Adhesives
CHEMICALS
Threadlocker Blue - Nut Type
ND Industries threadlockers are designed to lock and seal threaded fasteners.
They perform better than traditional mechanical devices such as lock
washers because they unitize the entire assembly. This prevents any
loosening from shock and vibration. Threadlockers also alleviate rust-lock
and prevents any leakage. Liquid threadlockers are considered to be the
most effective method of locking and sealing threaded fasteners.
Features:
• Medium strength Threadlocker
• Seals most types of nuts and bolts
allowing disassembly using standard tools
Applications:
No.
73026
Description
Threadlocker Blue Nut Type (50ml)
Qty
1
• Studs and bolts, threaded pipe fittings, locking nuts and bolts larger than 1/4" diameter
Threadlocker Red – Stud Type
Features:
• High strength Threadlocker
• Heat and hand tools required to separate parts
No.
73028
Description
Threadlocker Red Stud Type (50ml)
Qty
1
Applications:
• Studs and bolts, threaded pipe fittings,
locking nuts and bolts larger than 1/4" dia.
Hydraulic/Pneumatic Sealant Brown
Seals and secures metal pipes and fittings by filling the space between threaded
metal parts. Prevents leakage caused by tape shredding, vibration loosening,
solvent evaporation, and damaged threads. Because of the lubricating properties,
ND thread sealants make it easy to assemble fittings and also prevent galling
of the threads. For repairs, parts may be disassembled with basic hand tool.
091708
Features:
•
•
•
•
Provides high pressure seals
Maximum resistance to most solvents
Will not contaminate or clog lines
Use on hydraulic threaded connections
No.
73036
Description
Hydraulic/Pneumatic
Sealant Brown (50ml)
Qty
1
S-1
ND Industries threadlockers are designed to lock and seal threaded
fasteners. They perform better than traditional mechanical devices such as
lock washers because they unitize the entire assembly. This prevents any
loosening from shock and vibration. Threadlockers also alleviate rust-lock
and prevents any leakage. Liquid threadlockers are considered to be the
most effective method of locking and sealing threaded fasteners.
Gasket Maker
Features:
Applications:
•
•
•
•
•
•
•
•
•
•
Single component form in-place gasket
Eliminates inventories of pre-cut gaskets
No shrinking
Fills irregularities and voids in flange surfaces
No.
73034
Description
Gasket Maker (50ml)
Qty
1
S-2
Z-7 Debonder®
Thermostats
Compressors
Pumps
Transmission Housings
Gear Boxes
Axle Covers
Debonding Agent for All Super Glues
Features:
Applications:
• Softens and removes cured
cyanoacrylate adhesives, most other
adhesives, paint, oils, mold release,
printer ink and permanent markers
• Odorless
• Great for unsticking fingers,
softening threadlocking
compounds, removing signs, etc.
No.
70244
Description
Debonder 1 oz. (28.4g)
Qty
1
Pacer® Instant Adhesive HP500
Features:
Technical Information:
• This is an advanced technology,
range extended, gap filling adhesive
• Virtually non-surface sensitive
Viscosity ..................................................500cps
Service Temperature ........... 114 to 180oF
Dielectric Constant ................................ 3.98
Tensile Strength .............................. 4000psi
Color ................................................. Clear Liquid
Meets MIL-A-46050C, Type II, Class 3
Applications:
• Bonds non-porous materials, such as
metal, glass and rubber (O-rings)
• Bonds porous materials such as wood,
veneers, cork, cardboard and leather
No.
70242
Description
Instant Adhesive
1 oz. (28.4g)
Qty
1
Zip Kicker Accelerator
For use with all Super Glues
Features:
Applications:
• Great for tacking wires to
• Promotes instant cure of all
circuit boards and hanging signs
cyanoacrylate adhesives
No.
Description
Qty
• Increases gap fill and allows
70246
Accelerator 2 fl. oz. (57g)
1
fillet forming
• Helps bond strength on hard to glue O-rings
091708
CHEMICALS
Adhesives
Adhesives
Machinable repair compound is a trowelable Ferro-silicone filled polymer
compound for repairing and rebuilding parts and surfaces. Once hardened,
it can be drilled, tapped, sanded, machined and painted just like metal.
No.
70502
70500
Description
Machinable Repair Compound Kit (8 lbs.)
Machinable Repair Compound Kit (2 lbs.)
Qty
1
1
CHEMICALS
Machinable Repair Compound Kit
Seal-Skin Pipe Wrap
Resin-coated, fiberglass cloth designed for rapid repair of ruptured piping
and other patch jobs. It is moisture activated (reacting with or without
water immersion), making it excellent for water or steam line repairs.
Sets up in approximately 30 minutes. It works on PVC, metal, rubber,
fiberglass, plastic and other type materials. Has high adhesive qualities.
Odorless, non-combustible. Can be sanded. Pressure must be shut off.
Description
Seal-Skin Pipe Wrap (2 in. x 5 ft.)
Seal-Skin Pipe Wrap (4 in. x 15 ft.)
Qty
1
1
Ceramic Polymer Repair Kit
Brushable Ceramic is a two-component, brushable, 100% solids (solvent free) high tech
polymer formula, combined with diamond-hard ceramic fillers that provide an exceptionally
tough surface for wear and corrosion areas. Kits contain two colors (pink and blue) so that
by alternating layers, you can more easily gauge wear. ML406 Ceramic Polymer Repair Kit
contains: 8 - 1 lb. units (4 blue, 4 pink), release agent, brushes, gloves,
degreaser, instructions, etc. ML400-2 Ceramic Polymer Repair Kit contains
2 - 1 lb. units, brushes and instructions.
No.
70506
70504
Description
Ceramic Polymer Repair Kit (8 lbs.)
Ceramic Polymer Repair Kit (2 lbs.)
Qty
1
1
091708
The Pipe Tourniquet
No.
70212
A unique product designed for immediate sealing of leaks of all types of
pipes, without prior surface preparation. The Pipe Tourniquet creates
such a superb seal that it is not necessary to reduce pressure in the pipe
to effect the repair, and is generally applied within one (1) minute. For use
in conjunction with epoxy repair products, it also increases corrosion
resistance by placing a barrier between the product and the
Description
repair compound. Can be used with ML450 to complete repairs.
Pipe Tourniquet
S-3
No.
70238
70240
CHEMICALS
Adhesives
E-6000 Self-Leveling Adhesive
An indispensable maintenance tool, E-6000 allows the kind of permanent
repair and maintenance of equipment that may have been too expensive
or difficult in the past. E-6000 provides adhesion strength and versatility not found in silicones and rubber cements. Its strength in adhering
metals, glass, rubber and plastics makes it a universal vehicle maintenance and repair solution. Also, because it’s self-leveling, E-6000 may
be used as potting material in electrical and computer applications.
No.
70252
70253
• Exceptional adhesion to wood, metal, glass, fiberglass, ceramics,
masonry and concrete. (Not for use on styrofoam)
• Adheres strong to leather, rubber, vinyl and many plastics
• Abrasion-resistant
• Maintains its flexible bond in cold temperatures and may be used
to bond items subject to vibration
• The clear E-6000 is not
Description
Qty
formulated for exposure to
E-6000 Self-Leveling Adhesive (3 oz. Tube)
1
sunlight – for these applications,
E-6000 Self-Leveling Adhesive (10.2 oz. Cartridge) 1
paint over after it has cured
Slip-Not
A 100% solids, solvent-free self-leveling epoxy floor surfacing compound
which, when topped with an aggregate, provides a chemical resistant,
durable, nonslip surface. It has excellent adhesion to concrete, steel and
wood, while the solvent-free formulation avoids any present or future
restrictions on VOC content and minimizes worker hazards during
application. Slip-Not comes with Gripper Granules
No.
Description
(No. ML811-1) which are ideal for heavy wear
70400
Slip-Not (1 Quart w/aggregate)
areas, forklift lanes, loading ramps, etc.
70402
Slip-Not (1 Gallon w/aggregate)
Qty
1
1
Metalink Concrete Patch
A 100% solid epoxy compound used with a dry, salt-free sand for
repairing cracked or spalled concrete floors, pump pedestals, curbs,
and areas of heavy wear such as thresholds or loading ramps. Concrete
Patch is approved by the USDA for incidental food contact in federally
inspected meat and poultry plants. It provides excellent abrasion and impact resistance as
well as good chemical resistance. This product contains no volatiles. More than just a
surface coating, it applies easily and actually bonds concrete together. Metalink Concrete
Patch #10 (No. ML820-10) contains 10 lbs. total
No.
Description
Qty
of resin, hardener and sand. Metalink Concrete
70410
Metalink Concrete Patch (10 lb.)
1
Patch #40 (No. ML820-40) contains 40 lbs.
70412
Metalink Concrete Patch (40 lb.)
1
total of resin, hardener and sand.
091708
S-4
Features:
Adhesives
A 100% solids, solvent-free epoxy compound designed for use under
Concrete Patch and Slip-Not. It has been formulated to provide deep
penetration into the surface without the use of solvent, thus eliminating
any objectionable solvent odor, particularly inside buildings or around food
processing or storage areas. It fills small voids and hairline cracks, and
helps seal air entrained concrete to prevent “out gassing” Concrete
Primer/Sealer, as the name implies, is also a stand alone concrete sealer
which can be applied in one or two coats to provide a tough, durable, hard
film which prevents dusting and deterioration
No.
Description
Qty
of concrete surfaces and the effects of water,
70408
Concrete Primer/Sealer (Gallon)
1
chemicals, or freeze/thaw cycles. This product
can be applied to damp or moist surfaces without affect to performance.
CHEMICALS
Concrete Primer/Sealer
Top-Coat Floor Coating
Technical Information:
Cure Time ................. Ready for light traffic: 4-5 hours
..................................................... Heavy traffic: 18-24 hours
Coverage ......... 1 gallon will cover 145 sq ft @ 10 mils
Color .................................................. Colored by special order
No.
70404
Description
Top-Coat Floor Coating
(1 Gallon w/aggregate)
Qty
1
WARNING: This product is a potential skin sensitizer. May cause
injury to eyes and skin following prolonged or repeated contact.
Inhalation of vapor may cause respiratory tract irritation. Use
adequate ventilation when applying to avoid inhalation of vapor.
Prevent contact with eyes and skin. Read and understand MSDS
sheet. We can accept no responsibility or liability for lack of results
because the storage, handling and application of the compound are
beyond our control.
Spray Adhesive
091708
Fast setting, waterproof adhesive for permanent or temporary bonds.
Works on most any surface where an adhesive is needed.
Features:
Applications:
• New formula complies with federal
regulations regarding environmentally
safe components
• Versatile – bonds similar or dissimilar
materials to each other
• Trim adhesive, gasket
adhesive, sanding disc
adhesive, mold adhesive
No.
74130
Description
Spray Adhesive
Qty
1
S-5
Made to provide a tough, corrosion resistant sheathing for
metal or concrete surfaces. Top Coat is approved by the USDA
for use in food processing plants. Contains no volatiles and
applies very easily.
CHEMICALS
Adhesives
SteelStick
For Steel Hard Repairs
SteelStick Epoxy Putty Stick is a hand-kneadable, fast-setting, industrial-strength, steel-reinforced
polymer compound for permanent repairs to anything made of steel or other metals. This metal
repair epoxy putty comes in a handy “Tootsie-roll®” form with the curing agent
encapsulated in the contrasting color base material.
No.
Features:
Description
70214
• Will not shrink or rust
• Putty-like consistency eliminates drips
and runs for a “no mess” application
• No tools required for use
• One hour after application can be drilled,
sawed, sanded, filed, tapped, machined, & painted
• Certified to Standard 61 by The National Sanitation
Foundation for use in contact with drinking water
SteelStick 6" x 3/4"
Qty
1
Applications:
•
•
•
•
•
•
Rebuild small engine parts
Fill cracks and voids in metals
Rebuild rust damage
Fill dents in motorcycle and auto bodies
Repair stripped threads
Anchor machines • Fashion handles
CopperStick
CopperStick Epoxy Putty Stick is a hand-kneadable, fast-setting, copper-reinforced polymer compound for permanent repairs to copper, brass, bronze and other non-ferrous metals. It also bonds to
wood, glass, masonry and many plastics. It comes in a handy “Tootsie-roll®” form with the curing
agent encapsulated in the contrasting color base material.
Applications:
Features:
• Bonds to damp and slowly leaking surfaces
• Putty-like consistency eliminates drips and runs for
a “no mess” application
• No tools required for use
• One hour after application can be drilled, sawed,
sanded, filed, tapped, machined, and painted
• Certified to Standard 61 by The National Sanitation
Foundation for use in contact with drinking water
• Conforms to ASTM D-4236
WoodStick
• Repair leaks in household water
lines within minutes
• Fix freeze breaks in 15 minutes
• Seal pipes, elbows, joints, sleeves,
traps and drains
• Join and seal copper rain gutters
and downspouts
No.
70216
Description
Qty
CopperStick 6" x 3/4"
1
For Wood Repairs
WoodStick Epoxy Putty Stick is a hand-kneadable, fast-setting polymer compound for permanent
repairs to wood. It also bonds to metal, glass, masonry and many plastics. Comes in a handy “Tootsieroll®” form with the curing agent encapsulated in the contrasting color base material.
Features:
•
•
•
•
Will not shrink or pull away
Cured hardness and density are similar to that of wood
Can be stained to match color of wood
Putty-like consistency eliminates drips and runs
for a “no mess” application.
• No tools required for use
• One hour after application can be drilled, sawed,
sanded, filed, tapped, machined, and painted
• Conforms to ASTM D-4236
Applications:
• Fill scratches, gouges, cracks, dry
rot, insect damage and knotholes
• Repair furniture, molding and frames
• Reshape woodcarvings
• Mold wood knobs and handles
• Can be sculpted or carved for intricate
detail on hobbies and crafts
No.
70218
Description
WoodStick 6" x 3/4"
Qty
1
091708
S-6
For Copper, Brass and Bronze Repairs
Adhesives
Permanently repairs wet areas and underwater surfaces
AquaStick Epoxy Putty Stick is a hand-kneadable, fast-setting, fiberglass-reinforced polymer
compound for permanent repairs to many surfaces including fiberglass, concrete, glass, ceramics, metals, wood, and many plastics. This underwater repair epoxy putty comes in a handy
“Tootsie-roll®” form with the curing agent encapsulated in the contrasting color base material.
Features:
Applications:
• Can be applied under water
• Putty-like consistency eliminates drips
and runs for a “no mess” application
• No tools required for use
• One hour after application can be drilled,
sawed, sanded, filed, tapped, machined
and painted
• Repair cracks in spas, hot tubs, pools, etc.
• Patch dings, scratches, cuts and gouges in fiberglass, metal and wooden boat decks and hulls
• Rebuild body damage to surfboards, jet skis
and other marine recreational equipment
• Seal leaks in water tanks
• Form custom gaskets
• Repair loose or cracked wall or floor tiles
No.
70220
Description
Qty
AquaStick 6" x 3/4"
1
S-7
R.T.V. Gasket Maker & Sealer
Tough silicone adhesive adheres to and bonds natural and synthetic fibers, glass, metal,
wood, other silicone rubber, hard-to-stick-to plastics, masonry products, etc. Numerous
maintenance applications: seals against water, air, chemicals, oils and grease. Fills crevices
and irregularities in joints. Waterproofs porous materials and perfect for weather stripping.
Insulates against shock and vibration and is a great electrical insulator. A perfect gasket
maker for just about anything.
Applications:
• Gasketing pumps, oil pans, valve covers, gear boxes and compressors
• Seals windows, pipe joints, parts, bonds gaskets, appliance parts,
sign letters, caulks joints, duct work, equipment housings
2.8 oz. Tube:
No. 74226 White
No. 74227 Black
No. 74225 Clear
No. 74229 Blue
No. 74228 Aluminum
091708
CHEMICALS
AquaStick
Tack-free in just 5 minutes and cure
time at 1/8" thickness is just 24 hours
10.3 oz. Caulking Tube:
No. 74211 White
No. 74212 Black
No. 74210 Clear
No. 74214 Blue
No. 74213 Aluminum
8 oz. Can:
No. 74128
No. 74131
No. 74133
No. 74153
No. 74631
No. 74632
No. 74633
No. 74634
White
Black
Clear
Hi-Temp Red
Blue
School Bus Yellow
Aluminum
NC Blue
CHEMICALS
Adhesives
Hi-Temp Red Gasket Maker & Sealer
With Pressure Can Application
R.T.V. Gasket Maker & Sealer is a single component room temperature
vulcanizing silicone rubber. R.T.V. will adhere to clean metal, glass, most types
of wood, silicone resin, vulcanized silicone rubber, ceramic, natural and
synthetic fiber as well as painted and many plastic surfaces. Long life
expectancy in excess of ten years.
Tack-free in just 5 minutes and cure time at 1/8" thickness is just 24 hours
No.
74231
74153
74221
Description
Hi-Temp Red Gasket Maker & Sealer (3 oz. Tube)
Hi-Temp Red Gasket Maker & Sealer (8 oz. Pressurized Can)
Hi-Temp Red Gasket Maker & Sealer (10.3 oz. Caulking Tube)
Qty
1
1
1
R.T.V. Gasket Maker NC Blue
S-8
With Pressure Can Application
This blue R.T.V. silicone-adhesive can be used on metal, glass, ceramics,
wood, rubber and most plastics. Low odor for oxy sensors.
Not recommended for use on: Cylinder heads, exhaust manifolds,
intake manifolds, carburetors or continuous immersion in gasoline.
Forms In-place Gaskets for:
• Oil and transmission pans
• Oil and water pumps
• Valve and timing chain covers
No.
