . . . . . . . . . . F58
Humidification System Components. . . . . . . . . . . . . . . . . . . . . . . . . F60
Air Atomizing Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F61
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F1
Air Atomizing
Nozzles
Nozzle Bodies/Nozzle Assemblies. . . . . . . . . . . . . . . . . . . . . . . . . . . F26
Air Atomizing Nozzles
Air Atomizing Spray Nozzles
Optimization Tips
• Reduce installation time by using split-eyelet connectors on both the air
and fluid lines. Split-eyelet connectors only require a hole drilled into the
pipe, eliminating the need for cutting, threading and brazing operations.
• To eliminate the unintentional release of non-atomized liquid, use a check
valve to shut down liquid flow if no air pressure is detected.
• Use air atomizing nozzles with clean-out needles to eliminate clogging and
ensure optimum performance.
• Use strainers and air filters to ensure optimum performance.
• If positive shut-off is required, use Drip Free™ set-ups with JAU nozzles.
• Use a heat jacket with VAU/VMAU variable spray nozzles to keep viscous
liquids warm and transferable.
• When adjusting air pressure with internal mix nozzles, do not exceed
recommended values as it may result in choking liquid flow. Increasing
liquid flow can also choke air flow.
AutoJet Spray Controllers
and Systems
• For optimal control of your air atomizing spray system, the use of an
AutoJet® Spray System helps conserve liquid usage and reduces scrap by
monitoring and automatically adjusting spray pattern, flow rate, drop size,
liquid pressure and atomizing air pressure.
Air atomizing nozzles
with clean-out needles
Heat jackets
Spray nozzles
Hot fluid
flow channel
Cut out view of heat jacket
showing unique flow channel
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F2
Set-ups, Basic Information
• Liquid can be supplied to the nozzle under pressure or it can be supplied through a liquid siphon or gravity-feed.
Pressure Spray Set-ups
Siphon/Gravity-Fed Spray Set-ups
• Liquid is supplied to the nozzle under pressure.
• Liquid is supplied via liquid siphon or is gravity-fed.
• Air and liquid can be externally or internally mixed to produce a
completely atomized spray.
• Designed to draw liquid through the feed line into the air flow
where it is atomized.
Air pressure
regulator
with gauge
– 1/8J and 1/4J Series
Pages F23 – F24
– Compact 1/8JJ Series
Pages F34 – F35
– 1/2J Series
Page 49
– 1J Series
Page 53
Air Atomizing
Nozzles
– 1/8J and 1/4J Series
Pages F5 – F18
– 1/2J Series
Pages F43 – F48
– 1J Series
Pages F50 – F52
– Compact 1/8JJ Series
Pages F25 – F33
– Variable 1/8VAA Series
Pages F36 – F42
• New High Transfer Efficiency (HTE) external mix air atomizing
set-ups recently introduced for 1/4J Series.
– Pages F19 – F22
Air shut-off valve
Air shut-off valve
Air
inlet
Air pressure regulator
with gauge
Air filter
1/4JN
air
atomizing
nozzle
Air filter
1/4JN
air atomizing
nozzle
Liquid
inlet
Siphon
tube
Liquid
shut-off valve
Liquid pressure regulator
with gauge
Air
inlet
Siphon
height
Liquid
container
TW
liquid strainer
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F3
Air Atomizing Nozzles
Features, Basic Information
Spray Set-up Features
Atomization Control Features
• Each series is available with a pressure spray set-up or siphon
spray set-up.
• Achieved by adjusting the air and liquid pressure in the spray
set-up.
• Each set-up provides a specific spray pattern with a specific
capacity and spray coverage range performance.
• Obtaining finer atomization is accomplished by increasing the
air pressure and/or lowering the liquid pressure, resulting in a
high ratio of air flow rate to liquid flow rate.
• Spray set-ups are interchangeable for each nozzle series.
– Round spray: Extended full cone round spray pattern.
– Wide angle round spray: Hollow cone-type, wide angle round
spray pattern.
– 360° circular spray: Hollow cone-type 360° circular spray pattern.
– Flat spray: Extended flat or sheet-type spray pattern.
– Deflected flat spray: Extended flat or sheet-type spray diverted
away from the axis of the inlet connection.
• Each spray set-up consists of an air cap and fluid cap.
• For more information request Data Sheets 10616 and 10616-1.
External mix with pressure set-ups: Flat and round spray patterns.
Air cap
Fluid cap
Internal Mix Features
External Mix Features
• Liquid and air are mixed internally to produce a completely
atomized spray.
• Liquid and air streams are mixed outside of the nozzle.
• Liquid and gas streams are not independent and a change in air
flow will affect the liquid flow.
• Effective for higher viscosity liquids and abrasive suspensions.
• Air and liquid flow can be controlled independently.
• External mix can use siphon set-ups or pressure set-ups.
• Internal mix uses pressure set-ups and is available with the
following spray patterns:
– 360° circular spray.
– Flat spray.
– Deflected flat spray.
– Round spray.
– Elliptical spray.
– Wide angle round spray.
Internal mix with
pressure set-ups:
Round spray patterns
• When a siphon set-up is used, a round spray pattern is produced.
• When a pressure set-up is used, a flat spray pattern is produced.
External mix with
siphon set-ups:
Round spray patterns
Internal mix with
pressure set-ups:
Flat spray patterns
External mix with
pressure set-ups:
Flat spray patterns
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F4
Overview/Nozzle Bodies/Nozzle Assemblies,
1/8J and 1/4J Series
1/8J and 1/4J Series air atomizing
Spray set-up for HTE
1/8J, 1/4J
Plug CP1159
2
3
Spray set-up
1/8JN, 1/4JN
1
1/8JCO, 1/4JCO
11005–1/8J, 11005–1/4J
1/4JAU – Drip Free
Shut-off
needle assembly 12810
4
2
3
1. Retainer ring CP1158
2. Air cap
3. Fluid cap
4. Fluid cap gasket CP3612
5. Nozzle body CP1151
6. Back seal gasket CP10439
6
5
Clean-out
needle assembly 11829
Shut-off/clean-out
needle assembly 11140
Air Atomizing
Nozzles
1
Spray set-up for Drip Free™
1
2
3
4
Shut-off/clean-out
needle assembly
Features and Benefits
• The basic J Series nozzle assembly consists of a body and a
spray set-up.
• JN features a manual shut-off needle that enables the flow of
liquid to the nozzle to be stopped.
• Various assemblies can be added to provide shut-off and
clean-out functions.
• JCO features a clean-out needle that is activated manually.
– The needle slides through the liquid orifice to clear
obstructions.
• 1/8J and 1/4J bodies have liquid and air feeds at opposite ends
of the body.
– Bodies are provided with a removable plug so other needle
assemblies may be added in the future.
– Ideal for intermittent spraying applications when liquid can
dry in the orifice between uses.
• 11005 combines the features of JN and JCO offering a
combination shut-off/clean-out needle.
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F5
Air Atomizing Nozzles
Nozzle Bodies/Nozzle Assemblies,
1/8J and 1/4J Series
1/8J, 1/4J
1/8JN, 1/4JN
1/8" and 1/4" NPT or BSPT
1/8JCO, 1/4JCO
11005-1/8J, 1/4J
1/8" or 1/4" NPT or BSPT with
clean-out needle
1/8" or 1/4" NPT or BSPT with
shut-off/clean-out needle
1/8" and 1/4" NPT or BSPT with
shut-off needle
Optimization Tips
See Also
• See page F2 for optimization tips.
• Accessories
– Air line filters
Materials
Material
Nozzle Type
Material
Code
J JN JCO 11005
– Air pressure regulators
– Solenoid valves
– Liquid pressure regulators
– Strainers
Complete Nozzle Assembly
Nozzle Body*
Spray Set-up Only
Spray Set-up
Spray Set-up
1/4 JN – SS + SU11DF – SS
(none)
l
l
l
l
303 Stainless Steel
SS
l
l
l
l
Lucite®*
LUC
l
l
l
l
l
l
Inlet
Conn.
Nozzle
Body
Assembly
Type
Material
Code
Spray
Set-up
No.
Material
Code
*Includes retainer and gasket.
Spray Set-ups
Lucite*
– Pressure gauges
Ordering Info
Nozzle Bodies
Electroless Nickelplated Brass
http://
BSPT connections require the addition of a “B” prior to
the nozzle body inlet connection.
LUC
l
Electroless Nickelplated Brass Air
Cap and
303 Stainless Steel
Fluid Cap
SSBR
l
l
l
l
303 Stainless Steel
SS
l
l
l
l
To order fluid cap only, use fluid cap number (shown in
performance data charts) and material code: 2050-SS.
SU11DF – SS
l
l
Spray
Set-up
No.
Material
Code
To order spray set-up
only, use spray set-up
number and material
code: SU11DF-SS.
To order air cap only, use air cap number (shown in
performance data charts) and material code: 67147-SS.
To order spray nozzle without set-up, use inlet
connection, nozzle body and material code: 1/4JN-SS.
*May not be available for all spray set-ups listed.
Other materials available upon request.
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F6
Nozzle Bodies/Nozzle Assemblies,
1/8J and 1/4J Series
Features and Benefits
• 1/4JF features a built-in liquid strainer.
• The 7545 multiple swivel spray assembly features each spray
set-up mounted on its own swivel body.
– One or two bodies may be used and each can be rotated 360° to
the desired position.
• 1/4JFN features built-in liquid strainer and liquid shut-off needle.
• JBC features the center lines of the air and liquid inlet entering in
the back of the nozzle and parallel to the spray projection axis.
– Swivel bodies are locked in place by a stainless steel lock screw
that runs vertical through the assembly.
• JACN features air and liquid inlet connections entering the nozzle
at 90° to spray projection axis and a shut-off needle.
• 1/8-2JAC dual spray assembly features two opposing spray
set-ups with the air and liquid inlet connections perpendicular
to the spray axis.
• 6552-1/8JAC miniature assembly body is only 1/2" (13 mm) thick
with a 1-5/32" (29 mm) by 1-1/4" (32 mm) rectangular face.
– The tip of the nozzle projects from the face a maximum of
1-3/16" (30 mm) depending upon the spray set-up used.
• 1/4JBCJ features a steam jacket around the nozzle body for
spraying liquids that are too viscous to spray at room temperature.
With Strainer
Top Inlet
1/4JF and 1/4JFN
1/4" NPT or BSPT (F)
air inlet connection
1/8" NPT or BSPT (F)
liquid inlet connection
Swivel
Back Connect
1/8JBC and 1/4JBC
1/8" or 1/4" NPT or BSPT (F)
inlet connection
1/8JAC, 1/8JACN
1/4JAC, 1/4JACN
1/8" or 1/4" NPT or BSPT (F)
inlet connection
Top Inlet
1/8-2JAC
1/8" NPT or BSPT (F)
inlet connection
Optimization Tips
Miniature
• See page F2 for optimization tips.
See Also
• Accessories
– Air line filters
7545
1/8" NPT or BSPT (F) air and
liquid inlet connection
– Air pressure regulators
6552-1/8JAC
1/8" NPT or BSPT (F) air and
liquid inlet connection
http://
– Pressure gauges
– Solenoid valves
– Liquid pressure regulators
– Strainers
• For JBC, request Data Sheets 4921, 6885 and 6185
• For JAC and JACN, request Data Sheets 4922 and 4922-1
Steam Jacket
• For 1/8-2JAC dual spray assembly, request Data Sheet 6497
• For 7545 multiple swivel spray assembly, request
Data Sheet 7545
• For 6552-1/8JAC, request Data Sheet 6552
• For 1/4JBCJ, request Data Sheets 4610 and 6331
1/4JBCJ
1/4" NPT or BSPT (F)
inlet/outlet connection
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F7
Air Atomizing
Nozzles
• JAC features air and liquid inlet connections entering the nozzle at
90° to spray projection axis.
Air Atomizing Nozzles
Nozzle Bodies/Nozzle Assemblies,
1/8J and 1/4J Series
Features and Benefits
• 8650 multiple spray assembly (cluster type) features five spray
set-ups located on the faces of the assembly or four set-ups
located on the side faces.
• 1/4JDLN and 1/4JDLCO feature a screw mount with 9/32" (7 mm)
diameter mounting holes.
– Standard 1/4" (6 mm) screws hold the body to the wall with a
gasket providing the seal.
• 2J is a dual spray assembly with opposing spray set-ups
perpendicular to opposing air and liquid inlets.
– The 1/4JDLN features a shut-off needle and the 1/4JDLCO
features a clean-out needle.
• 20470 Series hand-held air atomizing spray guns feature
lightweight aluminum construction and a comfortable,
easy-to-operate design.
• Thin wall adapters add an adapter locknut and gasket to CP3376
thick wall adapters to provide secure mounting in thin walls and
include CP6378 locknut and CP2804-3 gasket.
• Thick wall adapters replace retainer rings on nozzle assemblies
and fit into threaded wall openings, holding the nozzle securely
in place.
Cluster Type
8650
1/4" NPT or BSPT (F) air and
liquid inlet connection
– Extensions are available in up to 36" (91 cm) lengths.
Twin Spray
Thin Walls
2J
1/4" NPT or BSPT (F)
inlet connection
Available for 1/8J and 1/4J
assemblies
Thick Walls
1/8J and 1/4J with 3/4" NPT or
BSPT (M) adapter connection
Optimization Tips
Screw Mount
• See page F2 for optimization tips.
See Also
1/4" NPT or BSPT (F) air and
liquid inlet connection
• Accessories
– Air line filters
– Air pressure regulators
20470
http://
– Pressure gauges
– Solenoid valves
– Liquid pressure regulators
– Strainers
• For 8650 multiple spray assembly, request Data Sheet 8650
• For 2J, request Data Sheets 5356 and 6530
• For thin wall adapters , request Data Sheet 3378
• For thick wall adapters, request Data Sheets 3378, 7003
and 7323
Hand-held spray gun
1/4" NPT or BSPT (F) inlet connection
• For 1/4JDLN and 1/4JDLCO, request Data Sheet 7690
• For 20470 Series hand-held air atomizing spray guns,
request Data Sheets 20470J, 20470JN, 20470JMCO,
20470JN-1, 20470JJ, 20470JJN and 20470JJNTK
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F8
Pressure Spray Set-ups, Internal Mix,
1/8J and 1/4J Series
Features and Benefits
Air Caps
• For round spray pattern, angle “A” is maintained throughout distance “B”. Beyond “B”, the spray
becomes turbulent and will project out to distance “D”.
• When using a pressure-fed liquid system, the liquid is supplied to the nozzle under pressure.
• The liquid and compressed air or gas are mixed internally to produce a completely atomized spray.
Round spray air caps
produce a narrow, full cone
round spray pattern
Fluid cap
Air cap
Round spray
pattern
A
B
D
1158 retainer ring
3612
gasket
Air Atomizing
Nozzles
1158 retainer ring and 3612 gasket must be ordered separately from the spray set-up, but are included in
the standard nozzle assembly. Please contact your sales engineer.
Performance Data
Round Spray
Spray
Set-up
Spray
Consists of
Set-up
Fluid and
No.
Air Cap
Combination
SU11
Fluid Cap
2050
+
Air Cap
67147
*At the stated pressure in bar.
Liquid Capacity (liters per hour)* and Air Capacity (liters per minute)*
Spray
Dimensions
Liquid Pressure
0.7
1.5
2
3
4
Liquid*
Spray
Angle
A (°)
B
(cm)
D
(m)
.85
.70
13
30
2.7
1.7
1.5
13
33
3.0
Air
Air
Air
Air
Air
Air
Air
Air
Air
Air Air*
l/h
l/h
l/h
l/h
l/h
Press.
l/min Press.
l/min Press.
l/min Press.
l/min Press.
l/min
.70
2.5
15.6
1.1
6.4
11.9
1.4
6.4
13.9
2.7
6.2
23
3.5
7.8
28
.85
1.8
19.0
1.4
5.0
15.0
1.7
5.5
16.7
2.8
5.7
25
3.7
7.3
29
1.0
1.4
22
1.7
4.1
18.7
2.0
4.5
19.8
3.0
5.2
27
3.9
6.4
33
–
–
–
1.8
3.4
20
2.2
3.4
24
3.1
4.7
29
4.2
5.5
38
2.5
2.0
13
36
3.4
–
–
–
2.0
3.0
23
2.4
3.0
26
3.2
4.3
31
4.5
4.5
43
3.1
3.0
14
39
3.8
–
–
–
2.1
2.6
25
2.5
2.5
28
3.4
3.9
33
4.6
4.1
45
–
–
–
2.2
2.0
27
2.7
2.3
31
3.7
3.0
38
4.8
3.7
47
4.5
4.0
15
44
4.4
Add DF to part number for “Drip Free™” set-ups. Example: SU11DF.
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F9
Air Atomizing Nozzles
Pressure Spray Set-ups, Internal Mix,
1/8J and 1/4J Series
Performance Data
Round Spray
Spray
Set-up
Spray
Consists of
Set-up
Fluid and
No.
Air Cap
Combination
SU12A
SU12
SU22B
SU22
SU42
Fluid Cap
2050
+
Air Cap
73160
Fluid Cap
2850
+
Air Cap
73160
Fluid Cap
40100
+
Air Cap
1401110
Fluid Cap
60100
+
Air Cap
1401110
Fluid Cap
100150
+
Air Cap
1891125
*At the stated pressure in bar.
Liquid Capacity (liters per hour)* and Air Capacity (liters per minute)*
Spray
Dimensions
Liquid Pressure
0.7
Air
Press.
1.5
2
Air
Air
l/min Press.
3
l/h
.70
2.5
18.7
1.4
5.7
27
1.7
6.7
29
2.2
9.2
34
2.8
11.9
39
.85
2.0
22
1.5
5.2
29
1.8
6.4
31
2.5
8.2
39
3.1
11.0
43
1.0
1.6
26
1.7
4.8
32
2.0
5.9
34
2.8
7.2
44
3.4
10.1
47
–
–
–
1.8
4.3
35
2.1
5.2
37
3.0
6.7
47
3.7
9.2
–
–
–
2.0
3.9
37
2.2
4.8
40
3.1
6.3
49
3.9
–
–
–
2.1
3.4
40
2.4
4.3
43
3.2
5.9
52
4.2
–
–
–
–
–
–
2.7
3.6
48
3.4
5.5
55
4.5
.85
4.8
21
1.7
8.4
31
2.0
10.7
33
2.7
16.5
37
1.1
4.1
27
1.8
7.5
35
2.1
9.8
37
2.8
15.4
38
1.4
3.4
33
2.0
7.0
37
2.4
8.2
42
3.1
13.6
1.5
3.1
35
2.2
5.7
44
2.7
6.8
48
3.4
1.7
3.0
39
2.5
4.8
49
3.0
5.9
55
1.8
2.9
41
2.8
4.1
54
3.2
5.0
59
2.0
2.8
44
3.1
3.6
59
3.5
4.1
1.1
13.0
76
2.2
17.8
116
2.8
1.4
8.9
91
2.5
13.1
130
1.5
7.2
98
2.8
9.5
1.7
5.8
105
3.1
1.8
4.7
112
3.4
2.0
3.6
119
2.1
2.7
.85
1.0
l/h
Air
Air
l/min Press.
Air Air* Liquid*
l/min
l/h
l/h
Air
Air
l/min Press.
4
Air
Air
l/min Press.
l/h
Spray
Angle
A (°)
B
(cm)
D
(m)
.85
.70
12
43
3.7
1.5
1.5
13
46
4.0
52
2.4
2.0
13
48
4.3
8.4
58
3.0
3.0
13
51
4.6
7.6
62
6.8
68
3.9
4.0
15
56
5.2
3.4
20
43
3.7
18.4
47
1.5
.70
12
48
4.0
43
3.9
16.8
50
2.5
1.5
13
51
4.3
11.8
49
4.2
15.2
55
3.0
2.0
13
53
4.6
3.7
10.4
55
4.5
13.8
60
3.9
9.1
61
4.8
12.4
65
3.4
3.0
14
56
4.9
65
4.2
7.9
65
4.9
11.8
68
4.2
4.0
15
60
5.3
20
136
3.4
32
149
4.6
37
193
3.1
16.3
149
3.9
25
170
5.3
29
220
1.7
.70
18
66
4.9
143
3.4
11.9
163
4.6
15.9
205
5.6
25
235
2.8
1.5
20
76
6.1
7.0
157
3.9
7.0
187
5.3
9.1
240
6.0
21
250
3.9
2.0
20
81
6.7
4.9
171
4.2
4.7
205
5.6
6.8
255
6.3
17.4
270
3.5
4.2
178
4.6
3.0
220
6.0
5.0
275
6.7
14.0
290
5.3
3.0
21
91
7.9
127
–
–
–
–
–
–
6.3
3.6
290
7.0
11.0
305
6.0
4.0
21
97
9.1
31
57
1.4
61
69
2.1
53
96
2.7
80
103
3.8
88
135
25
66
1.5
54
76
2.4
41
112
3.0
69
117
4.2
73
156
1.0
.70
17
61
4.9
1.1
18.5
75
1.7
48
85
2.7
31
127
3.2
59
130
4.6
61
176
1.8
1.5
18
69
5.8
1.3
12.9
85
1.8
41
93
2.8
26
136
3.5
49
146
4.9
48
196
2.8
2.0
20
76
6.7
–
–
–
2.0
35
102
3.0
22
144
3.7
44
154
5.3
39
215
–
–
–
2.1
30
110
–
–
–
3.8
37
161
5.6
31
240
3.5
3.0
20
79
7.0
–
–
–
2.2
25
119
–
–
–
3.9
35
170
6.0
23
260
4.9
4.0
21
91
8.5
1.0
44
86
1.4
125
79
2.0
123
108
2.2
199
88
3.0
250
99
1.1
32
102
1.5
106
91
2.1
108
119
2.5
174
110
3.2
225
120
1.0
.70
19
89
6.1
–
–
–
1.7
87
105
2.2
95
130
2.8
146
133
3.5
205
141
1.7
1.5
20
99
7.0
–
–
–
1.8
70
118
2.4
79
143
3.1
121
154
3.8
182
163
2.4
2.0
21
104
7.6
–
–
–
2.0
55
130
2.5
64
155
3.2
108
166
4.1
159
184
–
–
–
–
–
–
2.7
52
166
3.4
95
176
4.6
121
225
3.1
3.0
21
107
7.9
–
–
–
–
–
–
2.8
42
178
3.5
84
187
4.9
93
255
3.8
4.0
22
117
9.1
Add DF to part number for “Drip Free™” set-ups. Example: SU11DF.
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F10
Pressure Spray Set-ups, Internal Mix,
1/8J and 1/4J Series
Features and Benefits
Air Caps
• For wide angle round spray, dimensions “A”, “B” and “C” are the pattern widths at distances from
the nozzle.
• The total distance of spray projection from the nozzle to the maximum dispersal point is
represented by “D”.
• When using a pressure-fed liquid system, the liquid is supplied to the nozzle under pressure.
• The liquid and compressed air or gas are mixed internally to produce a completely atomized spray.
Wide angle round spray and
360° circular spray air caps
produce hollow cone, wide
angle round spray and
360° circular spray patterns.
Fluid cap
Air cap
C
B
A
Wide angle
round spray pattern
6"
(15 cm)
9" (23 cm)
15" (38 cm)
D
1158 retainer ring
3612
gasket
Air Atomizing
Nozzles
1158 retainer ring and 3612 gasket must be ordered separately from the spray set-up, but are included in
the standard nozzle assembly. Please contact your sales engineer.
Performance Data
Wide Angle Round Spray
Spray
Set-up
Spray
Consists of
Set-up
Fluid and
No.
Air Cap
Combination
SU16
Fluid Cap
2050
+
Air Cap
67-6-20-70°
Fluid Cap
40100
SU26B
+
Air Cap
140-6-37-70°
Fluid Cap
60100
SU26
+
Air Cap
140-6-37-70°
*At the stated pressure in bar.
Liquid Capacity (liters per hour)* and Air Capacity (liters per minute)*
Spray
Dimensions
Liquid Pressure
0.7
1.5
Air
Air
Air
l/h
Press.
l/min Press.
2
3
l/h
Air
Air
l/min Press.
l/h
Air
Air
l/min Press.
l/h
4
Air
Air
l/min Press.
l/h
Air
A
B
Air* Liquid*
l/min
(cm) (cm)
.60
5.3
10.2
1.1
8.1
13.3
1.5
8.1
16.4
2.4
8.9
22
3.1
10.5
24
.70
4.3
12.2
1.3
7.0
15.0
1.8
6.6
21
2.7
8.1
26
3.4
9.7
28
.85
3.0
14.2
1.4
6.4
17.0
2.1
4.9
25
3.0
6.4
30
3.9
7.8
36
1.0
1.7
17.0
1.5
5.5
19.0
2.4
3.2
29
3.2
4.9
34
4.2
6.1
42
–
–
–
1.7
4.5
22
–
–
–
3.4
4.2
37
4.6
4.4
47
–
–
–
1.8
3.5
24
–
–
–
3.5
3.4
40
4.9
2.8
54
.85
7.0
50
1.7
13.2
68
2.0
18.5
68
2.8
25
84
3.7
31
96
1.0
2.1
62
1.8
9.8
79
2.1
15.1
76
3.0
22
92
3.8
28
105
–
–
–
–
–
–
2.2
11.7
85
3.1
18.5
101
3.9
26
–
–
–
–
–
–
–
–
–
3.2
15.1
109
4.1
23
–
–
–
–
–
–
–
–
–
3.4
12.1
119
4.2
–
–
–
–
–
–
–
–
–
3.5
9.1
130
–
–
–
–
–
–
–
–
–
3.7
6.1
.70
24
32
1.4
43
37
2.1
33
66
2.8
.85
13.6
44
1.5
35
49
2.2
26
78
3.0
1.0
7.6
57
1.7
28
61
2.4
18.9
89
–
–
–
1.8
21
71
2.5
11.7
100
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
C
(cm)
D
(m)
.70
.70
14
18
23
1.5
1.4
1.5
15
19
24
1.8
1.8
2.0
16
20
25
2.1
3.0
3.0
16
20
26
2.7
3.9
4.0
19
23
30
4.0
.85
.70
18
24
31
1.8
113
1.7
1.5
19
25
33
2.4
122
2.1
2.0
19
25
33
3.2
20
130
4.6
13.6
153
3.2
3.0
20
26
34
4.1
142
4.9
6.8
183
4.1
4.0
21
28
37
5.9
52
65
3.7
63
68
46
76
3.8
58
79
.85
.70
19
25
36
2.1
3.1
39
87
3.9
52
101
1.5
1.5
20
27
37
3.2
3.2
33
99
4.2
41
111
2.4
2.0
20
27
37
4.1
–
3.4
26
110
4.6
27
138
–
–
3.5
19.5
122
4.9
15.9
166
3.2
3.0
20
28
38
5.0
–
–
3.7
13.2
133
–
–
–
3.9
4.0
20
28
39
6.8
Add DF to part number for “Drip Free™” set-ups. Example: SU11DF.
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F11
Air Atomizing Nozzles
Pressure Spray Set-ups, Internal Mix,
1/8J and 1/4J Series
Performance Data
Wide Angle Round Spray
Spray
Set-up
Spray
Consists of
Set-up
Fluid and
No.
Air Cap
Combination
*At the stated pressure in bar.
Liquid Capacity (liters per hour)* and Air Capacity (liters per minute)*
Spray
Dimensions
Liquid Pressure
0.7
1.5
36
85
2.1
57
116
3.1
53
156
4.2
64
197
5.6
74
245
1.5
29
102
2.4
51
130
3.2
50
163
4.9
51
230
6.0
68
260
1.8
23
117
2.7
45
143
3.4
47
170
5.6
40
265
6.3
62
280
2.0
19.7
125
3.0
39
157
3.5
45
177
6.0
34
285
6.7
56
2.1
16.7
133
3.2
33
170
3.9
38
194
6.3
28
300
7.0
2.3
14.0
142
3.5
28
185
4.6
25
230
6.7
22
320
–
2.4
11.4
149
4.2
13.6
220
4.9
18.5
245
7.0
17.8
335
1.1
12.3
40
2.2
16.3
62
2.7
21
69
4.2
19.3
1.3
9.9
45
2.5
12.1
71
3.0
16.3
78
4.6
1.4
7.9
50
2.8
8.9
79
3.2
12.3
86
1.5
6.1
54
3.0
7.6
83
3.4
10.7
1.7
4.9
58
3.1
6.4
87
3.5
9.3
1.8
3.9
62
3.2
5.5
91
3.9
2.0
3.1
67
3.4
4.7
95
1.7
25
156
3.0
39
1.8
19.7
167
3.1
33
2.0
15.1
178
3.2
2.1
11.4
193
2.3
7.6
205
–
–
–
–
Fluid Cap
40100
SU30
+
Air Cap
120-6-35-60°
Fluid Cap
100150
SU46
+
Air Cap
189-6-62-70°
l/h
Air
Air
l/min Press.
4
1.3
l/h
Air
Air
l/min Press.
3
l/h
Fluid Cap
60100
SU29
+
Air Cap
140-6-52-70°
Air
Air
l/min Press.
