Material Sourcing List
Region 4: Japan, Australia, New Zealand
4
Aramco Asia Japan K.K.
Marunouchi Building 26F
2-4-1 Marunouchi, Chiyoda-ku
Tokyo, 100-6326, JAPAN
Phone: +81 (3) 6367-7801
Fax: +81 (3) 3211-3544
Email: AAJ-Registration@aramcoasia.com
Item
1
2015
Category
Chemicals
(Drilling Fluids)
Material Description
Material Long Description
Material Number
9COM/9CAT
POLYVINYL/POLYACRYLIC
COMPOUNDS TO 400F
ADMIXTURE: DRILLING MUD; 25 KG PAPER SACKS; SHIPMENT OF PRODUCT SHALL
CONFORM TO SAUDI ARAMCO EXPORT ADMIXTURE DRILLING MUD; POWDER
FORM,POLYACRYLIC,FOR FILTRATE REDUCER FLUID LOSS ADDITIVE,CO-POLYMER
OF POLYVINYL COMPOUNDS,25 KG OR 50 LB BAG,API 13A,HIGH TEMPERATURE
ENVIRONMENT 150 DEG C (300 DEG F) TO 205 DEG C (400 DEG F), SHIPMENT OF
PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL
NOTE: THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER)
SHALL BE AS FOLLOWS: 1ST PLY 50 LB MIN. NATURAL KRAFT PAPER (INTERIOR
PLY) 2ND PLY 50 LB MIN. NATURAL KRAFT PAPER 3RD PLY SEPARATE INNER BAG
LINER, HIGH DENSITY ORIENTED AND CROSS-LAMINATED INNER LINER (TUBULAR
SHAPE) MADE OF POLYETHYLENE RESIN MATERIAL WITH A MINIMUM WALL
THICKNES OF 0.1 MM. 4TH PLY 50 LB MIN. NATURAL KRAFT PAPER. 5TH PLY 60 LB
MIN. NATURAL KRAFT PAPER WET STRENGTH (EXTERIOR PLY) THE BAG MUST BE
VALVE/SPOUT TYPE, COMPLETELY SEALED, MOISTURE AND WATER PROOF.
1000021602
Saudi Aramco: Company General Use
1
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
2
2015
Category
Chemicals
(Drilling Fluids)
Material Description
LIQUID GILSONITE
Material Long Description
GILSONITE: LIQUID GILSONITE; BORE HOLE STABILIZING AND FLUID LOSS
CONTROL AGENT ADMIXTURE DRILLING MUD; BLEND OF DISPERSED COUPLED
GILSONITE AND LIGNITE FORM,SUSPENDED SURFACTANT LIQUID,FOR BOREHOLE
STABILIZING, AND FLUID LOSS CONTROL AGENT PRIMARY FUNCTION IS TO
PREVENT STUCK PIPE, REDUCE FLUID LOSS AND CREATE STRONG BOREHOLE
CONDITIONS WITH EXCEPTIONAL HTHP AND DYNAMIC FLUID LOSS CONTROL,
NON- TOXIC, ENVIRONMENTALLY SAFE ALSO FUNCTIONS AS A SHALE STABILIZER
AND HAS A BROAD PSD FOR SEALING MICRO- FRACTURES. NON SHEENING,55
GAL/DRUM,APPEARANCE, BLACK SUSPENSION.FREEZING POINT, -4 F(-20 C)TO -13
F(-25C). FLASH POINT,F, >200. SOLUBILITY IN WATER, MISCIBLE. LUBRICITY TEST,
TORQ REDUCTION :5% AND 12% AT 4 PPB RESPECTIVELY IN STANDARD SAUDI
ARAMCO WATER BASE MUD SYSTEM, USING OFI MODEL EP/LUBRICITY TESTER.
FILTRATION CONTROL, API FILTRATE LOSS:6.0 ML/30MIN AT 4PPB HTHP FILTRATE
LOSS AT 250 F AND 500 PSI:16 ML/30MIN AT 8PPB SHALE ACCRETION TEST, <5%
IN STANDARD SAUDI ARAMC KCL POLYMER MUD. AT 8 PPB IN STANDARD KCL
POLYMER MUD:1. IMPROVE HTHP FLUID LOSS: 20% MINIMUM AT 250 F AND 500
PSI 2. IMPROVE LUBRICITY: 15% MINIMUM, BY USING OFI MODEL EXTREME
PRESSURE (PE)/LUBRICITY TESTER 3. SHALE ACCRETION TEST, <5%.
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000021608
2
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
3
Chemicals
(Drilling Fluids )
4
Chemicals
(Drilling Fluids)
5
Chemicals
(Drilling Fluids)
2015
Material Description
Material Long Description
ADMIXTURE: DRILLING MUD; 25 KG (50 LB) SACK; SHIPMENT OF PRODUCT SHALL
CONFORM TO SAUDI ARAMCO EXPORT ADMIXTURE DRILLING MUD; DRY
POWDER FORM,MODIFIED RESINATED LIGNITE DARK BROWN POWDER,FOR
WATER SOLUBLE FILTRATE REDUCER FOR FLUID LOSS CONTROL AND RHEOLOGY
STABILIZER IN HIGH TEMP WATER BASED MUD WELLS,25 KG OR 55 LB BAG,SG:
1.32-1.35, COMPATIBLE USE WITH LIGNOSULFONATE AND LIGNITES,
MAGNESIUM AND CHLORIDE, NORMAL TREATMENT:2-6 LB/BBL FOR FLUID LOSS
CONTROL AT TEMPERATURE APPROACHING 400 DEG F (204 DEG C),THE
RESINATED LIGNITE STABLE TO SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING
204 deg C
MANUAL NOTE: THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG
(CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 50 LB MIN. NATURAL KRAFT PAPER
(INTERIOR PLY) 2ND PLY 50 LB MIN. NATURAL KRAFT PAPER 3RD PLY SEPARATE
INNER BAG LINER, HIGH DENSITY ORIENTED AND CROSS-LAMINATED INNER
LINER (TUBULAR SHAPE) MADE OF POLYETHYLENE RESIN MATERIAL WITH A
MINIMUM WALL THICKNES OF 0.1 MM. 4TH PLY 50 LB MIN. NATURAL KRAFT
PAPER. 5TH PLY 60 LB MIN. NATURAL KRAFT PAPER WET STRENGTH (EXTERIOR
PLY) THE BAG MUST BE VALVE/SPOUT TYPE, COMPLETELY SEALED, MOISTURE
AND WATER PROOF.
ADMIXTURE: DRILLING MUD; 50 LB BAG; ADMIXTURE DRILLING MUD; FINE
POWDER FORM,ZINC OXIDE (ZNO), 90% (MINIMUM) PURE, SP. GR.,5.5,FOR
ZINC OXIDE
HYDROGEN SULFIDE SCAVENGER FOR DRILL PIPE CORROSION PROTECTION IN
FRESH WATER OR BRINE FOR DRILLING & COMPLETION OPERATIONS,25 KG OR 55
LB BAGS,API 13A.
AGENT: WELL STIMULANT; SURFACE TENSION REDUCER; SOLUBLE IN
HYDROCARBONS; DISPERSIBLE IN FRESH AGENT WELL STIMULANT; FOR SURFACE
TENSION REDUCER FOR HYDROFLUORIC ACID SOLUTION ADDITIVES,ETHYLENE
MUTUAL SOLVENT
GLYCOL MONOBUTYL ETHER MUTUAL SOLVENT,LIQUID FORM,55 GAL
DRUM,SOLUBLE IN HYDROCARBONS, DISPERSIBLE IN FRESH WATER, ACID &
BRINE, 150 DEG F FLASH POINT (TOC).
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000021675
1000021671
1000021973
3
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
6
7
Category
Material Description
Material Number
9COM/9CAT
Chemicals
(Drilling Fluids )
INHIBITOR: CORROSION; 55-GAL DRUM. INHIBITOR; 55 GAL DRUM,A BLEND OF
AMINES AND IMADAZOLINES FUNCTION GROUPS, OIL SOLUBLE /WATER
DISPERSIBLE CORROSION INHIBITOR, AMINE BASEDAMINE BASED,
AMINE CORROSION INHIBITOR RECOMMENDED FOR USE IN HIGH TEMPERATURE, HIGH PRESSURE
ENVIRONMENTS UP TO 350-400 DEG F PROVIDES EXCELLENT CORROSION
PROTECTION IN SOUR H2S, OR SWEET CO2 OIL AND GAS WELLS. DISPERSIBLE IN
FRESH, BRACKISH OR BRINE WATER. PACKER FLUID AND CORROSION INHIBITOR.
1000022135
Chemicals
(Drilling Fluids )
KEROSENE, LOW TOXICITY, ODORLESS ADDITIVE DRILLING FLUID; CLEAR LIQUID,
FREE FROM SUSPENDED MATTER FORM,KEROSENE, LOW TOXICITY, ODORLESS
BASE OIL ADDITIVE,FOR AA OIL-BASED DRILLING FLUIDS,LOW AROMATIC
OIL,BULK DELIVERY,LOW TOXICITY OIL COMPATIBLE WITH ALL OIL-BASED
DRILLING FLUIDS ADDITIVES (EMULSIFIERS, ORGANOPHILIC CLAYS, AND FILTRATE
CONTROL AGENTS) SPECIFIC GRAVITY @ 15 DEG C .77- 79 (ASTM D 1298), FLASH
POINT: MORE THAN 185 DEG F (85 DEG C) (ASTM D 93), ANILINE POINT: MORE
THAN 167 DEG F (75 DEG C) (ASTM D 611), TOTAL AROMATICS: LESS THAN . 5%
VOL (ASTM D 1319), OLEFINS CONTENT: NIL PPM, BENZENE CONTENT: NIL PPM,
POLYNUCLEAR AROMATIC: NIL PPM, LC50: MORE THAN 100000 PPM. (MYSID
SHRIMP NINETY-SIX HOUR BIOASSAY TEST).
1000022138
LOW TOXICITY BASED OIL
8
Chemicals
(Drilling Fluids)
THINNER OBM
9
Chemicals
(Drilling Fluids)
OIL WETTING AGENT
2015
Material Long Description
ADDITIVE DRILLING FLUID; LIQUID FORM,POLYOLEFIN/ORGANIC SULFONATE
BLEND, FATTY ACID DERIVATIVES OR OTHER CHEMICAL THAT DO SAME
FUNCTION.,FOR TO LOWER REHEOLOGICAL PROPERTIES FOR SYNTHETIC OR OIL
BASE FLUIDS.,55 GALLON DRUM,APPEARANCE: AMBER LIQUID, COLOUR: DARK
AMBER, ODOUR/TASTE: SLIGHT, S.G: 0.9-0.96, INSOLUBLE, FLASH POINT: MORE
THAN 190 F DEG.
ADMIXTURE, DRILLING MUD: INVERTED EMULSION MUD COMPONENTS,
DRILTREAT (STABILIZER), AMBER-COLOR VISCOUS ADMIXTURE DRILLING MUD;
VISCOUS LIQUID, AMBER COLOR FORM,ORGANIC SURFACTANT OIL-WETTING
AGENT,FOR OIL BASE MUDS,5 GAL /PAIL,AN ORGANIC SURFACTANT OIL-WETTING
AGENT FOR OIL BASE MUDS. ITS PRIMARY FUNCTION IS TO ACT AS AN OIL-WET
WEIGHTING MATERIAL AND DRILL SOLIDS TO PREVENT WATER WET SOLIDS, TO
IMPROVE FILTERATION CONTROL, RHEOLOGICAL STABILITY AND EMULSION
STABILITY. NORMAL TREATMENTS RANGE 0.25 û 2.0 LBS/BBL DIRECTLY TO THE
SYSTEM AND IT IS TEMPERATURE STABLE GREATER THAN 350 DEG F (176 DEG C).
PHYSICAL APPEARANCE: AMBER COLOR, VISCOUS LIQUID. SG: 0.93 û 1.0. FLASH
POINT: > 200 DEG F (93 DEG C) BY PMCC.
Saudi Aramco: Company General Use
1000823699
1000022171
4
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
10
11
Category
Chemicals
(Drilling Fluids)
Chemicals
(Drilling Fluids)
Material Description
Material Long Description
Material Number
9COM/9CAT
ORGANOPHILIC LIGNITE
ADMIXTURE, DRILLING MUD: INVERTED EMULSION MUD COMPONENTS OILDISPERSIBLE ORGANOPHILIC LEONARDITE 25 KG (50 LB) ADMIXTURE DRILLING
MUD; 25 KG (55 LB) BAG,INVERTED EMULSION MUD COMPONENTS, OILDISPERSIBLE ORGANOPHILIC LEONARDITE, 25 KG (55 LB) BAG: MOISTURE GRATER
THAN 8% WT. PARTICLE SIZE 100% WT PASSING THROUGH 70 US MESH
IMPURITIES (SAND, LIME, GYPSUM-..ETC) 2% WT, MAX.
1000022172
SECONDARY EMULSIFIER
ADMIXTURE, DRILLING MUD: INVERTED EMULSION MUD COMPONENTS,
POLYAMINATED FATTY ACID & PARTIAL AMIDE OF ADMIXTURE DRILLING MUD;
BLEND OF POLYAMINATED FATTY ACID & PARTIAL AMIDE OF POLYAMINE WITH
METHANOL,FOR SECONDARY EMULSIFIER AND WETTING AGENT FOR INVERTED
EMULSION DRILLING FLUIDS,55 GAL PER DRUM,SECONDARY EMULSIFIER AND
WETTING AGENT FOR INVERTED EMULSION DRILLING FLUIDS. A BLEND OF
POLYAMINATED FATTY ACID AND PARTIAL AMIDE OF POLYAMINE WITH
METHANOL, AUTHORIZED SAUDI ARAMCOÆS PERSONNEL WILL CARRY OUT
SAMPLING AND TESTING AS NEEDED. SPECIFIC GRAVITY @ 77 DEG F (25 DEG C)
0.95 - 0.96 FLASH POINT: HIGHER THAN 149 DEG F (65 DEG C) ACTIVE
INGREDIENTS: A. FATTY ACID & AMINE DERIVATIVES 65 - 70% B. ASPHALTIC-TYPE
MATERIAL NONE C. ACID NUMBER, 45 - 50 MG KOH/G.
1000022173
12
Chemicals
(Drilling Fluids)
PRIMARY EMULSIFIER
13
Chemicals
(Drilling Fluids)
LIQUID SPOTTING FLUID
2015
ADMIXTURE, DRILLING MUD: INVERTED EMULSION MUD COMPONENTS,
OXIDIZED TALL OIL & POLYAMINATED FATTY ACID, CLEAR, ADMIXTURE DRILLING
MUD; CLEAR FORM,A BLEND OF OXIDIZED TALL OIL AND POLYAMINATED FATTY
ACID,FOR PRIMARY EMULSIFIER FOR INVERTED EMULSION DRILLING FLUIDS,55
GAL PER DRUM,SPECIFIC GRAVITY @ 77 DEG F (25 DEG C) 0.94 - 0.95 FLASH
POINT: HIGHER THAN 149 DEG F (65 DEG C) ACTIVE INGREDIENTS: A: OXIDIZED
TALL OIL & FATTY ACID 65 - 70% B: ASPHALTIC-TYPE MATERIAL NONE C: ACID
NUMBER, 80 - 85 MG KOH/G.
ADMIXTURE, DRILLING MUD: INVERTED EMULSION MUD COMPONENTS, TO FREE
STUCK PIPES (EMULSIFIER), SPECIAL BLEND OF LIQUID, ADMIXTURE DRILLING
MUD; LIQUID FORM,SPOTTING FLUID,FOR SOAK SOLUTION FOR FREEING STUCK
PIPE,ORGANIC CHEMICAL CONCENTRATE OF EMULSIFIERS AND LUBRICANTS,208
L OR 55 GAL DRUM,CONCENTRATE TO BE MIXED WITH DIESEL OIL OR MINERAL
OIL TO FORM STABLE INVERT EMULSION TO HELP FREE DIFFERENTIALLY STUCK
PIPE. FLASH POINT: >190 DEG F.
Saudi Aramco: Company General Use
1000022175
1000022178
5
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
14
Category
Chemicals
(Drilling Fluids)
15
Chemicals
(Drilling Fluids)
16
Chemicals
(Drilling Fluids)
17
2015
Chemicals
(Drilling Fluids)
Material Description
Material Long Description
Material Number
9COM/9CAT
FIBER, SWEEPING AGENT
ADMIXTURE: DRILLING MUD; WELLBORE CLEANING AGENT DRY PILLS, TREATED
POLYMERIZED SYNTHETIC FIBER; HOLE CLEANING AGENT ADMIXTURE DRILLING
MUD; DRY FORM,TREATED SYNTHETIC POLYPROPYLENE FIBER,FOR
TRANSPORTING DRILL CUTTINGS METAL SHAVINGS AND OTHER DEBRIS OUT OF
WELLBORE WHILE DRILLING,15 LBS PAIL,EASILY DISPERSABLE IN ALL DRILLING
FLUIDS, NON TOXIC, NON-CORROSIVE, NON-MAGNETIC, CHEMICALLY INERT AND
TEMPERATURE STABLE. COMPATIBLE IN WATER, DIESEL AND MINERAL OIL
FLUIDS. SPECIFIC GRAVITY, 0.9.
1000720919
ADMIXTURE DRILLING MUD; CLEAR LIQUID FORM,WATER SOLUBLE
LUBRICANT,FOR REDUCES TORQUE, DRAG AND FRICTION IN WATER BASED
DRILLING MUDS,ND OF SURFACTANT MIXTURES POLYOLS DESIGNED FOR USE AS
LUBRICANT - HIGH PH AND
MIUM LUBRICANT COMPATIBLE IN HIGH SALINE FLUIDS INCLUDING SATURATED
DIVALENT BRINES
NACL, KCL, NABR, K-FORMATE CALCIUM CHLORIDE FLUIDS WITHOUT GREASING
OUT AND/OR CHEESING. STABLE OVER WIDE RANGE OF TEMPERATURE UP TO
325 F DEG. THE NORMAL (PMCC).
LUBRICANT; DRILLING MUD, ADDITIVE TYPE,AMBER LIQUID FORM,55
GAL/DRUM,LUBRICANT FOR SALT WATER BASED MUD AND BRINES, DISPERSED,
SEA WATER, SALT SATURATED, FORMATS, COMPLETION, WORKOVER FLUIDS.
USED WITH BRINES, ALSO, RECOMMENDED FOR DRILL-IN FLUIDS CONTAINING
HIGH AMOUNT OF SIZEABLE CALCIUM CARBONATE, SODIUM CHLORIDE OR
CALCIUM CHLORIDE.PHYSICAL STATE @ 20 C DEG: AMBER COLOR, FAINT ODOR,
LUBRICANT SALT WATER MUD POUR POINT IS -10 C DEG MAX, SP. GR. 1.002 G/CC, VISCOSITY @ 40 C DEG IS 120
MM2/S, FLASH POINT 230 C DEG, INSOLUBLE IN WATER, DOES NOT FORM
AND BRINE
GREASING AND IT DOES NOT PHASE OUT. BOTTOM HOLE TEMP. LIMIT: 160 C
DEG(320 F), PH LIMIT MAX 10.5, REDIAGREEN EME SALT IS A MIXTURE OF FATTY
ACID, C1618 AND C18-UNSATURATED COMPOUNDS WITH 2,2,2-NITRILOTRIETHANOL AND FATTY ACIDS, ESTERS WITH POLYOL. OTHER ASSOCIATED
ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL AND/OR ADVERSELY
AFFECTED FLUID PROPERTIES.
OIL IN WATER EMULSIFIER
ADMIXTURE DRILLING MUD; THICK LIQUID FORM,FOR EFFECTIVELY EMLSIFIES
HYDROCARBONS IN BOTH FRESH & SALT WATER. USE IN LOW DENSITY OIL IN
WATER BENTONITE MUD EMULSION,55 GAL (208 LITER) DRUM,OTHER
ASSOCIATED ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL AND/OR
ADVERSELY AFFECT FLUID PROPERTIES.
Saudi Aramco: Company General Use
1000757580
1000774613
1000779780
6
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
18
Category
Chemicals
(Drilling Fluids)
Material Description
Material Long Description
ADMIXTURE DRILLING MUD; WHITE, FREE-FLOWING POWDER FORM,STABILIZED
NON-IONIC STARCH DERIVATION,FOR TO CONTROL HIGH PRESSURE AND HIGH
TEMPERATURE FILTRATION CONTROL AND MINIMIZE DAMAGE TO THE
PRODUCTIVE FORMATION,MODIFIED STARCH 60-100%, SOLID, WHITE, SG 1.5,
STABILITY TEMPERATURE: 250 DEG F, BIODEGRADABLE, SOLUBLE IN WATER,50 LB
(22.7 KG) SACK,ENHANCES THE LOW SHEAR RATE VISCOSITY OF A FLUID
CONTAINING XANTHAN GUM BIO-POLYMER. POLYMER COMBINATION IS
SYNERGISTIC AND YIELDS IMPROVED STATIC SUSPENSION. FLUID COMPOSITIONS
MIXED WITH N-DRIL HT PLUS FILTRATION CONTROL AGENT CAN BE USED TO
MODIFIED NON-IONIC STARCH
DRILL INTO PAY ZONES AND UNDER REAM. IT CAN ALSO BE USED AS 'PRE' AND
'POST' GRAVEL PACK FLUID AND AS LOST CIRCULATION PILLS. SUITABLE FOR ALL
WATER-BASED DRILLING FLUIDS, WORKOVER AND COMPLETION FLUIDS
INCLUDING SEAWATER, POTASSIUM CHLORIDE, MAGNESIUM CHLORIDE SODIUM
CHLORIDE, SODIUM BROMIDE, CALCIUM BROMIDE AND ZINC BROMIDE: RESISTS
CALCIUM CONTAMINATION OVER A WIDE PH RANGE, SOLUBLE IN ACIDS AND
OXIDIZERS CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME,
MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER.
19
Chemicals
(Drilling Fluids)
CALCIUM CARBONATE FLAKE
FINE
20
Chemicals
(Drilling Fluids)
CALCIUM CARBONATE FLAKE
MEDIUM
21
Chemicals
(Drilling Fluids)
CALCIUM CARBONATE FLAKE
COARSE
2015
ADMIXTURE DRILLING MUD; FINE WHITE FLAKES FORM,SIZED CALCIUM
CARBONATE FLAKES,FOR USED AS BRIDGING AGENT TO CONTROL DRILLING
FLUID CIRCULATION LOSSES ESPECIALLY IN GAS DRILLING,CALCIUM CARBONATE
60-100 WT% AND CRYSTALLINE SILICA UP TO 0.1 WT%,MULTI-WALLED 50 LB PER
BAG,WHITE FLAKES, SG:2.7-2.8 AT 20 DEG, ACID SOLUBILITY(10-15% HCL)99%
MIN.
ADMIXTURE DRILLING MUD; MEDIUM WHITE FLAKES FORM,SIZED CALCIUM
CARBONATE FLAKES,FOR USED AS BRIDGING AGENT TO CONTROL DRILLING
FLUID CIRCULATION LOSSES ESPECIALLY IN GAS DRILLING,CALCIUM CARBONATE
60-100 WT% AND CRYSTALLINE SILICA UP TO 0.1 WT%,MULTI-WALLED 50 LB PER
BAG,WHITE FLAKES, SG:2.7-2.8 AT 20 DEG, ACID SOLUBILITY(10-15% HCL)99%
MIN.
ADMIXTURE DRILLING MUD; COARSE WHITE FLAKES FORM,SIZED CALCIUM
CARBONATE FLAKES,FOR USED AS BRIDGING AGENT TO CONTROL DRILLING
FLUID CIRCULATION LOSSES ESPECIALLY IN GAS DRILLING,CALCIUM CARBONATE
60-100 WT% AND CRYSTALLINE SILICA UP TO 0.1 WT%,MULTI-WALLED 50 LB PER
BAG,WHITE FLAKES, SG:2.7-2.8 AT 20 DEG, ACID SOLUBILITY (10-15% HCL) 99%
MIN.
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000788390
1000813534
1000813690
1000813535
7
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
Material Description
22
Chemicals
(Drilling Fluids)
TEMPERATURE
EXTENDER/STABILIZER
23
Chemicals
(Drilling Fluids)
Temperature Stabilizer
24
Chemicals
(Drilling Fluids)
POLYSTYRENE COPOLYMER
BEADS
2015
Material Long Description
ADDITIVE DRILLING FLUID; LIQUID FORM,AMINOETHANOL,FOR POLYMER
TEMPERATURE EXTENDER/STABILIZER FOR WATER BASED DRILLING AND
COMPLETION FLUIDS BY REDUCING THE RATE OF BREAKDOWN OF POLYMERS BY
SLOWING/PREVENTING THE THERMAL DEGRADATION OF THE POLYMERS. THIS
GIVES A PRONOUNCED IMPROVEMENT IN TEMPERATURE STABILITY, ENABLING
POLYMER FLUIDS TO BE USED IN HOTTER WELLS. THE TEMPERATURE STABILITY
INCREASE BY MARGIN OF UP TO 70 DEG F. IT IS PARTICULARLY SUITED FOR USE IN
DRILLING, COMPLETION, WORKOVER AND PACKER FLUIDS.,55 GAL PER
DRUM,PPEARANCE: LIQUID COLOUR : COLORLESS GRAVITY :1.0- 1.02 ADD
SOLUBILITY IN WATER: SOLUBLE IN WATER BOILING POINT (C):> 142 C FLASH
POINT (C) : > 96 C PH : 11-12,CONTAINER MUST BE PROPERLY LABELED WITH
VENDOR'S NAME, MANUFACTURER'S NAME, GRAVITY: 1.0 - 1.02 LOCATION,
PRODUCTION DATE AND BATCH NUMBER. SAUDI SOLUBILITY IN WATER:
ARAMCO'S PERSONNEL WILL SOLUBLE IN WATER, BOILING CARRY OUT PROPER
SAMPLING POINT: > 142 DEG C, FLASH AND TESTING AS NEEDED. POINT: > 96
DEG C, PH: 11 - 12.
ADDITIVE; DRILLING MUD TYPE,FOR FREE RADICAL SCAVENGER AND
TEMPERATURE STABILIZER,COLORLESS LIQUID FORM,200
LITERS/DRUM,FUNCTIONS BY SCAVENGING FREE RADICALS AND SLOWS DOWN
THERMAL DEGRADATION OF POLYMERIC COMPONENTS, SUCH AS XANTHAN
GUM, PAC AND STARCH, IN THE DRILLING FLUID WHICH ALLOWING THE
TEMPERATURE STABILITY TO BE EXTENDED BY UP TO 50 DEG F. NORMAL
TREATMENT: 2.0 TO 4.0 LB/BBL FLASH POINT : > 195 DEG. F, SPECIFIC GRAVITY :
1.05-1.15, SOLUBILITY : SOLUBLE IN WATER, ACTIVES % W/W 68 - 72, SG @ 20° C
1.05 - 1.15.
ADMIXTURE: DRILLING MUD; DRY, LUBRA-GLIDE BEADS; DIVINYL BENZENE
COPOLYMER; DRY, COARSE GRADE; FOR REDUCING TORQUE AND DRAG.
ADMIXTURE DRILLING MUD; DRY, COARSE FORM,AA POLYSTYRENE COPOLYMER
BEAD,FOR SOLID LUBRICANT, TO REDUCE TORQUE AND DRAG WHILE DRILLING.
CHEMICALLY INERT,22.7 KGS (55 LBS) /SACK,PARTICLE SIZE DISTRIBUTION RANGE:
100 TO 1000 MICRON. COMPRESSIVE STRENGTH: 16,000 PSI. SOFTENING
TEMPERATURE: > 260 C DEG.
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000829739
1000823316
1000720918
8
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
25
Chemicals
(Drilling Fluids)
26
Chemicals
(Drilling Fluids)
27
2015
Chemicals
(Drilling Fluids)
Material Description
Material Long Description
ADDITIVE DRILLING FLUID; CREAMY COLOURED POWDER FORM,PURE GUAR
GUM,FOR USED AS COMPETITIVE SUPPLEMENTARY VISCOSIFIER FOR QUICK
VISCOSITY SWEEPS BUILDER WHILE DRILLING SURFACE HOLES WITH WATER.,25
KG METAL BAGS,IT IS PARTICULARLY USEFUL FOR OFFSHORE DRILLING, AS IT CAN
BE ADDED DIRECTLY TO SEAWATER, , WHICH ELIMINATES THE NEED FOR LARGE
QUANTITIES OF FRESH WATER AS WELL AS THE TIME REQUIRED TO PREHYDRATE
BENTONITE. IT IS AN UNTREATED GUAR GUM AND IS NON-IONIC IN NATURE. IT
GUAR GUM POWDER FORM 25 SHOWS EXCELLENT PERFORMANCE OVER A WIDE PH RANGE. IT'S
RECOMMENDED TO ADD BIOCIDE, IF GUAR GUM SOLUTION KEPT OVER A PERIOD
KG BAG
OF TIME. APPEARANCE: CREAMY COLOURED POWDER, ODOR: BEAN LIKE,
MOISTURE: 8.0% (MAXIMUM), PH: 8.0, ASH :1% (MAXIMUM), PARTICLE SIZE
THROUGH 200 MESH (75 MICRON): 95% (MINIMUM), BROOKFIELD VISCOSITY :
8000 CP (MINIMUM), (1% SOLUTION IN DISTILLED WATER AT 25 DEG. C, AFTER 24
HOURS (SPINDLE #4, 20 RPM), FANN VISCOSITY INITIAL 10 MINUTE: 42 CP
(MINIMUM), (2.00 GM / 350 MLS, IN SEA WATER, @ 511 SEC-1, F1 SPRING. SEA
WATER: 41.95 GM NACL IN 1000 MLS DISTILLED WATER.
ADDITIVE DRILLING FLUID; LIQUID FORM,POLYETHER POLYOL,FOR DEFOAMER
USED IN BOTH FRESHWATER AND SALTWATER DRILLING FLUIDS SYSTEMS,5
GALLON PAIL,DEFOAMER USED IN BOTH FRESHWATER AND SALTWATER
DRILLING FLUIDS SYSTEMS,EFFECTIVE FOR REDUCING FOAM CAUSED BY WATER
SOLUBLE GLYCOL PRODUCTS, CONTAINS NO OIL FOR CAUSING SHEEN OR SLICK
POLYETHER POLYOL DEFOAMER ON WATER SURFACE, NORMAL TREATMENT ,0.05 GAL BBL,CLEAR LIQUID, MILD
ODOR DENSITY 1003 KG/M3 8.36 LB/GAL, POUR POINT 26 DEG C, FLASH POINT
ADDITIVE, DRILLING FLUID, LIQUID, POLYETHER POLYOL DEFOAMER USED IN
BOTH FRESHWATER AND SALTWATER DRILLING FLUIDS SYSTEMS, 5 GALLON PAIL,
DEFOAMER USED IN BOTH FRESHWATER AND SALTWATER DRILLING FLUIDS
SYSTEMS, EFFECTIVE FOR REDUCING FOAM CAUSED BY WATE.
ADDITIVE DRILLING FLUID; LIQUID AQUEOUS SOLUTION FORM,MIXTURE OF
ORGANIC NOMINAL PIPE SIZE: 5-1/8 IN,FOR EMULSION BREAKER, BREAKS DOWN
CRUDE FOR THE SEPARATION OF BOTH OIL AND SOLIDS,ORGANIC,
CRUDE OIL EMULSION BRAKER BIODEGRADABLE, CITRUS ODOR,55-GALLON DRUM,MEDIUM BLUE AQUEOUS
SOLUTION, SG:1.2-1.4, PH:7-9, VISCOSITY:100 CST,FREEZE POINT: 26 DEG F,
SOLUBLE IN FRESH AND BRINE WATER, APPLIED BY BATCH OR DOWN HOLE
INJECTION METHODS.
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000824113
1000815463
1000813531
9
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
28
29
30
2015
Category
Chemicals
(Drilling Fluids)
Chemicals
(Drilling Fluids)
Chemicals
(Drilling Fluids)
Material Description
Material Long Description
ADDITIVE DRILLING FLUID; LIQUID, AQUEOUS SOLUTION FORM,MIXTURE OF
ORGANIC COMPOUNDS AND ENZYMES,FOR VISCOSITY REDUCING AGENT,
RETURNS HEAVY HYDROCARBONS TO AN OIL PHASE,ORGANIC, BIODEGRADABLE,
CITRUS ODOR,55-GALLON DRUM,MEDIUM BLUE AQUEOUS SOLUTION, SG:1.21.4, PH:7-9, VISCOSITY:200 CST,FREEZE POINT: 27 DEG F, SOLUBLE IN FRESH &
CRUDE OIL VISCOSITY REDUCER BRINE WATER AND OIL SOLUBLE, APPLIED BY BATCH OR DOWN HOLE INJECTION
METHODS, ++DESIGNED FOR THE TREATMENT OF DIFFICULT PARAFFIN AND
ASPHALTENE PROBLEMS BREAK DOWN THE LONG CHAIN AND CYCLIC PARAFFIN'S
(ALONG WITH OTHER LONG CHAIN HYDROCARBONS SUCH AS ASPHALTENES)
ALLOWING THEM TO RETURN TO THE OIL PHASE PERMANENTLY.
EC-101 cutting wash
ALL TEMP
ADDITIVE DRILLING FLUID; AQUEOUS SOLUTION FORM,MIXTURE OF ORGANIC
COMPOUNDS AND ENZYMES,FOR A NON-TOXIC ,NON- HAZARDOUS,NONFLAMMABLE NON-CORROSIVE,100% BIODEGRADABLE,WATER BASED PRODUCT
WHICH IS UTILIZED IN BUT NOT LIMITED TO THE FOLLOWING APPLICATION,DRILL
CUTTING DECONTAMINATION, TREATMENT AND DISPOSAL, HYDROCARBON
CONTAMINATED SOLIDS TREATMENT AND DE- OILING OPERATION ON ONSHORE
AND OFFSHORE OIL DRILLING RIGS,PRODUCTION PLLATFORMS AND VESSELS , OIL
SPILL CLEANUP OPERATION AND PROCESS PLANT CLEAN UP . THE PRODUCT
LEAVES NO PETROCHEMICAL DISTILLATES AFTER PROPER
TREATMENT,APPEARANCE: MEDIUM BLUE AQUEOUS SOLUTION, SPECIFIC
GRAVITY: 1.2 - 1.4 (WATER=1), PH: 7 - 9 POUR POINT : 26 DEG F FREEZE POINT: 26
░F SOLUBILITY : FRESH AND BRINE WATER,55-GAL DRUM.
ADDITIVE; DRILLING MUD TYPE,FOR USED AS HT THINNER IN WIDE RANGE OF
WATER-BASE.,SOLID - WHITE POWDER FORM,25.0 LB/BAG,USED AS HT THINNER
IN WIDE RANGE OF WATER-BASE. DOES NOT CONTAIN HEAVY METALS/CHROME
OR REQUIRE SODIUM HYDROXIDE FOR ACTIVATION AND STABLE UP TO
TEMPERATURE 400 F DEG(204 DEG). TREATMENT RANGE FROM 0.5 LB/BBL TO
3.0 LB/BBL, ODOURLESS, PH : 7-9 (1%AQ. SOLN.), SOLUBLE IN WATER, SHEAR
STRENGTH, LB/100 FT▓, 32 MAX PLASTIC VISCOSITY, CP, 32 MAX, YIELD POINT,
LB/100 FT▓, 32 MAX, 10 SECOND GEL, LB/100 FT▓, 12 MAX, 10 MINUTE GEL,
LB/100 FT▓, 38 MAX, 30 MINUTE FILTRATE, ML, 48 MAX.
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000813532
1000820609
1000823315
10
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
Material Description
31
Chemicals
(Drilling Fluids)
CHEMTROL X
32
Chemicals
(Drilling Fluids)
KEM-SEAL PLUS
33
2015
Chemicals
(Drilling Fluids)
Temperature Stabilizer
Material Long Description
ADDITIVE; ADDITIVE: DRILLING MUD TYPE,FOR PROVIDES HPHT FILTRATION
CONTROL AND RHEOLOGICAL STABILITY IN WIDE RANGE OF WATER-BASE
MUD.,SOLID - TAN TO BLACK POWDER FORM,50.0 LB/BAG,BLEND OF
DERIVATIZED ACRYLIC COPOLYMER DEFLOCCULANT AND CAUSTICIZED LIGNITE
PROVIDES HPHT FILTRATION CONTROL AND RHEOLOGICAL STABILITY IN WIDE
RANGE OF WATER-BASE MUD. INITIAL TREATMENTS OF 2.0 TO 6.0 LB/BBL.
NORMAL TREATMENT LEVELS ARE BASED ON TYPES OF WBM & NEEDED.
APPEARANCE : SOLID, TAN TO BLACK POWDER, ODOR: EARTHY, SPECIFIC
GRAVITY: 1.5 , PARTIALLY SOLUBLE IN WATER. SPECIFIC GRAVITY: 1.5 PH: 9-10
SOLUBILITY : PARTIALLY SOLUBLE IN WATER.