74631NC
Description
RTV Gasket Maker NC Blue (7.25 oz.)
Fusion-Weld
TM
Qty
1
• Electric motors and electrical
control boxes
• Gear boxes
• Compressors
• Machine covers
Instant Cold Bond Adhesive
Fusion-WeldTM is an advanced polymer adhesive that can quickly,
sometimes instantly, bond most materials including rubber, glass, copper,
aluminum, steel, and most plastics to themselves or another material.
The welding powder is a complementary formulation that enables even
stronger bonds, and can repair holes, cracks, and gaps. Produces a
strong weld seam to support the repair, just like solder or welded joints.
• High strength bond in seconds
• Instantly bonds most surfaces
• Can be filed, drilled and painted
No.
70825
Description
Fusion-WeldTM Kit
Qty
1
070110
Features:
Adhesives
This is a 5 minute fast-curing 2-part epoxy packaged in a convenient syringe
for easy dispensing and mixing. It is used for the fast bonding of wood,
fiberglass, metal, glass, masonry, ceramics and some plastics. It sets in
approximately 4 to 7 minutes and is virtually unaffected by gasoline, oil,
grease, hydrochloric and sulfuric acids and water. It dries to a clear finish
and does a great job on fiberglass.
No.
70234
70232*
Description
“Clear” 2-Part Fast Cure Adhesive
“Clear” 2-Part Fast Cure Adhesive Gun Refill (50ml)
Qty
1
1
CHEMICALS
“Clear” 2-Part Fast Cure Adhesive
*Use with Sur-Shot
Dispensing Gun
No. 70552
“FAS-STEEL 4”
2-Part Steel-Filled Epoxy
With Sur-Shot Syringe
No.
70228*
Description
“FAS-STEEL 4” 2-Part Steel-Filled Epoxy Gun Refill (50ml)
Qty
1
*Use with Sur-Shot
Dispensing Gun No. 70552
“Shur-Shot” Fire Foam
A two-part medium density silicone elastomer designed for use as a fire,
smoke, noxious gas and water sealant. It applies as a liquid, which when
properly mixed, expands approximately 3:1 and forms a compression seal
within one to five minutes. Provides up to a 3-hour fire rating. UL listed.
Shur-Shot Fire Foam can be used partial with change of mixers.
No.
70236*
Description
“Shur-Shot” Fire Foam Gun Refill (50ml)
Rev. 041311
“Shur-Shot”
Dispensing Gun
No.
70552
70554
Description
“Shur-Shot” Dispensing Gun
“Shur-Shot” Dispensing Gun Static Mixer
Qty
1
1
Qty
1
*Use with Sur-Shot
Dispensing Gun No. 70552
S-9
A unique two-part 100% solids epoxy resin system filled with steel powder.
With the SHUR-SHOT application system, mixing, and application is fast and
easy. Once hardened, FAS-STEEL 4 may be machined, drilled, tapped and
painted. Ideal for fast, low-cost repairs to most metals.
Red Hot Cinnamon
Odor Neutralizer
Finely atomized, micro-mist air freshener provides complete
deodorization of malodors in the air, on surfaces and on fabrics.
Features:
Applications:
•
•
•
•
• Locker rooms, smoking areas,
nursing homes, cars, hospitals,
boats, carpets, upholstery,
draperies
Non-chlorinated
V.O.C. compliant
Chemically neutralizes malodors
Dry spray particles
No.
74155
Description
Red Hot Cinnamon Odor Neutralizer 14 oz. (396g)
Qty
1
Orange Cream
Long Lasting Odor Control
S-10
Finley atomized, micro-mist air freshener provides complete
deodorization of malodors in the air, on surfaces and on fabrics.
Features:
Applications:
•
•
•
•
• Locker rooms, smoking
areas, nursing homes, cars,
hospitals, boats, carpets,
upholstery, draperies
Non-chlorinated
V.O.C. compliant
Chemically neutralizes malodors
Dry spray particles
No.
74150
Description
Orange Cream Odor Control 14 oz. (396g)
Qty
1
Super Cherry Odor Control
Features:
•
•
•
•
Silica Free, can be burned (less waste in landfill), biodegradable, long lasting
Large size will not blow away, use indoor/outdoor
Quickly absorbs oil, liquid spills, urine, blood
Covers large areas of landfills, forms an odor eliminating blanket
Applications:
• Odor control, spill control
• Sprinkle into empty garbage receptacles, large or small, and add additional
amount of granules for the large
receptacles outside restaurants, motels,
No.
Description
hotels, cafeterias, etc.
71214
Super Cherry Odor Control (1 lb.)
• Deodorizes refuse/garbage trucks, drain
71212
Super Cherry Odor Control (60 lbs.)
beds, leaching fields, waste dumps,
71206
Super Cherry Odor Control (100 lbs)
locker rooms, kennels, sewer manholes
Qty
12
1
1
091708 Rev. 072011
CHEMICALS
Air Fresheners
Air Fresheners
CHEMICALS
Enzo Magic
Enzyme Active Stain & Odor Eliminator with d-Limonene
Enzo Magic is a concentrated blend of enzymes and d-limonene designed to break
down organic stains and odors caused by blood, urine, feces, vomit, grass stains,
milk, ketchup, baby food and most other foods.
NOTE: This product was specifically designed to remove stains and spots from
carpets. Use on any other type of material such as upholstery fabric, curtains or
clothing will NOT be warranted by the manufacturer.
Features:
Applications:
• Eliminates reoccurring odors by
eliminating their source
• Can be used alone or in conjunction with
other cleaners to achieve superior results
• Leaves behind a pleasant citrus fragrance
• Animal shelters, apartments,
offices, athletic facilities, schools,
nursing homes, hospitals, hotels/motels
Description
Qty
Enzo Magic 18 oz. (510g)
1
Odor Neutralizing Fogger
Finley atomized, micro-mist air freshener provides complete deodorization
of malodors in the air, on surfaces and on fabrics.
Features:
•
•
•
•
Applications:
Non-chlorinated
• Locker rooms, smoking areas, nursing
V.O.C. compliant
homes, cars, hospitals, boats, carpets,
Chemically neutralizes malodors
upholstery, draperies
Dry spray particles
No.
74139
Description
Smell-Eaze (6.75 oz.)
Coatings & Paints
D-Rust
TM
Rust Conversion Coating
D-Rust is a one-step rust converter that chemically neutralizes rust on metal
suraces. It eliminates the need for scraping, brushing or sandblasting prior to
painting. The aerosol can applicator allows for easy, mess free application.
090110
Features:
Applications:
• Eliminates Rust • Stops Corrosion
• Railings, fences/gates, bridges,
• Seals and converts to paintable surface
towers, vehicles, marine equipment,
structures, metal roofs, guard rails,
No.
Description
Qty
farm tools and any other rusted
74175 D-Rust Conversion Coating 11 oz. (312g) 1
surface
Qty
1
S-11
Smell-Eaze
No.
74145
CHEMICALS
Coatings & Paints
Belt Dressing
Features:
• Specially formulated to prevent belt slippage, stop squeals, and increase
power transmission
• Does not contain rosin or asphalt – thereby preventing belt attack and
increasing belt life and preventing dry rot
• Built in protectorants help repel dirt and protect belts from becoming
recontaminated with dust and dirt
• Revitalizes belts for longer life
No.
Description
Qty
• Regular use adds life and increases
74117
Belt Dressing 12 oz. (340g)
1
efficiency
Applications:
• Ideal for rubber, canvas, industrial, automotive and other V-belts
S-12
Cold Zinc Galvanizing
Features:
• Cold zinc galvanizing is a pure zinc spray coating scientifically
compounded for complete metal protection. When sprayed on metal,
the zinc and metal fuse forming a lasting protective shield.
• Prevents rust and corrosion. Checks corrosion on previously coated
damaged surfaces
No.
Description
Qty
• 90% pure zinc dust – air dries
74112
Cold
Zinc
Galvanizing
14
oz.
(396g)
1
in 10 to 15 minutes
• Immediate total protection for
bare metals – anywhere metal is subjected to corrosion
• Resistant to salt, corrosion, and water
• An excellent primer for interior or exterior
• Rustproofs welds
Restore
Rust Converter & Protective Coating
Features:
•
•
•
•
Converts rust to protective long lasting coating
Keeps machinery in service longer
Non-toxic
No.
Description
Can be painted over
74501
Restore (1 Quart)
Qty
12
091708 Rev. 072011
This product eliminates rust by performing two operations at one time.
First, rust is converted to a black organic complex, then a clear acrylic
coating is formed. Restore can virtually be used on all rusted surfaces,
including machinery, equipment, metal buildings, tools, cars and boats.
Coatings & Paints
Acrylic Enamel Paints
Rust Tough® Aerosols are a rust-preventative acrylic alkyd enamel that offers state-ofthe-art corrosion protection. Rust Tough™ provides excellent gloss and color retention,
superior durability and one-coat coverage.
Applications:
Features:
Steel, storage tanks, bar
• Complete coverage with one coat
joists, handrails, piping, pipe
• Dries to touch in 25 minutes; dries to handle in 1 hour
racks, conveyors, ladders,
• Superior appearance and color retention
fencing, machinery, metal
• Ideal for small touch-up jobs, painting irregular shapes
doors and marine applications
or covering hard-to-reach areas
above boot topping. Note: Not
• For both indoor and outdoor use
recommended for immersion.
• Tough, high gloss finish resists chipping and peeling
• Acrylic enamels and primers are equipped with EZ TOUCH® FANSPRAY® Nozzle
• Modified acrylic enamel formulation
CHEMICALS
MRO Rust Tough® Paints
AVAILABLE IN 15 COLORS
72214
Aluminum
72238 Flat Black
72216
72218
72224 Dark Machine Gray
Gloss White
Flat White
72236 Light Gray Primer
72226 Light Machine Gray
72212
72244 Bright Green
Red Oxide Primer
72232 Safety Blue (OSHA)
72246 Equipment Orange
72230 Safety Red (OSHA)
72248 Safety Orange (OSHA)
72250 Safety Green (OSHA)
Industrial Guard Enamel - Gloss Black
TM
A superior, lead-free industrial coating formulated for maintenance operations
where maximum performance is required. This paint will not run or sag and
provides twice the coverage of conventional aerosol enamels. For best results,
always use our Red Oxide or Light Gray Primers prior to applying color coat.
Features:
070110
• Protects against rust, weather, oil,
gasoline and most corrosive chemicals
• Single coat hiding
• Resists abrasion and heat
• Withstands high humidity
No.
72220
Description
Industrial Guard Enamel –
16 oz. (454g)
Applications:
• Wood and metal, Home, Automotive, Industrial, Marine, and Construction
Qty
1
S-13
72228 Safety Yellow (OSHA)
CHEMICALS
Coatings & Paints
Undercoat
Rubberized
An extremely durable rust and corrosion inhibitor. A premium
asphalt based rubberized undercoating that seals out moisture and
deadens sounds. Resists chipping and will not crack or peel with age.
Features:
•
•
•
•
Prevents rust
Deadens sound
Waterproof, elastic
Will not crack
No.
74146
Description
Qty
Undercoat 16 oz. (453g)
1
Valve Action Paint Marker
• Lead free paint formulated for industrial applications
• Dries in minutes, weather-resistant markers
• Ideal for all surfaces: metal, glass, wood,
rubber, plastic, cardboard and paper
• Valve action fiber tip is replaceable to assure full
use of marker
• Makes fine line marks
• Marking range: -50oF to 150oF
Applications:
No.
70630
70632
70634
70636
70638
70640
70642
70644
Description
Qty
Paint Marker - White
1
Paint Marker - Yellow
1
Paint Marker - Red
1
Paint Marker - Black
1
Paint Marker - Orange
1
Paint Marker - Blue
1
Paint Marker - Green
1
Paint Marker - Aluminum
1
• Metal and PVC pipe, sheet metal, cartons, lumber, signs and tires
General Cleaning
Microfiber Towels
Strong and super soft, these durable and machine washable microfiber towels provide
superior cleaning properties. Traps more dirt and dust than any other towel. Use wet or dry
– absorbs up to 7 times its weight.
Features:
•
•
•
•
•
•
Applications:
• Perfect for any surface
80% polyester / 20% polyamide
including glass and mirror
Non-abrasive
Scratch and streak-free glass cleaning
Lint free and lightweight
Cleans without the use of chemicals
Environmentally friendly
No.
70020
Description
Microfiber Towels – Blue 16" x 16"
Qty
12
100109
S-14
Features:
General Cleaning
CHEMICALS
“No Limits”
Multi-Purpose Wipers
Features:
•
•
•
•
Thick, white DRC premium grade cloth-like all-purpose wipers
Absorbs grease, oil, chemicals, inks, etc.
Comes in a convenient and economical pop-up dispenser
100 white 12" x 10-1/2" wipers per box
No.
70004
Description
Qty
“No Limits” Multi-Purpose Wipers (100 ct.)
Clear Shine
1
Non-Ammoniated
Features:
•
•
•
•
No.
74120
Description
Clear Shine 19 oz. (539g)
Streak and haze free
Removes nicotine and insect residue
Fresh, clean fragrance
Safe on window tinting film, plastics and acrylics
Qty
1
Applications:
.
• Hospitals, nursing homes, schools, restaurants, hotels, office buildings,
municipal buildings, marine aircraft and recreational vehicle trades
Insta-Clean
Rubber & Vinyl Cleaner/Protectant
Insta-Clean cleans and shines all rubber, vinyl and other synthetic surfaces
without washing or wiping. Just spray and walk away!
091708
Features:
Applications:
• Ideal for use on rubber and vinyl
• Powerful foaming action
components of machinery/
• Amazing foaming action cleans and
equipment, vinyl and plastic
shines without washing or wiping
furniture, auto/truck tires . . .
• Leaves a high gloss protective shine
makes them look showroom new!
• Repels dirt, salt and road grime
• Protects from discoloration and
oxidation
No.
Description
• Will not harm aluminum or painted surfaces
74121
Insta-Clean 13 oz. (369g)
• Easy to use, can be used when surface is
wet or dry
Qty
1
S-15
Clear Shine is a light foam cleaner which can be used on glass and many
other surfaces. Will not streak, haze or smear. Excellent for commercial
and institutional glass and hard surface cleaning.
NOTE: Do not use on hot surfaces.
CHEMMICALS
General Cleaning
Graffiti Gone – Vanish
Graffiti Gone is a heavy duty, solvent based cleaner expressly formulated
to quickly remove marks of vandalism and graffitti from almost any
surface. Graffiti Gone removes spray paints, ink, and grease pencil streaks.
Features:
• A superior graffitti and vandalism mark remover
• Fast working – leaves a clean, renewed surface
• Activated formulation dissolves spray paints, ink, crayon, etc.
Applications:
No.
Description
Qty
• Safe on glass, brick, marble,
74122
Graffiti Gone 15 oz. (425g)
1
concrete, tile, formica and metals
• A necessity for hospitals, industrial and public buildings, shopping malls, buses, trains, etc.
S-16
Multi-Purpose Towels
Features:
• Waterless cleaner that cuts through tar, grease, wax, ink, paint,
lubricants and adhesives
• These aggressive, citrus scented towels are industrial strength
but also gentle
• Perfect product when you don’t have access to soap and water
• Won’t leave an annoying residue
• 9.5 x 12” towels
Applications:
No.
71080
71082
Description
Multi-Purpose Towels (70 ct.)
Multi-Purpose Towels (20 ct.)
Qty
1
1
• Use them for almost every job from loosening
and dissolving tough grime off of stainless
tools to wiping up oily spills
Hand Sanitizing Towels
Hand Sanitizing Towels immediately eliminate harmful micro-organisms
from skin. Sanitizing towels eliminate several disease causing germs and
bacteria including Pseudomonas aeruginosa, Staphylocuccus aureas,
Escherichia coli, Streptococcus pyogenes and Salmonelly choleraesuis.
No.
71084
Description
Hand Sanitizing Towels (70 ct.)
Qty
1
092208
Unlike runny alcohol gels, Sanitizing Towels aren't messy.
Just tear, wipe and throw away. Plus, our special formula conditions skin
and leaves a wintergreen fragrance as it sanitizes.
General Cleaning
Hospital Sanitizer, Disinfectant and Deodorant
Result is a hospital grade disinfectant and deodorant that kills TB
(Tubercule Bacilli), E. Coli, Herpes Simplex Types 1 and 2, Salmonella
Choleraesuias, Staphylococcus, and more. EPA Registration #44446-67
Features:
•
•
•
•
•
CHEMICALS
Result
Germicidal kills Staph, E. Coli, and Tuberculosis
Virucidal against HIV-1 (AIDS virus), Herpes Simplex 1 and 2 and more
Powerful – combines germ killing ingredients
Destroys mildew and musty odors at their source
Sanitizes and disinfects
Applications:
No.
Citra-Blast AC
Foaming Degreaser-Cleaner
Penetrates and lifts hard to remove grease and soil. This product is an
amazing dextro-limonene all natural citrus extract. It is a multipurpose,
aerosol foaming degreaser/deodorizer designed for food service.
Features:
092208 Rev. 062811
• Effective for emulsifying vegetable oil and animal fats
• Used in industrial/automotive areas for
heavy-duty degreasing
No.
Description
• This product can be used safely with
74115
Citra-Blast AC 18 oz. (510g)
minimal protective equipment
Qty
1
S-17
74109
• For use on telephones, toilet seats, urinals, sinks, showers,
refuse cans, office equipment
• Used by prisons, police/fire departments, hotels/motels, funeral
service/crematoriums, dairy farms, physicians office,
Description
Qty
nursing homes, sports/recreational clubs, beauty
Result (16.5 oz.)
