Brushless DC Motors with Integrated Controller MA34000 Series MA34132, 32 Series Part/Model Number Specification Voltage Power Rating No-Load Speed Continuous Torque Continuous Output Power Current Rotor Inertia Length Weight Frame Size Units MA34132 AC Watts Hp RPM lb-in Nm Watts (W) Amps (A) lb-in-sec2 kg-m2 Inches mm Lbs Kg Inches mm 120 168 0.23 1750 8.10 0.915 168 2.0 .00088 9.94E-5 6.18 157 6.1 2.8 3.25 82.6 Standard Features • Speed Command Option • External INHIBIT (/ENABLE) input • Fault Protection 0.19 • Direction of rotation option • Speed Monitor output • FAULT (READY) monitor output 0.16 • External faul reset 9 0.24 8 0.21 7 6 5 0.13 4 0.11 Torque (lb-in) Power (HP) 3 2 1 0 0.08 0.05 0.03 0 0.00 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Power (HP) Torque (lb-in) Performance @ 120VAC • TENV and IP50 construction Complementary Products • Gearboxes (consult factory) • Cables • Brakes Speed (KRPM) This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled laboratory conditions. Actual performance will vary depending on the operating environment and application. AMETEK reserves the right to revise its products without notification. The above characteristics represent standard products. For products designed to meet specific applications, contact PITTMAN Motor Sales Department. PITTMAN PRODUCTS 343 Godshall Drive, Harleysville, PA 19438 USA: +1 267 933 2105 - Europe: +33 240928751 - Asia: +86 21 5763 1258 www.pittman-motors.com F5 ____ Brushless DC Motors with Integrated Controller MA34000 Series MA34232, 32 Series Part/Model Number Specification Voltage Power Rating No-Load Speed Continuous Torque Continuous Output Power Current Rotor Inertia Length Weight Frame Size Units MA34232 AC Watts Hp RPM lb-in Nm Watts (W) Amps (A) lb-in-sec2 kg-m2 Inches mm Lbs Kg Inches mm 120 268 0.36 3450 6.50 0.734 265 4.0 .00088 9.94E-5 6.18 157 6.1 2.8 3.25 82.6 Standard Features • Speed Command Option • External INHIBIT (/ENABLE) input • Fault Protection 0.19 • Direction of rotation option • Speed Monitor output • FAULT (READY) monitor output 0.16 • External faul reset 9 0.24 8 0.21 7 6 5 0.13 4 0.11 Torque (lb-in) Power (HP) 3 2 1 0 0.08 0.05 0.03 0 0.00 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 Power (HP) Torque (lb-in) Performance @ 120VAC • TENV and IP50 construction Complementary Products • Gearboxes (consult factory) • Cables • Brakes Speed (KRPM) This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled laboratory conditions. Actual performance will vary depending on the operating environment and application. AMETEK reserves the right to revise its products without notification. The above characteristics represent standard products. For products designed to meet specific applications, contact PITTMAN Motor Sales Department. PITTMAN PRODUCTS 343 Godshall Drive, Harleysville, PA 19438 USA: +1 267 933 2105 - Europe: +33 240928751 - Asia: +86 21 5763 1258 www.pittman-motors.com F6 ____ Brushless DC Motors with Integrated Controller MA34000 Series MA34134, 34 Series Part/Model Number Specification Voltage Power Rating No-Load Speed Continuous Torque Continuous Output Power Current Rotor Inertia Length Weight Frame Size Units MA34134 AC Watts Hp RPM lb-in Nm Watts (W) Amps (A) lb-in-sec2 kg-m2 Inches mm Lbs Kg Inches mm 120 280 0.38 1750 13.40 1.514 278 8.0 .00144 1.63E-4 7.18 182.4 8.4 3.8 3.25 82.6 Standard Features 14 0.40 • Speed Command Option • External INHIBIT (/ENABLE) input • Fault Protection 12 0.34 • Direction of rotation option • Speed Monitor output • FAULT (READY) monitor output 10 0.29 8 0.23 6 0.17 Torque (lb-in) Power (HP) 4 2 0 0.11 0.06 0 0.00 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Power (HP) Torque (lb-in) Performance @ 120VAC • TENV and IP50 construction • External fault reset Complementary Products • Gearboxes (consult factory) • Cables • Brakes Speed (KRPM) This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled laboratory conditions. Actual performance will vary depending on the operating environment and application. AMETEK reserves the right to revise its products without notification. The above characteristics represent standard products. For products designed to meet specific applications, contact PITTMAN Motor Sales Department. PITTMAN PRODUCTS 343 Godshall Drive, Harleysville, PA 19438 USA: +1 267 933 2105 - Europe: +33 240928751 - Asia: +86 21 5763 1258 www.pittman-motors.com F7 ____ Brushless DC Motors with Integrated Controller MA34000 Series MA34236, 36 Series Part/Model Number Specification Voltage Power Rating No-Load Speed Continuous Torque Continuous Output Power Current Rotor Inertia Length Weight Frame Size Units MA34236 AC Watts Hp RPM lb-in Nm Watts (W) Amps (A) lb-in-sec2 kg-m2 Inches mm Lbs Kg Inches mm 120 746 1 3450 18.30 2.068 747 8.0 .00206 2.33E-4 10.37 263.4 10.90 4.9 3.25 82.6 20 18 16 14 12 10 8 6 4 2 0 Standard Features Torque (lb-in) Power (HP) 0 0.5 1.0 1.5 2.0 2.5 3.0 1.10 0.99 0.88 0.77 0.66 0.55 0.44 0.33 0.22 0.11 0.00 3.5 Power (HP) Torque (lb-in) Performance @ 120VAC • Speed Command Option • External INHIBIT (/ENABLE) input • Fault Protection • Direction of rotation option • Speed Monitor output • FAULT (READY) monitor output • TENV and IP50 construction • External fault reset Complementary Products • Gearboxes (consult factory) • Cables • Brakes Speed (KRPM) This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled laboratory conditions. Actual performance will vary depending on the operating environment and application. AMETEK reserves the right to revise its products without notification. The above characteristics represent standard products. For products designed to meet specific applications, contact PITTMAN Motor Sales Department. PITTMAN PRODUCTS 343 Godshall Drive, Harleysville, PA 19438 USA: +1 267 933 2105 - Europe: +33 240928751 - Asia: +86 21 5763 1258 www.pittman-motors.com F8 ____