DAN222T SURFACE MOUNT FAST SWITCHING DIODE REVERSE VOLTAGE – 80 Volts FORWARD CURRENT – 0.1 Ampere SC-89 FEATURES • Guarding for over voltage protection. • Fast trr • Low CD • For use in ultra high speed switching applications., and low power surface mount applications. MECHANICAL DATA • Case: SC-89 molded plastic • Polarity: As marked on the body MAXIMUM RATINGS @ TA = 25°C unless otherwise specified PARAMETER SYMBOL VALUE UNIT Device marking code Note N9 -- Maximum repetitive peak reverse voltage VRM 80 Vdc Maximum reverse voltage VR 80 Vdc Maximum average forward rectified current IF 100 mA Peak forward surge current @ t = 1 µS IFSM 2.0 Adc Power dissipation PD 150 mW Operating junction temperature range TJ 150 °C TSTG -55 to +150 °C SYMBOL VALUE UNIT Storage temperature range STATIC ELECTRICAL CHARACTERISTICS@ TA = 25°C unless otherwise specified PARAMETER TEST CONDITION Forward voltage IF = 100 mA VF 1.2 Vdc Leakage current VR = 70 V IR 0.1 uAdc Reverse breakdown voltage IR = 100 uA VR 80 Vdc Diode capacitance VR = 6.0V, f = 1.0 MHZ CD 3.5 pF SYMBOL TYP. UNIT trr (Note 1) 4.0 ns DYNAMIC ELECTRICAL CHARACTERISTICS @ TA = 25°C unless otherwise specified PARAMETER Reverse recovery time Note: (1) trr test circuit on following page. TEST CONDITION IF=5.0mA,VR=6.0V, RL=100Ω, Irr = 0.1IR REV.-0, FEB.-2015, KSYR101 RATING AND CHARACTERISTIC CURVES DAN222T FIG. 1 – FORWARD VOLTAGE FIG. 2 – REVERSE CURRENT FIG. 3 – DIODE CAPACITANCE RECOVER TIME EOUVIALENT TEST CIRCUIT INPUT PULSE OUTPUT PULSE MECHANICAL INFORMATION DAN222T Package Dimensions : SC-89 Dim. INCHES MILLIMETERS Min. Typ. Max. Min. Typ. Max. A 0.059 0.063 0.067 1.50 1.60 1.70 B 0.030 0.034 0.040 0.75 0.85 0.95 C 0.024 0.028 0.031 0.60 0.70 0.80 D 0.009 0.011 0.013 0.23 0.28 0.33 J 0.004 0.006 0.008 0.10 0.15 0.20 K 0.012 0.016 0.020 0.30 0.40 0.50 M 10° 10° N 10° 10° S 0.059 0.063 0.067 1.50 1.60 1.70 Soldering Pad Layout : Dimensions in inches and ( millimeters) PACKAGE SC-89 G 0.020(0.50) BSC. H 0.021(0.53) REF. L 0.043(1.10) REF. LEGAL DISCLAIMER NOTICE Important Notice and Disclaimer LSC reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. LSC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does LSC assume any liability for application assistance or customer product design. LSC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of LSC. LSC products are not authorized for use as critical components in life support devices or systems without express written approval of LSC.