1
shops, food processing plants and veterinary clinics
CHEMICALS
General Cleaning
Quicker Clean
All-Purpose Foam Cleaner
Penetrates quickly to emulsify and dissolve dirt and soap scum. Excellent
for cleaning tile and whitening grout. Thick foam clings to smooth vertical
surfaces.
Features:
• Powerful activated foaming agents cling to and penetrate dirt,
grease and stains on vertical surfaces
Applications:
• Cleans lipstick, dirt, grease pencil
marks, hand prints and other
grime from surfaces.
No.
74105
Description
Quicker Clean 18 oz. (510g)
Qty
1
Total Solutions Conquer TBD
Tuberculocidal • Disinfectant • Cleaner • Deodorizer
Features:
• One-step, ready-to-use cleaner and disinfectant
• Eliminates Staph, Salmonella, Pseudomonas, Athlete's foot fungus,
HIV, TB and Canine Parvovirus
• Prevents the formation of mold and mildew while providing a
pleasant, clean scent
No.
Description
• Also effective against MRSA,
71156
Total SolutionsTM
VISA and VRE
Conquer TBD (1 Quart)
• DOES NOT INCLUDE SPRAY NOZZLE
Qty
12
EPA Registration #1839-83-68562
RTU Orange Natural
Degreaser • Deodorizer • Dissolver
A super strength product that derives its power from 100% of the solvents
extracted from orange peels. It is the natural answer to degreasing, drain
and grease cleaning and maintenance
and odor problems. DOES NOT
No.
Description
Qty
INCLUDE SPRAY NOZZLE.
71252
RTU Orange Natural (1 Quart)
4
Applications:
71253
RTU Orange Natural (1 Gallon)
1
• Used in sewage plants, service stations, garage trucks, automotive plants,
theaters, kitchens, rest rooms, schools, restaurants, office buildings,
apartments, nursing homes, hospitals, commissaries
• Used to clean and deodorize, remove dirt and grime, cleaning machinery
parts, hot and cold tank degreasing, clean hard surfaces
092208 Rev. 072011
S-18
TM
General Cleaning
CHEMICALS
Non-Acid Bowl Cleaner
Maintains all bathroom surfaces
A carefully compounded combination of selected chemical cleaners and
emulsifiers for use as a safe and efficient cleaner for bathroom surfaces.
Cleans by chemical action without the aid of harsh abrasives or acids.
Gives maximum penetration. Comes with directional cap.
Features:
Applications:
• Effective against dirt, grease, soap scum,
discoloration and hard water stains
• Recommended for toilet bowls,
shower stalls, bathrooms,
locker rooms and kitchen walls
No.
71244
Description
Qty
Non-Acid Bowl Cleaner (1 Quart)
12
Citrus Drain Degreaser
Revitalizes sluggish disposal systems without affecting bacterial activity.
Effectively controls odor. Will not harm metal pipes. Degreases equipment,
machinery and other metal surfaces effectively. Do not use on PVC pipe.
Features:
Applications:
• Environmentally safe
• Unclogs, deodorizes and degreases
• Extremely effective in drains, grease traps,
septic systems, dry wells and cesspools
• Effective in sewage
treatment plants,
landfills, waste disposal
facilities and for the
maintenance of drains,
refuse trucks and cans,
garbage areas
No.
71240
Description
Qty
Citrus Drain Degreaser (1 Pint)
12
Alkaline Drain Line Opener
Professional Strength
092208 Rev. 072011
Provides extra clog busting power to open most stubborn clogs fast and
easy — even through standing water. Safe for plumbing fixtures, plastic pipes,
grease traps, septic tanks and cesspools.
Features:
• Dissolves hair, grease, rags, food,
soap scum and coffee grounds
• Clears tough clogs fast
No.
• Safe for plumbing fixtures,
71203
plastic pipes, and grease traps
71204
Applications:
• Ideal for use on showers, tubs,
grease traps, and sinks
Description
Alkaline Drain Line Opener (1 Gallon)
Alkaline Drain Line Opener (5 Gallon)
Qty
4
1
S-19
A powerful citrus based, biodegradable cleaner
CHEMICALS
General Cleaning
Maintain Drain Opener
TM
MaintainTM Industrial Drain Opener will not harm disposals, pipes or
porcelain as it loosens grease and organic matter. MaintainTM contains
no phosphates. Alkaline based drain opener is L1 rated.
Applications:
• Ideal for drains, garbage disposals and other drain clog
maintenance needs
No.
71224
Description
Qty
MaintainTM Drain Opener (1 Quart)
High PSI
12
TM
Aerosol Duster
S-20
High PSI’s moisture-free gas instantly removes microscopic dirt, dust, lint,
iron oxide deposits and paper that normal hand dusting cannot reach.
Attach extensive tube to reach remote cracks and crevices. Plastic safe,
non-abrasive and leaves no residue. Safe on sensitive components and
most finishes. DO NOT USE ON CAMERA MIRRORS.
Features:
• Compressed Gas Duster – allows for non-contact cleaning of
delicate surfaces
• High Press Product – provides superior power for blasting dirt
and dust away
• User Friendly Trigger – gives user comfort and precise control
• Precision Extension Tube – permits cleaning
access to inaccessible areas
• High Purity Formulation – leaves no residue
Skin Guard
No.
74147
Description
High PSITM Duster 10 oz. (284g)
Qty
1
Protective Hand Barrier Cream
• Water Based – ready-to-use protective skin coating in convenient aerosol
form
• Protects Exposed Skin from Irritation – when working with acids, alkalis,
solvents, gasoline, other chemicals and corrosive salts
• Forms a Barrier – prevents grease, soil and ink from penetrating the skin’s
pores and creases
No.
Description
Qty
• Keeps Skin Cleaner – minimizing
74180
Skin
Guard
18
oz.
(510g)
1
clean up time
060509 Rev. 072011
Features:
Industrial Cleaning
Features:
• Improved Color Indicator – detects corrosion
• Low Odor – non-flammable water soluble
formula
• Contains Special Cleaners – attacks and
destroys corrosion and protects after cleaning
• Extends Battery Life – Seals air and dirt out
to protect battery against corrosion buildup
and battery voltage leakage
No.
74106
Description
• Works Quickly – one product
both cleans and protects
• No mess application
• Not necessary to remove
battery
• Authorized by USDA
Qty
Battery Cleaner & Protector 18 oz. (510g)
1
Brake Cleaner NC
Non-Chlorinated
Features:
Applications:
•
•
•
•
• Instantly degreases and leaves no
residue on brake linings, drums,
springs, cylinders, disc brake pads,
CV joints, etc.
Powerful solvent
Instantly degreases
Dissolves oils and contaminants
Leaves no residue
090109
741111
Description
Brake Cleaner NC 12 oz. (340g)
Qty
1
S-21
Brake Cleaner NC is a powerful, non-chlorinated solvent blend, formulated to
dry quickly. This technologically advanced formula safely and efficiently
cleans all brake parts and is also an excellent cleaner for metal parts. The
high pressure delivery system allows for thorough cleaning of all brake
surface parts. Dissolves grease, oils, tar, asphalt, resins, brake fluid, and
many other soils. Does not contain chlorinated solvents that can
contaminate waste oil. Does not contain 1,1,1 Trichloroethane. Does not
contain Perchloroethylene.
No.
CHEMICALS
Battery Cleaner & Protector
CHEMICALS
Industrial Cleaning
Choke & Carb Cleaner
Choke & Carb cleaner uses a high power blasting action plus a special
blend of high strength solvents which quickly removes harmful deposits
from internal chamber areas.
Features:
• Better Mileage and Performance – eliminates rough idling and removes
carbon build up
• Removes Carbon, Dirt, Gum and Varnish Deposits
• Will Not Foul or Coat – safe on oxygen sensor and catalytic converters
Applications:
• Cleans, frees and renews automatic chokes,
carburetors, carburetor linkages,
PCV valves, manifold heat controls
No.
74143
Description
Choke & Carb Cleaner 13 oz. (369g)
Qty
1
S-22
Cobra Coil
Evaporator/Condenser Coil & Fin Cleaner
Cobra Coil is formulated to penetrate air-conditioner coils and fins to remove
all types of soils. NOTE: Product may harm some plastics. Test before using.
Features:
Applications:
• Removes grease, oil and water deposits
• Self rinsing
• Fast acting
• Air Conditioners
• Central Cooling Systems
• Auto Air Conditioners
No.
74110
De-Ice
Description
Cobra Coil 15 oz. (425g)
Qty
1
Frost and Ice Remover
De-Ice quickly melts ice, frost and snow from windshields, windows,
steps, door locks, ignition locks and trunk locks.
Features:
•
•
•
•
Will not harm paint, cloth, metal, rubber, glass and plastic
No residue to impair visibility
Helps prevent fogging when applied to inside of window surfaces
Improves traction of wheels on extra thin ice
• Windows, windshields, door locks,
steps, headlights, tires
No.
74125
Description
De-Ice Frost Remover 12 oz. (340g)
Qty
1
092208
Applications:
Industrial Cleaning
Non-Chlorinated Electrical Safety Cleaner
Peel It is a non-corrosive, non-conducting cleaner degreaser that improves
electrical performance and increases equipment life.
NOTE: Product may harm some plastics. Test before using. Do not
use on sensitive electronic equipment: computers, VCR’s, etc.
Not recommended for use on energized equipment.
Features:
CHEMICALS
Peel It
Applications:
• Heavy duty degreaser
• Automotive interiors
• Cleans metal parts, electric motors and
• Colorfast carpets
equipment
• Most fabrics
• Ideal for removing road tar, greases and
• Painted surfaces
soil from automotive interiors, colorfast
• Metal parts
carpets and surfaces
• Electric motors and equipment
• Non-chlorinated
No.
Description
Qty
• Non-corrosive
74137
Peel
It
Electrical
Safety
Cleaner
14
oz.
(396g)
1
• Non-conducting
Features:
• Hand Soap is an all-purpose liquid hand soap of superior
mildness to skin
• Formulated with blends of rich emollients
• Excellent lathering
• Thoroughly cleans tough grime
No.
75010
Description
Pink Hand Soap
Qty
12
Push-Pak Hand Soap System
092208 Rev. 072011
Features:
•
•
•
•
•
No-block, no-leak valve on each disposable refill bag-in-a-box
Sight window insures dispenser is never empty
Easy loading
Push bar secures dispenser on wall
Sealed pouch guards against spreading of germs
No.
75010
75011
Description
Pink Hand Soap
Push-Pak Hand Soap System
Qty
12
1
S-23
Pink Hand Soap
Ruthless
Paint Remover
Features:
Applications:
• USDA authorized gel base paint remover
•
• Removes a wide range of paints and surface
•
sealers from metal, concrete and wood
•
• Simply spray on and wipe or rinse
•
• Quickly removes paint, epoxy, lacquer, decals,
•
gaskets, shellac, enamel, varnish, labels,
•
gasket cement, glue, carbon deposits, silicone
•
and simulated wood paneling
•
• Authorized by the USDA for use in Federally
inspected meat and poultry shops
No.
• Works hard to remove paint
74140
Metal Parts
Plaster
Concrete
Glass and Tile
Ceramic
Engine Parts
Valve Seals
Paint Guns
Features:
No.
• Non-flammable, non-conductive
• Can spray in electrical motors even
while running
Description
Qty
Safety Solvent IV 20 oz. (566g)
Sparkle
Paper
Wood
Stone
Masonry
Cylinders
Qty
Ruthless Paint Remover 13 oz. (369g)
A residue free, fast drying, high power spray
that dissolves grease and rinses away dirt and
grime without injury to working parts. Features
a 36,200 volt dielectric strength. Authorized
by the USDA for use in Federally inspected
meat and poultry plants.
74156
•
•
•
•
•
Description
Safety Solvent IV
S-24
1
1
Applications:
•
•
•
•
•
•
•
•
•
•
•
Diesel Engines
Marine Equipment
Aircraft Parts
Industrial Equipment
Heating & Air
Conditioning Equipment
Refrigeration Equipment
Generators
Motors
Windings
Power Tools
Food Processing
Equipment
Stainless Steel Cleaner
Features:
• Preserves high luster
• Cleans, brightens, polishes and protects, forms protective coating on
stainless steel
• Can be equally effective on aluminum, chrome, formica, porcelain and ceramic
• This formula is authorized by the USDA for use in
Federally inspected meat and poultry plants
Applications:
No.
• For use in hospitals, schools,
74126
restaurants, hotels, factory
and non-abrasive institutional uses
Description
Sparkle S/S Cleaner 18 oz. (510g)
Qty
1
092308
CHEMICALS
Industrial Cleaning
Industrial Cleaning
CHEMICALS
Tech Blast
Contact Cleaner Will Not Affect Plastic
Ideal for removing dirt and grease from delicate or sensitive electronic
equipment. It will clean oil, grease, condensation and moisture from circuit
boards, precision instruments, oxygen equipment, controls, switches, motors
and film. NOTE: Not for use on styrene or polystyrene.
No.
Features:
74129
Description
Qty
Tech Blast 13 oz. (369g)
1
• Safe for use on Neoprene W, Silicone
Rubber, Natural Rubber, Hypalon 40, Adiprene L, Delrin Resin, Polyethylene,
Nylon, Teflon, Buna N, Butyl, Thiokol FA, Buna S, Viton A, Nordel, Zytel, PVC
• Non-flammable
Vigor M Super
Water Soluble Industrial Cleaner & Degreaser
•
•
•
•
Spray or mop on and wipe off
Ideal for use in automatic scrubbers because of low foaming qualities
A heavy duty cleaner and degreaser
Penetrates and emulsifies even in the heaviest dirt, grease and oil
Applications:
• Grease, wax, gum, dirt,
ink, carbon, oil and lipstick
Citra-Lift
No.
74420
74421
Description
Vigor M Super (1 Gallon – min. 4)
Vigor M Super (5 Gallons)
Qty
4
1
Heavy Duty Industrial Foam Cleaner & Degreaser
092308 Rev. 072011
A unique aerosol foam which enables simple and easy cleanup of tools, parts,
workbenches, vent covers, machinery, coils, industrial equipment, concrete and
more! Sprays as an engulfing, heavy-duty foam that clings to surfaces and
provides extended cleaning contact time. Contains super-powerful, water-soluble,
grease-dissolving agents and detergents for instant mega-forceful cleaning
action. Provides a self-indicating cleaning action foam which quickly breaks down
grease and grime and becomes dirty, indicating soil is ready to be flushed clean.
Deodorizes as it cleans, leaving the area with a fresh citrus aroma.
Features:
Applications:
• Fresh citrus aroma
• Powerful “foam gun” spray
• Ultra fast, super powerful
grease dissolving action
• Environmentally friendly,
biodegradable
• Dirty engines, greasy oily machinery, tools,
lawn equipment, construction equipment,
road equipment, driveways and parking lots,
industrial equipment, air conditioning coils,
exhaust vents and more
No.
74151
Description
Citra-Lift 16 oz. (453g)
Qty
1
S-25
Features:
TMC Hand Soaps
A Unique “Bag-in-Bottle” Cartridge and
Durable Dispensing System
Features:
• Space saving large capacity – greater capacity means
fewer changeouts
• Ultimate view window created by the unique
bag-in-bottle design – soap level is easily inspected
without spending time opening cabinets
• Time-tested dispensing technology – eliminates potential
performance issues
• Sealed bag of skin care product is “suspended” inside
the bottle – improves soap evacuation and reduces waste
• Durable construction – both dispenser and cartridge are
built to perform in all types of environments
• Meets ADA push force requirements – easy to use,
even for the elderly and disabled
• Completely waterproof – perfect dispensing option for
high moisture environments like showers
• Simple loading and fast installation – saves time
• Consistent premium quality appearance – appearance is
refreshed each time the bag-in-bottle cartridge is replaced
Applications:
•
•
•
•
•
•
•
•
•
Manufacturing Facilities
Meat, Poultry and USDA Inspection
Healthcare, Hospitals, Clinics and Rest Homes
General and Office Restrooms
Foodservice
Governments, Schools
Entertainment, Convention and Sports Complexes
Shopping Malls
Health Clubs and Spas
No.
75100
75101
75102
75103
75104
75105
Size
–
2,000 ml bottle
2,000 ml bottle
2,000 ml bottle
2,000 ml bottle
2,000 ml bottle
Description
Dispenser for 2,000 ml bottles
Regal Extra Mild Hand Cleaner
Antibacterial Hand Soap
Citrus Scrub Hand Cleaner
Pink Lotion Skin Cleaner
Enriched Lotion Soap
Qty
1
4
4
4
4
4
092308 Rev. 072011
S-26
CHEMICALS
Industrial Cleaning
Industrial Cleaning
CHEMICALS
Dispenser for 2,000 ml Bottles
The dispensing system replaces traditional cabinets by utilizing timetested sealed bag-in-box dispensing technology in a unique “bag-inbottle” cartridge and durable dispenser combination. Cartridges are
easily inserted into the dispenser and locks in place.
No.
75100
Description
Dispenser for 2,000 ml bottles
Qty
1
Regal Extra Mild Hand Cleaner
This powerful, non-solvent hand cleaner is formulated with four
heavy-duty surfactants. It is both strong, yet very mild on hands. It
has a neutral fragrance that leaves no lingering smell after use.
Contains plastic scrubbers which won’t clog drains like pumice does.
Size
2,000 ml bottle
Description
Regal Extra Mild Hand Cleaner
Qty
4
Antibacterial Hand Soap
Gold-colored soap featuring the superior germ-fighting power of
TRICLOSAN (.3%)- proven to kill a wide variety of disease-causing
bacteria, viruses and fungi on contact, including MRSA and VRE.
