MBR 1100 - EECS at UC Berkeley

advertisement
Bulletin PD-20587 rev. C 12/04
MBR1100
SCHOTTKY RECTIFIER
1.0 Amp
Description/ Features
Major Ratings and Characteristics
Characteristics
Values
Units
IF(AV) Rectangular
waveform
1.0
A
VRRM
100
V
IFSM @ tp = 5 µs sine
200
A
VF
@ 1 Apk, TJ = 125°C
0.68
V
TJ
range
- 40 to 150
°C
The MBR1100 axial leaded Schottky rectifier has been optimized
for very low forward voltage drop, with moderate leakage. Typical
applications are in switching power supplies, converters, freewheeling diodes, and reverse battery protection.
Low profile, axial leaded outline
High purity, high temperature epoxy encapsulation for
enhanced mechanical strength and moisture resistance
Very low forward voltage drop
High frequency operation
Guard ring for enhanced ruggedness and long term
reliability
Lead-Free plating
CASE STYLE AND DIMENSIONS
Conform to JEDEC Outline DO-204AL (DO-41)
Dimensions in millimeters and inches
www.irf.com
1
MBR1100
Bulletin PD-20587 rev. C 12/04
Voltage Ratings
Part number
VR
MBR1100
Max. DC Reverse Voltage (V)
100
VRWM Max. Working Peak Reverse Voltage (V)
Absolute Maximum Ratings
Parameters
IF(AV) Max. Average Forward Current
Value
Units
10
A
Conditions
50% duty cycle @ TC = 85°C, rectangular wave form
* See Fig. 4
IFSM
Max. Peak One Cycle Non-Repetitive
200
5µs Sine or 3µs Rect. pulse
Following any rated
load condition and with
10ms Sine or 6ms Rect. pulse rated VRRM applied
A
Surge Current * See Fig. 6
50
EAS
Non-Repetitive Avalanche Energy
1.0
mJ
IAR
Repetitive Avalanche Current
0.5
A
TJ = 25 °C, IAS = 0.5 Amps, L = 8 mH
Current decaying linearly to zero in 1 µsec
Frequency limited by TJ max. VA = 1.5 x VR typical
Electrical Specifications
Parameters
VFM
* See Fig. 1
IRM
Value
Units
0.85
V
@ 1A
0.96
0.68
V
V
@ 2A
@ 1A
0.78
V
@ 2A
Max. Forward Voltage Drop
(1)
Conditions
TJ = 25 °C
TJ = 125 °C
Max. Reverse Leakage Current
0.5
mA
T J = 25 °C
* See Fig. 2
1.0
mA
T J = 125 °C
(1)
VR = rated VR
CT
Typical Junction Capacitance
35
pF
V R = 5VDC, (test signal range 100Khz to 1Mhz) 25°C
LS
Typical Series Inductance
8.0
nH
Measured lead to lead 5mm from package body
dv/dt Max. Voltage Rate of Change
10000
V/ µs (Rated VR)
(1) Pulse Width < 300µs, Duty Cycle <2%
Thermal-Mechanical Specifications
Parameters
Value
Units
TJ
Max. Junction Temperature Range(*)
-40 to 150
°C
Tstg
Max. Storage Temperature Range
-40 to 150
°C
RthJL Max. Thermal Resistance Junction
to Lead
(**)
wt
80
Conditions
°C/W DC operation (* See Fig. 4)
Approximate Weight
0.33(0.012) g (oz.)
Case Style
DO-204AL(DO-41)
(*) dPtot
1
<
thermal runaway condition for a diode on its own heatsink
dTj
Rth( j-a)
(**) Mounted 1 inch square PCB, Thermal Probe connected to lead 2mm from Package
2
www.irf.com
MBR1100
Bulletin PD-20587 rev. C 12/04
10
Reverse Current - I R (mA)
T J = 150˚C
1
0.1
125˚C
0.01
0.001
25˚C
0.0001
0
0
40
60
80
100
Reverse Voltage - VR (V)
TJ = 150˚C
Fig. 2 - Typical Values Of Reverse Current
Vs. Reverse Voltage
TJ = 125˚C
1
20
TJ = 25˚C
100
0.1
0
0.4
0.8
1.2
1.6
Forward Voltage Drop - VFM (V)
Fig. 1 - Max. Forward Voltage Drop Characteristics
Junction Capacitance - CT (pF)
Instantaneous Forward Current - IF (A)
10
T = 25˚C
J
10
0
20
40
60
80
100
Reverse Voltage - VR (V)
Fig. 3 - Typical Junction Capacitance
Vs. Reverse Voltage
www.irf.com
3
MBR1100
1
160
Average Power Loss (Watts)
Allowable Case Temperature (°C)
Bulletin PD-20587 rev. C 12/04
140
120
DC
100
80
60 Square wave (D = 0.50)
80% Rated Vr applied
40
20 see note (2)
0
0.8
0.6
D = 0.20
D = 0.25
D = 0.33
D = 0.50
D = 0.75
DC
DC
RMS Limit
0.4
0.2
0
0
0.2 0.4 0.6 0.8
1
1.2 1.4 1.6
Average Forward Current - I
F(AV)
0
(A)
1
Average Forward Current - I
Fig. 4 - Max. Allowable Case Temperature
Vs. Average Forward Current
1.5
F(AV)
(A)
Fig. 5- Forward Power Loss
Characteristics
1000
Non-Repetitive Surge Current - I
(A)
FSM
0.5
100
At Any Rated Load Condition
And With rated Vrrm Applied
Following Surge
10
10
100
1000
10000
Square Wave Pulse Duration - t
p
(microsec)
Fig. 6 - Max. Non-Repetitive Surge Current
(2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ;
Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6);
PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR
4
www.irf.com
MBR1100
Bulletin PD-20587 rev. C 12/04
Ordering Information Table
Device Code
MBR
1
100
TR
1
2
3
4
1
-
Schottky MBR Series
2
-
Current Rating: 1
3
-
Voltage Rating: 100= 100V
4
-
TR = Tape & Reel package (5000 pcs)
-
= 1A
= Box package (1000 pcs)
Data and specifications subject to change without notice.
This product has been designed and qualified for Industrial Level and Lead-Free.
Qualification Standards can be found on IR's Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7309
Visit us at www.irf.com for sales contact information. 12/04
www.irf.com
5
Download