ADDITIVE; ADDITIVE: DRILLING MUD TYPE,FOR HTHP FILTRATION CONTROL
ADDITIVE WORK WITH ALL TYPES OF WATER BASED FLUIDS,SOLID - WHITE
POWDER FORM,25.0 LB/BAG,HTHP FILTRATION CONTROL ADDITIVE WORK WITH
ALL TYPES OF WATER BASED FLUIDS, TEMPERATURES UP TO 500 DEG. F.
TREATMENT RANGE VARIES BASED ON FILTRATE VALUE DESIRED AND WELL
TEMPERATURE, A REASONABLE RANGE WILL BE 1 TO 6 LB/BBL.IS, SHOULD BE
ADDED SLOWLY TO AVOID HIGH RAISE IN VISCOSITY. APPEARANCE : SOLID,
WHITE POWDER, ODOR:SLIGHT, SPECIFIC GRAVITY :1300 KG/M3 @ 16 DEG. C,
SOLUBILITY : SOLUBLE IN WATER, SALT/HARD WATER PERFORMANCE, FILTRATE,
ML: 17 MAX AGING PERFORMANCE, FILTRATE, ML: 19 MAX.
ADDITIVE; DRILLING MUD TYPE,FOR FREE RADICAL SCAVENGER AND
TEMPERATURE STABILIZER,COLORLESS LIQUID FORM,200
LITERS/DRUM,FUNCTIONS BY SCAVENGING FREE RADICALS AND SLOWS DOWN
THERMAL DEGRADATION OF POLYMERIC COMPONENTS, SUCH AS XANTHAN
GUM, PAC AND STARCH, IN THE DRILLING FLUID WHICH ALLOWING THE
TEMPERATURE STABILITY TO BE EXTENDED BY UP TO 50 DEG F. NORMAL
TREATMENT: 2.0 TO 4.0 LB/BBL FLASH POINT : > 195 DEG. F, SPECIFIC GRAVITY :
1.05-1.15, SOLUBILITY : SOLUBLE IN WATER, ACTIVES % W/W 68 - 72, SG @ 20° C
1.05 - 1.15.
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000823317
1000823318
1000823316
11
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
34
35
36
2015
Category
Chemicals
(Drilling Fluids)
Chemicals
(Drilling Fluids)
Chemicals
(Drilling Fluids)
Material Description
Material Long Description
Material Number
9COM/9CAT
COASTAL SPOT
ADDITIVE DRILLING FLUID; LIQUID FORM,BLEND OF POLYALPHAOLEFIN ( PAO)
SYNTHETIC HYDROCARBON, EMULSIFIERS, ACTIVATORS AND INITIATORS,FOR
SPOTTING FLUID FOR FREEING STUCK PIPE,PAO BASED PRODUCT WITH
PATENTED ADDITIVES,275 GALLON IBC CONTAINER,ADDITIVE, DRILLING FLUID:
LIQUID, BLEND OF POLYALPHAOLEFIN (PAO) SYNTHETIC HYDROCARBON,
EMULSIFIERS, ACTIVATORS AND INITIATORS, SPOTTING FLUID FOR FREEING
STUCK PIPE, PAO BASED PRODUCT WITH PATENTED ADDITIVES, 275 GALLON IBC
CONTAINER,CLEAR YELLOW LIQUID: SG:0.95-1. 05: DISPERSIBLE IN WATER: POUR
POINT: -20 DEG F, FLASH POINT GREATER 300 DEG F: REPLACEMENT FOR DIESEL
AND MINERAL OIL BASED SPOTTING FLUIDS: DEHYDRATES AND CRACKS FILTER
CAKE TO ALLOW PENETRATION AROUND THE PIPE WITH PAO TO FREE STUCK
PIPE.
1000813125
SX PLUS, 160 MICRONS
ADDITIVE DRILLING FLUID; BLACK SOLID POWDER PARTICULATES OF SPECIFIC
SIZED GRINDS FORM,HEAT TREATED CARBON BASED MATERIAL,FOR USED FOR
SEEPAGE CONTROL, BRIDGING, PLUGGING, OIL & WATER MUDS, LUBRICITY,
SEALING OF DEPLETED ZONES, PREVENTION OF STUCK PIPES,GRAPHITE
PARTICLES 40 MESH TO GRATER THAN 200 MESH ( 425 TO > 75
MICRONS),ADDITIVE, DRILLING FLUID: BLACK SOLID POWDER PARTICULATES OF
SPECIFIC SIZED GRINDS, HEAT TREATED CARBON BASED MATERIAL, USED FOR
SEEPAGE CONTROL, BRIDGING, PLUGGING, OIL & WATER MUDS, LUBRICITY,
SEALING OF DEPLETED ZONES PREVENTION OF STUCK PIPES, GRAPH GREY TO
BLACK POWDER SG 1.5 FLASH POINT > 350 DEG (F): MELTING POINT > 500 DEG
(F): PARTICLE SIZE:D90-245, D50-160, D10-111 NEGLIGIBLE SOLUBILITY IN WATER
AND OIL: USED FOR SEALING POROUS SANDS AND OTHER FORMATION TO
REDUCE DIFFERENTIAL PRESSURE TRANSFER.
1000813126
Cross-LINK LCM Retarder
ADMIXTURE DRILLING MUD; CLEAR LIQUID FORM,ADDITIVE RETARDER,FOR
CROSS-LINKING X-LINK POLYMER FOR MIXING VISCOUS PILLS FOR CURING FLUID
CIRCULATION LOSS DURING DRILLING OPERATION,CROSS LINKING MATERIAL FOR
X-LINK POLYMER,5 GALLONS PER CAN,SPECIFIC GRAVITY 1.323 @20 DEG C,
BOILING POINT 221 DEG F (105 DEG C), MOLECULAR WEIGHT 112.0, SOLUBLE IN
WATER SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT
PACKING MANUAL.
1000757568
Saudi Aramco: Company General Use
12
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
37
38
39
2015
Material Description
Material Long Description
Material Number
9COM/9CAT
Cross-LINK LCM
ADMIXTURE DRILLING MUD; POWDER, SOLID FORM,LOST CIRCULATION
MATERIAL,ECTED BY TEMPERATURE AND EXTENDERS. ND OF HIGH MOLECULAR
RETARDERS LULOSE FIBERS AND PARTICLE SS-LINKING AGENTS, G. THE CROSSLINKING IS PERATURE TOLERANT GEL-LIKE FORM STIFF, DURABLE AND PAPER
BAG,INSOLUBLE IN WATER. SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI
ARAMCO EXPORT PACKING MANUAL. THE ORIGINAL MANUFACTURER, PRODUCT
NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE
IF REQUIRED, STOCK NUMBER AND COUNTRY OF ORIGIN SHALL BE PRINTED ON
THE CONTAINER. THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG
(CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 75 LB MIN. NATURAL KRAFT PAPER
(INTERIOR PLY) 2ND PLY 75 LB MIN. NATURAL KRAFT PAPER 3RD PLY 80 LB MIN.
NATURAL KRAFT PAPER (EXTERIOR PLY).
1000757567
Chemicals
(Drilling Fluids)
BIG BAG SYSTEM COMPONENTS: CONTAINER: BIG BAG; 35 CU FT CAPACITY;
ORANGE COLOR; (FOR BARYTES). CONTAINER; BARYTE TRANSPORT TYPE,0.99 M3
(35 CU FT),BODY AND CONE SECTION: M049 LID SECTION: M426 INLET AND
OUTLET SPOUT: M326 HEAVY DUTY WIRE RING: INSERTED IN THE TOP WELDED
LID MADE FROM WIO2 MATERIAL,ORANGE,BIG BAG SYSTEM COMPONENT, IBC
BIG BAG BARITE TRANS 0.99 M3 TRANSPORT CONTAINERS LTD THERE ARE TWO (2) CERTIFICATE NUMBERS FOR
ORANGE
THE BAGS, AND THE FOLLOWING MANDATORY TEST REQUIREMENTS MUST BE
MET: A) STANDARD: BS-EN 1898-2001, CLASS: HEAVY DUTY THERMOPLASTIC,
CERTIFICATE NUMBER: 101043, APPROVED RATING: SWL: 2500KG/8:1 SF. B)
STANDARD: EFIBCA 003: 1985, CLASS: HEAVY DUTY THERMOPLASTIC,
CERTIFICATE NUMBER: 101161E APPROVED RATING: SWL: 2500KG/8:1 SF
1000029881
Chemicals
(Drilling Fluids)
BIG BAG SYSTEM COMPONENTS: CONTAINER: BIG BAG; 35 CU FT CAPACITY; BLUE
COLOR; (FOR BENTONITE). CONTAINER; BENTONITE TRANSPORT TYPE,0.99 M3
(35 CU FT),BODY AND CONE SECTION: M047 LID SECTION: M425 INLET AND
OUTLET SPOUT: M325 HEAVY DUTY WIRE RING: INSERTED IN THE TOP WELDED
LID MADE FROM WIO2 MATERIAL,BLUE,BIG BAG SYSTEM COMPONENT, IBC
BIG BAG BENTONITE TRANS 0.99 TRANSPORT CONTAINERS LTD THERE ARE TWO (2) CERTIFICATE NUMBERS FOR
M3 BLUE
THE BAGS, AND THE FOLLOWING MANDATORY TEST REQUIREMENTS MUST BE
MET: A) STANDARD: BS-EN 1898-2001, CLASS: HEAVY DUTY THERMOPLASTIC,
CERTIFICATE NUMBER: 101043, APPROVED RATING: SWL: 2500KG/8:1 SF. B)
STANDARD: EFIBCA 003: 1985, CLASS: HEAVY DUTY THERMOPLASTIC,
CERTIFICATE NUMBER: 101161E APPROVED RATING: SWL: 2500KG/8:1 SF
1000029882
Category
Chemicals
(Drilling Fluids)
Saudi Aramco: Company General Use
13
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
Material Description
40
Chemicals
(Drilling Fluids)
BIG BAG, ZIP NYLON
41
Chemicals
(Drilling Fluids)
BIG BAG, LIFTING
42
Chemicals
(Drilling Fluids)
PENETREX - ROP enhancer
43
44
2015
Chemicals
(Drilling Fluids)
Chemicals
(Drilling Fluids)
MAX-PLEX
MAX-GUARD
Material Long Description
BIG BAG SYSTEM COMPONENTS: ZIP TIES: NYLON; BIG BAG; TYPE 120-R. . TIE; ZIP
TYPE,NYLON,BIG BAG SYSTEM COMPONENT, IBC TRANSPORT CONTAINERS LTD
TYPE "120-R".
BIG BAG SYSTEM COMPONENTS: LIFTING RING: BIG BAG; TYPE 109.5. . RING; BIG
BAG LIFTING TYPE,BIG BAG SYSTEM COMPONENTS, IBC TRANSPORT CONTAINERS
LTD, TYPE 109.5.
ADMIXTURE DRILLING MUD; LIQUID FORM,ISOMERISED OLEFINS 60-90%,FOR
DESIGNED TO INCREASE RATE OF PENETRATION (ROP)IN WATER BASED DRILLING
FLUID SYSTEMS, USED IN MEDIUM TO HARD SHALES,ISOMERISED OLEFINS 6090%,55 GAL/DRUM,RECOMMENDED INITIAL TREATMENT OF 1% TO 2% BY
VOLUME SHOULD BE MADE BY INJECTION TO THE CIRCULATING SYSTEM.
ADDITIONAL CAN BE ADDED UP TO 5-6% BY VOLUME DEPENDING ON THE ROP
ACHIEVED, AMOUNT OF SHALE ENCOUNTERED, TYPE OF MUD SYSTEM AND THE
INTERVAL LENGTH COLORLESS TO LIGHT YELLOW, MILD ODOR,SG 0.84, FREEZING
POINT-10 DEG C, BOILING POINT >270OC, FLASH POINT > 136 DEG C,INSOLUBLE
IN WATER SOLUBLE IN HYDROCARBONS SHIPMENT OF PRODUCTS MUST
CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL.
Material Number
9COM/9CAT
1000029930
1000029887
1000775552
ADMIXTURE DRILLING MUD; BROWN POWDER DUST FORM,RESIN AND
ALUMINATE COMPOUND,FOR FOR REDUCING PORE PRESSURE TRANSMISSION
AND HPHT FILTRATION RATES,ALUMIUM COMPLEX-40-60%&OXYALKYLATED
ALKANOL -1-5% BY WT,50 LB BAG,USED IN FRESH UP TO SATURATED SALT WATER
BASE MUD SYSTEMS FOR STABILIZING SHALE AND PREVENTION OF BIT AND
BOTTOM HOLE ASSEMBLY BALLING BROWN COLOR, ODORLESS, SG 1.85,PH 11-12
(1% SOLUTION) TEMP. STABILITY300 DEG F, SOLUBLE IN WATER, INSOLUBLE IN
ORGANIC SOLVENTS SHIPMENT OF PRODUCTS MUST CONFORM TO SAUDI
ARAMCO EXPORT PACKING MANUAL.
1000775553
ADMIXTURE DRILLING MUD; LIQUID FORM,POLYAMINE,FOR PRIMARY CLASS
HYDRATION AND SWELLING SUPPRESSANT,AQUEOUS SOLUTUTION OF AMINE
ACID COMPLEX,55 GAL DRUM,THAT PROVIDES INHIBITION OF REACTIVE CLAY
AND GUMBO BY SUPPRESSING HYDRATION AND SWELLING WITHIN THE CLAY
MINERAL PLATELETS AMBER COLOR, MILD ODOR,SG 1.07-1.09, PH 6.8-7.2 (2%
SOLUTION),SOLUBLE IN WATER,FLASH POINT >93OC SHIPMENT OF PRODUCTS
MUST CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL.
1000775554
Saudi Aramco: Company General Use
14
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
45
Category
Chemicals
(Drilling Fluids)
Material Description
Material Long Description
Material Number
9COM/9CAT
CLAY-SEAL
ADMIXTURE CEMENT; FOR CLAYSEAL SHOULD BE ADDED DIRECTLY TO THE
SYSTEM.THIS SHOULD OCCUR AFTER PREHYDRATING.,TYPE ADMIXTURE, CEMENT
HYDRO GUARD, CLAYSEAL,ETHOXYLATED POLYAMINE,5 GAL GALLON
PAIL,APPEARANCE: TRANSPARENT YELLOW LIQUID, ODOR: AMINE, SPECIFIC
GRAVITY: 1GM/CC, SOLUBILITY: SOLUBLE IN WATER. CLAYSEAL SHOULD BE
ADDED DIRECTLY TO THE SYSTEM.THIS SHOULD OCCUR AFTER PREHYDRATING
ALL BENTONITE ADDITIONS AND ADDING FLUID LOSS ADDITIVES.INITIAL
TREATMENTS IN NONDISPERSED SYSTEMS MAY CAUSE SLIGHT FLOCCULATION
AND MAY REQUIRE A THINNER. CLAYSEAL ADDITIONS WILL BE 4-8 LB/BBL AND
FOR BEST RESULTS A MINIMUM OF 4 LB/BBL OF CLAYSEAL┐ IS REQUIRED.
1000812301
46
Chemicals
(Drilling Fluids)
GLYCOL - GEM GP
47
Chemicals
(Drilling Fluids)
BORE-HIB
2015
ADMIXTURE DRILLING MUD; DARK BROWN LIQUID FORM,POLYALKYLENE GLYCOL
OTHER ASSOCIATED ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL AND/OR
ADVERSELY AFFECT FLUID PROPERTIES.,FOR USED TO IMPROVE LUBRICITY, SHALE
STABILITY AND REDUCE BIT BALLING. NORMAL TREATMENT,POLYALKYLENENE
GLYCOL,55 GALLON DRUM,CONCENTRATION IS 2-6% BY VOLUME IN A MUD
SYSTEM BUT OPTIMUM CONCENTRATION SHOULD BE IDENTIFIED ON A CASE BY
CASE BASIS. APPEARANCE YELLOW TO BROWN LIQUID, ODOR MILD, SPECIFIC
GRAVITY 1.01, BOILING POINT (░C) 126 C, SOLUBILITY IN WATER MISCIBLE.
SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING
MANUAL.
ADDITIVE DRILLING FLUID; DARK YELLOW LIQUID FORM,GLYCERINE AND SILICATE
SALT OTHER ASSOCIATED ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL
AND/OR ADVERSELY AFFECT FLUID PROPERTIES.,FOR USED AS STABILIZER WHILE
DRILLING HIGHLY REACTIVE SHALE AND CLAYS. BORE-HIB CAN BE DEPLETED
WHEN DRILLING ANHYDRITE, GREEN. CEMEN,GLYCERINE AND SILICATE SALT
MIXTURE,55 GALLON DRUM,ADDITIVE, DRILLING FLUID: DARK YELLOW LIQUID,
GLYCERINE AND SILICATE SALT OTHER ASSOCIATED ELEMENTS MUST NOT BE
HARMFUL TO PERSONNEL AND/OR ADVERSELY AFFECT FLUID PROPERTIES USED
AS STABILIZER WHILE DRILLING HIGHLY REACTIVE SHALE AND CLAYS. BORE-HIB
CAN. APPEARANCE DARK YELLOW SHIPMENT OF PRODUCT SHALL CONFORM TO
SAUDI ARAMCO EXPORT PACKING MANUAL.
Saudi Aramco: Company General Use
1000812016
1000812015
15
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
48
49
50
2015
Category
Chemicals
(Drilling Fluids)
Chemicals
(Drilling Fluids)
Chemicals
(Drilling Fluids)
Material Description
Material Long Description
Material Number
9COM/9CAT
LC-LUBE, 300-450 MICRON
ADMIXTURE DRILLING MUD; SOLID BLACK OF SPECIFIC SIZED GRINDS
PARTICULATES FORM,PHITE H RESILIENCY SYNTHETIC,FOR WELLBORE
STRENGTHENING. DEPLETED D IN OIL OR WATER BASE MUD ES, PREVENTION OF
STUCKPIPE,50 LB (22.7 KG)/ SACK,1ST PLY OTHER ASSOCIATED ELEMENTS MUST
NOT BE HARMFUL TO PERSONNEL AND/OR ADVERSELY AFFECT FLUID
PROPERTIES. APPEARANCE: GRAY TO BLACK POWDER. ODOR: ODORLESS. SG: 1.752.5 GM/CC. SOLUBILITY: INSOLUBLE IN WATER & ACID. PARTICLE SIZE: D50: 300450 MICRON. RESILIENCY: GREATER THAN 80% AT 10,000 PSI. CONTAINER IS A
MULTI-WALLED SACK - 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY). 2ND
PLY - 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY - 80 LB MIN. NATURAL KRAFT
PAPER (EXTERIOR PLY).
1000758660
LC-LUBE Fine, 165 MICRON
ADMIXTURE DRILLING MUD; SOLID BLACK OF SPECIFIC SIZED GRINDS TICULATES
FORM,LC-LUBE FINE, GRAPHITE, SYNTHETIC,FOR USE FOR SEEPAGE CONTROL
BRIDGING, PLUGGING, OIL MUDS, WATER MUDS, LUBRICITY, SEALING OF
DEPLETED ZONES, PREVENTION OF STUCK PIPE,LC-LUBE FINE SYNTHETIC
GRAPHITE,50 LB (22.7 KG)/ SACK,1ST PLY OTHER ASSOCIATED ELEMENTS MUST
NOT BE HARMFUL TO PERSONNEL AND/OR ADVERSELY AFFECT FLUID
PROPERTIES. APPEARANCE: GRAY TO BLACK POWDER ODOR: ODORLESS SP. GR.:
2.25 GM/CC FREEZING POINT: NA MELTING POINT: >5000 F DEG SOLUBILITY:
INSOLUBLE IN WATER & ACID PARTICLE SIZE: D90 300 D50 165 D10 75
CONTAINER IS A MULTI-WALLED SACK - 75 LB MIN. NATURAL KRAFT PAPER
(INTERIOR PLY). 2ND PLY - 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY - 80 LB
MIN. NATURAL KRAFT PAPER (EXTERIOR PLY).
1000758661
MAX-SHIELD
ADMIXTURE DRILLING MUD; MILKY, WHITE LIQUID FORM,MAX-SHIELD LATEX, 60
WT%,FOR SEALING POLYMER IN WATER-BASED DRILLING FLUID SYSTEM,LATEX,
60 WT%,55 GAL/DRUM,USED TO CREATE A SEMI-PERMEABLE MEMBRANE AT
BOREHOLE, IMPROVE HOLE STABILITY AND REDUCE PORE PRESSURE
TRANSMISSION WHICH HELPS PREVENT STUCK PIPE WHEN DRILLING DEPLETED
ZONES. OTHER ASSOCIATED ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL
AND/OR ADVERSELY AFFECT FLUID PROPERTIES. NORMAL TREATMENT: 2-5 % BY
VOLUME. APPEARANCE: MILKY, WHITE LIQUID. ODOR: MILD PH: 6-9 SP. GR.: 1.05
GM/CC FREEZING POINT: 32 F DEG (0 C DEG) BOILING POINT: 212 F DEG (100 C
DEG) FLASH POINT: NA RELATIVE DENSITY: 1025 KG/M3 @ 16 C DEG. SOLUBILITY:
MISCIBLE WITH WATER VOC WEIGHT: <0.6%.
1000758663
Saudi Aramco: Company General Use
16
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
51
52
2015
Category
Chemicals
(Drilling Fluids)
Chemicals
(Drilling Fluids)
Material Description
Material Long Description
Material Number
9COM/9CAT
STEEL SEAL
ADMIXTURE DRILLING MUD; POWDER, SOLID FORM,GRAPHITE,FOR LOSS
CIRCULATION ADDITIVE TO STOP LOSSES IN POROUS AND FRACTURED
FORMATIONS,BLACK ANGULAR MATERIAL CARBON BASED MATERIAL,50 LB
BAG,FOR USE WITH SYNTHETIC AND WATER-BASED DRILLING FLUIDS IMPARTS
LUBRICITY FOR WATER BASED FLUIDS TO CONTROL SEEPAGE AND LOST
CIRCULATION 15-25 LB/BBL USED AS A BACKGROUND CONCENTRATION, 50-100
LB/BBL LCM PILL FOR SPOTTING OVER THIEF ZONES, 3-10 LB/BBL FOR LUBRICITY
IN WATER BASED FLUIDS. ODORLESS, SG 1.75, FLASH POINT >356OC,INSOLUBLE
IN WATER, PARTICLES SIZE PERCENT < 40 MESH: 100 PERCENT > 200 MESH: 95
CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME,
MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER.
THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE
AS FOLLOWS: 1ST PLY - 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY). 2ND
PLY - 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY - 80 LB MIN.
1000775555
STEEL SEAL Fine
ADMIXTURE DRILLING MUD; POWDER, SOLID FORM,GRAPHITE,FOR LOSS
CIRCULATION ADDITIVE TO STOP LOSSES IN POROUS AND MICRO-FRACTURED
FORMATIONS,GRAY-BLACK ANGULAR MATERIAL CARBON BASED MATERIAL,50 LB
SACK,FOR USE WITH SYNTHETIC AND WATER-BASED DRILLING FLUIDS IMPARTS
LUBRICITY FOR WATER BASED FLUIDS TO CONTROL SEEPAGE AND LOST
CIRCULATION 15-25 LB/BBL USED AS A BACKGROUND CONCENTRATION, 60-110
LB/BBL LCM PILL FOR SPOTTING OVER THIEF ZONES, 4-10 LB/BBL FOR LUBRICITY
IN WATER BASED FLUIDS. ODORLESS, SG 1.75,FLASH POINT >356OC,INSOLUBLE
IN WATER, PARTICLES SIZE DRY SIEVE ANALYSIS:FINE 99% MIN & REGULAR 95%
MIN. THROUGH (30 MESH) DRY SIEVE ANALYSIS:FINE 40% MIN & REGULAR 2%
MAX THROUGH (200 MESH) MEDIAN PARTICLE SIZE: 80 CONTAINER MUST BE
PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURER'S NAME,
LOCATION, PRODUCTION DATE AND BATCH NUMBER. THE CONSTRUCTION OF
THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY). 2ND PLY - 75 LB MIN.
NATURAL KRAFT PAPER. 3RD PLY - 80 LB MIN. NATURAL KRAFT PAPER (EXTERIOR
PLY) SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT SAMPLING AND TESTING AS
NEEDED.
1000775556
Saudi Aramco: Company General Use
17
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
Material Description
53
Chemicals
(Drilling Fluids)
STEEL SEAL 50
54
Chemicals
(Drilling Fluids)
CLAY-GRABBER
55
2015
Chemicals
(Drilling Fluids)
CLAY-SYNC
Material Long Description
ADMIXTURE DRILLING MUD; POWDER, SOLID FORM,SYNTHETIC GRAPHITE,FOR
LOSS CIRCULATION ADDITIVE TO STOP LOSSES IN POROUS AND MICROFRACTURED FORMATIONS,SYNTHETIC GRAPHITE,50 LB. BAG,FOR USE WITH
SYNTHETIC AND WATER-BASED DRILLING FLUIDS IMPARTS LUBRICITY FOR WATER
BASED FLUIDS GREY-BLACK ANGULAR MATERIAL,ODORLESS, SG 1.75, INSOLUBLE
IN WATER, MEDIAN PARTICLE SIZE D-50: 50 15-25 LB/BBL AS A BACKGROUND
CONCENTRATION FOR SEEPAGE AND LOST CIRCULATION CONTROL. 60-110
LB/BBL LCM PILL FOR SPOTTING OVER THIEF ZONESOR ON BOTTOM PRIOR TO
TRIPS AND 4-10 LB/BBL FOR LUBRICITY IN WATER-BASED FLUIDS. CONTAINER
MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURER'S NAME,
LOCATION, PRODUCTION DATE AND BATCH NUMBER. THE CONSTRUCTION OF
THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY). 2ND PLY - 75 LB MIN.
NATURAL KRAFT PAPER. 3RD PLY - 80 LB MIN. NATURAL KRAFT PAPER (EXTERIOR
PLY)
ADMIXTURE DRILLING MUD; LIQUID FORM,NON-IONIC LIQUID POLYMER,FOR
FLOCCULANT AND CLAY ENCAPSULATOR. IT STOPS SHALE DISPERSION AND HELPS
STABILIZE SHALES IN THE WELLBORE,HIGH MOLECULAR WEIGHT, NON-IONIC
LIQUID POLYMER,5 GAL PAIL,OPAQUE LIQUID, OFF-WHITE COLOR, PH:6.5-7.5,
CONCENTRATION 30-40 (1% ACTIVE POLYMER), SG 1.02 -1.06, STABILITY UP TO
300 DEG F, IMIISCIBLE IN WATER FOR RESULTS CLAY GRABBER FLOCULANT
SHOULD BE MIXED THROUGH A HIGH SHEAR HOPPER. 0.5-1.0 LB/BBL IN THE
HYDRO-GUARD SYSTEM. 0.25-0.5 LB/BBL FOR CLEAR WATER DRILLING. 0.5-1.0
FOR TROUBLESOME SHALES IN A WATER- BASED SYSTEM.
ADMIXTURE DRILLING MUD; GRANULES FORM,NON-IONIC 100% ACTIVE DRY
POLYMER,FOR A CLAY INHIBITOR FOR WATER BASED DRILLING FLUIDS. SHALE
STABILIZER AND WELLBORE LUBRICATOR,LOW MOLECULAR WEIGHT, NON-IONIC
DRY POLYMER,50 LB. BAG,POLYMER ADHERES TO SURFACE OF REACTIVE CLAYS
PREVENTING DISPERSION AND HYDRATION, SHOULD BE MIXED THROUGH THE
HOPPER IN THE HYDRO-GUARD SYSTEM. IF SALINITY >140,000 PPM USE 2 LB/BBL,
IF SALINITY IS<140,000 PPM, USE 3 LB/BBL OFF-WHITE GRANULES, SOLID,
ODORLESS , PH (1% SOLUTION): 6.5-7.5 , SG 1.04, 100 (%ACTIVE POLYMER), BULK
DENSITY 50 LB/FT3 @ 20OC, SOLUBLE IN WATER SHIPMENT OF PRODUCT SHALL
CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL.
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000775557
1000775561
1000775562
18
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
56
57
2015
Category
Chemicals
(Drilling Fluids)
Chemicals
(Drilling Fluids)
Material Description
Material Long Description
Material Number
9COM/9CAT
MICROWASH - OHR-759
ADMIXTURE DRILLING MUD; LIQUID FORM,N-BUTANOL,FOR USED AS A COSURFACTANT TO REMEDIATE WELLBORE DAMAGE,SURFACTANT BLEND WITH NBUTANOL 100%,55 GALLON DRUM,APPEARANCE CLEAR, COLORLESS
LIQUID,ODOR SWEET, RELATIVE DENSITY:810 KG/M3 BOILING POINT:118 DEG
C,FLASH POINT:37 DEG C, SOLUBLE IN WATER,AUTO-IGNITION TEMPERATURE
343░C. ++THIS ITEM IS ONE OF COMPONENT USED TO FORMULATE THE MICROWASH SYSTEM FOR WELLBORE REMEDIATION AND REMOVE DAMAGE TO THE
RESERVOIR DRILLED WITH INVERT EMULSION FLUIDS. ++ CONTAINER MUST BE
PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURER'S NAME,
LOCATION, PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO'S
PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED.
MICRO-WASH ACID SYSTEM CONSISTS BAKER ++ HUGHES PRODUCTS, PRIME-743,
PRIME-760, PRIME-770,OHR-759, OHR-AC, OHR-757, OHR-750 & GLACIAL ACETIC
ACID AND FORMIC ACID.
1000811421
MICROWASH - OHR-AC
ADMIXTURE DRILLING MUD; LIQUID FORM,ACID CORROSION INHIBITOR,FOR
USED AS AN ACID CONTROL ADDITIVE IN THE MICRO-WASH ACID
SYSTEM,,CONTAINING PROPARGYL ALCOHOL 5-10%,METHANOL 30-60% AND
BLEND OF NON-IONIC SURFACTANTS,55 GALLON DRUM,APPEARANCE:CLEAR
AMBER LIQUID,ODOR:SWEET,SPECIFIC GRAVITY:885-897 KG/M3,FLASH POINT:1015.6 DEG C, POUR POINT:LESS THAN -20.2 DEG C,SOLUBLE IN WATER, PH:4-6(5%
IN 25% IPA/75% WATER),FLASH POINT:10-15.6 DEG C (TAG CLOSED CUP),VAPOUR
PRESSURE:85MM HG AT 21 DEG C, ++ THIS ITEM PROVIDES CORROSION
RESISTANCE WHILE REMEDIATING WELLBORE DAMAGE AND DESTROYING OILMUD FILTER CAKE, THE PRODUCT IS BIODEGRADABLE, ACID DISPERSIBILE AND IS
TOLERANT FOR SALTS PRESENT IN ACIDS.CONTAINER MUST BE PROPERLY
LABELED WITH, VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION,
PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO'S PERSONNEL WILL
CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. ++ MICRO-WASH ACID
SYSTEM CONSISTS BAKER HUGHES PRODUCTS, PRIME-743, PRIME-760, PRIME770,OHR-759, OHR-AC, OHR-757, OHR-750 & GLACIAL ACETIC ACID AND FORMIC
ACID.
1000811422
Saudi Aramco: Company General Use
19
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
58
2015
Category
Chemicals
(Drilling Fluids)
Material Description
MICROWASH - OHR-757
Material Long Description
ADMIXTURE DRILLING MUD; LIQUID FORM,BLEND OF NON-IONIC AND ANIONIC
SURFACTANTS.FOR TO DESTROY INVERT EMULSION IN OIL-BASED MUD FILTER
CAKE AND SOILDS,SODIUM TRIDECYL ETHER SULFATE 10-20% & OTHER
COMPONENTS,275 GALLON IBC CONTAINER,ADMIXTURE, DRILLING MUD: LIQUID,
BLEND OF NON-IONIC AND ANIONIC SURFACTANTS., TO DESTROY INVERT
EMULSION IN OIL-BASED MUD FILTER CAKE AND SOILDS, SODIUM TRIDECYL
ETHER SULFATE 10- 20% & OTHER COMPONENTS, 275 GALLON IBC CONTAINER,
APPEARANCE:TRANSPARENT, YELLOW LIQUID, ODOR:DISINFECTANT,SPECIFIC
GRAVITY: 1086.5 KG/M3,. FLASH POINT >100░C SOLUBLE IN WATER, PH: 7.8 AT
25 DEG C, VISCOSITY: 28. 0CST AT 40░C.THIS MATERIAL IS USED AS ONE OF
SURFACTANT COMPONENT IN THE MICRO-WASH ACID SYSTEM IT IS BLENDED OF
NON-IONIC AND ANIONIC SURFACTANTS WITH NEAR ZERO INTERFACIAL.
CONTAINER MUST BE PROPERLY LABELED WITH:VENDOR'S NAME
MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER.
SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING
AS NEEDED. MICRO-WASH ACID SYSTEM CONSISTS BAKER HUGHES PRODUCTS:
PRIME-743, PRIME-760, PRIME-770 ,OHR- 759, OHR-AC, OHR-757, OHR- 750 &
GLACIAL ACETIC ACID AND FORMIC ACID.
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000811423
20
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
Material Description
59
Chemicals
(Drilling Fluids)
MICROWASH - OHR-750
60
Chemicals
(Drilling Fluids)
MICROWASH - PRIME-743
2015
Material Long Description
ADMIXTURE DRILLING MUD; LIQUID FORM,BLEND OF NON-IONIC AND ANIONIC
SURFACTANTS,FOR TO REMEDIATE WELLBORE DAMAGE, DESTROY INVERT
EMULSION IN OIL-BASED MUD FILTER CAKE AND WATER-WET METAL
SURFACES,ALKYPHENYL OXIDE SULPHONATES,275 GALLON IBC
CONTAINER,ADMIXTURE, DRILLING MUD: LIQUID, BLEND OF NON-IONIC AND
ANIONIC URFACTANTS, TO REMEDIATE WELLBORE DAMAGE, DESTROY INVERT
EMULSION IN OIL-BASED MUD FILTER CAKE AND WATER-WET METAL SURFACES,
ALKYPHENYL OXIDE SULPHONATES , 275 GALLON IBC CONTAINER ,
APPEARANCE:CLEAR ,YLLOW- ORANGE LIQUID, ODOR:DISINFECTANT SPECIFIC
GRAVITY:1108 KG/M3,. BOILING POINT:212?F , FLASH POINT >100░C, SOLUBLE IN
WATER : PH:5.5 AT 25?C, VISCOSITY:69CST AT 40░C PROPRIETARY BLEND THAT IS
CUSTOM DESIGNED TO DISPERSE FILTER CAKE AS A COMPONENT IN MICROWASH ACID SYSTEM TO REMOVE OBM SKIN DAMAGE AND ALLOW THE
RESERVOIR TO FLOW AT MAXIMUM POTENTIAL. IT IS BLEND OF NON-IONIC AND
ANIONIC SURFACTANTS WITH NEAR ZERO INTERFACIAL TENSION. NORMAL
TREATMENT: 10 - 25% BY VOLUME ++ CONTAINER MUST BE PROPERLY LABELED
WITH: VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION
DATE AND BATCH NUMBER.
ADMIXTURE DRILLING MUD; LIQUID FORM,GLYCEROL-BELEND OF NON-IONIC
SURFACTANTS,FOR USED FOR REMOVE OIL-WET SOLIDS FROM THE WELLBORE
AND WATER-WET METAL SURFACES.,GLYCEROL, BLEND OF NON-IONIC AND
ANIONIC SURFACTANTS,5 GALLON CAN,++ APPEARANCE OPAQUE YELLOWORANGE LIQUID, PH 7.6, SPECIFIC GRAVITY 1015 KG/M3, BOILING POINT 100
DEG, FLASH POINT GREATER THAN 93 DEG C, WATER SOLUBLE ++ FULLY
COMPATIBLE AT ALLRATIOS WITH OIL MUD SPACERS AND OIL-NORMAL ONE OF
THE SURFACTANT COMPONENTS IN THE MICRO-WASH ACID SYSTEM ++
CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME,
MANUFACTURE'S NAME LOCATION, PRODUCTION DATE AND BATCH NUMBER
SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING
AS NEEDED. CONTAINER MUST BE PROPERLY LABELED ++MICRO-WASH ACID
SYSTEM CONSISTS BAKER HUGHES PRODUCTS, PRIME-743, PRIME-760, PRIME770,OHR-759, OHR-AC, OHR-757, OHR-750 & GLACIAL ACETIC ACID AND FORMIC
ACID.