2
Air
Press.
l/h
Air
Air
l/min Press.
l/h
Air
A'
Air* Liquid*
l/min
(cm)
B
(cm)
C
(cm)
D
(m)
2.0
.70
20
25
33
5.5
3.0
1.5
20
27
34
6.4
295
3.9
2.0
22
28
37
8.2
51
315
6.0
3.0
23
29
38
9.1
–
–
–
–
–
6.3
4.0
24
32
41
10.4
100
5.6
22
130
14.6
113
6.0
17.6
142
1.5
.70
15
19
23
2.7
4.9
10.8
124
6.3
14.0
152
3.0
1.5
16
20
24
4.6
91
5.3
8.1
135
6.7
11.4
163
3.4
2.0
16
20
24
5.5
94
5.6
6.2
146
7.0
9.1
174
6.4
105
6.0
4.9
157
–
–
–
5.3
3.0
18
22
25
7.3
4.2
4.7
115
6.3
4.0
167
–
–
–
6.3
4.0
19
24
30
9.4
230
3.4
50
250
4.6
62
320
6.0
93
395
240
3.5
43
260
4.9
47
345
6.3
77
425
2.0
.70
24
33
46
5.5
27
255
3.7
41
275
5.3
36
375
6.7
62
460
3.2
1.5
25
34
47
6.4
3.4
23
265
3.9
27
300
5.6
26
405
7.0
52
495
3.9
2.0
28
37
51
7.3
3.5
18.5
280
4.1
23
310
6.0
18.9
435
–
–
–
–
3.7
14.8
290
4.2
18.9
320
6.3
13.6
460
–
–
–
5.3
3.0
29
38
53
7.9
–
–
–
–
4.4
15.9
335
–
–
–
–
–
–
6.3
4.0
33
42
58
9.8
Add DF to part number for “Drip Free™” set-ups. Example: SU11DF.
360° Circular Spray
Spray
Set-up
Spray
Consists of
Set-up
Fluid and
No.
Air Cap
Combination
SU340C
Fluid Cap
60150
+
Air Cap
189-6-62160HC
*At the stated pressure in bar.
Liquid Capacity (liters per hour)* and Air Capacity (liters per minute)*
Liquid Pressure
0.7
Air
Air
Air
l/h
Press.
l/min Press.
1.5
2
l/h
Air
Air
Air
Air
l/h
l/min Press.
l/min Press.
21
3
l/h
4
Air
Air
l/min Press.
l/h
Air
l/min
1.4
15.1
69
2.8
19.5
142
3.5
185
4.2
48
210
6.0
45
340
1.5
10.6
77
3.0
16.1
153
3.7
17.6 196
4.6
37
240
6.3
37
375
1.7
7.6
84
3.1
13.2
165
3.8
14.8 210
4.9
28
275
6.7
30
405
1.8
5.7
93
3.2
10.6
177
3.9
12.5 220
5.6
15.5
340
7.0
24
440
2.0
4.2
103
3.4
8.3
188
4.2
8.1
6.3
7.8
425
–
–
–
245
360° circular spray pattern
Add DF to part number for “Drip Free™” set-ups. Example: SU11DF.
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F12
Pressure Spray Set-ups, Internal Mix,
1/8J and 1/4J Series
Features and Benefits
Air Caps
• For flat spray pattern, dimensions “A”, “B” and “C” are the pattern widths at distances from the
nozzle.
• The total distance of spray projection from the nozzle to the maximum dispersal point is
represented by “D”.
• When using a pressure-fed liquid system, the liquid is supplied to the nozzle under pressure.
• The liquid and compressed air or gas are mixed internally to produce a completely atomized spray.
Flat spray and deflected flat
spray air caps produce flat or
deflected flat spray patterns.
Fluid cap
Air cap
C
B
A
Flat spray
pattern
6"
(15 cm)
9" (23 cm)
15" (38 cm)
3612
gasket
Air Atomizing
Nozzles
1158 retainer ring
D
1158 retainer ring and 3612 gasket must be ordered separately from the spray set-up, but are included in
the standard nozzle assembly. Please contact your sales engineer.
Performance Data
Flat Spray
Spray
Set-up
Spray
Consists of
Set-up
Fluid and
No.
Air Cap
Combination
SU13A
SU13
SUN13
Fluid Cap
2050
+
Air Cap
73328
Fluid Cap
2850
+
Air Cap
73328
Fluid Cap
2850
+
Air Cap
73335
*At the stated pressure in bar.
Liquid Capacity (liters per hour)* and Air Capacity (liters per minute)*
Spray
Dimensions
Liquid Pressure
0.7
1.5
2
3
4
Air
Air
Air
Air
Air
Air
Air
Air
Air
Air
A
l/h
l/h
l/h
l/h
l/h
Air* Liquid*
Press.
l/min Press.
l/min Press.
l/min Press.
l/min Press.
l/min
(cm)
.70
5.5
24
1.3
9.1
31
2.0
8.6
42
2.7
11.2
52
3.9
12.0
69
.85
4.7
27
1.5
7.7
36
2.2
7.5
47
3.0
10.1
56
4.6
9.7
81
1.0
4.1
31
1.8
6.5
42
2.5
6.2
52
3.2
9.1
62
5.3
7.5
1.1
3.5
34
2.1
5.4
47
2.8
5.2
57
3.5
8.1
66
6.0
1.3
3.0
37
2.4
4.3
52
3.1
4.2
63
4.2
5.4
79
6.3
1.4
2.5
40
2.7
3.3
57
3.2
3.7
65
4.6
4.2
85
1.5
2.0
44
2.8
2.8
60
3.4
3.2
68
4.9
3.1
.85
8.2
19.8
1.4
14.4
27
2.1
13.5
36
2.7
1.0
6.8
23
1.7
11.9
32
2.4
11.4
42
3.0
1.1
5.5
27
2.0
9.5
37
2.7
9.2
47
1.3
4.1
30
2.1
8.3
40
3.0
7.1
1.4
2.9
34
2.2
7.1
43
3.2
5.0
–
–
–
2.4
6.1
46
3.4
–
–
–
2.5
5.1
49
1.0
9.0
25
2.0
10.4
1.1
7.8
30
2.1
9.3
1.3
6.6
32
2.2
1.4
5.2
36
1.7
3.1
44
2.0
2.0
2.2
1.1
B
(cm)
C
(cm)
D
(m)
1.1
.70
25
36
46
2.6
93
2.1
1.5
36
48
66
3.0
5.3
104
2.8
2.0
38
53
76
3.2
4.3
110
6.7
3.3
116
3.5
3.0
47
61
86
3.4
91
7.0
2.4
122
6.0
4.0
56
74
94
4.0
19.1
42
4.6
16.1
69
17.1
46
4.9
13.8
76
1.1
.70
36
46
71
2.1
3.2
15.1
52
5.3
11.5
83
2.1
1.5
43
61
81
2.4
53
3.5
13.1
57
5.6
9.3
90
3.0
2.0
51
66
89
2.6
59
4.2
8.1
72
6.0
7.3
97
4.0
63
4.6
5.9
79
6.3
5.6
104
3.5
3.0
58
76
97
2.7
3.5
3.3
66
4.9
4.0
86
6.7
4.3
112
5.6
4.0
58
76
97
3.2
41
2.4
11.6
48
3.1
15.6
56
4.2
17.1
73
45
2.5
10.4
51
3.2
14.6
59
4.6
15.0
80
1.4
.70
10
13
17
3.0
8.2
48
2.7
9.4
54
3.4
13.7
62
4.9
12.8
87
2.5
1.5
13
15
20
3.7
2.5
6.1
55
3.0
7.3
61
3.8
10.8
71
5.3
11.0
94
3.2
2.0
13
17
22
4.0
2.8
4.3
62
3.2
5.5
68
4.2
8.5
82
5.6
9.4
103
50
3.1
3.0
69
3.5
4.1
75
4.9
5.2
98
6.3
7.2
119
3.8
3.0
15
22
28
4.2
56
3.4
2.0
75
3.8
2.9
81
6.0
2.3
120
7.0
6.1
134
5.3
4.0
20
25
33
4.8
Add DF to part number for “Drip Free™” set-ups. Example: SU11DF.
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F13
Air Atomizing Nozzles
Pressure Spray Set-ups, Internal Mix,
1/8J and 1/4J Series
Performance Data
Flat Spray
Spray
Set-up
Spray
Consists of
Set-up
Fluid and
No.
Air Cap
Combination
SU14
SUN23
Fluid Cap
2850
+
Air Cap
73320
Fluid Cap
60100
+
Air Cap
125340
SU23B
Fluid Cap
40100
+
Air Cap
125328
SU23
Fluid Cap
60100
+
Air Cap
125328
SU43
Fluid Cap
100150
+
Air Cap
189351
*At the stated pressure in bar.
Liquid Capacity (liters per hour)* and Air Capacity (liters per minute)*
Spray
Dimensions
Liquid Pressure
0.7
Air
Press.
l/h
1.3
1.4
1.5
1.7
1.8
2.0
–
1.0
1.1
1.3
1.4
–
–
–
1.1
1.3
1.4
1.5
1.7
–
.85
1.0
1.1
1.3
1.4
1.5
–
1.0
1.1
–
–
–
–
–
3.9
3.0
2.3
1.8
1.3
.95
–
17.0
11.0
7.6
3.2
–
–
–
11.2
8.5
6.5
5.0
3.8
–
27
20
15.9
12.5
10.2
7.6
–
29
18.9
–
–
–
–
–
1.5
Air
Air
l/min Press.
30
33
35
38
41
44
–
23
27
33
40
–
–
–
54
60
65
71
77
–
33
38
45
48
56
62
–
90
108
–
–
–
–
–
2.1
2.4
2.5
2.7
2.8
3.0
3.1
2.0
2.1
2.2
2.4
2.5
–
–
2.1
2.2
2.4
2.5
–
–
1.8
2.1
2.2
2.4
2.5
2.7
–
1.8
2.0
–
–
–
–
–
l/h
7.4
5.3
4.4
3.7
3.1
2.6
2.1
24
18.9
14.4
10.6
7.2
–
–
18.0
15.8
13.6
11.6
–
–
38
28
24
21
17.8
15.1
–
56
40
–
–
–
–
–
2
Air
Air
l/min Press.
40
45
47
50
52
55
57
44
50
56
63
71
–
–
79
84
89
95
–
–
55
66
71
76
82
87
–
117
133
–
–
–
–
–
3.0
3.1
3.2
3.4
3.5
3.9
–
2.4
2.5
2.7
2.8
3.0
–
–
2.7
2.8
3.0
3.1
3.2
–
2.4
2.7
3.0
3.2
3.4
3.5
3.7
2.1
2.2
2.4
2.5
2.7
–
–
l/h
6.1
5.3
4.5
3.8
3.2
1.8
–
28
23
18.9
15.1
11.7
–
–
19.6
17.3
15.2
13.2
11.4
–
39
30
24
17.8
15.1
12.9
10.6
100
79
62
48
36
–
–
3
Air
Air
l/min Press.
52
54
57
59
62
68
–
51
59
66
74
79
–
–
93
98
103
109
114
–
67
77
87
98
103
109
114
119
133
147
162
177
–
–
3.9
4.2
4.6
4.9
–
–
–
3.4
3.5
3.7
3.8
3.9
4.2
4.6
3.5
3.7
3.8
3.9
4.1
4.2
3.2
3.5
3.8
3.9
4.2
4.6
4.9
3.0
3.1
3.2
3.4
3.5
3.7
3.8
l/h
9.4
7.2
5.3
3.8
–
–
–
38
33
28
23
19.7
13.1
7.2
27
25
23
21
18.9
17.0
58
47
38
34
27
20
14.8
126
110
95
78
62
48
37
4
Air
Air
l/min Press.
60
67
73
80
–
–
–
72
80
89
97
105
120
138
112
116
121
126
132
137
76
87
97
103
113
126
140
140
151
163
184
193
210
225
5.3
5.6
6.0
6.3
–
–
–
3.9
4.2
4.6
4.9
5.3
5.6
6.3
4.6
4.9
5.3
5.6
6.0
6.3
4.6
5.3
5.6
6.0
6.3
6.7
7.0
4.1
4.2
4.6
4.9
5.3
5.6
–
l/h
10.2
8.3
6.6
5.1
–
–
–
65
53
40
30
21
13.8
3.2
33
28
24
19.7
15.7
12.4
59
40
32
26
20
15.9
12.7
140
125
89
58
34
16.7
–
Air
A
B
C
Air* Liquid*
l/min
(cm) (cm) (cm)
78
84
89
98
–
–
–
75
89
108
127
149
173
225
137
149
161
174
187
200
106
132
145
158
172
185
198
181
193
225
265
305
340
–
D
(m)
1.5
.70
25
33
46
1.8
2.7
1.5
36
51
69
2.0
3.2
2.0
58
74
91
2.0
4.2
3.0
61
74
94
2.1
5.6
4.0
64
76
97
2.3
1.1
.70
10
13
15
2.4
2.1
1.5
10
13
17
3.0
2.8
2.0
13
17
22
3.4
3.7
3.0
15
20
28
3.6
4.9
4.0
20
25
35
4.0
1.4
2.4
3.0
3.7
5.3
.70
1.5
2.0
3.0
4.0
15
23
25
30
33
18
28
33
38
41
20
33
46
46
48
3.0
3.2
3.4
3.5
4.0
1.1
.70
18
23
30
3.4
2.4
1.5
23
30
41
3.5
3.2
2.0
25
33
43
3.7
3.9
3.0
30
38
48
3.8
6.0
4.0
33
41
51
4.4
1.0
.70
18
20
25
3.4
1.8
1.5
25
30
43
3.8
2.4
2.0
25
30
46
4.3
3.4
3.0
33
41
53
4.6
4.9
4.0
36
43
58
5.2
Add DF to part number for “Drip Free™” set-ups. Example: SU11DF.
Deflected Flat Spray
Spray
Set-up
Spray
Consists of
Set-up
Fluid and
No.
Air Cap
Combination
SU240E
Fluid Cap
28150
+
Air Cap
189110-75°
*At the stated pressure in bar.
Liquid Capacity (liters per hour)* and Air Capacity (liters per minute)*
Liquid Pressure
0.7
1.5
2
3
4
Air
Air
Air
Air
Air
Air
Air
Air
Air
Air
l/h
l/h
l/h
l/h
l/h
Press.
l/min Press.
l/min Press.
l/min Press.
l/min Press.
l/min
.40
.60
.70
.80
–
11.0
9.5
7.6
5.7
–
45
54
65
77
–
1.1
1.3
1.4
1.5
1.7
14.5 79
13.2 86
11.8 95
10.0 103
8.7 113
1.5
1.7
1.8
2.1
2.2
15.7
14.3
12.9
9.8
8.3
96
104
112
130
142
2.1
2.2
2.7
3.1
3.2
20
19.2
15.8
11.8
10.3
114
121
146
173
183
2.7
3.2
3.8
4.4
4.6
26
22
17.7
13.1
10.2
133
160
186
230
250
Deflected flat spray pattern
Add DF to part number for “Drip Free™” set-ups. Example: SU11DF.
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F14
Pressure Spray Set-ups, External Mix,
1/8J and 1/4J Series
Features and Benefits
Air Caps
• Atomization can be controlled by varying the air pressure without changing liquid flow rates with
external mix set-ups.
• For flat spray, dimensions “A”, “B” and “C” are the pattern widths at distances from the nozzle.
External mix air caps
produce a flat spray pattern.
• The total distance of spray projection from the nozzle to the maximum dispersal point is
represented by “D”.
• When using a pressure-fed liquid system, the liquid is supplied to the nozzle under pressure.
• The liquid and compressed air or gas are mixed externally to produce a completely atomized spray.
C
B
A
Fluid cap
Air cap
Flat spray
pattern
6"
(15 cm)
9" (23 cm)
15" (38 cm)
D
3612
gasket
1158 retainer ring
Air Atomizing
Nozzles
1158 retainer ring and 3612 gasket must be ordered separately from the spray set-up, but are included in
the standard nozzle assembly. Please contact your sales engineer.
Performance Data
Flat Spray (External Mix)
Spray
Set-up
No.
SUE15B
Spray
Set-up
Consists of
Fluid and
Air Cap
Combination
Fluid Cap
1650
+
Air Cap
67228-45°
*At the stated pressure in bar.
Liquid Capacity (liters per hour)* and Air Capacity (liters per minute)*
Spray
Dimensions
Liquid Pressure
0.2
0.3
0.7
1.5
3
Air
Air
Air
Air
Air
Air
Air
Air
Air
Air
A
B
C
l/h
l/h
l/h
l/h
l/h
Air* Liquid*
Press.
l/min Press.
l/min Press.
l/min Press.
l/min Press.
l/min
(cm) (cm) (cm)
D
(m)
.20
2.8
25.2
3.5
3.5
26.3
.70
5.3
31.2
1.4
7.8
45.3
2.8
11.0 73.6
.35
2.8
26.3
.70
3.5
31.2
1.05
5.3
39.6
1.75
7.8
53.8
3.5
11.0
85
.20
.20
9.0
15.0
23
.90
1.05
.20
9.0
15.0
23
1.2
.70
2.8
31.2
1.05
3.5
39.6
1.4
5.3
45.3
2.1
7.8
59.5
4.2
11.0 102
1.4
.35
10.0 15.0
23
1.2
1.05
2.8
39.6
1.4
3.5
45.3
1.75
5.3
53.8
2.8
7.8
73.6
4.9
11.0 119
1.4
1.4
11.5 18.0
25
1.5
1.4
2.8
45.3
1.75
3.5
53.8
2.1
5.3
59.4
3.5
7.8
85
5.3
.70
11.5 15.0
24
1.5
1.4
13.0 18.0
28
1.8
2.8
15.0 18.0
24
2.4
1.75
2.8
53.8
2.1
3.5
59.4
2.8
5.3
73.6
4.2
7.8
102
5.6
11.0 127.5 1.75
11.0 139 2.8
2.1
2.8
59.4
2.8
3.5
73.6
3.5
5.3
85
5.6
7.8
139
6.3
11.0 159
4.9
Add DF to part number for “Drip Free™” set-ups. Example: SU11DF.
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F15
Air Atomizing Nozzles
Pressure Spray Set-ups, External Mix,
1/8J and 1/4J Series
Performance Data
Flat Spray (External Mix)
Spray
Set-up
No.
SUE18B
SUE15A
SUE18A
SUE15
SUE18
Spray
Set-up
Consists of
Fluid and
Air Cap
Combination
Fluid Cap
1650
+
Air Cap
62240-60°
Fluid Cap
2050
+
Air Cap
67228-45°
Fluid Cap
2050
+
Air Cap
62240-60°
Fluid Cap
2850
+
Air Cap
67228-45°
Fluid Cap
2850
+
Air Cap
62240-60°
*At the stated pressure in bar.
Liquid Capacity (liters per hour)* and Air Capacity (liters per minute)*
Spray
Dimensions
Liquid Pressure
0.2
0.3
0.7
1.5
3
Air
Air
Air
Air
Air
Air
Air
Air
Air
Air
A
B
l/h
l/h
l/h
l/h
l/h
Air* Liquid*
Press.
l/min Press.
l/min Press.
l/min Press.
l/min Press.
l/min
(cm) (cm)
C
(cm)
D
(m)
79
.40
.60
.60
1.1
1.4
1.1
1.4
.30
.70
1.5
1.5
1.5
2.0
3.0
20
23
28
28
25
28
30
28
30
35
33
30
35
38
33
40
46
43
41
48
51
1.2
1.8
1.8
2.4
2.7
2.6
2.7
16.6
82
.35
.20
7.5
14.0
22
1.0
3.5
16.6
85
1.4
.20
9.0
15.0
22
1.7
12.2 73.6
4.2
16.6 102 1.75
.35
10.0
16.5
23
1.8
3.5
12.2
85
4.9
16.6 119 1.75
1.4
13.0
19.0
29
2.1
73.6
4.2
12.2 102
5.25
16.6 127
2.1
.70
13.0
18.0
25
1.8
8.3
85
4.9
12.2 119
6.3
16.6 159
3.5
1.4
13.0
22
30
2.4
4.2
8.3
102
6.3
12.2 159
6.7
16.6 164
5.3
2.8
15.0
19.0
25
3.0
22
.60
8.3
28
.70
12.2
34
1.1
16.6
45
5.5
34
.70
8.3
34
1.4
12.2
54
1.4
16.6
54
1.1
5.5
45
1.4
8.3
54
2.1
12.2
71
2.1
16.6
71
45
1.4
5.5
54
2.1
8.3
71
2.5
12.2
79
2.5
16.6
79
.70
1.1
.70
1.4
2.5
1.8
1.8
.30
.70
1.5
1.5
1.5
2.0
3.0
28
30
38
35
33
38
41
33
38
46
43
40
46
48
40
48
58
56
51
58
66
1.5
2.1
1.8
2.4
3.0
2.7
2.9
8.5
31.2
1.05
10.4 39.6
1.4
15.9 45.3
2.5
23
68
3.5
33
85
.70
.20
13.0
16.5
25
1.2
1.05
8.5
39.6
1.4
10.4 45.3
1.75
15.9 53.8
2.8
23
73.6
4.2
33
102 1.75
.20
13.0
16.5
25
1.8
1.4
8.5
45.3
1.75
10.4 53.8
2.1
15.9 59.4
3.5
23
85
4.9
33
119
2.1
.35
13.0
18.0
24
1.8
1.75
8.5
53.8
2.1
10.4 59.4
2.8
15.9 73.6
4.2
23
102
5.3
33
127
2.5
1.4
14.0
20
32
1.8
2.1
8.5
59.4
2.8
10.4 73.6
3.5
15.9 85.0
4.9
23
119
5.6
33
139
2.8
.70
14.0
19.0
30
2.3
2.8
8.5
73.6
3.5
10.4
85
4.2
15.9 102
5.6
23
139
6.3
33
159
4.2
1.4
14.0
20
36
3.0
3.5
8.5
85
4.2
10.4 102
4.9
15.9 119
6.3
23
159
7.0
33
176
5.3
2.8
16.5
20
30
4.0
.40
8.5
25
.40
10.4
25
.40
15.9
25
.70
23
34
1.4
33
54
.50
8.5
27.5
.60
10.4
28
.60
15.9
28
.85
23
40
1.8
33
62
.60
8.5
28
.65
10.4
31
.70
15.9
34
1.1
23
45
2.1
33
71
.70
8.5
34
.70
10.4
34
.85
15.9
40
1.4
23
54
2.5
33
79
.60
.60
.70
1.1
1.4
1.8
2.1
.30
.70
1.5
1.5
1.5
2.0
3.0
35
35
38
41
43
41
41
48
48
48
51
53
51
51
61
63
63
66
66
69
69
1.8
1.5
1.8
2.1
2.4
2.7
2.9
.35
2.8
22
.35
3.5
22
.40
5.3
25
.60
7.8
28
.70
11.0
34
.40
2.8
25
.40
3.5
25
.60
5.3
28
.70
7.8
34
1.1
11.0
45
.50
2.8
27.5
.60
3.5
28
.70
5.3
34
1.1
7.8
45
1.8
11.0
62
.60
2.8
28
.70
3.5
34
.85
5.3
40
1.4
7.8
54
2.5
11.0
.35
4.5
26.3
.70
5.5
31.2
1.05
8.3
39.6
1.75
12.2 53.8
3.15
.70
4.5
31.2
1.05
5.5
39.6
1.4
8.3
45.3
2.1
12.2 59.4
1.05
4.5
39.6
1.4
5.5
45.3
1.75
8.3
53.8
2.8
1.4
4.5
45.3
1.75
5.5
53.8
2.1
8.3
59.4
1.75
4.5
53.8
2.1
5.5
59.4
2.8
8.3
2.1
4.5
59.4
2.8
5.5
73.6
3.5
2.8
4.5
73.6
3.5
5.5
85
.35
4.5
22
.35
5.5
.60
4.5
28
.70
.70
4.5
34
1.1
4.5
.70
Add DF to part number for “Drip Free™” set-ups. Example: SU11DF.
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F16
Pressure Spray Set-ups, External Mix,
1/8J and 1/4J Series
Performance Data
Flat Spray (External Mix)
SUE25B
SUE28B
SUE25A
SUE28A
SUE28
Fluid Cap
35100
+
Air Cap
134255-45°
Fluid Cap
35100
+
Air Cap
122281-60°
Fluid Cap
40100
+
Air Cap
134255-45°
Fluid Cap
40100
+
Air Cap
122281-60°
Fluid Cap
60100
+
Air Cap
122281-60°
Liquid Capacity (liters per hour)* and Air Capacity (liters per minute)*
Spray
Dimensions
Liquid Pressure
0.2
0.3
0.7
1.5
3
Air
Air
Air
Air
Air
Air
Air
Air
Air
Air
A
l/h
l/h
l/h
l/h
l/h
Air* Liquid*
Press.
l/min Press.
l/min Press.
l/min Press.
l/min Press.
l/min
(cm)
B
(cm)
C
(cm)
D
(m)
.70
13.4
85
1.0
16.4 102
1.4
25
116
2.5
37
178
3.2
52
212
.70
.20
13.0
19.0
25
1.7
1.0
13.4 102
1.4
16.4 116
1.8
25
139
2.8
37
195
3.5
52
232
1.8
.20
13.0
19.0
25
2.7
1.4
13.4 116
1.8
16.4 139
2.1
25
156
3.5
37
227
3.9
52
255
2.1
.35
15.0
19.0
28
3.0
1.8
13.4 139
2.1
16.4 156
2.5
25
178
4.2
37
266
4.2
52
275
2.5
.70
15.0
22
28
3.5
2.1
13.4 156
2.8
16.4 195
2.8
25
195
4.9
37
312
4.9
52
314
2.5
1.4
16.5
23
36
3.7
1.4
16.5
23
37
4.3
2.8
13.4 195
3.5
16.4 227
3.5
25
227
5.6
37
360
5.6
52
360
4.2
3.5
13.4 227
4.2
16.4 266
4.2
25
266
6.3
37
411
6.3
52
411
4.9
2.8
16.5
22
32
4.9
.60
13.4
91
.70
16.4 102
1.4
25
156
2.1
37
210
3.2
52
285
.70
13.4 102
1.1
16.4 130
2.1
25
210
2.8
37
260
4.2
52
360
1.1
13.4 130
1.8
16.4 184
2.5
25
235
3.5
37
310
5.3
52
430
1.4
13.4 156
2.1
16.4 210
2.8
25
260
4.2
37
360
5.6
52
455
1.4
2.1
2.1
3.2
4.2
3.9
4.2
.30
.70
1.5
1.5
1.5
2.0
3.0
33
33
35
38
38
41
38
38
40
46
48
48
51
51
48
56
58
66
64
69
71
3.8
4.3
4.0
4.6
5.2
4.6
4.9
.70
17.6
85
1.4
22
116
1.8
33
139
2.8
48
195
3.5
68
232
.70
.35
15.0
19.0
27
2.1
1.0
17.6 102
1.8
22
139
2.1
33
156
3.2
48
212
4.2
68
275
1.8
.70
15.0
19.0
27
3.0
1.4
17.6 116
2.1
22
156
2.5
33
178
3.5
48
227
4.9
68
314
2.5
1.4
15.0
22
33
3.4
1.8
17.6 139
2.5
22
178
2.8
33
195
4.2
48
266
5.3
68
340
2.8
1.4
15.0
22
36
3.8
2.1
17.6 156
2.8
22
195
3.5
33
227
4.9
48
312
5.6
68
360
2.8
1.4
16.5
25
37
4.0
2.1
16.5
25
37
4.9
2.8
17.6 195
3.5
22
227
4.2
33
266
5.6
48
360
6.3
68
411
4.2
3.5
17.6 227
4.2
22
266
4.9
33
312
6.3
48
411
6.6
68
428
5.3
2.8
18.0
23
36
5.8
.60
17.6
91
.70
22
102
1.1
33
130
2.5
48
235
3.5
68
310
1.1
17.6 130
1.4
22
156
1.8
33
184
3.2
48
285
4.6
68
380
1.4
17.6 156
1.8
22
184
2.5
33
235
3.9
48
330
6.0
68
475
1.8
17.6 184
2.1
22
210
2.8
33
260
4.2
48
360
6.7
68
525
1.1
1.8
2.5
3.2
4.2
4.2
4.9
.20
.70
1.5
1.5
1.5
2.0
3.0
33
35
38
33
30
33
33
38
48
46
43
43
43
43
51
64
64
61
58
61
61
3.5
3.0
3.8
4.3
4.9
5.2
4.0
2.1
2.8
3.2
4.6
5.6
3.9
6.3
.30
.70
1.5
1.5
1.5
2.0
3.0
40
46
48
43
38
48
41
56
58
58
53
51
64
56
76
81
79
76
66
84
79
3.0
4.0
4.3
4.9
5.8
4.3
5.8
.70
36
102
1.1
45
130
1.8
68
184
3.2
100
285
5.3
141
430
1.1
36
130
1.4
45
156
2.1
68
210
3.5
100
310
6.0
141
475
1.4
36
156
2.1
45
210
2.8
68
260
4.9
100
405
6.7
141
525
1.8
36
184
2.5
45
235
3.2
68
285
5.9
100
455
7.0
141
550
Add DF to part number for “Drip Free™” set-ups. Example: SU11DF.
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F17
Air Atomizing
Nozzles
Spray
Set-up
No.
Spray
Set-up
Consists of
Fluid and
Air Cap
Combination
*At the stated pressure in bar.
Air Atomizing Nozzles
Pressure Spray Set-ups, External Mix,
1/8J and 1/4J Series
Performance Data
Flat Spray (External Mix)
Spray
Set-up
No.
