TM
ZZ
ZZ
TOP SECTION XX-XX
TOP VIEW
YY
Tomorrow’s Solution for Today’s Data Center
OVERALL HEIGHT = DIM’H’ + 1.0
Scope of Supply
Description
XX
XX
Qty.
End Frame, Top
1
End Frame, Bottom
Top Cover, with Gland Plates
1
1
Bottom Cover, with Gland Plates
1
Cable Channel, 200mmD,Front
Cable Channel, 100mmD, Rear
Cable Hanger
Door, Steel, for Front and Rear
1
1
6 sets
2
Tomorrow’s Solutions
for Today’s Data Centers.
YY
RAIL WIDTH
05.+ 1.0
OVERALL DEPTH = DIM’H’ + 1.0
SIDE VIEW
FRONT VIEW
REAR SECTION YY-YY
SIDE SECTION ZZ-ZZ
BOTTOM VIEW
Sizes :
Physical Dimensions
Height : 42U and 47U
Width : 200mm
Depth : 1000 and 1200mm
Depth
Overall
‘D’
1000
1200
Height
Overall
‘U’
‘H’
42U
1966
47U
2188
Ordering Information :
IMPress Cabling Frame
All dimensions are in mm.
Depth (mm)
Height
Width (mm)
1000
1200
42U
200
IK-2442-XY
IK-2642-XY
47U
200
IK-2447-XY
IK-2647-XY
Accessories for IMPress Cabling Frame
CABLE BASKETS - One set is required per Cabling Frame
Depth
Code
Cabinet
Y=2
Anthracite Grey
Y=3
Black (RAL 9005)
1000 mm
1200 mm
42U
IS-A150
IS-A152
47U
IS-A151
IS-A153
Height
BLANKING PANELS, 19”
1U
2U
3U
10-9301
10-9302
10-9303
CABLE LOOPS, SINGLE 1U PVC
CABLE LOOPS, SINGLE 2U PVC
BRUSHES FOR CABLE PORTS, 4 PCS
BRUSH PANEL, 3U/19”, SET OF 2
83-1721
83-1722
IS-A130*
IS-A132**
* Two sets of Brushes are required for Top and Bottom Covers
** Each Cabling Frame needs 4 sets of Brush Panel
APW President Systems Limited.
The first name in enclosure systems
R-2, Technopolis Knowledge Park,
Mahakali Caves Road, Andheri (East),Mumbai 400 093
Tel : +91 22 6644 8888 • Fax: +91 22 6644 8899
• Email: info@apwpresident.com
• Website: www.apwpresident.com
The IMPress Cabling Frame is a new concept being introduced with the IMPress family of cabinets that provides much better access and
ease of installation for equipment integrators. Introduction of cable bunches into the cabinets is greatly simplified, thereby reducing
installation times significantly.
Data Centres typically contain a combination of 600 and 800mm width cabinets. The 600mm wide cabinets are used for housing Servers,
whereas the 800mm wide cabinets are configured for housing 19” rack-mount Networking equipment at the centre and the 100mm of
additional space at either side is used for routing data cables. This practice requires the ordering and stocking of two styles of cabinets, and
can lead to a wasteful use of expensive data centre space.
The IMPress Cabling Frame makes it possible to combine both functions within a single cabinet of 600mm width that houses the Servers as
well as the Network equipment. The Cabling Frame itself occupies just 200mm of floor space between adjoining cabinets and provides all the
facilities needed for the orderly management, routing and distribution of cable bunches to either of the two adjacent cabinets. Any number of
the IMPress Cabling Frames maybe bayed alternately between IMPress cabinets.
The first name in enclosure systems
16/7/10
www.apwpresident.com
TM
Features
High level of accessibility to the whole cabling area _ simplifies
installation activity
1
1
The IMPress Cabling Frame has cable entry
provisions which allow completion of cable
drawing activity at Data Centers before the
racks are positioned. Pre-drawn cable
bunches – including Patch Panels – can be
gathered into the Cabling Frame
through the open Entry Ports at
front or rear, either from overhead
or underfloor. The Entry Ports can
be covered with Gland Plates or
lined with optional Cable Brushes.
All round Cable Entry options. Brush-lined entry ports at top & bottom
to suit overhead or underfloor cabling
Complete flexibility for inter-rack cabling and for routing of cables from
front-to-back or back-to-front
CABLE ENTRY PORTS
3
Full height Cabling Baskets at the center simplify structured cabling
Vertical Cable Channels at front & rear support dense cabling
Wire Hangers at 1U pitch along the front and rear support cable
distribution to adjoining cabinets
4
Provision to mount Patch Panels, Brush Panels, or Blank Panels
Can be installed after “cable pulling” has been done
2
2
2
IMPress Cabling Frames can be fitted with
optional full height Cable Baskets for
supporting structured cabling. The Cable
Basket consists of a pair of wire frames made
of 4mm steel wires welded together in a
rectangular pattern so as to form an open
grid, or mesh. The entire frame is PVC coated
to ensure a smooth finish
that is free of sharp edges
so as to prevent damage
to optical fiber cables.