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000811424
1000811425
21
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
Material Description
61
Chemicals
(Drilling Fluids)
MICROWASH - PRIME-760
62
Chemicals
(Drilling Fluids)
MICROWASH - PRIME-770
2015
Material Long Description
ADMIXTURE DRILLING MUD; LIQUID FORM,2-BUTOXYETHANOL > 60% AND
SURFACTANTS,FOR USED TO CREATE AN EFFECTIVE PUSH PILL TO PILOT THE
DISPLACEMENT AND ACT AS NON EMULSIFIER,2-BUTOXYETHANOL > 60% AND A
BLEND OF UNSATURATED AROMATIC HYDROCARBONS, NON-IONIC SURFACTANT
AND ANIONIC SURFACTANTS,5 GALLON CAN,APPEARANCE CLEAR,`LIGHT YELLOW
LIQUID, ODOR MILD, SWEET SPECIFIC GRAVITY:920 KG/M3 FLASH POINT
64░C(PMCC),PH 4.7-5.7(75%IPA/25% WATER), SOLUBLE IN WATER, VISCOSITY: 95105 CPS AT 20 DEG C ++ USED FOR REMOVING OIL-WET DEBRIS FROM THE
METAL SURFACES, FULLY COMPATIBLE AT ALL RATIOS WITH OIL MUD SPACERS
AND ALL OIL- BASED DRILLING FLUIDS.ONE OF THE SURFACTANT COMPONENTS
IN THE MICRO-WASH ACID SYSTEM ++ CONTAINER MUST BE PROPERLY LABELED
WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION, PRODUCTION DATE
AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER
SAMPLING AND TESTING AS NEEDED CONTAINER MUST BE PROPERLY LABELED ++
MICRO-WASH ACID SYSTEM CONSISTS BAKER HUGHES PRODUCTS, PRIME-743,
PRIME-760, PRIME-770,OHR-759, OHR-AC, OHR-757, OHR-750 & GLACIAL ACETIC
ACID AND FORMIC ACID.
ADMIXTURE DRILLING MUD; LIQUID FORM,BLEND OF NON-IONIC AND ANIONIC
SURFACTANTS,FOR TO CREATE AN EFFECTIVE FOLLOW-UP DISPLACEMENT
NEWTONIAN CLEANING PILL USED TO REMOVE OIL-WET SOLIDS,BLEND OF NONIONIC AND ANIONIC SURFACTANTS,5 GALLON CAN,APPEARANCE: TURBID,`
YELLOW-ORANGE LIQUID ODOR: MILD, SWEET SPECIFIC GRAVITY: 1098 KG/M3,
FLASH POINT: GREATER THAN 100 DEG C(TCC),WATER SOLUBLE ++ FULLY
COMPATIBLE AT ALL RATIOS WITH OIL MUD SPACERS AND ALL OIL- BASED
DRILLING FLUIDS. ONE OF THE SURFACTANT COMPONENTS IN THE MICRO-WASH
ACID SYSTEM ++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S
NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH
NUMBER. ++ SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING
AND TESTING AS NEEDED. CONTAINER MUST BE PROPERLY LABELED ++ MICROWASH ACID SYSTEM CONSISTS BAKER HUGHES PRODUCTS, PRIME-743, PRIME760, PRIME-770,OHR-759, OHR-AC, OHR-757, OHR-750 & GLACIAL ACETIC ACID
AND FORMIC ACID.
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000811426
1000811427
22
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
63
64
65
2015
Category
Chemicals
(Drilling Fluids)
Chemicals
(Drilling Fluids)
Chemicals
(Drilling Fluids)
Material Description
Material Long Description
Material Number
9COM/9CAT
ACETIC ACID > 96%
ADDITIVE DRILLING FLUID; CLEAR,COLORLESS LIQUID FORM,ACETIC ACID >
96%,FOR TO ACIDIZE SOLUBLE CALCIUM CARBONATE PARTICLES IN WELLBORE
REMEDIATION,ACETIC ACID > 96%,275 GALLON IBC TOTE,CLEAR LIQUID, STRONG
PUNGENT VINEGAR ODOR DENSITY 1050 KG/M3, BOILING POINT 117 DEG C,
FLASH POINT >102.2░C, SOLUBLE IN WATER,SOLUBLE AUTO-IGNITION
TEMPERATURE 799░C. ACETIC ACID IS A COMPONENT OF THE BAKER HUGES
MICRO- WASH SYTEM TO IMPROVE WELL PRODUCTIVITY. IT IS A CARBOXYLIC
ACIDS WITH THE MOLECULAR FORMULA OF CH3COOH, NORMAL TREATMENT 1 15 % BY VOLUME. 275 GALLON IBC.
1000814796
FORMIC ACID >90%
ADDITIVE DRILLING FLUID; CLEAR,COLORLESS LIQUID FORM,FORMIC ACID
>90%,FOR TO ACIDIZE SOLUBLE CALCIUM CARBONATE IN MICRO-WASH,FORMIC
ACID >90%,55 GALLON DRUM,ADDITIVE DRILLING FLUID CLEAR,COLORLESS
LIQUID FORM,FORMIC ACID >90%,FOR TO ACIDIZE SOLUBLE CALCIUM
CARBONATE IN MICRO-WASH, FORMIC ACID >90%,55 GALLON DRUM,ADDITIVE,
DRILLING FLUID: CLEAR,COLORLESS LIQUID, FORMIC ACID >90%, TO ACIDIZE
SOLUBLE CALCIUM CARBONATE IN MICRO-WASH, FORMIC ACID >90%, 55
GALLON DRUM , ADDITIVE, DRILLING FLUID: CLEAR,COLORLESS LIQUID,FORMIC
ACID >90%, TO ACIDIZE SOLUBLE CALCIUM CARBONATE IN MICRO-WASH,
FORMIC ACID >90%, 55 GALLON DRUM.
1000811877
ADDITIVE DRILLING FLUID; LIQUID FORM,ISOPROPANOL AND HEAVY AROMATIC
PETROLEUM NAPTHA,FOR BREAKS EMULSION IN OIL BASE MUD FILTER CAKE,
USED IN PUSH PILL SPACER PRIOR TO SPOT N-FLOW 325 TREATMENT FILTER CAKE
REMOVAL,5 GALLON CAN,ADDITIVE, DRILLING FLUID: LIQUID, ISOPROPANOL AND
HEAVY AROMATIC PETROLEUM NAPTHA, BREAKS EMULSION IN OIL BASE MUD
FILTER CAKE, USED IN PUSH PILL SPACER PRIOR TO SPOT N-FLOW 325
TREATMENT FOR FILTER CAKE REMOVAL, ISOPROPANOL AND HEAVY AROMATIC
PETROLEUM NAPTHA, 5 GALLON CAN, APPEARANCE: CLEAR LIGHT AMBER,
ALCOHOL ODOR, SPECIFIC GRAVITY: 0.92 @ 20 DEG C BOILING POINT: 92 DEG C,
DISPERSES IN WATER. ++ PREVENTS OIL WET FINES FROM STABILIZING
EMULSIONS, NORMAL USE CONCENTRATION: 0.1 - 2.0 % V/V. NONIONIC
NONEMULSIFIER BLEND, PRIMARILY DESIGNED FOR ACIDIZING LIMESTONE,
DOLOMITE AND SANDSTONE FORMATION & FRACTURE TREATMENT.
1000811529
N-FLOW - LOSURF-259
Saudi Aramco: Company General Use
23
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
66
67
2015
Category
Chemicals
(Drilling Fluids)
Chemicals
(Drilling Fluids)
Material Description
Mutual Solvent - MUSOL
N-FLOW 325
Material Long Description
ADDITIVE DRILLING FLUID; LIQUID FORM,ETHYLENE GLYCOL MONOBUTYL ETHER
SOLVENT,FOR REDUCE OIL WET TENDENCIES AND IMPROVE THE OVERALL
WETTING CONDITION OF THE FORM,ETHYLENE GLYCOL MONOBUTYL ETHER,55
GALLON DRUM,ADDITIVE, DRILLING FLUID: LIQUID, ETHYLENE GLYCOL
MONOBUTYL ETHER SOLVENT, USED WITH NONANIONIC SURFACTANT (LOSURF259) TO REDUCE OIL WET TENDENCIES AND IMPROVE THE OVERALL WETTING
CONDITION OF THE FORM, ETHYLENE GLYCOL MONOBUTYL ETHER, 55 GALLON
DRUM , APPEARANCE: COLORLESS LIQUID, MILD ODOR, SPECIFIC GRAVITY: 0.9 @
20 DEG C BOILING POINT: 171 DEG C SOLUBLE IN WATER. ++ PREVENTS OIL WET
FINES FROM STABILIZING' EMULSIONS, NORMAL USE CONCENTRATION: 10 %
V/V. PRIMARILY USED DURING ACIDIZING OPERATIONS IN SILICATE FORMATION.
++ CONTAINER MUST BE PROPERLY LABELED WITH VENDOR'S NAME,
MANUFACTURE'S NAME LOCATION, PRODUCTION DATE AND BATCH NUMBER
SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING
AS NEEDED ++ N-FLOW 325 SYSTEM CONSISTS OF HALLIBURTON BAROID
PRODUCTS LOSURF-259, MUSOL, N-FLOW 325 & BDF-443.
ADDITIVE DRILLING FLUID; LIQUID FORM,DIETHYLENE GLYCOL DIFORMATE,FOR
RELEASED FORMIC DISSOLVES CALCIUM CARBONATE TO REMOVE FILTER CAKE
AND REPAIR FILTER CAKE AND REPAIR MUD DAMAGE,DIETHYLENE GLYCOL
DIFORMATE,55 GALLON DRUM,ADDITIVE, DRILLING FLUID: LIQUID, DIETHYLENE
GLYCOL DIFORMATE , RELEASED FORMIC DISSOLVES CALCIUM CARBONATE TO
REMOVE FILTER CAKE AND REPAIR MUD DAMAGE, DIETHYLENE GLYCOL
DIFORMATE, 55 GALLON DRUM , APPEARANCE: LIGHT YELLOW LIQUID,ODOR:
CHARACTERISTIC, SPECIFIC GRAVITY 1.2 GM/CC, BOILING POINT:240 DEG C,
PH:2.8 SOLUBLE IN WATER ++ COMPATIBLE WITH OIL, FORMATION BRINE AND
DRILL- IN FLUID BASE OIL (DIESEL), THE CHEMICAL IS DISSOLVED IN THE CARRIER
BRINE, BECAUSE THE ACID LIBERATION ACTION IS SLOW. ACID WILL BE
GENERATED OVER THE SUBSEQUENT PERIOD OF TIME, NORMAL CO.
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000811540
1000811647
24
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
68
Category
Chemicals
(Drilling Fluids)
Material Description
Material Long Description
Material Number
9COM/9CAT
N-FLOW - BDF-443
ADDITIVE DRILLING FLUID; LIQUID FORM,SURFACTANT,FOR VALUE EMULSIFIER,
CHANGES THE WETTABILITY OF OIL MUD FILTER CAKE, FOR ACID
CLEANING,BLEND OF PROPRIERATORY CHEMICALS,55 GALLON DRUM,ADDITIVE,
DRILLING FLUID: LIQUID, SURFACTANT, EMULSIFIER, CHANGES THE WETTABILITY
OF OIL MUD FILTER CAKE, FOR ACID CLEANING, BLEND OF PROPRIERATORY
CHEMICALS, 55 GALLON DRUM , APPEARANCE: MILKY TO PALE YELLOW LIQUID,
ODOR: MILD SWEET, SPECIFIC GRAVITY 1.04 GM CC, BOILING POINT: 240 DEG C,
PH 5 - 7.5 (2.5 %), FLASH POINT: GREATER THAN 100 DEG C, SOLUBLE IN WATER
++ IS WATER WET SURFACTANT DISSOLVED IN THE CARRIER BRINE ALONG WITH
N-FLOW. IT CHANGES THE WETTABILITY OF OIL MUD FILTER CA.
1000812034
69
Chemicals
(Drilling Fluids)
LIQUID THINNER - 450 F
70
Chemicals
(Drilling Fluids )
NONTREATED SODIUM
BENTONITE 1000KG Bag
2015
ADMIXTURE: DRILLING MUD; 25 KG DRUM. . . ADMIXTURE DRILLING MUD;
LIQUID FORM,MODIFIED ANIONIC SULPHONATED POLYACRYLATE,FOR
POLYMERIC DEFOCCULANT AND THINNER FOR USE IN LOW LOW SOLID NON
DISPERSED WATER BASE MUD TO IMPACT HIGH TEPERATURE STABILITY,5 GAL
PER CAN,UP TO 234 DEG C (450 DEG F), FOR DEEP WELL APPLICATIONS.
EFFECTIVE IN THE PRESENCE OF DIVALENT IONS AND SALTS.
ADMIXTURE, DRILLING MUD GROUND NONTREATED BENTONITE ADMIXTURE
DRILLING MUD; DRY, FREE FLOWING POWDER FORM,BENTONITE SODIUM
MONTMORILLONITE,FOR VISCOSIFIER AND FILTRATE REDUCER FOR WATERBASED FLUIDS,NATURAL SMECTITE (SODIUM MONTMORILLONITE) THAT
CONTAINS NO POLYMERS OR ANY OTHER CHEMICALS,RE-USABLE SUPER SACK,API
13A AND API 13 I (LATEST EDITION),THE ORIGINAL MANUFACTURER, PRODUCT
NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION
DATE, STOCK NUMBER SHOULD BE PROVIDED BY THE MANUFACTURER. REUSABLE SUPER SACK CONTAINER SHOULD BE SEALED, MULTI-LINED AND MADE
OF WATERPROOF MATERIAL. OTHER ASSOCIATED ELEMENTS IN THE
COMPOSITION MUST NOT BE HARMFUL TO PERSONNEL AND/OR ADVERSELY
AFFECT FLUID PROPERTIES. PROPER TUBE SAMPLING AND QUARTERING TO BE
CARRIED OUT BY TRAINED AND EXPERIENCED PERSONNEL.
Saudi Aramco: Company General Use
1000021600
1000021552
25
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
71
Chemicals
(Drilling Fluids)
72
Chemicals
(Drilling Fluids )
2015
Material Description
Material Long Description
ADMIXTURE: DRILLING MUD; VISCOSIFIER; HYDROXY ETHYL CELLULOSE (HEC),
EXTREMELY HIGH-YIEDLING ADMIXTURE DRILLING MUD; DRY FREE FLOWING
WHITE POWDER FORM,HYDROXY ETHYL CELLULOSE (HEC),FOR MULTI-PURPOSE
VISCOSIFYING POLYMER RAPIDLY SOLUBLE IN FRESHWATER, SEA WATER SALT
SATURATED WATER AND COMPLEX BRINE SYSTEMS. IT IS STABLE AT 250 DEG
F.,HYDROXY ETHYL CELLULOSE (HEC),25 KG OR 50 LB BAG,WATER-SOLUBLE, NONIONIC, HIGH MOLECULAR WEIGHT POLYMER, SHIPMENT OF PRODUCT SHALL
CONFORM TO SAUDI NOTE: THE CONSTRUCTION OF THE MULTI-WALLED PAPER
HYDROXY ETHYL CELLULOSE
BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY (INTERIOR PLY) 10# PE
(HEC)
COATING 0.000285 MICRON ALUMINUM SHEET 6# PE COATING 50 LB NATURAL
KRAFT PAPER. THE ALUMINUM SHEET IS COATED ON ONE SIDE WITH 10# PE THE
10# PE IS NEXT TO THE PRODUCT. THE COATED ALUMINUM SHEET IS LAMINATED
TO THE 50 LB KRAFT PAPER. 2ND PLY 50 LB NATURAL KRAFT PAPER. 3RD PLY 50
LB NATURAL KRAFT PAPER. 4TH PLY 50 LB BLEACHED WHITE NATURAL KRAFT
PAPER (EXTERIOR PLY). THE BLEACHED PAPER IS "FULLY BLEACHED WHITE". THE
BAG MUST BE VALVE/SPOUT TYPE, COMPLETELY SEALED AND MOISTURE AND
WATER PROOF.
ADMIXTURE: DRILLING MUD; SODIUMCHLORIDEADMIXTURE DRILLING MUD;
DRY, FREE FLOWING COLORLESS/ WHITEGRANULES OR CRYSTALS, MAIN
COMPONENT FORM,SODIUM CHLORIDE(NACI),FOR A WATER SOLUBLE
WEIGHTING AGENT FOR FORMULATINGSOLIDS FREE COMPLETION BRINES. TO
FORMULATE CLEAR SOLUTIONWITHOUT SUSPENDED MATTERS. ALSO, SALT
SATURATED DRILLING FLUIDSARE USED FOR DRILLING EVAPORITE SALT
SECTIONS.,SODIUMCHLORIDE,1000 KG OR 2200 LB BAG,FREE FLOWING, 0.04 MM0.4 MMGRAIN, SIZE NON-BREATHABLE FABRIC BAG W/ DISPOSABLE
LIFTINGSTRAP, STACKABLE W/O PALLET & WITHOUT BOTTOM SPOUT, MIN
SODIUM CHLORIDE (NACI 99%) TENSILESTRENGTH FACTOR 5 NORMAL HANDLING, SLNN-99SS MOISTURE-PROOF
BIGBAGS W/LIFTING STRAPS, CONTAINER PROPERLY LABELED, W/
VENDOR'SNAME, MANUFACTURER'S NAME AND LOCATION, PRODUCTION DATE
ANDBATCH NO, NO PARTICLES GREATER THAN 5MM IN ANY DIMENSION.THE
DISPOSABLESUPER SACKS SHOULD HAVE AT# LEAST 75% OF THEIR SHELF
LIFEREMAINING (THE # PERIOD FROM THE DATE OF MANUFACTURE TO#
THEWARRANTED EXPIRATION DATE) WHEN # SHIPPED OR RECEIVED
ATDESIGNATED PLACE OF # DELIVERY TO SAUDI ARAMCO.# REFER TO
SAPNUMBER: 1000840600 FOR # DISPOSABLE SUPER SACKS SPECIFICATION.
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000021672
1000021741
26
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
73
Chemicals
(Drilling Fluids )
74
Chemicals
(Drilling Fluids)
2015
Material Description
Material Long Description
ADMIXTURE: DRILLING MUD; 50 KG (100 LB) SACK; POTASSIUM CHLORIDE
(MURIATE OF POTASH) ADMIXTURE DRILLING MUD; DRY, WHITE FREE FLOWING
GRANULES FORM,POTASSIUM CHLORIDE,FOR PROVIDES POTASSIUM IONS IN
WATER- BASED DRILLING FLUIDS TO INHIBIT SHALE HYDRATION, SWELLING AND
DISPERSION. ALSO USED TO FORMULATE COMPLETION BRINE,POTASSIUM
CHLORIDE,50 KG OR 100 LB BAG,SHIPMENT OF PRODUCT SHALL CONFORM TO
SAUDI ARAMCO EXPORT PACKING MANUAL MULTI-MOISTURE-PROOF
POLYETHYLENE LINED BAGS. NO PARTICLES GREATER THAN 2MM IN ANY
POTASSIUM CHLORIDE (KCL 97DIMENSION NOTE: THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG
98 WT MIN)
(CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 50 LB MIN. NATURAL KRAFT PAPER
(INTERIOR PLY) 2ND PLY 50 LB MIN. NATURAL KRAFT PAPER 3RD PLY SEPARATE
INNER BAG LINER, HIGH DENSITY ORIENTED AND CROSS-LAMINATED INNER
LINER (TUBULAR SHAPE) MADE OF POLYETHYLENE RESIN MATERIAL WITH A
MINIMUM WALL THICKNES OF 0.1 MM. 4TH PLY 50 LB MIN. NATURAL KRAFT
PAPER. 5TH PLY 60 LB MIN. NATURAL KRAFT PAPER WET STRENGTH (EXTERIOR
PLY) THE BAG MUST BE VALVE/SPOUT TYPE, COMPLETELY SEALED, MOISTURE
AND WATER PROOF.
ADMIXTURE COMPONENTS: XANTHAN GUM BIO-POLYMER; 25 KG (50 LB) BAG.
ADMIXTURE DRILLING MUD; DRY FREE FLOWING POWDER FORM,PURE XANTHAN
GUM BIO-POLYMER,FOR PRIMARILY USED FOR VISCOSITY/ SUSPENSION IN FRESH
WATER, SEA WATER, & SATURATED BRINE-BASED DRILLING, WORKOVER &
COMPLETION FLUIDS,PURE XANTHAN GUM BIO-POLYMER,25 KG OR 50 LB
XANTHAN GUM (POWDER)
BAG,SHIPMENT AND PACKING: 25 KG (50 LB) SEALED MULTI-WALL PAPER BAG
(WITH INNER POLYETHYLENE BAG TO PREVENT MOISTURE CONTACT), SHIPMENT
OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL.
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000021744
1000021930
27
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
75
76
2015
Category
Chemicals
(Drilling Fluids)
Chemicals
(Drillning Fluids)
Material Description
ORGANOPHILIC CLAY - 400F
LUBRICANT WBM
Material Long Description
INVERTED EMULSION MUD COMPONENTS: 25 KG (50 LB) BAG; POWDER; DRY
WHITE, ADMIXTURE DRILLING MUD; WHITE, DRY, FREE FLOWING POWDER, FREE
OF LUMPS FORM,OIL-BASED DRILLING FLUID GELLING AGENT,FOR HELPS
VISCOSIFY ANY OIL- BASED DRILLING FLUIDS HELPS IMPROVED HOLE CLEA- NING
DURING DRILLING AND WORKOVER OPERATIONS DRILL OIL MUDS FOR LONG
TERM SUSPENSION OF WEIGHTING AGENTS IN PACKER FLUIDS & CASING
PACKS.,AMINE TREATED BETONITE, A BENTONITE CLAY THAT HAS BEEN TREATED
WITH AN AMINE COMPOUND TO PROMOTE ITS DISPERSION/YIELD IN OILS.,22.7
KG (50 LB) MULTI-WALL SACKS.,SPECIFIC GRAVITY: 1.57 TO 1.70 APPEARANCE:
OFF-WHITE TO TAN POWDER ODOR/TASTED: SLIGHT, AMINE SOLUBILITY:
INSOLUBLE IN WATER DISPERSIBLE IN ORGANIC SOLVENTS. DECOMPOSITION
TEMP: >200C DEG FLASH POINT: NON- FLAMMABLE REACTIVITY: CHEMICALLY
STAB,ORGANOPHILIC CLAY, USED TO IMPART VISCOSITY AND SUSPENSION
PROPERTIES TO OIL-BASED DRILLING FLUIDS ORGANOPHILIC CLAY VISCOSIFIER
TEMPERATURE APPROACHING APPROACHING 400 F DEG (20C DEG) IMPROVES
FILTER. CAKE QUALITY AND FILTARATION-CHARACTERISTICS PROVIDES GELSTRUCTURE AND VISCOSITY FOR THE- SUSPENSION OF WEIGHT MAERIALS
VICOSITY FOR IMPROVED- HOLE CLEANING CAPACITY EFFECTIVE GELLING AGENT
IN CASING PACKS AND PACKER FLUIDS.
LUBRICANT: DRILLING MUD; DIAMINE AND FATTY ACID WITH ALCOHOL AMIDE IN
VEGETABLE OIL LUBRICANT; DRILLING MUD TYPE,LIQUID, SOLIDS FREE, AMBER
FORM,208.2 L (55 GAL) DRUM,NON-TOXIC LUBRICANT FOR REDUCING
ROTATIONAL TORQUE, DRAG AND BIT BALLING, CAUSE NO ADVERSE EFFECTS ON
MUD PROPERTIES AND CAN BE USED IN ALL DIFFERENT TYPES OF WATER-BASED
FLUIDS. THE PRODUCT MUST BE EFFECTIVE OVER A WIDE TEMPERATURE RANGE
IN THE PRESENCE OF CONTAMINANTS INCLUDING HIGH SOLIDS, HIGH CALCIUM
OR MAGNESIUM. SHOULD NOT CAUSE FOAM OR GREASE OUT. DRUMS MUST BE
MARKED WITH: VENDORS'S NAME & LOCATION, PRODUCTION DATE, BATCH NO.,
PURCHASE ORDER NO., AND STOCK NO.
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000022174
1000022179
28
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
77
78
Category
Chemicals
(Drilling Fluids )
Chemicals
(Drilling Fluids)
79
Chemicals
(Drilling Fluids)
80
Chemicals
(Drilling Fluids)
2015
Material Description
Material Long Description
Material Number
9COM/9CAT
CEMENT CLASS "G", Bulk
ADDITIVE: CEMENT; BULK DELIVERY IN TN. CEMENT; OIL WELL TYPE,BULK
TONS,API SPEC 10 CL G TYPE HSR,HIGH SULPHATE-RESISTANT. PRODUCT
MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF
ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO). THE ORIGINAL
MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF
MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE PRINTED ON THE
CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS AND/OR PAPER BAGS.
1000022631
ADMIXTURE DRILLING MUD; LIQUID FORM,POTASSIUM FORMATE SOLUTION
(KCOOH & H20),FOR FORMULATING SOLIDS FREE WORKOVER FLUIDS FOR USE IN
THE KHUFF AND PRE-KHUFF FORMATION,POTASSIUM FORMATE 75% AND
POTASSIUM FORMATE (75% SOL, WATER 25% SOLUTION, CLEAR LIQUID, DENSITY 1570 KG/M3 @ 20 DEG C, PH
WATER 25%)
10.0 @ 25 DEG C,1000 LITER (1570 KG) IBC OR TOTE CONTAINER (CO),IRON LESS
THAN 10 PPM, CHLORIDE CONTENT LESS THAN 40 PPM, TURBIDITY MAX 10 NTU,
SOLUBLE IN ALL PROPORTIONS IN WATER EXPORT PACKING MANUAL.
1000774250
ADMIXTURE DRILLING MUD; FREE FLOWING SOLID CRYSTALS FORM,POTASSIUM
FORMATE 97% WEIGHT (KCOOH),FOR FORMULATING SOLIDS FREE WORKOVER
FLUIDS FOR USE IN THE KHUFF AND PRE-KHUFF FORMATION,POTASSIUM
POTASSIUM FORMATE CRYSTALS FORMATE 97% WEIGHT & CONDITIONING AGENT 3% WEIGHT, POWDER, WHITE
COLOR, BULK DENSITY 1080 KG/M3,25 KG MULTI-WALL SACK,SPECIFIC GRAVITY
(97% KCOOH)
(POWDER ONLY) 1.91, SOLUBILITY IN WATER 355 GR/100 ML @ 20 DEG C ,
MELTING POINT 169 DEG C TEMPERATURE STABILITY UP TO 400 ░F (204 ░C),
SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING
MANUAL.
ADMIXTURE DRILLING MUD; FREE FLOWING GRANULES FORM,SODIUM
FORMATE POWDER 98% (NACOOH),FOR FORMULATING SOLIDS FREE WORKOVER
FLUIDS FOR USE IN THE KHUFF AND PRE-KHUFF FORMATION,SODIUM FORMATE
SODIUM FORMATE POWDER 98% WEIGHT & OTHER ORGANICS 2% WEIGHT, WHITE COLOR, BULK DENSITY 900950 KG/M3,25 KG MULTI-WALL SACK,SPECIFIC GRAVITY (POWDER ONLY) 1.92,
(98% NACOOH)
SOLUBILITY IN WATER 81GR/100 ML @ 20 DEG C , MELTING POINT 253 DEG C ,
TEMPERATURE STABILITY UP TO 400 ░F (204 ░C), SHIPMENT OF PRODUCT SHALL
CONFORM TO SAUDI ARAMCOEXPORT PACKING MANUAL.
Saudi Aramco: Company General Use
1000774251
1000774252
29
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
81
Category
Chemicals
(Drilling Fluids)
82
Chemicals
(Drillning Fluids)
83
Chemicals
(Drilling Fluids)
2015
Material Description
Material Long Description
Material Number
9COM/9CAT
LIGNITE
ADDITIVE DRILLING FLUID; POWDER FORM,LIGNITE / CRYSTALLINE SILICA,
QUARTZ,FOR USED TO AID IN FILTRATION CONTROL AND CONTROL VISCOSITY
AND GEL STRENGTHS OF WATER-BASED DRILLING FLUIDS,SACK PACKING (25 KG
OR 50 LB),USED TO APPEARANCE: BLACK POWDER, COLOUR: BLACK,
ODOUR/TASTE: ODORLESS, SPECIFIC GRAVITY: 1.7, SOLUBILITY IN WATER:
INSOLUBLE, BULK DENSITY AT 20 DEG C: 40 LBS/FT3, USED TO EMULSIFY OIL INTO
WATER-BASED FLUIDS, SHIPMENTS OF PRODUCT SHALL CONFORM TO SAUDI
ARAMCO EXPORT PACKING MANUAL.
1000827162
ADMIXTURE: DRILLING MUD; 208 LITER (55 GAL) DRUM. CALCIUM BROMIDE
ADMIXTURE DRILLING MUD; SINGLE SALT (CABR2), SOLIDS-FREE BRINE
FORM,CALCIUM BROMIDE (CABR2),FOR A SOLIDS-FREE BRINE USED IN
CALCIUM BROMIDE (SOL 53% WT COMPLETION FLUIDS AND CAN BE BLENDED WITH ZINC/CALCIUM BROMIDE AND
MINIMUM)
CALCIUM CHLORIDE SOLUTIONS TO FORMULATE NON- DAMAGING FLUIDS OF
DENSITIES 87.5 PCF (11.7 LB/GAL) TO 113 PCF (15.1 LB/GAL),CALCIUM BROMIDE
(53% SOLUTION),208 L OR 55 GAL OR 340 KG DRUM,POLYPROPYLENE-LINED
STEEL DRUMS.
ADMIXTURE: DRILLING MUD POLYANIONIC CELLULOSE DERIVATIVE (REGULAR)
PAC-R ADMIXTURE DRILLING MUD; DRY, FREE FLOWING POWDER
FORM,POLYANIONIC CELLULOSE,FOR USED AS A FILTRATE REDUCER AND
SUPPLEMENTARY VISCOSIFIER TO FORM A THIN, RESILIENT FILTER CAKE. IT IS
EFFECTIVE IN FRESH WATER, SEA WATER AND SALT SATURATED FLUIDS,PURE,
SALT-FREE POLYANIONIC CELLULOSE POLYMER,MULTI-WALLED BAGS, 25 KG OR
50 LB BAG,API 13 I SUPPLEMENT-2, SECTION 22 (MAY, 2000 OR LATEST
EDITION),OTHER ASSOCIATED ELEMENTS IN THE COMPOSITION MUST NOT BE
HARMFUL TO PERSONNEL AND/OR ADVERSELY AFFECT FLUID PROPERTIES.
POLYANIONIC CELLULOSE
PROPER TUBE SAMPLING AND QUARTERING TO BE CARRIED OUT BY TRAINED
REGULAR (PAC-R)
AND EXPERIENCED PERSONNEL. POLYANIONIC CELLULOSE, PAC-R SHALL NOT
CONTAIN ANY OTHER POLYSACCHARIDES SUCH AS STARCH, GUAR, OR OTHER
POLYMERS OR THEIR DERIVATIVES NOTE: THE CONSTRUCTION OF THE MULTIWALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 50 LB MIN.
NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 50 LB MIN. NATURAL KRAFT
PAPER 3RD PLY SEPARATE INNER BAG LINER, HIGH DENSITY ORIENTED AND
CROSS-LAMINATED INNER LINER (TUBULAR SHAPE) MADE OF POLYETHYLENE
RESIN MATERIAL WITH A MINIMUM WALL THICKNESS OF 0.1 MM. 4TH PLY 50 LB
MIN.
Saudi Aramco: Company General Use
1000021557
1000021605
30
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
84
85
2015
Category
Material Description
Material Long Description
Material Number
9COM/9CAT
Chemicals
(Drilling Fluids)
ADMIXTURE: DRILLING MUD; 25 KG (50 LB) SACK; SHIPMENT OF PRODUCT SHALL
CONFORM TO SAUDI ARAMCO EXPORT ADMIXTURE DRILLING MUD; POWDER
FORM,MODIFIED CHROME FREE LIGNOSULFONATE,FOR DISPERSANT FOR
REDUCING VISCOSITY & GELS IN SALTY, GYPPY & FRESH WATER MUDS,25 KG OR
50 LB BAG,API 13A,FREE FLOWING, SHIPMENT OF PRODUCT SHALL CONFORM TO
SAUDI ARAMCO EXPORT PACKING MANUAL NOTE: THE CONSTRUCTION OF THE
MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 50 LB
CHROME FREE LIGNOSULFONATE
MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 50 LB MIN. NATURAL
KRAFT PAPER 3RD PLY SEPARATE INNER BAG LINER, HIGH DENSITY ORIENTED
AND CROSS-LAMINATED INNER LINER (TUBULAR SHAPE) MADE OF
POLYETHYLENE RESIN MATERIAL WITH A MINIMUM WALL THICKNES OF 0.1 MM.
4TH PLY 50 LB MIN. NATURAL KRAFT PAPER. 5TH PLY 60 LB MIN. NATURAL KRAFT
PAPER WET STRENGTH (EXTERIOR PLY) THE BAG MUST BE VALVE/SPOUT TYPE,
COMPLETELY SEALED, MOISTURE AND WATER PROOF.
1000021670
Chemicals
(Drilling Fluids )
ADMIXTURE: DRILLING MUD; GROUND MARBLE: FINE GRADE; 9-11 MICRON
PARTICLE SIZE; PURE METAMORPHOSED ADMIXTURE DRILLING MUD; DRY, FREE
FLOWING GRANULES FORM,CALCIUM CARBONATE (CACO3)
METAMORPHOSED,FOR USED AS WEIGHTING, BRIDGING AND FILTRATE CONTROL
AGENT IN BRINE-BASED OIL-BASED AND SALT SATURATED FLUIDS,GROUND
MARBLE FINE, 9-11 MICRON PURE METAMORPHOSED CALCIUM CARBONATE
CACO3 & CAMG (CO3)2,BREATHLESS 1000 KG OR 2200 LB BAG,PROPERLY
LABELED, VENDOR'S NAME, MANUFACTURER'S NAME AND LOCATION,
PRODUCTION DATE,BATCH NO. AND STOCK NO. SIZED METAMORPHIC CALCIUM
CARBONATE GROUND LIMESTONE OR BLENDS W/LIMESTONE ARE NOT
ACCEPTABLE 9-11 MICRON PARTICLE, 95% SOLUBLE IN 15% HCL ACID, TYPE
"MEDIAN D-50", LIFTING STRAP BAG IS DISPOSABLE, WATERPROOF, UV
STABILIZED, STACKABLE & WITHOUT BOTTOM SPOUT, MINIMUM TENSILE
STRENGTH FACTOR 5 FLEXURAL STRENGTH SUFFICIENT TO SUSTAIN NORMAL
HANDLING & OUTDOOR STORAGE FOR THE PRODUCT'S SHELF LIFE IN SAUDI
ARABIAN CLIMATIC CONDITIONS.PRODUCT MANUFACTURER AND OR SUPPLIER
REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF
ORIGIN (COO).THE DISPOSABLE SUPER SACKS SHOULD HAVE AT# LEAST 75% OF
THEIR SHELF LIFE REMAINING (THE # PERIOD FROM THE DATE OF MANUFACTURE
TO# THE WARRANTED EXPIRATION DATE) WHEN # SHIPPED OR RECEIVED AT
DESIGNATED PLACE OF # DELIVERY TO SAUDI ARAMCO.
1000021813
MARBLE FINE, PURE CaCO3 2200 LB BAGS
Saudi Aramco: Company General Use
31
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
Material Description
86
Chemicals
(Drilling Fluids)
DETERGENT
87
Chemicals
(Drilling Fluids )
NON-IONIC POTATO STARCH
88
2015
Chemicals
(Drilling Fluids)
Material Long Description
CALCIUM CHLORIDE (77-78%)
2200 lb/BAG
AGENT: WELL STIMULANT; 20 LITER (5GAL.) CAN. . AGENT WELL STIMULANT; FOR
SURFACTANT & DETERGENT FOR DRILLING WATER & LOW SOLID MUD,LIQUID
FORM,20 L OR 5 GAL CAN.
ADMIXTURE: DRILLING MUD; 25 KG BAG; POTATO STARCH STABLE AGAINST
BACTERIA ADMIXTURE DRILLING MUD; DRY, FREE FLOWING COARSE
GRANULATED POWDER FORM,POTATO STARCH,FOR PROVIDES FILTRATE
CONTROL W/MINIMUM VISCOSITY BUILDUP. THE PRODUCT IS A NON-IONIC
POLYMER USED IN WATER- BASED FLUIDS WITH HIGH CONCENTRATIONS OF
MONOVALENT AND DIVALENT CATIONS OR COMBINATIONS OF ELECTROLYTES
AND IN CLAY-FREE, NON-DISPERSIVE SYSTEMS,POTATO STARCH,25 KG OR 50 LB
BAG,NO PARTICLES (RESIDUE) GREATER THAN 2000 MICROMETERS SHIPMENT OF
PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL.
MULTI-WALLED BAGS, SEALED WITH INNER POLYETHYLENE COATING, MAIN
COMPONENT PREGELATINZED, NON- FERMENTING POTATO CONSTRUCTION OF
THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 50
LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 50 LB MIN. NATURAL
KRAFT PAPER 3RD PLY SEPARATE INNER BAG LINER, HIGH DENSITY ORIENTED
AND CROSS-LAMINATED INNER LINER (TUBULAR SHAPE) MADE OF
POLYETHYLENE RESIN MATERIAL WITH A MINIMUM WALL THICKNESS OF 0.1
MM. 4TH PLY 50 LB MIN. NATURAL KRAFT PAPER. 5TH PLY 60 LB MIN. NATURAL
KRAFT PAPER WET STRENGTH (EXTERIOR PLY) THE BAG MUST BE VALVE/SPOUT
TYPE, COMPLETELY SEALED, MOISTURE AND WATER PROOF.