SUE25
SUE45B
SUE45A
SUE45
Spray
Set-up
Consists of
Fluid and
Air Cap
Combination
Fluid Cap
60100
+
Air Cap
134255-45°
Fluid Cap
60150
+
Air Cap
200278-45°
Fluid Cap
80150
+
Air Cap
200278-45°
Fluid Cap
100150
+
Air Cap
200278-45°
*At the stated pressure in bar.
Liquid Capacity (liters per hour)* and Air Capacity (liters per minute)*
Spray
Dimensions
Liquid Pressure
0.2
0.3
0.7
1.5
3
Air
Air
Air
Air
Air
Air
Air
Air
Air
Air
A
l/h
l/h
l/h
l/h
l/h
Air* Liquid*
Press.
l/min Press.
l/min Press.
l/min Press.
l/min Press.
l/min
(cm)
B
(cm)
C
(cm)
D
(m)
1.0
36
102
1.8
45
139
2.5
68
178
3.2
100
212
3.9
141
255
1.0
.20
15.0
20
25
2.7
1.4
36
116
2.1
45
156
2.8
68
195
3.5
100
227
4.2
141
275
2.1
.20
15.0
22
29
3.0
1.8
36
139
2.5
45
178
3.2
68
212
3.9
100
246
4.6
141
297
2.8
.35
18.0
24
36
3.5
2.1
36
156
2.8
45
195
3.5
68
227
4.2
100
266
4.9
141
314
3.2
1.4
20
28
39
3.7
360
3.5
.70
19.0
27
38
4.0
411
4.2
1.4
20
28
39
4.3
2.8
18.0
24
38
5.9
2.5
2.8
36
36
178
195
3.2
3.5
45
45
212
227
4.2
4.9
68
68
266
312
4.9
5.6
100
100
312
360
5.6
6.3
141
141
3.5
36
227
4.2
45
266
5.6
68
360
6.3
100
411
7.0
141
453
5.6
1.8
36
235
1.8
45
235
2.5
68
300
3.9
100
410
–
–
–
1.8
.20
15.0
20
29
3.0
2.1
36
260
2.1
45
260
2.8
68
330
4.2
100
445
–
–
–
2.8
.20
15.0
20
30
3.4
2.5
36
300
2.5
45
300
3.2
68
355
4.6
100
480
–
–
–
2.8
.30
15.0
20
30
4.0
2.8
36
330
2.8
45
330
3.5
68
380
4.9
100
529
–
–
–
3.5
.70
17.0
22
32
4.3
3.2
36
355
3.2
45
355
3.9
68
410
5.3
100
565
–
–
–
3.9
1.5
17.0
22
34
4.6
–
4.2
1.0
17.0
23
33
4.7
1.5
17.0
23
34
5.5
3.5
36
380
3.5
45
380
4.2
68
445
5.6
100
600
–
–
4.2
36
445
4.2
45
445
4.9
68
520
6.3
100
685
–
–
–
4.9
2.1
64
260
2.8
78
330
3.9
119
410
4.9
175
520
–
–
–
2.1
.20
17.0
24
34
3.5
2.5
64
300
3.2
78
355
4.2
119
445
5.3
175
565
–
–
–
3.2
.20
18.0
24
36
4.3
2.8
64
330
3.5
78
380
4.6
119
480
5.6
175
600
–
–
–
3.9
.30
18.0
25
36
4.9
3.2
64
355
3.9
78
410
4.9
119
520
6.0
175
640
–
–
–
4.9
.70
18.0
25
36
5.5
3.5
64
380
4.2
78
445
5.3
119
565
6.3
175
685
–
–
–
4.9
1.5
20
25
38
5.5
4.2
64
445
4.9
78
520
5.6
119
600
–
–
–
–
–
–
5.3
1.0
18.0
25
38
5.8
1.5
20
25
38
6.1
4.9
64
520
5.6
78
600
6.3
119
685
–
–
–
–
–
–
5.6
2.8
102
330
3.5
125
380
4.6
192
480
5.6
280
600
–
–
–
2.8
.20
19.0
25
36
4.6
3.2
102
355
3.9
125
410
4.9
192
520
6.0
280
640
–
–
–
3.9
.20
20
25
37
4.9
3.5
102
380
4.2
125
445
5.3
192
565
6.3
280
685
–
–
–
4.6
.30
20
25
37
5.2
3.9
102
410
4.6
125
480
5.6
192
600
–
–
–
–
–
–
5.3
.70
22
27
38
5.5
4.2
102
445
4.9
125
520
6.0
192
640
–
–
–
–
–
–
5.6
1.0
22
27
41
5.5
4.6
102
480
5.3
125
565
6.3
192
685
–
–
–
–
–
–
5.6
1.5
22
27
41
5.8
4.9
102
520
5.6
125
600
–
–
–
–
–
–
–
–
–
6.0
1.5
22
27
41
6.1
Add DF to part number for “Drip Free™” set-ups. Example: SU11DF.
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F18
Pressure Spray Set-ups, External Mix,
High Transfer Efficiency (HTE), 1/4J Series
Features and Benefits
C
B
A
Flat spray
pattern
• A new air cap design enables the use of lower air pressures to achieve
the same spray performance as conventional external mix set-ups.
6" (15 cm)
9" (23 cm)
15" (38 cm)
• HTE set-ups operate at pressures as low as 5 psi (0.3 bar).
• A large air chamber directly feeds the air exit orifices. Design provides
high liquid transfer efficiency, minimal air loss, and minimal misting.
D
• Air consumption is reduced and maximum spray coverage on the target
is achieved.
C
• See also
B
A
Round spray
pattern
– Section G, Automatic Spray Nozzles
Air Caps
6" (15 cm)
9" (23 cm)
15" (38 cm)
D
Air Atomizing
Nozzles
1158 retainer ring and 3612 gasket must be ordered separately
from the spray set-up, but are included in the standard nozzle
assembly. Please contact your sales engineer.
HTE air cap produces a flat
spray and a round spray.
Performance Data
Flat Spray (External Mix)
Spray
Set-up
No.
Spray
Set-up
Consists of
Fluid and
Air Cap
Combination
Fluid Cap
PF28100
SU-HTE60D
+
Air Cap
LP130262-60
Fluid Cap
PF20100
SU-HTE60E
+
Air Cap
LP130262-60
SU-HTE60F
Fluid Cap
PF16100
+
Air Cap
LP130262-60
*At the stated pressure in bar.
Liquid Capacity (liters per hour)* and Air Capacity (liters per minute)*
Spray
Dimensions
Liquid Pressure
0.3
0.7
1
1.4
2.1
Air
Air
Air
Air
Air
Air
Air
Air
Air
Air
A
l/h
l/h
l/h
l/h
l/h
Air* Liquid*
Press.
l/min Press.
l/min Press.
l/min Press.
l/min Press.
l/min
(cm)
.55
.69
.83
.97
1.1
.41
.55
.69
.83
.97
1.1
.28
.41
.55
.69
.83
.97
1.1
11.4
11.4
11.4
11.4
11.4
6.1
6.1
6.1
6.1
6.1
6.1
3.8
3.8
3.8
3.8
3.8
3.8
3.8
94
106
118
129
139
81
94
106
118
129
139
65
81
94
106
118
129
139
.55
.69
.83
.97
1.1
.41
.55
.69
.83
.97
1.1
–
–
.55
.69
.83
.97
1.1
15.9
15.9
15.9
15.9
15.9
8.3
8.3
8.3
8.3
8.3
8.3
–
–
5.3
5.3
5.3
5.3
5.3
94
106
118
129
139
81
94
106
118
129
139
–
–
94
106
118
129
139
–
.69
.83
.97
1.1
–
.55
.69
.83
.97
1.1
–
–
.55
.69
.83
.97
1.1
–
19.3
19.3
19.3
19.3
–
9.8
9.8
9.8
9.8
9.8
–
–
6.4
6.4
6.4
6.4
6.4
–
106
118
129
139
–
94
106
118
129
139
–
–
94
106
118
129
139
–
–
.83
.97
1.1
–
–
.69
.83
.97
1.1
–
–
.55
.69
.83
.97
1.1
–
–
23
23
23
–
–
11.7
11.7
11.7
11.7
–
–
7.6
7.6
7.6
7.6
7.6
–
–
118
129
139
–
–
106
118
129
139
–
–
94
106
118
129
139
–
–
–
.97
1.1
–
–
–
–
.97
1.1
–
–
–
–
.83
.97
1.1
–
–
–
27
27
–
–
–
–
14.0
14.0
–
–
–
–
9.1
9.1
9.1
–
–
–
129
139
–
–
–
–
129
139
–
–
–
–
118
129
139
B
(cm)
C
D
(cm) (cm)
.69
1.0
.69
1.0
.69
.34
.34
.69
.69
1.4
18
13
29
15
25
33
15
34
23
38
36
20
36
25
43
91
102
102
114
104
.34
.69
1.0
.34
.69
1.0
.34
.34
.34
.69
.69
.69
18
10
8
20
17
17
23
11
11
28
18
18
16
11
14
33
18
19
64
79
86
56
69
81
.21
.34
.69
1.0
.34
.69
1.0
.34
.34
.34
.34
.69
.69
.69
24
23
20
17
22
19
15
28
25
23
19
24
23
19
33
30
29
22
30
28
24
58
61
64
71
56
64
74
Add DF to part number for “Drip Free™” set-ups. Example: SU-HTE60D-DF.
The operating pressures and flow rates are based on spraying water and air at room temperature.
Adjustments may need to be made to accommodate other liquids with different characteristics.
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F19
Air Atomizing Nozzles
Pressure Spray Set-ups, External Mix,
High Transfer Efficiency (HTE), 1/4J Series
Performance Data
Flat Spray (External Mix)
Spray
Set-up
No.
Spray
Set-up
Consists of
Fluid and
Air Cap
Combination
Fluid Cap
PF35100
SU-HTE61C
+
Air Cap
LP130285-60
Fluid Cap
PF28100
SU-HTE61D
+
Air Cap
LP130285-60
Fluid Cap
PF20100
SU-HTE61E
+
Air Cap
LP130285-60
SU-HTE61F
Fluid Cap
PF16100
+
Air Cap
LP130285-60
Fluid Cap
PF28100
SU-HTE62D
+
Air Cap
LP120262-90
Fluid Cap
PF20100
SU-HTE62E
+
Air Cap
LP120262-90
*At the stated pressure in bar.
Liquid Capacity (liters per hour)* and Air Capacity (liters per minute)*
Spray
Dimensions
Liquid Pressure
0.3
0.7
1
1.4
2.1
Air
Air
Air
Air
Air
Air
Air
Air
Air
Air
A
l/h
l/h
l/h
l/h
l/h
Air* Liquid*
Press.
l/min Press.
l/min Press.
l/min Press.
l/min Press.
l/min
(cm)
.41
17.8 100
–
–
–
–
–
–
–
–
–
–
–
–
.55
17.8 117
.55
25
117
–
–
–
–
–
–
–
–
–
.69
17.8 133
.69
25
133
–
–
–
–
–
–
–
–
–
.83
17.8 149
.83
25
149
.83
31
149
–
–
–
–
–
–
.97
17.8 163
.97
25
163
.97
31
163
.97
36
163
.97
43
163
1.1
17.8 177
1.1
25
177
1.1
31
177
1.1
36
177
1.1
43
177
.41
11.4 100
–
–
–
–
–
–
–
–
–
–
–
–
.55
11.4 117
.55
15.9 117
–
–
–
–
–
–
–
–
–
.69
11.4 133
.69
15.9 133
.69
19.3 133
–
–
–
–
–
–
.83
11.4 149
.83
15.9 149
.83
19.3 149
–
–
–
–
–
–
.97
11.4 163
.97
15.9 163
.97
19.3 163
.97
23
163
.97
27
163
1.1
11.4 177
1.1
15.9 177
1.1
19.3 177
1.1
23
177
1.1
27
177
.28
6.1
80
–
–
–
–
–
–
–
–
–
–
–
–
.41
6.1
100
–
–
–
–
–
–
–
–
–
–
–
–
.55
6.1
117
.55
8.3
117
–
–
–
–
–
–
–
–
.69
6.1
133
.69
8.3
133
.69
9.8
133
.69
11.7 133
.69
14.0 133
.83
6.1
149
.83
8.3
149
.83
9.8
149
.83
11.7 149
.83
14.0 149
.97
6.1
163
.97
8.3
163
.97
9.8
163
.97
11.7 163
.97
14.0 163
1.1
6.1
177
1.1
8.3
177
1.1
9.8
177
1.1
11.7 177
1.1
14.0 177
.28
3.8
80
–
–
–
–
–
–
–
–
–
–
–
–
.41
3.8
100
.41
5.3
100
–
–
–
–
–
–
–
–
–
.55
3.8
117
.55
5.3
117
.55
6.4
117
.55
7.6
117
–
–
–
.69
3.8
133
.69
5.3
133
.69
6.4
133
.69
7.6
133
.69
9.1
133
.83
3.8
149
.83
5.3
149
.83
6.4
149
.83
7.6
149
.83
9.1
149
.97
3.8
163
.97
5.3
163
.97
6.4
163
.97
7.6
163
.97
9.1
163
1.1
3.8
177
1.1
5.3
177
1.1
6.4
177
1.1
7.6
177
1.1
9.1
177
.28
11.4
57
–
–
–
–
–
–
–
–
–
–
–
–
.41
11.4
70
.41
15.9
70
–
–
–
–
–
–
–
–
–
.55
11.4
82
.55
15.9
82
.55
19.3
82
–
–
–
–
–
–
.69
11.4
93
.69
15.9
93
.69
19.3
93
.69
23
93
–
–
–
.83
11.4 103
.83
15.9 103
.83
19.3 103
.83
23
103
.83
27
103
.97
11.4 112
.97
15.9 112
.97
19.3 112
.97
23
112
.97
27
112
1.1
11.4 121
1.1
15.9 121
1.1
19.3 121
1.1
23
121
1.1
27
121
.28
6.1
57
–
–
–
–
–
–
–
–
–
–
–
–
.41
6.1
70
–
–
–
–
–
–
–
–
–
–
–
–
.55
6.1
82
.55
8.3
82
–
–
–
–
–
–
–
–
–
.69
6.1
93
.69
8.3
93
.69
9.8
93
.69
11.7
93
–
–
–
.83
6.1
103
.83
8.3
103
.83
9.8
103
.83
11.7 103
.83
14.0 103
.97
6.1
112
.97
8.3
112
.97
9.8
112
.97
11.7 112
.97
14.0 112
1.1
6.1
121
1.1
8.3
121
1.1
9.8
121
1.1
11.7 121
1.1
14.0 121
–
B
(cm)
C
(cm)
D
(cm)
.34
.69
1.0
.69
1.0
.69
.34
.34
.34
.69
.69
1.4
27
23
17
27
23
31
36
29
23
36
28
41
51
31
31
42
33
52
69
94
109
94
109
89
.34
.69
1.0
1.0
.34
.69
.34
.34
.34
.69
.69
.69
18
13
10
13
23
15
19
15
13
15
28
22
20
19
17
20
30
23
74
91
145
109
84
94
.21
.34
.69
1.0
1.0
.34
.69
.34
.34
.34
.34
.69
.69
.69
20
18
9
9
15
24
18
25
19
13
10
19
25
20
36
23
15
14
24
29
23
46
61
74
76
99
69
69
.21
.34
.69
1.0
1.0
.34
.69
.34
.34
.34
.34
.69
.69
.69
25
22
18
19
22
28
22
32
25
24
25
25
32
27
37
30
30
28
29
38
29
74
84
86
84
84
81
84
.21
.34
.69
1.0
.34
.69
1.0
.34
.34
.34
.34
.69
.69
.69
18
28
28
18
25
36
41
28
32
33
18
32
38
41
41
36
34
20
33
43
46
86
96
107
114
84
102
127
.21
.34
.69
1.0
.34
.69
1.0
.34
.34
.34
.34
.69
.69
.69
25
19
18
15
19
17
17
34
24
20
17
28
23
20
38
25
22
18
30
25
22
53
71
84
99
66
74
94
Add DF to part number for “Drip Free™” set-ups. Example: SU-HTE60D-DF.
The operating pressures and flow rates are based on spraying water and air at room temperature.
Adjustments may need to be made to accommodate other liquids with different characteristics.
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F20
Pressure Spray Set-ups, External Mix,
High Transfer Efficiency (HTE), 1/4J Series
Performance Data
Flat Spray (External Mix)
SU-HTE62F
SU-HTE64C
SU-HTE64D
SU-HTE64E
SU-HTE64F
Fluid Cap
PF16100
+
Air Cap
LP120262-90
Fluid Cap
PF35100
+
Air Cap
LP130210060
Fluid Cap
PF28100
+
Air Cap
LP130210060
Fluid Cap
PF20100
+
Air Cap
LP130210060
Fluid Cap
PF16100
+
Air Cap
LP130210060
Liquid Capacity (liters per hour)* and Air Capacity (liters per minute)*
Spray
Dimensions
Liquid Pressure
0.3
0.7
1
1.4
2.1
Air
Air
Air
Air
Air
Air
Air
Air
Air
Air
A
l/h
l/h
l/h
l/h
l/h
Air* Liquid*
Press.
l/min Press.
l/min Press.
l/min Press.
l/min Press.
l/min
(cm)
B
(cm)
C
(cm)
D
(cm)
.28
3.8
57
–
–
–
–
–
–
–
–
–
–
–
–
.21
.34
23
28
32
66
.41
3.8
70
.41
5.3
70
–
–
–
–
–
–
–
–
–
.34
.34
22
24
27
71
.55
3.8
82
.55
5.3
82
.55
6.4
82
.55
7.6
82
–
–
–
.69
.34
15
19
22
61
.69
3.8
93
.69
5.3
93
.69
6.4
93
.69
7.6
93
.69
9.1
93
1.0
.34
17
19
23
64
103
.34
.69
23
28
32
66
112
.69
.69
20
23
30
66
.69
19
23
28
66
76
.83
.97
3.8
3.8
103
112
.83
.97
5.3
5.3
103
112
.83
.97
6.4
6.4
103
112
.83
.97
7.6
7.6
103
112
.83
.97
9.1
9.1
1.1
5.3
121
1.1
6.4
121
1.1
7.6
121
1.1
9.1
121
1.0
17.8 112
–
–
–
–
–
–
–
–
–
–
–
–
.34
.34
30
41
48
.55
17.8 132
.55
25
132
–
–
–
–
–
–
–
–
–
.69
.34
28
29
38
86
.69
17.8 151
.69
25
151
–
–
–
–
–
–
–
–
–
1.0
.34
15
23
25
112
.83
17.8 168
.83
25
168
.83
31
168
–
–
–
–
–
–
.34
.69
36
41
48
74
.97
17.8 185
.97
25
185
.97
31
185
.97
36
185
.97
43
185
.69
.69
30
41
46
89
.69
20
30
33
104
1.1
3.8
.41
121
1.1
17.8 201
1.1
25
201
1.1
31
201
1.1
36
201
1.1
43
201
1.0
.41
11.4 112
–
–
–
–
–
–
–
–
–
–
–
–
.34
.34
28
33
36
99
.55
11.4 132
.55
15.9 132
–
–
–
–
–
–
–
–
–
.69
.34
20
25
33
102
.69
11.4 151
.69
15.9 151
.69
–
–
–
–
–
–
1.0
.34
18
20
28
127
–
.34
.69
28
30
46
76
.69
20
28
36
104
.83
11.4 168
.83
15.9 168
.83
19.3 151
19.3 168
–
–
–
–
–
.97
11.4 185
.97
15.9 185
.97
19.3 185
.97
23
185
–
–
–
.69
1.1
11.4 201
1.1
15.9 201
1.1
19.3 201
1.1
23
201
1.1
27
201
1.0
.69
18
20
33
135
.28
6.1
90
–
–
–
–
–
–
–
–
–
–
–
–
.21
.34
18
23
28
58
.41
6.1
112
–
–
–
–
–
–
–
–
–
–
–
–
.34
.34
17
17
22
64
.55
6.1
132
.55
8.3
132
–
–
–
–
–
–
–
–
–
.69
.34
13
13
15
84
.69
6.1
151
.69
8.3
151
.69
9.8
151
.69
11.7 151
.69
14.0 151
1.0
.34
13
13
14
99
.83
6.1
168
.83
8.3
168
.83
9.8
168
.83
11.7 168
.83
14.0 168
.34
.69
19
22
23
74
14.0 185
.69
.69
14
17
19
89
14.0 201
1.0
.69
14
17
18
109
.97
6.1
185
.97
8.3
185
.97
9.8
185
.97
11.7 185
1.1
6.1
201
1.1
8.3
201
1.1
9.8
201
1.1
.28
3.8
90
–
–
–
–
–
–
–
–
–
–
–
–
.21
.34
23
28
34
69
.41
3.8
112
.41
5.3
112
–
–
–
–
–
–
–
–
–
.34
.34
18
23
29
69
.55
3.8
132
.55
5.3
132
.55
6.4
132
.55
7.6
132
–
–
–
.69
.34
17
20
25
76
.69
3.8
151
.69
5.3
151
.69
6.4
151
.69
7.6
151
.69
9.1
151
1.0
.34
14
18
22
76
.83
3.8
168
.83
5.3
168
.83
6.4
168
.83
7.6
168
.83
9.1
168
.34
.69
23
28
34
71
.97
3.8
185
.97
5.3
185
.97
6.4
185
.97
7.6
185
.97
9.1
185
.69
.69
19
23
25
74
201
1.0
.69
14
18
22
74
1.1
3.8
201
1.1
5.3
201
1.1
6.4
201
1.1
11.7 201
.97
7.6
201
1.1
1.1
9.1
Add DF to part number for “Drip Free™” set-ups. Example: SU-HTE60D-DF.
The operating pressures and flow rates are based on spraying water and air at room temperature.
Adjustments may need to be made to accommodate other liquids with different characteristics.
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F21
Air Atomizing
Nozzles
Spray
Set-up
No.
Spray
Set-up
Consists of
Fluid and
Air Cap
Combination
*At the stated pressure in bar.
Air Atomizing Nozzles
Pressure Spray Set-ups, External Mix,
High Transfer Efficiency (HTE), 1/4J Series
Performance Data
Round Spray (External Mix)
Spray
Set-up
No.
Spray
Set-up
Consists of
Fluid and
Air Cap
Combination
SU-HTE91A
Fluid Cap
PF2850
+
Air Cap
LP60650-60
SU-HTE91B
Fluid Cap
PF2050
+
Air Cap
LP60650-60
SU-HTE91C
Fluid Cap
PF1650
+
Air Cap
LP60650-60
*At the stated pressure in bar.
Liquid Capacity (liters per hour)* and Air Capacity (liters per minute)*
Spray
Dimensions
Liquid Pressure
0.3
0.7
1
1.4
2.1
Air
Air
Air
Air
Air
Air
Air
Air
Air
Air
A
l/h
l/h
l/h
l/h
l/h
Air* Liquid*
Press.
l/min Press.
l/min Press.
l/min Press.
l/min Press.
l/min
(cm)
.28
.41
.55
.69
.83
.97
1.1
.28
.41
.55
.69
.83
.97
1.1
.41
.55
.69
.83
.97
1.1
11.4
11.4
11.4
11.4
11.4
11.4
11.4
6.1
6.1
6.1
6.1
6.1
6.1
6.1
3.8
3.8
3.8
3.8
3.8
3.8
54
71
82
96
108
116
127
54
71
82
96
108
116
127
71
82
96
108
116
127
–
.41
.55
.69
.83
.97
1.1
–
–
.55
.69
.83
.97
1.1
–
.55
.69
.83
.97
1.1
–
15.9
15.9
15.9
15.9
15.9
15.9
–
–
8.3
8.3
8.3
8.3
8.3
–
5.3
5.3
5.3
5.3
5.3
–
71
82
96
108
116
127
–
–
82
96
108
116
127
–
82
96
108
116
127
–
–
.55
.69
.83
.97
1.1
–
–
–
.69
.83
.97
1.1
–
–
–
–
.97
1.1
–
–
19.3
19.3
19.3
19.3
19.3
–
–
–
9.8
9.8
9.8
9.8
–
–
–
–
6.4
6.4
–
–
82
96
108
116
127
–
–
–
96
108
116
127
–
–
–
–
116
127
–
–
.55
.69
.83
.97
1.1
–
–
–
.69
.83
.97
1.1
–
–
–
–
.97
1.1
–
–
23
23
23
23
23
–
–
–
11.7
11.7
11.7
11.7
–
–
–
–
7.6
7.6
–
–
82
96
108
116
127
–
–
–
96
108
116
127
–
–
–
–
116
127
–
–
.55
.69
.83
.97
1.1
–
–
–
–
–
.97
1.1
–
–
–
–
–
–
–
–
27
27
27
27
27
–
–
–
–
–
14.0
14.0
–
–
–
–
–
–
–
–
82
96
108
116
127
–
–
–
–
–
116
127
–
–
–
–
–
–
B
(cm)
C
D
(cm) (cm)
.21
.34
.69
1.0
.34
.69
1.0
.34
.34
.34
.34
.69
.69
.69
3
9
5
5
6
4
3
8
9
9
9
11
6
6
9
13
10
13
14
9
10
112
102
109
112
99
104
119
.21
.34
.69
1.0
.34
.69
1.0
.34
.34
.34
.34
.69
.69
.69
5
6
5
5
6
5
5
9
8
9
8
8
9
8
11
9
13
13
9
13
13
104
107
107
124
107
107
124
.34
.69
1.0
.34
.69
1.0
.34
.34
.34
.69
.69
.69
9
10
10
5
8
8
10
11
13
10
10
9
13
14
15
11
11
13
86
97
117
89
97
132
Add DF to part number for “Drip Free™” set-ups. Example: SU-HTE60D-DF.
The operating pressures and flow rates are based on spraying water and air at room temperature.
Adjustments may need to be made to accommodate other liquids with different characteristics.
Ordering Info
Complete Nozzle Assembly
Nozzle Body*
1/4
l
Inlet
Conn.
Spray Set-up Only
Spray Set-up
Spray Set-up
J – SS + SU-HTE60D – SS
l
l
l
l
Nozzle
No.
Material
Code
Spray
Set-up Number
Material
Code
HTE60D –
l
Spray
Set-up Number
SS
l
Material
Code
BSPT connections require the addition of a “B” prior to the nozzle body inlet connection.
*To order fluid cap only, use fluid cap number (shown in performance data charts and material code).
To order air cap only, use air cap number (shown in performance data charts and material code).
To order spray nozzle without set-up, use inlet connection, nozzle body and material code.
To order Drip Free set-ups, add DF after set-up number: SU-HTE60D-DF – SS.
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F22
Siphon/Gravity-Fed Spray Set-ups,
External Mix, 1/8J and 1/4J Series
Features and Benefits
Air Caps
• For round and flat sprays, angle “A” is maintained throughout distance “B”. Beyond “B”, the spray
becomes turbulent and will project out to distance “D”.
• When using a siphon or gravity-fed liquid system, the liquid is supplied by either a liquid siphon or a
gravity-feed.
Round spray and flat spray
air caps produce round spray
and flat spray patterns.
• Designed to draw liquid through the feed line into the air flow where it is atomized.
Round spray
pattern
A
B
D
1158 retainer ring and 3612 gasket must be ordered separately from the spray set-up, but are
included in the standard nozzle assembly. Please contact your sales engineer.
Air Atomizing
Nozzles
Refer to page F3 for Siphon/Gravity-Fed Spray Set-ups diagram.
Performance Data
Flat Spray
Spray
Set-up
No.
SUF1
SUF2C
SUF3B
SUF4B
Spray
Set-up
Consists of
Fluid and
Air Cap
Combination
Fluid Cap 2850
+
Air Cap 73420
Fluid Cap 35100
+
Air Cap 120432
Fluid Cap 40100
+
Air Cap 122435
Fluid Cap 40100
+
Air Cap 122440
*At the stated pressure in bar.
Atomizing
Air
Liquid Capacity
(liters per hour)*
Spray Dimensions
at 20 cm Siphon Height
Air
Press.
Air
Capacity
l/min
45
30
15
10
20
30
60
90
.70
28
1.3
1.2
1.1
1.0
.95
.83
.64
.49
1.5
43
1.2
1.1
1.0
.90
.86
.78
.66
.54
2.0
50
.82
.76
.68
.57
.50
–
–
–
1.5
56
3.7
3.5
3.3
2.9
2.8
2.5
2.3
2.1
2.0
65
3.4
3.3
3.1
2.8
2.7
2.6
2.4
2.2
3.0
87
2.8
2.7
2.5
2.4
2.2
2.1
1.9
1.7
4.0
110
1.9
1.8
1.6
1.5
1.3
1.2
–
1.5
68
5.1
4.8
4.5
3.8
3.7
3.5
3.0
2.0
78
4.9
4.7
4.4
3.6
3.4
3.2
2.9
2.3
3.0
103
3.4
3.2
3.0
2.2
2.0
1.7
–
–
3.5
117
2.2
2.0
1.7
–
–
–
–
1.5
63
7.6
7.2
6.6
5.7
5.4
5.1
2.0
73
7.6
7.3
6.8
5.9
5.7
3.0
96
6.4
6.1
5.7
5.0
3.5
110
4.2
3.7
3.2
2.6
Gravity Head (cm)
Siphon Height (cm)
Air*
A
(cm)
B
(cm)
C
(cm)
D
(m)
.70
1.5
2.0
20
21
23
26
29
30
38
38
38
2.1
2.1
1.8
–
1.5
2.0
3.0
4.0
23
24
27
28
32
34
37
39
38
42
46
48
2.7
2.7
3.0
2.7
2.4
1.5
19
23
27
3.4
2.0
20
25
28
3.4
–
3.0
22
27
30
3.0
4.6
3.7
1.5
17
22
27
3.4
5.5
5.0
4.2
4.5
4.1
3.3
–
2.0
18
23
29
3.4
–
–
–
–
3.0
20
27
33
3.4
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F23
Air Atomizing Nozzles
Siphon/Gravity-Fed Spray Set-ups,
External Mix, 1/8J and 1/4J Series
Performance Data
Round Spray
Spray
Set-up
No.
