1000 Volts FORWARD CURRENT

advertisement
FS2MA
REVERSE VOLTAGE
–
FORWARD CURRENT –
SURFACE MOUNT
GLASS PASSIVATED RECTIFIERS
FEATURES
1000 Volts
2 Amperes
SMA Flat
• Very low profile package – 1.0 mm
• For surface mounted applications
SMA Flat
• Low reverse leakage current
DIM.
MIN.
MAX.
• High current capability
A
0.90
1.10
• IEC 61000-4-2, Level 1 (ESD),> 2KV air
B
1.25
1.65
• Low forward voltage drop
C
0.15
0.40
MECHANICAL DATA
D
2.25
2.95
• Case: JEDEC DO-221AC
E
4.80
5.60
• Case Material: “Green” molding compound, UL flammability
E1
3.95
4.60
L
0.75
1.50
classification 94V-0, (No Br. Sb. Cl.)
All dimension in mm
• Terminals: Lead Free Plating (Matte Tin Finish.)
• Component in accordance to RoHs 2002/95/EC
Maximum Ratings & Thermal Characteristics @ TA = 25°C
Characteristics
unless otherwise specified
Symbol
FS2MA
Unit
Note
FS2MA
---
Maximum Repetitive Peak Reverse Voltage
VR
1000
V
Average Rectified Forward Current
IO
2
A
Peak Forward Surge 8.3ms single half sine-wave superimposed on
rated load @Tj=25°C
IFSM
60
A
Peak Reverse Surge Current
@ Wave Width= 30ms
IRSM
20
mA
TJ
-55 to +150
°C
TSTG
-55 to +150
°C
Device marking code
Operating Junction Temperature Range
Storage Temperature Range
Electrical Characteristics @ TA = 25°C
unless otherwise specified
Characteristics
Maximum Forward Voltage
Maximum DC Reverse Current at
Rated DC Blocking Voltage
@Tj=25°C
@Tj=125°C
Typical Junction Capacitance
Thermal Characteristics @ TA = 25°C
Characteristics
Typical Thermal Resistance (Note 2, 3)
Test
Condition
Symbol
Max
Unit
IF = 2 A
VF
1.2
V
VR = 1000V
IR
5
500
uA
(Note 1)
CJ
15
pF
Value
Unit
unless otherwise specified
Symbol
RΘJC
15
RΘJL
RΘJA
15
70
Note :
Measured at 1.0MHz and applied reverse voltage of 4.0V DC
(2) Thermal Resistance test performed in accordance with JESD-51. Unit mounted on glass-epoxy
substrate with 5 x7 mm copper pad.
(3) Thermal resistance Junction to Case, Lead and Amibent.
(1)
°C/W
REV.2, Apr-2014, KSDP04
RATING AND CHARACTERISTIC CURVES
FS2MA
FIG.2- MAXIMUM NON-REPETITIVE SURGE CURRENT
FIG.1- FORWARD CURRENT DERATING CURVE
70
PEAK FORWARD SURGE CURRENT, (A)
AVERAGE FORWARD CURRENT, (A)
2
1.6
1.2
0.8
0.4
RESISTIVE OR INDUCTIVE LOAD
60
50
40
30
20
8.3ms Single Half Sine Wave
10
0
0
0
25
50
75
100
125
1
150
10
FIG.3- TYPICAL FORWORD CHARACTERISTICS
FIG.4- TYPICAL JUNCTION CAPACITANCE
10
100
CAPACITANCE, (pF)
Tj=125°C
Tj=25°C
1
10
Tj=25°C, f=1MHz, Level=1V
0.1
0.0
1
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1
10
INSTANTANEOUS FORWARD VOLTAGE, (V)
REVERSE VOLTAGE, (V)
FIG.5- TYPICAL REVERSE CHARACTERISTICS
100
INSTANTANEOUS REVERSE CURRENT, (uA)
INSTANTANEOUS FORWARD
CURRENT, (A)
100
NUMBER OF CYCLES AT 60Hz
CASE TEMPERATURE, (℃)
Tj=125°
10
Tj=100°
1
0.1
Tj=25°C
0.01
0
20
40
60
80
100
PERCENT OF RATED PEAK REVERSE VOLTAGE, (%)
120
100
Legal Disclaimer Notice
Important Notice and Disclaimer
LSC reserves the right to make changes to this document and its products and specifications
at any time without notice. Customers should obtain and confirm the latest product
information and specifications before final design, purchase or use.
LSC makes no warranty, representation or guarantee regarding the suitability of its products
for any particular purpose, nor does LSC assume any liability for application assistance or
customer product design. LSC does not warrant or accept any liability with products which are
purchased or used for any unintended or unauthorized application.
No license is granted by implication or otherwise under any intellectual property rights of LSC.
LSC products are not authorized for use as critical components in life support devices or
systems without express written approval of LSC.
Download