ADMIXTURE, CEMENT: ADDITIVE, CEMENT, 1000 KG PER BAG, CALCIUM
CHLORIDE ADMIXTURE CEMENT; FOR WATER SOLUBLE WEIGHTING AGENT FOR
FORMULATING SOLIDS-FREE COMPLETION BRINES AND TO PROVIDE THE DESIRED
WATER PHASE ACTIVITY IN INVERT EMULSION MUDS. ALSO USED AS AN
ACCELERATOR IN OIL WELL CEMENT SLURRIES,TYPE 1,77-78% CALCIUM
CHLORIDE (CACL2), FLAKES OR PELLETS,1000 KG OR 2200 LBS BAG,ASTM D9868,LIFTING STRAP, BAG IS DISPOSABLE, TOP CLOSURE WATERTIGHT, STACKABLE
& WITHOUT BOTTOM SPOUT, MINIMUM TENSILE STRENGTH FACTOR 5,
FLEXURAL STRENGTH FOR NORMAL HANDLING & OUTSIDE STORAGE NO
PARTICLES GREATER THAN 2MM IN ANY DIMENSION, MULTI-WALL MOISTUREPROOF POLYETHYLENE LINED BAGS W/LIFTING STRAPS, WITHOUT BOTTOM
SPOUT. DRY, FREE FLOWING FLAKES, GRANULES OR PELLETS.
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000021975
1000022170
1000022533
32
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
89
90
2015
Category
Chemicals
(Drilling Fluids)
Chemicals
(Drilling Fluids)
Material Description
NVIS HI - 50 LB
H2S SCAVENGER, POWDER
Material Long Description
ADMIXTURE DRILLING MUD; POWDER, SOLID FORM,SILICATE,FOR VISCOSIFIER
USED IN MILLING CASING WINDOWS,CALCIUM ALUMINOSILICATE,50 LB SEALED
MULTI-WALL PAPER BAG,GRAY COLOR, SPECIFIC GRAVITY 0.6@ 20 DEG C, PH 11,
INSOLUBLE IN WATER, ODERLESS, SHIPMENT OF PRODUCT SHALL CONFORM TO
SAUDI ARAMCO EXPORT PACKING MANUAL THE ORIGINAL MANUFACTURER ,
PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL,
EXPIRATION DATE IF REQUIRED, STOCK NUMBER AND COUNTRY OF ORIGIN BE
PRINTED ON THE CONTAINER, THE CONSTRUCTION OF THE MULTI-WALLED
PAPER BAG FOLLOWS: (CONTAINER) SHALL BE AS 1ST PLY 50 LB MIN. NATURAL
KRAFT PAPER (INTERIOR PLY) 2ND PLY 50 LB MIN. NATURAL KRAFT PAPER 3RD
PLY SEPARATE INNER BAG LINER , HIGH DENSITY ORIENTED AND CROSSLAMINATED INNER LINER (TUBULAR SHAPE) MADE OF POLYETHYLENE RESIN
MATERIAL WITH A MINIMUM WALL THICKNESS OF 0.1 MM. 4TH PLY 50 LB MIN.
ADMIXTURE DRILLING MUD; POWDER, GRANULAR FORM,ORGANOMETAL,FOR
SCAVENGES HYDROGEN SULFIDE FROM DRILLING FLUIDS,IRON GLUCONATE,25
KG SEALED MULTI-WALL PAPER BAG,SOLID, LIGHT YELLOW GREEN COLOR, BULK
DENSITY 650 - 850 KG/M3 @ 20 DEG C, PH 4.5 (1% AQUEOUS SOLUTION),
SOLUBLE IN WATER, MILD BURNT SUGAR ODOR, SHIPMENT OF PRODUCT SHALL
CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL THE ORIGINAL
MANUFACTURER , PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF
MATERIAL, EXPIRATION DATE IF REQUIRED, STOCK NUMBER AND COUNTRY OF
ORIGIN BE PRINTED ON THE CONTAINER, THE CONSTRUCTION OF THE MULTIWALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS 1ST PLY 75 LB MIN.
NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 75 LB MIN. NATURAL KRAFT
PAPER 3RD PLY SEPARATE INNER BAG LINER, HIGH DENSITY ORIENTED AND
CROSS-LAMINATED INNER LINER (TUBULAR SHAPE) MADE OF POLYETHYLENE
RESIN MATERIAL WITH A MINIMUM WALL THICKNES OF 0.1 MM. 4TH PLY 80 LB
MIN. NATURAL KRAFT PAPER (EXTERIOR PLY).
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000757569
1000757581
33
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
Material Description
91
Chemicals
(Drilling Fluids)
ACID SOLUBLE FIBER
92
Chemicals
(Drillning Fluids)
ALCOHOL AND FATT ACID
DEFOAMER
2015
Material Long Description
ADMIXTURE DRILLING MUD; POWDER, SOLID FORM,SPUN MINERAL FIBER,FOR
CONTROLS SEEPAGE, BRIDIGING, PLUGGING VOIDS, FRACTURES DURING
WORKOVER OPERATIONS,CRYSTALLINE SILICA, QUARTZ AND BLAST FURNACE
SLAG,30 LB SEALED MULTI-WALL PAPER BAG,WHITE TO GRAY COLOR, SPECIFIC
GRAVITY 2.6@ 20 DEG C, PH 7-8, BULK DENSITY 12-26 LBS/GALLON @ 20 DEG C
INSOLUBLE IN WATER, ODERLESS, SHIPMENT OF PRODUCT SHALL CONFORM TO
SAUDI ARAMCO EXPORT PACKING MANUAL THE ORIGINAL MANUFACTURER ,
PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL,
EXPIRATION DATE IF REQUIRED, STOCK NUMBER AND COUNTRY OF ORIGIN BE
PRINTED ON THE CONTAINER, THE CONSTRUCTION OF THE MULTI-WALLED
PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 30 LB MIN. NATURAL
KRAFT PAPER (INTERIOR PLY) 2ND PLY 30 LB MIN. NATURAL KRAFT PAPER 3RD
PLY SEPARATE INNER BAG LINER, HIGH DENSITY ORIENTED AND CROSSLAMINATED INNER LINER (TUBULAR SHAPE) MADE OF POLYETHYLENE RESIN
MATERIAL WITH A MINIMUM WALL THICKNES OF 0.1 MM. 4TH PLY 30 LB MIN.
NATURAL KRAFT PAPER. 5TH PLY 30 LB MIN. NATURAL KRAFT PAPER WET
STRENGTH (EXTERIOR PLY).
ADMIXTURE: DRILLING MUD; ORGANOSILICONE, HIGH MOLECULAR
WEIGHTALCOHOL & MODFD FATTY ACID DERIVATIVESADMIXTURE DRILLING
MUD; LIQUID FORM,CRUDE OIL AQUEOUS SOLUTION &WATER-BASE DRILLING
FLUID,FOR DEFOAMER,CRUDE OIL AQUEOUSSOLUTION & WATER-BASE DRILLING
FLUID,55 GAL DRUM,TO REMOVESURFACE AERATION & FOAM IN FRESHWATER,
SEAWATER & BRINE-BASEDDRILLING, COMPLETION & WORKOVER FLUIDS,
REDUCE FOAMINGTENDENCIES OF FLUIDS PREPEARED BY VIGOROUS MIXING OR
AGITATIONAND VISCOSIFIED WITH POLYMERS SUCH AS XANTHAN GUM, HEC,
STARCH,CMC AND PAC, MUST BE MISCIBLE IN WATER, EFFECTIVE
INREMOVINGDISSOLVED OXYGEN AND FOAM WITH SMALL
CONCENTRATIONS,SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO
EXPORT PACKINGMANUAL, MUST BE MARKED WITH: MANUFACTURER'S NAME &
LOCATION,PRODUCTION DATE, BATCH NO.,PURCHASE ORDER NO. AND SAUDI
ARAMCOSTOCK NO.
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000757582
1000021604
34
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
93
94
2015
Category
Chemicals
(Drilling Fluids)
Chemicals
(Drilling Fluids)
Material Description
Material Long Description
Material Number
9COM/9CAT
SULPHONATE ASPHALT
ADMIXTURE: DRILLING MUD; 25 KG (50 LB) SACK; SHIPMENT OF PRODUCT SHALL
CONFORM TO SAUDI ARAMCO EXPORT ADMIXTURE DRILLING MUD; BLACK, DRY,
FREE FLOWING POWDER OR FLAKES, FREE OF LUMPS FORM,MODIFIED
HYDROCARBON COMPOUND SODIUM ASPHALT SULPHONATE. OTHER
ASSOCIATED ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL AND/OR
ADVERSELY AFFECT FLUID PROPERTIES.,FOR STABILIZES SHALE FORMATIONS
REDUCES TORQUE AND DRAG, INHIBITS THE DISPERSION OF DRILL SOLIDS,
REDUCES FILTRATE, EMULSIFIER COMPATIBLE TO ALL MUD SYSTEMS, AS IT IS
SOLUBLE IN BOTH OIL & WATER. HAS GOOD EMULSIFYING CHARACTERISTICS.
REDUCES THE FREQUENCY OF STUCK PIPE HAS NO ADVERSE EFFECTS ON MUD
PROPERTIES.,A BLEND OF HYDROXYLATED SODIUM ASPHALT SULPHONATE WITH
MINOR AMOUNTS OF ASPHALT PHENALATES, INORGANIC SALTS & OXIDIZED
ASPHALT. EXHIBITS SOME FLUORESCENCE. HOWEVER, THIS PROBLEM IS USUALLY
ELIMINATED THROUGH THE WASHING OF CUTTINGS.
1000021607
ADMIXTURE: DRILLING MUD; 25 KG/SACK; CALCIUM SULFATE (GYPSUM)
ADMIXTURE DRILLING MUD; DRY, FREE FLOWING FINE WHITISH POWDER
FORM,HYDRATED CALCIUM SULFATE,FOR A SOURCE OF CALCIUM IONS TO TREAT
CARBONATE CONTAMINATION IN HIGH PH MUDS, AND TO AVOID HOLE
ENLARGEMENT WHEN ANHYDRITE IS DRILLED,25 KG OR 55 LBS/SACK,SHIPMENT
OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL
HYDRATED CALCIUM SULFATE - MULTI-WALLED PAPER BAGS, CONTAINER PROPERLY LABELED, W/VENDOR'S
NAME, MANUFACTURER'S NAME LOCATION, PRODUCTION DATE AND BATCH
GYPSUM
NO.,SAUDI ARAMCO STOCK NUMBER AND SAUDI ARAMCO P.O. NUMBER NOTE:
THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE
AS FOLLOWS: 1ST PLY 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY
75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY 80 LB MIN. NATURAL KRAFT PAPER
(EXTERIOR BF PLY) THE BAG MUST BE VALVE/SPOUT TYPE COMPLETELY SEALED,
PACKING SPEC CODES 8444-18 APPLIES.
1000021559
Saudi Aramco: Company General Use
35
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
95
Chemicals
(Drilling Fluids )
96
Chemicals
(Drilling Fluids )
2015
Material Description
Material Long Description
ADMIXTURE DRILLING MUD; GRAVEL SOLID FORM,GRAVEL: PARTICLE SIZE 8.0-12
MM,FOR TO BE USED IN PERFORMING SECOND STAGE CEMENTING JOBS ON 95/8, 13-3/8 AND 18-5/8 INCH CASING BY USING THE BRIDGING PLATE,SIZED
LIMESTONE, MARBLE SILICA OR BLENDS, SILICA 90 - 97%, SIO2, TYPICAL SG 2.62,
INSOLUBLE IN WATER,25 KG PER SACK,GRAVEL MADE FROM
LIMESTONE,MARBLE, SILICA, OR ANY ROCKGRAVEL MUST BE PREPARED BY USING
10,000 MICRON AND 8,000 MICRON SIEVES THE GRAVEL RETAINED ON TOP OF
THE 8,000 MICRON SIEVE IS TO BE COLLECTED AND SACKED WHILE THE GRAVEL
GRAVEL PARTICLE 8.0-12 MM
RETAINED ON TOP OF THE 10,000 MICRON SIEVE SHOULD BE DISCARDED
AUTHORIZED SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING
AND TESTING, AS NEEDED.THE CONSTRUCTION OF THE MULTI-WALLED PAPER
BAG(CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 75 LB MIN. NATURAL KRAFT
PAPER (INTERIOR PLY) 2ND PLY 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY 80 LB
MIN. NATURAL KRAFT PAPER (EXTERIOR PLY) THE BAG DOES NOT HAVE AN INNER
POLYETHYLENE LINER. THE BAG MUST BE VALVE/SPOUT TYPE COMPLETELY
SEALED.
ADMIXTURE DRILLING MUD; GRAVEL SOLID FORM,GRAVEL: PARTICLE SIZE 18.0 26.5 MM,FOR TO BE USED IN PERFORMING SECOND STAGE CEMENTING JOBS ON
9-5/8, 13-3/8 AND 18-5/8 INCH CASING BY USING THE BRIDGING PLATE,SIZED
LIMESTONE, MARBLE SILICA OR BLENDS, SILICA 90 - 97%, SIO2, TYPICAL SG 2.62,
INSOLUBLE IN WATER,25 KG PER SACK,GRAVEL MADE FROM
LIMESTONE,MARBLE, SILICA, OR ANY ROCKGRAVEL MUST BE PREPARED BY USING
MUST BE PREPARED BY USING FOUR SIEVES 26.5 MM, 22.4 MM, 20 MM, AND 18
GRAVEL PARTICLE 18.0- 26.5 MM MM. THE GRAVEL RETAINED ON TOP OF THE 22.4 MM,20 MM AND 18 MM
SIEVES SHOULD BE COLLECTED AND SACKED WHILE THE GRAVEL RETAINED ON
TOP OF THE 26.5 MM SIEVE SHOULD BE DISCARDED. AUTHORIZED SAUDI
ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING, AS
NEEDED.THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG(CONTAINER)
SHALL BE AS FOLLOWS: 1ST PLY 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR
PLY) 2ND PLY 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY 80 LB MIN. NATURAL
KRAFT PAPER (EXTERIOR PLY).
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000775550
1000775551
36
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
97
98
2015
Category
Material Description
Material Long Description
Material Number
9COM/9CAT
Chemicals
(Drilling Fluids )
ADMIXTURE DRILLING MUD; WHITE POWDER GRANULES, 5 MICRONS
FORM,CALCIUM CARBONATE,FOR BRIDGING AGENT FOR FLUID LOSS CONTROL,
INCREASE DENSITY OF BRINE, WATER AND OIL BASED MUDS,SIZED CALCIUM
CARBONATE POWDER,50 LB. BAG,SG 2.7, PARTICLES SIZE: 5 MICRONS, SHIPMENT
OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL.
THE ORIGINAL MANUFACTURER, PRODUCT NAME, SIZE OF GRAVEL, BATCH
Calcium Carbonate 5, 5 MICRON NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE IF REQUIRED,
50 LB
STOCK NUMBERS AND COUNTRY OF ORIGIN BE PRINTED ON THE CONTAINER
ITSELF, WHETHER IT IS DRUM, BIG BAGS AND/OR PAPER BAGS. THE
CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS
FOLLOWS: 1ST PLY - 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY). 2ND PLY 75 BLMIN. NATURAL KRAFT PAPER. 3RD PLY - 80 LB MIN. NATURAL KRAFT PAPER
(EXTERIOR PLY) THE BAG DOES NOT HAVE INNER POLYETHYLENE LINER.
1000775558
Chemicals
(Drilling Fluids )
ADMIXTURE DRILLING MUD; WHITE POWDER GRANULES, 25 MICRONS
FORM,CALCIUM CARBONATE,FOR BRIDGING AGENT FOR FLUID LOSS CONTROL,
INCREASE DENSITY OF BRINE, WATER AND OIL BASED MUDS,SIZED CALCIUM
CARBONATE POWDER,50 LB. BAG,SG 2.7, PARTICLES SIZE: 25 MICRONS,
SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING
MANUAL. THE ORIGINAL MANUFACTURER, PRODUCT NAME, SIZE OF GRAVEL,
BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE IF
REQUIRED, STOCK NUMBERS AND COUNTRY OF ORIGIN BE PRINTED ON THE
CONTAINER ITSELF, WHETHER IT IS DRUM, BIG BAGS AND/OR PAPER BAGS. THE
CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS
FOLLOWS: 1ST PLY - 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY). 2ND PLY 75 LBMIN. NATURAL KRAFT PAPER. 3RD PLY - 80 LB MIN. NATURAL KRAFT PAPER
(EXTERIOR PLY) THE BAG DOES NOT HAVE INNER POLYETHYLENE LINER.
1000775559
Calcium Carbonate 25, 25
MICRON - 50 LB
Saudi Aramco: Company General Use
37
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
99
Category
Chemicals
(Drilling Fluids )
100
Chemicals
(Drilling Fluids)
101
Chemicals
(Drillning Fluids)
2015
Material Description
Material Long Description
Material Number
9COM/9CAT
Calcium Carbonate 50, 50
MICRON - 50 LB
ADMIXTURE DRILLING MUD; WHITE POWDER GRANULES, 50 MICRONS
FORM,CALCIUM CARBONATE,FOR BRIDGING AGENT FOR FLUID LOSS CONTROL,
INCREASE DENSITY OF BRINE, WATER AND OIL BASED MUDS,SIZED CALCIUM
CARBONATE POWDER,50 LB. BAG,SG 2.7, PARTICLES SIZE: 50 MICRONS,
SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING
MANUAL. THE ORIGINAL MANUFACTURER, PRODUCT NAME, SIZE OF GRAVEL,
BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE IF
REQUIRED, STOCK NUMBERS AND COUNTRY OF ORIGIN BE PRINTED ON THE
CONTAINER ITSELF, WHETHER IT IS DRUM, BIG BAGS AND/OR PAPER BAGS. THE
CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS
FOLLOWS: 1ST PLY - 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY). 2ND PLY 75 LBMIN. NATURAL KRAFT PAPER. 3RD PLY - 80 LB MIN. NATURAL KRAFT PAPER
(EXTERIOR PLY) THE BAG DOES NOT HAVE INNER POLYETHYLENE LINER. THE BAG
MUST BE VALVE/SPOUT TYPE COMPLETELY SEALED.
1000775560
ADDITIVE; 5 GAL PER PAIL,ADDITIVE: DRILLING MUD LIQU XANTHAN GUM USED
TO BUILD VISCOSITY AND GEL STRENGTH IN WATER BASED DRILLING WORKOVER
AND COMPLLETION FLUIDS. ALSO UNIQUE WITH ITS ABILITY TO FLOW AND MIX
XANTHAN GUM (LIQUID
HOMOGENOUSLY WITHOUT CREATING "LUMP"AND PROVIDES LOW-SOLIDS
SUSPENSION)
CONTENTS IN THE MIXED FLUID 5 GAL/PAIL. APPEARANCE: CREAM LIQUID,
SG@20C (WATER=1): 0.95-1.05 SOLUBILITY IN WATER: MISCIB PH: (1%SOL.IN DIS
WATER, 77.
ADDITIVE, DRILLING FLUID: ADDITIVE, FLUID, HIGH DENSITY WEIGHTING AGENT
2200 LBS (1000 KG) ADDITIVE DRILLING FLUID; DRY, FREE FLOWING POWDER
FORM,FOR FOR INCREASING DRILLING FLUID DENSITIES UP TO 194 PCF (26
LB/GAL),2200 LBS (1000 KG) BAGS,API 13A SECTION 3 (MAY, 1993) OR LATEST
EDITION,ADDITIVE, FLUID, HIGH DENSITY WEIGHING AGENT, HEMATITE (IRON
OXIDE) CONTAINS VERY LITTLE TRACES OF COMMON MATERIALS (SILICON OXIDE,
HEMATITE IRON OXIDE FE2O3 ALUMINUM OXIDE, CALCIUM OXIDE, MAGNESIUM OXIDE). OTHER ASSOCIATED
1000 KG BAG
ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL AND /OR ADVERSELY AFFECT
FLUID PROPERTIES. PHYSICAL AND CHEMICAL REQUIREMENTS: X-RAY: IRON
OXIDE (FE2O3) 95% WT MIN. SP GR 5.05 GM/CC MIN. WATER SOLUBLE ALKALINE
EARTH METALS: CALCIUM 100 MG/KG, MAX PARTICLE SIZE: RESIDUE GREATER
THAN 75 MICRONS 1.5 % WT MAX. RESIDUE GREATER THAN 45 MICRONS 15%
WT MAX. PARTICLES LESS THAN 6 MICRONS 15% WT MAX.
Saudi Aramco: Company General Use
1000815368
1000022425
38
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
Material Description
Material Long Description
102
Chemicals
(Drilling Fluids)
SIZED CACO3 AND POLYMERS
LCM
103
Chemicals
(Drilling Fluids)
Spacer-Tek - SBP-9125
SURFACTANT
104
Chemicals
(Drilling Fluids)
Spacer-Tek - SBP-4620
SURFACTANT
105
Chemicals
(Drilling Fluids)
106
Chemicals
(Drilling Fluids)
2015
ADMIXTURE DRILLING MUD; ADMIXTURE FORM,BLEND OF SIZED CACO3 AND
POLYMERS,FOR REDUCES FLUID INVASION WITHOUT DAMAGING THE
FORMATION BY SEALING GAUGE SCREEN FROM INTERNAL SIDE TO BE EASILY
REMOVED WITH PRODUCTION FLUID FLOW.,BLEND OF SIZED CACO3 AND
POLYMERS,BBL.
AGENT WELL STIMULANT; FOR MIXED WITH OTHER SURFACTANTS TO PROVIDE
OPTIMUM CLEANING OF SYNTHETIC AND OIL-BASED MUD SURFACTANT WITH
LOWER HLB NUMBER FOR LOWER TEMPERATURE CLEANING APPLICATION
SPACER-TEK SYSTEM CONSISTS OF SBP-24 DEFOAMER , SBP-85 GEL-E POLYMER,
SBP-101 SOLVENT, SBP,ETHOXYLATED ALCOHOL BASE,LIQUID
FORM,DRUM,APPEARANCE: LIGHT YELLOWIS CLEAR SOLUTION DENSITY: 0.92 PH:
7-8 PLASH POINT: 255 F.
AGENT WELL STIMULANT; FOR MIXED WITH OTHER SURFACTANTS TO PROVIDE
OPTIMUM CLEANING OF SYNTHETIC AND OIL-BASED MUD OVER A WIDE RANGE
OF TEMPERATURES SPACER-TEK SYSTEM CONSISTS OF SBP-24 DEFOAMER , SBP85 GEL-E POLYMER, SBP-101 SOLVENT, SBP-4620 SURFACTANT, SBP-9125
SURFACTANT SBP,BLEND OF NON-IONIC SURFACTANTS AND LINEAR ALCOHOL COSOLVENT,LIQUID FORM,DRUM,APPEARANCE: LIGHT YELLOWIS CLEAR SOLUTION
DENSITY: 1.002 PH: 7-8 PLASH POINT: > 200 F.
AGENT WELL STIMULANT; FOR USED AS THE PRIMARY CLEANING PILL FOR
DISPLACEMENT CLEANUP OF SYNTHETIC AND OIL-BASED DRILLING MUD. THE
SOLVENT PRODUCT IS TYPICALLY MIXED WITH BRINE TO PROVIDE DISPERSED
Spacer-Tek - SBP-101 SOLVENT MACRO DROPLETS OF SOLVENT IN BRINE AND ALSO A HIGHER SOLVENT PILL
DENSITY FOR SUPER,BLENDS OF SURFACTANTS AND SOLVENTS,LIQUID
FORM,DRUM,APPEARANCE: LIGHT YELLOWIS CLEAR SOLUTION DENSITY: 0.850.87 PLASH POINT: 122 F.
AGENT WELL STIMULANT; FOR TO DEVELOP THE VISCOSITY AND GELLING AND TO
BE EASILY HYDRATED EVEN UNDER A LIMITED MIXING CONDITION. ALSO, IT
ENHANCES THE HIGH TEMPERATURE VISCOSITY PERFORMANCE IN SOLID-FREE
Spacer-Tek - SBP-SPACER MIX POLYMER GEL. TYPICAL TREATMENT: 8-25 LB/BBL. SPACER-TEK SYSTEM CONSISTS
OF,PATENTED BLEND OF VISCOSIFIERS AND DISPERSANT,POWDER
FORM,BAG,APPEARANCE: BEIGE-COLORED P S.G.: 1.76.
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000876985
1000877462
1000877461
1000877460
1000877299
39
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
107
Category
Chemicals
(Drilling Fluids)
108
Chemicals
(Drilling Fluids)
109
Chemicals
(Drilling Fluids)
110
111
2015
Chemicals
(Drilling Fluids)
Chemicals
(Drilling Fluids)
Material Description
Material Long Description
Material Number
9COM/9CAT
Spacer-Tek - SBP-600 BIOCIDE
AGENT WELL STIMULANT; FOR TO CONTROL ALL FORMS OF BACTERIA WHICH IS
PARTICULARLY DETRIMENTAL IN FRESH AND BRINE-WATER DRILLING AND
PACKER FLUIDS TYPICAL TREATMENT: 5 GAL/100 BBL. SPACER-TEK SYSTEM
CONSISTS OF SBP-24 DEFOAMER , SBP-85 GEL-E POLYMER, SBP-101 SOLVENT, SBP
4620,BLENDED ORGANIC SULFUR ANTIMICROBIAL AGENT,POWDER
FORM,PAIL,APPEARANCE: WHITE CRYSTAL SPECIFIC GRAVITY: 0.96.
1000877298
AGENT WELL STIMULANT; FOR NON-DAMAGING VISCOSIFIER THAT READILY
DISPERSIBLE IN ALL BRINE SYSTEMS AND EASIER TO USE THAN DRY VISCOSIFIERS .
IT IS SOLUBLE IN HYDROCHLORIC, ACETIC AND FORMIC ACIDS AND DEGRADABLE
Spacer-Tek - SBP-85 GEL-E
AT TEMPERATURES ABOVE 275°F,BLEND OF XANTHAN GUM/ORGANIC
SOLVENT,LIQUID FORM,PAIL,APPEARANCE: BEIGE COLORED SPECIFIC GRAVITY:
1.07 PH: 7 FLASH POINT: 160 F.
AGENT WELL STIMULANT; FOR TO CONTROL FOAMING IN SPACER OR CLEANING
FLUID FORMULATIONS TYPICALLY TREATMENT: 100-500 PPM. SPACER-TEK
SYSTEM CONSISTS OF SBP-24 DEFOAMER , SBP-85 GEL-E POLYMER, SBP-101
Spacer-Tek - SBP-24 DEFOAMER SOLVENT SBP-4620 SURFACTANT, SBP-9125 SURFACTANT, SBP-9755 SURFACTANT
SBP-600,SILICONE EMULSION BASE,LIQUID FORM,PAIL,APPEARANCE: WHITE
CREAMY SPECIFIC GRAVITY: 0.99 PH: 7-8.
Spacer-Tek - SBP-9755
SURFACTANT
AGENT WELL STIMULANT; FOR MIXED WITH OTHER SURFACTANTS TO PROVIDE
OPTIMUM CLEANING OF SYNTHETIC AND OIL-BASED MUD OVER A WIDE RANGE
OF TEMPERATURES. SPACER-TEK SYSTEM CONSISTS OF SBP-24 DEFOAMER ,SBP85 GEL-E POLYMER, SBP-101 SOLVENT, SBP-4620 SURFACTANT, SBP-9125
SURFACTANTS,ALKYL POLYGLUCOSIDE BASE,LIQUID FORM,DRUM,APPEARANCE:
LIGHT YELLOWIS CLEAR SOLUTION DENSITY: 1.1 PH: 7-8 PLASH POINT: 212 F.
ADDITIVE DRILLING FLUID; POWDER FORM,BLEND OF MODIFIED POLYMERS,FOR
PROVIDES CENTRAL TO THE ULTRA-LOW INVASIVE FLUID AND GREATLY REDUCES
MODIFIED POLYMER FOR FLUID FLUID INVASION INTO MATRIX. TYPICAL TREATMENT: 3- 8 LB/BBL.,BLEND OF
LOSS
MODIFIED POLYMERS,25 POUND MULTI-WALLED SACKS,APPEARANCE: POWDER
TO FLAKE. SPECIFIC GRAVITY: 1.0.
Saudi Aramco: Company General Use
1000877297
1000877296
1000877463
1000883084
40
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
112
Chemicals
(Drilling Fluids)
113
Chemicals
(Drilling Fluids)
114
Chemicals
(Drilling Fluids)
115
Chemicals
(Drilling Fluids)
116
Chemicals
(Drilling Fluids)
117
Chemicals
(Drilling Fluids)
2015
Material Description
Material Long Description
ADDITIVE DRILLING FLUID; LIQUID FORM,MIXTURE OF FATTY ACIDS AND
SPECIALTIES,FOR DRILLING LUBE IS USED TO HELP IMPROVE LUBRICITY OF OILBASED MUD SYSTEMS, THEREBY HELPING TO REDUCE TORQUE AND DRAG, AND
LUBRICANT OBM
REDUCING RISK OF DIFFERENTIAL STICKING IN DEEP, TORTUOUS, HIGH ANGLE OR
EXTENDED REACH WELLS,MIXTURE,55-GALLON (208 LITRE) DRUM,APPEARANCE:
AMBER LIQUID. POUR.
ADDITIVE DRILLING FLUID; LIQUID FORM,POLYESTER RESIN BASE,FOR THERMALLY
ACTIVATED LIQUID LOST CIRCULATION MATERIAL THAT MAKES AN
INSTANTANEOUS SEAL ACROSS ANY FRACTURE OR VUGS TO STOP
LOSTCIRCULATION OF DRILLING FLUID AND ALSO SEAL OFF CASING
THERMASET 100-2
LEAKS.,POLYESTER RESIN BASE,IBC,APPEARANCE: YELLOW LIQUID. DEN,WORKING
TEMPERATURE RANGE IS 212 °F - 302 °F FOR HIGH TEMPERATURE APPLICATIONS.
THERMASET SYSTEM CONSISTS OF THERMASET 100-2 OR 55-4, AEROSOL 200,
NORPOL PEROXIDE 40(CI 40), DIBENZOYL PEROXIDE (CI 65) MICROMAX FILLER
AND GLASS FILLER.
ADDITIVE DRILLING FLUID; LIQUID FORM,POLYESTER RESIN BASE,FOR THERMALLY
ACTIVATED LIQUID LOST CIRCULATION MATERIAL THAT MAKES AN
INSTANTANEOUS SEAL ACROSS ANY FRACTURE OR VUGS TO STOP LOST
CIRCULATION OF DRILLING FLUID AND ALSO SEAL OFF CASING LEAKS.,POLYESTER
THERMASET 55-4
RESIN BASE,IBC,APPEARANCE: YELLOW LIQUID. DEN,WORKING TEMPERATURE
RANGE IS 140 °F - 275 °F FOR LOW TEMPERATURE APPLICATIONS. THERMASET
SYSTEM CONSISTS OF THERMASET 100-2 OR 55-4, AEROSOL 200, NORPOL
PEROXIDE 40(CI 40), DIBENZOYL PEROXIDE (CI 65) MICROMAX FILLER AND GLASS
FILLER.
ADDITIVE DRILLING FLUID; SOLID (PULVERIZED POWDER) FORM,GLASS
BEADS,FOR IT IS CHEMICALLY INERT WEIGHTING MATERIAL FOR LOW DENSITY
THERMASET Glass Filler
FLUIDS. IT IS USED IN THERMASET LCM SYSTEM. IT IS STABLE AT TEMPERATURES
UP TO 1112 °F.,GLASS BEADS,BAG,APPEARANCE: SOLID CLEAR AND ODORLESS.
SG1: 0.
ADDITIVE DRILLING FLUID; SOLID FORM,SILICON DIOXIDE,FOR ESPECIAL
VISCOSIFIER FOR THERMASET LCM SYSTEM. IT CAN BE USED IN TEMPERATURE
THERMASET Aerosol/orisil 200
RANGE OF 32 °F - 1112 °F.,SILICON DIOXIDE,BAG,APPEARANCE: SOLID ODORLESS.
SG: 2.2.
ADDITIVE DRILLING FLUID; LIQUID FORM,TERT-BUTYL PERBENZOATE,FOR CURING
AGENT (ACCELERATOR) FOR THERMASET LCM SYSTEM FOR HIGH TEMPERATURE
THERMASET CI-40
APPLICATIONS (205 °F - 266 °F),TERTIARY-BUTYL
PEROXYBENZOATE,CAN,APPEARANCE: LIQUID. DENSITY: 1.
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000885304
1000888051
1000888052
1000888050
1000888053
1000888054
41
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
118
Category
Chemicals
(Drilling Fluids)
Material Description
THERMASET CI-65
119
Chemicals
(Drilling Fluids)
THERMASET CLEANER
120
Chemicals
(Drilling Fluids)
DI-TROL
121
2015
Chemicals
(Drilling Fluids)
DI-BALANCE
Material Long Description
ADDITIVE DRILLING FLUID; LIQUID DISPERSION FORM,DIBENZOYL PEROXIDE,FOR
CURING AGENT (ACCELERATOR) FOR THERMASET LCM SYSTEM FOR LOW
TEMPERATURE APPLICATIONS (32 °F – 205 °F),DIBENZOYL PEROXIDE/ C 9-11
BRANCHED ALKYLBENZOATE,CAN,APPEARANCE: LIQUID. COLOR: WHI.
ADDITIVE DRILLING FLUID; LIQUID FORM,DIMETHYL SUCCINATE, DIMETHYL
GLUTARATE, DIMETHYL ADIPATE,FOR IT IS A CLEANING AGENT USED IN
THERMASET SYSTEM APPLICATIONS TO CLEAN OILY AREAS IN TANKS, PIPES,
ETC.,DIMETHYL SUCCINATE, DIMETHYL GLUTARATE, DIMETHYL
ADIPATE,IBC,APPEARANCE: LIQUID. COLOR: LIG.
ADDITIVE DRILLING FLUID; SOLID FORM,SPECIAL BRANCHED CHAIN MODIFIED
STARCH DERIVATIVE,FOR PROVIDES BOTH VISCOSITY AND FLUID LOSS CONTROL
IN DIVALENT DRILLING FLUID SYSTEM MIXED IN CALCIUM CHLORIDE OR CALCIUM
BROMIDE BRINES IN MI-SWACO DI-PRO SYSTEM.,HIGH MOLECULAR WEIGHT,
BRANCHED-CHAIN STARCH DERIVATIVE,A 25 KG MULTI-WALLED SACK,TYPICAL
PHYSICAL AND CHEMICAL,ORDER UNIT OF MEASURE AND UNIT OF ISSUE SHOULD
BE IN SACKS (1 SACK = 25 KGS). CONTAINER MUST BE PROPERLY LABELED WITH
VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND
BATCH NUMBER. SAUDI ARAMCO WILL CARRY OUT PROPER SAMPLING AND
TESTING AS NEEDED. NOTE: DI-TROL IS NOT COMPATIBLE FOR USE IN MONOVALENT BRINES.#IT WORKS SYNERGISTICALLY WITH OTHER COMPONENTS OF DIPRO SYSTEM MAINLY DI-BALANCE (MM: 1000892842) AND DI-BOOST (MM:
1000892844). IT WORKS SYNERGISTICALLY WITH DI-BALANCE TO ENHANCE THE
LSRV.
ADDITIVE DRILLING FLUID; SOLID FORM,FINE PARTICLE-SIZE MAGNESIUM
COMPOUND,FOR CONTROLS THE PH OF BRINE-BASED AQUEOUS DRILLING FLUID
SYSTEMS MIXED IN ZINC BROMIDE, CALCIUM CHLORIDE OR CALCIUM BROMIDE
IN MI-SWACO'S DI-PRO MUD SYSTEM.,MINIMUM PERCENTAGE AS MGO: 98,A 25
KG MULTI-WALLED SACK,PHYSICAL PROPERTIES: APPEARANC,ORDER UNIT OF
MEASURE AND UNIT OF ISSUE SHOULD BE IN SACKS (1 SACK = 25 KGS).
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000888055
1000888056
1000892845
1000892842
42
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
122
123
124
125
2015
Category
Chemicals
(Drilling Fluids)
Chemicals
(Drilling Fluids)
Chemicals
(Drilling Fluids)
Chemicals
(Drilling Fluids)
Material Description
Material Long Description
Material Number
9COM/9CAT
DI-BOOST
ADDITIVE DRILLING FLUID; LIQUID FORM,DIETHYLENE GLYCOL,FOR A VISCOSITY
ENHANCER AND STABILIZER IN DI-VALENT DRLG FLUID SYSTEMS MIXED IN
CALCIUM CHLORIDE OR CALCIUM BROMIDE BRINES IN MI-SWACO DI-PRO
SYSTEM. IT REDUCES DI-PRO SYSTEM VISCOSITY IF CONCENTRATION EXCEEDS 1.0
% BY VOLUME.,DIETHYLENE GLYCOL: 100% PURITY,7.6 LITERS CAN,PHYSICAL AND
CHEMICAL PROPERTI,ORDER UNIT OF MEASURE AND UNIT OF ISSUE SHOULD BE
IN CANS (1 CAN = 7.6 LITERS). CONTAINER MUST BE PROPERLY LABELED WITH
VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND
BATCH NUMBER. SAUDI ARAMCO WILL CARRY OUT PROPER SAMPLING AND
TESTING AS NEEDED. NOTE: DI-BOOST WORKS SYNERGISTICALLY WITH OTHER
COMPONENTS OF DI-PRO SYSTEM MAINLY DI-BALANCE (MM: 1000892842) AND
DI-TROL (MM: 1000892845).