SU1A
SU1
SU2A
SU2
SU4
SU5
Spray
Set-up
Consists of
Fluid and
Air Cap
Combination
Fluid Cap 1650
+
Air Cap 64
Fluid Cap 2050
+
Air Cap 64
Fluid Cap 2050
+
Air Cap 70
Fluid Cap 2850
+
Air Cap 70
Fluid Cap 60100
+
Air Cap 120
Fluid Cap 100150
+
Air Cap 180
*At the stated pressure in bar.
Atomizing
Air
Liquid Capacity
(liters per hour)*
Spray Dimensions
at 20 cm Siphon Height
Air
Press.
Air
Capacity
l/min
45
30
15
10
20
30
.70
11.3
1.5
1.3
1.1
.87
.68
1.5
17.0
1.8
1.7
1.5
1.3
1.2
3.0
28
2.1
1.9
1.7
1.5
4.0
36
2.2
2.0
1.8
.70
13.3
2.4
2.1
1.7
1.5
20
2.8
2.6
3.0
32
3.4
4.0
41
.70
23
1.5
3.0
Gravity Head (cm)
Siphon Height (cm)
Air*
Spray
Angle
A (°)
B
(cm)
D
(m)
60
90
.53
–
–
.70
18
28
1.8
1.1
.62
–
1.5
18
28
1.9
1.4
1.3
1.1
.76
3.0
18
30
2.3
1.6
1.5
1.4
1.2
.87
4.0
18
36
2.6
1.5
1.2
.79
–
–
.70
18
30
2.1
2.4
2.1
1.9
1.6
.91
–
1.5
18
33
2.3
3.1
2.9
2.8
2.6
2.4
1.7
1.1
3.0
18
38
2.6
3.7
3.4
3.3
3.1
2.9
2.7
2.1
1.5
4.0
19
43
3.0
2.5
2.3
2.0
1.6
1.4
1.1
–
–
.70
18
30
2.4
36
2.9
2.8
2.5
2.2
2.0
1.7
.89
–
1.5
18
33
2.7
58
3.4
3.3
3.2
2.9
2.8
2.5
1.9
1.2
3.0
19
38
3.4
4.0
74
3.7
3.6
3.5
3.4
3.3
3.0
2.5
2.0
4.0
20
43
4.0
.70
19.3
4.5
4.0
3.4
2.1
1.8
1.4
–
–
.70
21
38
3.0
1.5
31
5.3
4.9
4.4
3.5
2.9
2.7
1.8
–
1.5
21
41
3.4
3.0
50
6.0
5.6
5.0
4.4
4.0
3.4
2.4
1.2
3.0
21
46
4.0
4.0
65
5.7
5.4
5.0
4.2
3.9
3.5
2.8
1.9
4.0
22
51
4.6
1.5
58
22
19.9
16.3
12.3
10.5
8.3
2.8
–
1.5
17
46
3.7
3.0
88
25
23
19.5
16.7
14.2
11.5
6.4
2.8
3.0
18
51
4.3
4.0
111
26
24
21
18.4
15.7
12.9
7.9
4.5
4.0
18
53
4.9
5.6
147
26
24
22
19.7
17.0
14.6
9.8
6.1
5.6
19
58
5.5
2.0
144
–
–
–
27
22
16.8
–
–
2.0
20
51
6.7
3.0
190
–
–
–
30
26
21
–
–
3.0
20
53
7.0
4.0
240
–
43
40
31
28
23
11.0
–
4.0
21
58
7.6
5.6
315
44
42
39
31
28
24
16.7
8.3
5.6
22
63
8.2
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F24
Overview, 1/8JJ Compact Series
1/8JJ Series air atomizing
Spray set-up
1/8JJ
1
2
3
4
5
Spray set-up
1/8JJCO
Clean-out
needle assembly 14471
1
2
3
4
7
6
1/8JJN
1. Retainer ring CP12582
2. Air cap
3. Fluid cap
4. O-ring 7717-2/007
5. Nozzle body CP12891
6. Nozzle body CP14468
7. Back Seal Gasket 7222-BUC
Shut-off
needle assembly 14486
1/8JJAU – Drip Free
Shut-off/clean-out
needle assembly
Applying lubricant to form presses in steel drum manufacturing.
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F25
Air Atomizing
Nozzles
Spray Set-up for Drip Free™
Air Atomizing Nozzles
Nozzle Bodies/Nozzle Assemblies,
1/8JJ Compact Series
Features and Benefits
Optimization Tips
• Nozzle assembly consists of a body and spray set-up.
• See page F2 for optimization tips.
• Various assemblies can be added to provide shut-off or
clean-out functions.
See Also
• 1/8JJ has liquid and air feeds at opposite ends of the body.
• 1/8JJN features a manual shut-off needle that enables the flow
of liquid to be stopped.
• Accessories
– Air line filters
• 1/8JJCO features a clean-out needle that is activated manually.
– Needle slides through the liquid orifice to clear obstructions.
– Ideal for intermittent spraying applications when liquid can
dry in the orifice between uses.
1/8JJ
1/8JJN
1/8" NPT or BSPT
Material
– Pressure gauges
– Air pressure regulators
– Solenoid valves
– Liquid pressure regulators
– Strainers
1/8JJCO
1/8" NPT or BSPT with
shut-off needle
Materials
http://
1/8" NPT or BSPT with
clean-out needle
Ordering Info
Complete Nozzle Assembly
Nozzle Type
Material
Code
JJ JJN JJCO
Nozzle Body*
Spray Set-up Only
Spray Set-up
Spray Set-up
1/8 JJN – SS + SUJ12A – SS
Nozzle Bodies
Electroless Nickelplated Brass
(none)
l
l
l
303 Stainless Steel
SS
l
l
l
Spray Set-ups
l
l
l
l
l
Inlet
Conn.
Nozzle
Body
Assembly
Type
Material
Code
Spray
Set-up
No.
Material
Code
*Includes retainer and gasket.
Electroless Nickelplated Brass Air
Cap and
303 Stainless Steel
Fluid Cap
SSBR
303 Stainless Steel
SS
l
l
l
BSPT connections require the addition of a “B” prior to
the nozzle body inlet connection.
SUJ12A
l
Spray
Set-up
No.
–
SS
l
Material
Code
To order spray set-up only,
use spray set-up number and
material code: SU12A-SS.
To order fluid cap only, use fluid cap number (shown in
performance data charts) and material code: J2050-SS.
l
l
l
To order air cap only, use air cap number (shown in
performance data charts) and material code: J73160-SS.
To order spray nozzle without set-up, use inlet
connection, nozzle body and material code: 1/8JJN-SS.
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F26
Pressure Spray Set-ups, Internal Mix,
1/8JJ Compact Series
Features and Benefits
Air Caps
• For round spray pattern, angle “A” is maintained throughout distance “B”. Beyond “B”, the spray
becomes turbulent and will project out to distance “D”.
• When using a pressure-fed liquid system, the liquid is supplied to the nozzle under pressure.
• The liquid and compressed air or gas are mixed internally to produce a completely atomized spray.
Round spray and 360° circular
spray air caps produce full cone
round spray; air caps used in
spray set-up SUJ340C produce
360° circular spray pattern.
Round spray
pattern
A
B
D
12582 retainer ring and 7717-2/007 O-ring must be ordered separately from the spray set-up, but are included in
the standard nozzle assembly. Please contact your sales engineer.
Round Spray
Spray
Set-up
No.
Spray
Set-up
Consists of
Fluid and
Air Cap
Combination
SUJ11
Fluid Cap
J2050
+
Air Cap
J67147
SUJ12A
Fluid Cap
J2050
+
Air Cap
J73160
Air Atomizing
Nozzles
Performance Data
*At the stated pressure in bar.
Liquid Capacity (liters per hour)* and Air Capacity (liters per minute)*
Spray
Dimensions
Liquid Pressure
0.7
1.5
2
3
4
Air
Air
Air
Air
Air
Air
Air
Air
Air
Air Air*
l/h
l/h
l/h
l/h
l/h
Press.
l/min Press.
l/min Press.
l/min Press.
l/min Press.
l/min
Liquid*
Spray
Angle
A (°)
B
(cm)
D
(m)
.70
2.5
15.6
1.1
6.4
11.9
1.4
6.4
13.9
2.7
6.2
23
3.5
7.8
28
.85
.70
13
30
2.7
.85
1.8
19.0
1.4
5.0
15.0
1.7
5.5
16.7
2.8
5.7
25
3.7
7.3
29
1.7
1.5
13
33
3.0
1.0
1.4
22
1.7
4.1
18.7
2.0
4.5
19.8
3.0
5.2
27
3.9
6.4
33
2.5
2.0
13
36
3.4
4.5
43
3.1
3.0
14
39
3.8
–
–
–
2.0
3.0
23
2.4
3.0
26
3.2
4.3
31
4.5
–
–
–
2.2
2.0
27
2.7
2.3
31
3.7
3.0
38
4.8
3.7
47
4.5
4.0
15
44
4.4
.70
2.5
18.7
1.4
5.7
27
1.7
6.7
29
2.2
9.2
34
2.8
11.9
39
.85
.70
12
43
3.7
.85
2.0
22
1.5
5.2
29
1.8
6.4
31
2.5
8.2
39
3.1
11.0
43
1.5
1.5
13
46
4.0
1.0
1.6
26
1.7
4.8
32
2.0
5.9
34
2.8
7.2
44
3.4
10.1
47
2.4
2.0
13
48
4.3
–
–
–
2.0
3.9
37
2.2
4.8
40
3.1
6.3
49
3.9
8.4
58
3.0
3.0
13
51
4.6
–
–
–
2.1
3.4
40
2.7
3.6
48
3.4
5.5
55
4.5
6.8
68
3.9
4.0
15
56
5.2
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F27
Air Atomizing Nozzles
Pressure Spray Set-ups, Internal Mix,
1/8JJ Compact Series
Performance Data
Round Spray
Spray
Set-up
No.
SUJ12
SUJ22B
SUJ22
Spray
Set-up
Consists of
Fluid and
Air Cap
Combination
Fluid Cap
J2850
+
Air Cap
J73160
Fluid Cap
J40100
+
Air Cap
J1401110
Fluid Cap
J60100
+
Air Cap
J1401110
*At the stated pressure in bar.
Liquid Capacity (liters per hour)* and Air Capacity (liters per minute)*
0.7
1.5
2
3
Spray
Set-up
No.
SUJ340C
Fluid Cap
J60100
+
Air Cap
J150-6-62160HC
4
Air
Air
Air
Air
Air
Air
Air
Air
Air
l/h
l/h
l/h
l/h
Press.
l/min Press.
l/min Press.
l/min Press.
l/min Press.
l/h
Air Air* Liquid*
l/min
Spray
Angle
A (°)
B
(cm)
D
(m)
.85
4.8
21
1.7
8.4
31
2.0
10.7
33
2.7
16.5
37
3.4
20
43
1.5
.70
12
48
4.0
1.1
4.1
27
1.8
7.5
35
2.1
9.8
37
2.8
15.4
38
3.7
18.4
47
2.5
1.5
13
51
4.3
1.4
3.4
33
2.0
7.0
37
2.4
8.2
42
3.1
13.6
43
3.9
16.8
50
3.0
2.0
13
53
4.6
1.7
3.0
39
2.5
4.8
49
3.0
5.9
55
3.7
10.4
55
4.5
13.8
60
3.4
3.0
14
56
4.9
4.0
15
60
5.3
4.1
65
4.2
7.9
65
4.9
11.8
68
4.2
20
136
3.4
32
149
4.6
37
190
1.7
.70
18
66
4.9
16.3 149
3.9
25
170
5.3
29
220
2.8
1.5
20
76
6.1
15.9 205
5.6
25
235
3.9
2.0
20
81
6.7
3.0
21
91
7.9
2.0
2.8
44
3.1
3.6
59
3.5
1.1
13.0
76
2.2
17.8 116
2.8
1.4
8.9
91
2.5
13.1 130
3.1
1.5
7.2
98
2.8
9.5
3.4
11.9 163
4.6
143
1.8
4.7
112
3.4
4.9
171
4.2
4.7
205
5.6
6.8
255
6.3
17.4
270
5.3
2.1
2.7
127
3.5
4.2
178
4.6
3.0
220
6.3
3.6
290
7.0
11.0
305
6.0
4.0
21
97
9.1
.85
31
57
1.4
61
69
2.1
53
96
2.7
80
103
3.8
88
135
1.0
.70
17
61
4.9
1.0
25
66
1.5
54
76
2.4
41
112
3.0
69
117
4.2
73
156
1.8
1.5
18
69
5.8
1.1
18.5
75
1.7
48
85
2.7
31
127
3.2
59
130
4.6
61
176
2.8
2.0
20
76
6.7
1.3
12.9
85
2.0
35
102
2.8
26
136
3.7
44
154
5.3
39
215
3.5
3.0
20
79
7.0
–
–
–
2.2
25
119
3.0
22
144
3.9
35
170
6.0
23
260
4.9
4.0
21
91
8.5
360° Circular Spray†
Spray
Set-up
Consists of
Fluid and
Air Cap
Combination
Spray
Dimensions
Liquid Pressure
*At the stated pressure in bar.
Liquid Capacity (liters per hour)* and Air Capacity (liters per minute)*
Liquid Pressure
0.7
1.5
2
3
4
Air
Air
Air
Air
Air
Air
Air
Air
Air
l/h
l/h
l/h
l/h
Press.
l/min Press.
l/min Press.
l/min Press.
l/min Press.
1.4
15.1
69
2.8
19.5 142
3.5
1.5
10.6
77
3.0
16.1 153
1.7
7.6
84
3.1
13.2 165
1.8
5.7
93
3.2
2.0
4.2
103
3.4
Air
l/min
185
4.2
48
210
6.0
45
340
3.7
17.6 196
4.6
37
240
6.3
37
375
3.8
14.8 210
4.9
28
275
6.7
30
405
10.6 177
3.9
12.5 220
5.6
15.5 340
7.0
24
440
8.3
4.2
8.1
6.3
7.8
–
–
–
188
21
l/h
245
425
360° circular spray pattern
†Use only with 1/8JJAU automatic air atomizing nozzles.
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F28
Pressure Spray Set-ups, Internal Mix,
1/8JJ Compact Series
Features and Benefits
Air Caps
• For wide angle round and flat sprays, dimensions “A”, “B” and “C” are the pattern widths at
distances from the nozzle.
• The total distance of spray projection from the nozzle to the maximum dispersal point is
represented by “D”.
• When using a pressure-fed liquid system, the liquid is supplied to the nozzle under pressure.
Wide angle round and flat spray
air caps produce hollow cone
type, wide angle round spray
and flat spray patterns.
• The liquid and compressed air or gas are mixed internally to produce a completely atomized spray.
C
B
A
Wide angle round
spray pattern
6"
(15 cm)
9" (23 cm)
15" (38 cm)
D
Air Atomizing
Nozzles
12582 retainer ring and 7717-2/007 O-ring must be ordered separately from the spray set-up, but are included in
the standard nozzle assembly. Please contact your sales engineer.
Performance Data
Wide Angle Round Spray
Spray
Set-up
No.
SUJ16
Spray
Set-up
Consists of
Fluid and
Air Cap
Combination
Fluid Cap
J2050
+
Air Cap
J67-6-20-70°
Fluid Cap
J40100
SUJ26B
+
Air Cap
J140-6-37-70°
Fluid Cap
J60100
SUJ26
+
Air Cap
J140-6-37-70°
Fluid Cap
J60100
SUJ29
+
Air Cap
J140-6-52-70°
Fluid Cap
J40100
SUJ30
+
Air Cap
J120-6-35-60°
*At the stated pressure in bar.
Liquid Capacity (liters per hour)* and Air Capacity (liters per minute)*
Spray
Dimensions
Liquid Pressure
0.7
1.5
2
3
4
Air
Air
Air
Air
Air
Air
Air
Air
Air
Air
A
l/h
l/h
l/h
l/h
l/h
Air* Liquid*
Press.
l/min Press.
l/min Press.
l/min Press.
l/min Press.
l/min
(cm)
.60
.70
.85
1.0
–
.85
1.0
–
–
–
.70
.85
1.0
–
–
1.3
1.5
1.8
2.1
2.4
1.1
1.3
1.4
1.7
2.0
5.3
4.3
3.0
1.7
–
7.0
2.1
–
–
–
24
13.6
7.6
–
–
36
29
23
16.7
11.4
12.3
9.9
7.9
4.9
3.1
10.2
12.2
14.2
17.0
–
50
62
–
–
–
32
44
57
–
–
85
102
117
133
149
40
45
50
58
67
1.1
1.3
1.4
1.7
1.8
1.7
1.8
–
–
–
1.4
1.5
1.7
1.8
–
2.1
2.4
2.7
3.2
4.2
2.2
2.5
2.8
3.1
3.4
8.1
7.0
6.4
4.5
3.5
13.2
9.8
–
–
–
43
35
28
21
–
57
51
45
33
13.6
16.3
12.1
8.9
6.4
4.7
13.3
15.0
17.0
22
24
68
79
–
–
–
37
49
61
71
–
116
130
143
170
220
62
71
79
87
95
1.5
1.8
2.1
2.4
–
2.0
2.1
2.2
–
–
2.1
2.2
2.4
2.5
–
3.1
3.2
3.4
3.9
4.9
2.7
3.0
3.2
3.5
4.2
8.1
6.6
4.9
3.2
–
18.5
15.1
11.7
–
–
33
26
18.9
11.7
–
53
50
47
38
18.5
21
16.3
12.3
9.3
4.7
16.4
21
25
29
–
68
76
85
–
–
66
78
89
100
–
156
163
170
194
245
69
78
86
94
115
2.4
2.7
3.0
3.4
3.5
2.8
3.0
3.1
3.4
3.7
2.8
3.0
3.1
3.4
3.7
4.2
4.9
5.6
6.3
7.0
4.2
4.6
4.9
5.6
6.3
8.9
8.1
6.4
4.2
3.4
25
22
18.5
12.1
6.1
52
46
39
26
13.2
64
51
40
28
17.8
19.3
14.6
10.8
6.2
4.0
22
26
30
37
40
84
92
101
119
142
65
76
87
110
133
197
230
265
300
335
100
113
124
146
167
3.1
3.4
3.9
4.6
4.9
3.7
3.8
3.9
4.2
4.9
3.7
3.8
3.9
4.6
4.9
5.6
6.0
6.3
6.7
7.0
5.6
6.0
6.3
6.7
7.0
10.5
9.7
7.8
4.4
2.8
31
28
26
20
6.8
63
58
52
27
15.9
74
68
62
56
51
22
17.6
14.0
11.4
9.1
24
28
36
47
54
96
105
113
130
183
68
79
101
138
166
245
260
280
295
315
130
142
152
163
174
B
(cm)
C
(cm)
D
(m)
.70
1.4
1.8
3.0
3.9
.70
1.5
2.0
3.0
4.0
14
15
16
16
19
18
19
20
20
23
23
24
25
26
30
1.5
1.8
2.1
2.7
4.0
.85
1.7
2.1
3.2
4.1
.70
1.5
2.0
3.0
4.0
18
19
19
20
21
24
25
25
26
28
31
33
33
34
37
1.8
2.4
3.2
4.1
5.9
.85
1.5
2.4
3.2
3.9
.70
1.5
2.0
3.0
4.0
19
20
20
20
20
25
27
27
28
28
36
37
37
38
39
2.1
3.2
4.1
5.0
6.8
2.0
3.0
3.9
6.0
6.3
.70
1.5
2.0
3.0
4.0
20
20
22
23
24
25
27
28
29
32
33
34
37
38
41
5.5
6.4
8.2
9.1
10.4
1.5
3.0
3.4
5.3
6.3
.70
1.5
2.0
3.0
4.0
15
16
16
18
19
17
20
20
22
24
23
24
24
25
30
2.7
4.6
5.5
7.3
9.4
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F29
Air Atomizing Nozzles
Pressure Spray Set-ups, Internal Mix,
1/8JJ Compact Series
Performance Data
Flat Spray
Spray
Set-up
No.
SUJ13A
SUJ13
SUJ14
SUJ23B
SUJ23
Spray
Set-up
Consists of
Fluid and
Air Cap
Combination
Fluid Cap
J2050
+
Air Cap
J73328
Fluid Cap
J2850
+
Air Cap
J73328
Fluid Cap
J2850
+
Air Cap
J73320
Fluid Cap
J40100
+
Air Cap
J125328
Fluid Cap
J60100
+
Air Cap
J125328
*At the stated pressure in bar.
Liquid Capacity (liters per hour)* and Air Capacity (liters per minute)*
Spray
Dimensions
Liquid Pressure
0.7
1.5
2
3
4
Air
Air
Air
Air
Air
Air
Air
Air
Air
Air
A
l/h
l/h
l/h
l/h
l/h
Air* Liquid*
Press.
l/min Press.
l/min Press.
l/min Press.
l/min Press.
l/min
(cm)
B
(cm)
C
(cm)
D
(m)
.70
5.5
24
1.3
9.1
31
2.0
8.6
42
2.7
11.2
52
3.9
12.0
69
1.1
.70
25
36
46
2.6
.85
4.7
27
1.5
7.7
36
2.2
7.5
47
3.0
10.1
56
4.6
9.7
81
2.1
1.5
36
48
66
3.0
1.0
4.1
31
1.8
6.5
42
2.5
6.2
52
3.2
9.1
62
5.3
7.5
93
2.8
2.0
38
53
76
3.2
1.3
3.0
37
2.4
4.3
52
3.1
4.2
63
4.2
5.4
79
6.3
4.3
110
3.5
3.0
47
61
86
3.4
1.5
2.0
44
2.8
2.8
60
3.4
3.2
68
4.9
3.1
91
7.0
2.4
122
6.0
4.0
56
74
94
4.0
.85
8.2
19.8
1.4
14.4
27
2.1
13.5
36
2.7
19.1
42
4.6
16.1
69
1.1
.70
36
46
71
2.1
1.0
6.8
23
1.7
11.9
32
2.4
11.4
42
3.0
17.1
46
4.9
13.8
76
2.1
1.5
43
61
81
2.4
1.1
5.5
27
2.0
9.5
37
2.7
9.2
47
3.2
15.1
52
5.3
11.5
83
3.0
2.0
51
66
89
2.6
1.3
4.1
30
2.2
7.1
43
3.2
5.0
59
4.2
8.1
72
6.0
7.3
97
3.5
3.0
58
76
97
2.7
1.4
2.9
34
2.5
5.1
49
3.5
3.3
66
4.9
4.0
86
6.7
4.3
112
5.6
4.0
58
76
97
3.2
1.3
3.9
30
2.1
7.4
40
3.0
6.1
52
3.9
9.4
60
5.3
10.2
78
1.5
.70
25
33
46
1.8
1.4
3.0
33
2.4
5.3
45
3.1
5.3
54
4.2
7.2
67
5.6
8.3
84
2.7
1.5
36
51
69
2.0
1.5
2.3
35
2.5
4.4
47
3.2
4.5
57
4.6
5.3
73
6.0
6.6
89
3.2
2.0
58
74
91
2.0
1.8
1.3
41
2.8
3.1
52
3.5
3.2
62
4.9
3.8
80
6.3
5.1
98
4.2
3.0
61
74
94
2.1
2.0
.95
44
3.1
2.1
57
3.9
1.8
68
–
–
–
–
–
–
5.6
4.0
64
76
97
2.3
1.1
11.2
54
2.1
18.0
79
2.7
19.6
93
3.5
27
112
4.6
33
137
1.4
.70
15
18
20
3.0
1.3
8.5
60
2.2
15.8
84
2.8
17.3
98
3.7
25
116
4.9
28
149
2.4
1.5
23
28
33
3.2
1.4
6.5
65
2.4
13.6
89
3.0
15.2 103
3.8
23
121
5.3
27
161
3.0
2.0
25
33
46
3.4
1.5
5.0
71
2.5
11.6
95
3.1
13.2 109
3.9
21
126
5.6
19.7 174
3.7
3.0
30
38
46
3.5
1.7
3.8
77
–
–
–
3.2
11.4 114
4.2
17.0 137
6.3
12.4 200
5.3
4.0
33
41
48
4.0
.85
27
33
1.8
38
55
2.4
39
67
3.2
58
76
4.6
59
106
1.1
.70
18
23
30
3.4
1.0
20
38
2.1
28
66
2.7
30
77
3.5
47
87
5.3
40
132
2.4
1.5
23
30
41
3.5
1.1
15.9
45
2.2
24
71
3.0
24
87
3.8
38
97
5.6
32
145
3.2
2.0
25
33
43
3.7
1.4
10.2
56
2.5
17.8
82
3.4
15.1 103
4.2
27
113
6.3
20
172
3.9
3.0
30
38
48
3.8
1.5
7.6
62
2.7
15.1
87
3.7
10.6 114
4.9
14.8 140
7.0
12.7 198
6.0
4.0
33
41
51
4.4
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F30
Pressure Spray Set-ups, External Mix,
High Capacity, 1/8JJ Compact Series
Features and Benefits
• Offers an increased ability to atomize viscous fluids and allows
for greater capacities of finely atomized sprays.
• The liquid and compressed air or gas are mixed externally to
produce a completely atomized spray.
• Simple, one-piece, low-profile design permits larger air passage.
More air can be brought in to atomize the liquid stream.
• SUJE Spray Set-up Series is both compact and air efficient.
• Atomization can be controlled by varying the air pressure without
changing liquid flow rates.
• SUJE Series features lower spray velocity for improved transfer and
reduced misting and is ideal for applications where space is limited.
• Offered in three spray angles – 50°, 65° and 90°.
• When using a pressure-fed liquid system, the liquid is supplied to
the nozzle under pressure.
• Very efficient use of air results in reduced air consumption costs
and noise levels.
C
B
CP46259 retainer ring and
CP7717-2/007-VI O-ring must be
ordered separately from the spray
set-up, but are included in the
standard nozzle assembly. The 46599
adapter is used with all 1/8JJ nozzle
bodies and automatic spray guns
with extensions, but not on 1/8JJAU
spray guns without extensions.
Please contact your sales engineer.
A
Flat spray
pattern
External mix air caps
produce a flat spray pattern.
6"
(15 cm)
9" (23 cm)
15" (38 cm)
D
Performance Data
Flat Spray (External Mix)
Spray
Set-up
No.
Spray
Set-up
Consists of
Fluid and
Air Cap
Combination
SUJE416-50
Fluid Cap
PFJ1650
+
Air Cap
PAJ105-50
SUJE417-50
Fluid Cap
PFJ2050
+
Air Cap
PAJ105-50
SUJE418-50
Fluid Cap
PFJ2850
+
Air Cap
PAJ105-50
SUJE420-50
Fluid Cap
PFJ40100
+
Air Cap
PAJ135-50
SUJE421-50
Fluid Cap
PFJ60100
+
Air Cap
PAJ135-50
*At the stated pressure in bar.
Liquid Capacity (liters per hour)* and Air Capacity (liters per minute)*
Liquid Pressure
0.7
Air
Press.
0.7
1.4
2.1
2.8
3.4
0.7
1.4
2.1
2.8
3.4
0.7
1.4
2.1
2.8
3.4
0.7
1.4
2.1
2.8
3.4
2.1
2.8
3.4
4.1
4.8
l/h
4.9
4.9
4.9
4.9
4.9
7.2
7.2
7.2
7.2
7.2
11.0
11.0
11.0
11.0
11.0
44.3
44.3
44.3
44.3
44.3
–
–
–
–
–
1.5
2
2.5
Air
Air
Air
Air
Air
Air
Air
l/h
l/h
l/h
l/min Press.
l/min Press.
l/min Press.
l/min
65.1
0.7
7.4 65.1
0.7
8.4 65.1
0.7
9.2 65.1
104.8
1.4
7.4 104.8
1.4
8.4 104.8
1.4
9.2 104.8
141.6
2.1
7.4 141.6
2.1
8.4 141.6
2.1
9.2 141.6
175.6
2.8
7.4 175.6
2.8
8.4 175.6
2.8
9.2 175.6
209.5
3.4
7.4 209.5
3.4
8.4 209.5
3.4
9.2 209.5
65.1
0.7
10.8 65.1
0.7
12.3 65.1
0.7
13.5 65.1
104.8
1.4
10.8 104.8
1.4
12.3 104.8
1.4
13.5 104.8
141.6
2.1
10.8 141.6
2.1
12.3 141.6
2.1
13.5 141.6
175.6
2.8
10.8 175.6
2.8
12.3 175.6
2.8
13.5 175.6
209.5
3.4
10.8 209.5
3.4
12.3 209.5
3.4
13.5 209.5
65.1
0.7
23.4 65.1
0.7
27.8 65.1
0.7
31.1 65.1
104.8
1.4
23.4 104.8
1.4
27.8 104.8
1.4
31.1 104.8
141.6
2.1
23.4 141.6
2.1
27.8 141.6
2.1
31.1 141.6
175.6
2.8
23.4 175.6
2.8
27.8 175.6
2.8
31.1 175.6
209.5
3.4
23.4 209.5
3.4
27.8 209.5
3.4
31.1 209.5
65.1
0.7
47.7 65.1
0.7
54.4 65.1
0.7
61.5 65.1
104.8
1.4
47.7 104.8
1.4
54.4 104.8
1.4
61.5 104.8
141.6
2.1
47.7 141.6
2.1
54.4 141.6
2.1
61.5 141.6
172.7
2.8
47.7 172.7
2.8
54.4 172.7
2.8
61.5 172.7
206.7
3.4
47.7 206.7
3.4
54.4 206.7
3.4
61.5 206.7
–
2.1
–
–
2.1
–
–
2.1
–
–
–
2.8
–
–
2.8
–
–
2.8
–
–
–
3.4
–
–
3.4
–
–
3.4
–
–
–
4.1
–
–
4.1
–
–
4.1 122.3 240.7
–
4.8
–
–
4.8
–
–
4.8 122.3 274.7
Spray
Angle
50°
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F31
Air Atomizing
Nozzles
• Simple four-part assembly allows easy installation and maintenance.