Lathers up quickly. Includes moisturizers and conditioners to soften
hands-and deodorizers to eliminate even the most offensive odors.
USDA E-4 listed.
No.
75102
Size
2,000 ml bottle
Description
Antibacterial Hand Soap
Qty
4
Citrus Scrub Hand Cleaner
092308
Citrus Scrub is our natural citrus hand cleaner with pumice to help
clean and safely remove grease, oil, paint, ink and carbon more
quickly. This product is formulated with a natural citrus-based
solvent and is petroleum free. Citrus Scrub has a refreshing orange
scent and may be used without water.
No.
75103
Size
2,000 ml bottle
Description
Citrus Scrub Hand Cleaner
Qty
4
S-27
No.
75101
CHEMICALS
Industrial Cleaning
Pink Lotion Skin Cleaner
A blend of natural soaps and synthetic cleaning agents to maximize
cleaning with luxurious suds. Contains emollients to leave skin soft
and smooth. Formulated for medium to heavy soil removal to be used
in a wide range of applications. Pleasant scent encourages frequent
use. Pearlized appearance is aesthetically pleasing.
No.
75104
Size
2,000 ml bottle
Description
Pink Lotion Skin Cleaner
Qty
4
Enriched Lotion Soap
S-28
Extremely effective, high-sudsing cleanser, offering thick, rich texture
and attractive white color. Scientifically formulated with Merquat to
be gentle to the skin. Rinses away easily and leaves hands pleasantly
yet mildly scented. Recommended for applications where frequent,
repeated hand washings are required. USDA E-4 listed.
No.
75105
Size
2,000 ml bottle
Description
Enriched Lotion Soap
Qty
4
Hand Sanitizing Gel
Anti-Bacterial Hand Sanitizer
Hand sanitizer formulated with the antimicrobial properties required
for health care and emergency services. Kills 99.9% of most bacteria
that could cause disease in as little as 15 seconds without soap,
water or towels. USDS E-4 Listed.
Features:
Applications:
• For handwashing to decrease bacteria on skin
No.
75111
75110
Size
2,000 ml bottle
4 oz. Squeeze Bottle
Description
Hand Sanitizing Gel
Hand Sanitizing Gel
Qty
4
3
092308 Rev. 072011
• Thick gel formula – won’t run off hands during application
• 62% ethyl alcohol – kills 99.9% of 8 important organisms in
15 seconds or less
• Evaporates quickly
• Fragrance free, dye free – eliminates irritation caused by dye and fragrances
• Use without water – helps meet OSHA’s standard for bloodborne pathogens
Industrial Cleaning
CHEMICALS
Ultra-Gel Green Max Degreaser
TM
Superior thick, heavy-duty formula provides spray and wipe degreaser / cleaner that
destroys grease and grime on contact. It also destroys odors leaving a pleasant
lemon / lime fragrance. For use on all hard surfaces to clean and degrease the
toughest jobs or even light clean-ups. Extremely effective and easy to use. Will not
affect paint, glass or mirrors and works great on grout and tile. The unique thixotropic
formula adheres to surfaces for more effective cleaning and less dripping / waste.
Features:
•
•
•
•
•
Maximum Strength – degreases/cleans toughest soils
Thick, Heavy-Duty Spray – won’t drip
Ultimate Formula – destroys grease & grime on contact
Incredible Wheel Cleaner – melts away brake dust
Thixotropic* Spray – sticks to surfaces for more
effective cleaning
No.
71102
Description
Qty
Ultra-Gel Green
1
Max Degreaser 1 Quart (32 oz.)**
** Trigger sprayer not included.
Order Standard Trigger P/N 71254 or
HD Chemical Resistant P/N 71255.
* THIX’-O-TROP’IC: The phenomenon exhibited
by certain gels of becoming thick when shaken
and returning to a fluid liquid upon standing.
Ultra-Gel Orange
Glass & Surface Cleaner
TM
Features:
71100
Ultra-Gel Orange
Glass and Surface
Cleaner 1 Quart (32 oz.)**
1
• Superior Strength Cleaner – destroys tough soils
• Multi-Surface – superb on glass, mirror, chrome,
stainless, paint, etc.
** Trigger sprayer not included. Order
• Ultimate Formula – impossible to streak or spot
Standard Trigger P/N 71254 or
HD Chemical Resistant P/N 71255.
• Eliminates Odors – leaves pleasant citrus scent
• Thixotropic* Spray – sticks to surfaces for more effective cleaning
Stain Lift-R
Instant Stain Remover
Instantly Removes The Toughest Stains . . . Safely and Effectively!
TMC’s Stain Lift-R actually lifts stains from carpets, upholstery and fabrics quickly and
easily. Simply rub it in and blot up. Leaves surfaces clean and fresh smelling . . . without
a soapy residue. It contains no solvents, acids or other hazardous materials.
Features:
No.
100109 Rev. 072011
74152
Description
Stain Lift-R - 1 Quart (32 oz.)
Qty
1
• Unique, Proprietary Formulation – provides
incredible stain removal performance
Applications:
• Water-Based Foundation – safe for virtually any
• Blood, chocolate, crayon,
application
Kool-Aid®, grass, iodine, oil,
• Contains No Harsh Solvents or Hazardous
Ingredients – less harmful to the user & the environment
shoe polish, candle wax, coffee, food,
• Multi-Purpose Formula – ideal for all carpet,
grease, latex paint, pet stains, tea, wine,
upholstery and other fabrics
ketchup, cosmetics, fruit juice, grime,
• Virtually Odorless – leaves surfaces clean and fresh
liquor, urine, washable ink, etc.
S-29
This incredible streak-free, ready-to-use formula dissolves film, soils, fingerprints,
grease, oil, bugs and much more. Ideal for glass, windshields, mirrors, chrome,
stainless, painted and virtually any hard surfaces. Superior for vertical or overhead surface cleaning as it clings without dripping. Test on inconspicuous area
prior to use on sensitive or colored/painted surfaces. Pleasant odor neutralizer,
formulated to kill malodors at their source.
No.
Description
Qty
CHEMICALS
Industrial Cleaning
OxiGreen Pro
TM
Concentrated Cleaner/Degreaser
OxiGreen ProTM Concentrated Cleaner is an oxidizing multi-purpose cleaner, degreaser and
deodorizer for hard, non-porous surfaces. A versatile dilution satisfies all general cleaning
needs in any environment. Use with dispensers, spray bottles and buckets. TMC’s OxiGreen
ProTM is just one more step in helping the environment by offering safer alternatives to
standard janitorial cleaning systems and programs.
• Super Concentrate Formula – is extremely cost effective
• Alternative Chemical Composition – provides an increased
safety for the user and the environment
• Strong Solvent Action – attacks grease with low residue
• Peroxides and Surfactants – clean glass and mirror fast,
yet Streak-free
• Natural deLimonene Orange Oil – for the ultimate in cleaning
power and safety
• Amazing Oxidizing Action – restores grout without harsh acids
• Incredible Range of Uses – even provides effective carpet care
program
• Light Fresh Fragrance and Built-in Deodorizers – eliminate odors
• Low V.O.C.’s – contribute to improved air quality
Applications:
• Use on equipment, machinery, parts, renovations,
heavy duty degreasing, windows, mirrors, walls,
floors, bathrooms, shower rooms, tile and grout
and carpet.
No.
74163
Description
OxiGreen ProTM (1 Gallon)
Qty
4
FOR EASY DILUTION AND APPLICATION, SEE BOTTLES AND TRIGGER SPRAYERS ON PAGE S-33
TMC is helping users, industry and the environment by offering safer alternatives to
standard janitorial cleaning products. Reduces toxicity by eliminating common industrial
chemicals. OxiGreen ProTM contains no acids, alcohol, amines, ammonia, caustic, chlorine
bleach, glycol ethers, phosphates, quaternary ammonium compounds, dyes or perfumes.
TMC is dedicated to creating healthier, more productive indoor environments with lower
burdens on our natural resources, while providing products that work. Our commitment to
Green Cleaning is answering the demands of business and industry. Our OxiGreen ProTM
program offers safer alternatives to standard cleaning systems and programs by reducing
indoor air toxicities and eliminating harsh industrial chemicals.
DIRECTIONS FOR HARD AND NON-POROUS SURFACES
NOTE: Dilution with cold tap water is recommended.
LIGHT DUTY CLEANING – 1 to 4 oz. per gallon
NORMAL CLEANING – 5 to 8 oz per gallon
HEAVY DUTY CLEANING AND DEGREASING – 9 to 15 oz. per gallon
092308 Rev. 072011
S-30
Features:
Dispensing Equipment
CHEMICALS
Standard Trigger Sprayer
Features:
• Ergonomic design and extra-long trigger provides
unsurpassed comfort
• 1.3 ml per stroke, 30-40% greater than standard trigger
sprayers
• Extra large spray pattern
• Unique internal piston design provides better chemical resistance
• Works well with most common janitorial chemicals, even
D-limonene products.
No.
71254
Description
Standard Trigger Sprayer
Qty
1
HD Chemical Resistant Trigger Sprayer
• All the features of #71254 plus superior chemical resistance
• Nozzle O-ring and piston cup are made of chemical resistant
Viton
• 1.3 ml per stroke, 30-40% greater than standard trigger
sprayers
• Holds up against harsh chemicals and solvents
• Use with chemicals that cause standard trigger sprayers
to fail
No.
71255
Description
HD Chemical Resistant Trigger Sprayer
CleanCheck Quart Bottle
092308 Rev. 072011
Features:
• Molded ounce/mililiter and dilution scales
• 2-color imprint with product check off identification
• Bottles printed with ultra violet ink for superior chemical resistance
and a bright, glossy finish
• Easy to read safety information, MSDS reference, eye and hand
protection
• Product listing is bilingual (English/Spanish)
No.
71257
Description
CleanCheck Quart Bottle
Qty
1
Qty
1
S-31
Features:
HD Chemical Trigger Sprayer
and Quart Bottle
Features:
• Molded ounce/mililiter and dilution scales
• 2-color imprint with product check-off identification
• Bottles printed with ultra violet ink for superior
chemical resistance and a bright, glossy finish
• Easy to read safety information, MSDS reference, eye and hand protection
• Product listing is bilingual (English/Spanish)
No.
S-32
71256
Description
Qty
HD Chemical Resistant Trigger Sprayer
and Quart Bottle
1
3 CleanCheck Bottles and
3 Standard Trigger Sprayers
Features:
• 3 CleanCheck bottles and 3 standard trigger sprayers
• Assembled and sealed in a clear polybag
• 32 oz. sizes
No.
71259
Description
Qty
3 CleanCheck Bottles and
3 Standard Trigger Sprayers
1
Hudson NeverPump
TM
Battery Operated Trigger Sprayer
Features:
•
•
•
•
•
•
Outstanding quality and dependability, full featured
Tough, heavy-duty, translucent poly tanks
Batteries included
Higher performance pump – sprays like magic
Big, extra comfortable pump handle
NeverPumpTM sprayers feature a battery-operated pump
No.
71220
Description
Hudson NeverPumpTM 36 oz. (1.06 l.)
Qty
1
092308 Rev. 072011
CHEMICALS
Dispensing Equipment
Insect Repellent
Wasp & Hornet Killer
Long range, fast acting wasp and hornet killer with synthetic pyrethroid formula
that literally stops wasps, hornets, yellow jackets and bees in flight on contact.
EPA Registration #11623-38-81169
Features:
• Special blast valve sends a powerful, anti-drift stream twenty feet or more
to quickly and safely saturate nests and swarms
• Residual action continues to kill as insects return to nest
• Non-conductive formula has
No.
Description
Qty
a dielectric strength of
74177
Sting Wasp & Hornet Killer 13 oz. (369g)
1
33,000 volts/cm
CHEMICALS
Sting
Total Solutions Insect Repellent
Towelettes Repels insects on exposed skin surfaces
TM
Features:
• Towels allow users to apply repellent without affecting eyes or
mouth
• Special repellent keeps insects away for hours
• Use on the job or at play
No.
71086
Description
Insect Repellent Towelettes (15 ct.)
Qty
12
Total Solutions d’BUG
TM
An all-natural, non-toxic insecticide
Non-toxic and safe to use around humans, animals and food. Instantly strips
away protective wax coating from the exoskeletons of insects, causing them to
suffocate and die on contact. It can also be used as a residual insecticide that
works for several weeks after application. DOES NOT INCLUDE SPRAY NOZZLE.
Applications
093008 Rev. 072011
Features:
• Effective against ants,
• EPA approved, non-toxic formula is safe for
fleas, silverfish,
use around children, pets and food
roaches, palmettos
• Use as a contact insecticide for immediate kill
• d-Limonene dissolves the protective layer of wax
from the exoskeletons of insects causing them to suffocate and die
No.
71248
Description
Total SolutionsTM d’Bug (1 Quart)
Qty
12
EPA Registration #61887-1-68562
S-33
Repels mosquitoes, flies, chiggers, ticks, deer flies, stable flies,
black flies, gnats and fleas on exposed skin surfaces.
Anti-Seize Lubricant & Pump
Features:
• Selected prepared blend of extra fine graphite and aluminum particles in synthetic oils
• Unique qualities prevent corrosion, seizure, and galling where two metals
must come together to provide a tight make up (even stainless steels)
• Absolutely non-melting, will not drip or run
• Superior to copper or lead based lubricants because it
No. 70550
eliminates electrolysis, withstands higher temperatures
Pump Top
and pressures and gives cleaner breakouts from high torques
S-34
Applications:
•
•
•
•
•
•
•
•
•
•
Furnaces and burner assemblies
Key ways and shaft coupling bolts
Fuel injectors and spark plugs
Low RPM bearings
Rollers and conveyors
Gears, chains and drives
All threaded fittings
No.
Gaskets, flanges and O-rings
70210
Valve stems and cages
70550
Cylinder head assemblies
Picture
shown is
Anti-Seize
Lubricant with
pump.
Pump and
Lubricant sold
separately.
Description
Qty
Anti-Seize Lubriant 16 oz. (425g)
1
Pump Top
1
Note: Not recommended for high RPM bearing applications
Sili Lube
Heavy Duty Silicone
Applications
• For use on rusted parts, wire cable, door hinges, chains, hoists, pulleys,
cranes, fork lifts, sprockets, gears, block & tackle, conveyors, construction
machinery, industrial parts, locks, box forming equipment
• For use by farms, oil rigs, refineries, bottling plants, dairies, paper mills,
cotton gins, air conditioning, industrial plants, textile plants, lumber mills,
cement plants, automotive/motorcycle/marine repair, packing houses
Note: Product may harm some plastics. Test before using.
No.
74101
Description
Sili Lube 15 oz. (425g)
Qty
1
093008 Rev. 072011
CHEMICALS
Lubricants
Lubricants
High Temperature Applications
Red Grease II is an all purpose heavy-duty non-melt lubricant
specially formulated with extreme pressure and anti-wear additives.
CHEMICALS
Red Grease II Cartridge
Features:
24 cartridges per case.
Cases cannot be broken.
No.
74402
Description
Qty
Red Grease II Cartridge (24 ct/case)
24
White Guard Supreme Cartridge
With PTFE
This specialty high temperature polymer grease formulated with PTFE is
engineered specifically for the food processing and packaging industry. It is
authorized by USDA for use in federally inspected meat and poultry plants.
Applications:
• Use on conveyors, rollers, cables, dicers, slicers, gears, sprockets,
casters, grid belts, guide rails, cams, chairs, chains, slides, plungers,
and open lube points
No.
093008 Rev. 072011
74410
Description
White Guard Supreme Cart. 14 oz. (396g)
Qty
12
S-35
• Exceptional resistance to acids, water, salts, weather, dirt, dust,
steam and oxidation
• Excellent adhesive, cohesive and anti-wear properties
• Resists harsh outdoor conditions, extreme pressure, and high heat
of up to 550°F
• High shock and impact resistance extra cushioning reduces shock
and noise
• Prolongs life of metals with its special corrosion and rust inhibitors
• Seals out dust, dirt, water, and other contaminants
• Excellent load carrying capabilities – 50 lb
• Totally non-conductive
• Fits any standard cartridge-type grease gun
Red Grease HD
Features:
• Aluminum based multi-purpose
lubricant provides extra protection under extreme pressures
• Excellent reversibility (ability to return to original consistency
after exposure to heat) – will not harden, separate or emulsify when
subjected to excessive heat or pressure.
• 100% waterproof – resists water, acid, salts, and alkaline chemicals
• Prevents dust and grit from migrating into the grease
• Penetrates as a liquid - congeals to a thick grease. Maintains high
viscosity under high load and resists oxidation during periods of
no load and at rest
• Good shear resisting structure minimizes thinning under high load thereby
maintaining the viscosity to provide good lubricity
• Non-freezing
• For use on all electrical motors, shafts, fifth wheels, roller chains, agricultural hitches,
heavy duty equipment, bearing surfaces, cables, pulleys, hinges, etc.
No.
74114
Description
Red Grease HD 11.25 oz.
Slick
Qty
1
Teflon® and Moly Penetrating Lubricant
Slick is a USDA authorized penetrating oil and rust dissolver containing
micron size particles of Teflon® and Moly.
Features:
•
•
•
•
•
Contains Teflon® and Moly for excellent lubrication
Withstands heavy loads
Resists rust and corrosion even in extreme conditions
Prolongs life of machinery
Quickly penetrates to free rusted parts
Applications
• For use on rusted parts, wire cable, door hinges,
No.
