EM-10 Electronic Slide Bolt
41
Push-to-close
Front Mount (left version shown)
2.9 (.11)
Wire Color Code / Connector Pin Assignment:
PIN 1: Control input signal
PIN 2: Power (+)
PIN 3: Output signal
PIN 4: Ground (-)
PIN 1
Mate connector not
included, order separately.
18.2
(.72)
Latch bolt
8.3 (.32)
34
24
(.945) (1.34)
PIN 3
PIN 2
PIN 4
Connector Detail
10.2
(.40)
Ø 4.25 (.17) Thru
Countersunk Ø 7.4 (.29) x
1.65 (.065) 4 x
92
(3.62)
24
(.945)
24.3
(.96)
12
(.47)
5 (.2)
5 (.2)
25
(.98)
Side Mount (left version shown)
2.9 (.11)
Dimensions same as Front Mount, except as noted.
18.2
(.71)
Latch bolt
8.25 (.33)
Part Number
Part Number
Wire Harness with
Mate Connector
(order separately)
Length
EM-10-40
300 (11.81)
EM-10-41
1000 (39.37)
EM-10-42
2000 (78.74)
12VDC
24VDC
EM-10-23-310
EM-10-23-410
12VDC
24VDC
12VDC
24VDC
Enclosure & latch bolt:
Thermoplastic
Housing assembly screws:
Steel, zinc plated
Electrical Specifications
Recommended operating voltage:
12 or 24 Volt DC
No load operating current:
200 mA @ 12-24 V
Peak stall / current: 1 A
Retracted Position: 12-24 Volt DC
The latch bolt will remain retracted
for as long as the signal is present or
a minimum of 1 second.
Input Signal Current: 25 mA
Extended Position: 0 VDC
Rotation Kit
Wire Harness and Connector
Part Numbers
Material & Finish
Control Input
ACTUAL SIZE
VDC
• Microprocessor
controlled gear motor
• Accepts signals from any
electronic actuation
source
• Frame side mounting
simplifies wiring
Side Mount Version
Part Numbers
12VDC
24VDC
EM-10-13-310
EM-10-13-410
EM-10-21-310
EM-10-21-410
12VDC
24VDC
EM-10-11-310
EM-10-11-410
EM-10-32-310
EM-10-32-410
12VDC
24VDC
EM-10-12-310
EM-10-12-410
t
Output Signal Rating:
450 mA Maximum load
Output will turn on when latch bolt is in
retracted position. Output slow flashes
On/Off when latch error occurs.
No signal at latch bolt extended
position.
Rotation Kit *
EM-10-32-85
(order separately)
VDC
Output Signal
Front Mount Version
The Electronic Keeper is provided
with a specific latch bolt orientation
(Left, Right or Center). Latch bolt
direction can be re-oriented using the
appropriate replacement gear from
the *optional rotation kit.
Other options available. For complete details
on variety, part numbers, installation and
specification, go to
Dimensions in millimeters (inch) unless otherwise stated
www.southco.com/EM-10
12V
24V