Air Caps
Air Atomizing Nozzles
Pressure Spray Set-ups, External Mix,
High Capacity, 1/8JJ Compact Series
Performance Data
Flat Spray (External Mix)
Spray
Set-up
No.
Spray
Set-up
Consists of
Fluid and
Air Cap
Combination
SUJE416-65
Fluid Cap
PFJ1650
+
Air Cap
PAJ080-65
SUJE417-65
Fluid Cap
PFJ2050
+
Air Cap
PAJ080-65
*At the stated pressure in bar.
Liquid Capacity (liters per hour)* and Air Capacity (liters per minute)*
Liquid Pressure
0.7
Air
Press.
0.7
1.4
2.1
2.8
3.4
0.7
1.4
2.1
2.8
3.4
0.7
1.4
2.1
2.8
3.4
0.7
1.4
2.1
2.8
3.4
l/h
4.9
4.9
4.9
4.9
4.9
7.2
7.2
7.2
7.2
7.2
11.0
11.0
11.0
11.0
11.0
30.3
30.3
30.3
30.3
30.3
1.5
2
2.5
Air
Air
Air
Air
Air
Air
Air
l/h
l/h
l/h
l/min Press.
l/min Press.
l/min Press.
l/min
53.8
0.7
7.4 53.8
0.7
8.4 53.8
0.7
9.2 53.8
85.0
1.4
7.4 85.0
1.4
8.4 85.0
1.4
9.2 85.0
113.3
2.1
7.4 113.3
2.1
8.4 113.3
2.1
9.2 113.3
141.6
2.8
7.4 141.6
2.8
8.4 141.6
2.8
9.2 141.6
167.1
3.4
7.4 167.1
3.4
8.4 167.1
3.4
9.2 167.1
53.8
0.7
10.8 53.8
0.7
12.3 53.8
0.7
13.5 53.8
85.0
1.4
10.8 85.0
1.4
12.3 85.0
1.4
13.5 85.0
113.3
2.1
10.8 113.3
2.1
12.3 113.3
2.1
13.5 113.3
141.6
2.8
10.8 141.6
2.8
12.3 141.6
2.8
13.5 141.6
167.1
3.4
10.8 167.1
3.4
12.3 167.1
3.4
13.5 167.1
53.8
0.7
23.3 53.8
0.7
27.7 53.8
0.7
31.2 53.8
85.0
1.4
23.3 85.0
1.4
27.7 85.0
1.4
31.2 85.0
113.3
2.1
23.3 113.3
2.1
27.7 113.3
2.1
31.2 113.3
141.6
2.8
23.3 141.6
2.8
27.7 141.6
2.8
31.2 141.6
167.1
3.4
23.3 167.1
3.4
27.7 167.1
3.4
31.2 167.1
59.5
0.7
47.7 59.5
0.7
54.4 59.5
0.7
59.7 59.5
93.5
1.4
47.7 93.5
1.4
54.4 93.5
1.4
59.7 93.5
124.6
2.1
47.7 124.6
2.1
54.4 124.6
2.1
59.7 124.6
152.9
2.8
47.7 152.9
2.8
54.4 152.9
2.8
59.7 152.9
184.1
3.4
47.7 184.1
3.4
54.4 184.1
3.4
59.7 184.1
SUJE418-65
Fluid Cap
PFJ2850
+
Air Cap
PAJ080-65
SUJE420-65
Fluid Cap
PFJ40100
+
Air Cap
PAJ125-65
2.1
60.6 124.6
2.1
2.1
–
–
2.1
–
–
SUJE421-65
Fluid Cap
PFJ60100
+
Air Cap
PAJ125-65
2.8
60.6 152.9
2.8
94.9 152.9
2.8
–
–
2.8
–
–
3.4
60.6 184.1
3.4
94.9 184.1
3.4
108.2 184.1
3.4
–
–
SUJE416-90
Fluid Cap
PFJ1650
+
Air Cap
PAJ075-90
SUJE417-90
Fluid Cap
PFJ2050
+
Air Cap
PAJ075-90
0.7
1.4
2.1
2.8
3.4
0.7
1.4
2.1
2.8
3.4
0.7
1.4
2.1
2.8
3.4
1.4
2.1
2.8
3.4
2.1
2.8
3.4
4.1
4.8
4.9
4.9
4.9
4.9
4.9
7.2
7.2
7.2
7.2
7.2
11.0
11.0
11.0
11.0
11.0
30.3
30.3
30.3
30.3
60.6
60.6
60.6
–
–
0.7
1.4
2.1
2.8
3.4
0.7
1.4
2.1
2.8
3.4
0.7
1.4
2.1
2.8
3.4
1.4
2.1
2.8
3.4
2.1
2.8
3.4
4.1
4.8
7.4
7.4
7.4
7.4
7.4
10.8
10.8
10.8
10.8
10.8
24.3
24.3
24.3
24.3
24.3
–
44.3
44.3
44.3
–
94.9
94.9
–
–
0.7
1.4
2.1
2.8
3.4
0.7
1.4
2.1
2.8
3.4
0.7
1.4
2.1
2.8
3.4
1.4
2.1
2.8
3.4
2.1
2.8
3.4
4.1
4.8
8.4
8.4
8.4
8.4
8.4
12.3
12.3
12.3
12.3
12.3
27.9
27.9
27.9
27.9
27.9
–
–
54.4
54.4
–
–
108.2
–
–
0.7
1.4
2.1
2.8
3.4
0.7
1.4
2.1
2.8
3.4
0.7
1.4
2.1
2.8
3.4
1.4
2.1
2.8
3.4
2.1
2.8
3.4
4.1
4.8
9.2
9.2
9.2
9.2
9.2
13.5
13.5
13.5
13.5
13.5
30.8
30.8
30.8
30.8
30.8
–
–
–
63.2
–
–
–
118.6
118.6
53.8
85.0
113.3
141.6
167.1
53.8
85.0
113.3
141.6
167.1
53.8
85.0
113.3
141.6
167.1
–
–
–
161.4
–
–
–
186.9
212.4
SUJE418-90
Fluid Cap
PFJ2850
+
Air Cap
PAJ075-90
SUJE420-90
Fluid Cap
PFJ40100
+
Air Cap
PAJ115-90
SUJE421-90
Fluid Cap
PFJ60100
+
Air Cap
PAJ115-90
53.8
85.0
113.3
141.6
167.1
53.8
85.0
113.3
141.6
167.1
53.8
85.0
113.3
141.6
167.1
82.1
110.4
135.9
161.4
110.4
135.9
161.4
–
–
–
–
53.8
85.0
113.3
141.6
167.1
53.8
85.0
113.3
141.6
167.1
53.8
85.0
113.3
141.6
167.1
–
110.4
135.9
161.4
–
135.9
161.4
–
–
53.8
85.0
113.3
141.6
167.1
53.8
85.0
113.3
141.6
167.1
53.8
85.0
113.3
141.6
167.1
–
–
135.9
161.4
–
–
161.4
–
–
Spray
Angle
65°
90°
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F32
Pressure Spray Set-ups, Internal Mix,
Air Efficient, 1/8JJ Compact Series
Air Caps
Elliptical
spray pattern
Internal mix air caps produce
an elliptical spray pattern.
A
D
Performance Data
Elliptical Spray/Air Efficient (Internal Mix)
SUJ400
SUJ401
Fluid Cap
PFJ16225
+
Air Cap
PAJ14739
Fluid Cap
PFJ20232
+
Air Cap
PAJ132-50
Liquid Capacity (liters per hour)* and Air Capacity (liters per minute)*
Spray
Dimensions
Liquid Pressure
1
1.5
2
2.5
3
4
Spray
D
Air
Air
Air
Air
Air
Air
Air
Air
Air
Air
Air
Air Air* Liquid* Angle (cm)
l/h
l/h
l/h
l/h
l/h
l/h
A
(°)
Press.
l/min Press.
l/min Press.
l/min Press.
l/min Press.
l/min Press.
l/min
–
–
–
–
–
–
–
–
–
4.1
.64
30.6
4.1
3.0
28.6
4.1
6.3
26.1
–
–
–
–
–
–
3.5
.57
26.3
3.5
2.6
24.8
3.5
4.2
23.2
3.5
7.4
21
–
–
–
–
–
–
2.8
2.7
20.4
2.8
4.2
20.1
2.8
5.7
18.1
2.8
8.7
15.2
–
–
–
2.4
.95
18.7
2.4
4.0
16.4
2.4
5.4
15.6
2.4
6.8
14.7
2.4
9.3
13.2
0.7
0.7
35
61
–
–
–
2.1
2.6
15.3
2.1
5.0
13.6
2.1
6.3
13.5
2.1
7.6
12.5
2.1
9.7
11.9
1.4
1.4
30
76
1.7
1.1
14.2
1.7
3.7
12.8
1.7
5.7
11.8
1.7
6.9
11.1
1.7
8.4
10.2
1.7
10.5
9.1
1.4
2.6
11.3
1.4
4.6
10.7
1.4
6.4
9.6
1.4
7.5
9.1
1.4
9.5
7.9
–
–
–
1.0
3.7
9.2
1.0
5.6
8.3
1.0
7.2
7.4
1.0
8.3
6.3
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
4.1
2.3
47.4
4.1
8.2
41.4
–
–
–
–
–
–
–
–
–
3.5
2.4
39.7
3.5
6.4
36.9
3.5
10.2 32.9
–
–
–
–
–
–
2.8
2.6
32.9
2.8
5.7
30
2.8
8.9
28.2
2.8
12.5 24.9
–
–
–
2.1
3.3
25.5
2.1
6.1
22.7
2.1
8.7
21
2.1
11.2 19.0
2.1
14.7 17.0
0.7
0.7
35
66
–
–
–
1.7
4.5
20.4
1.7
8.2
17.0
1.7
10.2 16.4
1.7
12.4 15.2
1.7
15.5 13.4
1.4
1.4
30
81
–
–
–
1.4
6.8
15.9
1.4
9.5
14.2
1.4
11.4 13.0
1.4
13.3 11.8
1.4
16.3
9.9
–
–
–
1.0
8.3
11.3
1.0
10.8 10.2
1.0
12.5
9.6
1.0
14.4
8.5
1.0
17.0
7.6
.70
4.3
10.2
.70
9.5
7.9
.70
12.0
.70
13.6
6.8
.70
15.3
5.7
.70
17.8
4.9
6.8
Tabulation is based on spraying air and water at room temperature under laboratory conditions.
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F33
Air Atomizing
Nozzles
Spray
Set-up
Spray
Consists of
Set-up
Fluid and
No.
Air Cap
Combination
*At the stated pressure in bar.
Air Atomizing Nozzles
Siphon/Gravity-Fed Spray Set-ups,
External Mix, 1/8JJ Compact Series
Features and Benefits
Air Caps
• For round spray pattern, angle “A” is maintained throughout distance “B”. Beyond “B”,
the spray becomes turbulent and will project out to distance “D”.
• When using a siphon or gravity-fed liquid system, the liquid is supplied by either a liquid
siphon or a gravity-feed.
Round spray air caps produce
a full cone round spray pattern.
• Designed to draw liquid through the feed line into the air flow where it is atomized.
Round spray
pattern
A
B
D
12582 retainer ring and 7717-2/007 O-ring must be ordered separately from the spray set-up,
but are included in the standard nozzle assembly. Please contact your sales engineer.
Performance Data
Round Spray
Spray
Set-up
No.
Spray
Set-up
Consists of
Fluid and
Air Cap
Combination
SUJ1A
Fluid Cap J1650
+
Air Cap J64
SUJ1
Fluid Cap J2050
+
Air Cap J64
SUJ2A
Fluid Cap J2050
+
Air Cap J70
SUJ2
Fluid Cap J2850
+
Air Cap J70
SUJ3
Fluid Cap J2850
+
Air Cap J64-5
SUJ4B
Fluid Cap
J40100
+
Air Cap J120
SUJ4
Fluid Cap
J60100
+
Air Cap J120
*At the stated pressure in bar.
Atomizing
Air
Liquid Capacity
(liters per hour)*
Gravity Head (cm)
Spray Dimensions
at 20 cm Siphon Height
Air
Press.
Air
Capacity
l/min
Siphon Height (cm)
45
30
15
10
20
30
60
90
.70
1.5
3.0
4.0
.70
1.5
3.0
4.0
.70
1.5
3.0
4.0
.70
1.5
3.0
4.0
.70
1.5
3.0
4.0
.70
1.5
3.0
4.0
1.5
3.0
4.0
5.6
11.3
17.0
28
36
13.3
20
32
41
23
36
58
74
19.3
31
50
65
11.6
18.4
29
37
37
59
91
116
57
88
111
147
1.5
1.8
2.1
2.2
2.4
2.8
3.4
3.7
2.5
2.9
3.4
3.7
4.5
5.3
5.7
6.0
–
–
6.4
7.1
–
–
12.1
12.9
22
25
26
26
1.3
1.7
1.9
2.0
2.1
2.6
3.1
3.4
2.3
2.8
3.3
3.6
4.0
4.9
5.4
5.6
–
4.8
6.0
6.7
–
9.9
11.3
12.1
19.9
23
24
24
1.1
1.5
1.7
1.8
1.7
2.4
2.9
3.3
2.0
2.5
3.2
3.5
3.4
4.4
5.0
5.0
–
4.1
5.6
6.3
–
9.2
10.7
11.4
16.3
19.5
21
22
.87
1.3
1.5
1.6
1.5
2.1
2.8
3.1
1.6
2.2
2.9
3.4
2.1
3.5
4.2
4.4
2.2
3.6
5.2
6.1
5.3
7.4
8.8
9.5
12.3
16.7
18.4
19.7
.68
1.2
1.4
1.5
1.2
1.9
2.6
2.9
1.4
2.0
2.8
3.3
1.8
2.9
3.9
4.0
1.9
3.2
4.8
5.6
3.7
6.0
7.7
8.6
10.5
14.2
15.7
17.0
.53
1.1
1.3
1.4
.79
1.6
2.4
2.7
1.1
1.7
2.5
3.0
1.4
2.7
3.4
3.5
1.1
2.6
4.4
5.3
2.2
4.8
6.5
7.6
8.3
11.5
12.9
14.6
–
.62
1.1
1.2
–
.91
1.7
2.1
–
.89
1.9
2.5
–
1.8
2.4
2.8
–
1.2
2.8
3.7
–
1.5
3.0
4.2
2.8
6.4
7.9
9.8
–
–
.76
.87
–
–
1.1
1.5
–
–
1.2
2.0
–
–
1.2
1.9
–
–
1.2
2.0
–
–
1.1
1.8
–
2.8
4.5
6.1
Air*
Spray
Angle
A (°)
B
(cm)
D
(m)
.70
1.5
3.0
4.0
18
18
18
18
28
28
30
36
1.8
1.9
2.3
2.6
.70
1.5
3.0
4.0
18
18
18
19
30
33
38
43
2.1
2.3
2.6
3.0
.70
1.5
3.0
4.0
18
18
19
20
30
33
38
43
2.4
2.7
3.4
4.0
.70
1.5
3.0
4.0
21
21
21
22
38
41
46
51
3.0
3.4
4.0
4.6
.70
1.5
3.0
4.0
18
18
18
19
30
33
38
43
2.4
2.7
3.4
4.0
.70
1.5
3.0
4.0
17
17
18
19
46
48
53
58
3.0
3.4
4.0
4.6
1.5
3.0
4.0
5.6
17
18
18
19
46
51
53
58
3.7
4.3
4.9
5.5
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F34
Siphon/Gravity-Fed Spray Set-ups,
External Mix, 1/8JJ Compact Series
Features and Benefits
Air Caps
• For flat spray pattern, dimensions “A”, “B” and “C” are the pattern widths at distances from the nozzle.
• Total distance of spray projection from the nozzle to the maximum dispersal point is represented by “D”.
C
Flat spray air caps produce
a flat spray pattern.
B
A
Flat spray
pattern
6"
(15 cm)
9" (23 cm)
15" (38 cm)
D
Performance Data
Flat Spray
SUJF1
Fluid Cap J2850
+
Air Cap J73420
Fluid Cap J35100
SUJF2C
+
Air Cap J120432
Fluid Cap J40100
SUJF3B
+
Air Cap J122435
Fluid Cap J40100
SUJF4B
+
Air Cap J122440
*At the stated pressure in bar.
Atomizing
Air
Liquid Capacity
(liters per hour)*
Gravity Head (cm)
Spray Dimensions
at 20 cm Siphon Height
Air
Press.
Air
Capacity
l/min
Siphon Height (cm)
45
30
15
10
20
30
60
90
.70
28
1.3
1.2
1.1
1.0
.95
.83
.64
1.5
43
1.2
1.1
1.0
.90
.86
.78
.66
2.0
50
.82
.76
.68
.57
.50
–
1.5
56
3.7
3.5
3.3
2.9
2.8
2.0
65
3.4
3.3
3.1
2.8
3.0
87
2.8
2.7
2.5
4.0
110
1.9
1.8
1.6
1.5
68
5.1
4.8
2.0
78
4.9
3.0
103
3.5
Air*
A
(cm)
B
(cm)
C
(cm)
D
(m)
.49
.70
20
26
38
2.1
.54
1.5
21
29
38
2.1
–
–
2.0
23
30
38
1.8
2.5
2.3
2.1
2.7
2.6
2.4
2.2
2.4
2.2
2.1
1.9
1.7
1.5
1.3
1.2
–
–
1.5
2.0
3.0
4.0
23
24
27
28
32
34
37
39
38
42
46
48
2.7
2.7
3.0
2.7
4.5
3.8
3.7
3.5
3.0
2.4
4.7
4.4
3.6
3.4
3.2
2.9
2.3
1.5
19
23
27
3.4
3.4
3.2
3.0
2.2
2.0
1.7
–
–
2.0
20
25
28
3.4
117
2.2
2.0
1.7
–
–
–
–
–
3.0
22
27
30
3.0
1.5
63
7.6
7.2
6.6
5.7
5.4
5.1
4.6
3.7
2.0
73
7.6
7.3
6.8
5.9
5.7
5.5
5.0
4.2
1.5
17
22
27
3.4
3.0
96
6.4
6.1
5.7
5.0
4.5
4.1
3.3
–
2.0
18
23
29
3.4
3.5
110
4.2
3.7
3.2
2.6
–
–
–
–
3.0
20
27
33
3.4
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F35
Air Atomizing
Nozzles
Spray
Set-up
No.
Spray
Set-up
Consists of
Fluid and
Air Cap
Combination
Air Atomizing Nozzles
Overview/Nozzle Bodies/Nozzle Assemblies,
VAU and VMAU Series
Variable Spray Series
air atomizing nozzles
1/8VAA
Plug 29155-001-SS
Spray set-up
1/8VAAN
Shut-off needle assembly
29535-001-SS
1/8VAACO
1
1/8VAANCO
2
3
4
5
1. Cap ring 28207-101-SS
2. Air cap
3. Fluid cap
4. Nozzle body 29074-001-SS
5. Washer 29154-001-BUC
Clean-out needle assembly
29156
Shut-off/clean-out needle assembly
29534
1/8VAU
Features and Benefits
• The VAA, VAU and VMAU variable spray nozzles provide uniform
spray distribution, even when spraying viscous liquids.
• VAACO features a clean-out needle that clears the liquid orifice of
obstructions when activated manually.
• Independent control of liquid, atomizing air, and fan air pressures
is possible for fine-tuning of flow rate, drop size, spray distribution
and coverage.
• VAANCO combines the features of the VAAN and VAACO, offering
a combination shut-off/clean-out needle.
• Can be set and re-set in seconds, simplifying application changes.
• VAU offers automatic operation with a built-in shut-off/clean-out
needle.
• Independent air atomizing line can be adjusted to vary spray drop
size without affecting liquid flow rates.
• VAUPM has the same operating features as the VAU, but offers
the convenience of a mounting plate.
• Additional inlet/outlet port allows for liquid recirculation that
effectively maintains the flow of viscous liquids.
• VMAU allows for individual adjustment of the atomizing air, fan air
and liquid flows and offers modular components to accommodate
a wide range of spray applications.
• VAA offers continuous operation and consists of a body, spray
set-up and plug.
• Mounting Kit 28945-001-316SS uses clamps to mount VAA nozzles.
• VAAN features a manual shut-off needle that enables the flow of
the liquid to be stopped.
• Mounting Kit 28945-002-SS uses rods to mount VAA nozzles.
Optimization Tips
See Also
http://
• Accessories
– Air line filters
• See page F2 for optimization tips.
– Air pressure regulators
– Liquid pressure regulators
– Pressure gauges
– Solenoid valves
– Strainers
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F36
Nozzle Bodies/Nozzle Assemblies,
VAU and VMAU Series
VAA
1/4" NPT or BSPT with
shut-off/clean-out needle
VAANCO
1/8" NPT or BSPT
1/8" NPT or BSPT with
shut-off needle
1/8" NPT or BSPT with
clean-out needle
VAU
Clamp mounting kits
Rod mounting kits
1/8" NPT or BSPT
Materials
Material
Code
Material
1/8" NPT or BSPT
VAACO
Mounting Kits
1/8" NPT or BSPT with
shut-off/clean-out needle
VAUPM
VAAN
Air Atomizing
Nozzles
VMAU
Nozzles
303 Stainless Steel
303 Stainless Steel/Aluminum
316 Stainless Steel
Air/Fluid Caps
303 Stainless Steel
Nozzle Type
VMAU
VAA
VAAN
VAACO
VAANCO
VAU
l
l
l
l
l
l
SS
SSA
VAUPM
l
l
SS
l
l
l
l
l
l
Other materials available upon request.
Ordering Info
Complete Nozzle Assembly
Nozzle Body*
Spray Set-up Only
Spray Set-up
1/8 VAA – SS
l
l
l
Inlet
Conn.
Nozzle
Body
Assembly
Type
Material
Code
Spray Set-up
+ SUV128 – SS
l
l
Spray
Set-up
No.
Material
Code
*Includes retainer and gasket.
BSPT connections require the addition of a “B” prior to the
nozzle body inlet connection.
To order fluid cap only, use fluid cap number (shown in
performance data charts) and material code: VF1650-SS.
To order air cap only, use air cap number (shown in
performance data charts) and material code: VA67255-60-SS.
To order spray nozzle without set-up, use inlet connection,
nozzle body, and material code: 1/8VAA-SS.
Order mounting kits separately: 28945-001-316SS.
SUV128
l
Spray
Set-up
No.
–
SS
l
Material
Code
To order spray set-up only,
use spray set-up number and
material code: SUV128-SS.
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F37
Air Atomizing Nozzles
Pressure Spray Set-ups, External Mix,
VMAU Series
Performance Data
VMAU
Spray
Set-up
No.
Spray
Set-up
Consists of
Fluid and
Air Cap
Combination
*At the stated pressure in bar.
Liquid
Capacity*
Air Capacity*
Capacity
Press. Atomizing
Air
l/min
Fan
Air
l/min
Spray Coverage (cm) at Indicated Distance from Nozzle
Fan Air Pressure
Atom.
Water
Air
Cap. Press. Press.
Press.
l/h
0.7
0.7
12.5
61
1
15
76
1.5
Fluid Cap
VMF1650
SUVM67B
+
Air Cap
VMA67255-60
17.5
93
2
23
125
3
29
156
3.5
36
187
4
42
215
5
48
244
5.5
55
272
6
61
301
0.2
0.3
0.7
2.8
3.8
5.3
1
6.4
1.5
7.2
1.5
2
3
4
0.7
0.7
Fluid Cap
VMF2050
SUVM67A
+
Air Cap
VMA67255-60
12.5
61
1
15
76
1.5
17.5
93
2
23
125
3
29
156
3.5
36
187
4
42
215
5
48
244
5.5
55
272
6
61
301
0.2
0.3
0.7
1
1.5
4
5.5
8
9.5
1.5
2
3
11
4
0
A
B
0.3
B
C
A
B
C
A
B
2
C
A
B
3
B
C
0.2
5.1 7.6 10.2 12.7 15.2 20.3 17.8 22.9 25.4 17.8 22.9 27.9 8.9 10.2 15.2 –
–
–
0.7
6.4 8.9 11.4 15.2 20.3 24.1 17.8 22.9 27.9 20.3 25.4 30.5 8.9 10.2 14.0 –
–
–
1.5
–
–
–
0.2
5.1 7.6 11.4 10.2 12.7 15.2 15.2 17.8 20.3 17.8 22.9 27.9 12.7 16.5 17.8 17.8 20.3 25.4
0.7
5.1 7.6 10.2 10.2 17.8 22.9 17.8 22.9 25.4 20.3 25.4 30.5 11.4 12.7 15.2 17.8 20.3 25.4
1.5
5.1 7.6 10.2 10.2 17.8 22.9 20.3 25.4 30.5 22.9 30.5 35.6 15.2 19.1 22.9 17.8 20.3 25.4
0.2
5.1 7.6 11.4 7.6 10.2 12.7 12.7 15.2 17.8 15.2 20.3 25.4 14.0 15.2 17.8 17.8 22.9 27.9
0.7
5.1 7.6 11.4 10.2 11.4 15.2 15.2 19.1 25.4 17.8 22.9 27.9 14.0 16.5 20.3 17.8 22.9 30.5
1.5
5.1 7.6 10.2 11.4 15.2 20.3 17.8 22.9 30.5 20.3 25.4 30.5 15.2 17.8 22.9 20.3 22.9 27.9
0.2
6.4 8.9 15.2 8.9 11.4 17.8 12.7 15.2 20.3 15.2 20.3 25.4 12.7 16.5 20.3 17.8 22.9 27.9
0.7
5.1 7.6 12.7 10.2 12.7 19.1 12.7 17.8 22.9 17.8 22.9 27.9 15.2 19.1 22.9 17.8 22.9 27.9
1.5
5.1 7.6 11.4 10.2 14.0 20.3 15.2 20.3 25.4 20.3 22.9 27.9 15.2 19.1 25.4 20.3 25.4 30.5
0.2
6.4 8.9 15.2 7.6 11.4 15.2 10.2 12.7 15.2 12.7 17.8 22.9 12.7 16.5 25.4 17.8 22.9 27.9
0.7
6.4 7.6 12.7 8.9 10.2 16.5 11.4 12.7 17.8 17.8 22.9 27.9 15.2 19.1 27.9 20.3 25.4 30.5
1.5
5.1 7.6 11.4 8.9 12.7 17.8 12.7 17.8 22.9 17.8 22.9 27.9 15.2 19.1 29.2 20.3 25.4 30.5
0.2
5.1 7.6 10.2 12.7 15.2 20.3 17.8 22.9 25.4 17.8 22.9 27.9 8.9 10.2 11.4 –
–
–
0.7
6.4 8.9 11.4 15.2 20.3 24.1 17.8 22.9 27.9 20.3 25.4 30.5 11.4 12.7 15.2 –
–
–
1.5
–
–
–
0.2
5.1 7.6 11.4 10.2 12.7 15.2 15.2 17.8 20.3 17.8 22.9 27.9 12.7 17.8 21.6 17.8 20.3 25.4
0.7
5.1 7.6 10.2 12.7 17.8 22.9 17.8 22.9 25.4 20.3 25.4 30.5 15.2 17.8 20.3 17.8 20.3 25.4
1.5
5.1 7.6 10.2 15.2 17.8 22.9 20.3 25.4 30.5 22.9 30.5 35.6 17.8 20.3 25.4 17.8 20.3 25.4
0.2
5.1 7.6 11.4 7.6 10.2 12.7 12.7 15.2 17.8 15.2 20.3 25.4 14.0 16.5 17.8 17.8 22.9 27.9
0.7
5.1 7.6 11.4 10.2 11.4 15.2 15.2 19.1 25.4 17.8 22.9 27.9 17.8 22.9 25.4 17.8 22.9 30.5
1.5
5.1 7.6 10.2 11.4 15.2 20.3 17.8 22.9 30.5 20.3 25.4 30.5 20.3 25.4 30.5 20.3 22.9 27.9
0.2
6.4 8.9 15.2 8.9 11.4 17.8 12.7 15.2 20.3 15.2 20.3 25.4 15.2 20.3 22.9 17.8 22.9 27.9
0.7
5.1 7.6 12.7 10.2 12.7 19.1 12.7 17.8 22.9 17.8 22.9 27.9 15.2 20.3 24.1 17.8 22.9 27.9
1.5
5.1 7.6 11.4 10.2 14.0 20.3 15.2 20.3 25.4 20.3 22.9 27.9 15.2 21.6 26.7 20.3 25.4 30.5
0.2
6.4 8.9 15.2 7.6 11.4 15.2 10.2 12.7 15.2 12.7 17.8 22.9 16.5 19.1 22.9 17.8 22.9 27.9
0.7
6.4 7.6 12.7 8.9 10.2 16.5 11.4 12.7 17.8 17.8 22.9 27.9 16.5 22.9 27.9 20.3 25.4 30.5
1.5
5.1 7.6 11.4 8.9 12.7 17.8 12.7 17.8 22.9 17.8 22.9 27.9 16.5 22.9 30.5 20.3 25.4 30.5
–
A
1.5
A
–
C
0.7
C
– 15.2 22.9 27.9 20.3 30.5 33 25.4 30.5 35.6 8.9 14.0 17.8 –
– 15.2 22.9 27.9 20.3 30.5 33 25.4 30.5 35.6 17.8 21.6 24.1 –
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F38
Pressure Spray Set-ups, External Mix,
VMAU Series
Performance Data
VMAU
Spray
Set-up
Consists of
Fluid and
Air Cap
Combination
Liquid
Capacity*
Air Capacity*
Capacity
Press. Atomizing Fan
Air
Air
l/min
l/min
Spray Coverage (cm) at Indicated Distance from Nozzle
Fan Air Pressure
Atom.