4
3
CABLE
SUPPORTS
7
CABLE BASKETS - for Structured Cabling
6
Cable Basket
5
3
CABLE CHANNELS
IMPress Cable Channels are designed to
support dense cabling. These full height
channels are positioned at the front
and /or rear of the Cabling Frames
and aligned with the Cable Entry
ports at the top and bottom.
1
Cable Feed-through Port
with Brushes
5 CABLE FEED THROUGH - 3U
The first name in enclosure systems
Cable Channels for IMPress Cabling
Frames are provided with a pair of “Feed
Through” ports. These ports are 3U wide
and suitable for mounting 19” equipment
vertically. They can be used for fixing
upto 3 Patch Panels of 1U each, or a
pair of Brush Panels 6 for passage of
cable bunches, or covered with
19” Blank Panels. 7
"©2010 APW President Systems Limited. All Rights Reserved.”“Patent Pending” “Design Registration Pending”
16/7/10
The Cable Channels have provisions
for fixing a variety of Cable Loops,
Cable Ties, and other Cable
Management accessories, as well as
Wire Hangers for the distribution of
cables horizontally into the adjoining
cabinets.
4 CABLE HANGERS
Cable Hangers are mounted on either
sides of the vertical Cable Channels at
”
the front and rear of IMPress Cabling
Frames. These Hangers – spaced 1U
apart – provide support to bunches of
UTP cables that are routed horizontally to
the front of equipment in the cabinets
adjoining the Cabling Frame. The Cable
Hangers are formed from 4mm steel wires
and are PVC coated to ensure a smooth
surface that is free of sharp edges so as
to prevent damage to cables.
TM
ZZ
ZZ
TOP SECTION XX-XX
TOP VIEW
YY
Tomorrow’s Solution for Today’s Data Center
OVERALL HEIGHT = DIM’H’ + 1.0
Scope of Supply
Description
XX
XX
Qty.
End Frame, Top
1
End Frame, Bottom
Top Cover, with Gland Plates
1
1
Bottom Cover, with Gland Plates
1
Cable Channel, 200mmD,Front
Cable Channel, 100mmD, Rear
Cable Hanger
Door, Steel, for Front and Rear
1
1
6 sets
2
Tomorrow’s Solutions
for Today’s Data Centers.
YY
RAIL WIDTH
05.+ 1.0
OVERALL DEPTH = DIM’H’ + 1.0
SIDE VIEW
FRONT VIEW
REAR SECTION YY-YY
SIDE SECTION ZZ-ZZ
BOTTOM VIEW
Sizes :
Physical Dimensions
Height : 42U and 47U
Width : 200mm
Depth : 1000 and 1200mm
Depth
Overall
‘D’
1000
1200
Height
Overall
‘U’
‘H’
42U
1966
47U
2188
Ordering Information :
IMPress Cabling Frame
All dimensions are in mm.
Depth (mm)
Height
Width (mm)
1000
1200
42U
200
IK-2442-XY
IK-2642-XY
47U
200
IK-2447-XY
IK-2647-XY
Accessories for IMPress Cabling Frame
CABLE BASKETS - One set is required per Cabling Frame
Depth
Code
Cabinet
Y=2
Anthracite Grey
Y=3
Black (RAL 9005)
1000 mm
1200 mm
42U
IS-A150
IS-A152
47U
IS-A151
IS-A153
Height
BLANKING PANELS, 19”
1U
2U
3U
10-9301
10-9302
10-9303
CABLE LOOPS, SINGLE 1U PVC
CABLE LOOPS, SINGLE 2U PVC
BRUSHES FOR CABLE PORTS, 4 PCS
BRUSH PANEL, 3U/19”, SET OF 2
83-1721
83-1722
IS-A130*
IS-A132**
* Two sets of Brushes are required for Top and Bottom Covers
** Each Cabling Frame needs 4 sets of Brush Panel
APW President Systems Limited.
The first name in enclosure systems
R-2, Technopolis Knowledge Park,
Mahakali Caves Road, Andheri (East),Mumbai 400 093
Tel : +91 22 6644 8888 • Fax: +91 22 6644 8899
• Email: info@apwpresident.com
• Website: www.apwpresident.com
The IMPress Cabling Frame is a new concept being introduced with the IMPress family of cabinets that provides much better access and
ease of installation for equipment integrators. Introduction of cable bunches into the cabinets is greatly simplified, thereby reducing
installation times significantly.
Data Centres typically contain a combination of 600 and 800mm width cabinets. The 600mm wide cabinets are used for housing Servers,
whereas the 800mm wide cabinets are configured for housing 19” rack-mount Networking equipment at the centre and the 100mm of
additional space at either side is used for routing data cables. This practice requires the ordering and stocking of two styles of cabinets, and
can lead to a wasteful use of expensive data centre space.
The IMPress Cabling Frame makes it possible to combine both functions within a single cabinet of 600mm width that houses the Servers as
well as the Network equipment. The Cabling Frame itself occupies just 200mm of floor space between adjoining cabinets and provides all the
facilities needed for the orderly management, routing and distribution of cable bunches to either of the two adjacent cabinets. Any number of
the IMPress Cabling Frames maybe bayed alternately between IMPress cabinets.
The first name in enclosure systems
16/7/10
www.apwpresident.com