Description
Qty
chains, hoists, pulleys, cranes, fork lifts, locks
74135
Slick 12 oz. (340g)
1
sprockets, gears, block & tackle, conveyors,
construction machinery and industrial parts
• For use by farms, oil rigs, refineries, bottling plants, dairies, paper mills, cotton gins,
cement plants, industrial plants, textile plants, lumber mills, automotive/ motorcycle/
marine repair, and air conditioning
093008 Rev. 072011
S-36
CHEMICALS
Lubricants
Lubricants
TM
A multi-purpose thread sealant formulated with the highest percentage PTFE
content on the market. PTFE particles fill cracks and tiny thread imperfections –
providing superior lubricating and sealing properties. Leak-free joints can be
tested and put into service immediately. Holds tight against vibration, expansion, and
contraction. Brushable; non-separating; will not run or drip from joints. Soft set; no cure time
required. Withstands temperatures from -50ºF to 500ºF (on steel pipe), and pressures of
12,000 psi (hydraulic), 2600 psi (gas). For use with liquids, including acids and alkalis and gases
(except oxygen). Superior anti-galling properties with stainless steel. Excellent resistance to
strong acids, alkalis and ketones. Non-flammable and contains no heavy metals or volatile
solvents. Certified to ANSI/NSF Standard 61, safe for potable water lines. Meets Fed. Spec.
TT-S-1732. White. Recommended Uses:
No.
Description
Qty
Metals, including galvanized steel,
156050 PTFE Thread Sealant (2 oz. tube)
1
black iron, aluminum, copper, brass,
156201
PTFE Thread Sealant (1/2 Pint Brush Cap)
1
stainless steel and on PVC, ABS & CPVC.
Hi-Density Lube-All was developed to be transparent, high pressure lubricant
with extremely high adhesive strength.
Features:
• Tremendous temperature range up to 600°F will not break down under high
temperatures as other heavy greases do
• Resists water wash out to keep parts lubricated, prevent rust and corrosion
• Penetrates as a liquid and sets up as a gel for hard to reach areas
• Excellent for use on door hinges, open gears, wire ropes, cables, conveyors,
chains and sprockets
No.
Description
Qty
74144
Hi-Density Lube-All 13 oz. (369g)
1
093008
Air Tool Conditioner
Air Tool Conditioner provides a fast, effective way to clean, lubricate and extend
the operating life of all air tools.
• Enables motor parts to move more
Features:
freely
• Fast and easy to use
• Restores air tools to peak power and
• Perfect for grinders, drills, sanders,
rpms and enables tools to work more
impact wrenches, polishers,
efficiently
air motors and jack-hammers
• Helps prevent tool binding & slow down
• Removes build-up of calcium, varnish,
• Inhibits rust
sludge and water. Enables air
No.
Description
pressure to penetrate more freely,
74136
Air
Tool Conditioning 12 oz. (340g)
thus giving more power to the tool
Qty
1
S-37
Hi-Density Lube-All
CHEMICALS
Hercules® Real Tough
PTFE Thread Sealant
High-Temp Anti-Seize
High-Temp Anti-Seize is great for nuts, bolts, studs, etc. It is also a
quality lubricant and protective coating.
Features:
Applications:
• Multiple use product eliminates the
need for other coatings, protectorates and lubricants
• Effective to temperatures exceeding
2000° F. Can be used effectively in
many different temperatures
making it an ideal choice for highly
corrosive environments.
• Prevents corrosion from bearings,
nuts, studs, etc.
• Ideal for use as anti-seize on nuts, bolts & studs
• Premium quality lubricant for bearings, slides, etc.
• Protective coating for use in highly corrosive
environments
No.
74134
Silicone Spray
Description
High-Temp Anti-Seize 13 oz. (369g)
Qty
1
Food Grade Silicone
S-38
Silicone Spray is a lubricating, waterproofing and rustproofing agent for
indoor and outdoor applications. Made especially for use on food processing
equipment and containers. Use to eliminate minor squeaks.
Features:
• Use safely on food handling equipment
• Stays within FDA guidelines allowing no
more than 10 ppm to be imparted to food
• Helps fight rust on all types of molds and
dies and keeps materials from sticking
to conveyor belts
Applications:
• Conveyors, slicing machines, grinders, cooking coils,
mixers, hand equipment, saws, packaging machines, etc.
Chain & Cable
• Prevents papers and plastics
from sticking to heat sealing
equipment
• Dry lubricant, release agent –
heat stable with rust inhibitor
• Temperature range works
from -58oF to +575oF
No.
74108
Description
Silicone Spray 9.25 oz.
Qty
1
Lubricates Gears, Chains & Cables
Thick foam clings to vertical surfaces. As foam breaks, Chain & Cable
penetrates into wire rope, link and roller mechanisms.
Features:
Applications:
• For use on cranes, hoists,
• Recommended for use in
Wire Rope
cables and roller mechanisms
severe climactic conditions
Cross Section
• Will not break down under
The 3-piece section in the center of the rope is called a “Hemp”. As cable
strains when a load or stress is put on it, the steel tends to stretch, and
high temperatures
the center steel hemp section rubs together causing wear in the cable.
• Provides resistance to wear Chain & Cable not only lubes the outside of the cable, but will penetrate
the outer wires of the cable and lube the center hemp. This is critical in
• Extreme pressure capability
minimizing wear on all cables. Most cable wear is on the inside core with
very little evidence on the outside . . . thereby showing very little signs of
• Contains graphite
potential failure until it’s too late and the cable needs to be replaced.
• Forms protective rust barrier
No.
Description
Qty
• Will not attract dirt and grime
74124
Chain & Cable 16 oz. (455g)
1
093008
CHEMICALS
Lubricants
Lubricants
Exotic Metals Lubricant
Tool Cool Blue is specially designed for problem metalworking jobs, and is the
best product available for stainless, high carbon, high chrome, cast iron monel,
etc. It's also the solution for difficult metal working operations such as welds
on carbon steel.
Features:
Applications:
• Cuts 30% faster than dry cutting*
• Extends cutting tool life
• Reduces down time
• Used for drilling, tapping, sawing,
spot facing, counterboring, milling,
fly-cutting, seat forming, engraving,
broaching, drawing, piercing,
punching, hole extruding and more
• Use on non-ferrous metals, such
as brass and aluminum
No.
74206
Description
Tool Cool Blue 8 fl. oz. (227g)
* Individual results may vary by
material and drill
Qty
1
Dry PTFE Lubricant is a chemically inert, non-oil, fast drying lubricant and
release agent containing an extremely fine Teflon® powder.
Applications:
• Used by bottling plants, dairies, processing and packaging plants,
manufacturing plants, maintenance departments, and assembly operations
• Safe on plastic, aluminum, rubber, glass, wood, paper, metal
No.
74116
Description
Dry PTFE Lubricant 11 oz. (312g)
White Grease
Qty
1
Multi-Purpose White Lubricant (Food Grade)
093008
White Grease has the highest USDA authorization for a lubricant with
food contact.
Features:
Applications:
• Extreme temperature
resistance
(0°F to +450°F)
• Excellent adhesion
• Reduces frequency
of lubrication
• Highest acceptance
rating (H-1) by U.S.D.A.
• Resists acids, oxidation,
dirt, and salt spray
• Use on ovens, dryers, gears, valves, pumps,
winches, conveyors, chain drives, fittings,
linkages, wire rope, hoists, threads, rollers, cams,
slide bearings, o-rings, manifold heat valves
• Used by bakeries, bottlers, breweries,
canneries, dairies, egg processors, edible
chemical manufacturing, meat and poultry
processors, pharmaceutical manufacturers,
food processing and
No.
Description
Qty
packaging plants
74104
White Grease 10 oz. (283g)
1
S-39
Dry PTFE Lubricant
CHEMICALS
Tool Cool Blue
Moly Dry Lube
(Molybdenum Disulfide Dry Lubricant)
Moly Dry Lube is a dry film lubricant that withstands high pressures and temperatures.
Applications:
Features:
• For use on all metal moving parts,
• Provides effective lubrication at
high speed gears, machine tools,
temperatures up to 600° and under
high pressure loads
pump assemblies, conveyors, chain
• Quick drying, non-tacky finish
drives, fittings, linkages, bearings,
adheres well to all metals, most
wire cable, pipes, engines, heavy
plastics, glass and rubber
equipment, exposed metal parts
• Molybdenum disulfide replaces
• Used by industrial plants, oil rigs, pipe
graphite to free frozen surfaces,
yards, construction areas, machine
stop galling and seizing of metals
shops, farm equipment, repair services,
and prevent chattering, extending
office machines, aircraft manufacturers
the life of machinery and equipment.
and suppliers, commercial printers
• Provides a protective barrier that
No.
Description
resists dust and abrasive particles
74123
Moly Dry Lube 12 oz. (340g)
and withstands water, oil, alkali & most acids
S-40
Buster
Qty
1
Rust Penetrant
A superior blend of lubricants, solvents and moisture displacing oil. Foaming
action provides extended penetration and moisture displace-ment. The light
foam of this product allows for "creeping" in any direction.
Features:
•
•
•
•
No.
74174
Outstanding penetrant that loosens the toughest rust
Contains oily lubricants to assist in removal of threads
Penetrants creep between mating parts for faster, safer loosening
Foaming action minimizes run off and keeps more product working on the
rusted part
• Ordinary penetrating oils evaporate from heat as nut or bolt is backed off
• Leaves a coating of moly to help eliminate
Description
Qty
breakage
Buster 15.75 oz.
1
Tool Cool
A special blend that extends the life of drill bits, taps and reamers
through reduction of tool temperature.
No.
Description
Features:
•
•
•
•
•
•
74102
Tool Cool 18 oz. (510g)
Reduces tool temperature and helps trim friction
Prevents heat build-up in heavy material
Helps disperse cutting chips
Has no sticky residue
Clean up of chips is fast – wipe off with a rag or blow off with air hose
Non-flammable
Qty
1
093008
CHEMICALS
Lubricants
Lubricants
CHEMICALS
4 Way Plus
Moisture Displacer
4 Way Plus is a fast and effective moisture displacer.
Features:
•
•
•
•
•
•
•
Dries wet ignitions for fast starting of wet engines
Dries electrical systems, generators, alternators and starters
Provides moisture barrier - excellent for all electrical equipment
Frees rusted parts – keeps them free with rust protection
Stops squeaks – provides permanent protection against metal-to-metal wear
Non-flammable – safe to use
Meets gov’t specifications MIL-C-16173D,
MIL-C-23411A, and VV-L-800A
No.
Description
• Special propellant extends usage to cold
74107
4 Way Plus 15 oz. (425g)
weather temperatures
Qty
1
Open Gear Lubricant
Features:
Applications:
• An excellent long life formula
that is very effective,
even in underwater conditions
• Clinging tacky formula
• Lubricates and protects all gear surfaces
• Can withstand extreme pressure capacities
• Increases gear life
• Use on chains, cable,
hoists, gears, drag lines,
cranes, snow removal
equipment, marine and
dockside equipment,
fifth wheels, elevators
and more
No.
74118
Fast Cut
Description
Open Gear Lubricant 14 oz. (396g)
Qty
1
Cutting & Tapping Compound
A foaming oil that clings to all cutting tools, preventing waste and over
spraying. Combines synthetic and natural lubricants for maximum high
pressure lubrication, which will increase the cutting rate without overheating.
Features:
• Prevents chip welding
• Eliminates dangerous and costly tool breakage
• Can be used on aluminum
No.
093008
Applications:
74149
Description
Fast Cut 14 oz. (396g)
• Use in industrial plants, machine shops, automotive shops,
oil rigs and industrial manufacturers
Qty
1
S-41
A lubricant with excellent adhesion and heavy viscosity providing a tough
lubrication that will not drop or be thrown off.
CHEMICALS
Lubricants
Cutting Fluid
Features:
• A clear synthetic lubricant for the machining, cutting and grinding
of ferrous and non-ferrous metals
• A concentrated synethetic coolant for metal working applications
• Can be used as is or diluted with up to 40 parts water
• Prevents corrosion
Applications:
• Effective for use in working carbon steel, stainless steel, vanadium,
chrome, molybdenum, nitralloy, titanium and bronze
Description
Cutting Fluid (1 Gallon)
Qty
4
Anti-Seize Copper
Multi-purpose, threaded fastener lubricant, high temperature resistant
Amazing 3-In-1 Product!
1. High-temp anti-seize for nuts, bolts, studs, etc.
2. Premium quality lubricant for bearings, slides, etc.
3. Protective coating for service in highly corrosive environments
The high concentration of colloidal copper compound prevents seizing, galling and pitting
under adverse conditions of extreme temperatures and pressures. Provides excellent
lubricity and electrical conductivity — assuring more accurate torquing and easy assembly /
disassembly of bolts, nuts, studs, etc. Protects parts from rust and corrosion.
Useful temperature range from -300o to 1,800oF.
Features:
•
•
•
•
•
•
Withstands extreme weather conditions
Prevents galling and seizing up to 1,800oF
Enhances and protects most electrical connections
Seals and waterproofs threaded parts
Prevents rust and corrosion
No.
Description
Meets mil spec A-907 (D)
74162
Anti-Seize Copper 14 oz. (396g)
Qty
1
Applications:
For use on Nuts, Bolts, Studs, Screws, Slides, Lugs, Grounding Clamps and
Connections, Battery Lugs and Cables, Keys and Keyways, Pins, Compression
Connectors, Lamp Sockets and Receptacles on Boats, Autos and Trucks, Piping
Couplings, Press Fits, Steam Injection Fittings, Gaskets, Flanges and more.
093008 Rev. 072011
S-42
No.
71172
Lubricants
Penetrating Lubricant
This product represents the latest breakthrough in penetrating lubricant technology. By
combining rapid freezing action with an advanced, rust eating formula, seized or rusted
parts are easily released. Shrinkage of sprayed parts quickly breaks open micro fine
fissures allowing the lubricant to easily penetrate even the toughest rust.
The innovative XA-17TM rust eating technology then dissolves rust making
the job a snap and future maintenance easier as well. This formula contains
no chlorinated solvents or ozone depleters and is nonconductive to 33,000
volts for use around live equipment. The 360° spray valve allows for use in
any position and for access to hard-to-reach areas while the large pad
actuator prevents freezing of fingertips.
CHEMICALS
Fast-Freeze Penetrant
Features:
Advanced Formula Penetrating Lubricant
Freezing Action Breaks Open Rust Barrier
Actually Shrinks Parts for Easy Removal
XA-17TM Rust Dissolving Technology
Nonconductive to 33,000 volts
Ultra low VOC Content and No
Chlorinated Solvents or Ozone Depleters
No.
71132
Description
Fast-Freeze Penetrant 9 fl. oz. (255g)
Qty
1
Applications:
• Ideal for use on most demanding penetrating lubricant applications including
rusted manifold bolts, exhaust flanges, industrial, marine, farm, or other
outdoor exposed equipment
EZ-Reach Oiler
Highest Quality Multi-Use Turbine Oil
093008
This product is the most widely accepted multi-use lubricant available
anywhere in the world and it is packaged in a proven telescoping spout
applicator. It features a paraffin base, it is non-gumming and it can be
used in many high heat applications. It is an ISO 32 (approximately 10
weight S.A.E.) viscosity oil.
Features:
Applications:
•
•
•
•
• Ideal for use on machinery,
most electrical controls, industrial
equipment, blowers, shop tools,
electric motors from 1/3 H.P. to
5 H.P., bushings, shafts, bearings
and all kinds of mechanical linkages
Telescoping spout applicator
Paraffin base
Non-gumming
Can be used in many high heat
applications
No.
74182
Description
EZ-Reach Oiler 4 fl. oz. (113g)
Qty
1
S-43
•
•
•
•
•
•
Safety Glasses – Tomahawks
Ratchet-Action and Extension Adjustment Temples
Lightweight nylon frame with extension
adjustment ensures secure fit
One popular lens style in
three practical frame options!
99.9% ultraviolet
protection lens
with Duramass®
scratch-resistant
coating
S-44
Clear and Gray
lenses available
with Duramass®
AF4 antifog
coating
No.
Frame
Lens
72612
Black
Clear
72620
Black
Gray
72614
Blue
Clear
72616
RWB
Clear
Fully adjustable 5-position,
ratchet-action temples for
maximum comfort
One-piece polycarbonate lens
with integral sideshields provides
increased protection
Safety Glasses – Frostbite 2
No.
Frame
Lens
72628
Black
Gray
Available in Frost
Black nylon frames
Exclusive Duramass®
scratch-resistant coating
Polycarbonate lens
blocks 99.9%
of ultraviolet rays
Trend-setting
square shaped lens
093008
CHEMICALS
Safety Products
Safety Products
CHEMICALS
Black ‘Cudas Straps
TM
Features:
• Conveniently fits safety spectacles
• Hangs comfortably around the neck preventing
spectacles from becoming lost or scratched
No.
Color
Description
72510
Black
Cudas Straps
Visitors Glasses
Features:
Frame
Lens
72638
Clear
Clear
High styled, wide frame with wrap-around lens
Fits easily over prescription glasses
Detachable side shields provides for more comfort
Opaque brow bar provides added protection and
reduces overhead glare
S-45
No.
•
•
•
•
Safety Accessories – DE Ear Plugs
Features:
• Noise Reduction Rating: 29
• Tapered design for better fit
• Softens with body heat to reduce pressure
when in use
• Bright red color helps measure compliance
No.
Description
Qty
72800
DE Ear Plugs
200
Disposable Dust Masks
Features:
093008
•
•
•
•
Adjustable metal nosepiece
Lightweight fiber for comfort
Low profile design
Does not meet NIOSH
No.
Description
Qty
72850
Dust Masks
50
Nitrile Gloves
Features:
•
•
•
•
100% Nitrile (powder-free) gloves
4 mil thick with 9" cuff length and textured grip
Maximum puncture and tear resistance
100% latex free nitrile
No.