Water
Air
Cap. Press. Press.
Press.
l/h
0.7
SUVM67
Fluid Cap
VMF2850
+
Air Cap
VMA67255-60
0.7
1
1.5
2
3
3.5
4
5
5.5
6
12.5
15
17.5
23
29
36
42
48
55
61
61
76
93
125
156
187
215
244
272
301
0.2
8
0.3
10.5
0.7
15
1
18
1.5
21
1.5
2
3
4
0.7
Fluid Cap
VMF3578
SUVM113A
+
Air Cap
VMA113289-60
0.7
1
1.5
2
3
3.5
4
5
5.5
6
44
55
67
90
113
134
156
179
198
219
100
126
151
203
253
300
348
396
439
487
0.2
13.5
0.3
17.5
0.7
25
1
30
1.5
35
1.5
2
3
4
0.7
SUVM113
Fluid Cap
VMF4078
+
Air Cap
VMA113289-60
0.7
1
1.5
2
3
3.5
4
5
5.5
6
44
55
67
90
113
134
156
179
198
219
100
126
151
203
253
300
348
396
439
487
0.2
18
0.3
24
0.7
34
1
42
1.5
48
1.5
2
3
4
0.2
0.7
1.5
0.2
0.7
1.5
0.2
0.7
1.5
0.2
0.7
1.5
0.2
0.7
1.5
0.2
0.4
0.7
0.2
0.4
0.7
0.2
0.4
0.7
0.2
0.4
0.7
0.2
0.4
0.7
0.2
0.4
0.7
0.2
0.4
0.7
0.2
0.4
0.7
0.2
0.4
0.7
0.2
0.4
0.7
0
0.3
0.7
1.5
2
3
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
5.1
–
–
6.4
–
–
6.4
–
–
6.4
5.1
–
6.4
6.4
5.1
–
–
–
3.8
–
–
5.1
–
–
5.1
6.4
5.1
5.1
6.4
6.4
5.1
–
–
5.1
5.1
–
5.1
3.8
–
3.8
3.8
5.1
5.1
5.1
5.1
7.6
–
–
7.6
–
–
7.6
–
–
8.9
7.6
–
8.9
8.9
7.6
–
–
–
5.1
–
–
6.4
–
–
6.4
8.9
7.6
6.4
7.6
7.6
6.4
–
–
7.6
10.2
–
6.4
6.4
–
6.4
6.4
7.6
7.6
7.6
7.6
12.7
–
–
11.4
–
–
11.4
–
–
12.7
11.4
–
14.0
14.0
11.4
–
–
–
7.6
–
–
8.9
–
–
10.2
14.0
10.2
7.6
11.4
12.7
10.2
–
–
12.7
12.7
–
10.2
7.6
–
11.4
10.2
20.3
10.2
10.2
10.2
17.8
21.6
–
15.2
15.2
17.8
12.7
12.7
–
10.2
11.4
11.4
10.2
11.4
10.2
20.3
25.4
30.5
12.7
17.8
17.8
10.2
12.7
11.4
10.2
10.2
11.4
5.1
10.2
10.2
17.8
20.3
22.9
16.5
17.8
16.5
12.7
12.7
14.0
10.2
11.4
11.4
8.9
12.7
8.9
22.9
27.9
–
17.8
20.3
22.9
15.2
17.8
–
12.7
14.0
15.2
11.4
12.7
14.0
26.7
30.5
35.6
17.8
22.9
22.9
12.7
17.8
15.2
12.7
12.7
15.2
10.2
11.4
11.4
19.1
29.2
33
22.9
22.9
26.7
17.8
19.1
20.3
15.2
15.2
16.5
12.7
19.1
12.7
35.6
38.1
–
22.9
27.9
30.5
20.3
25.4
–
19.1
20.3
22.9
17.8
19.1
20.3
35.6
40.6
41.9
25.4
30.5
30.5
17.8
25.4
20.3
15.2
19.1
21.6
12.7
15.2
19.1
43.2
43.2
45.7
27.9
30.5
35.6
27.9
25.4
27.9
20.3
20.3
19.1
17.8
15.2
20.3
22.9
30.5
25.4
19.1
22.9
25.4
15.2
20.3
20.3
12.7
17.8
17.8
12.7
15.2
15.2
25.4
30.5
30.5
20.3
22.9
26.7
15.2
16.5
16.5
14.0
15.2
16.5
12.7
14.0
14.0
27.9
30.5
30.5
22.9
24.1
27.9
17.8
20.3
20.3
16.5
17.8
17.8
15.2
20.3
15.2
30.5
38.1
30.5
22.9
27.9
30.5
20.3
27.9
27.9
17.8
20.3
22.9
15.2
17.8
20.3
33
35.6
16.5
27.9
30.5
34.3
20.3
25.4
25.4
19.1
20.3
22.9
16.5
17.8
19.1
38.1
43.2
43.2
33
30.5
35.6
27.9
25.4
26.7
21.6
22.9
25.4
19.1
26.7
20.3
30.5
53.3
40.6
27.9
38.1
43.2
22.9
38.1
35.6
25.4
27.9
34.3
20.3
24.1
25.4
43.2
45.7
55.9
35.6
38.1
41.9
27.9
33
33
27.9
25.4
30.5
20.3
24.1
24.1
45.7
55.9
58.4
45.7
43.2
47
34.3
36.8
35.6
30.5
31.9
36.8
25.4
30.5
33
22.9
38.1
35.6
20.3
30.5
33
20.3
27.9
27.9
20.3
22.9
25.4
17.8
20.3
20.3
20.3
–
–
21.6
–
–
20.3
22.9
25.4
20.3
22.9
25.4
20.3
20.3
21.6
25.4
–
–
25.4
35.6
40.6
22.9
27.9
29.2
22.9
25.4
25.4
20.3
22.9
21.6
25.4
45.7
45.7
25.4
38.1
43.2
25.4
35.6
35.6
22.9
30.5
30.5
22.9
27.9
27.9
25.4
–
–
30.5
–
–
27.9
30.5
35.6
26.7
29.2
35.6
25.4
25.4
27.9
34.3
–
–
33
38.1
48.3
30.5
34.3
38.1
30.5
33
35.6
27.9
31.8
29.2
30.5
48.3
58.4
33
48.3
50.8
33
48.3
48.3
27.9
40.6
40.6
27.9
33
35.6
33
–
–
35.6
–
–
35.6
39.4
40.6
35.6
40.6
47
30.5
33
25.4
38.1
–
–
41.9
47
50.8
43.2
40.6
52.1
40.6
43.2
48.3
35.6
39.4
41.9
–
–
38.1
14.0
27.9
35.6
12.7
22.9
30.5
14.0
22.9
25.4
14.0
16.5
22.9
–
–
–
17.8
–
–
20.3
22.9
–
20.3
20.3
25.4
19.1
25.4
25.4
–
–
–
–
–
–
20.3
25.4
30.5
21.6
26.7
27.9
22.9
22.9
24.1
–
–
48.3
16.5
30.5
43.2
14.0
27.9
40.6
16.5
25.4
31.8
16.5
22.9
27.9
–
–
–
21.6
–
–
26.7
27.9
–
25.4
27.9
34.3
24.1
30.5
31.8
–
–
–
–
–
–
27.9
30.5
38.1
29.2
30.5
33
27.9
31.8
33
–
–
58.4
20.3
35.6
50.8
16.5
30.5
48.3
20.3
29.2
40.6
19.1
27.9
38.1
–
–
–
27.9
–
–
33
30.5
–
33
35.6
45.7
35.6
38.1
45.7
–
–
–
–
–
–
33
39.4
45.7
38.1
40.6
43.2
38.1
45.7
40.6
–
–
–
20.3
27.9
43.2
17.8
22.9
40.6
17.8
27.9
33
17.8
20.3
25.4
–
–
–
14.0
–
–
19.1
–
–
19.1
20.3
21.6
19.1
22.9
22.9
–
–
–
–
–
–
–
19.1
24.1
21.6
21.6
25.4
22.9
24.1
24.1
–
–
–
22.9
30.5
50.8
20.3
25.4
50.8
22.9
33
45.7
22.9
25.4
35.6
–
–
–
17.8
–
–
22.9
–
–
21.6
21.6
26.7
24.1
30.5
30.5
–
–
–
–
–
–
–
25.4
30.5
27.9
27.9
30.5
26.7
29.2
31.8
–
–
–
30.5
30.5
58.4
25.4
30.5
55.9
27.9
38.1
53.3
27.9
30.5
40.6
–
–
–
22.9
–
–
27.9
–
–
30.5
30.5
36.8
30.5
38.1
38.1
–
–
–
–
–
–
–
35.6
43.2
36.8
38.1
48.3
35.6
41.9
41.9
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F39
Air Atomizing
Nozzles
Spray
Set-up
No.
*At the stated pressure in bar.
Air Atomizing Nozzles
Pressure Spray Set-ups, External Mix,
VMAU Series
Performance Data
VMAU
Spray
Set-up
No.
Spray
Set-up
Consists of
Fluid and
Air Cap
Combination
*At the stated pressure in bar.
Liquid
Capacity*
Air Capacity*
Spray Coverage (cm) at Indicated Distance from Nozzle
Fan Air Pressure
Atom.
Water
Air
Press.
Cap.
Press.
Press. Atomizing Fan Press.
l/h
Air
Air
l/min
l/min
Capacity
0.7
Fluid Cap
VMF60100
SUVM128
+
Air Cap
VMA1282100-60
0.7
1
1.5
2
3
3.5
4
5
5.5
6
46
56
67
88
110
132
153
176
198
221
110
139
168
229
289
348
405
462
515
566
0.2
38
0.3
49
0.7
70
1
86
1.5
99
1.5
2
3
4
0.7
Fluid Cap
VMF80125
SUVM152
+
Air Cap
VMA1522110-60
0.7
1
1.5
2
3
3.5
4
5
5.5
6
50
62
75
101
125
150
174
198
221
244
109
136
165
221
277
331
385
436
487
532
0.2
69
0.3
89
0.7
126
1
155
1.5
179
1.5
2
3
4
0.1
0.2
0.4
0.1
0.2
0.4
0.1
0.2
0.4
0.1
0.2
0.4
0.1
0.2
0.4
0.1
0.2
0.4
0.1
0.2
0.4
0.1
0.2
0.4
0.1
0.2
0.4
0.1
0.2
0.4
0
0.3
0.7
1
1.5
2
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
A
B
C
–
–
–
–
–
–
3.8
5.1
2.5
5.1
6.4
5.1
7.6
7.6
6.4
–
–
–
–
–
–
6.4
–
–
5.1
–
–
3.8
5.1
–
–
–
–
–
–
–
7.6
7.6
7.6
7.6
7.6
7.6
10.2
10.2
8.9
–
–
–
–
–
–
7.6
–
–
7.6
–
–
5.1
7.6
–
–
–
–
–
–
–
11.4
12.7
12.7
14.0
14.0
10.2
15.2
15.2
10.2
–
–
–
–
–
–
10.2
–
–
7.6
–
–
7.6
12.7
–
25.4
24.1
25.4
15.2
17.8
19.1
12.7
14.0
11.4
12.7
12.7
12.7
11.4
11.4
10.2
26.7
–
–
15.2
17.8
–
15.2
12.7
–
10.2
12.7
–
7.6
12.7
–
34.3
31.8
33
21.6
25.4
26.7
17.8
20.3
15.2
15.2
17.8
17.8
15.2
16.5
14.0
33
–
–
20.3
24.1
–
20.3
17.8
–
12.7
19.1
–
12.7
12.7
–
53.3
48.3
50.8
33
36.8
36.8
24.1
34.3
24.1
22.9
25.4
25.4
22.9
24.1
19.1
53.3
–
–
33
38.1
–
30.5
26.7
–
15.2
25.4
25.4
16.5
19.1
–
33
35.6
35.6
20.3
22.9
25.4
17.8
20.3
20.3
15.2
16.5
15.2
14.0
15.2
12.7
33
33
35.6
24.1
25.4
25.4
19.1
20.3
21.6
15.2
17.8
17.8
16.5
15.2
15.2
40.6
45.7
48.3
27.9
31.8
35.6
25.4
27.9
27.9
22.9
24.1
25.4
20.3
21.6
17.8
43.2
44.5
48.3
33
35.6
34.3
27.9
30.5
27.9
20.3
25.4
25.4
19.1
21.6
17.8
55.9
61
66
44.5
45.7
49.5
35.6
38.1
40.6
33
35.6
38.1
30.5
30.5
27.9
66
66
67.3
47
50.8
53.3
43.2
48.3
40.6
30.5
38.1
35.6
26.7
30.5
30.5
30.5
31.8
40.6
24.1
25.4
30.5
22.9
24.1
24.1
20.3
20.3
22.9
16.5
17.8
16.5
33
30.5
41.9
25.4
27.9
30.5
25.4
26.7
27.9
20.3
21.6
21.6
20.3
17.8
17.8
40.6
43.2
55.9
33
35.6
44.5
27.9
33
33
27.9
30.5
33
25.4
25.4
22.9
48.3
53.3
53.3
38.1
39.4
44.5
34.3
34.3
35.6
30.5
31.8
30.5
25.4
25.4
25.4
53.3
61
76.2
44.5
50.8
61
35.6
48.3
48.3
39.4
45.7
45.7
35.6
35.6
34.3
68.6
73.7
71.1
55.9
52.1
66
49.5
50.8
50.8
41.9
45.7
43.2
35.6
36.8
35.6
–
30.5
45.7
20.3
24.1
27.9
25.4
25.4
25.4
21.6
25.4
25.4
21.6
22.9
20.3
33
33
40.6
20.3
24.1
27.9
25.4
25.4
25.4
21.6
25.4
25.4
21.6
22.9
20.3
–
40.6
62.2
30.5
33
44.5
35.6
35.6
36.8
29.2
33
35.6
22.9
27.9
27.9
45.7
49.5
61
30.5
33
44.5
35.6
35.6
36.8
29.2
33
35.6
22.9
27.9
27.9
–
50.8
86.4
35.6
47
66
43.2
48.3
54.6
36.8
48.3
50.8
36.8
40.6
43.2
61
76.2
86.4
35.6
47
66
43.2
48.3
54.6
36.8
48.3
50.8
36.9
40.6
43.2
–
–
48.3
20.3
25.4
30.5
24.1
25.4
30.5
22.9
25.4
27.9
21.6
22.9
22.9
25.4
38.1
–
22.9
31.8
38.1
22.9
30.5
30.5
22.9
25.4
27.9
20.3
25.4
25.4
–
–
61
26.7
33
45.7
30.5
33
40.6
33
34.3
36.8
30.5
30.5
30.5
38.1
58.4
–
35.6
33
53.3
35.6
41.9
40.6
33
38.1
40.6
30.5
33
35.6
–
–
83.8
30.5
40.6
68.6
40.6
41.9
55.9
43.2
48.3
55.9
40.6
41.9
45.7
54.6
76.2
–
53.3
63.5
81.3
49.5
57.2
61
45.7
53.3
58.4
45.7
47
48.3
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F40
Pressure Spray Set-ups, External Mix,
VAU Series
Features and Benefits
Air Caps
• The dimensions “A”, “B” and “C” of the flat spray pattern are controlled by the combination of fan
air pressure and atomizing air pressure.
Fan air
Atomized liquid
• The liquid flow rate is constant and not affected by the air pressure.
Fan air
C
External mix with fan air:
flat spray pattern
Without fan air:
round spray pattern.
B
Flat spray
pattern
28207-101-SS cap ring and
29154-001-BUC must be
ordered separately from
the spray set-up, but are
included in the standard nozzle
assembly. Please contact your
sales engineer.
A
6"
(15 cm)
9" (23 cm)
15" (38 cm)
D
Performance Data
VAU
SUV67B
SUV67A
SUV67
Spray
Set-up
Consists of
Fluid and
Air Cap
Combination
Fluid Cap
VF1650
+
Air Cap
VA67255-60
Fluid Cap
VF2050
+
Air Cap
VA67255-60
Fluid Cap
VF2850
+
Air Cap
VA67255-60
Air Capacity*†
Press.
Atomizing
Air
l/min
Spray Coverage (centimeters) at Indicated Distance from Nozzle
Liquid Capacity*†
Fan Air
l/min
Press.
Cap.
l/h
Atom.
Air
Press.
.69
1.0
1.4
2.1
2.8
3.4
4.1
4.8
5.5
6.2
12.5
15.0
17.6
23
29
36
42
48
55
61
61
76
93
125
156
187
215
244
272
301
.21
.21
.34
.34
.69
.69
1.0
1.0
1.4
1.4
2.8
2.8
3.6
3.6
5.1
5.1
6.3
6.3
7.3
7.3
1.5
.69
1.0
1.4
2.1
2.8
3.4
4.1
4.8
5.5
6.2
12.5
15.0
17.6
23
29
36
42
48
55
61
61
76
93
125
156
187
215
244
272
301
.21
.21
.34
.34
.69
.69
1.0
1.0
1.4
1.4
4.2
4.2
5.5
5.5
7.8
7.8
9.5
9.5
11.1
11.1
1.5
.69
1.0
1.4
2.1
2.8
3.4
4.1
4.8
5.5
6.2
12.5
15.0
17.6
23
29
36
42
48
55
61
61
76
93
125
156
187
215
244
272
301
.21
.21
.34
.34
.69
.69
1.0
1.0
1.4
1.4
8.1
8.1
10.5
10.5
15.0
15.0
18.4
18.4
21
21
1.5
Fan Air Pressure
Water
Press.
.20
.70
1.5
.20
.70
1.5
.20
.70
1.5
.20
.70
1.5
.20
.70
1.5
.20
.70
1.5
.20
.70
1.5
.20
.70
1.5
.20
.70
1.5
.20
.70
1.5
.20
.70
1.5
.20
.70
1.5
2
3
6
2
3
6
2
3
6
0††
A
5.1
5.1
5.1
5.1
5.1
5.1
6.4
5.1
5.1
5.1
6.4
5.1
5.1
5.1
5.1
5.1
5.1
5.1
6.4
5.1
5.1
6.4
6.4
5.1
6.4
5.1
5.1
6.4
5.1
5.1
6.4
5.1
5.1
6.4
6.4
6.4
B
7.6
6.4
7.6
7.6
6.4
7.6
8.9
7.6
7.6
7.6
7.6
7.6
7.6
7.6
7.6
7.6
7.6
7.6
8.9
7.6
7.6
8.9
8.9
7.6
7.6
7.6
6.4
7.6
7.6
6.4
8.9
7.6
7.6
8.9
8.9
7.6
0.3
C
11.4
10.2
10.2
11.4
11.4
10.2
15.2
12.7
11.4
12.7
12.7
11.4
11.4
11.4
10.2
11.4
12.7
10.2
14.0
12.7
11.4
12.7
12.7
11.4
11.4
12.7
10.2
11.4
12.7
10.2
12.7
12.7
12.7
12.7
12.7
11.4
A
10.2
12.7
15.2
7.6
10.2
11.4
8.9
10.2
10.2
7.6
7.6
7.6
12.7
12.7
15.2
10.2
10.2
12.7
8.9
10.2
10.2
7.6
8.9
8.9
15.2
15.2
17.8
12.7
12.7
12.7
10.2
11.4
11.4
8.9
10.2
8.9
B
12.7
17.8
20
10.2
11.4
15.2
11.4
12.7
14.0
10.2
10.2
11.4
15.2
17.8
20
12.7
15.2
15.2
12.7
14.0
15.2
11.4
11.4
11.4
17.8
20
23
15.2
17.8
17.8
12.7
14.0
15.2
12.7
14.0
12.7
0.7
C
15.2
25
30
12.7
15.2
20
17.8
19.1
20
14.0
15.2
16.5
19.1
25
30
16.5
20
23
17.8
20
22
15.2
16.5
16.5
23
28
30
20
25
25
19.1
20
23
15.2
17.8
16.5
A
15.2
17.8
20
12.7
15.2
17.8
12.7
15.2
15.2
10.2
10.2
10.2
15.2
20
23
14.0
17.8
17.8
12.7
16.5
16.5
10.2
11.4
11.4
19.1
23
25
15.2
20
20
12.7
17.8
17.8
11.4
12.7
12.7
B
17.8
22
28
15.2
19.1
23
15.2
17.8
20
12.7
12.7
15.2
17.8
25
28
17.8
23
25
16.5
19.1
22
14.0
15.2
16.5
23
28
30
20
28
28
17.8
20
23
15.2
17.8
17.8
1.5
C
20
30
36
17.8
25
33
20
25
30
15.2
17.8
20
20
36
38
20
30
33
23
16.5
32
16.5
20
22
28
38
43
23
38
36
25
28
34
17.8
23
23
A
B
17.8 23
20
25
25
30
17.8 23
19.1 25
23
30
17.8 23
19.1 23
23
28
15.2 17.8
15.2 20
17.8 23
19.1 24
23
30
25
33
16.5 22
23
30
25
33
19.1 23
20
25
24
30
17.8 23
20
25
20
28
20
25
30
38
33
43
20
25
28
36
28
36
20
23
23
30
25
33
15.2 20
17.8 23
17.8 25
C
28
36
43
29
36
41
28
23
36
23
28
30
30
41
43
27
41
46
28
38
39
30
36
36
33
48
51
33
48
48
28
41
43
28
33
36
†Since the pressures of the air and liquid lines are independently controlled, any combination of these air and liquid pressures can be used. The total
air capacity is the sum of the atomizing air l/min and the fan air l/min. For instance, for atomizing air at 1 bar and fan air at 2.1 bar, the total is equal to
15 l/min + 125 l/min for a total of 140 l/min.
††At 0 bar fan air pressure the spray forms a round spray pattern. Request Data Sheets 37459M-V67B, 37459M-V67A and 37459M-V67.
Spray set-ups are interchangeable, but each set-up uses a different needle size.
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F41
Air Atomizing
Nozzles
Spray
Set-up
No.
*At the stated pressure in bar.
Air Atomizing Nozzles
Pressure Spray Set-ups, External Mix,
VAU Series
Performance Data
VAU
Spray
Set-up
No.
SUV113A
SUV113
SUV128
SUV152
*At the stated pressure in bar.
Spray
Set-up
Consists of
Fluid and
Air Cap
Combination
Fluid Cap
VF3578
+
Air Cap
VA113293-60
Fluid Cap
VF4078
+
Air Cap
VA113293-60
Fluid Cap
VF60100
+
Air Cap
VA1282125-60
Fluid Cap
VF80125
+
Air Cap
VA1522125-60
Air Capacity*†
Press.
Spray Coverage (centimeters) at Indicated Distance from Nozzle
Liquid Capacity*†
Atomizing
Fan Air
Air
l/min
l/min
Press.
Cap.
l/h
Atom.
Air
Press.
.69
1.0
1.4
2.1
2.8
3.4
4.1
4.8
5.5
6.2
44
55
67
90
113
134
156
179
198
219
100
126
151
203
253
300
348
396
439
487
.21
.21
.34
.34
.69
.69
1.0
1.0
1.4
1.4
13.6
13.6
17.6
17.6
25
25
30
30
35
35
1.5
.69
1.0
1.4
2.1
2.8
3.4
4.1
4.8
5.5
6.2
44
55
67
90
113
134
156
179
198
219
100
126
151
203
253
300
348
396
439
487
.21
.21
.34
.34
.69
.69
1.0
1.0
1.4
1.4
18.4
18.4
24
24
34
34
42
42
48
48
1.5
.69
1.0
1.4
2.1
2.8
3.4
4.1
4.8
5.5
6.2
46
56
67
88
110
132
153
176
198
221
110
139
168
229
289
348
405
462
515
566
.21
.21
.34
.34
.69
.69
1.0
1.0
1.4
1.4
38
38
49
49
70
70
86
86
99
99
1.5
.69
1.0
1.4
2.1
2.8
3.4
4.1
4.8
5.5
6.2
50
62
75
101
125
150
174
198
221
244
109
136
165
221
277
331
385
436
487
532
.21
.21
.34
.34
.69
.69
1.0
1.0
1.4
1.4
69
69
89
89
126
126
155
155
179
179
1.5
Fan Air Pressure
Water
Press.
.20
.70
1.5
.20
.70
1.5
.20
.70
1.5
.20
.70
1.5
.20
.70
1.5
.20
.70
1.5
.20
.70
1.5
.20
.70
1.5
.20
.70
1.5
.20
.70
1.5
.20
.70
1.5
.20
.70
1.5
.20
.70
1.5
.20
.70
1.5
.20
.70
1.5
.20
.70
1.5
2
3
6
2
3
6
2
3
6
2
3
6
0††
A
6.4
6.4
5.1
6.4
6.4
6.4
6.4
6.4
6.4
6.4
6.4
6.4
6.4
6.4
5.1
6.4
6.4
5.1
6.4
6.4
6.4
6.4
5.1
5.1
7.6
–
–
7.6
6.4
–
7.6
6.4
6.4
7.6
7.6
7.6
7.6
–
–
7.6
–
–
7.6
7.6
–
7.6
8.9
6.4
B
7.6
8.9
7.6
7.6
8.9
8.9
7.6
8.9
8.9
8.9
8.9
8.9
8.9
8.9
7.6
8.9
8.9
7.6
8.9
8.9
8.9
8.9
7.6
7.6
10.2
–
–
10.2
8.9
–
10.2
8.9
8.9
10.2
10.2
10.2
10.2
–
–
10.2
–
–
10.2
8.9
–
10.2
10.2
8.9
0.3
0.7
1.5
C
A
B
C
A
B
C
A
B
C
12.7 8.9 11.4 15.2 15.2 17.8 23
25
33
41
12.7 8.9 11.4 17.8 15.2 23
30
28
38
51
12.7 8.9 11.4 20 15.2 20
28
28
38
53
12.7 7.6 10.2 14.0 10.2 12.7 17.8 17.8 23
30
12.7 8.9 11.4 15.2 12.7 17.8 23
20
28
38
14.0 7.6 12.7 17.8 10.2 15.2 23
20
30
41
12.7 7.6 10.2 15.2 8.9 11.4 16.5 15.2 20
25
12.7 8.9 10.2 15.2 10.2 12.7 16.5 15.2 23
30
12.7 8.9 11.4 16.5 10.2 14.0 20 17.8 25
36
12.7 6.4 8.9 12.7 6.4 8.9 12.7 10.2 12.7 15.2
12.7 6.4 10.2 14.0 7.6 10.2 15.2 10.2 15.2 20
12.7 7.6 10.2 15.2 7.6 10.2 16.5 11.4 15.2 23
15.2 7.6 11.4 15.2 15.2 20
25
25
36
46
12.7 10.2 12.7 17.8 17.8 23
30
28
38
53
12.7 8.9 11.4 16.5 15.2 23
30
28
38
48
15.2 7.6 10.2 15.2 10.2 15.2 20
20
28
36
12.7 7.6 10.2 15.2 11.4 15.2 20
23
28
43
12.7 7.6 11.4 15.2 11.4 15.2 23
23
30
43
15.2 7.6 10.2 16.5 8.9 12.7 17.8 16.5 23
28
14.0 7.6 11.4 17.8 10.2 15.2 20 17.8 25
33
14.0 7.6 10.2 17.8 8.9 12.7 20 17.8 25
33
15.2 6.4 8.9 15.2 6.4 10.2 15.2 10.2 12.7 19.1
12.7 6.4 7.6 14.0 6.4 8.9 14.0 10.2 15.2 20
15.2 6.4 8.9 15.2 7.6 10.2 15.2 11.4 15.2 19.1
12.7 7.6 10.2 15.2 12.7 17.8 23
23
30
41
–
7.6 12.7 15.2 12.7 17.8 25
20
30
41
–
–
–
–
–
–
–
–
–
–
12.7 8.9 11.4 16.5 10.2 15.2 20 15.2 20
28
12.7 7.6 10.2 14.0 10.2 15.2 22 17.8 23
38
–
–
–
–
–
–
–
–
–
–
14.0 7.6 11.4 15.2 8.9 12.7 17.8 15.2 20
28
12.7 8.9 11.4 15.2 10.2 12.7 17.8 15.2 20
27
12.7 7.6 10.2 16.5 7.6 12.7 20 15.2 20
28
15.2 7.6 10.2 15.2 7.6 10.2 15.2 10.2 12.7 17.8
15.2 7.6 10.2 15.2 7.6 10.2 15.2 10.2 15.2 20
14.0 7.6 10.2 15.2 7.6 10.2 15.2 10.2 15.2 20
12.7 11.4 15.2 22 15.2 20
28
25
30
43
–
–
–
–
–
–
–
25
36
43
–
–
–
–
–
–
–
–
–
–
12.7 8.9 12.7 17.8 12.7 16.5 23
20
28
38
–
–
–
– 12.7 17.8 23
20
28
38
–
–
–
–
–
–
–
–
–
–
14.0 10.2 12.7 17.8 12.7 15.2 23 17.8 23
30
12.7 8.9 11.4 15.2 11.4 14.0 19.1 15.2 23
30
–
–
–
–
–
–
–
–
–
–
15.2 8.9 11.4 16.5 10.2 12.7 17.8 12.7 15.2 23
14.0 8.9 11.4 16.5 8.9 12.7 19.1 12.7 15.2 23
11.4 7.6 10.2 15.2 8.9 11.4 17.8 10.2 15.2 20
†Since the pressures of the air and liquid lines are independently controlled, any combination of these air and liquid pressures can be used. The total
air capacity is the sum of the atomizing air l/min and the fan air l/min. For instance, for atomizing air at 1 bar and fan air at 2.1 bar, the total is equal to
15 l/min + 125 l/min for a total of 140 l/min.