1000892844
LE SPERMUL - OBM emulsion
control
ADDITIVE DRILLING FLUID; LIQUID FORM,EMULSIFIER FOR INVERT EMULSION
MUD,FOR THIS IS PART OF HIGH PERFORMANCE CLAY-FREE OBM SYSTEM. A
LIQUID PRIMARY EMULSIFIER AND OIL-WETTING AGENT FOR USE IN MINERAL OILOR DIESEL OIL OR SYNTHETIC OIL-BASED DRILLING FLUID SYSTEMS OF INNOVERT,
INTEGRADE OR ENCORE DRILLING FROM HALLIBURTON BAROID.,A PROPRIETARY
EMULSIFIER MIXTURE,DRUM,APPEARANCE: CLEAR AMBER VISCOU,REQUIRED
QTY: 55 GAL PER DRUM.
1000904194
FACTANT - OBM emulsifer
ADDITIVE DRILLING FLUID; LIQUID FORM,EMULSIFIER AND WETTING AGENT FOR
INVERT EMULSION MUD,FOR THIS IS PART OF HIGH PERFORMANCE CLAY-FREE
OBM SYSTEM. A LIQUID EMULSIFIER AND OIL-WETTING AGENT FOR USE IN
MINERAL OIL- OR DIESEL OIL OR SYNTHETIC OIL-BASED DRILLING FLUID SYSTEMS
OF INNOVERT, INTEGRADE OR ENCORE DRILLING FROM HALLIBURTON BAROID.,A
PROPRIETARY EMULSIFIER MIXTURE,DRUM,APPEARANCE: DARK VISCOUS
LIQUI,REQUIRED QTY: 55 GAL PER DRUM.
1000904195
ADDITIVE DRILLING FLUID; SOLID FORM,CROSS-LINKED POLYMER SOLID,FOR THIS
IS PART OF HIGH PERFORMANCE CLAY-FREE OBM SYSTEM. A CROSS-LINKED
POLYMER SOLID THAT PROVIDES FILTRATION CONTROL FOR USE IN MINERAL OILBHD-513 - OBM filtrate control OR DIESEL OIL OR SYNTHETIC OIL-BASED DRILLING FLUID SYSTEMS OF INNOVERT,
INTEGRADE OR ENCORE OF HALLIBURTON BARO,A CROSS-LINK POLYMER
SOLID,BAG,APPEARANCE: SOLID. SPECIFIC GR,REQUIRED QTY: 25 KG PER BAG.
1000904196
Saudi Aramco: Company General Use
43
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
126
Category
Chemicals
(Drilling Fluids)
Material Description
Material Long Description
Material Number
9COM/9CAT
BDF-489 - OBM viscofifier
ADDITIVE DRILLING FLUID; SOLID FORM,ORGANIC BASED VISCOSIFER,FOR THIS IS
PART OF HIGH PERFORMANCE CLAY-FREE OBM SYSTEM. AN ORGANIC BASED
RHEOLOGY MODIFIER FOR USE IN MINERAL OIL- OR DIESEL OIL OR SYNTHETIC OILBASED DRILLING FLUID SYSTEMS OF INNOVERT, INTEGRADE OR ENCORE OF
HALLIBURTON BAROID.,ORGANIC BASED VISCOSIFIER,25 KG BAG,APPEARANCE:
SOLID WHITE. MELTING POINT: 55,REQUIRED QTY: 25 KG PER BAG.
1000904197
127
Chemicals
(Drilling Fluids)
ADAPTA - OBM filtrate control
128
Chemicals
(Drilling Fluids)
RHEOMOD-L- OBM viscosifer
129
Chemicals
(Drilling Fluids)
TAU-MUD - OBM viscofifier
130
2015
Chemicals
(Drilling Fluids)
RHEOLOGY MODIFIER OMNIPLEX
ADDITIVE DRILLING FLUID; SOLID FORM,METHYLSTYRENE ACRYLATE
COPOLYMER,FOR THIS IS PART OF HIGH PERFORMANCE CLAY-FREE OBM SYSTEM.
PRIMARY FILTRATION CONTROL AGENT FOR USE IN MINERAL OIL- OR DIESEL OIL
OR SYNTHETIC OIL-BASED DRILLING FLUID SYSTEMS OF INNOVERT, INTEGRADE
OR ENCORE OF HALLIBURTON BAROID.,METHYLSTYRENE ACRYLATE
COPOLYMER,25 KG BAG,APPEARANCE: SOLID WHITE. SPECIFIC GRAVITY
:,REQUIRED QTY: 25 KG PER BAG.
ADDITIVE DRILLING FLUID; LIQUID FORM,MODIFIED TRIMER FATTY ACID,FOR THIS
IS PART OF HIGH PERFORMANCE CLAY-FREE OBM SYSTEM. LIQUID POLYMERIC
VISCOSIFIER AGENT FOR USE IN MINERAL OIL- OR DIESEL OIL OR SYNTHETIC OILBASED DRILLING FLUID SYSTEMS OF INNOVERT, INTEGRADE OR ENCORE OF
HALLIBURTON BAROID.,MODIFIED TRIMER FATTY ACID,55 GAL
DRUM,APPEARANCE: LIQUID DARK. SPECIFIC GRAVITY : 0,REQUIRED QTY: 55 GAL
PER DRUM.
ADDITIVE DRILLING FLUID; POWDER FORM,CYRISTALLINE SILICA AND
SEPIOLITE,FOR A HIGH TEMPERATURE VISCOSIFER, ONE OF THE COMPONENT OF
CLAY FREE OIL-BASED DRILLING FLUID SYSTEMS OF HALLIBURTON # BAROID
INNOVERT (LOW TOXICITY MINERAL OIL BASE) AND INTEGRADE (DIESEL BASE).
ADDITIVE DRILLING FLUID; LIQUID FORM,ANIONIC SYNTHETIC POLYMER IN
EMULSION FORM,FOR A LIQUID POLYMERIC PREMIER VISCOSIFIER WHICH HELPS
TO IMPROVE THE RHEOLOGICAL AND SUSPENSION CHARACTERISTIC OF LOW
TOXICITY MINERAL OIL- AND SYNTHETIC OIL-BASED DRILLING FLUIDS OR IN
DIESEL OIL-BASED MUD. IT HELPS INCREASE PRIMARILY LOW SHEAR
RHEOLOGICAL,ANIONIC SYNTHETIC POLYMER IN EMULSION
FORM,DRUM,PHYSICAL PROPERTIES: APPEAR BOILING POINT: ~ 100 OC
MELT/FREEZE POINT: -12 OC PH VALUE CONC. SOLN: 2 # 5 FLASH
PO,PARAMETERS VALUE #FANN-35 F1 SPRING 6 RPM READING @ 120 OF EQUAL
OR GREATER THAN 9 #FANN-35 F1 SPRING 3 RPM READING @ 120 OF EQUAL OR
GREATER THAN 8#LOW SHEAR YIELD POINT LSYP @120 OF EQUAL OR GREATER
THAN 7#.
Saudi Aramco: Company General Use
1000904198
1000904199
1000908546
1000904472
44
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
131
132
Category
Chemicals
(Drilling Fluids)
Chemicals
(Drilling Fluids)
133
Chemicals
(Drilling Fluids)
134
Chemicals
(Drilling Fluids)
2015
Material Description
Material Long Description
Material Number
9COM/9CAT
OIL SOLUBLE H2S SCAVENGER
ADDITIVE DRILLING FLUID; LIQUID FORM,HYDROCARBON,FOR OIL SOLUBLE
HYDROGEN SULFIDE SEQUESTERING AGENT/SCAVENGER AQUEOUS SOLUTION
MIXTURE OF INORGANIC COMPOUNDS, FOR THE REMOVAL OF H2S IN VARIOUS
APPLICATIONS AND NOT LIMITED TO ZERO FLARING/FLOWBACK, CRUDE OIL
ROAD TRANSPORTATION, DRILLING MUD, REFINING AND P,PROPRIETARY BLEND
OF ZINC COMPOUNDS IN HYDROCARBON BASE,DRUM,APPEARANCE/ODOR:
VISCOUS YELLOW TO YELLOW-GREEN LIQUID /MILD ODOR. BOILING POINT: 180
DEG CELSIUS. VAPOR PRESSURE: 0.50 MMHG. SOLUBILITY IN WATER: INSOLUBLE.
SPECIFIC GRAVITY: 0.9 (WATER = 1.0). MOLECULAR WEIGHT: PROPRIETARY. PH: 67. FLASH POINT (METHOD): >200F. FOR THE REMOVAL OF H2S IN VARIOUS
APPLICATIONS AND NOT LIMITED TO ZERO FLARING/FLOWBACK, CRUDE OIL
ROAD TRANSPORTATION, DRILLING MUD, REFINING AND PETROCHEMICAL
PLANTS, CRUDE OIL SHIPMENTS AND DISPOSAL WELLS.
1000843350
HTHP FLUID LOSS SYNTHETIC
POLYMER
ADDITIVE DRILLING FLUID; WHITE POWDER FORM,SYNTHETIC POLYMER,FOR
CONTROLS HTHP FLUID LOSS IN FRESH, SALTY, OR HARD BRINE FLUIDS. IT
INHIBITS SHALE AND STABILIZING FLUID RHEOLOGY. IT CONTROLS WATER LOSS
IN ALL ENVIRONMENTS AND REDUCES DIFFERENTIAL STICKING TENDENCIES.,25
LB MULITIWALL PAPER BAG,APPEARANCE : WHITE COLOURED PO.
1000847072
ADDITIVE DRILLING FLUID; POWDER FORM,SPECIAL BLEND OF GRADED SEALING
PARTICLES.,FOR DESIGNED TO BE EFFECTIVE IN CURING SEVERE TO TOTAL LOSS
CIRCULATION IN HIGHLY FRACTURED/VUGULAR OR POROUS CARBONATE
FORMATIONS, WITHOUT THE ADDITION OF OTHER CONVENTIONAL LCMS IT CAN
SEALING PARTICLES LCM
BE USED IN ALL TYPES OF DRILLING FLUIDS AND IT IS NOT
RECOMMENDED,SPECIAL BLEND OF GRADED SEALING
PARTICLES.,BAG,APPEARANCE: LIGHT TAN/BROWN SPECIFIC GRAVITY: 0.9
SOLUBILITY IN WATER: INSOLU PH: 6.5-7.5.
ADDITIVE DRILLING FLUID; POWDER FORM,MIXTURE,FOR HIGH FLUID LOSS LCM
HIGH SOLIDS HIGH FLUID LOSS FORMS A RAPID SOLID PLUG AGAINST LOSS ZONE WHEN LIQUID PHASE IS
SQUEEZE FROM SLURRY IN ORDER TO CURE PARTIAL TO SEVERE LOSSES OF
LCM
WATER/OIL BASED MUDS.,MIXTURE,BAG,APPEARANCE: OFF-WHITE TO GA BULK
DENSITY: 41-46 LB/CU PH: 11.5-12.8.
Saudi Aramco: Company General Use
1000866812
1000881942
45
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
135
136
137
138
2015
Category
Chemicals
(Drilling Fluids)
Chemicals
(Drilling Fluids)
Chemicals
(Drilling Fluids)
Chemicals
(Drilling Fluids)
Material Description
Material Long Description
Material Number
9COM/9CAT
SWELLING SEALING LCM
ADDITIVE DRILLING FLUID; POWDER FORM,MIXTURE OF POLYSACCHARIDES,FOR
SWELLING/SEALING AGENT USED TO FILL FRACTURES AND VOIDS BY CREATING A
SOLID INNER MATRIX SEAL IN ORDER TO CURE PARTIAL TO SEVERE LOSSES OF
WATER/OIL BASED MUDS. USUALLY PUMPED AHEAD OF EZ-SQUEEZE OR CEMENT
JOB AND IT HAS A GOOD SOLUBILITY IN ACID,MIXTURE OF
POLYSACCHARIDES,PAIL,APPEARANCE: LIGHT TAN TO OF BULK DENSITY: 35-55
BA/CU.
1000881943
DRILZONE - ROP enhancer
ADDITIVE DRILLING FLUID; LIQUID FORM,IVE ND OF SURFACE,FOR SPECIAL BLEND
OF SURFACE AGENTS ROP ENHANCER ,USED IVE IN THE WATER BASE MUD FOR
REDUCING TORQUE AND ,DRAG AND PREVENTING BIT BALLING. NORMAL
TREATMENT:1-2% VOL/VOL. KLA-SHIELD SYSTEM CONSISTS OF DRILZONE IDCAP
D, KLA-STOP AND POROSEAL.,IVE ND OF SURFACE,55 GAL/ DRUM,APPEARANCE:
YELLOW TO BROWN 0.78- FLASH POINT: > 201°F UID SPECIFIC GRAVITY.
1000875822
KLA-STOP
ADDITIVE DRILLING FLUID; LIQUID FORM,POLYAMINE DERIVATIVE,FOR USED FOR
SUPPRESSING CLAY SWELLING. IT EFFECTIVELY , INHIBITS SHALE OR GUMBO
CLAYS FROM HYDRATING , AND MINIMIZES THE POTENTIAL FOR BIT BALLING.
NORMAL TREATMENT: 1-4% VOL/VOL. KLA-SHIELD SYSTEM CONSISTS OF
DRILZONE , IDCAP D, KLA-STOP AND POROSEAL,POLYAMINE DERIVATIVE,DRUM
55 GAL/ DRUM,PH (5% SOLUTION): 9.2-10. FLASH POINT: > 200°F
EARANCE:COLORLESS LIQUID CIFIC GRAVITY: 1.03-1.0.
1000875823
ADDITIVE DRILLING FLUID; POWDER FORM,DRY ACRYLIC ACID COPOLYMER,FOR
ENCAPSULATION COPOLYMER USED TO PROVIDE CUTTINGS , ENCAPSULATION
AND CLAY DISPERSION INHIBITION WITH MINIMAL VISCOSITY CONTRIBUTION
FOR WATER BASE FLUIDS AND SALINE WATER ENVIRONMENTS. NORMAL
TREATMENT: 2-4 LB/BBL. KLA-SHIELD SYSTEM CONSISTS OF DRILZONE,DRY
ACRYLIC ACID COPOLYMER,BAG 25 KG/SACK,APPEARANCE: WHITE POWDER
SPECIFIC GRAVITY: 0.8 PH (1% SOLUTION): 6.
1000875824
IDCAP D
Saudi Aramco: Company General Use
46
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
139
140
2015
Category
Chemicals
(Drilling Fluids)
Chemicals
(Drilling Fluids)
Material Description
POROSEAL
FIBER FINE
Material Long Description
ADDITIVE DRILLING FLUID; LIQUID FORM,STARCH COPOLYMER,FOR PROVIDES
PERMEABILITY PLUGGING TO EFFECTIVELY SEAL SHALES AND FILTER CAKES,
IMPROVING THE PERFORMANCE OF HIGHLY INHIBITIVE WATER-BASE DRILLING
FLUIDS. IT ADDITIVE IS ALSO USED TO PROVIDE SUPPLEMENTAL FLUID LOSS
CONTROL IN HIGH-TEMPERATURE APPLICATIONS NORMAL POROSEAL -SHIELD
SYSTEM CONSISTS DRILZONE IDCAP D, KLA-STOP ATMENT:2-5%
VOL/VOL.,STARCH COPOLYMER,55 GAL/DRUM,APPEARANCE: WHITE LIQUID
SPECIFIC GRAVITY: 1.0-1.1 PH (CONC. SOLUTION): 10.
ADMIXTURE DRILLING MUD; SOLID FORM,ORGANIC CELLULOSE FIBER, LIGHT TAN
/ BROWN,FOR USED FOR SEALING THIEF ZONES, HIGHLY FRACTURED/VUGULAR
FORMATIONS AND MINIZING THE RISK OF DIFFERENTIAL STICKING,A FINELY SIZED
(MICRONIZED) ORGANIC CELLULOSE FIBER,25LB.BAG,ODORLESS, SG: 0.9, MIX OF
FINELY DIVIDED CELLULOSE FIBERS, INSOLUBLE IN WATER, NON TOXIC, PH: 6.57.5,SIEVE SPECIFICATION FOR FRAC-SEAL FINE: RETAIN ON 40 MESH SIEVE: 0%,
RETAIN ON 60 MESH SIEVE: 0.10%, RETAIN ON 80 MESH SIEVE: 0.20%, RETAIN ON
100 MESH SIEVE: 2.83%, RETAIN ON 140 MESH SIEVE:11.2%, RETAIN ON 170
MESH SIEVE:28.5%, RETAIN ON 270 MESH SIEVE:38.23%:NORMAL TREATMENT: 810 LB/BBL OF FRACSEAL-FINE , THE CONSTRUCTION OF THE MULTI-WALLED
PAPER BAG (CONTAINER)SHALL BE FOLLOWS: 1ST PLY 75 LB.NATURAL KRAFT
PAPER(INTETIOR PLY) 2ND PLY 75 LB.NATURAL KRAFT PAPER 3RD PLY 80
LB.NATURAL KRAFT PAPER (EXTERIOR PLY). THE BAG DOES NOT HAVE AN INNER
POLYETHYLENE LINER. THE BAG MUST BE VALVE/SPOUT TYPE COMPLETELY
SEALED OTHER ASSOCIATED ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL
AND/OR ADVERSELY AFFECT FLUID PROPERTIES.
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000875825
1000792802
47
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
141
142
2015
Category
Chemicals
(Drilling Fluids)
Chemicals
(Drilling Fluids)
Material Description
Material Long Description
Material Number
9COM/9CAT
FIBER MEDIUM
ADMIXTURE DRILLING MUD; SOLID FORM,ORGANIC CELLULOSE FIBER, LIGHT TAN
/ BROWN,FOR USED FOR SEALING THIEF ZONES, HIGHLY FRACTURED/VUGULAR
FORMATIONS AND MINIZING THE RISK OF DIFFERENTIAL STICKING,A FINELY SIZED
(MICRONIZED) ORGANIC CELLULOSE FIBER,25LB.BAG,ODORLESS, SG: 0.9, MIX OF
FINELY DIVIDED CELLULOSE FIBERS, INSOLUBLE IN WATER, NON TOXIC, PH: 6.57.5,SIEVE SPECIFICATION FOR FRAC-SEAL MEDIUM: RETAIN ON 40 MESH
SIEVE:1.8%, RETAIN ON 60 MESH SIEVE: 0.30%,RETAIN ON 80 MESH SIEVE:1.7%,
RETAIN ON 100 MESH SIEVE: 4.33%, RETAIN ON 140MESH SIEVE:5.40%, RETAIN
ON 170 MESH SIEVE: 15.97%,RETAIN ON 270 MESH SIEVE:31.17%:NORMAL
TREATMENT: 8-10 LB/BBL OF FRACSEAL-MEDIUM , THE CONSTRUCTION OF THE
MULTI-WALLED PAPER BAG (CONTAINER)SHALL BE FOLLOWS: 1ST PLY 75
LB.NATURAL KRAFT PAPER(INTETIOR PLY) 2ND PLY 75 LB.NATURAL KRAFT PAPER
3RD PLY 80 LB.NATURAL KRAFT PAPER (EXTERIOR PLY). THE BAG DOES NOT HAVE
AN INNER POLYETHYLENE LINER.
1000792803
FIBER COARSE, 25 LB
ADMIXTURE DRILLING MUD; SOLID FORM,ORGANIC CELLULOSE FIBER, LIGHT TAN
/ BROWN,FOR USED FOR SEALING THIEF ZONES, HIGHLY FRACTURED/VUGULAR
FORMATIONS AND MINIZING THE RISK OF DIFFERENTIAL STICKING,A FINELY SIZED
(MICRONIZED) ORGANIC CELLULOSE FIBER,25LB.BAG,ODORLESS, SG: 0.9, MIX OF
FINELY DIVIDED CELLULOSE FIBERS, INSOLUBLE IN WATER, NON TOXIC, PH: 6.57.5,SIEVE SPECIFICATION FOR FRAC-SEAL COARSE: RETAIN ON 40 MESH SIEVE:
4.93%, RETAIN ON 60 MESH SIEVE: 2.17%, RETAIN ON 80 MESH SIEVE: 3.73%,
RETAIN ON 100 MESH SIEVE: 6.17%, RETAIN ON 140 MESH SIEVE:6.87%, RETAIN
ON 170 MESH SIEVE:17.63%, RETAIN ON 270 MESH SIEVE:30.47%:NORMAL
TREATMENT: 8-10 LB/BBL OF FRACSEAL-COARSE, THE CONSTRUCTION OF THE
MULTI-WALLED PAPER BAG (CONTAINER)SHALL BE FOLLOWS,1ST PLY 75
LB.NATURAL KRAFT PAPER(INTETIOR PLY)2ND PLY 75 LB.NATURAL KRAFT PAPER
3RD PLY 80 LB.NATURAL KRAFT PAPER (EXTERIOR PLY).THE BAG DOES NOT HAVE
AN INNER POLYETHYLENE LINER.THE BAG MUST BE VALVE/SPOUT TYPE
COMPLETELY SEALED OTHER ASSOCIATED LEMENTS MUST NOT BE HARMFUL TO
PERSONNEL AND/OR ADVERSELY AFFECT FLUID PROPERTIES.
Saudi Aramco: Company General Use
1000792804
48
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
143
144
2015
Category
Chemicals
(Drilling Fluids)
Chemicals
(Drilling Fluids)
Material Description
BARABRINE Defoam
PUREFIED XANTHAN GUM
Material Long Description
ADDITIVE DRILLING FLUID; LIQUID FORM,BLEND OF NONIONIC
SURFACTANTS,FOR NON-DAMAGING FLUIDS RDF-615 AND NON-RESERVOIR
WBM AND BRINES, INCLUDING ZNBR2,BLEND OF NONIONIC SURFACTANTS,PAIL
(ONE PAIL = 5 GALLONS),APPEARANCE: COLORLESS CLEAR LI,ADDITIVE FOR FLUID
FORMULATION FOR SYSTEM RDF-615. THIS DEFOAMER IS USED AS PART OF THE
NON-DAMAGING FLUIDS RDF-615, WHICH INCLUDES BARAZAN D PLUS, BARA
CARB 150, OXYGON, BARABUF (MM: 1000184370), N DRILL HT PLUS (MM:
1000788390), BARACARB 5 (MM: 1000775558), BARACARB 25 (MM:
1000775559), BARACARB 50 (MM:1000775560) AND BAROLUBEGOLD SEAL (MM:
1000757580). TYPICAL TREATMENT IS 0.05-0.25 LB/BBL (0.007-0.033 GAL/BBL).
THIS DEFOAMER CAN ALSO BE USED IN NON-RESERVOIR WATER BASED MUDS
AND BRINES, INCLUDING ZNBR2. SUPPLIER/VENDOR IS REQUIRED TO SUBMIT LAB
CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO).
ADDITIVE DRILLING FLUID; POWDER FORM,VISCOSIFIER / SUSPENSION AGENT
(POLYSACCHARIDE),FOR FRESH WATER, SEA WATER AND BRINE,DISPERSANTADDED BIOPOLYMER (XANTHAN GUM),BAG (ONE BAG =55 LBS),APPEARANCE:
YELLOW TO WHITE PO,ADDITIVE FOR FLUIDFORMULATION FOR SYSTEM RDF-615.
IT IS A BIOPOLYMER XANTHAN GUM USED TO HELP TO DISPERSE EASILY, AND TO
PROVIDE VISCOSITY AND SUSPENSION IN FRESH WATER, SEA WATER AND IN
BRINES, AS SODIUM AND POTASSIUM BROMIDES AND SODIUM AND POTASSIUM
CHLORIDES. IT IS STABLE AT 250 DEG F (121 DEG C). TYPICAL TREATMENT OF 0.12 LB/BBL (0.3-5.7 KG/ CUBIC M) AS NEEDED TO OBTAIN THE DESIRED VISCOSITY.
THE UNIT IS 55 LBS (25 KG)/BAG. IT IS PART OF A NON-DAMAGING SYSTEM RDF615, WHICH CONTAINS BARABRINE DEFOAM, BARA CARB 150, OXYGON,
BARABUF (MM: 1000184370), N DRILL HT PLUS (MM: 1000788390), BARACARB 5
(MM: 1000775558), BARACARB 25 (MM:1000775559), BARACARB 50 (MM:
1000775560) AND BAROLUBE GOLD SEAL (MM: 1000757580).
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000908534
1000908458
49
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
Material Description
Material Long Description
Material Number
9COM/9CAT
Chemicals
(Drilling Fluids)
ADDITIVE DRILLING FLUID; POWDER OR GRANULES FORM,SIZED CALCIUM
CARBONATE (CACO3) MARBLE QUALITY,FOR WATER BASED MUD (WBM), OIL
BASED MUD (OBM) AND BRINE,CALCIUM CARBONATE (CACO3) MARBLE
QUALITY.,BAG (ONE BAG = 55 LBS),APPEARANCE: WHITE POWDER OR
GR,ADDITIVE FOR FLUID FORMULATION FOR SYSTEM RDF-615. SIZED MARBLE
CALCIUM CARBONATE (D50 = 150 MICRONS) USED TO INCREASE DENSITY IN
Ground Marble CaCO3, 50-150,
WBM AND OBM FOR RESERVOIR APPLICATIONS AND BRINES AND AS A BRIDGING
55 LB
AGENT FOR FLUID LOSS CONTROL AND SEALING/LCM IN NON - DAMAGING
SYSTEMS. THE UNIT IS 55 LBS (25 KG) / BAG. IT IS PART OF THE RDF -615 WHICH
CONTAINS BARABRINE DEFOAM, BARAZAN D PLUS, OXYGON, BARABUF (MM:
1000184370), N DRILL HT PLUS (MM:1000788390), BARACARB5 (MM:
1000775558), BARACARB 25 (MM:1000775559), BARACARB 50 (MM:
1000775560) AND BAROLUBE GOLD SEAL (MM: 1000757580).
1000908535
146
Chemicals
(Drilling Fluids)
Oxygon
ADDITIVE DRILLING FLUID; POWDER FORM,ORGANIC ACID SALT (OXYGEN
SCAVENGER),FOR FRESH WATER, WATER BASED MUD (WBM) AND MONO OR
DIVALENT BRINES,GRANULAR ERYTHORBATE MATERIAL,PAIL (ONE PAIL =55
LBS),APPEARANCE: WHITE GRANULAR POW,ADDITIVE FOR FLUID FORMULATION
FOR SYSTEM RDF-615. IT IS USED AS A CORROSION INHIBITOR OR OXYGEN
SCAVENGER IN WBM, WATER AND IN MONO OR DIVALENT BRINES/COMPLETION
FLUIDS. THE UNIT IS 55 LBS (25KG)/PAIL. IT IS PART OF THE NON-DAMAGING
SYSTEM - RDF -615 SYSTEM WHICH CONTAINS BARABRINE DEFOAM, BARAZAN D
PLUS, BARA CARB 150, BARABUF (MM: 1000184370), N DRILL HT PLUS
(MM:1000788390), BARACARB 5 (MM: 1000775558), BARACARB 25
(MM:1000775559), BARACARB 50 (MM: 1000775560) AND BAROLUBE GOLD SEAL
(MM: 1000757580). TYPICAL TREATMENT OF 0.1 LB/BBL. BASE THE TREATMENT
OF CIRCULATING FLUIDS ON OXYGEN CONTENT.
1000908459
147
Chemicals
(Drilling Fluids)
MAGNESIUM OXIDE
CHEMICAL; GR TECHNICAL,M20,POWDER FORM,22.7 KG (50 LB) - 25.0 KG (55 LB)
SACK,96% MG0 MIN,MAGNESIUM OXIDE,SHIPMENT OF PRODUCT SHALL
CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL THE PRODUCT
SHOULD BE PACKED IN 3 OR 4 PLY PAPER SACKS
1000184370
145
2015
Saudi Aramco: Company General Use
50
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
148
149
2015
Category
Chemicals
(Drilling Fluids)
Chemicals
(Drilling Fluids)
Material Description
Material Long Description
ADDITIVE DRILLING FLUID; SPECIAL BLEND,FOR 5 MAX C DEG (320 F) MAX AND
PH USED TO REDUCE TORQUE AND DRAG IN VERY CHALLENGING DRILLING AND
COMPLETION OPERATIONS E.G. SPECIAL COILED TUBING UNDER BALANCED
DRILLING. THE PRODUCT SHOULD BE COMPATIBLE FOR APPLICATION IN
SEAWATER AND SALT BRINE-BASED DRILLING FLUIDS AND BRINES. IENT
LUBRICANT - RADIAGREEN EME CONDITIONS TOM HOLE LIMITATIONS: NHOLE CONDITIONS OR ING
SALT
APPLICATIONS UNDER ASING IN DRUM OR CHEESING E PHASE SEPARATION
PROBLEMS ALKALINE DRILLING FLUIDS PRODUCT SHOULD BE EASY PRODUCT
SHOULD NOT FORM HANDLE, EASY TO FLOW AT,SPECIAL
BLEND,DRUM,APPEARANCE: AMBER LIQUID SPECIFIC GRAVITY: 0.98-1.1
SOLUBILITY IN WATER: INSOLU FLASH POINT (METHOD): 185 POUR POINT: 32 C
DEG
MAX. DRILLING MUD; AA SOLID, GRANULAR, WHITE TO FORM,MIL-PAC LV,
ADMIXTURE
POLYANIONIC ODORLESS, POLYANIONIC,FOR AA USED FOR FILTRATION
CONTROL,AA POLYANIONIC CELLULOSE,50 LB OR 25 KG / SACK,AA APPEARANCE:
SOLID, CREAM,OTHER ASSOCIATED ELEMENTS BULID-UP. CONTAINER IS A MULTIWALLED SACK, 1ST PLY - 70 G/SQM NATURAL KRAFT PAPER (INTERIOR PLY). 2ND
PLY - 70 G/SQM NATURAL KRAFT PAPER. 3RD PLY - SEPARATE INNER BAG LINER,
POLYANIONIC CELLULOSE LO-VIS HIGH DENSITY ORIENTED AND CROSS LAMINATED INNER LINER (TUBULAR SHAPE)
MADE UP OF POLYETHYLENE RESIN MATERIAL WITH A WEIGHT RANGE OF 15-24
(PAC-LV)
G/SQM. 4TH PLY - 70 G/SQM NATURAL KRAFT PAPER. 5TH PLY - SEPARATE INNER
BAG LINER, HIGH LAMINATED INNER LINER (TUBULAR SHAPE)MADE UP OF
POLYETHYLENE RESIN MATERIAL MATERIAL WITH A WEIGHT RANGE OF 15-24
G/SQM. 6TH PLY - 70 G/SQM NATURAL KRAFT PAPER (EXTERIOR PLY). THE BAG
MUST BE PROPERLY CONTAINER BE VALVE / SPOUT TYPE COMPLETELY SEALED
AND MOISTURE PROOF.
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000857139
1000758662
51
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
150
Category
Chemicals
(Drilling Fluids)
Material Description
CALCIUM CHLORIDE (94-98%)
2200 lb/BAG
151
Chemicals
(Drilling Fluids)
RHEOLOGY MODIFIER
152
Chemicals
(Drilling Fluids)
H2S SCAVENGER, LIQUID
2015
Material Long Description
ADDITIVE: CEMENT; 2200 LB BAG; NON-BREATHABLE FABRIC; DISPOSABLE BAG;
WITH LIFTING STRAPS; NO ADMIXTURE CEMENT; FOR USED FOR BUILDING OIL
WELL COMPLETION FLUIDS,TYPE 1,94-98% CALCIUM CHLORIDE (CACL2) POWDER,
FLAKES OR PELLETS,2200 LB BAG,ASTM D98,PURITY AS FOLLOW: A. CALCIUM
CHLORIDE (CACL2): 98% WT. B. MAGNESIUM AS MGCL2: 0.2 - 0.4 % WT. C. ALKALI
CHLORIDES AS NACL: 1.4 - 5.0 % WT. D. HEAVY METALS AS PB: 0.005 % WT
MAXIMUM. E. SULFATE AS CASO4: 0.05 % WT MAXIMUM. F. WATER INSOLUBLES:
0.20 % WT MAXIMUM. G. OTHER WATER SOLUBLE IMPURITIES: 0.35 % WT
MAXIMUM. H. PH: 10 % (V/V) SOLUTION (5.89 G IN 97.3 CC DEIONIZED WATER):
7.5 TO 9.5. REQUIRES SAUDI ARAMCO HAZCOM LABEL IN MM # 1000644273.
LIFTING STRAP BAG IS DISPOSABLE, TOP CLOSURE WATERTIGHT, STACKABLE &
WITHOUT BOTTOM SPOUT, MINIMUM TENSILE STRENGTH FACTOR 5, FLEXURAL
STRENGTH FOR NORMAL HANDLING & OUTSIDE STORAGE NON-BREATHABLE
FABRIC, STACKABLE WITHOUT USE OF PALLET, BAG TOP CLOSURE TO BE WATER
TIGHT & CAPABLE OF WITHSTANDING THE SAME HANDLING & STORAGE
REQUIREMENTS AS THE BAG ITSELF REQUIRES SAUDI ARAMCO HAZCOM LABEL IN
MM 1000644274.
ADMIXTURE DRILLING MUD; DARK LIQUID FORM,COMPLEX BLEND OF DIMER
AND TRIMER POLYMERIC FATTY ACIDS,FOR USED TO INCREASE LOW-SHEAR
RHEOLOGY, WHILE HAVING ONLY A SLIGHT EFFECT ON YIELD POINT,COMPLEX
BLEND OF DIMER AND TRIMER POLYMERIC FATTY ACIDS,55
GAL.DRUM,APPEARANCE: DARK LIQUID, SPGR: 0.95 GM/CC, FLASH POINT 475
DEG F (246 C), ODOR: FATTY ACID, FREEZING POINT: NOT DETERMINED, BOILIING
POINT: 300 C, SOLUBILITY: INSOLUBLE IN WATER, DENSITY@20DEG C IS 0.95,
OTHER ASSOCIATED ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL AND/OR
ADVERSELY AFFECT FLUID PROPERTIES.
ADDITIVE DRILLING FLUID; LIQUID FORM,NITROGEN,FOR ADMIXTURE
HYDROGEN SULFIDE SCAVENGER FOR USE IN WATER-BASE MUD AND INVERT
EMULSION OIL-BASE MUD. NITROGEN-BASED ORGANIC LIQUID COMPOUND.
READILY AVAILABLE FOR APPLICATION AND CAN BE USED IN COLD AND WARM
TEMPERATURES.,A NITROGEN-BASED, NON-ZINC
COMPOUND,DRUM,APPEARANCE: AMBER LIQUID. S PH: 9 - 11.5 SOLUBILITY IN
WATER: SOLUBL FLASH POINT (METHOD): >212F POUR POINT: < - 4 F.
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000022538
1000789179
1000845182
52
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
153
Chemicals
(Drilling Fluids)
154
Chemicals
(Drilling Fluids )
155
2015
Chemicals
(Drilling Fluids)
Material Description
Material Long Description
ADDITIVE DRILLING FLUID; LIQUID COLORLESS FORM,SODIUM BROMIDE
SOLUTION,FOR USED AS A SINGLE-SALT BRINE WITH MIN DENSITY OF 12.35
SODIUM BROMIDE (NaBr) SOL LB/GAL @ 60 DEG F. IT IS THERMALLY AND CHEMICALLY STABLE AND GENERALLY
12.35 LB/GAL
USED TO PREPARE DENSE CLEAR FLUIDS FOR USE IN DRILLING, COMPLETION OR
WORK-OVER OF OIL OR GAS WELLS.,SODIUM BROMIDE,IBC,COLORLESS LIQUID.
ASSAY: MIN 4.