Description
Qty
synthetic eliminates
72716 Medium Nitrile Gloves –
1
allergic reaction
Box of 100
to latex
• Excellent resistance to a wide variety of solvents and chemicals
• Ideal for use in shop, maintenance and automotive
Black Nitrile Gloves
S-46
Features:
No.
72700
Description
Qty
Medium Nitrile Black Gloves - Box of 100
1
• New professional black color – no need to
72702 Large Nitrile Black Gloves - Box of 100
worry about them looking dirty or greasy
72704 X-Large Nitrile Black Gloves - Box of 100
• Powder-free – eliminates skin irritation
• Latex-free – for professionals concerned with latex sensitivity
• Provides superior comfort and strength combined
with unsurpassed tactile sensitivity
• 20% thicker – 3 times the puncture resistance of latex or vinyl
• Textured for enhanced dexterity – superior wet or dry grip
• Ideal for use in shop, maintenance and automotive
1
1
Industrial Latex Gloves
Features:
•
•
•
•
•
•
No.
100% pure natural latex rubber
Non-sterile, lightly powdered
Ambidextrous, 5 mil thick
Stretches to fit
Excellent sensitivity & touch
USDA accepted
Description
Qty
72751
Medium Latex Gloves - Box of 100
1
72752
Large Latex Gloves - Box of 100
1
72753
X-Large Latex Gloves - Box of 100
1
PVC Gloves
Features:
No.
Size
Qty
72756
Large
1 Pair
•
•
•
•
•
Premium non-slip grip double dipped finish PVC
Actifresh® treatment reduces odors and eliminates germs
100% cotton jersey lining
14" length
Complies with EN 388:1994 and EN 374-1:1994
010109 Rev. 072011
CHEMICALS
Safety Products
Safety Products
Features:
• Medium weight 65% ramie,
35% cotton blend
• Stretches for comfortable fit
• Matching knit wrist
No.
Size
Qty
72776
Large Medium Weight
1 Pair
CHEMICALS
Brown Jersey Knit Gloves
Premium Full Feature Work Gloves
Features:
• Durable suede leather palm, full leather index finger,
wing thumb, leather fingertips and knuckle strap
• Shirred elastic
No.
Size
• 100% cotton flannel back
72772
Large
• 2-1/2" rubberized safety cuff
Qty
1 Pair
S-47
Cotton String
Dotted Knit Gloves
Features:
No.
Size
Qty
72764
Large
1 Pair
• PVC grip dots on both sides for extended life and grip
• Heavyweight cotton/polyester blend
• Wear on either hand, elasticized wrist
Deerskin Work/Driving Gloves
Features:
010109 Rev. 072011
• Premium smooth grain unlined deerskin
• Buttery soft and flexible, nature’s finest
leather, tailored keystone thumb,
self hem and shirred elastic back
No.
Size
Qty
72780
Large
1 Pair
72781
X-Large
1 Pair
Smooth Grain Pigskin
Work/Driving Gloves
Features:
• Durable, long wearing grain leather
tailored keystone thumb
• Shirred elastic back and self hem
No.
Size
Qty
72796
Large
1 Pair
72797
X-Large
1 Pair
CHEMICALS
Safety Products
Heavy Duty Leather Palm Work Gloves
Features:
• Durable suede leather palm
• Full leather index finger, wing thumb,
leather finger tips and knuckle strap
• Shirred elastic
• 100% Cotton flannel back
• 2-1/2" Rubberized safety cuff
No.
Size
Qty
72730
Large
1 Pair
Split Leather Gloves
Features:
No.
Size
Qty
1 Pair
Mechanics Gloves – High Dexterity
Features:
• High performance mechanics gloves
• Genuine suede deerskin for the
ultimate sense of touch
• Adjustable wrist closure keeps
out debris
No.
Size
Qty
72787
Medium
1 Pair
72788
Large
1 Pair
72789
X-Large
1 Pair
Mechanics Gloves – Heavy Duty Padded
Features:
No.
Size
• Synthetic leather palm is durable,
72791
Medium
breathable and washable
72792
Large
• Gel filled palm patches
72793
X-Large
• Reinforced palm patches and
fingertips
• Stretch spandex back and adjustable wrist closure
• Hang-up loop and soft terry sweat wipe
Qty
1 Pair
1 Pair
1 Pair
Premium Knit Rubber Coated Palm
Features:
•
•
•
•
•
•
No.
Textured natural latex rubber grip palm
72760
Comfortable ergonomic design
72761
Resists cuts, abrasion and puncture
Gray cotton/polyester knit back keeps hands cool
Elasticized wrist
Complies with ASTM F1790-97 and EN 388:1994
Size
Qty
Large
1 Pair
X-Large
1 Pair
010109 Rev. 072011
S-48
• Durable suede leather palm
72784
Large
and straight thumb
• 100% cotton flannel back and navy knit wrist
Spill Response
Sphag-Sorb®
The Solution to Industry’s Toughest Cleanup Problems
Features:
CHEMICALS
Environmentally Safe Industrial Absorbent Products
The finest grade of
sphagnum peat
moss from the
bogs of Canada is
the starting point
for Sphag-Sorb®.
The peat fibers are
separated from inorganic hard
material, then
activated into a
high-grade product
with remarkable
abilities to absorb
and encapsulate oils, solvents, heavy
metals, pesticides, herbicides and all other
organic chemicals.
Sphag-Sorb® is superabsorbent – less is
required for storage and disposal. Since it
is oleophilic (absorbs oil quickly) and
hydrophobic (resists taking on water),
Sphag Sorb® is ideal for a wide range of
industrial and specialized uses. It can
absorb on land, on hard surfaces such as
asphalt or concrete and in drums or tanks.
On the water, it even removes the oil
sheen. Sphag-Sorb® removes contaminants from spill sites upon extraction
because of it's non-leaching and encapsulating charateristics.
The key to Sphag-Sorb's effectiveness is
the natural capillary and porous structure
of the activated peat. This provides a
powerful wicking action, absorbing hydrocarbons, PCB's and
solvents quickly. But
even more important,
these properties allow
it to encapsulate these
liquids on contact.
Sphag-Sorb® securely
takes in the oil, chemical, or solvent, rather
than merely allowing it
Clean Up Is Easy
No "high-tech" application or equipment is
required for a successful clean-up – a
broom or shovel does the job. Sphag-Sorb®
leaves behind no messy residue after
extraction, offering easy application to
both mechanical and manual clean-up.
These properties make Sphag Sorb® ideal
as a first response tool for emergency
containment and clean-up as well as
routine use in maintaining a clean and safe
working environment for manufacturing
plants, warehouses and fabrication or
repair shops.
to temporarily "attach" to the surface of
the product, as does clay.
S-49
100208
• Encapsulates hydrocarbons and
most organic chemicals on contact
• Works on land or water
• Safe and Easy-to-use
• Lightweight
• More absorbent
• Non-Toxic and Non-Leaching
• Vapor Suppressive
Environmentally Safe Industrial Absorbent Products
Sphag-Sorb® – Bags
Sphag Sorb Loose Fill 1 C.F.
• Description: One cubic foot
loose-filled bag
• Absorption:
from 5 to 7 gallons
• Shipping size: six per case
24" x 15" x 30"
• Approximate weight:
65 lbs. per case
(10.8 lbs per bag)
• Palletizing: 15 cases/90 bags
Sphagnum peat moss, the only ingredient
in all-natural Sphag-Sorb.
S-50
Sphag Sorb Loose Fill 2 C.F.
• Description: Two cubic foot
loose-filled bag
• Absorption:
from 12 to 15 gallons
• Shipping size: six per case
32" x 16" x 9"
• Approximate weight:
23 lbs. per bag
• Palletizing: 40 bags
No.
Description
Sphag Sorb®
Industry’s Clean-Up Solution
Sphag Sorb® is an all-natural product
manufactured from sphagnum peat moss,
originating in the bogs of Canada. A labtested, field-proven industrial absorbent,
Sphag Sorb outperforms all other types of
absorbent materials.
Qty
70050
Sphag Sorb Loose Fill 1 C.F. Bag
6
70056
Sphag Sorb Loose Fill 2 C.F. Bag
3
Sphag-Sorb® –
Drums & Pails
Sphag Sorb Loose File 1 C.F.
• Description: One cubic foot
loose-filled plastic pail
• Absorption: from 5 to 6 gal.
• Shipping size: 12" x 12" x 15"
• Approx. weight: 10 lbs. per pail
• Palletizing: 72 pails
No.
70064
Description
Sphag Sorb
Loose Fill 1 C.F. Pail
Qty
1
Sphag Sorb solves the toughest clean-up
problems with a complete line of environmentally safe, industrial absorbent products. Sphag Sorb meets or exceeds all
applicable standards for effective cleanup and disposal of oil, gasoline, fuel, solvents, and nearly every other organic
chemical.
Sphag Sorb – one product, one convenient
solution for a wide range of clean-up and
disposal needs. Sphag Sorb works on land
or water. It is economical, efficient and
easy-to-use, as well as safe, non-abrasive,
non-toxic and non-leaching.
Sphag Sorb is the answer to safe, effective clean-up in an era of environmental
sensitivity and increasingly stringent
regulation.
100208 Rev. 072011
CHEMICALS
Spill Response
Spill Response
Sphag Sorb®
Technical Features:
Meets EPA standards for disposal in
landfills. Sphag Sorb® does not biodegrade
before the substance it encapsulates. In
its natural state, Sphag Sorb® is 100%
biodegradable; but its molecular properties permit it to pass EPA requirements
for landfilling both hazardous and nonhazardous wastes.
High BTU value for incineration. Sphag
Sorb® is equally compatible with other
disposal options. It is ideal for incineration,
(when regulations permit) since it is also
an energy source with the ability to generate some of the heat required for
incineration.
Lower volume of Sphag Sorb® required
means lower disposal costs.
Reduces flammable vapors by 90%.
100208 Rev, 072011
How Sphag Sorb® Compares
with Other Absorbents
Lower moisture, higher quality makes
Sphag Sorb® superior to other
absorbents.
Compared with clay, Sphag Sorb® is:
• 10 times more absorbent
• lightweight
• non-leaching
• safe and non-toxic, contains no silica
• more suited for landfilling and
incineration
Sphag Sorb Absorbent Pad:
• Description: 18" x 18" natural, unbleached
knit-cotton pads filled with Sphag Sorb
• Absorption: from 1 to 1-1/2 gallons
• Shipping size:
30 per case
18.5" x 18.5" x 29"
• Approximate weight:
2 lbs. per pad
(60 lbs per case)
• Palletizing: 13 cases/360 bags
Sphag Sorb Absorbent Pillow:
• Description: 18" x 18" natural, unbleached
knit-cotton pillows filled with Sphag Sorb
• Absorption: from 1-1/2 to 2-1/4 gallons
• Shipping size:
20 per case
18.5" x 18.5" x 29"
• Approximate weight:
3 lbs. per pad
60 lbs. per case
• Palletizing: 12 cases/240 pillows
No.
Description
70070
Sphag Sorb Absorbent Pad
70072
Sphag Sorb Absorbent Pillow
Qty
15
1
Although more effective than clay,
compared with Sphag Sorb® the following
absorbents:
• Diatomaceous Earth
• Alumina Silicate
• Corn
• Cellulose
• Polypropylene
• Polymers
Offer lower absorbency, leach at lower
ratios and have more limited disposal
options.
S-51
Sphag Sorb® will not leach; it passes TCLP
at ratios much lower than competing
absorbents. Due to its porous structure
and affinity for hydrocarbons and other
organics, Sphag Sorb® is a truly nonleaching and suitable for land-filling where
regulations permit.
Sphag-Sorb® –
Pads & Pillows
CHEMICALS
Environmentally Safe Industrial Absorbent Products
Environmentally Safe Industrial Absorbent Products
Sphag-Sorb® – Socks
Natural, unbleached knit-cotton, socks filled with Sphag Sorb, sealed in a plastic sleeve.
Sphag Sorb Sock – 2" x 5’
• Absorption: from 3/4 to 1 gallons
• Shipping size:
40 per case
18.5" x 18.5" x 29"
• Approximate weight:
60 lbs per case
• Palletizing: 12 cases/480 bags
S-52
Sphag Sorb Sock – 2" x 10’
• Absorption: from 1-1/2 to 2 gallons
• Shipping size:
20 per case
18.5" x 18.5" x 29"
• Approximate weight:
60 lbs per case
• Palletizing: 12 cases/240 bags
Sphag Sorb Sock – 4" x 4’
• Absorption: from 1-3/4 to 2-1/3 gallons
• Shipping size:
20 per case
20.5" x 24.5" x 30.5"
• Approximate weight:
70 lbs per case
• Palletizing: 12 cases/240 bags
Sphag Sorb Sock – 4" x 8’
• Absorption: from 3-1/2 to 4-2/3 gallons
• Shipping size:
10 per case
20.5" x 24.5" x 30.5"
• Approximate weight:
70 lbs per case
• Palletizing: 12 cases/120 bags
Sphag Sorb® Absorption
• Triple Screened, high-grade sphagnum
peat moss containing less than 1/2 of 1%
of inert materials.
• Dehydration process results in a high
capillary structure that promotes rapid
wicking and quick clean-up.
• Exceeds Maxiumum Toxicity
Characteristic Leachate Procedure
(TCLP) for environmental safety and
easy disposal.
• Sphag Sorb is superabsorbent.
10 times as effective as clay and 6
times as effective as diatomaceous
earth or alumina silicate-based
absorbents.
• Less product means easier
clean-up, disposal and storage.
• Does not leach after absorption.
Sphag Sorb® eliminates secondary
clean-up and disposal problems.
No.
70066
Description
Sphag Sorb Sock – 2" x 5’
Qty
10
70052
Sphag Sorb Sock – 2" x 10’
5
70060
Sphag Sorb Sock – 4" x 4’
20
70068
Sphag Sorb Sock – 4" x 8’
1
100208 Rev. 072011
CHEMICALS
Spill Response
Spill Response
Sphag-Sorb® – Spill Kits
10 Gallon
Tote Spill Kit
• Description: water-resistant nylon tote
bag containing a spill response kit which
includes:
(4) 18" x 18" Pads
(2) 2" x 5’ Socks
(1) 3/4 cu. ft. loose-filled bag
(2) Disposal bags
• Absorption: from 9 to 13 gallons
• Shipping size: 24" x 10" x 10"
• Approximate weight: 20 lbs per kit
• Palletizing: 42 per pallet
Sphag Sorb® Absorption
Recommendations
100208 Rev. 072011
Recommended Usage: Use approximately 1.5 pounds of Sphag Sorb® per
gallon for quick absorption of lighter
weight cuting oils such as hydraulic fluid,
cutting oils, or transmission fluid. Gasoline
or a 30-weight motor oil require approximately 2 pounds per gallon. Heavy oil
products, such as Bunker C Fuel Oil, may
require 3 pounds per gallon or more. These
estimates are based on subjective but
conservative estimates of effective cleanup to the point that no free liquids remain.
Where immediate pick-up is not required,
Sphag Sorb can be used in ratios lower
than these recommendations for exceptional economy and efficiency. Sphag
Sorb® will contain the spill while its
remarkable wicking action will continue,
over time, to absorb the remaining liquid
until saturated.
Depending upon your requirements and
the liquids you need to absorb, you may
find either more or less Sphag Sorb® is
required for effective clean-up in your
particular application.
55 Gallon
Tote Spill Kit
• Description: 55 gallon UN/DOT-approved
drum containing a spill response kit
which includes:
(10) 18" x 18" Pads
(5) 18" x 18" Pillows
(2) 4" x 4’ Socks
(2) 4" x 8’ Socks
(3) 3/4 cu. ft. loose-filled bags
(3) Tyvek Suits
(3) Pair Nitrile Gloves
(3) Pair Safety Goggles
(5) Disposal bags
• Absorption: from 39 to 54 gallons
• Shipping size: 24" x 24" x 38"
• Approximate weight: 90 lbs per kit
• Palletizing: 8 per pallet
No.