††At 0 bar fan air pressure the spray forms a round spray pattern. Request Data Sheets 37459M-V113A, 37459M-V113, 37459M-V128 and 37459M-V152.
Spray set-ups are interchangeable, but each set-up uses a different needle size.
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F42
Nozzle Bodies/Nozzle Assemblies,
1/2J Series
1/2J
1/2J Series air atomizing nozzles
Plug CP1706
1/2J
Spray set-up
1/2" NPT or BSPT
Shut-off
needle assembly 12810
1/2JN
1
2
3
4
5
1. Retainer ring CP1705
2. Air cap
3. Fluid cap
4. Fluid cap gasket CP8491
5. Nozzle body CP1701
1/2JN
1/2JCO
1/2JCO
Features and Benefits
• 1/2J air atomizing series ranges in capacity from 4.1 to 306 gph (15.5 to 1158 l/h).
• The nozzles are available with shut-off and clean-out needles.
• 1/2J body has liquid and air feeds at opposite ends of the body and is provided with a removable
plug so other needle assemblies may be added in the future.
• 1/2JN features a manual shut-off needle that enables the flow of liquid to be stopped.
1/2" NPT or BSPT
with clean-out needle
• 1/2JCO features a clean-out needle that is activated manually.
– The needle slides through the liquid orifice to clear obstructions.
– Ideal for intermittent spraying applications when liquid can dry in the orifice between uses.
Optimization Tips
• See page F2 for optimization tips.
See Also
http://
• Accessories
– Air line filters
– Air pressure regulators
Materials
Material
Material
Code
– Pressure gauges
– Strainers
Complete Nozzle Assembly
Nozzle Type
J
JN
Nozzle Body*
JCO
Nickel-plated Brass
(none)
l
l
l
303 Stainless Steel
SS
l
l
l
SSBR
l
l
l
SS
l
l
l
Spray Set-ups
303 Stainless Steel
– Solenoid valves
Ordering Info
Nozzle Bodies
Nickel-plated Brass Air Cap and
303 Stainless Steel Fluid Cap
– Liquid pressure regulators
1/2
JN
Inlet
Conn.
Nozzle
Body
Assembly
Type
l
l
Spray Set-up Only
Spray Set-up
– SS + SU77 –
l
l
Material
Code
Spray
Set-up
No.
SS
l
Material
Code
*Includes retainer and gasket.
BSPT connections require the addition of a “B” prior
to the nozzle body inlet connection.
To order fluid cap only, use fluid cap number (shown in
performance data charts) and material code: 250375-SS.
To order air cap only, use air cap number (shown in
performance data charts) and material code: 422-6-73-70°.
Spray Set-up
SU77 –
l
Spray
Set-up
No.
SS
l
Material
Code
To order spray set-up
only, use spray set-up
and material code:
SU77-SS.
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F43
Air Atomizing
Nozzles
1/2" NPT or BSPT
with shut-off needle
Clean-out needle
assembly 11829
Air Atomizing Nozzles
Nozzle Bodies/Nozzle Assemblies, 1/2J Series
Features and Benefits
Optimization Tips
• JBC features the center lines of the air and liquid inlet entering
in the back of the nozzle and parallel to the spray projection axis.
• See page F2 for optimization tips.
• 1/2JBCJ features a steam jacket around the nozzle body
for spraying liquids that are too viscous to spray at room
temperature.
See Also
• 2J is a dual spray assembly with opposing spray set-ups
perpendicular to opposing air and liquid inlets.
• Accessories
– Air line filters
• Thick wall adapters replace retainer rings on nozzle assemblies
and fit into threaded wall openings holding the nozzle securely
in place.
– Air pressure regulators
http://
– Pressure gauges
– Solenoid valves
– Liquid pressure regulators
– Strainers
• For JBC, request Data Sheets 4921, 6885 and 6185
• For 1/2JBCJ, request Data Sheets 4610 and 6331
• For 2J, request Data Sheets 5356 and 6530
• For thick wall adapters, request Data Sheets 3378,
7003 and 7323
Back Connect
1/2" NPT or BSPT (F)
inlet connection
Steam Jacket
Twin Spray
3/8" NPT or BSPT (F)
steam inlet/outlet connection
1/2" NPT or BSPT (F)
air and liquid inlet connection
1/2" NPT or BSPT (F)
inlet connection
Thick Walls
Please refer to data sheets
1/2JBC air atomizing nozzle
1/2JBC air atomizing nozzle used to spray
seasoned cooking oil onto corn snacks.
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F44
Pressure Spray Set-ups, Internal Mix,
1/2J Series
Features and Benefits
Air Caps
• For wide angle round, round, 360° circular and flat sprays, dimensions “A”, “B” and “C” are the
pattern widths at distances from the nozzle.
• The total distance of spray projection from the nozzle to the maximum dispersal point is
represented by “D”.
• When using a pressure-fed liquid system, the liquid is supplied to the nozzle under pressure.
• The liquid and compressed air or gas are mixed internally to produce a completely atomized spray.
Wide angle round, round, flat
and 360° circular spray air
caps produce wide angle round
hollow cone spray, round hollow
cone spray, flat spray and 360°
circular spray patterns.
Fluid cap
C
B
A
Air cap
9"
(23 cm)
18" (46 cm)
27" (69 cm)
D
8491
gasket
1705 retainer ring
Air Atomizing
Nozzles
8491 gasket must be ordered separately from the spray set-up, but is included in the
standard nozzle assembly. Please contact your sales engineer.
Performance Data
Flat Spray
*At the stated pressure in bar.
Spray
Set-up
Spray
Consists of Spray
Set-up
Fluid and Pattern
No.
Air Cap
Combination
SU75
SU85
Fluid Cap
250375
+
Air Cap
4533102
Fluid Cap
251376
+
Air Cap
4693102
Flat
Flat
Liquid Capacity (liters per hour)* and Air Capacity (liters per minute)*
Spray
Dimensions
Liquid Pressure
0.35
1
2
3
4
Air
Air
Air
Air
Air
Air
Air
Air
Air
Air
A
B
C
D
l/h
l/h
l/h
l/h
l/h
Air* Liquid*
Press.
l/min Press.
l/min Press.
l/min Press.
l/min Press.
l/min
(cm) (cm) (cm) (m)
–
–
–
1.8
154
590
3.4
184
950
–
–
–
–
–
–
–
–
–
2.0
119
640
3.5
157 1010
–
–
–
–
–
–
–
–
–
2.1
93
690
3.7
133 1060
–
–
–
–
–
–
–
–
–
–
–
–
3.8
112 1110
–
–
–
–
–
–
.70
134
315
1.3
320
440
2.1
575
570
3.0
740
710
3.9
840
860
.85
100
380
1.4
255
520
2.2
505
640
3.1
690
770
4.1
790
930
–
–
–
1.5
200
590
2.4
440
720
3.2
630
840
4.2
740
990
–
–
–
1.7
154
670
2.5
380
790
3.4
570
910
4.4
690 1070
–
–
–
–
–
–
2.7
330
860
3.5
520
980
4.5
650 1140
–
–
–
–
–
–
2.8
275
930
3.7
470 1050
4.6
600 1210
–
–
–
–
–
–
3.0
235 1010
3.8
420 1120
4.8
550 1280
–
–
–
–
–
–
3.1
195 1080
3.9
345 1190
4.9
510 1350
–
–
–
–
–
–
–
–
–
4.1
325 1260
5.1
465 1430
–
–
–
–
–
–
–
–
–
–
–
–
5.2
425 1490
–
–
–
–
–
–
–
–
–
–
–
–
5.3
390 1560
–
–
–
–
–
–
–
–
–
–
–
–
5.5
350 1640
2.0
1.0
46
76
91
5.8
3.5
2.0
51
79
97
7.0
.70
.35
51
86
119 4.0
1.4
1.0
86
157
211 4.6
2.5
2.0
86
157
208 5.2
3.4
3.0
91
168
216 5.8
4.5
4.0
91
170
226 6.4
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F45
Air Atomizing Nozzles
Pressure Spray Set-ups, Internal Mix,
1/2J Series
Performance Data
Wide Angle Round and Round Spray
Spray
Set-up
Spray
Consists of Spray
Set-up
Fluid and Pattern
No.
Air Cap
Combination
SU77
SU78
SU79
SU89
SU72
SU82
Fluid Cap
250375
Wide
+
Angle
Air Cap
Round
422-6-73-70°
Fluid Cap
250375
Wide
+
Angle
Air Cap
Round
422-6-94-70°
Fluid Cap
250375
+
Air Cap
469-6-12570°
Fluid Cap
251376
+
Air Cap
469-6-13070°
Fluid Cap
250375
+
4221250
Fluid Cap
251376
+
Air Cap
4691312
Wide
Angle
Round
Wide
Angle
Round
Round
Round
*At the stated pressure in bar.
Liquid Capacity (liters per hour)* and Air Capacity (liters per minute)*
Spray
Dimensions
Liquid Pressure
0.35
1
2
3
4
Air
Air
Air
Air
Air
Air
Air
Air
Air
Air
A
l/h
l/h
l/h
l/h
l/h
Air* Liquid*
Press.
l/min Press.
l/min Press.
l/min Press.
l/min Press.
l/min
(cm)
B
(cm)
C
(cm)
D
(m)
–
–
–
–
–
–
2.1
213
176
3.1
316
214
4.2
238
351
2.1
2.0
36
48
69
6.7
–
–
–
–
–
–
2.3
127
249
3.2
195
292
4.3
154
439
3.2
3.0
36
48
69
7.3
–
–
–
–
–
–
–
–
–
3.4
107
371
4.5
100
521
4.3
4.0
36
48
69
8.5
.60
.70
.85
–
–
.70
.85
1.0
–
–
.70
.85
–
–
–
–
–
–
–
–
–
–
1.3
1.4
1.5
1.7
–
–
.70
.85
–
–
–
–
–
–
–
–
–
–
102
57
32
–
–
129
82
45
–
–
134
100
–
–
–
–
–
–
–
–
–
–
34
25
20
15.5
–
–
134
100
–
–
–
–
–
–
–
–
–
–
184
230
280
–
–
325
380
415
–
–
315
380
–
–
–
–
–
–
–
–
–
–
350
390
415
445
–
–
315
380
–
–
–
–
–
–
–
–
–
–
1.1
1.3
1.4
–
–
1.7
1.8
–
–
–
1.3
1.4
1.5
1.7
–
–
–
–
–
–
–
–
1.7
1.8
2.0
2.1
2.3
2.4
1.3
1.4
1.5
1.7
–
–
–
–
–
–
–
–
215
124
84
–
–
182
143
–
–
–
320
255
200
154
–
–
–
–
–
–
–
–
146
121
102
86
72
60
320
255
200
154
–
–
–
–
–
–
–
–
153
230
280
–
–
540
590
–
–
–
440
520
590
670
–
–
–
–
–
–
–
–
365
395
430
460
490
520
440
520
590
670
–
–
–
–
–
–
–
–
2.5
2.7
2.8
3.0
3.1
3.1
3.2
3.4
3.5
3.6
2.1
2.2
2.4
2.5
2.7
2.8
3.0
3.1
–
–
–
–
3.0
3.1
3.2
3.4
3.5
3.6
2.1
2.2
2.4
2.5
2.7
2.8
3.0
3.1
–
–
–
–
185
146
112
86
65
265
245
173
136
120
575
505
440
380
330
275
235
195
–
–
–
–
230
200
176
154
135
118
575
505
440
380
330
275
235
195
–
–
–
–
355
410
465
520
580
810
860
910
950
980
570
640
720
790
860
930
1010
1080
–
–
–
–
510
550
590
620
660
700
570
640
720
790
860
930
1010
1080
–
–
–
–
3.7
3.9
4.0
4.2
4.6
4.3
4.6
5.0
–
–
3.0
3.1
3.2
3.4
3.5
3.7
3.8
3.9
4.1
–
–
–
–
–
–
–
–
–
3.0
3.1
3.2
3.4
3.5
3.7
3.8
3.9
4.1
–
–
–
192
150
119
86
51
350
260
186
–
–
740
690
630
570
520
470
420
345
325
–
–
–
–
–
–
–
–
–
740
690
630
570
520
470
420
345
325
–
–
–
560
620
680
770
910
1000
1080
1200
–
–
710
770
840
910
980
1050
1120
1190
1260
–
–
–
–
–
–
–
–
–
710
770
840
910
980
1050
1120
1190
1260
–
–
–
5.0
5.3
5.6
–
–
–
–
–
–
–
3.9
4.1
4.2
4.4
4.5
4.6
4.8
4.9
5.1
5.2
5.3
5.5
–
–
–
–
–
–
3.9
4.1
4.2
4.4
4.5
4.6
4.8
4.9
5.1
5.2
5.3
5.5
230
158
108
–
–
–
–
–
–
–
840
790
740
690
650
600
550
510
465
425
390
350
–
–
–
–
–
–
840
790
740
690
650
600
550
510
465
425
390
350
830
940
1080
–
–
–
–
–
–
–
860
930
990
1070
1140
1210
1280
1350
1430
1490
1560
1640
–
–
–
–
–
–
860
930
990
1070
1140
1210
1280
1350
1430
1490
1560
1640
.70
1.3
2.8
4.0
5.3
.35
1.0
2.0
3.0
4.0
33
34
33
34
36
47
48
47
48
48
65
67
65
67
69
6.1
7.9
6.4
7.3
8.2
.85
.35
36
50
69
7.9
1.7
1.0
33
48
66
7.3
3.4
2.0
33
47
66
7.0
4.6
3.0
36
50
69
8.5
.70
.35
33
64
91
3.4
1.4
1.0
33
66
91
4.9
2.5
2.0
28
56
81
6.1
3.4
3.0
28
53
74
6.7
4.5
4.0
28
56
79
7.6
1.4
.35
9
16
25
6.7
2.0
1.0
9
16
25
7.3
3.2
2.0
9
16
25
8.2
.70
.35
10
18
23
7.0
1.4
1.0
15
25
33
6.4
2.5
2.0
13
20
25
11.3
3.4
3.0
10
18
25
12.5
4.5
4.0
10
18
25
14.3
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F46
Pressure Spray Set-ups, External Mix,
1/2J Series
Features and Benefits
Air Caps
• The dimensions “A”, “B” and “C” are the pattern widths at distances from the nozzle.
• The total distance of spray projection from the nozzle to the maximum dispersal point is represented
by “D”.
• SUE75 and SU380C are pressure set-ups using pressurized liquids.
Flat spray air caps produce
a flat spray pattern.
• In SU380C, the air and liquid mix internally, while in SUE75, they mix externally.
• SU70 is a siphon set-up with the air and siphoned liquid mixing externally.
Air cap
C
B
Fluid cap
A
Flat spray
pattern
9"
(23 cm)
18" (46 cm)
27" (69 cm)
D
8491
gasket
1705 retainer ring
Air Atomizing
Nozzles
1705 retainer ring and 8491 gasket must be ordered separately from the spray set-up, but are included in
the standard nozzle assembly. Please contact your sales engineer.
Performance Data
Flat Spray (External Mix)
Spray
Set-up
Spray
Consists of
Set-up
Fluid and
No.
Air Cap
Combination
SUE75
Fluid Cap
250375
+
Air Cap
14356
*At the stated pressure in bar.
Liquid Capacity (liters per hour)* and Air Capacity (liters per minute)*
Spray
Dimensions
Liquid Pressure
0.2
0.35
0.5
0.7
1
Air
Air
Air
Air
Air
Air
Air
Air
Air
l/h
l/h
l/h
l/h
Press.
l/min Press.
l/min Press.
l/min Press.
l/min Press.
2.1
522
877
2.8
681 1075
3.15
795 1174
3.85
953 1358
5.6
2.45
522
962
3.15
681 1174
3.5
795 1273
4.2
953 1457
6.0
2.8
522 1075
3.5
681 1273
3.85
795 1358
4.9
953 1641
6.3
3.15
522 1174
3.85
681 1358
4.2
795 1457
5.25
953 1754
6.6
681 1457
4.55
795 1556
5.6
953 1839
7.0
4.9
795 1641
6.0
953 1952
–
–
–
–
4.2
–
–
–
–
–
–
l/h
Air
A
B
Air* Liquid*
l/min
(cm) (cm)
1158 1839 2.45
1158 1952
3.5
1158 2037
3.85
1158 2122
4.9
1158 2207
6.3
–
–
C
(cm)
D
(m)
.20
21.6
36.8
52
5.8
.35
22.9
42
55
6.7
.50
24.1
44.5
58
7.0
.70
24.1
46
61
7.6
1.0
25.4
48
66
8.9
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F47
Air Atomizing Nozzles
Pressure Spray Set-ups, External Mix,
1/2J Series
Performance Data
360° Circular Spray
Spray
Set-up
No.
SU380C
Spray
Set-up
Consists of
Fluid and
Air Cap
Combination
Fluid Cap
251376
+
Air Cap
469-6-130160HC
*At the stated pressure in bar.
Liquid Capacity (liters per hour)* and Air Capacity (liters per minute)*
Liquid Pressure
0.7
1.4
2.1
2.8
Air
l/h
Press.
Air
Air
l/h
l/min Press.
Air
Air
l/h
l/min Press.
Air
Air
l/h
l/min Press.
4.2
Air
Air
Air
l/h
l/min Press.
l/min
1.0
213
345
1.7
394
453
2.5
439
634
3.35
462
787
5.0
484 1138
1.1
145
418
1.8
324
526
2.65
372
702
3.5
416
843
5.2
439 1197
1.25
97.6
575
1.95
275
574
2.8
322
750
3.65
372
891
5.3
409 1254
1.4
59
538
2.1
207
642
2.95
277
818
3.8
325
956
5.5
366 1310
–
–
–
2.25
159
702
3.1
272
874
3.9
282
1019
5.6
325 1367
–
–
–
2.4
116
758
3.2
188
931
4.05
250
1084
5.8
297 1429
–
–
–
2.5
93
829
3.35
145
990
4.2
209
1135
5.9
257 1486
–
–
–
2.65
27
900
3.5
114
1050
4.35
168
1189
6.0
232 1551
–
–
–
–
–
–
–
–
–
4.5
141
1259
6.3
182 1670
–
–
–
–
–
–
–
–
–
4.6
77
1296
–
–
360° circular spray pattern
–
Odor control at a compost facility using air atomizing nozzles.
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F48
Siphon/Gravity-Fed Spray Set-ups,
External Mix, 1/2J Series
Air Caps
Air cap
C
B
Fluid cap
A
Round spray
pattern
9"
(23 cm)
18" (46 cm)
27" (69 cm)
Round spray siphon air caps
produce a round spray pattern.
D
8491
gasket
1705
retainer ring
1705 retainer ring and 8491 gasket must be ordered separately from the spray set-up,
but are included in the standard nozzle assembly. Please contact your sales engineer.
Refer to page F3 for Siphon/Gravity-Fed Liquid Spray Set-ups diagram.
Performance Data
Round Spray Siphon Set-ups
SU70
Fluid Cap
250375
+
Air Cap
437
*At the stated pressure in bar.
Atomizing
Air
Liquid Capacity
(liters per hour)*
Air
Press.
Air
Capacity
l/min
Gravity Head (cm)
45
30
15
10
.70
360
–
–
–
1.5
570
–
–
–
2.0
660
–
–
3.0
870
–
3.5
990
4.0
1100
Spray Dimensions
at 20 cm Siphon Height
Siphon Height (cm)
20
30
60
40
–
–
–
97
64
–
–
–
117
90
–
–
260
225
150
123
90
–
300
265
235
163
133
104
–
305
270
240
170
143
115
–
5.0
1300
315
280
250
183
157
129
53
5.6
1450
320
290
255
188
164
136
62
Air*
A
(cm)
B
(cm)
C
(cm)
D
(m)
1.5
8
15
22
6.1
2.0
8
15
22
6.7
3.0
8
15
22
7.3
3.5
8
15
22
7.9
4.0
8
15
22
8.8
5.0
8
15
22
9.8
5.6
8
15
22
10.7
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F49
Air Atomizing
Nozzles
Spray
Set-up
No.
Spray
Set-up
Consists of
Fluid and
Air Cap
Combination
Air Atomizing Nozzles
Nozzle Bodies/Nozzle Assemblies,
1J Series
1J Series air atomizing
Spray set-up
1J
1
3
Shut-off
needle assembly 12810
4
1. Retainer ring CP5713
2. Air cap
3. Fluid cap
4. Nozzle body CP5710
1JN
1J
2
Plug CP1706
Features and Benefits
1JN
• Range in capacity from 24 to 1740 gph (91 to 6586 l/h).
• Available with a shut-off needle.
• 1J features liquid and air feeds at opposite ends of the body and
are provided with a removable plug so other needle assemblies
may be added in the future.
1" NPT or BSPT (F)
1" NPT or BSPT (F)
with shut-off needle
• 1JN features a manual shut-off needle that enables the flow of
liquid to be stopped.
Optimization Tips
See Also
• See page F2 for optimization tips.
• Accessories
– Air line filters
Materials
Material
http://
– Pressure gauges
– Air pressure regulators
– Solenoid valves
– Liquid pressure regulators
– Strainers
Ordering Info
Material
Code
Complete Nozzle Assembly
Nozzle Type
J
Nozzle Body*
JN
Nozzle Bodies
1
JN
Inlet
Conn.
Nozzle
Body
Assembly
Type
l
l
– SS
l
Spray Set-up Only
Spray Set-up
+
SU159 –
l
Spray Set-up
SS
l
Nickel-plated Brass
(none)
l
l
303 Stainless Steel
SS
l
l
SSBR
l
l
SS
BSPT connections require the addition of a “B” prior to
the nozzle body inlet connection.
l
l
To order fluid cap only, use fluid cap number (shown in
performance data charts) and material code: 4371000-SS.
Spray Set-ups
Nickel-plated Brass Air Cap and
303 Stainless Steel Fluid Cap
303 Stainless Steel
Material
Code
Spray
Set-up
No.
Material
Code
*Includes retainer and gasket.
SU159 –
l
Spray
Set-up
No.
SS
l
Material
Code
To order spray set-up
only, use spray set-up
number and material
code: SU159-SS.
To order air cap only, use air cap number (shown in
performance data charts) and material code: 1109-6-224-70-SS.
To order spray nozzle without set-up, use inlet connection,
nozzle body and material code: 1JN-SS.
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F50
Pressure Spray Set-ups, Internal Mix,
1J Series
Features and Benefits
Air Caps
• For wide angle round, round and flat sprays, dimensions “A”, “B” and “C” are the pattern widths
at distances from the nozzle.
• The total distance of spray projection from the nozzle to the maximum dispersal point is
represented by “D”.
• When using a pressure-fed liquid system, the liquid is supplied to the nozzle under pressure.
• The liquid and compressed air or gas are mixed internally to produce a completely atomized spray.
Wide angle round, round,
and flat spray air caps
produce hollow cone, wide
angle round spray, round
and flat spray patterns.
Fluid cap
C
Air cap
B
A
12"
(30 cm)
30" (76 cm)
48" (122 cm)
D
5713 retainer ring
Air Atomizing
Nozzles
5713 retainer ring must be ordered separately from the spray set-up, but is included in
the standard nozzle assembly. Please contact your sales engineer.
Performance Data
Wide Angle Round
Spray
Set-up
Spray
Consists of Spray
Set-up
Fluid and Pattern
No.
Air Cap
Combination
Fluid Cap
4371000
+
SU159
Air Cap
1109-6-22470°
Wide
Angle
Round
*At the stated pressure in bar.
Liquid Capacity (liters per minute)* and Air Capacity (liters per minute)*
Spray
Dimensions
Liquid Pressure
0.7
1.5
2
3
4
Air
Air
Air
Air
Air
Air
Air
Air
Air
Air
A
B
C
D
l/min
l/min
l/min
l/min
l/min
Air* Liquid*
Press.
l/min Press.
l/min Press.
l/min Press.
l/min Press.
l/min
(cm) (cm) (cm) (m)
.85
12.1 1220
1.8
16.3 1840
2.2
19.5 2050
3.1
30
2360
4.2
33
3110
1.0
9.1 1440
2.0
13.2 2110
2.4
16.1 2350
3.2
26
2650
4.4
30
3410
1.1
6.4 1730
2.1
10.7 2420
2.5
13.3 2650
3.4
23
2940
4.5
26
3720
–
–
–
2.2
8.5 2720
2.7
11.2 2940
3.5
19.7 3240
4.6
24
4040
–
–
–
2.4
6.8 3030
2.8
9.2 3230
3.7
17.0 3530
4.8
21
4330
–
–
–
–
–
–
3.0
7.6 3510
3.8
14.7 3820
4.9
18.9 4670
–
–
–
–
–
–
–
–
–
3.9
12.7 4120
5.1
17.0 5010
–
–
–
–
–
–
–
–
–
4.1
11.0 4420
5.2
15.2 5380
–
–
–
–
–
–
–
–
–
4.2
9.5 4810
5.3
13.7 5750
1.0
1.8
2.2
2.2
3.0
3.5
4.2
4.2
5.1
.70
1.5
1.5
2.0
2.0
3.0
3.0
4.0
4.0
48
53
43
56
48
51
43
55
48
94
102
84
107
93
112
102
119
104
140
150
119
147
137
157
137
170
142
4.3
5.4
7.6
7.0
10.0
11.3
14.0
12.8
15.5
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F51
Air Atomizing Nozzles
Pressure Spray Set-ups, Internal Mix,
1J Series
Performance Data
Round and Flat Spray
Spray
Set-up
Spray
Consists of Spray
Set-up
Fluid and Pattern
No.
Air Cap
Combination
SU152
SU172
SU155
Fluid Cap
4371000
+
Air Cap
11091547
Fluid Cap
6251000
+
Air Cap
11251625
Fluid Cap
4371000
+
Air Cap
11093187
Round
Round
Flat
*At the stated pressure in bar.
Liquid Capacity (liters per minute)* and Air Capacity (liters per minute)*
Spray
Dimensions
Liquid Pressure
0.7
1.5
2
3
4
A
B
C
D
Air
Air
Air
Air
Air
Air
Air
Air
Air
Air
Air* Liquid*
l/min
l/min
l/min
l/min
l/min
(cm) (cm) (cm) (m)
Press.
l/min Press.
l/min Press.
l/min Press.
l/min Press.
l/min
.85
12.1 1220
1.8
16.3 1840
2.2
19.5 2050
3.1
30
2360
4.2
33
3110
1.0
9.1 1440
2.0
13.2 2110
2.4
16.1 2350
3.2
26
2650
4.4
30
3410
1.1
6.4 1730
23
2.1
10.7 2420
2.5
13.3 2650
3.4
2940
4.5
26
3720
–
–
–
2.2
8.5 2720
2.7
11.2 2940
3.5
19.7 3240
4.6
24
4040
–
–
–
2.4
6.8 3030
2.8
9.2 3230
3.7
17.0 3530
4.8
21
4330
–
–
–
–
–
–
3.0
7.9 3510
3.8
14.7 3820
4.9
18.9 4670
–
–
–
–
–
–
–
–
–
3.9
12.7 4120
5.1
17.0 5010
–
–
–
–
–
–
–
–
–
4.1
11.0 4420
5.2
15.2 5380
13.7 5750
–
–
–
–
–
–
–
–
–
4.2
9.5 4810
5.3
.85
22
1370
1.7
37
1780
2.0
48
1560
3.1
54
2270
4.1
65
2360
1.0
16.7 2320
1.8
32
2290
2.1
42
1950
3.2
49
2630
4.2
61
2660
1.1
13.1 3620
2.0
28
3000
2.2
37
2400
3.4
46
3030
4.6
52
3480
1.3
10.4 5300
2.1
25
3840
2.4
34
2920
3.5
42
3510
4.9
46
4520
–
–
–
2.2
22
4930
2.5
30
3430
3.7
39
3990
–
–
–
–
–
–
–
–
–
–
–
–
3.8
37
4590
–
–
–
.85
12.1 1220
1.8
16.3 1840
2.2
19.5 2050
3.1
30
2360
4.2
33
3110
1.0
9.1 1440
2.0
13.2 2110
2.4
16.1 2350
3.2
26
2650
4.4
30
3410
1.1
6.4 1730
23
2.1
10.7 2420
2.5
13.3 2650
3.4
2940
4.5
26
3720
–
–
–
2.2
8.5 2720
2.7
11.2 2940
3.5
19.7 3240
4.6
24
4040
–
–
–
2.4
6.8 3030
2.8
9.2 3230
3.7
17.0 3530
4.8
21
4330
–
–
–
–
–
–
3.0
7.6 3510
3.8
14.7 3820
4.9
18.9 4670
–
–
–
–
–
–
–
–
–
3.9
12.7 4120
5.1
17.0 5010
–
–
–
–
–
–
–
–
–
4.1
11.0 4420
5.2
15.2 5380
–
–
–
–
–
–
–
–
–
4.2
9.5 4810
5.3
13.7 5750
1.0
1.8
2.2
2.2
3.0
3.5
4.2
4.2
5.1
.70
1.5
1.5
2.0
2.0
3.0
3.0
4.0
4.0
10.2
10.2
10.2
10.2
10.2
10.2
10.2
12.7
12.7
20
20
23
23
23
23
25
23
23
30
33
33
33
33
36
38
33
35
9.1
11.0
12.5
11.9
14.0
16.5
19.2
17.9
21.3
1.0
.70
15
28
33
7.6
1.7
1.5
15
28
36
9.1
2.5
2.0
15
25
36
10.7
3.2
3.0
15
25
36
12.8
4.6
4.0
15
28
38
15.2
1.0
1.8
2.2
2.2
3.0
3.5
4.2
4.2
5.1
.70
1.5
1.5
2.0
2.0
3.0
3.0
4.0
4.0
74
81
58
94
81
94
74
124
96
152
163
127
185
167
183
150
223
203
213 6.4
234 7.0
178 7.9
246 7.3
228 8.5
264 9.1
224 10.0
320 9.4
284 10.3
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F52
Pressure Spray and Siphon/Gravity-Fed
Spray Set-ups, External Mix, 1J Series
Features and Benefits
Air Caps
• For flat spray, dimensions “A”, “B” and “C” are the pattern widths at distances from the nozzle.