ADMIXTURE: DRILLING MUD; GROUND MARBLE: MEDIUM GRADE; 135-165
MICRON PARTICLE SIZE; PURE METAMORPHOSED ADMIXTURE DRILLING MUD;
DRY, FREE FLOWING GRANULES FORM,CALCIUM CARBONATE (CACO3)
METAMORPHOSED,FOR USED AS BRIDGING AGENT IN BRINE-BASED OIL-BASED
AND SALT SATURATED FLUIDS TO CONTROL FLUID LOSSES INTO RESERVOIR
ROCKS,GROUND MARBLE MEDIUM ,135-165 MICRON PURE METAMORPHOSED
CALCIUM CARBONATE CACO3 & CAMG (CO3)2,BREATHLESS 1000 KG OR 2200 LB
BAG,PROPERLY LABELED, VENDOR'S NAME, MANUFACTURER'S NAME AND
LOCATION, PRODUCTION DATE, BATCH NO. AND STOCK NO. SIZED
Marble Madium CaCO3, 135-165,
METAMORPHIC CALCIUM CARBONATE GROUND LIMESTONE OR BLENDS
2200 LB
W/LIMESTONE ARE NOT ACCEPTABLE 135-165 MICRON PARTICLE, 95% SOLUBLE
IN 15% HCL ACID, TYPE "MEDIAN D-50", LIFTING STRAP BAG IS DISPOSABLE,
WATERPROOF, UV STABILIZED, STACKABLE & WITHOUT BOTTOM SPOUT,
MINIMUM TENSILE STRENGTH FACTOR 5 FLEXURAL STRENGTH SUFFICIENT TO
SUSTAIN NORMAL HANDLING & OUTDOOR STORAGE FOR THE PRODUCT'S SHELF
LIFE IN SAUDI ARABIAN CLIMATIC CONDITIONS..THE DISPOSABLE SUPER SACKS
SHOULD HAVE AT LEAST 75% OF THEIR SHELF LIFE REMAINING WHEN SHIPPED
OR RECEIVED AT DESIGNATED PLACE OF # DELIVERY TO SAUDI ARAMCO.
CAUSTIC SODA - NAOH
ADMIXTURE: DRILLING MUD; SODIUM HYDROXIDE (CAUSTIC SODA) ADMIXTURE
DRILLING MUD; DRY, WHITE FREE FLOWING FLAKES, BEADS OR PELLETS, MAIN
COMPONENT: SODIUM HYDROXIDE, NAOH FORM,SODIUM HYDROXIDE
(NAOH),FOR USED FOR PH AND ALKALINITY CONTROL. CAUSTIC SODA MINIMIZE
THE SOLUBILITY OF CALCIUM AND MAGNESIUM IN DRILLING FLUIDS,SODIUM
HYDROXIDE (CAUSTIC SODA),22.7 KG OR 50 LB STEEL DRUM,DRUM WITH
MINIMUM 7 IN TOP OPENING & LOW DENSITY POLYETHYLENE INNER LINER.
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000847075
1000021819
1000021749
53
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
156
157
158
2015
Category
Chemicals
(Drilling Fluids )
Chemicals
(Drilling Fluids )
Chemicals
(Drilling Fluids)
Material Description
Material Long Description
Material Number
9COM/9CAT
BIOCIDE - GLUTARALDEHYDE
EPOXY PLASTIC CAN, GLUTARALDEHYDE ADMIXTURE DRILLING MUD; AQUEOUS
SOLUTION FORM,GLUTARALDEHYDE,FOR A MICROBIOCIDE USED IN DRILLING
FLUIDS TO CONTROL AEROBIC AND ANAEROBIC BACTERIA INCLUDING SULFATE
REDUCERS,AQUEOUS SOLUTION OF GLUTARALDEHYDE,5 GAL PLASTIC
CAN,CORROSIVE TO COMMON METAL, IDEAL STORAGE TEMPERATURE 80 DEG F,
IN EPOXY PLASTIC CONTAINER CONTAINER PROPERLY LABELED, VENDOR'S NAME
MANUFACTURER'S NAME AND LOCATION PRODUCTION DATE AND BATCH
NO.PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB
CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO).THE
ORIGINAL MANUFACTURER, (COA) AND CERTIFICATE OF ORIGIN (COO).
1000021556
WATER SOLUBLE CORROSION
INHIBITOR
INHIBITOR: CORROSION; 55-GAL DRUM. INHIBITOR; CORROSION, COAT B-1400
TYPE,55 GAL DRUM,CATIONIC, WATER SOLUBLE, HETEROCYCLIC AMINE,
BLENDED WITH METHANOL MICROBIOSTAT TO CONTROL AEROBIC & ANAEROBIC
BACTERIA GROWTH, USE AS A CORROSION INHIBITOR PACKER FLUID.PRODUCT
MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF
ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO).
1000022136
WALNUT SHELLS
ADMIXTURE: DRILLING MUD; 25 KG (50 LB) SACK; SHIPMENT OF PRODUCT SHALL
CONFORM TO SAUDI ARAMCO EXPORT ADMIXTURE DRILLING MUD; GROUND
FORM,WALNUT SHELLS,FOR LOSS CIRCULATION MATERIAL,25 KG OR 50 LB
BAG,SPECIFIED AS 39.8% ON MESH NO 8, 45.4% ON MESH NO 30, 4.2% THRU
MESH NO 40, 4.2% THRU MESH NO 70, 1.7% THRU MESH NO 100, NOT MORE
THAN 4.7% THRU MESH NO 100 SHIPMENT OF PRODUCT SHALL CONFORM TO
SAUDI ARAMCO EXPORT PACKING MANUAL NOTE: THE CONSTRUCTION OF THE
MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 75 LB
MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 75 LB MIN. NATURAL
KRAFT PAPER. 3RD PLY 80 LB MIN.
1000021811
Saudi Aramco: Company General Use
54
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
Material Description
159
Chemicals
(Drilling Fluids)
SODIUM BICARBONATE
160
Chemicals
(Drilling Fluids )
DEGREASER, 55 GAL
2015
Material Long Description
ADMIXTURE: DRILLING MUD; 25 KG (50 LB); SODUM BICARBONATE ADMIXTURE
DRILLING MUD; DRY, WHITE FINE CRYSTALLINE POWDER FORM,SODIUM
BICARBONATE (NAHCO3),FOR FOR TREATING CEMENT CONTAMINATION AND TO
PRECIPITATE SOLUBLE CALCIUM IN DRILLING FLUIDS BASE MUD,SODIUM
BICARBONATE,25 KG OR 50 LB BAG,API 13A,PACKED IN KRAFT PLIES & (1)
WATERPROOF POLY LINER PLY SACKS, SHIPMENT OF PRODUCT SHALL CONFORM
TO SAUDI ARAMCO EXPORT PACKING MANUAL MULTI-MOISTURE-PROOF BAGS.
NO PARTICLES GREATER THAN 2MM IN ANY DIMENSION NOTE: THE
CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS
FOLLOWS: 1ST PLY 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 75
LB MIN. NATURAL KRAFT PAPER. 3RD PLY SEPARATE INNER BAG LINER, HIGH
DENSITY ORIENTED AND CROSS-LAMINATED INNER LINER (TUBULAR SHAPE)
MADE OF POLYETHYLENE RESIN MATERIAL WITH A MINIMUM WALL THICKNES
OF 0.1 MM. 4TH PLY 80 LB MIN. NATURAL KRAFT PAPER (EXTERIOR PLY) THE BAG
MUST BE VALVE/SPOUT TYPE, COMPLETELY SEALED, MOISTURE AND WATER
PROOF.
DEGREASER: GENERAL PURPOSE; SLIK NO. 5; 55 GALLON DRUM. CLEANER;
DEGREASER, GENERAL PURPOSE TYPE,LIQUID FORM,FOR RIGS, CUTTING WASH
FOR OIL MUD SYSTEMS & OIL SLICK DISPERSANT,55 GAL DRUM,TYPE "SLIK NO 5",
SOLUBLE IN WATER & ORGANIC SOLVENTS REQUIRES SAUDI ARAMCO HAZCOM
LABEL IN MM# 1000644175..PRODUCT MANUFACTURER AND OR SUPPLIER
REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF
ORIGIN (COO).
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000021745
1000022131
55
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
Material Description
161
Chemicals
(Drilling Fluids )
MICA COARSE, 55 LB
162
Chemicals
(Drillning Fluids)
MICA FINE, 55 LB
2015
Material Long Description
ADMIXTURE: DRILLING MUD; 25 KG (50 LB) MULTI-WALL SACK; SHIPMENT OF
PRODUCT SHALL CONFORM TO SAUDI ADMIXTURE DRILLING MUD; COARSE
FORM,MICA,FOR LOST CIRCULATION,25 KG OR 50 LB BAG,17 LB/FT MAXIMUM,
SIEVE SPECIFICATION 2% ON MESH NO 6, 22% ON MESH NO 8, 28% ON MESH NO
12, 20% ON MESH NO 16, 15% ON MESH NO 20, 9% ON MESH NO 40, 4% THRU
MESH NO 40 MULTI-PLY BAG, SHIPMENT OF PRODUCT SHALL CONFORM TO
SAUDI ARAMCO EXPORT PACKING MANUAL NOTE: THE CONSTRUCTION OF THE
MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 75 LB
MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 75 LB MIN. NATURAL
KRAFT PAPER. 3RD PLY 80 LB MIN. NATURAL KRAFT PAPER (EXTERIOR PLY) THE
BAG DOES NOT HAVE AN INNER POLYETHYLENE LINER THE BAG MUST BE
VALVE/SPOUT TYPE COMPLETELY SEALED. THE ORIGINAL MANUFACTURER,
PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL,
EXPIRATION DATE IF REQUIRED STOCK NUMBER AND COUNTRY OF ORIGIN BE
PRINTED ON THE CONTAINER ITSELF WHETHER IT IS DRUM, BIG BAGS AND/OR
PAPER BAGS.PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO
SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO).
ADMIXTURE: DRILLING MUD; 25 KG (50 LB) MULTI-WALL SACK; SHIPMENT OF
PRODUCT SHALL CONFORM TO SAUDI ADMIXTURE DRILLING MUD; FINE
FORM,MICA,FOR LOST CIRCULATION,25 KG OR 50 LB BAG,17 LB/FT MAXIMUM,
SIEVE SPECIFICATION 2% ON MESH NO 20, 2% ON MESH NO 30, 12% ON MESH
NO 40, 28% ON MESH NO 50, 24% ON MESH NO 70, 16% ON MESH NO 100, 16%
THRU MESH NO 100 MULTI-WALL BAG, SHIPMENT OF PRODUCT SHALL
CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL NOTE: THE
CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS
FOLLOWS: 1ST PLY 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 75
LB MIN. NATURAL KRAFT PAPER. 3RD PLY 80 LB MIN. NATURAL KRAFT PAPER
(EXTERIOR PLY) THE BAG DOES NOT HAVE AN INNER POLYETHYLENE LINER THE
BAG MUST BE VALVE/SPOUT TYPE COMPLETELY SEALED.
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000021679
1000021678
56
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
163
164
165
2015
Category
Chemicals
(Drilling Fluids )
Chemicals
(Drilling Fluids)
Chemicals
(Drilling Fluids)
Material Description
Material Long Description
Material Number
9COM/9CAT
SODIUM SULFITE
CHEMICAL; GR COMMERCIAL HIGH,SODIUM SULFITE,FOR REMOVE TRACES OF
DISSOLVED OXYGEN,POWDER FORM,60 KG (132 LB) PLASTIC RIMMED FIBER OR
METAL DRUM WITH POLYETHYLENE LINER,95% ANHYDROUS SODIUM SULFITE BY
WT MIN, CATALYZED WITH COBALT -0.03% BY WT MIN,OXYGEN SCAVENGER,26SAMSS-027,REQUIRES SAUDI ARAMCO HAZCOM LABEL IN MM# 1000644272..
THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE OF
PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE
PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS
AND/OR PAPER BAGS.
1000185026
CALCIUM HYDROXIDE - LIME
ADMIXTURE: DRILLING MUD; 25 KG/SACK; CALCIUM HYDROXIDE (HYDRATED
LIME) ADMIXTURE DRILLING MUD; DRY, FREE FLOWING FINE POWDER
FORM,CALCIUM HYDROXIDE, CA(OH)2 (TECHNICAL GRADE),FOR TO CONTROL PH,
BICARBONATE, AND H2S CONTAMINATION. LIME IS ALSO A PRIMARY
COMPONENT OF INVERT EMULSION MUDS,CALCIUM HYDROXIDE (HYDRATED
LIME),25 KG OR 50 LB BAG,SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI
ARAMCO EXPORT PACKING MANUAL MULTI-WALLED PAPER BAGS, CONTAINER
PROPERLY LABELED, W/VENDOR'S NAME, MANUFACTURER'S NAME AND
LOCATION, PRODUCTION DATE AND BATCH NO. NOTE: THE CONSTRUCTION OF
THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 75
LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 75 LB MIN. NATURAL
KRAFT PAPER. 3RD PLY 80 LB MIN. NATURAL KRAFT PAPER (EXTERIOR PLY) THE
BAG DOES NOT HAVE AN INNER POLYETHYLENE LINER
1000021558
ACRYLIC COPOLYMER BASE,
SWEEPING AGENT
ADDITIVE DRILLING FLUID; SOLID FORM,ACRYLIC COPOLYMER BASE,FOR TO
PROVIDE VISCOSITY, REDUCE FRICTION, ENCAPSULATE CUTTINGS AND PROVIDE A
LIMITE AMOUNT OF FLUID-LOSS CONTROL IN WATER-BASE DRILLING FLUIDS. IT IS
A POLYMER STICK THATEASILY ADDED TO THE DRILLSTRING DURING
CONNECTIONS AND PROVIDES A CONSISTENT METHOD OF,ACRYLIC COPOLYMER
BASE,PAIL,APPEARANCE: TUBE FILLED WI STICK SPECIFIC GRAVITY: 1.0 SOLUBILITY
SOLUBLE IN WATER SIZE: 1-1/4 X 15 IN.
1000876207
Saudi Aramco: Company General Use
57
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
166
167
2015
Category
Chemicals
(Drilling Fluids )
Chemicals
(Drilling Fluids )
Material Description
Material Long Description
ADMIXTURE: DRILLING MUD; GROUND MARBLE: COARSE GRADE; (550-650)
MICRON PARTICLE SIZE; PURE METAMORPHOSED ADMIXTURE DRILLING MUD;
DRY, FREE FLOWING GRANULES FORM,CALCIUM CARBONATE (CACO3)
METAMORPHOSED,FOR USED AS BRIDGING AGENT IN BRINE-BASED OIL-BASED
AND SALT SATURATED FLUIDS TO CONTROL FLUID LOSSES INTO RESERVOIR
ROCKS,GROUND MARBLE COARSE, 550-650 MICRON PURE, METAMORPHOSED
CALCIUM CARBONATE CACO3 & CAMG (CO3)2,BREATHLESS 1000 KG OR 2200 LB
BAG,PROPERLY LABELED, VENDOR'S NAME, MANUFACTURER'S NAME AND
LOCATION, PRODUCTION DATE, BATCH NO. AND STOCK NO. SIZED
Marble Chips CaCO3, 550-650,
METAMORPHIC CALCIUM CARBONATE GROUND LIMESTONE OR BLENDS
2200 LB
W/LIMESTONE ARE NOT ACCEPTABLE 550-650 MICRON PARTICLE, 95% SOLUBLE
15% HCL ACID, TYPE "MEDIAN D-50", LIFTING STRAP BAG IS DISPOSABLE,
WATERPROOF, UV STABILIZED, STACKABLE & WITHOUT BOTTOM SPOUT,
MINIMUM TENSILE STRENGTH FACTOR 5 FLEXURAL STRENGTH SUFFICIENT TO
SUSTAIN NORMAL HANDLING & OUTSIDE STORAGE FOR THE PRODUCT'S SHELF
LIFE IN SAUDI ARABIAN CLIMATIC CONDITIONS.THE DISPOSABLE SUPER SACKS
SHOULD HAVE AT# LEAST 75% OF THEIR SHELF LIFE REMAINING WHEN # SHIPPED
OR RECEIVED AT DESIGNATED PLACE OF # DELIVERY TO SAUDI ARAMCO.
OIL SOLUBLE CORROSION
INHIBITOR
INHIBITOR: CORROSION; 55-GAL DRUM. INHIBITOR; CORROSION, COAT-415
TYPE,55 GAL DRUM,CATIONIC, OIL SOLUBLE, DISPERSIBLE IN WATER BASED
DRILLING MUDS, FILMING POLYAMINE SALT OF A MODIFIED FATTY ACID FOR
DRILL PIPE PROTECTION.PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED
TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN
(COO). THE ORIGINAL MANUFACTURER, PRODUCT NAME, BATCH NUMBER, DATE
OF PRODUCTION OF MATERIAL, EXPIRATION DATE AND COUNTRY OF ORIGIN BE
PRINTED ON THE CONTAINER OR DRUM, WHETHER IT IS IBC TOTE, BIG BAGS
AND/OR PAPER BAGS.
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000021818
1000022134
58
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
168
2015
Category
Chemicals
(Drilling Fluids)
Material Description
Material Long Description
Material Number
9COM/9CAT
CALCIUM CHLORIDE (94-98%)
100 lb/BAG
ADDITIVE: CEMENT; 50 KG, CALCIUM CHLORIDE (94-98%) ADMIXTURE CEMENT;
FOR A WATER SOLUBLE WEIGHTING AGENT FOR FORMULATING SOLIDS-FREE
COMPLETION BRINES AND TO PROVIDE THE DESIRED WATER PHASE ACTIVITY IN
INVERT EMULSION MUDS. ALSO USED AS AN ACCELERATOR IN OIL WELL CEMENT
SLURRIES,TYPE 1,94-98% CALCIUM CHLORIDE (CAC12) POWDER, FLAKES OR
PELLETS,50 KG OR 100 LB BAG,ASTM D98,WATERPROOF POLYETHYLENE LINED
BAG SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT
PACKING MANUAL NO PARTICLES GREATER THAN 5MM IN ANY DIMENSION,
MULTI-WALL MOISTURE-PROOF POLYETHYLENE LINED BAGS CONTAINER
PROPERLY LABELED, W/ VENDOR'S NAME, MANUFACTURER'S NAME AND
LOCATION, PRODUCTION DATE, BATCH NO. AND SAUDI ARAMCO STOCK
NUMBER, FORM DRY, FREE FLOWING FLAKES, GRANULES OR PELLETS NOTE: THE
CONSTRUCTION OF THE MULTI-WALLED PAPER BAG SHALL BE AS FOLLOWS: 1ST
PLY 50 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 50 LB MIN.
NATURAL KRAFT PAPER 3RD PLY SEPARATE INNER BAG LINER, HIGH DENSITY
ORIENTED AND CROSS-LAMINATED INNER LINER (TUBULAR SHAPE) MADE OF
POLYETHYLENE RESIN MATERIAL WITH A MINIMUM WALL THICKNES OF 0.1 MM.
4TH PLY 50 LB MIN.
1000022536
Saudi Aramco: Company General Use
59
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
169
Chemicals
(Drilling Fluids )
170
Chemicals
(Drilling Fluids)
171
Chemicals
(Drilling Fluids)
2015
Material Description
Material Long Description
ADMIXTURE: DRILLING MUD GROUND NONTREATED BENTONITE ADMIXTURE
DRILLING MUD; DRY, FREE FLOWING POWDER FORM,BENTONITE SODIUM
MONTMORILLONITE,FOR VISCOSIFIER AND FILTRATE REDUCER FOR WATERBASED FLUIDS,NATURAL SMECTITE (SODIUM MONTMORILLONITE) THAT
CONTAINS NO POLYMERS OR ANY OTHER CHEMICALS,MULTI-WALLED BAGS, 25
KG OR 50 LB BAG,API 13A AND API 13 I (LATEST EDITION),CONTAINER TO BE
PROPERLY LABELED W/VENDOR'S NAME, MANUFACTURER'S NAME AND
LOCATION, PRODUCTION DATE, BATCH NUMBER AND STOCK NUMBER. OTHER
ASSOCIATED ELEMENTS IN THE COMPOSITION MUST NOT BE HARMFUL TO
NONTREATED SODIUM
PERSONNEL AND/OR ADVERSELY AFFECT FLUID PROPERTIES. PROPER TUBE
BENTONITE 25KG SACK
SAMPLING AND QUARTERING TO BE CARRIED OUT BY TRAINED AND
EXPERIENCED PERSONNEL. NOTE: THE CONSTRUCTION OF THE MULTI-WALLED
PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 75 LB MIN. NATURAL
KRAFT PAPER (INTERIOR PLY) 2ND PLY 75 LB MIN. NATURAL KRAFT PAPER. 3RD
PLY 80 LB MIN. NATURAL KRAFT PAPER (EXTERIOR PLY) THE BAG DOES NOT HAVE
AN INNER POLYETHYLENE LINER THE BAG MUST BE VALVE/SPOUT TYPE
COMPLETELY SEALED.PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED
TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN
(COO).
ADDITIVE DRILLING FLUID; POWDER FORM,MANGANESE TETRAOXIDE,FOR
MANGANESE TETRAOXIDE IS AN INORGANIC COMPOUND WHICH IS USED TO
MANGANESE TETRAOXIDE - BAG PREPARE HIGH DENSITY FLUIDS FOR USE IN DRILLING, COMPLETION OR WORKOVER OF OIL OR GAS WELLS.,MANGANESE TETRAOXIDE,BAG,APPEARANCE:
REDDISH-BROWN POWD.
ADMIXTURE: DRILLING MUD; 25 KG (50 LB) 4 PLY PAPERSACK; SHIPMENT OF
PRODUCT SHALL CONFORM TO SAUDI ADMIXTURE DRILLING MUD; COARSE
FORM,COTTONSEED HULLS,FOR LOST CIRCULATION,FINES & DUST FREE,25 KG OR
50 LB BAG,SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT
PACKING MANUAL NOTE: THE CONSTRUCTION OF THE MULTI-WALLED PAPER
BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 75 LB MIN. NATURAL KRAFT
COTTONSEED HULLS, 55 LB
PAPER (INTERIOR PLY) 2ND PLY 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY
SEPARATE INNER BAG LINER, HIGH DENSITY ORIENTED AND CROSS-LAMINATED
INNER LINER (TUBULAR SHAPE) MADE OF POLYETHYLENE RESIN MATERIAL WITH
A MINIMUM WALL THICKNES OF 0.1 MM. 4TH PLY 80 LB MIN. NATURAL KRAFT
PAPER (EXTERIOR PLY) THE BAG MUST BE VALVE/SPOUT TYPE, COMPLETELY
SEALED, MOISTURE AND WATER PROOF.
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000021551
1000845612
1000021603
60
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
172
173
174
2015
Category
Chemicals
(Drilling Fluids)
Chemicals
(Drilling Fluids)
Chemicals
(Drilling Fluids )
Material Description
Material Long Description
Material Number
9COM/9CAT
BAROFIBER COARSE, 40 LB
ADMIXTURE DRILLING MUD; ADDITIVE, FIBROUS CELLULOSIC MATERIAL
FORM,FIBROUS CELLULOSIC MATERIAL,FOR DESIGNED TO EFFECTIVELY SEAL THE
BOREHOLE WALL IN SAND AND FRAC AND TO STOP THE LOSS OF DRILLING FLUID
BY PLUGGING THE VOIDS,FIBROUS CELLULOSIC MATERIAL,40
LB/SACK,APPEARANCE: COARSE:GRANUALTED MATERIAL, BULK DENSITY: 31
LB/FT(497 KG/M), PH 4.9, SPECIFIC GRAVITY: 1.3, ODOR: ODORLESS,
DENSITY@20C (KG/L) 1.1, FREEZING POINT 190 C, FLASH POINT 193 C, SOLUBILITY
IN WATER: INSOLUBLE, OTHER ASSOCIATED ELEMENTS MUST NOT BE HARMFUL
TO PERSONNEL AND/OR ADVERSELY AFFECT FLUID PROPERTIES.
1000789221
LIQUID PHPA
ADMIXTURE: DRILLING MUD; PARTIALLY HYDROLIZED POLYACRYLAMIDE (PHPA);
MINIMUM 32% ACTIVE NON CONFIGURED; ADMIXTURE: DRILLING MUD,
PARTIALLY HYDROLIZED POLYACRYLAMIDE (PHPA), MINIMUM 32% ACTIVE FROM
LIQUID BASE MATERIAL PARTIALLY HYDROLIZED POLYACRYLAMIDE SERVICE
SHALE STABILIZER COMPOSITION 32% ACTIVE CONTAINER 5 GAL/CAN
STANDARDS SUPPLEMENTARY REQUIREMENTS DRILLING FLUID ADDITIVE
1000021673
ADMIXTURE: DRILLING MUD; MARBLE CHIPS: (1900-2100 MICRONS)
METAMORPHIC CALCIUM CARBONATE CACO3 & CAMG (CO3)2 ADMIXTURE
DRILLING MUD; DRY CHIPS FORM,CALCIUM CARBONATE (CACO3)
METAMORPHOSED,FOR USED AS BRIDGING AGENT IN BRINE-BASED, OIL-BASED
AND SALT SATURATED FLUIDS TO CONTROL FLUID LOSSES INTO RESERVOIR
ROCKS,(1900-2100 MICRONS) METAMORPHIC CALCIUM CARBONATE, PURE,
SOLUBLE,BREATHLESS 1000 KG OR 2200 LB BAG,PROPERLY LABELED, VENDOR'S
NAME, MANUFACTURER'S NAME AND LOCATION, PRODUCTION DATE,BATCH NO.
AND STOCK NO. SIZED METAMORPHIC CALCIUM CARBONATE, LIMESTONE CHIPS
Marble Chips CaCO3, 1900-2100,
ARE NOT ACCEPTABLE, LIFTING STRAP BAG IS DISPOSABLE, WATERPROOF, UV
2200 LB
STABILIZED, STACKABLE & WITHOUT BOTTOM SPOUT MINIMUM TENSILE
STRENGTH FACTOR 5, FLEXURAL STRENGTH SUFFICIENT TO SUSTAIN NORMAL
HANDLING & OUTSIDE STORAGE FOR THE PRODUCT'S SHELF LIFE IN SAUDI
ARABIAN CLIMATIC CONDITIONS.THE DISPOSABLE SUPER SACKS SHOULD HAVE
AT LEAST 75% OF THEIR SHELF LIFE REMAINING (THE PERIOD FROM THE DATE OF
MANUFACTURE TO THE WARRANTED EXPIRATION DATE) WHEN SHIPPED OR
RECEIVED AT DESIGNATED PLACE OF DELIVERY TO SAUDI ARAMCO.#REFER TO
SAP NUMBER: 1000840600 FOR DISPOSABLE SUPER SACKS SPECIFICATION..
Saudi Aramco: Company General Use
1000021677
61
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
175
Chemicals
(Drillning Fluids)
176
Chemicals
(Drilling Fluids)
2015
Material Description
Material Long Description
ADMIXTURE: DRILLING MUD; GROUND MARBLE: MEDIUM GRADE; 135-165
MICRON PARTICLE SIZE; PURE METAMORPHOSED ADMIXTURE DRILLING MUD;
DRY, FREE FLOWING GRANULES FORM,CALCIUM CARBONATE (CACO3)
METAMORPHOSED,FOR USED AS BRIDGING AGENT IN BRINE-BASED OIL-BASED
AND SALT SATURATED FLUIDS TO CONTROL FLUID LOSSES INTO RESERVOIR
ROCKS,GROUND MARBLE MEDIUM ,135-165 MICRON PURE METAMORPHOSED
CALCIUM CARBONATE CACO3 & CAMG (CO3)2,MULTI-WALLLED, 25 KG OR 50 LB
Marble Medium CaCO3, 135-165,
BAG,PROPERLY LABELED, VENDOR'S NAME, MANUFACTURER'S NAME AND
55 LB
LOCATION, PRODUCTION DATE, BATCH NO. AND STOCK NO. SIZED
METAMORPHIC CALCIUM CARBONATE GROUND LIMESTONE OR BLENDS
W/LIMESTONE ARE NOT ACCEPTABLE 135-165 MICRON PARTICLE, 95% SOLUBLE
IN 15% HCL ACID, TYPE "MEDIAN D-50", NOTE: THE CONSTRUCTION OF THE
MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 75 LB
MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 75 LB MIN. NATURAL
KRAFT PAPER. 3RD PLY 80 LB MIN.
CLEANER; CONTACT TYPE,LIQUID FORM,FOR ELECTRIC MOTOR AND
HYDROCARBON BASED
EQUIPMENT,20 LITER CAN,HYDROCARBON BASED CLEANER & DEGREASER,FLASH
DEGREASER
POINT (CLOSED CUP) 63 DEG C, NON-CONDUCTIVE & NON-CORROSIVE,
APPERANCE CLEAR LIQUID.
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000021817
1000732382
62
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
177
Chemicals
(Drilling Fluids )
178
Chemicals
(Drillning Fluids)
2015
Material Description
Material Long Description
ADMIXTURE: DRILLING MUD; GROUND MARBLE: COARSE GRADE; 550-650
MICRON PARTICLE SIZE; PURE METAMORPHOSED ADMIXTURE DRILLING MUD;
DRY, FREE FLOWING GRANULES FORM,CALCIUM CARBONATE (CACO3)
METAMORPHOSED,FOR USED AS BRIDGING AGENT IN BRINE-BASED OIL-BASED
AND SALT SATURATED FLUIDS TO CONTROL FLUID LOSSES INTO RESERVOIR
ROCKS,GROUND MARBLE COARSE, 550-650 MICRON PURE METAMORPHOSED
CALCIUM CARBONATE CACO3 & CAMG (CO3)2,MULTI-WALLED, 25 KG OR 50 LB
BAG,PROPERLY LABELED, VENDOR'S NAME, MANUFACTURER'S NAME AND
LOCATION, PRODUCTION DATE, BATCH NO. AND STOCK NO. SIZED
Marble Chips CaCO3, 550-650, 55
METAMORPHIC CALCIUM CARBONATE GROUND LIMESTONE OR BLENDS
LB
W/LIMESTONE ARE NOT ACCEPTABLE 550-650 MICRON PARTICLE, 95% SOLUBLE
IN 15% HCL ACID, TYPE "MEDIAN D-50", NOTE: THE CONSTRUCTION OF THE
MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 75 LB
MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 75 LB MIN. NATURAL
KRAFT PAPER. 3RD PLY 80 LB MIN. NATURAL KRAFT PAPER (EXTERIOR PLY) THE
BAG DOES NOT HAVE AN INNER POLYETHYLENE LINER THE BAG MUST BE
VALVE/SPOUT TYPE COMPLETELY SEALED.PRODUCT MANUFACTURER AND OR
SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND
CERTIFICATE OF ORIGIN (COO).
ADMIXTURE: DRILLING MUD; DRY CHIPS, (1900-2100 MICRONS) METAMORPHIC
CALCIUM CARBONATE CACO3 & CAMG (CO3)2 ADMIXTURE DRILLING MUD; DRY
CHIPS FORM,CALCIUM CARBONATE (CACO3) METAMORPHOSED,FOR USED AS
BRIDGING AGENT IN BRINE-BASED OIL-BASED AND SALT SATURATED FLUIDS TO
CONTROL FLUID LOSSES INTO RESERVOIR ROCKS,(1900-2100 MICRONS)
METAMORPHIC CALCIUM CARBONATE, PURE, SOLUBLE,MULTI-WALLED, 25 KG
Marble Chips CaCO3, 1900-2100,
OR 50 LB BAG,PROPERLY LABELED, VENDOR'S NAME, MANUFACTURER'S NAME
55 LB
AND LOCATION, PRODUCTION DATE, BATCH NO. AND STOCK NO. SIZED
METAMORPHIC CALCIUM CARBONATE LIMESTONE CHIPS ARE NOT ACCEPTABLE
NOTE: THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER)
SHALL BE AS FOLLOWS: 1ST PLY 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR
PLY) 2ND PLY 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY 80 LB MIN.
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000021815
1000021676
63
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
179
180
2015
Category
Chemicals
(Drilling Fluids )
Chemicals
(Drilling Fluids)
Material Description
Material Long Description
ADMIXTURE: DRILLING MUD; GROUND MARBLE: FINE GRADE; 9-11 MICRON
PARTICLE SIZE; PURE METAMORPHOSED ADMIXTURE DRILLING MUD; DRY, FREE
FLOWING GRANULES FORM,CALCIUM CARBONATE (CACO3)
METAMORPHOSED,FOR USED AS WEIGHTING, BRIDGING AND FILTRATE CONTROL
AGENT IN BRINE-BASED OIL-BASED AND SALT SATURATED FLUIDS,GROUND
MARBLE FINE, 9-11 MICRON PURE METAMORPHOSED CALCIUM CARBONATE
CACO3 & CAMG (CO3)2,MUTI-WALLED, 25 KG OR 50 LB BAG,PROPERLY LABELED,
VENDOR'S NAME, MANUFACTURER'S NAME AND LOCATION, PRODUCTION
DATE,BATCH NO. AND STOCK NO. SIZED METAMORPHIC CALCIUM CARBONATE
MARBLE FINE, PURE CaCO3 - 55
GROUND LIMESTONE OR BLENDS W/LIMESTONE ARE NOT ACCEPTABLE 9-11
LB BAGS
MICRON PARTICLE, 95% SOLUBLE IN 15% HCL ACID, TYPE "MEDIAN D-50", NOTE:
THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE
AS FOLLOWS: 1ST PLY 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY
75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY 80 LB MIN. NATURAL KRAFT PAPER
(EXTERIOR PLY) THE BAG DOES NOT HAVE AN INNER POLYETHYLENE LINER THE
BAG MUST BE VALVE/SPOUT TYPE COMPLETELY SEALED.PRODUCT
MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF
ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO).
THINNER MODIFIED TANNIN DRILL THIN
ADDITIVE DRILLING FLUID; BROWN COLORED POWDER FORM,MODIFIED TANNIN
COMPOUND,FOR USED AS MUD CONDITIONER PROVIDING RHEOLOGY CONTROL
IN WATER BASE FLUIDS WITH MAXIMUM DEFLOCCULATING AND SHEAR
STRENGTH REDUCTION AT LOW CONCENTRATIONS.,25 LB MULITIWALL PAPER
BAGS,APPEARANCE: BROWN COLORED POWD,CONTAINER MUST BE PROPERLY
LABELED WITH, VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION,
PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO WILL CARRY OUT
PROPER SAMPLING AND TESTING AS NEEDED. PRODUCT MANUFACTURER AND
OR SUPPLIER REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA) AND
CERTIFICATE OF ORIGIN (COO).
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000021814
1000845427
64
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
181
Category
Chemicals
(Drilling Fluids)
182
Chemicals
(Drilling Fluids)
183
Chemicals
(Drilling Fluids)
2015
Material Description
Material Long Description
ADDITIVE DRILLING FLUID; GREY POWDER FORM,VISCOSIFIER FOR IN-HOUSE
CEMENT SPACER SYSTEM,,FOR COMPONENT OF AN IN-HOUSE CEMENT SPACER
SYSTEM FOR USE WITH OBM (OIL-BASE-MUD) SYSTEMS, OR OTHER COMPATIBLE
MUD SYSTEMS DESIGNED TO PROVIDE FLUID LOSS CONTROL AND VISCOSITY
ALLOWING USERS TO EASILY FORMULATE A CEMENT SPACER WITH THE DESIRED
RHEOLOGY CERTIFICATE OF ORIGIN COO DENSITY THIS VISCOSIFIER I LOSURFCEMENT SPACER VISCOSIFIER, IN259 SAP #1000811529 A SYSTEM TO FORMULATE -S SAP # 1000903745 ENT
HOUSE
SPACER DESIGNS FOR IDS PACKAGED IN 50-LB COMBINATION WITH DIACEL®
TIWALL WATER RESISTANT BAGS ANALYSIS (COA) WITH NON-AQUEOUS DRILLING
DER TO SUBMIT CERTIFICATE,PROPRIETARY. COMPONENT FOR USE IN IN-HOUSE
CEMENT SPACER SYSTEM,BAG,APPEARANCE: OFF-WHITE POWDE SPECIFIC
GRAVITY: 2.08 G/M TEMPERATURE: 40°F - 400°F CONCENTRATION: 2-22 LBS/BB.
Material Number
9COM/9CAT
1000903746
ADDITIVE DRILLING FLUID; LIQUID FORM,ANTI-FOAMER FOR IN-HOUSE CEMENT
SPACER SYSTEM,FOR COMPONENT OF AN IN-HOUSE CEMENT SPACER SYSTEM
FOR USE WITH OBM (OIL-BASE-MUD) SYSTEMS, OR OTHER COMPATIBLE MUD
SYSTEMS DESIGNED TO PREVENT AIR-ENTRAPMENT AND USED DURING MIXING
TO PROVIDE AN ACCURATE FLUID WEIGHT. THIS ANTI-FOAMER IS USED IN
CEMENT SPACER ANTI-FOAMER, COMBINATION LOSURF-259(SAP# 1000811529 A SYSTEM TO FORMULATE ENT
SPACER DESIGNS FOR USE TIFICATE . TIFICATE OF ORIGIN COO IDS PACKAGED IN
IN-HOUSE
A 5 GALLON -ANALYSIS (COA) AND STIC PAIL .VENDER TO SUBMIT COSIFIER (SAP#
1000903746) H DIACEL® ADJUSTABLE SPACER H NON -AQUEOUS
DRILLING,PROPRIETARY. COMPONENT FOR USE IN IN-HOUSE CEMENT
SPACER,PAIL,APPEARANCE: VISCOUS WHITE SPECIFIC GRAVITY = 1.00 G BOILING
POINT > 35 C (>95F VISCOSITY: 10000 CST FLASHPOINT: > 101.1°C (>21.