Description
Qty
70074
10 Gallon Tote Spill Kit
1
70076
15 Gallon Tote Spill Kit
1
70062
55 Gallon Tote Spill Kit
1
S-53
• Description:
water-resistant
nylon tote bag containing a
spill response kit which includes:
(2) 18" x 18" Pads
(2) 2" x 5’ Socks
(1) 8 quart loose-filled bag
(2) Disposal bags
• Absorption: from 5 to 7 gallons
• Shipping size: 26" x 14" x 5"
• Approximate weight: 10 lbs per kit
• Palletizing: 42 per pallet
15 Gallon
Tote Spill Kit
CUTTING TOOLS
Environmentally Safe Industrial Absorbent Products
Environmentally Safe Industrial Absorbent Products
Sphag-Sorb® – Spill Kits
Sphag Sorb®
is Versatile
S-54
This list includes some of the common
hydrocarbons and industrial chemicals
that can be effectively absorbed by
Sphag Sorb:
Acetone
Acetone Cyanohydrin
Acetonitrile
Acrolein
Allyl Chloride
Amyl Acetate
Benzene
Bromodichloromethane
Bromoform
Bunker C Fuel Oil
Butanol
2-Butanone
Butyl Acetate
Butyric Acid
Canola Oil
Carbon Disulfide
Carbon Tetrachloride
Chloroform
Chloromethane
Chlorobenzene
Corn Oil
Cresol
Cutting Oils
Cyclohexane
Dichlorobenzene
1,2 Dichloroethene
1-1 Dichloroethylene
Dichloromethane
Diesel Fuels
2-4 Dinotrotoluene
Ethanol
Ethyl Benzene
Ethyl Ether
Ethylene Glycol
Gasoline
Heptane
Hexane
Hexachlorobenzene
Hexachlorobutadiene
Hexachloroethane
Hexene (97%)
Isobutanol
Isoprene
Isopropanol
Jet Fuels
Kerosene
Methanol
Methylene Chloride
Methyl Ethyl Ketone
Methyl Methacrylate
Methyl Phenol
Motor Oils
Napthalene2
Nitoaniline
Nitrobenzene
Oil Base Paint
Oil Base Ink
Paraffin OIl
Pentane
Pentachlorophenol
Petroleum Ether
Phenol
Propanol
(48% in Acetone)
Pyridine
Silicone Oil
(100 cs)
Styrene
Tetrachloroethane
Tetrachlorotethylene
Tetrahydrofuran
Toluene
Trichloroethylene
Trichlorophenol
Triethylamine
Varsol
Vinyl Acetate
Vinyl Chloride
Xylenes
Most organic solvents
Most acids and bases
14 Gallon
Drum Spill Kit
• Description: 14 gallon UN/DOT-approved
drum containing a spill response kit
which includes:
(2) 2" x 5’ Socks
(2) 2" x 10’ Socks
(2) 3/4 cu. ft. loose-filled bags
• Absorption: from 12 to 15 gallons
• Shipping size: 15" x 15" x 27"
• Approximate weight: 25 lbs per kit
• Palletizing: 27 per pallet
25 Gallon
Drum Spill Kit
• Description: 25 gallon UN/DOT-approved
drum containing a spill response kit
which includes:
(5) 18" x 18" Pads
(2) 18" x 18" Pillows
(2) 4" x 4’ Socks
(1) 4" x 8’ Socks
(1) 3/4 cu. ft. loose-filled bags
(2) Tyvek Suits
(2) Pair Nitrile Gloves
(1) Pair Safety Goggles
(3) Waste Disposal bags
• Absorption: from 18 to 264 gallons
• Shipping size: 21" x 21" x 26"
• Approximate weight: 50 lbs per kit
• Palletizing: 12 per pallet
No.
Description
Qty
70054
12 Gallon Drum Spill Kit
1
70058
25 Gallon Drum Spill Kit
1
100208 Rev. 072011
CHEMICALS
Spill Response
Spill Response
CHEMICALS
Dam It All
A Plug and Dike Product
Dam It All is a non-toxic, nonflammable blend of high
absorption polymers in a blended bentonite base that forms
an immediate seal. It has been used for over 15 years by
fire departments, transportation companies, and industrial
operations.
Features:
• Seal off fuels, solvents, and many other chemicals
• Seals immediately
• Sticks to dirty crumpled surfaces even with the fluid flowing out
No.
Description
Qty
70154
Dam It All
1
24" x 16"
Features:
100208 Rev. 072011
• Seals even if the surface is dirty and rough
• Just lay it over drains, sewer inlets, or in front of curb
culverts to seal off and prevent the spill from entering
• Available as a non-stock item only
No.
Description
Size
Qty
70156
Haz-Mats
24" x 16"
1
S-55
Haz-Mats
CHEMICALS
Welding Products
Silver Bearing Solder
Low Temperature
The highest strength, lowest melting point silver solder alloy for stainless steel, dissimilar
metals and chrome plating available in coil or syringe paste.
Features:
• 500% stronger than common solders
• Superior corrosion resistance with bright, shiny deposits
Applications:
Stainless escalator parts
Chrome plating
Electrical connections
Air pressure tubing
Hospital equipment
No.
Description
Qty
71432
2 oz. Syringe
1
71430
9 ft. x 1/16 Coil
1
•
•
•
•
•
Copper tubing
Water pipes
Gas lines
Stainless tables, pans, vats, vessels
Dissimilar metals
Hot Shot Butane Torch
Features:
• 5-1/4 high with a 2500oF flame
• Refillable
• Ideal for all types of professional use
No.
Description
Qty
83721
Butane Torch
1
Solder Combos
One of our bestselling assortments just got better!
Solder Combos available in any combination. Two of our
Low Temperature Silver Bearing Solder in coil, paste, or one
of each and includes the HOT SHOT BUTANE TORCH!
Assortment No. 96805
Assortment No. 96807
No.
Description
Qty
No.
71432
2 oz. Syringe
1
71430
9 ft. x 1/16 Coil
1
71430
9 ft. x 1/16 Coil
1
83721
Butane Torch
1
83721
Butane Torch
1
Description
Qty
100208
S-56
•
•
•
•
•
Welding Products
Heat Resistant Material for Insulating and Positioning Parts for Welding
Can’t get that part to stay in place? Is heat distortion a problem? Then just say “DAM–IT!”
DAM-IT is a new product specially designed to handle these types of problems and more.
DAM-IT easily holds or positions small and difficult to align parts for welding, brazing or
soldering. It is an easy to mold compound that can be used as a heat dam and insulator to
protect metal and other material from the effects of heat. The dough-like consistency of
DAM-IT makes it easy to mold around intricate parts. It will adhere to most surfaces making
it ideal for use as a jigging fixture or insulator for parts to be welded and it will not distort
or shrink when heated.
CHEMICALS
“Dam It” Handy Jig
Features:
Easy to use
Adheres to most surfaces
Withstands temperatures to 3000°F
Maintains shape when heated
Asbestos-free and non-toxic
Reusable
Helps prevent heat distortion
Can be reconstituted using water
Applications:
• Can be used as a heat sink to absorb heat and avoid surface distortion on
heat sensitive parts
• Can also be used as a heat dam to prevent heat from traveling to areas that can
be damaged by heat, such as seats, gaskets, glass and wiring
• Prevents discoloration and will keep distortion down when welding on light gauge metals
such as stainless steel
• Ideal for positioning or holding difficult to align parts
100208
No.
71634
Description
“Dam It” Handy Jig
Qty
1
S-57
•
•
•
•
•
•
•
•
CHEMICALS
Welding Products
VINCULUM
“The Connecting Medium”
Premium quality arc welding electrodes
Researched and engineered to meet the
maintenance welder’s total needs
Precisely formulated, coated electrodes
for the welding of virtually all metals
S-58
•
•
•
•
•
•
•
Cast iron
“Problem” steels
Aluminum
Hardfacing
Stainless steel
Dissimilar metals
Cutting electrodes
VinculumTM means connecting
Standard “off the shelf” welding electrodes are mass
produced for the limited demands of production welding!
Production welding has been greatly simplified!
1.
2.
3.
4.
The metals being used are clean.
Special jigs and fixtures are used for ease of application.
Production welding matches a single electrode to a metal of known analysis.
Day after day welding on the same job makes production welding easier.
VinculumTM is formulated for the multiple problems of maintenance
welding . . . produces faster, easier, stronger, x-ray quality welds!
Maintenance welding is still extremely complex!
Unlike production, the maintenance welder must often weld rusty, oily, or painted metals.
Many welds must be made in hard to reach places with poor fit-up.
The exact chemistry of the metals being welded is seldom known.
The repair or maintenance welder must weld cast iron one day and stainless, tool, or
alloy steels another day, with equal skill . . . every job is different and difficult.
VinculumTM is made only for maintenance welding!
100208
1.
2.
3.
4.
Welding Products
TM
Vinculum
Karalloy
Bowman
EZ-ARC-80-MS Gricon 33 500
–
885
EZ-ARC 123-DS Grinox 29 600
Super
Tensile
990
680
680CGS
Grooving
Cutting
920
Grilumin 14 400 Aluminum
Alloy
Groovy
Alum-alloy
MG#
Gricon 53 570
Grisil 1
130
Eutectic
Lawson Certanium
Beautyweld 350
X-Ergon
Rockmont MechChoice
701
104
Tartan A
Torque II
300
707
770
100
1000
Exotrode
100
100
161
Electa
Torque
Gouge-cut
980
2101
2109
450
608
141
Neptune A
Torque
Aluminum
Nickel
Silver FC
914
16/185
400
70/87
Brutus A Torque IV
AA
201
Brutus G
202/271
Stainless
Grinios 2 650
–
895
Stain B
–
710
121
123
Fix-a-Cast
Gricast 89 289
–
880
2233
200
889
–
770
6006
–
247/250
716
Omega N
–
66
–
703/704
103
Polaris A
–
Hi-abrasion
Gridur 18
770 Abrasion II
Low Hydro
Gricon 15 540 Posi-Weld 25160
Gemini A
–
Torque XI
Jupiter A Torque VI
S-59
100208
Braze-alloy
MG Name
“The Connecting Medium”
CHEMICALS
VINCULUM
Vinculum Welding Products
Comparison Chart
4-Pack Vinculum
MRO Assortment
“The Connecting Medium”
Assortment No. 96804
A complete set of electrodes for the maintenance and repair welder
4 different welding alloys – 2 lbs. each for a total of 8 lbs.
Packaged in our Resealable Welding Boxes
EZ-ARC-80-MS 1/8
Easy-to-use all-position
electrode for mild steel
S-60
VINCULUM
Technical Data:
Tensile Strength:............ up to 80,000 psi
Yield Strength: ................. up to 68,000 psi
Elongation: ................... approximately 24%
Current: ............................................ AC or DC +/Amperage: .................................................. 60-125
FIX-A-CAST 1/8 NC
Maximum strength alloy
for all cast irons
Technical Data:
Tensile Strength:............up to 75,000 psi
Hardness: ....................................... Brinnell 210
Current: ................................................... AC or DC
.................... Reverse Polarity (Electrode +)
Amperage: ................................................... 70-115
GROOVY 1/8
Excellent gouging and chamfering
electrode for weld preparation
Technical Data:
Current: ....... AC or DC Straight Polarity
Amperage: ............................................. 210-350
EZ-ARC-123-DS 1/8
Superior problem-solving
electrode for all steels
Technical Data:
Tensile Strength:
as welded ...................... up to 120,000 psi
work hardened .......... up to 180,000 psi
Yield Strength: ................ up to 90,000 psi
Elongation: .................. approximately 28%
Hardness (HB):..........approximately 300
Current: ................................................... AC or DC
....................Reverse Polarity (Electrode +)
Amperage: ................................................. 65-120
100208
CHEMICALS
Welding Products
Welding Products
“The Connecting Medium”
Premium General Purpose Alloy
For Low Carbon Steels
AC or DC
All Position
CHEMICALS
VINCULUM
EZ-ARC-80-MS
Also available in 4-Pack Assortment 96804
VINCULUM™ EZ-ARC-80-MS is designed to operate on all welding machines, even small AC
type transformers when the open circuit voltage is very low. The specially formulated
coating protects the deposit from adverse conditions normally encountered in maintenance
welding. An ideal electrode for field repair work and out of position welding.
Features:
S-61
• Low amperage electrode – controls distortion
• Minimum spatter and easy slag removal – fast cleanup – saving time
Applications:
• Use for fabrication of thin, medium, heavy and dissimilar gauge mild steel
• Machine parts, sheets and angle iron, beams, filling holes, pipes, build up
Procedures:
As much foreign material as practical should be removed from the weld area. Deep penetration can be accomplished by using DC reverse polarity (electrode +). Limited penetration and
a flatter bead will result from using DC straight polarity (electrode -). Arc blow can be prevented by using AC. Maintain medium arc length with either stringer or weave beads. Slag
can be easily removed with a light chipping hammer.
Technical Data:
100208 Rev. 072011
Tensile Strength: .................................. up to 80,000 psi
Yield Strength: ........................................ up to 68,000 psi
Elongation %: ..................................................... approx. 24%
Current: ...................................... AC or DC either polarity
Color: ............................................................................................ Gold
No.
71530
Dia.
3/32
Amperage
35-80
Qty
5 ea
71532
1/8
65-125
5 lbs
71534
5/32
90-160
5 ea
CHEMICALS
Welding Products
VINCULUM
Diverse-Alloy
“The Connecting Medium”
Premium High Strength Electrode for
Welding High Strength Low Alloy Steels and
Abrasion Resisting Plate
AC or DC
Reverse Polarity (Electrode +)
Features:
•
•
•
•
•
100,000 PSI
• Machineable
Rapid deposition
• 30% elongation
High impact resistance
• Torch cuttable
All position
• Crack-free X-ray quality deposits
These features combine to offer reduced failure and labor costs plus maximum use of
your valuable maintenance dollar
Applications:
• Use for welding high strength low alloy (HSLA) steels and AR plates to themselves and in
dissimilar combinations where good ductility is desired even at low temperatures
• Use on any carbon or HSLA steel application where high tensile strength and ductility are
desired
• Excellent for steel fabrication and pipe welding
Procedures:
Prepare weld by removing any fatigued metal. Bevel or chamfer heavy sections to a 90° vee.
Short arc gap should be maintained. Use weave technique working from bottom up for
vertical welding. Use stringer beads or slight weave on flat and horizontal fillets, but avoid
whipping. Remove all slag between passes.
Technical Data:
Tensile Strength: .... up to 93,000 psi (70 kg/mm2)
Elongation %: ..................................... approximately 32%
Current: .................................. AC or DC reverse polarity
....................................................................................... (Electrode +)
No.
Dia.
Amperage
mm
Qty
71562
3/32
60-100
2.5
5 ea
71564
1/8
100-150
3.25
5 lbs
71566
5/32
140-200
4.0
5 ea
100208 Rev. 072011
S-62
This superior quality, low-hydrogen electrode is the welder's choice for high strength,
machinability and affordability. DIVERSE-ALLOY is excellent for welding most high-strength
low alloy steels. It is recommended for the repair of heavy equipment and joints subjected
to high stresses because of its high strength. The moisture resistant coating assures dense,
crack-free deposits for outstanding impact resistance at all temperatures, and X-ray quality
welds. This makes DIVERSE-ALLOY the ideal electrode for wear plate, steel fabrication and
pipe welding. Engineered flux provides the flexibility of all position welding. DIVERSE-ALLOY
deposits are easily cut with a torch and machinable for machine parts repairs.
Welding Products
VINCULUM
“The Connecting Medium”
If broken bolts, taps, drills or E-Z Outs are a problem . . .
Flush with
surface . . .
Deep down
in hole . . .
CHEMICALS
EZ-ARC-123-DS Welding Rod
or complicated by
broken drill bits,
E-Z outs or taps
The VinculumTM EZ-ARC-123-DS Welding Rod is the Answer!
S-63
Assortment No. 96803
3 different welding alloys - 1 lb. each
Packaged in a Resealable Welding Box
Includes 5/64, 3/32 and 1/8 alloys
100208
• Place Hi-Alloy
rod in center
of hole
• Strike an arc
• Keep rod tip
in weld puddle
• Fill hole with
weld deposit
• Weld washer
to build-up at
surface of
housing
• Weld a nut to
the washer
• Allow to cool
• Use a wrench
to remove the
broken bolt
CHEMICALS
Welding Products
VINCULUM
EZ-ARC-123-DS Welding Rod
“The Connecting Medium”
A Superior Super Strength Electrode
for Welding Alloy and Dissimilar Steels
AC or DC Reverse Polarity
All Position
The perfect choice for removing broken bolts, studs, taps & E-Z outs!
Also available in 4-Pack Assortment 96804
VINCULUM™ EZ-ARC-123-DS is designed to weld low, medium and high alloy steels where
super strength and high quality welds are desirable.
Features:
• Replaces large size E-Z outs
• Less errors and guess work
Welds:
• Low, medium and high alloy steels
• Stainless steel to carbon steel
• Any combination of weldable steels
• Spring steels
• Stainless steel
• Cast steels
• Carbon steels
• Manganese
• Tool and die steel
Applications:
•
•
•
•
Camshafts
Scraper teeth and arms
Excellent underlayment prior to hardfacing
Drive Shafts
Procedures:
•
•
•
•
•
Crane booms
Shovel buckets
Gears
Dies
Rollers
Remove all foreign material from joint area. Heavy sections should be beveled to form a 90°
vee. High carbon steel should be preheated to 400° F (204°C). Maintain alignment by use of
jigs, fixtures and tack welds. Use stringer beads to prevent overheating and maintain a short
arc. Allow to cool prior to removing slag.
Technical Data:
Tensile Strength:
as welded ........................... up to 120,000 psi
work hardened .............. up to 180,000 psi
Yield Strength: ..................... up to 90,000 psi
Elongation: ........................approximately 28%
Hardness (HB): .............. approximately 300
Current: ............. AC or DC Reverse Polarity
.................................................................... (Electrode +)
Color: .......................................................................... Blue
No.
Dia.
Amp
Extracts Bolt
Qty
71536
5/64
25-55
5/16
5 ea
71538
3/32
40-80
3/8
5 lbs
71540
1/8
65-120
1
5 lbs
71542
5/32
90-150
2-1/2
5 ea
100208 Rev. 072011
S-64
• Used for broken stud removal
• Joins any stainless to carbon steels
Welding Products
“The Connecting Medium”
Premium Aluminum Electrode
with Extruded Coating
DC Reverse Polarity
CHEMICALS
VINCULUM
Alum-Alloy
VINCULUM™ ALUM-ALLOY is a premium aluminum electrode for arc welding aluminum and
aluminum alloys. Produces strong, dense porosity free welds on production or maintenance
applications.
Features:
• Low amp electrode for minimum spatter, burn through and fuming
• Can be used as oxy-acetylene brazing rod
• Reduces inventory – saving money
Applications:
Transmission cases
Foundry castings repairs
Foundry patterns
Repair of machinery errors
Extruded aluminum
•
•
•
•
•
Pipes
Shelves
Ladders
Tanks
Cast aluminum
S-65
•
•
•
•
•
Procedures:
Clean weld area. A bevel of 70° - 90° should be used on parts 1/8 or heavier. Preheat is not
necessary on thin gauges but faster, flatter, smoother beads are produced on heavier sections when they are preheated to approximately 400°F. The electrode should be held vertical
to the work piece; maintain a short arc and slag should be removed between passes. Restrike
arc on existing weld deposits. Part should be allowed to cool slowly, slag should be chipped
off before quenching. Complete slag removal is accomplished by using a wire brush with a
10% sulfuric acid and hot water solution. Rinse with clean hot water.