– The total distance of spray projection from the nozzle to the maximum dispersal point is
represented by “D”.
– When using a pressure-fed liquid system, the liquid is supplied to the nozzle under pressure.
– The liquid and compressed air or gas are mixed externally to produce a completely atomized spray.
• For round spray, dimensions “A”, “B” and “C” are the pattern widths at distances from the nozzle.
– The total distance of spray projection from the nozzle to the maximum dispersal point is
represented by “D”.
– When using a siphon or gravity-fed liquid system, the liquid is supplied by either a liquid siphon or
a gravity-feed.
– Designed to draw liquid through the feed line into the air flow where it is atomized.
Flat spray and round
spray air caps produce a
flat spray pattern and the
siphon air caps produce a
round spray pattern.
C
Fluid cap
Air cap
B
A
Flat spray
pattern
Air Atomizing
Nozzles
12"
(30 cm)
30" (76 cm)
48" (122 cm)
12415 retainer ring
D
12415 retainer ring must be ordered separately from the spray set-up, but is included
in the standard nozzle assembly. Please contact your sales engineer.
Performance Data
Flat Spray (External Mix)
Spray
Set-up
No.
SUE175B
Spray
Set-up
Consists of Spray
Fluid and Pattern
Air Cap
Combination
Fluid Cap
625780
+
Air Cap
12116
Flat
*At the stated pressure in bar.
Liquid Capacity (liters per minute)* and Air Capacity (liters per minute)*
0.2
0.3
0.5
0.7
Spray
Set-up
No.
SU170
Fluid Cap
6251000
+
Air Cap
1125
1
Air
Air
Air
Air
Air
Air
Air
Air
Air
Air
A
B
C
D
l/min
l/min
l/min
l/min
l/min
Air* Liquid*
Press.
l/min Press.
l/min Press.
l/min Press.
l/min Press.
l/min
(cm) (cm) (cm) (m)
1.4
1.8
2.1
2.8
3.5
4.2
49
49
49
49
49
49
2460
2860
3260
3960
4700
5410
1.8
2.1
2.8
3.5
4.2
4.8
59
59
59
59
59
59
2860
3260
3960
4700
5410
6120
2.1
2.8
3.5
4.2
4.9
5.6
76
76
76
76
76
76
3260
3960
4700
5410
6120
6850
Siphon Set-ups Round Spray
Spray
Set-up
Consists of
Fluid and
Air Cap
Combination
Spray
Dimensions
Liquid Pressure
2.8
3.5
4.2
4.9
5.6
6.3
90
90
90
90
90
90
3960
4700
5410
6120
6850
7590
3.5
4.2
4.9
5.6
6.3
–
107
107
107
107
107
–
4700
5410
6120
6850
7590
–
2.1
2.8
3.5
4.2
4.9
.20
.30
.50
.70
1.0
51
56
58
56
56
91
94
99
97
99
119 7.6
122 8.5
130 9.1
124 9.8
127 10.7
*At the stated pressure in bar.
Atomizing
Air
Liquid Capacity
(liters per minute)*
Spray Dimensions
at 20 cm Siphon Height
Air
Press.
Air
Capacity
l/min
45
30
15
10
20
30
60
1.4
1.75
2.1
2.8
4.2
5.6
7.0
2971
3396
3821
4670
6368
8066
9764
–
19.7
20.1
20.4
20.8
21.2
21.6
–
17.0
17.4
17.8
18.5
18.9
19.3
12.9
13.6
14.4
14.8
15.9
16.6
17.0
7.2
8.3
9.1
9.8
11.0
11.4
11.7
–
–
5.3
6.8
8.3
8.7
9.1
–
–
–
4.2
5.7
6.1
6.4
–
–
–
–
1.5
1.9
2.3
Gravity Head (cm)
Siphon Height (cm)
Air*
A
(cm)
B
(cm)
C
(cm)
D
(m)
2.1
13
26
38
8.8
2.8
13
26
38
10.5
4.2
13
26
38
13.4
5.6
13
26
38
16.5
7.0
13
26
38
19.5
Refer to page F3 for Siphon/Gravity-Fed Liquid Set-ups.
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F53
Air Atomizing Nozzles
Fogger Spray Nozzles,
Special Purpose
23412
Features and Benefits
QJ25655
• 23412 produces high quality, cost-efficient dry fog.
– Drops average fifteen microns in size and less.
– Drop size is adjustable to meet specific industrial needs by
changing the ratio of compressed air to water.
– Maintenance time is reduced because the built-in check
valve, spray tip, and internal strainer are quickly serviced
without tools.
1/4" NPT or BSPT (F)
threaded type
– Can use PVC pipe and low-pressure air tubing.
Split-eyelet type to clamp on
1/2", 3/4", 1" pipe size
– Tip has a relatively large clog-reducing orifice.
• QJ25655 provides fast installation of the nozzle onto the liquid
supply pipe – no additional pipe fittings are required.
– Pipe cutting, threading and brazing are eliminated.
– Features a chemical-resistant, tight-fitting Buna-N seal to
ensure leak-free performance.
Ordering Info
Specifications
Complete Nozzle
Assembly
Complete Nozzle
Assembly
23412 – 1/4 – 20
QJ25655 – 3/4 – 20
l
l
l
Nozzle
Body
Inlet
Conn.
Fluid
Orifice
Dia.
l
l
l
Nozzle
Body
Pipe
Size
Fluid
Orifice
Dia.
Nozzle
Inlet
(in.)
AirJet
Fogger
Type
1/4
23412
Fluid
Orifice
No.
Orifice
Dia.
Nom.
(mm)
16
.41
20
.51
26
.66
Fluid
Orifice
No.
Orifice
Dia.
Nom.
(mm)
16
.41
20
.51
26
.66
BSPT connections require the addition of a “B” prior to the nozzle body
inlet connection.
To Clamp On
Pipe
Size
(in.)
AirJet
Fogger
Type
1/2
3/4
QJ25655
1
Humidification to reduce static charge in paint manufacturing plants.
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F54
Fogger Spray Nozzles,
Special Purpose
Performance Data
23412, QJ25655
*At the stated pressure in bar.
Fluid Orifice No. 16 (0.41 mm Dia.)
Water
Pressure
1.5†
2
3
3.5
4
5
5.5
6
7
Fluid Orifice No. 20 (0.51 mm Dia.)
Water
Pressure
Air Pressure*
1.5
2
3
3.5
4
5
5.5
0.7
1.5
2
3
3.5
4
5
5.5
4.5
4.2
–
–
–
–
–
–
11.7
6.4
–
–
–
–
–
–
42
71
–
–
–
–
–
–
40
79
–
–
–
–
–
–
6.4
6.1
4.5
–
–
–
–
–
13.6
7.9
6.4
–
–
–
–
–
40
68
96
–
–
–
–
–
37
71
102
–
–
–
–
–
7.6
6.1
5.7
5.3
–
–
–
–
16.3
11.7
8.3
–
–
–
–
–
40
68
93
119
–
–
–
–
34
65
96
–
–
–
–
–
7.9
7.2
6.4
5.7
4.9
–
–
–
18.5
14.0
11.7
8.7
–
–
–
–
40
65
91
119
142
–
–
–
34
62
91
119
–
–
–
–
8.7
7.9
7.2
6.4
5.3
4.9
3.0
–
–
16.3
14.0
11.7
8.3
–
–
–
37
65
91
116
142
164
193
–
–
59
85
110
142
–
–
–
9.8
9.1
8.3
7.2
6.4
6.4
5.7
3.8
–
18.2
16.3
13.6
11.7
7.9
–
–
37
65
88
113
139
161
190
215
–
57
82
108
136
167
–
–
10.2
9.8
9.1
8.3
7.6
7.2
6.4
6.1
–
20
18.5
15.9
14.0
11.7
8.3
–
37
62
88
113
139
161
187
212
–
54
76
102
130
159
190
–
11.0
10.6
9.8
9.1
8.3
7.6
7.2
7.2
–
–
20
18.5
16.3
13.6
11.7
–
34
59
88
110
133
161
184
212
–
–
74
99
125
153
205
–
11.7
11.4
10.6
9.8
9.1
8.7
8.3
8.3
–
–
22
20
18.2
16.3
14.0
11.7
34
59
85
110
133
159
184
212
–
–
71
93
122
150
167
205
1.5†
2
3
3.5
4
5
5.5
6
7
*At the stated pressure in bar.
†For applications with liquid pressures below 30 psi (2 bar), request
end cap sub-assembly 21950-20-NYB.
Fluid Orifice No. 26 (0.66 mm Dia.)
Water
Pressure
2
3
3.5
4
5
5.5
6
7
Air Pressure*
0.7
23412, QJ25655
1.5†
*At the stated pressure in bar.
In each line, figures in plain face indicate water atomized in gph (l/h) at
psi (bar) water pressure.
Air Pressure*
0.7
1.5
2
3
3.5
4
5
5.5
12.5
6.8
–
–
–
–
–
–
37
68
–
–
–
–
–
–
16.3
12.9
7.9
–
–
–
–
–
31
59
91
–
–
–
–
–
–
17.0
13.6
9.1
–
–
–
–
–
54
79
110
–
–
–
–
–
20
17.4
14.0
9.5
3.4
–
–
–
51
76
102
133
167
–
–
–
23
20
17.8
14.4
10.6
4.9
–
–
48
71
96
125
153
190
–
–
–
23
21
18.2
15.1
11.4
6.4
–
–
68
93
119
144
175
210
–
–
26
23
21
18.2
15.5
11.7
–
–
65
91
116
142
167
198
–
–
28
26
24
21
18.9
16.3
–
–
62
85
110
136
159
187
–
–
30
28
26
24
22
18.9
–
–
59
82
108
130
156
181
Figures in boldface indicate atomizing air in scfm (Nl/min) at psi (bar)
air pressure.
AirJet Fogger has a horizontal throwing distance of 15' (4.5 m) and will
expand to approximately 8' (2.4 m) wide/3' (.9 m) thick.
1. Values in blue area show optimum evaporation under normal room
conditions, when center line of spray is 5' (1.5 m) from the lower
surface.
2. Values in red area can require up to 10' (3 m) for evaporation. Other
values may be used where extended heat, higher air velocity exist or
where slight surface wetting is permitted.
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F55
Air Atomizing
Nozzles
23412, QJ25655
Air Atomizing Nozzles
DripSafe™
Special Purpose
Fogger Spray Nozzles,
Features and Benefits
• High-volume/high-efficiency air atomization.
• Air requirements are met using an air compressor with a
capacity range that is suitable for the application.
• Produces an adjustable, high-quality dry fog without wetting with
pressure-fed liquid.
• Requires minimal maintenance.
• Ideal for large/open structures and areas with high air exchange rates.
• The flat spray tip has a large orifice that reduces clogging.
• Operation is through a drip safe air-actuated liquid shut-off valve.
• Spray set-up and built-in strainer are quickly removed by
hand if cleaning is required.
• Automatically prevents liquid from spraying until air pressure at the
nozzle is sufficient for fine atomization.
• Spray tip is brass; valve and body polymer.
• Drip safe valve simplifies system construction and control while
improving performance.
• Operates at pressures up to 100 psi (7 bar) with a minimum
air pressure range of 25 to 35 psi (1.7 to 2.5 bar).
• Operates using normal water pressures found in municipal water
systems, eliminating the need for expensive, high-pressure hydraulic
pumps.
• A split-eyelet or saddle clamp version of the AirJet
Fogger (45269 Series) is also available for quick and easy
mounting to the liquid supply pipe.
45265
Optimization Tips
45269
• See page F2 for optimization tips.
Applications
1/4" NPT or BSPT (F)
• Evaporative cooling
• Insecticide spraying
• Fogging
• Plant propagation
• Humidification
Split-eyelet type to clamp on
pipe 1/2" to 1"
See Also
Specifications
Nozzle
Inlet
Conn.
(in.)
1/4
To Clamp On
Pipe
Size
(in.)
AirJet
Fogger
Type
45265
AirJet
Fogger
Type
1/2
3/4
1
45269
Fluid
Orifice
No.
Orifice
Dia.
Nom.
(mm)
16.0
.41
20
.51
26
.66
Fluid
Orifice
No.
Orifice
Dia.
Nom.
(mm)
16.0
.41
20
.51
26
.66
• Accessories
– Air line filters
http://
– Pressure gauges
– Air pressure regulators
– Solenoid valves
– Liquid pressure regulators
– Strainers
• For 23412 and QJ25655, request Data Sheets 23412
and 25635
• For 45265 and 45269, request Data Sheets 45265-1-2
and 45269-1-2
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F56
DripSafe™
Special Purpose
Fogger Spray Nozzles,
Performance Data
45265, 45269
*At the stated pressure in bar.
Fluid Orifice No. 16 (0.41 mm Dia.)
Water
Pressure
1.5
2
2.8
Fluid Orifice No. 20 (0.51 mm Dia.)
Water
Pressure
Air Pressure*
1.5
2
3
3.5
4
5
5.5
0.7
1.5
2
3
3.5
4
5
5.5
4.5
4.2
–
–
–
–
–
–
11.7
6.4
–
–
–
–
–
–
42
71
–
–
–
–
–
–
40
79
–
–
–
–
–
–
6.4
5.7
4.5
–
–
–
–
–
13.6
7.9
6.4
–
–
–
–
–
40
68
96
–
–
–
–
–
37
71
102
–
–
–
–
–
7.6
6.4
5.7
5.3
–
–
–
–
16.3
11.7
8.3
–
–
–
–
–
40
68
93
119
–
–
–
–
34
65
96
–
–
–
–
–
1.5
2
2.8
*At the stated pressure in bar.
In each line, figures in plain face indicate water atomized in gph (l/h)
at psi (bar) water pressure.
Fluid Orifice No. 26 (0.66 mm Dia.)
Water
Pressure
2
2.8
Air Pressure*
0.7
45265, 45269
1.5
*At the stated pressure in bar.
Figures in boldface indicate atomizing air in scfm (Nl/min) at psi (bar)
air pressure.
Air Pressure*
0.7
1.5
2
3
3.5
4
5
5.5
12.5
6.8
–
–
–
–
–
–
37
68
–
–
–
–
–
–
16.3
12.9
7.9
–
–
–
–
–
31
59
91
–
–
–
–
–
–
17.0
13.6
9.1
–
–
–
–
–
54
79
110
–
–
–
–
1. Values in blue area show optimum evaporation under normal
room conditions, when center line of spray is 5' (1.5 m) from the
lower surface.
2. Values in red area can require up to 10' (3 m) for evaporation.
Other values may be used where extended heat, higher air
velocity exist or where slight surface wetting is permitted.
3. AirJet Fogger has a horizontal throwing distance of 15' (4.5 m)
and will expand to approximately 8' (2.4 m) wide/3' (.9 m) thick.
Ordering Info
Complete Nozzle
Assembly
Complete Nozzle
Assembly
45265 – 1/4 – 16
l
l
l
Nozzle
Body
Inlet
Conn.
Fluid
Orifice
Dia.
45269 – 1/2 – 16
l
l
l
Nozzle
Body
Pipe
Size
Fluid
Orifice
Dia.
BSPT connections require the addition of a “B” prior to the nozzle body
inlet connection.
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F57
Air Atomizing
Nozzles
45265, 45269
Air Atomizing Nozzles
Humidification Spray Nozzles and Units
Features and Benefits
• All equipment supplied for humidification systems except piping
and wiring.
• YMF MiniFogger® III is ideal for humidification applications with
limited space due to its compact design.
– Available with a choice of one to four stainless steel spray
nozzle set-ups with a wide variety of flow-rate sizes/droplet
sizes and types.
• 1/4JH siphon air atomizing nozzles provide automatic, efficient
humidity control with low installation and operating costs.
– Nozzles operate either with compressed air drawing water
from the float box by siphon action, or with water being
delivered to the nozzle under pressure.
– For each spray set-up, water capacity is 0.26 to 1.19 gph
(1.0 to 4.5 l/h), and air capacity is 30 to 35 nl/min at 43.5 psi
(3.0 bar).
– Produces a fine atomized spray for rapid evaporation and
efficient humidification.
– Can be placed in hard-to-reach spaces and can be easily
installed on a header, on a wall or on a ceiling.
– For information on siphon set-ups, see pages F23 to F53.
• 1/4JT pressure-fed air atomizing nozzles provide automatic,
efficient humidity control with low installation and operating
costs.
– 0.46 lbs. (210 g) for single spray set-up type; 0.55 lbs. (250 g)
for multiple four set-up types.
– Height is 4.53" (115 mm).
– Suitable for use in systems where water is under pressure.
– The body, retainer cap, and tank are made of corrosionresistant polypropylene with stainless steel air and water
connections.
– Have built-in strainers for air and water plus a ball check valve
in the water line.
– Materials are also compatible with deionized water.
– Produces a fine atomized spray for rapid evaporation and
efficient humidification.
• 46215-008 provides a finely atomized spray without the use of
compressed air.
– Produces a hollow cone spray pattern.
– For information on pressure set-ups, see pages F5 to F48.
• 45400 humidification unit is a self-contained humidifier suitable
for use with deionized water (DI).
– Easy to install on a wall or for use in non-ducted applications.
– Requires a minimum liquid pressure of 450 psi (31 bar)
to the nozzle.
– Maximum operating pressure of 1000 psi (69 bar).
– Air regulator and gauge, 24VDC air control solenoid and air line
filter are included within the Humidification Unit.
– Wall-mounting bracket is also provided.
– 9.7 lbs. (4.4 kg).
– For each spray set-up, water capacity ranges from 2.7 lbs./hr
at 10 psi (0.7 bar) air to 6.5 lbs./hr at 60 psi (4 bar) air.
1/4JH
45400
YMF
46215-008
Siphon inlet connection
1/4" NPT and BSPT inlets
1/4JT
1/4" NPT or BSPT (F)
MiniFogger III
1/4" NPT or BSPT (F)
air and liquid inlet connection
1/8" NPT or BSPT (F)
misting nozzle
Pressure-fed inlet connection
1/4" NPT and BSPT inlets
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F58
Humidification Spray Nozzles and Units
Optimization Tips
Materials
• See page F2 for optimization tips.
Material
Code
Material
See Also
http://
Nozzle Type
JH
JT 45400 YMF 46215
Nozzle Bodies
– Air pressure regulators
Brass
(none)
– Pressure gauges
Nickel-plated Brass
(none)
– Solenoid valves
Kynar®
KY
303 Stainless Steel
– Liquid pressure regulators
– Strainers
• For 1/4JH siphon air atomizing nozzles, request
Data Sheet 10188
• For 1/4JT pressure-fed air atomizing nozzles, request
Data Sheet 2843
l
l
SS
l
l
Nickel-plated Brass
SSBR
l
l
Nickel-plated Brass Air Cap and
303 Stainless Steel Fluid Cap
SSBR
l
l
l
l
l
Air/Fluid Caps
• For 45400 humidification unit, request Data Sheet 45400
• For YMF MiniFogger® III, request Data Sheet YMF
Performance Data
l
Kynar
KY
303 Stainless Steel
SS
PTFE
TEF
l
l
l
Ordering Info
YMF MiniFogger III
Data per Nozzle (Air Pressure 0.3 MPa)
Orifice
Set-up
Air
Mean
Spray
Diameter Liquid
No.
Capacity Capacity Droplet Size Distance
(mm)
l/h
l/min
(micron)*
(m)
SU2.5N
0.54
2.5
35
8.5
2.7
*Sauter Mean Diameter
0.1 MPa = 1 bar
Humidification
Unit
Spray Set-up
1/4 JH – SS + SU1A –
l
l
l
l
Inlet
Conn.
Nozzle
Body
Material
Code
Spray
Set-up
No.
SS
l
Material
Code
YMF-3 –
l
Humidification
Unit
Type
4
l
No.
of
Set-ups
*Includes retainer and gasket.
45400
46215-008
Atomizing
Air
Complete Nozzle Assembly
Nozzle Body*
Water
Capacity
Air
Press.
bar
Air
Capacity
l/min
l/h
.7
10.7
1.2
1.4
16.1
1.6
2
20.9
2.0
2.8
25.9
2.3
3.5
31.0
2.7
4
36.7
3.0
Pressure
bar
Liquid
Capacity
l/h
BSPT connections require the addition of a “B” prior to
the nozzle body inlet connection.
To order spray set-up only, use spray set-up number
and material code: SU1A-SS.
35
3.6
To order fluid cap only, use fluid cap number (shown in
performance data charts) and material code: 1650-SS.
41
3.8
48
4.2
To order air cap only, use air cap number (shown in
performance data charts) and material code: 64-SS.
55
4.5
62
4.7
69
4.9
Humidification
Unit
45400 –
l
Humidification
Unit
Type
1
l
No.
of
Set-ups
To order spray nozzle without set-up, use inlet
connection, nozzle body and material code: 1/4JH-SS.
Typical humidifying set-ups for siphon nozzles
B
A
A – Float box with float valve
B – TW liquid strainer
C – Air atomizing nozzle
D – Spray pipe assembly
E – Pipe hanger
F – Air filter
G – Pressure regulator with gauge
H – Solenoid valve
I – Switching relay
J – Humidistat
C
I
D
E
J
G
F H
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F59
Air Atomizing
Nozzles
• Accessories
– Air line filters
Air Atomizing Nozzles
Humidification System Components
Features and Benefits
• 2335-SE pipe assembly consists of straight and formed tubing
with fittings, globe valve and split-eyelet connectors.
– Not assembled.
• 11438-85 humidistat will respond to humidity levels in the
range of 20% to 95% RH.
– Maximum operating temperature 125°F (52°C). 24V DC; 110V.
Overall height 6" (15 cm).
• 11438-95 switching relay has built-in transformer that supplies
low-voltage current for humidistat circuit.
– 2-wire 24V control, 115V AC. Maximum temperature 115°F
(46°C).
• 55089 electric humidistat quick relative humidity LCD readouts
from 1% to 99% with repeatability of ±5%.
– Operating temperature range 32°F to 160°F (0°C to 71°C).
– 24V (DC or AC).
• 45604 float valve used in 45600 float box to shut off inlet flow
at a preset water level.
– Made of ABS plastic, 304 Stainless Steel, polypropylene
with fiber washers and a brass nut.
• 55400 valve package is easy to install and use – simply connect
to existing air and fluid lines.
– The NEMA type 4 panel is completely sealed to eliminate moisture
damage to components.
– Safety feature ensures there is no product damage due to
unintentional water release.
– Stainless steel components available for use with deionized water.
– Separate atomizing and cylinder air lines with adjustable delay
time assures liquid atomization.
• 2202 pipe hanger for proper spacing between air and liquid lines.
Sizes fit 1/2" piping.
– Hanger is held by threaded rod and nuts (not included) for
vertical adjustment.
– Made of cast aluminum. 4" (10 cm) spacing.
– Use with 2335-SE spray pipe assembly.
See Also
• Accessories
– Air line filters
Optimization Tips
• See page F2 for optimization tips.
http://
– Pressure gauges
– Air pressure regulators
– Solenoid valves
– Liquid pressure regulators
– Strainers
• Section L, Accessories
• For 2335-SE pipe assembly, request Data Sheet 2335-SE
• For 55089 electrical humidistat, request Data Sheet 55089
2335-SE
Spray pipe assembly
45604
Float valve
11438-85
11438-95
Humidistat
Switching relay
45600
55400
Float box
Valve package
55089
Electric humidistat
2202
Pipe hanger
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F60
Air Atomizing Accessories
Features and Benefits
• 22140 pressure tank assembly meets ASME® Boiler and Pressure
Vessel Code requirements and OSHA safety regulations.
– Constructed of 304 Stainless Steel.
• 39272 tank heater bands provide anywhere from 6°F to 60°F (3°C
to 33°C) heat gain depending upon the tank size and number of
bands used.
– Silicone rubber construction with fiberglass mesh
reinforcement for added strength, flexibility, and corrosion
resistance.
– Assembly includes a pressure regulator with gauge, ASME
coded pressure relief valve, air bleed valve and plug valves
for air inlet and liquid outlet.
– Features quick-release band clasp and built-in thermostat for
temperature control.
– Tanks are available in 1, 2, 5 and 10 gallon (3.8, 7.6, 18.9 and
38 liter) capacities.
– Two sizes fit 9" and 12" (288.6 and 304.8 mm) diameter tanks.
– The air inlet and liquid outlet have 1/4" NPT (F) connections.
• 38673 push-in tube fittings provide fast and easy hook-up of
air atomizing nozzles.
– The maximum working pressure is 140 psi at 100°F (9.5 bar
at 38°C).
– Select from six configurations with 1/8", 1/4" or 3/8" NPT (M)
connections for 1/4", 3/8" and 1/2" O.D. tubing.
• 45592 ferrule-type tube fittings are intended for use when
operating at higher pressures.
– The 316 Stainless Steel is of durable construction and can be
easily taken apart for cleaning.
– Recommended pressure is up to 250 psi (17 bar) for liquid
and air lines.
– Six configurations available with 1/8", 1/4" or 3/8" NPT
connections for 1/4", 3/8" and 1/2" O.D. tubing.
• 38691 and 38692 strong, semi-rigid nylon tubes designed for use
with 38673 fittings.
– Abrasion resistant and dimensionally stable tubing available in
12', 25' and 50' (3.6 m, 7.5 m and 15 m) lengths.
– Fits 1/2", 3/4" or 1" pipe or similar O.D. tube. 1/4" NPT or
BSPT (M) outlet pipe connections.
– Nickel-plated brass with zinc-plated pipe clamps or all
stainless steel construction.
• 39273, 39275 level switch kit indicates a low liquid level condition
inside the pressure tank.
– Use standard 39273 level switch with 5 and 10 gallon (18 and
38 liter) pressure tank assemblies with external 1/4" NPT (F)
threads.
– Maximum working pressure is 250 psi (17 bar) at –40°F to +70°F
(–40°C to +20°C).
– 38691 has 1/4" O.D.
– 38692 has 3/8" O.D.
– Use 39275 level switch with 1 and 2 gallon (4 and 8 liter)
pressure tank assemblies with external 1/4" NPT (F) threads.
– Features a U.L. listed float switch, quick disconnect and 12'
(3 m) PVC jacketed cable.
– Available in brass with Buna-N float or all stainless steel.
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F61
Air Atomizing
Nozzles
– Durable nickel-plated brass construction includes Buna-N
O-ring.
– The 22140 features brass fittings and an EPR lid seal.
• 38180 split-eyelet swivel union simplifies installation and
maintenance of air atomizing nozzles and spray guns.
– Connector design reduces costs by eliminating cutting,
threading, welding and brazing operations and adjustment
of fittings, unions and nipples.
Air Atomizing Nozzles
Air Atomizing Accessories
22140
Pressure tank assembly
38180
Split-eyelet swivel union
39273 and
39275
Level switch kit
38673 and
45592
Tube fittings
39272
Tank heater bands
Optimization Tips
See Also
• See page F2 for optimization tips.
• For 22140 pressure tank assembly, request Data Sheet 22140
http://
• For 38180 split-eyelet swivel union, request Data Sheet 38180
• For 39273, 39275 level switch kit, request Data Sheet 39275 and 39273
• For 39272 tank heater bands, request Data Sheet 39272
• For 38673, request Data Sheet 38673
• For 45592 ferrule-type tube fittings, request Data Sheet 45592
• For 38691 and 38692, request Data Sheets 38691 and 38692
Phone 1(630) 665-5000, FAX 1(630) 260-0842
Visit Our Web Site: www.spray.com, Email: info@spray.com
F62