1000903745
CHEMICAL; GR FOOD,SODIUM HEXAMETAPHOSPHATE,FOR POTABLE WATER
TREATMENT,GRANULAR FORM,40-45 KG (88-100 LB) DRUM,SODIUM
HEXAMETAPHOSPHATE,AWWA B502,REQUIRES SAUDI ARAMCO HAZCOM LABEL
IN MM# 1000642502
1000186247
CHEMICAL: SODIUM
HEXAMTAPHOSPHATE
Saudi Aramco: Company General Use
65
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
184
185
2015
Category
Chemicals
(Drilling Fluids)
Chemicals
(Drilling Fluids)
Material Description
Material Long Description
Material Number
9COM/9CAT
Acid Precursor - ORCA-B
ADDITIVE DRILLING FLUID; LIQUID FORM,ORGANIC ESTERS,FOR A LIQUID
ORGANIC ACID PRECURSOR WHICH WILL GENERATE ORGANIC ACID IN#SITU
DOWNHOLE WHICH HAS THE CAPABILITY TO DISSOLVE CALCIUM CARBONATE
FILTER CAKE SOLIDS TO REMOVE FORMATION DAMAGE DUE TO CARBONATE
SOLIDS PLUGGING,55 GAL PER DRUM,A PROPRIETARY BLEND OF ORGANIC
ESTERS,PHYSICAL PROPERTIES:APPEARANCE,A LIQUID ORGANIC ACID PERCURSOR
WHICH WILL GENERATE ORGANIC ACID IN-SITU DOWNHOLE WHICH HAS THE
CAPAVILITY TO DISSOLVE CALCIUM CARBONATE FILTER CAKE SOLIDS TO REMOVE
FORMATION DAMAGE DUE TO CARBONATE SOLIDS PLUGGING. IT IS TO BE USED
TOGETER WITH ORCA-4 WATER-WETTING SURFCTANT IN THE PREPARATION OF
THE PROPRIETARY MUDWASH FILTER-CAKE BREAKER SYSTEM FOR OBM
WELLBORE CLEAN-UP. VENDOR TO SUBMIT CERTIFICATE OF ANALYSIS (COA) AND
CERTIFICATE OF ORIGIN (COO). 210 KG (55 GAL)
1000905195
ADDITIVE DRILLING FLUID; LIQUID FORM,WATER WETTING SURFACTANTS,FOR A
LIQUID WATER WETTING SURFACTANT MIXTURE USED IN THE PREPARATION OF
WELLBORE CLEAN-UP FLUID TO ALTER THE WETTEABILITY OF THE FILTER CAKE
SOLIDS FROM OIL-WET TO WATER # WET.,A WATER-WETTING SURFACTANT
MIXTURE,55 GAL PER DRUM,PHYSICAL PROPERTIES : APPEARAN,#CONTAINER
MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURE'S NAME
LOCATION,PRODUCTION DATE AND BATCH NUMBER SAUDI ARAMCO'S
Water wetting surfactant - ORCAPERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS
4
NEEDED.####A LIQUID WATER WETTING SURFACTANT MIXTURE USED IN THE
PREPARATION OF WELLBORE CLEAN-UP FLUID TO ALTER THE WETTEABLITY OF
THE FILTER CAKE SOLIDS FROM OIL-WET TO WATER-WET. IT IS TO BE USED
TOGETHER WITH ORCA-B THE ACID PRECURSOR IN THE PREPARATION OF THE
PROPRIETARY MUDWASH FILTER CAKE BRAKER SYSTEM FOR OBM WELLBORE
CLEAN-UP. VENDER TO SUBMIT CERTIFICATE OF ANALYSIS (COA) AND
CERTIFICATE OF ORIGIN (COO). 200 KG (55 GAL).
Saudi Aramco: Company General Use
1000905196
66
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
186
187
Category
Chemicals
(Drilling Fluids)
Chemicals
(Drilling Fluids)
Material Description
Material Long Description
Material Number
9COM/9CAT
WBM filter cake removal Enzyme
ADDITIVE DRILLING FLUID; LIQUID FORM,ENZYME PROTEIN,FOR FILTER CAKE
REMOVAL FOR WATER BASED MUD AND BRIDGING PARTICLES PRESENT IN THE
CAKE, REMOVING THE NEAR-WELLBORE DAMAGE,ENZYME PROTEIN,DRUM (ONE
DRUM = 55 GALLONS),APPEARANCE: LIGHT BROWN LIQUID,ADDITIVE FOR
DRILLING FLUID. IT IS A FILTER CAKE REMOVAL FOR WATER BASED MUD WHICH
BREAKS DOWN THE STARCH POLYMERS PRESENT IN THE MUD FILTER CAKE
BREAKING ITS INTEGRITY AND ENABLE MORE EFFICIENT ACIDIZING TREATMENT
OF ACID-SOLUBLE DRILL SOLIDS AND BRIDGING PARTICLES PRESENT IN THE CAKE,
REMOVING THE NEAR-WELLBORE DAMAGE. TYPICAL TREATMENT IS 5 - 6% V/V.
SUPPLIER/VENDOR IS REQUIRED TO SUBMIT LAB CERTIFICATE OF ANALYSIS (COA)
AND CERTIFICATE OF ORIGIN (COO).
1000908540
LOW TOXICITY BASED OIL
FSARALINE 185V
ADDITIVE DRILLING FLUID; CLEAR LIQUID FORM,CLEAN NATURAL GAS
ORIGIN,FOR IT IS LOW TOXICITY MINERAL OIL USE AS BASE OIL FOR
FORMULATING OIL-BASED DRILLING FLUID IT IS COMPATIBLE WITH ALL OIL
BASED DRILLING FLUIDS ADDITIVES. IT IS COMPARABLE WITH LOW TOXICITY
MINERAL OIL AND TS SPECIFICATION OF # 1000022138 AS STATED BEL,A
MIXTURE OF ALKANES. CLEAR AND ODORLESS PARAFFIN OIL,GALLON,TM D1319)
TM D611) TM D93) LYSIS (COA) AND LINE POINT: MORE THAN 75 DE HORIZED
ZENE CONTENT: NIL PPM ASSAY TEST): > 100,000 PPM. RY OUT TIFICATE OF
ORIGIN (COO). SH POINT: MORE THAN 85 DEG 50 (MYSID SHRIMP 96-HR : 0.770.97 (ASTM D1298) FINS CONTENT: NIL PPM KAGING AS PER SAUDI ARAMCO
YNUCLEAR AROMATIC: NIL PPM PLING AND TESTING AS NEEDED DI ARAMCO
PERSONNEL WILL CIFIC GRAVITY AT 15 OC : PLIER/VENDOR IS REQUIRED SUBMIT
LAB CERTIFICATE OF AL AROMATIC: LESS THAN 0.5.
1000908544
188
Chemicals
(Drilling Fluids)
CHEMICAL: GR TECHNICAL,
SODIUM
189
Chemicals
(Drilling Fluids)
CHEMICAL: GR ACS, SODIUM
SULFITE,
2015
CHEMICAL; GR TECHNICAL,SODIUM CARBONATE,FOR WATER
TREATMENT,GRANULAR FORM,40 OR 50 KG SACK,98% CALCINED,SODA ASH
(WASHING SODA),AWWA B201,SHIPMENT OF PRODUCT SHALL CONFORM TO
SAUDI ARAMCO EXPORT PACKING MANUAL REQUIRES SAUDI ARAMCO HAZCOM
LABEL IN MM# 1000644353
CHEMICAL; GR ACS,SODIUM SULFITE,FOR REDUCE FREE CHLORINE & OXYGEN
CONTENT OF RAW WATER PRELIMINARY TO WATER SOFTENING,POWDER
FORM,50 KG (110 LB) DRUM WITH POLYETHYLENE INNER BAG,97% ANHYDROUS
SODIUM SULFITE MIN UNCATALYZED SOLUBLE IN WATER,OXYGEN
SCAVENGER,REQUIRES SAUDI ARAMCO HAZCOM LABEL IN MM# 1000642488
Saudi Aramco: Company General Use
1000186131
1000186443
67
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
Material Description
Material Long Description
190
Chemicals
(Drilling Fluids)
ANTIFREEZE: TRIETHYLENE
GLYCOL, LIQUID
ANTIFREEZE; TRIETHYLENE GLYCOL TYPE,TECHNICAL, LIQUID, 208.2 LITER/ DRUM
TO BE LABELED IN ARABIC AND ENGLISH AS FOLLOWS: TRIETHYLENE GLYCOL S/N
26-922-105-00 REQUIRES SAUDI ARAMCO HAZCOM LABEL IN MM# 1000644191
191
Chemicals
(Drilling Fluids )
ANTIFREEZE; MONO ETHYLENE GLYCOL (MEG) TYPE,SPECIFIC GRAVITY 20/20 C
1.115-1.116, DISTILLATION RANGE 196.0-199.0 DEG C AT 760 MM HG, WATER
(W/W) 0.05% MAX, IRON (PPM W/W) 0.1 MAX, ACIDITY WT AS ACETIC ACID
ANTIFREEZE: MONO ETHYLENE 0.001% MAX, 225-250 KG, 208.2 L (55 GAL) DRUM, TECHNICAL, LIQUID, ARAMCO
GLYCOL (MEG)
LABORATORY ANALYSIS IS REQUIRED, DRUM TO BE LABELED IN ARABIC AND
ENGLISH AS FOLLOWS, "MONO ETHYLENE GLYCOL (MEG)" S/N 26-382-444-00
REQUIRES SAUDI ARAMCO HAZCOM LABEL IN MM# 1000644200
192
Chemicals
(Drilling Fluids)
CHEMICAL; GR USP,CITRIC ACID,FOR LABORATORY,POWDER FORM,50 KG (110 LB)
CHEMICAL: GR USP, CITRIC ACID, NET WT POLYETHYLENE LINED DRUM,99.5% CITRIC ACID MIN,CITRIC ACID
POWDER
(ANHYDROUS),REQUIRES SAUDI ARAMCO HAZCOM LABEL IN MM# 1000644278
193
Chemicals
(Drilling Fluids)
CHEMICAL: GR A, METHANOL,
LIQUID,
194
Chemicals
(Drilling Fluids )
31% HCl, 13 GAL
195
2015
Chemicals
(Drillning Fluids)
SILICA FLOUR
CHEMICAL; GR A,METHANOL,LIQUID FORM,208.2 L (55 US GAL) STEEL
DRUM,SYNTHETIC,METHYL ALCOHOL (WOOD ALCOHOL),ASTM D1152, FED SPEC
O-M-232G GRADE A,DRUM TO BE LABELED IN ARABIC & ENGLISH AS FOLLOWS:
"METHANOL" S/N 26-646-940-00 REQUIRES SAUDI ARAMCO HAZCOM LABEL IN
MM# 1000642494
CHEMICAL; GR TECHNICAL,HYDROCHLORIC ACID,FOR REGENERATION OF
DEMINERALIZER BEDS,LIQUID FORM,49 L (13 GAL) POLYETHYLENE CARBOY
ENCASED IN A WOODEN BOX,31% SOLUTION W/W MIN, IRON 20 PPM MAX,
SULFATE 0.2% MAX, CLORINE (CL2) 100 PPM MAX, ORGANIC CONTAMINANTS
0.05 GM/L MAX,MURIATIC ACID,UN 1789, CAS NO 7647-01-0,US DEPT OF
TRANSPORT HAZARDOUS LABEL "CORROSIVE" MUST BE AFFIXED TO CONTAINER
REQUIRES SAUDI ARAMCO HAZCOM LABEL IN MM# 1000642493
ADDITIVE, DRILLING FLUID: ADDITIVE, CEMENT, 50 KG (100 LB) SACK, TYPE D-66
SILICA FLOUR, WATER LOSS AGENT ADDITIVE DRILLING FLUID; ADDITIVE,
CEMENT, 50 KG (100 LB) SACK, TYPE D-66, SILICA FLOUR, WATER LOSS AGENT.
PRODUCT MANUFACTURER AND OR SUPPLIER REQUIRED TO SUBMIT LAB
CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO).
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000187171
1000182767
1000177936
1000184543
1000183214
1000022429
68
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
196
197
2015
Category
Chemicals
(Drilling Fluids)
Chemicals
(Drilling Fluids)
Material Description
Material Long Description
Material Number
9COM/9CAT
POTASSIUM HYDROXIDE
CHEMICAL; GR TECHNICAL,POTASSIUM HYDROXIDE,FREE FLOWING GRANULAR
OR FLAKES FORM,25 KG (55 LBS)/SACK,POTASSIUM CARBONATE, K2CO3 0.8%
WT, MAXIMUM POTASSIUM CHLORIDE 0.02% WT MAXIMUM, IRON 0.001% WT
MAXIMUM,90% KOH PURITY, SHIPMENT OF PRODUCT SHALL CONFIRM TO SAUDI
ARAMCO EXPORT PACKING MANUAL. SAUDI ARAMCO WILL CARRY OUT
SAMPLING AND TESTING AS NEEDED.
1000185389
FIBER, 25 LB
ADMIXTURE DRILLING MUD; ADDITIVE, FIBROUS CELLULOSIC MATERIAL
FORM,FIBROUS CELLULOSIC MATERIAL,FOR DESIGNED TO EFFECTIVELY SEAL THE
BOREHOLE WALL IN SAND AND FRAC AND TO STOP THE LOSS OF DRILLING FLUID
BY PLUGGING THE VOIDS,FIBROUS CELLULOSIC MATERIAL,25
LB/SACK,APPEARANCE: FINE: BROWN POWDERED, BULK DENSITY: 31 LB/FT(497
KG/M), PH 4.9, SPECIFIC GRAVITY: 1.3, ODOR: ODORLESS, DENSITY@20C (KG/L)
1.1, FREEZING POINT 190 C, FLASH POINT 193 C, OTHER ASSOCIATED ELEMENTS
MUST NOT BE HARMFUL TO PERSONNEL AND/OR ADVERSELY AFFECT FLUID
PROPERTIES.
1000789220
Saudi Aramco: Company General Use
69
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
198
199
2015
Category
Chemicals
(Drilling Fluids )
Chemicals
(Drilling Fluids)
Material Description
Material Long Description
BARITE DISP. BAG, 90X90X100
CM, 1.5 TON
CONTAINER; DISPOSABLE BAG TYPE,SIZE 90 CM X 90 CM X 100 CM,1.5 TON OR
3300 LBS,BARITE,REGULAR BAG SHAPE,TOP STRAP CLOSURE,ORANGE,THE FOUR
LIFITNG STRAPS SHOULD EXTEND TO THE FULL BODY OF THE BAGS, REFERENCE
TO SAUDI ARAMCO PACKING SPECIFICATIONS MS-8314-11, 1. DIMENSION &
WEIGHT: HEIGHT 100 CMS(39"), WIDTH: (90 CMSX 90 CMS) 35" X35", WEIGHT:
2.90 KGS(WITH LINER), VARIANCE ON WEIGHT: 100 GRAMS +/-, LAMINATION:NIL,
2. BODY FABRIC: MATERIAL POLYPROPYLENE, COLOUR: ORANGE, GSM: 200,
MESH: 11X12, 3. GENERAL: SAFE WORKING LOAD: 1500 KGS, SAFETY FACTOR:
5:01, 4. PRINTINGL: ONE SIDE ONE COLOUR, 5. SEWING THREAD: COLOUR:
WHITE, 6. LIFTING LOOP: CROSS CORNER: FOURLOOPS, LOOP WIDTH: 7.5 CMS,
LOOP LENGTH ABOVE THEBAG: 30 CMS, LOOP LENGTH ON THE BAG: 40 CMS,
FULL LOOP: AROUND THE BAG, STEVE DORING LOOP: NIL, FILLING
ARRANGEMENT: SPOUT DIA: 40CMS (16"), LENGTH OF SPOUT: 50CMS (20"),
COLOUR OF SPOUT FABRIC: WHITE, TYPE OF CLOSURE: SIMPLE CLOSURE,
DISCHARGE ARRANGEMENT: NO SPOUT AND BOTTOM MUST BE FLAT, LINER
SPECIFICATIONS: TYPE OF LINER: PILLOW TYPE LOOSE LINER INSERTED AND
FASTENED TO BOTTOM SPOUT, SIZE OF LINER: 190 CMSX 300 CMS, MICRON
THICKNESS OF LINER: 120 MICRON MINIMUM, WEIGHT OF LINER: 1200 GRAMS
+/- 50 GRAMS, WEIGHT OF BAG INCLUSIVE OF LINER: 2700 GRAMS +/- 100
GRAMS, STRENGTH PARAMETERS: BODY FABRIC: 200 GSM WITH RF (STRENGTHABOVE 200KGF), BOTTOM PANEL: 205 GSM (STRENGTH-ABOVE 210KGF), TOP
PANEL: 160 GSM (STRENGTH-ABOVE 130KGF), FILLING AND DISCHARGE SPOUT:
75 GSM (STRENGTH-ABOVE 80KGF), LIFTING LOOP: 55G/M (STRENGTH-ABOVE
1950KGF), BODYLOOP: 30G/M (STRENGTH-ABOVE 950KGF), TIE TAPE: 6G/M
(STRENGTH-ABOVE 150KGF), SEWING THREAD USEDIN PANEL ATTACHMENT:
3300 DENIER (STRENGTH-ABOVE 20KGF), SEWING THREAD USED IN LOOP
ATTACHMENT: (1000 DENIER/2PLAY (STRENGTH-ABOVE 15KGF).
ADDITIVE DRILLING FLUID; FINE CRYSTAL FORM,SODIUM BROMIDE,FOR SODIUM
BROMIDE IS AN INORGANIC COMPOUND THAT IS USED TO PREPARE DENSE
CLEAR FLUIDS FOR USE IN DRILLING, COMPLETION OR WORK&#8208 GAS WELLS.
SODIUM BROMIDE (NaBr) WHITE R OF OIL OR,SODIUM BROMIDE,PP WOVEN BAG WITH PE LINER
CRYSTALS
INSIDE,APPEARANCE: WHITE FINE CRYSTAL,CONTAINER MUST BE PROPERLY
LABELED WITH VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION,
PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO WILL CARRY OUT
PROPER SAMPLING AND TESTING AS NEEDED.
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000840600
1000847074
70
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
200
201
202
203
Category
Chemicals
(Drilling Fluids)
Chemicals
(Drilling Fluids)
Static Equipment
(Heat Transfer)
Static Equipment
(Heat Transfer)
Material Description
Material Long Description
Material Number
9COM/9CAT
POWDER PHPA
ADDITIVE DRILLING FLUID; POWDER FORM,HIGH-MOLECULAR WEIGHT PARTIALLYHYDROLYZED POLYACRYLAMIDE (PHPA),FOR IT PROVIDES BOREHOLE STABILITY
AND REDUCES FRICTION IN SENSITIVE SHALE SECTIONS. IT, ALSO, ACTS AS A
FILTRATION CONTROL AND INCREASES VISCOSITY IN WATER-BASED DRILLING
FLUIDS.,PARTIALLY-HYDROLYZED POLYACRYLAMIDE (PHPA),BAG,APPEARANCE:
GRANULAR WHITE SOLID POLYMER. SOLUBILITY I,CONTAINER MUST BE
PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURER'S NAME,
LOCATION, PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO WILL
CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED.
1000866365
ADDITIVE DRILLING FLUID; POWDER FORM,ORGANOPHILIC CLAY,FOR PROVIDES A
RAPID YIELD UNDER LOW-SHEAR AND LOW-TEMPERATURE CONDITION AND
DEVELOPS THE MAXIMUM RHEOLOGICAL PROPERTIES SHORTLY AFTER BEING
MIXED. IT MORE EFFECTIVE IN ALL-OIL FLUIDS THAN STANDARD ORGANOPHILIC
CLAYS,ORGANOPHILIC CLAY,BAG,APPEARANCE: POLYMER RELATIVE DENSITY: 1.7
@ 20 SOLUBILITY IN WATER: INSOLU.
EJECTOR; AIR,STEAM OR WATER.,AIR, STEAM OR WATER.
ORGANOPHILIC CLAY
EJECTOR; AIR; STEAM OR
WATER.;
HEAT EXCHANGER; ELECTRIC; 32- HEAT EXCHANGER; ELECTRIC TYPE,32-SAMSS-027
SAMSS-027;
FLARE; PROCESSED PLANT TYPE,32-SAMSS-022,31-SAMSS-003 32-SAMSS-004,32SAMSS-011 32-SAMSS-013,34-SAMSS-830 34-SAMSS-711,INCLUDING
TEMPERATURE CONTROLS,IGNITERS AND STACK AND BURNPIT WITH
ACCESSORIES, FOR FGRS INCLUDES: COMPRESSORS. PRESSURE VESSELS(WATER
FLARE; PROCESSED PLANT;
SEAL DRUMS) OR CONTROL VALVES WITH BUCKING PIN VALVES, BLOWERS AND
INCLUDING TEMPER
AIR COOLED HEAT EXCHANGERS. FOR IN-HOUSE HPAAS (HIGH PRESSURE AIR
ASSIST SYSTEM) FLARE SMOKELESS APPLICATION INCLUDE: HPAAS FLARE TIP,
COMPRESSORS, PRESSURE VESSELS(AIR DRYER AND RECEIVER DRUM), CONTROL
VALVES AND HEAT EXCHANGERS.
204
Static Equipment
(Heat Transfer )
205
Static Equipment
206
Static Equipment
(Heat Transfer)
CONDENSER; SURFACE STEAM
SYSTEM;
BURNER; HIGH INTENSITY, FOR
SULFUR
207
Static Equipment
SKID; THERMAL OXIDIZER
208
Static Equipment
(Fittings)
SLEEVE; PIPE; TWO HALVES;
BOLTED FLANGED
2015
CONDENSER; SURFACE STEAM SYSTEM TYPE,32-SAMSS-007,CONDENSER SYSTEM
TYPE, COMPLETE WITH EJECTORS & EXCHANGER FACE STEAM
BURNER; HIGH INTERSITY TYPE,HIGH INTERSITY,FOR SULFUR RECOVER UNIT
REACTION FURNACE
SKID; THERMAL OXIDIZER TYPE,WITH RE-BOILER
SLEEVE PIPE BOLTED; STEEL,FOR PIPE REPAIR,FOR PIPE REPAIR
Saudi Aramco: Company General Use
1000866368
6000002415
6000002436
6000002508
6000002534
6000011229
6000011955
6000000134
71
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
209
210
Category
Static Equipment
(Fittings)
Static Equipment
(Fittings)
211
Static Equipment
(Fittings)
212
Static Equipment
(Fittings)
213
214
Static Equipment
(Fittings)
Static Equipment
(Fittings)
215
Static Equipment
(Fittings)
216
Static Equipment
(Heat Transfer )
217
Static Equipment
(Valves)
218
Static Equipment
(Valves)
219
Static Equipment
(Valves)
220
Static Equipment
(Valves)
221
Static Equipment
(Valves)
2015
Material Description
Material Long Description
FLANGE; BLIND; COPPER-ALLOY, FLANGE BLIND NON-KHUFF; FLANGE COPPER-ALLOY, EEMUA 145 ND
EEMUA 145;
FLANGE; PIPE; COPPER NICKEL, FLANGE PIPE; ALL DESIGNS TYPE,EEMUA 145,EEMUA 145,COPPER-ALLOY
EEMUA 145
FLANGES AND CS BACKING (LAP JOINT) FLANGES PER EEMUA
FLANGE PIPE; COMPACT FLANGE WN PAIR, WN-BLIND, WN-WN SWIVEL-RING OR
FLANGE; COMPACT WN PAIR, M- AS DESIGNED TYPE,ASME CLASS 900 AND ABOVE SUPPLY,WN WITH SELFENERGIZING SEAL TERMINAL,ANY STEEL PER 02-SAMSS-011,ASME SEC VIII
F CONNECTOR
DESIGN,02-SAMSS-011,COMPLETE ASSEMBLY WITH MALE-FEMALE CONNECTOR,
SEAL RING, BOLTS AND NUTS
TRAP STEAM; FLOAT, BALL TYPE,FLANGED, THREADED, SOCKET INLET,FLANGED,
THREADED, SOCKET OUTLET,PR PISG,PISG INLET,LB/HR CONDENSA,DEG F (DEG
TRAP: STEAM; MECHANICAL C0) OPERATIN,ASTM BODY,ASTM TRIM,ASTM STRAINER,ASTM
ELEMENT,FLOAT,BALL,OTHER STANDARD EQUIVALENT MAY BE SHOWN
FLANGE BLIND; EPOXY, POLYESTER, VINYL ESTER RESIN,01-SAMSS-034,SAES-S-040
SAES-S-070
FLANGE: BLIND, EPOXY RESIN, 01- FLANGE BLIND; EPOXY RESIN,01-SAMSS-034
SAMSS-034
FITTING: PIPE; CUNI PIPE FITTINGS, ALL TYPES, EEMUA 146 INCLUDING ELBOWS,
FITTING; PIPE; CUNI;ALL
TEES, REDUCERS, CAPS, COUPLING, BRANCH CONNECTION, BW OR SW OR
TYPES;EEMUA 146
THREADED AS PER EEMUA 146. NON-HYDRCARBON UTILITY.
HOSE: CORRUGATED METALLIC HOSE; ISO 10380,CORRUGATED METALLIC HOSE ASSEMBLIES
ASSEMBLIES
VALVE GATE; PARALLEL SLIDE TYPE,SIZE NPS 2 AND UP,ASME CL 150 AND UP
VALVE; GATE; PARALLEL SLIDE; 2
SUPPLY,FLANGED OR BUTTWELD END CONN,STEEL BODY,04-SAMSS-035,04INCH AND
SAMSS-048 04-SAMSS-001,WITH OR WITHOUT ACTUATOR
VALVE GATE THRU CONDUIT; SIZE NPS 2 AND UP,ASME CL 150 AND UP
VALVE; GATE; THRU
SUPPLY,FLANGED OR BUTTWELD END CONN,STYLE EXPANDING GATE,STEEL
CONDUIT;EXPANDING GATE
BODY,04-SAMSS-050,WITH OR WITHOUT ACTUATOR
VALVE GATE; SIZE UP TO NPS 12,ANY RATING, ALLENDS SUPPLY,NON-FERROUS,
VALVE; GATE; UP TO 12 INCH;
(BRONZE/ALUMINUM-BRONZE BODY,04-SAMSS-035,04-SAMSS-048 04-SAMSSNON-FERROUS;
001,WITH OR WITHOUT ACTUATOR
VALVE PLUG; EXPANDING TYPE,SIZE ANY SIZE,ANY PRESSURE RATING
VALVE; PLUG; EXPANDING;04SUPPLY,STEEL BODY,04-SAMSS-041,04-SAMSS-035 04-SAMSS-048,WITH OR
SAMSS-041;
WITHOUT ACTUATOR
VALVE PLUG; NON-LUBRICATED TYPE,SIZE ANY SIZE,ANY PRESSURE RATING
VALVE; PLUG; NON-LUBRICATED SUPPLY,STEEL OR DUCTILE IRON BODY,04-SAMSS-035,04-SAMSS-048 API
599,ASME B16.34,WITH OR WITHOUT ACTUATOR
FLANGE; NON-METALIC BLIND
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
6000000180
6000000181
6000000188
6000000196
6000000225
6000011660
6000014202
6000015210
6000000286
6000000290
6000000292
6000000307
6000000309
72
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
222
Static Equipment
(Valves)
223
Static Equipment
(Valves)
224
225
Static Equipment
(Valves)
Static Equipment
(Valves)
Material Description
Material Long Description
VALVE CHOKE; NEEDLE AND SEAT TYPE,1-13/16 IN & UP BODY,PR 10000
VALVE: CHOKE; API 6A, 10000 PSI PSI,HUBBED, FLANGED OR BUTTWELD END CONN,MR API 6A,STEEL BODY,04SAMSS-049,04-SAMSS-035 04,WITH OR WITHOUT ACTUATOR
VALVE CHECK; SIZE 2 THRU 24 INCH,ANSI CL 150 AND UP SUPPLY,STEEL
VALVE; CHECK; 2 THRU 24 IN;
BODY,SWING,REGULAR,FLANGED OR BUTTWELD END CONN,METAL OR SOFT
SOFT SEAT
SEAT,04-SAMSS-005,04-SAMSS-035
VALVE; HYDRANT PIT TYPE,SIZE ALL SIZES,ALL RATINGS SUPPLY,FOR JET FUEL,
VALVE: HYDRANT PIT, JET FUEL
CONTACT CSD FOR DETAILS.
VALVE; GATE, GLOBE&CHECK, VALVE GATE; GLOBE&CHECK, CRYOGENIC TYPE,SIZE ANY SIZE,ANY RATING
CRYOGENIC
SUPPLY,04-SAMSS-035,04-SAMSS-048,GLOBE,CHECK CRYOGENIC
VALVE PLUG; LUBRICATED TYPE,FULL BORE BORE,STEEL BODY,04-SAMSS-035,04VALVE; PLUG; Full Opening
SAMSS-048 API 599 AND ASME B16,FULL BORE TO ALLOW FOR THE PASSAGE OF
LUBRICATED
SCRAPERS WITH OR WITHOUT ACTUATOR
VALVE BALL; ANSI CL 150 AND UP SUPPLY,FLANGED OR BUTTWELD END
VALVE, BALL; HIGH
CONN,STYLE SPLIT BODY,SEAT SUPPORTED SUPPORT,METAL SEATED SEAT,04PERFORMANCE STEEL
SAMSS-035,04-SAMSS-048 04-SAMSS-051,HIGH PERFORMANCE STEEL AND ZERO
LEAKAGE, WITH OR WITHOUT ACTUATOR
VALVE BUTTERFLY; HIGH PERFORMANCE TYPE,TRICENTRIC,CL 150 AND UP
SUPPLY,FLANGED OR BUTTWELD END CONN,04-SAMSS-035,04-SAMSS-048 API
VALVE;BUTTERFLY; TRICENTRIC
6D,API 609,HIGH PERFORMANCE, ZERO LEAKAGE, WITH OR WITHOUT ACTUATOR
226
Static Equipment
(Valves)
227
Static Equipment
(Valves)
228
Static Equipment
(Valves)
229
Static Equipment
(Valves)
230
Static Equipment
(Valves)
VALVE; BLIND TYPE,SIZE NPS 2 THRU 24,ASME CLASS 150 AND UP
VALVE: BLIND; STEEL; FULL BORE;
SUPPLY,FLANGED END CONN,STEEL BODY,ASME SCE VII DIV 1, ASME B31.3,FULL
NPS
BORE, FOR NON- HYDROCARBON SEVICES
VALVE BALL; SIZE 1-13/16 IN AND UP,API 10000 SUPPLY,FLANGED OR BUTTWELD
VALVE: BALL;1-13/16 IN AND UP;
END CONN,STYLE SPLIT BODY,TRUNNION SUPPORT,METAL SEAT,04-SAMSS-049
API 10000
Static Equipment
(Vessels)
Static Equipment
(Process Vessels)
Static Equipment
(Process Vessels)
Static Equipment
(Tanks)
Static Equipment
(Tubes)
TANK; FIBER GLASS; 32-SAMSS002
SKID; NITROGEN GENERATION;
MEMBRANE TYPE
SKID; DRYER, INSTRUMENT AIR &
COMPRESSED
TANK;ROOF;FLOATING;INTERNAL
;32-SAMSS-005
DRIER, LIQUID, GAS AND
COMPRESSED AIR
231
232
233
234
235
2015
TANK; FIBER GLASS,32-SAMSS-002
SKID; MEMBRANE TYPE,32-SAMSS-038,NITROGEN GENERATION
SKID; DRYER TYPE,32-SAMSS-038,INSTURMENT AIR & COMPRESSED GAS
TANK; ROOF TYPE,32-SAMSS-005,ATING ERNAL
DRIER; LIQUID,GAS AND COMPRESSED AIR,LIQUID, GAS AND COMPRESSED AIR
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
6000000313
6000000326
6000004665
6000013010
6000013743
6000013744
6000013745
6000014054
6000014982
6000002481
6000002461
6000002879
6000011664
6000002414
73
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
Material Description
236
Static Equipment
(Tubes)
TUBE BUNDLE; TWISTED TUBE
TYPE, HEAT
237
Static Equipment
(HVAC)
238
239
240
Static Equipment
(HVAC)
Static Equipment
(HVAC)
Static Equipment
(HVAC)
241
Static Equipment
(HVAC)
242
Static Equipment
(HVAC)
243
Static Equipment
(HVAC)
244
Static Equipment
(HVAC)
245
Static Equipment
(HVAC)
246
Static Equipment
(HVAC)
247
Static Equipment
(HVAC)
248
Static Equipment
(HVAC)
249
Static Equipment
(HVAC)
250
Rotating Equipment
(Pump)
2015
Material Long Description
TUBE; 32-SAMSS-007
AIR HANDLING UNIT; AHU TYPE,CHILLED WATER OR DIRECT
EXPANSION,ONSHORE ALL SIZES AND OFFSHORE LESS THAN 10 TONS
COOLING,MANUFACTURER STANDARD
AIR CONDITIONING UNIT; SELF AIR CONDITIONING UNIT; SELF CONTAINED TYPE,(PACKAGED UNIT) CERTIFIED TO
CONTAINED; O
AHRI 340 AND UL 1995 STD
AIR CONDITIONING UNIT;
AIR CONDITIONING UNIT; PACKAGED UNIT TRAILERIZED TYPE,AIR COOLED,R-22
PACKAGED UNIT TRA
OR R-134A,MANUFACTURER STANDARD
HVAC; THROUGH THE WALL; AIR CONDITIONING UNIT; WINDOW TYPE,R-22 AND R-134A,AHRI-210/240 ULWINDOW UNIT
484,USE 9COM 6000001826 INSTEAD.
AIR CONDITIONING UNIT; AIR CONDITIONING UNIT SPLIT TYPE, LESS THAN 5.5
A/C Unit,mini-split,DE below 5.5
TON COOLING TONNAGE, DIRECT EXPANSION TYPE,AHRI 210/240,UL-1995
Tons
AIR HANDLING UNIT; AHU;
CHILLED WATER OR
CONDENSING UNIT; AIR COOLED; CONDENSING UNIT AIR COOLED; ONSHORE ALL SIZES AND OFFSHORE LESS THAN
ONSHORE ALL
10 TONS COOLING,MANUFACTURER STANDRADRS
CONTROLLER PROGRAMMABLE LOGIC; ENERGY MANAGEMENT SYSTEM:
CONTROLLER; PROGRAMMABLE
BUILDING
LOGIC; ENERGY M
AIR CONDITIONING UNIT; AIR CONDITIONING UNIT SPLIT UNIT DIRECT
A/C UNIT;SPLIT;DIRECT EXP,5.5
EXPANSION TYPE,SIZES 5.5 TO 63 COOLING TONNAGE COOLING,AHRI
TO 63 TONS
340/360,UL1995
AIR CONDITIONING UNIT; AIRCONDIONING AND PROCESS REFRIGERATION
AIR CONDITIONING UNIT;
SYSTEMS TYPE,ONSHORE ALL SIZES, OFFSHORE LESS THAN 10 TONS. COOLING,AB
AIRCONDIONING AND
REFRIGERATION SYSTEMS,EXPLOSION PROOF
CHILLER: HVAC/REFRIG, PACKGD CHILLER; HVAC/REFRIGERATION TYPE,PACKAGED RECIPROCATING, AIR COOLED,
RECIPROCTG,
FOR NON-PROCESS APPLICATIONS
AIR CONDITIONING UNIT; SPLIT TYPE,DIRECT EXPANSION,R-22 OR RAIR CONDITIONING UNIT; SPLIT 134A,PRECISION COOLING FOR CONTROL, COMMUNICATION, AND DATA
PROCESSING
AIR VOLUME BOX; VAR OR
BOX; AIR VOLUME, VARIABLE OR CONSTANT TYPE
CONST
CHILLER; ABSORPTION WATER COOLED DIRECT FIRED OR STEAM TYPE,AHRI
CHILLER: ABSORPTION; WATER
560,FOR HVAC APPLICATION. ABSORPTION WATER CHILLING AND WATER
COOLED
HEATING PACKAGES
DEVICE:HYDRAULIC POWER
TURBINE; HYDRAULIC TYPE,MFR STANDARD,POWER RECOVERY
RECOVERY, MFR STD
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
6000011344
6000001821
6000001822
6000001823
6000001825
6000001826
6000001831
6000001838
6000001862
6000001881
6000001884
6000013333
6000013335
6000012733
6000014646
74
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
251
Rotating Equipment
(Compressor)
252
Rotating Equipment
(Power Transmission)
253
254
255
256
257
258
259
260
261
262
263
264
265
266
2015
Material Description
Material Long Description
FILTER COMPLETE UNIT; SELF-CLEANING AIR FILTRATION SYSTEM, PULSE TYPE
FILTER: COMPLETE UNIT; SELFTYPE,FOR FOR 31-SAMSS-006 AIR CENTRIFUGAL COMPRESSORS,FILTER ELEMENTS
CLEANING
TO COMPLY WITH 32-SAMSS-016
COUPLING SHAFT; 13-SAMSS-001,API 613,FOR ROTATING EQUIPMENT, VARIABLE
COUPLING: VARIABLE SPEED, SPEED HYDRAULIC FLUID TYPE, WITH OR WITHOUT GEAR, WHEN GEAR ROTORS
HYDRAULIC
ARE USED, THE GEARS SHALL COMPLY TO 13-SAMSS-001/API 613.