Technical Data:
100208 Rev. 072011
Tensile Strength: as welded ......... up to 34,000 psi
Elongation: ................................... approximately 15-25%
Hardness (HB): ........................................................... 40 to 55
Current: ................ DC Reverse Polarity (Electrode +)
Color Match: ............... Good (will darken if anozided)
Color: .......................................................................................... White
No.
Dia.
Amperage
Qty
71546
1/8
80-130
5 lbs
CHEMICALS
Welding Products
VINCULUM
Braze-Alloy
“The Connecting Medium”
High Strength Brazing Alloy
Torch or Induction
VINCULUM™ BRAZE-ALLOY is a premium grade, flux coated, high strength alloy for general
maintenance repair with a torch. It is an excellent choice for the build-up of parts
subjected to high frictional wear and to repair gears with broken teeth. Also, at slightly
higher temperatures its exceptional thin flow characteristics make it ideal for repairing
broken bits, attaching carbide tips, etc.
Low Temperature – Build up of:
• Valve seats
• Wedge bars
• Steering knuckles
• Gear teeth
• Reamers
• Shafts
• Nearings
High Temperature:
• Tool steel
• Cast iron
• Alloy steels
• Brass-Copper
• Galvanized iron
• Thin sheet metal
Procedures:
Clean joint area. This thin flowing alloy will have maximum strength with a joint clearance of
.001" to .003" Using a neutral flame, heat the part uniformly until the flux is liquefied. Add
sufficient alloy to fill the joint. Additional passes can be applied without the need to remove
flux residue from previous passes. Allow the part to cool slowly. Remove the flux by chipping and wire brushing.
Technical Data:
Tensile Strength: as welded ........ up to 113,000 psi
Hardness (HB): ...................................................... 140 to 200
Working Temperature: ..................... 1400oF to 1750oF
Remelt Temperature: ............ approximately 1800oF
Color: .............................................................................................. Red
No.
Dia. x Length
Qty
71548
3/32 x 1/8
5 lbs
71550
1/16 x 18
5 ft
71552
1/8 x 18
5 lbs
100208 Rev. 072011
S-66
Applications:
Welding Products
VINCULUM
“The Connecting Medium”
56% Silver, Cadmium Free
for Joining Ferrous and Non-Ferrous Metals
Torch, Furnace or Induction
CHEMICALS
“Quicksilver” Brazing Alloy
VINCULUM™ “QUICKSILVER” BRAZING ALLOY features an exclusive thermal flux coating that
makes this high silver, cadmium free brazing rod unique. The flux provides excellent cleaning
action on most metals and does not blacken. It is ideal for food and pharmaceutical
applications since it is cadmium free.
Applications:
• Used in the food and dairy industry for joining stainless steels
• Ideal for general maintenance and repair
• For the repair and assembly of laboratory apparatus, control devices, instruments, tubing,
trim work, switches, etc.
Joint must be clean. For maximum strength, joint clearances should not exceed .003".
Maintain alignment by use of fixtures and jigs. Heat parts broadly with a slightly carburizing
flame. Place thermal flux on the heated joint. When the flux becomes clear and fluid, melt a
small amount of alloy onto the joint. Continue heating until the alloy flows into the joint. Base
metal must not be over-heated. After part has cooled slowly, remove flux residue with
warm water.
Technical Data:
093008 Rev. 072011
Tensile Strength: ................................... up to 76,000 psi
Working Temperature: ......... approximately 1220oF
Corrosion Resistance: .................................................. Good
Color Match: ............................. Good on stainless steel
Electrical Conductivity: ................................................ Good
Elongation %: ......................................... approximately 22
No.
Dia. x Length
Qty
71632
1/16 x 18
6 ft
71630
3/32 x 18
5 ft
S-67
Procedures:
CHEMICALS
Welding Products
VINCULUM
MRO Stainless
“The Connecting Medium”
Universal Stainless Steel Electrode
AC or DC Reverse Polarity
All Position
VINCULUM™ STAINLESS is a premium high quality, low carbon, general purpose stainless
steel electrode that has excellent welding characteristics.
Features:
•
•
•
•
•
A very smooth and easy to control arc in all positions
Outstanding strike and restrike features
Easy slag removal
Designed to prevent carbide precipitation
Welds 302, 304, 308, 316L and 347 stainless steels
• Normally used for the following fabrication and repair of tanks, household appliances,
pipes, boilers, fittings, food, dairy and chemical equipment
Procedures:
All foreign material must be thoroughly cleaned from weld area. Parts thicker than 3/16:
should be beveled to a 60° vee. Preheat is not recommended. Tack welds may be necessary
to maintain alignment. Maintain a medium to short arc with electrode tilted 15° in the direction of travel. Excessive heat build-up must be prevented.
Technical Data:
Tensile Strength: .................................up to 100,000 psi
Yield Strength: ......................................... up to 62,000 psi
Elongation %: ..................................... approximately 40%
Hardness (HB): ................................... approximately 180
Current: ................................. AC or DC Reverse Polarity
....................................................................................... (Electrode +)
Corrosion Resistance: .................................................. Good
Color: ............................................................................................ Gray
No.
Dia.
Amperage
Qty
71688
1/16
25-75
5 ea
093008 Rev. 072011
S-68
Applications:
Welding Products
“The Connecting Medium”
Premium High Speed Gouging
and Chamfering Electrode
AC or DC Straight Polarity
All Position
Also available in 4-Pack Assortment 96804
CHEMICALS
VINCULUM
Groovy
VINCULUM™ GROOVY is designed to remove metal fast and efficiently without special skills
or special equipment, expensive gases or compressed gas.
Features:
Special coating for a forceful arc blow
Restrike capability is excellent
Cut is smooth and uniform from all positions
Eliminates need for compressed air or oxygen
Easy to use – time saver
No special skills required
Cuts cast iron, maganese, aluminum, bronze, stainless steel, carbon steel, copper & nickel
Applications:
• Can be used to remove unwanted or defective weld metal, to prepare parts prior to
welding, to remove risers and reduce large area of metal prior to machining
Procedures:
Use DC straight polarity (electrode -) for clean, high speed cuts. The electrode should be
held at a low angle to the work piece (10° - 15°). With the electrode pointed in the direction
of desired groove, strike the arc and push the electrode as fast as the metal is removed.
A short arc should be maintained. The maximum depth of the groove should not be greater
than the diameter of the core wire. For deeper grooves use multiple passes.
Technical Data:
093008 Rev. 072011
Current: ................................. AC or DC Straight Polarity
...................................................................................... (Electrode –)
Color: ............................................................................................ Gray
No.
Dia.
Amp
Qty
71543
3/32
100 - 170
5 lbs
71544
1/8
210 - 350
5 lbs
S-69
•
•
•
•
•
•
•
CHEMICALS
Welding Products
VINCULUM
Hi-Abrasion
“The Connecting Medium”
Premium Hard Surfacing
Electrode for Severe Abrasion
AC or DC Reverse Polarity
VINCULUM™ HI-ABRASION is designed for parts subjected to severe abrasion and light
impact. Also for surfaces that must resist abrasion combined with scaling.
Features:
High deposition rate
Self releasing slag
Excessive dilution with base metal easily prevented.
High chromium content to maintain abrasion resistance
Smooth beads
Easily controlled arc
Applications:
• Equipment for processing coal, rock,
soil, cement and ceramic matter
• Grinding plates
• Conveying chains
• Open-hearth tools
•
•
•
•
Earth augers
Annealing furnaces
Earth scrapers
Rock crushers
Procedures:
All unsound metal or foreign material should be removed from the surface to be welded.
An elastic cushion layer should be applied before surfacing for best results. On carbon and
manganese steel use VINCULUM™ HI-ALLOY. When making the final surface, keep the electrode vertical to the work piece and maintain a short arc. Thin deposits never more than
two layers thick should be used. Alternate welding area to prevent excessive local heat
build-up. Allow part to cool slowly.
Technical Data:
Hardness .................................................................. RC 56 - 60
Current: ................................. AC or DC Reverse Polarity
....................................................................................... (Electrode +)
Color: ............................................................................................ Gray
No.
Dia.
Amp
Qty
71558
1/8
80 - 125
5 ea
71560
5/32
100 - 160
5 ea
093008 Rev. 072011
S-70
•
•
•
•
•
•
Welding Products
“The Connecting Medium”
Premium Non-side Arcing
Electrode for Welding Cast Iron;
Maximum Machinability
AC or DC Reverse Polarity (Electrode +)
Also available in 4-Pack Assortment 96804
CHEMICALS
VINCULUM
Fix-A-Cast NC
VINCULUM™ FIX-A-CAST NC is the ideal electrode for welding in areas where the side of the
electrode comes in contact with the part being welded and side arcing can't be tolerated.
The specially coated electrode gives a deposit that is also easily machined.
Applications:
Procedures:
Pre-heating or post-heating will not be necessary in most cases but in cold weather when
special machining qualities are desired, the part should be preheated to 400°F (204°C).
Stresses and cracks can be reduced by the use of stringer beads, intermittent welds or by
peening while still hot. Allow part to cool slowly.
Technical Data:
093008 Rev. 072011
Tensile Strength: ................................... up to 50,000 psi
........................................................................................ (35 kg/mm2)
Hardness ................................................ approximately 150
Current: ................................. AC or DC Reverse Polarity
....................................................................................... (Electrode +)
Color: ........................................................ Similar to Cast Iron
No.
Dia.
Amp
Qty
71696
3/32
40 - 75
5 ea
71698
1/8
65 - 115
5 ea
71700
5/32
100 - 150
5 ea
S-71
• Joining of regular grades of gray cast iron to themselves or other iron alloys
• Designed for welding on light and medium sized castings, either joining or build-up, where
maximum machinability is needed
• Ideal for repair on thin sections of cast iron
CHEMICALS
Welding Products
VINCULUM
All Position Stainless
“The Connecting Medium”
Special Vertical Position
Stainless Steel Electrode
Features:
• Unique “Fast-Freeze” coating simplifies vertical down and up welding
• Ideal for poor fit-up joints in all positions
• Controlled weld puddle allows for filling holes on stainless steels
AWS/ASME IIC SFA 5.4 E 316L-16
DIN 8556 E19123L R 23
ISO 3581 E19.12.3L R 23
BS 2926 - 1984 19.12.3L R
INTERNATIONAL
SPECIFICATIONS
• Especially suited for vertical down and up welding of thin to medium gauge molybdenum
bearing stainless steels
Microstructure:
• Austenite with 3-9% ferrite – typical ferrite number is 6
All Weld Metal Analysis (Typical Weight %):
C
Mn
Si
S
P
Cr
Ni
Mo
Cu
Fe
.018
.9
.75
.01
.02
19
12
2.65
.1
bal
Welding Techniques:
For vertical welding, set amperage at high end of the scale. Maintain a sharp angle with the
electrode pointing upward. Whip the electrode quickly back and forth while moving up or
down. Electrode may show a red color from the excess amperage which is normal.
Technical Data:
Tensile Strength: ................................... up to 80,000 psi
Yield Strength: .........................................up to 56,000 psi
Elongation %: .......................................................................... 42%
Hardness: .......................... Rockwell B96, Brinnell 209
Current: ............................................... DC Reverse (+) or AC
Welding Positions: ................................. Flat, Vertical Up,
.............................. Vertical Down, Horizontal, Overhead
Color: ........................................................................................... Ivory
No.
Dia.
Amp
Qty
71690
5/64 x 12
35 - 55
5 ea
71692
3/32 x 12
60 - 80
5 ea
71694
1/8 x 14
90 - 110
5 ea
093008 Rev. 072011
S-72
Applications:
Single-Use Packets – Lubricants
CHEMICALS
Belt-Ease® Belt Dressing
Eliminate squeaks and slipping that can occur with V-belts on the pully
surface. Belt-Ease has an adhesive quality that gives the belt more grip –
doing away with annoying noises and increasing the life of the belt.
Features:
• Eliminates belt noise
• Extends belt life
Applications:
• Apply by pressure spray to the contact sides of the belt and/or to the
pulley. Safety Precaution: Motor should be turned off during application.
• Remove from car fender or other surface by use of naphtha, gasoline,
or chlorinated solvent.
No. 70801
4 gm. Pouch
PKG: 10 Packets
Use everywhere around the battery/cable connection to prevent acid
related corrosion that decreases battery life and saps power. Apply to
battery terminals, cable ends, clamps, connectors, hold-downs, and more.
Features:
• Ensure maximum battery power
• Battery and cable protection
• Anti-corrosion
No. 70802
4 gm. Pouch
PKG: 10 Packets
Applications:
• Battery Terminal Protector
Compound forms a stable
moisture barrier to prevent
corrosion of terminals and
connectors.
Bulb Grease
Avoid the corrosion that can occur on bulbs and other electrical
connections. When that hard to reach bulb burns out – removal will be a
snap. Use on: Taillights, Head Lamps, Light Bulbs, Flood Lights and more.
093008 Rev. 072011
Features:
• Prevents corrosion
• Eases replacement
Applications:
• Protects and seals out moisture when
used on cars, trucks and marine, where a
good clean electrical connection is needed.
• Applying a thin film of BULB GREASE around
the base of the bulb will lock moisture out
and keep the bulb from becoming stuck or
corroded.
No. 70804
4 gm. Pouch
PKG: 10 Packets
S-73
Battery Terminal Protector
Brake Lubricant
100% pure silicone formula that can be applied to the entire brake
assembly. Prevents brake squeal that can occur in metal-to-metal
contact. Also increases brake-life by protecting and lubricating all
critical braking components.
Features:
S-74
• Formulated for optimal performance
for all braking systems
• Protects and seals out moisture,
where other types of lubricants may
deteriorate the rubber parts causing
failure
• Eliminate brake squeal
• Prevents corrosion
• Hi-temp formula – won’t melt!
Applications:
• Recommended for stopping
pad squeal, caliper slides,
No. 70803
back-side of disc pads, for
4 gm. Pouch
ease of rebuilding & assembly,
PKG: 10 Packets
backing plate contacts, for
lubricating caliper piston bores,
anchor & slider bolts, adjusters,
and parking brakes.
Thread-Magic® Anti-Seize
An anti-seize lubricant for maintaining the threads within cast iron and
aluminum cylinder heads. Designed for threads of spark plug bodies,
but excellent for any bolt subject to high heat that may need to be
removed.
Features:
No. 70820
4 gm. Pouch
PKG: 10 Packets
• Easier plug installation
• Prevents sticking for
easy removal
• Superior nickel content
formulation
Applications:
• Prevents metal seizing and galling
during disassmbly
• Especially suited in the prevention of
spark plug breakage due to seizing up
over long service life
• Ideal for aluminum and cast iron
components
Wheel Bearing Grease
(Grease-a-Bearing®)
Just enough grease to complete two wheel bearings or one axle. This
high temp, high pressure, water resistant grease is great for boat
trailers, cars, universal joints, chassis, etc.
Features:
• High temperature
• High pressure
• Water resistant
Applications:
• Great for boat trailers, cars,
universal joints, chassis, etc.
No. 70821
2.82 oz. Pouch
PKG: 10 Packets
093008 Rev. 072011
CHEMICALS
Single-Use Packets – Lubricants
Single-Use Packets – Adhesives/Sealants
Just enough epoxy gel to complete most small fixes and repairs. Can
be used on wood, metal, glass, plastic and ceramics. Unique seal inside
the packet is broken and epoxy is mixed inside before use. Avoids the
mess and waste of standard epoxy packages.
Features:
• 5 minute set
• No mess – use and dispose
Applications:
• Use on wood, metal, glass,
plastic and ceramics
CUTTING TOOLS
Epoxy Gel
No. 70811
2-Part Mix in Pouch
PKG: 10 Packets
EZ-Seal Gel Adhesive/Sealant
TM
S-75
An all-purpose clear RTV gel silicone. A flexible waterproof, and clear gel
that can be used as an adhesive or sealant on metal, plastic, vinyl, tile,
wood, porcelain, glass, rubber, marble, pottery, etc. Contains just enough
material for most small fixes and repairs.
Features:
• 100% gel silicone
• Clear and waterproof
Applications:
• Use on metal, plastic, vinyl,
tile, wood, porcelain, glass,
rubber, marble, pottery, etc.
093008 Rev. 072011
No. 70812
.25 oz. Pouch
PKG: 10 Packets
CHEMICALS
Single-Use Packets – Adhesives/Sealants
Power Glue 2
TM
A 100% urethane formula adhesive for both outdoor and indoor use.
Comes with 2 “Disposable Singles” applications that are just the right
size for most small projects and repairs. Use on wood, stone, metal,
ceramics and more. 100% waterproof with a super strong bond.
Features:
• Waterproof, stainable, paintable
• Indoor/outdoor, sandable
• Fills gaps
Applications:
• Use on wood, stone, metal,
ceramics and more
No. 70813
2 Application Pouch
PKG: 10 Packets
The only adhesive you need! An all-purpose contact adhesive for use
on wood, plastic, metal, rubber, glass and vinyl. Avoids instant bonding,
allowing more time to align. Completely weatherproof and superstrong final bond.
Features:
• All purpose adhesive
• No “instant bonding” allowing
time to align
• Strong and weatherproof bond
Applications:
• Use on wood, plastic, metal
rubber, glass and vinyl
No. 70814
3 Application Pouch
PKG: 10 Packets
093008 Rev. 072011
S-76
Supra-Glue