Rotating Equipment COMPRESSOR; PROCESS; SCREW; COMPRESSOR PROCESS; SCREW TYPE,API-619,DRY, GAS APPLICATIONS
(Compressor)
DRY
ENGINE DIESEL; INDUSTRIAL TYPE,50 KW (67 HP ) OR GREATER BHP,30-SAMSSRotating Equipment
ENGINE; DIESEL; INDUSTRIAL 001
(Engine & Maint Eqpt)
Rotating Equipment
(Turbine, Gas)
Rotating Equipment
(Compressor)
Rotating Equipment
(Compressor)
Rotating Equipment
(Turbine, Gas)
Rotating Equipment
TURBINE: WIND, FOR POWER
GENERATOR
PUMP; VACUUM; API 681, HIGH
POWER
EXPANDER: TURBO, FOR
CRYOGENIC APPLICATI
FILTER; ELEMENT; COMBUSTION
GAS TURBINE;
TURBINE; WIND TYPE,IEC 61400,FOR POWER GENERATOR
PUMP; VACUUM TYPE,API 681,HIGH POWER, LIQUID RING VACUUM PUMPS OR
COMPRESSORS
EXPANDER; TURBO TYPE,API-617,7 EDITION,FOR CRYOGENIC APPLICATIONS IN
GAS REFRIGERATION AND AIR SEPARATION SERVICES
FILTER ELEMENT; FOR COMBUSTION GAS TURBINE,32-SAMSS-008,AIR INLET,
FINAL STAGE
ENGINE DIESEL; FIRE WATER PUMP DRIVER (PER UL 1247 OR FM 1333)
ENGINE: DIESEL, FIRE WATER
TYPE,EMERGENCY/STANDBY SERVICE CYCLE,PER UL 1247 OR FM1333 COOLED,30PUMP DRIVER
SAMSS-001,UL 1247,FM 1333,INSPECTION FORM 175-300100
EXPANDER: TURBO, FOR
EXPANDER; TURBO TYPE,API-617,7 EDITION,FOR CRYOGENIC APPLICATIONS IN
CRYOGENIC APPLICATI
GAS REFRIGERATION AND AIR SEPARATION SERVICES
TURBINE; HOT GAS EXPANSION TYPE,FOR DRIVING GAS COMPRESSOR OR
TURBINE; HOT GAS EXPANSION;
GENERATOR
COMPRESSOR; RECIPROCATING TYPE,FOR PLANT & INSTRUMENT AIR
COMPRESSOR; RECIPROCATING;
Rotating Equipment
(Compressor)
Rotating Equipment
(Turbine, Gas)
Rotating Equipment
(Compressor)
Rotating Equipment COMPRESSOR; PROCESS; SCREW;
(Compressor)
DRY
Rotating Equipment COMPRESSOR:PROCESS;CENTRIF
(Compressor)
UGAL;SEAL-LESS
Rotating Equipment
PUMP: ROTARY, GEAR, API 676
(Pump)
Rotating Equipment
PUMP: ROTARY, SCREW, API 676
(Pump)
COMPRESSOR PROCESS; SCREW TYPE,API-619,DRY, GAS APPLICATIONS
COMPRESSOR PROCESS; CENTRIFUGAL TYPE,31-SAMSS-001,API-617,SEAL-LESS,
GAS APPLICATIONS
PUMP ROTARY; GEAR TYPE,API-676
PUMP ROTARY; SCREW TYPE,API-676
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
6000013953
6000000722
6000002339
6000002198
6000015090
6000002365
6000010962
6000002417
6000016250
6000010962
6000002498
6000002246
6000002339
6000014055
6000002300
6000002303
75
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
267
268
269
270
271
272
273
274
275
276
277
278
Category
Material Description
Material Long Description
Rotating Equipment
PUMP: ROTARY, VANE, API 676
(Pump)
Rotating Equipment
PUMP; CENTRIFUGAL; SELF(Pump)
PRIMING; MFR STD
Rotating Equipment PUMP; CENT, INLINE, ASMEB73.2
(Pump)
OR ISO5199
Rotating Equipment
PUMP; CENTRIFUGAL;
(Pump)
FIREWATER;HORIZONTAL;
Rotating Equipment
PUMP: RECIPROCATING, 31(Pump)
SAMSS-009
Rotating Equipment PUMP; CENTRIFUGAL; MAGNETIC
(Pump)
DRIVE;HORIZO
PUMP;
Rotating Equipment
CENTRIFUGAL;VERTICAL;MOLTO
(Pump)
N SULFUR
Rotating Equipment
PUMP, CENTRIFUGAL,
(Pump)
HORIZONTAL, MOLTEN SU
Rotating Equipment
PUMP: MULTIPHASE, ROTARY,
(Pump)
API 676
Rotating Equipment PUMP: ROTARY, SCREW, API 676,
(Pump)
ASPHALT
PUMP; ROTARY; PROGRESSIVE
Rotating Equipment
CAVITY;
Rotating Equipment PUMP: CENTRIFUGAL; SEALLESS;
(Pump)
VERTICAL
PUMP CENTRIFUGAL; SELF-PRIMING TYPE
PUMP CENTRIFUGAL; INLINE TYPE,VERTICAL MTG,ASME B73.2 OR ISO 5199
PUMP CENTRIFUGAL; FIREWATER TYPE,HORIZONTAL MTG,NFPA 20,UL OR FM
APPROVED
PUMP RECIPROCATING; POSITIVE DISPLACEMENT, CONTROLLED VOLUME
TYPE,31-SAMSS-009
PUMP CENTRIFUGAL; MAGNETIC DRIVE TYPE,HORIZONTAL MTG,ASME B73.3M /
ISO15783
PUMP CENTRIFUGAL; VERTICAL TYPE,MFR STD DESIGN +SAES-G-005,MOLTEN
SULFUR, SUMP
PUMP CENTRIFUGAL; HORIZONTAL TYPE,MFR STD DESIGN +SAES-G-005,MOLTEN
SULFHUR
PUMP; MULTIPHASE, ROTARY, SCREW OR PROGRESSIVE TYPE,API 676
PUMP ROTARY; SCREW TYPE,API 676,ASPHALT SERVICE
PUMP ROTARY; PROGRESSIVE CAVITY TYPE,API 676
PUMP CENTRIFUGAL; SEALLESS TYPE,VERTICAL MTG,MFR STD
POLE LINE; POWER DISTRIBUTION TYPE,14-17 METERS LG,OCTAGONAL SHAPE
SHAPE,GALVANIZED STEEL,14-SAMSS-603,SINGLE PIECES 14-17 METERS IN
LENGTH, LONGER THAN 14 METERS MAY BE MANUFACTURED IN TWO PIECES,
SHALL BE PRE-DRILLED AND SUPPLIED COMPLETE WITH POLE TOP CAP AND BASE
PLATE.
BUS; CABLE,16-SAMSS-520
279
Electrical
POLE; LINE; POWER
DISTRIBUTION; STEEL;
280
Electrical
(Protective & Control
Electrical Devices )
CABLEBUS 16-SAMSS-520
281
Electrical
PANELBOARD,LOW VOLTAGE,
EXPLOSIONPROOF
282
Electrical
(Switchgear)
BUS; ISOLATED PHASE BUS DUCT
2015
PUMP ROTARY; VANE TYPE,API-676
Material Number
9COM/9CAT
6000002304
6000002342
6000002351
6000002355
6000002361
6000002366
6000002371
6000008842
6000010365
6000012249
6000002363
6000014690
6000000771
6000000929
PANELBOARD ELECTRICAL; LOW VOLTAGE, EXPLOSIONPROOF TYPE,16-SAMSS518
BUS; 16-SAMSS-523,ISOLATED PHASE BUS DUCT
Saudi Aramco: Company General Use
6000000897
6000015923
76
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
283
284
Category
Material Description
Electrical
(Solar Energy)
Electrical
(Cathodic Protection Above Grade
Equipment)
INVERTER, SOLAR POWER,
PHOTOVOLTAIC
Material Long Description
INVERTER; PHOTOVOLTAIC SOLAR TYPE,AA GRID CONNECTION
CABLE ELECTRICAL; ORED HODIC PROTECTION OFFSHORE TYPE,17-SAMSS017,ARMORED
CABLE;ELECTRICAL, CP,
OFFSHORE ANODE
Material Number
9COM/9CAT
6000014451
6000000957
285
Electrical
(Switchgear)
SWITCHGEAR; CONTROLGEAR,FIREWATER PUMP TYPE,UL-218,LOW
SWITCHGEAR; LV CONTROLGEAR,
VOLTAGE,OUTDOOR
FIREWATER PU
6000000919
286
Electrical
(Switchgear)
SWITCHGEAR; CONTROLGEAR,FIREWATER PUMP TYPE,UL-218,HIGH
SWITCHGEAR; HV
VOLTAGE,OUTDOOR
CONTROLGEAR, FIREWATER PU
6000000920
287
288
Electrical
(Cable Support)
Electrical
(Cathodic Protection Above Grade
Equipment)
POLE LINE; POWER
TRANSMISSION, 69 KV
POWER
SUPPLY;ELECTRICAL;SOLAR,CP
POLE LINE; POWER DISTRIBUTION TYPE,17 METERS AND UP LG,OCTAGONAL
SHAPE SHAPE,GALVANIZED STEEL,SEC
POWER SUPPLY ELECTRICAL; HODIC PROTECTION POWER PLY ELECTRICAL SOLAR
POWER TYPE,17-SAMSS-012
289
ANODE;GALVANIC,HIGH
TEMPERATURE ZINC,CP
290
Electrical
(Cathodic Protection Above Grade
Equipment)
CABLE; CP, FOR ONSHORE
ANODE
291
ANODE GALVANIC; MAGNESIUM,17-SAMSS-006,CATHODIC PROTECTION
Electrical
ANODE
WITHOUT LEADS
(Cathodic Protection GALVANIC;MAGNESIUM,WITHO
Below Grade or
UT LEAD,CP
Immersed Equip.)
293
2015
6000001011
ANODE GALVANIC; HIGH TEMPERATURE ZINC,17-SAMSS-006,CATHODIC
PROTECTION
Electrical
(Cathodic Protection Below Grade or
Immersed Equip.)
292
6000014870
6000015510
CABLE ELECTRICAL; STRANDED CONDUCTO,CATHODIC PROTECTION TYPE,FOR
FOR ONSHORE ANODE CONNECTION,,17-SAMSS-017
CABLE;
CABLE ELECTRICAL; CATHODIC PROTECTION TYPE,STRANDED, NEGATIVE &
Electrical
ELECTRICAL;OFFSHORE/ONSHOR POSITIVE TYPE,SINGLE INSULATED INSUL LV,HMWPE INSUL,FOR
(Cathodic Protection)
E,CP
OFFSHORE/ONSHORE,17-SAMSS-017
STATIC SWITCH, UPS
SWITCH; UPS APPLICATIONS,SOLID STATE STATIC TRANSFER TYPE,17-SAMSSElectrical
APPLICATIONS
516,EXTERNAL STAND-ALONE
Saudi Aramco: Company General Use
6000000938
6000001040
6000001045
6000001058
77
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
294
Electrical
(Cathodic Protection Below Grade or
Immersed Equip.)
295
Electrical
(Cathodic Protection Below Grade or
Immersed Equip.)
296
297
298
299
2015
Electrical
(Transformer, power
& distribution)
Material Description
Material Long Description
Material Number
9COM/9CAT
BOX: JUNCTION, FOR U/G
ANODE BED,CP
BOX ELECTRICAL; CATHODIC PROTECTION UNDERGROUND ANODE BED JUNCTION
BOX TYPE,SIZE 2500CM3 (MINIMUM),CYLINDRICAL OR BOX SHAPE,12X16MM2
AND 2X70MM2 CONNECTN,12+2 TERMINAL SCREW LUG COONECTN,FOR
WEATHERPROOF (DIRECT BURIAL),NON-CLASSIFIED,NON-METALLIC SUITABLE
FOR DIRECT BURIAL AND IMMERSION SERVICE IN AMBIENT TEMPERATURE
SEAWATER,OPTIONAL FINISH,OPTIONAL THK,17-SAMSS-008 'JUNCTION BOX FOR
CATHODIC PROTECTION',MEMBRANE GLANDS & FILLER/ SEALING COMPOUND
SUITABLE FOR DIRECT BURIAL AND IMMERSION SERVICE IN AMBIENT
TEMPERATURE SEAWATE
6000012080
ANODE GALVANIC; MAGNESIUM,17-SAMSS-006,CATHODIC PROTECTION LARGE
SIZE CYLINDRICAL, FOR OFFSHORE APPLICATION
ANODE: GALVANIC,
MAGNESIUM,CP
6000012790
UNIT; MOBILE SUBSTATION TYPE,60044,IEC60376, 60076,IEC60255,
60332,IEC60146, 60478,IEC60529, 60518,IEC60099, 62271,IEC60137,ALL
COMPONENTS DETAILS ARE BASED ON AND INSPECTED TO IEC STANDARDS.
OPERATING AT 230 KV, 115KV, OR 69KV CONSISTING OF: EIGHT (8) AXLES
SEMITRAILER , METAL OXIDE SURGE ARRESTERS, SWITCHGEAR, DISCONNECT
SWITCHES, CURRENT TRANSFORMERS AND AUXILIARIES, CAPACITIVE VOLTAGE
TRANSFORMER , POWER TRANSFORMER , AUXILIARY TRANSFORMER,
CONDITIONED CONTAINER, PROTECTION/ CONTROL PANELS, BATTERIES
EQUIPMENT, SCADA CAPABILITIES. ((COMPONENTS DETAILS AND REQUIREMENTS
SHOULD BE DETERMINED IN THE PURCHASE REQUEST.
UNIT; MOBILE SUBSTATION
Instrumentation and
VALVE: BACKFLOW PREVENTER;
IT
FOR INSTRUMEN
(Valve, Control)
Instrumentation and
MONITOR; WELL HEAD ESD;;
IT
MONITORING & CO
(Controller: HYD; ESD,
SSV & SSSV)
Instrumentation and
IT
ESD; RELAYS
(DCS, ESD & Plant
Control Systems)
6000015902
VALVE; BACKFLOW PREVENTER INSTRUMENT INSTALLATIONS
6000002680
MONITOR; WELL HEAD ESD, TYPE,WELL HEAD ESD,MONITORING & CONTROL
SYSTEMS
RELAY PROTECTION ELECTRO-MECHANICAL; 34-SAMSS-622,EMERGENCY
SHUTDOWN SYSTEM RELAY BASED USED TO SAFELY SHUTDOWN A PROCESS IN
CASE OF PROCESS DEVIATING TO HAZARDOUS OPERATING CONDITIONS.
Saudi Aramco: Company General Use
6000002721
6000002724
78
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
300
301
302
303
304
305
306
307
308
309
2015
Category
Material Description
Material Long Description
Instrumentation and
IT
ESD; ELECTRONIC; SOLID STATE
(DCS, ESD & Plant
Control Systems)
Instrumentation and
MONITOR; FLAME MONITORING
IT
SYSTEM
(Monitoring Eqpt
(Vibration, etc))
Instrumentation and
IT
FLOWMETER; THERMAL;
(Flow
Instrumentation)
Instrumentation and
NOZZLE; FLOW;
IT
Instrumentation and
FLOWMETER:FOR REDUCE
IT
PIPING REQUIREMENTS
(Flow
Instrumentation)
RELAY PROTECTION SOLID STATE; EMERGENCY SHUTDOWN SYSTEM ACTION,34SAMSS-621,SOLID STATE ELECTRONICS BASED USED TO SAFELY SHUTDOWN A
PROCESS IN CASE OF PROCESS DEVIATING TO HAZARDOUS OPERATING
CONDITIONS.
MONITOR; IGNITERS AND BURNERS USED E MONITORING SYSTEM D IN FIRED
EQUIPMENT. TYPE,34-SAMSS-617
Instrumentation and
IT
(Gauges, Indicators,
Recorders)
6000002725
6000002732
FLOWMETER; THERMAL TYPE,THERMAL
6000002736
NOZZLE; FLOW TYPE
FLOWMETER; 34-SAMSS-010,SPECIALTY FLOWMETER FOR REDUCING PIPING
REQUIREMENTS
INDICATOR SIGHT FLOW; GLASS
Instrumentation and
IT
INDICATOR; SIGHT FLOW; GLASS;
(Gauges, Indicators,
Recorders)
Instrumentation and
IT
(Instrumentation)
Instrumentation and
IT
(Analyzers,
Instrument)
Instrumentation and
IT
Material Number
9COM/9CAT
6000002740
6000002742
6000002744
MONITOR GAS; HYDROGEN SULFIDE,34-SAMSS-514
MONITOR; GAS; HYDROGEN
SULFIDE;
6000002786
INDICATOR; PRESSURE TYPE
MONITOR; GAS; COMBUSTIBLE;
OPEN PATH TYP
RECORDER; MULTI-POINT;
6000002787
RECORDER; MULTI-POINT TYPE
6000002807
SWITCH FLOW; FLOW TYPE, INSTRUMENTATION
SWITCH; TARGET
6000002831
Saudi Aramco: Company General Use
79
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
310
311
312
313
314
315
316
317
318
319
2015
Category
Material Description
Material Long Description
Instrumentation and
VALVE CHECK; LEVEL GAUGE GLASS, FLOW FLOW SHUT-OFF SPRING,LEVEL
VALVE; CHECK; LEVEL GAUGE GAUGE GLASS, FLOW SHUT-OFF
IT
GLASS; FLOW SH
(Valves,
Instrumentation)
Instrumentation and
VALVE; AUTOMATIC RECIRCULATION TYPE,34-SAMSS-711
VALVE; AUTOMATIC
IT
RECIRCULATION;
(Instrumentation)
Instrumentation and
VALVE RELIEF; SAES-J-605,SURGE GAS LOADED
VALVE; RELIEF; SURGE GAS
IT
LOADED
(Instrumentation)
Instrumentation and
ANALYZER; GAS CHROMATOGRAPH TYPE,34-SAMSS-511,PROCESS GAS OR LIQUID
ANALYZER; GAS
IT
CHROMATOGRAPH; Sheltered
(Instrumentation)
Instrumentation and
FLOWMETER; MULTIPHASE TYPE,34-SAMSS-001
FLOWMETER; MULTIPHASE;
IT
(MULTIPHASE FM)
Instrumentation and
CONTROLLER; COMPRESSOR/TURBOMACHINERY
CONTROLLER;
IT
TYPE,COMPRESSOR/TURBOMACHINERY,INEGRATED SYSTEMS
COMPRESSOR/TURBOMACHINER
(DCS, ESD & Plant
Y;
Control Systems)
Instrumentation and
CUSTODY METER, TURBINE,
FLOWMETER TURBINE; CUSTODY TRANSFER LIQUID TYPE,34-SAMSS-117
IT
LIQUID
Instrumentation and
FLOWMETER POSITIVE DISPLACEMENT; CUSTODY TRANSFER LIQUID TYPE,34IT
CUSTODY METER, POS DISPL , SAMSS-118
(Custody Transfer
LIQUID
Measurement
Equipment)
Instrumentation and
FLOWMETER CORIOLIS; CUSTODY TRANSFER LIQUID TYPE,CUSTODY TRANSFER
CUSTODY METER, CORIOLIS, LIQUID
IT
LIQUID
(Custody
Measurement)
Instrumentation and
FLOWMETER CORIOLIS; CUSTODY TRANSFER GAS TYPE
IT
CUSTODY METER, CORIOLIS GAS
(Custody
Measurement)
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
6000002854
6000002856
6000002896
6000002914
6000002917
6000009392
6000009831
6000009832
6000009833
6000009883
80
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
320
321
322
323
324
325
326
327
328
329
330
2015
Category
Instrumentation and
IT
(Custody Transfer
Measurement
Equipment)
Instrumentation and
IT
(Custody
Measurement)
Instrumentation and
IT
(Custody
Measurement)
Instrumentation and
IT
(Custody
Measurement)
Instrumentation and
IT
(Custody
Measurement)
Instrumentation and
IT
(Custody
Measurement)
Instrumentation and
IT
Instrumentation and
IT
Instrumentation and
IT
Instrumentation and
IT
Instrumentation and
IT
(Custody Transfer
Measurement
Equipment)
Material Description
Material Long Description
Material Number
9COM/9CAT
ORIFICE PLATE; CUSTODY TRANSFER GAS TYPE,34-SAMSS-112
ORIFICE PLATE FOR CUSTODY
TRANSFER
CUSTODY CHROMATOGRAPH,
GAS OR LIQUID
6000009887
CHROMATOGRAPH PROCESS; FOR CUSTODY TRANSFER CHROMOTOGRAPHY,34SAMSS-511
6000009898
COMPUTER FLOW; CUSTODY TRANSFER LIQUID TYPE,CUSTODY TRANSFER LIQUID
CUSTODY FLOW COMPUTER,
LIQUID, PANEL-MNT
6000009899
COMPUTER FLOW; CUSTODY TRANSFER GAS TYPE,CUSTODY TRANSFER GAS
CUSTODY FLOW COMPUTER,
GAS, PANEL-MNTD
6000009900
COMPUTER FLOW; CUSTODY TRANSFER LIQUID TYPE,CUSTODY TRANSFER LIQUID
CUSTODY FLOW COMPUTER,
LIQUID, FIELD-MNT
6000009901
COMPUTER FLOW; CUSTODY TRANSFER GAS TYPE,CUSTODY TRANSFER GAS
CUSTODY FLOW COMPUTER,
GAS, FIELD MOUNTD
CUSTODY PRESET CONTROLLER,
TRUCK LOADING
CUSTODY PRESET CONTROLLER
TRUCK UNLOADNG
Custody Tank Gauge, Radar
Custody Tank Management
System, Radar
6000009902
COMPUTER FLOW; CUSTODY PRESET CONTROLLER TYPE,34-SAMSS-847,FOR
TRUCK LOADING SYSTEMS
COMPUTER FLOW; CUSTODY PRESET CONTROLLER TYPE,34-SAMSS-847,FOR
TRUCK UNLOADING SYSTEMS
GAUGE TANK LEVEL; 34-SAMSS-321,CUSTODY TANK GAUGE, RADAR TYPE
COMPUTER; FOR CUSTODY TRANSFER,34-SAMSS-321,CUSTODY TANK
MANAGEMENT SYSTEM, RADAR
SCALE WEIGH; CUSTODY TRANSFER TYPE,CUSTODY TRANSFER
CUSTODY WEIGH SCALE
6000009906
6000009907
6000009908
6000009909
6000009910
Saudi Aramco: Company General Use
81
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
331
332
333
334
335
336
337
338
339
2015
Category
Material Description
Material Long Description
Instrumentation and
TETRA HANDHELD RADIO&DEVIS
IT
FOR CLASSIFID
(Communication,
Radio Equipment)
Instrumentation and
POWER SUPPLIES,FOUNDATION
IT
FIELDBUS (FF)
(Multivariable
Instrumentation)
DEVICE; TETRA HANDHELD RADIO AND DEVICES FOR CLASSIFIED AREA
TYPE,TETRA HANDHELD RADIOS & TETRA DEVICES USED IN HAZARDOUS OR
CLASSIFIED AREAS SUCH AS OIL & GAS PLANTS, REFINERIES, PIPELINES, ETC
Instrumentation and
IT
(Valves, Relief/Safety
& Busting Disks)
VALVE RELIEF; SAES-J-605,SURGE PILOT OPERATED TYPE.FACTORYTESTING IS
REQUIRED FOR COMPLEX RATE-OF-RISE OR MODULATINGVALVES.
VALVE, RELIEF; SURGE PILOT
OPERATED
POWER SUPPLY; FOUNDATION FIELDBUS (FF) TYPE,FOR USE WITH FOUNDATION
FIELD-BUS INSTRUMENTS ONLY
Instrumentation and
MULTIPLEXER; FOUNDATION FIELDBUS (FF) TYPE,SAES-J-904,AA MULTI-INPUT
Multiplexer; Foundation Fieldbus TEMPERATURE
IT
(FF)
(Temperature
Instrumentation)
CABINET; SAMSS-820 SAMSS-820,CABINETS FOR VIBRATION CABINETS FOR
Instrumentation and
VIBRATION MONITORING SYSTEMS (VMS MONITORING SYSTEMS (VMS
IT
CABINETS FOR VIBRATION
INTEGRATION) INTEGRATION) MONITOR; SAMSS-820 SAMSS-820,CABINETS FOR
(Monitoring Eqpt
MONITORING SYS
VIBRATION CABINETS FOR VIBRATION MONITORING SYSTEMS (VMS
(Vibration, etc))
MONITORING SYSTEMS (VMS INTEGRATION) INTEGRATION)
Instrumentation and
GAUGE TANK LEVEL; SAES-Y-301,34-SAMSS-321
CUSTODY TANK GAUGING
IT
SYSTEM, RADAR
(Custody
Measurement)
Instrumentation and
CABLE; SUBMARINE FIBER OPTIC CABLE TYPE,STAND-ALONE SUBMARINE FIBER
CABLE: SUBMARINE FIBER OPTIC OPTICAL CABLE,18-SAMSS-006
IT
(Communications)
Instrumentation and
ANALYZERS,GAS
ANALYZER; GAS CHROMATOGRAPH TYPE,34-SAMSS-511,IR343200,FIELD
IT
CHROMATOGRAPH; FIELD
MOUNTED
(Instrumentation)
MOUNT
Instrumentation and
DETECTOR LEAK; RTTM METHODS TYPE,FOR PIPELINE,SAES-Z-003,SYSTEMS USE
REAL-TIME TRANSIENT MODEL MATHEMATICAL MODELS OF THE FLOW WITHIN A PIPELINE TO DETECT THE LEAK
IT
PLDS
(DCS, ESD & Plant
Control Systems)
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
6000010102
6000010825
6000012803
6000013000
6000013781
6000014614
6000014631
6000014780
6000014890
82
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
340
341
342
Category
Material Description
Material Long Description
Instrumentation and
ACOUSTIC PRESSURE WAVES
IT
PLDS
(DCS, ESD & Plant
Control Systems)
Instrumentation and
BALANCING METHODS PRINCIPLE
IT
PLDS
(DCS, ESD & Plant
Control Systems)
Instrumentation and
SKID; WELLHEAD HIPS, SELFIT
CONTAINED
DETECTOR LEAK; BALANCING METHODS TYPE,FOR PIPELINE,SAES-Z-003,THESE
METHODS BASE ON THE PRINCIPLE OF CONSERVATION OF MASS
SKID; WELLHEAD HIPS TYPE,34-SAMSS-628,(HIGH INTEGRITY PRESSURE SYSTEM),
SELF-CONTAINED, WITH ALL RELATED COMPONENTS
COUPLING OCTG; HIGH NICKEL ALLOY STAINLESS STEEL,SEAMLESS,API-5CT,ISO13680,GR UNS N08020 OR EQUIVALENT,PREMIUM THREAD END CONN,COLLAPSE
COUPLING: OCTG; HIGH NICKEL
TEST PER API WITH ONE SAMPLE TESTED PER 200 JOINTS OF MOTHER TUBE
343
Pipe & OCTG
344
Pipe & OCTG
345
Pipe & OCTG
346
Pipe & OCTG
347
Pipe & OCTG
348
Pipe & OCTG
349
Pipe & OCTG
(OCTG)
COLLAR: DRILL; STANDARD
350
Pipe & OCTG
TUBING: OCTG; API GR;
SEAMLESS
351
Pipe & OCTG
(OCTG)
CASING: OCTG; API GR; ERW
2015
DETECTOR LEAK; ACOUSTIC PRESSURE WAVES TYPE,FOR PIPELINE,SAES-Z-003,THE
ACOUSTIC PRESSURE WAVE METHOD ANALYSES THE RAREFACTION WAVES
PRODUCED WHEN A LEAK OCCURS.
CASING OCTG; HIGH NICKEL ALLOY STAINLESS STEEL,SEAMLESS,API-5CT,ISO13680,GR UNS N08028 OR EQUIVALENT,PREMIUM THREAD END CONN,
COLLAPSE TEST PER API WITH ONE SAMPLE TESTED PER 200 JOINTS
CROSSOVER; OCTG, HIGH NICKEL ALLOY STAINLESS STEEL,SEAMLESS
TYPE,PREMIUM THREAD TERMINAL,API-5CT, ISO-13680,COLLAPSE TEST PER API
CROSSOVER: OCTG; HIGH NICKEL
WITH ONE SAMPLE TESTED PER 200 JOINTS OF MOTHER TUBE, GR UNS N08020
OR EQUIVALENT
PUP JOINT OCTG; HIGH NICKEL ALLOY STAINLESS STEEL,SEAMLESS,API-5CT,ISOPUP JOINT: CASING OCSG; HIGH 13680,GR UNS N08028 OR EQUIVALENT,PREMIUM THREAD END CONN,COLLAPSE
NICKEL
TEST PER API WITH ONE SAMPLE TESTED PER 200 JOINTS OF MOTHER TUBE
CASING: OCTG; HIGH NICKEL;
SEAMLESS
TUBING OCTG; HIGH NICKEL ALLOY STAINLESS STEEL,SEAMLESS,API-5CT,ISO13680,PREMIUM THREAD END CONN,COLLAPSE TEST PER API WITH ONE SAMPLE
TESTED PER 200 JOINTS OF MOTHER TUBE, UNS N08028
PUP JOINT OCTG; HIGH NICKEL ALLOY STAINLESS STEEL, TUBING,SEAMLESS,APIPUP JOINT: TUBING OCTG; HIGH 5CT,ISO-13680,GR UNS N08028,PREMIUM THREAD END CONN,COLLAPSE TEST
NICKEL
PER API WITH SAMPLE TESTED PER 200 JOINTS OF MOTHER TUBE,
TUBING: OCTG; HIGH NICKEL;
SEAMLESS
DRILL; SPIRAL/ SLICK TYPE,SIZE "3-1/8"" - 11"" OD",31 FEET LG,AISI 4145 H
MODIFIED,API-7
TUBING OCTG; STEEL,SEAMLESS,API-5C2,API-5B 45-SAMSS-006
CASING OCTG; STEEL,ERW OR SEAMLESS,AA 45-SAMSS-006,API-5L,SIZE 24 IN
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
6000014891
6000014892
6000015901
6000007293
6000007303
6000007305
6000007307
6000007350
6000007352
6000003831
6000003877
6000003851
83
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
352
353
354
355
356
357
Category
Pipe & OCTG
(OCTG)
Pipe & OCTG
(Pipe)
Pipe & OCTG
(Pipe)
Pipe & OCTG
(Pipe)
Pipe & OCTG
(Pipe)
Pipe & OCTG
(Pipe)
Material Description
CASING: OCTG; API GR; SAW
HEADER: PIPE; EXTRUDED OR
REINFORCED
PIPE: METALLIC, WELD
OVERLAYED PIPE
CUNI PIPE, EEMUA 144
PIPE;METALLIC; HFW CLASS C
FOR SOUR GAS
PIPE: METALLIC, LINED PIPE
PIPE; METALLIC; HFW CLASS B
FOR NON SOUR
Pipe; Nonmetallic, Subsea
flexible
358
Pipe & OCTG
359
Pipe & OCTG
(Pipe)
360
Pipe & OCTG
PIPE & FITTINGS;
THERMOPLASTIC;
361
Pipe & OCTG
(Pipe)
UMBILICAL SYS, SUBSEA,
OFFSHORE, NONMETA
362
Pipe & OCTG
363
Pipe & OCTG
364
Pipe & OCTG
365
Pipe & OCTG
(Pipe)
2015
Material Long Description
CASING OCTG; STEEL,SAW,45-SAMSS-006,API-5L,SIZE 26 IN. AND LARGER
HEADER PIPE; EXRUDED OR REINFORCED BRANCHES,ANY APPLICATION,ANY
APPLICATION
PIPE METALLIC; CARBON STEEL,OVERLAYED WITH CORROSION RESISTANT
ALLOY,01-SAMSS-048, API 5LD
PIPE; CUNI, EEMUA 144 TYPE
PIPE METALLIC; ALL SIZE NPS,STEEL,GR B THRU X-65,HFW,API 5L,01-SAMSS333,CLASS C,FOR SOUR GAS SERVICE ONSHORE
PIPE METALLIC; CARBON STEEL,LINED WITH CORROSION RESISTANT ALLOY,01SAMSS-048, API 5LD
PIPE METALLIC; ALL SIZE NPS,STEEL,GR GRADE B THRU X70,HFW,API 5L,01-SAMSS333,CLASS B,NON SOUR SERVICE
PIPE METALLIC; PA,PE & PVDF,FLEXIBLE PIPE,LINER AND OUTER SHEATHING,API
17J
PIPE NON-METALLIC; 1300 MM TO 3600 MM NPS,AA STRUCTURED
WALL,THERMOPLASTIC, HDPE, PVC, PP,FOR WATER, GRAVITY,DIN
16961,SEWERAGE, STORM WATER DRAIN, SEAWATER INTAKE AND OUTFALL
PIPE NON-METALLIC; 15-SAMSS-503,15-SAMSS-504 ISO 13628,UMBILICALSYSTEM
IS AN INTEGRATED BUNDLE OF TUBES, HOSES, POWER CABLESAND/OR FIBER
OPTICS ENCLOSED WITH AN OUTER RING SPECIALLYDESIGNED FOR THE SUBSEA
ENVIRONMENT TO WHICH IT WILL BE DEPLOYED.
PIPE; NON-METALLIC; ALL SIZES; PIPE NON-METALLIC; ALL SIZES NPS,THERMOPLASTIC, UPVC,ASTM D2665,ASTM
THERMOPLA
D1785
PIPE NON-METALLIC; MAXIMUM 8 INCHES NPS,REINFORCED THERMOPLASTIC
(RTP),INTERNAL / EXTERNAL LINING THERMOPLASTIC(PE,PE- RT, PP
Pipe; Nonmetallic, (RTP) PIPE PA,PVDF,PREFABRICATED SPOOL ENDS,FOR WATER AND HYDROCARBON
APPLICATIONS MAX TEMP 180 F,API RP 15S FOR FIBER,REINFO 17J FOR STEEL
REINFORCED,ONSHORE / OFFSHORE WATER AND HYDROCARBON APPLICATIONS.
GRATING FIBERGLASS; AB 12-SAMSS-021 AND 12-SAMSS-0
PIPE NON-METALLIC; MAXIMUM 30 IN. NPS,PER CALCULATION,REINFORCED
THERMOSETTING RESIN,REINFORCED THERMOSETTING RESIN,FOR WATER (NONPIPE&FITTINGS;NON-METAL;RTR UTILITY) AND HYDROCARBON APPLICATIONS MAX TEMP 210 F,01-SAMSS-042,API
RP 15HR API RP 15LR,FOR PIPE AND FITTINGS
GRATING; FIBERGLASS
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
6000003855
6000000060
6000014017
6000014200
6000000046
6000014016
6000000049
6000000037
6000011205
6000014895
6000000031
6000000042
6000000631
6000013160
84
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
366
Pipe & OCTG
367
Pipe & OCTG
(Pipe)
368
Pipe & OCTG
369
Pipe & OCTG
(Pipe)
370
Pipe & OCTG
(Pipe)
371
Pipe & OCTG
372
2015
Pipe & OCTG
Material Description
Material Long Description
GRATING; FIRE RETARDANT TYPE,PULTRUDED PHENOLIC RESIN,12-SAMSS023,NONMETALLIC FIBER-REINFORCED COMPOSITE PLATFORMS. ASTM E84
RESOLUTION A653 (16) D635 M M D2863. SHORE 94
PIPE NON-METALLIC; UP TO 20 NPS,300 PSIG MAX
PIPE; NON-METAL; LINED PIPING SUPPLY,CARBONSTEEL,THERMOPLASTIC LINED PIPING SYSTEMS,FOR CORROSIVE
SYSTEMS
FLUIDS,ACIDS, ALKALINE,CHEMICAL SOLUTIONS OR OILY DRAINS,01-SAMSS-025
Grating; Offshore; Fire
Retardant; Non-M
PIPE, NON-METALLIC, ALL SIZES, PIPE NON-METALLIC; ALL SIZES NPS,POLYPROPYLENE,ASTM F2389,FOR WATER
FOR WATER
DISTRBUTION SYSTEMS
SERVICE; PRE-ENGINEERED THERMOSET FIBER REINFORCED
COMPOSITETYPE,SAEP-345,ASME-PCC2 ISO 24817,LIMITED TO PIPELINE FOR
WATER,HYDROCARBON, AND CHEMICALS APPLICATIONS. SUITABLE FOR
PIPELINESWITH EXTERNAL CORROSION UP TO 80 PERCENT METAL LOSS. FOR
Service: Pre-Engineered
SABKHAAREA APPLICATIONS, AN EXTERNAL WATER PROTECTION LAYER SHALL
Composite Repair
BEADDED ON THE SLEEVE. NOT APPLICABLE FOR FITTINGS SUCH AS ELBOW,TEE,
REDUCER#.ETC. FOR PLANT PIPING, IT SHALL BE UTILIZED AS ATEMPORARY
REPAIR WITH A PRIOR APPROVAL FROM NONMETALLIC SCC.
SERVICE; WET-TYPE THERMOSET COMPOSITE FIBER REINFORCED
OMPOSITE.TYPE,SAEP-345,ASME-PCC2 ISO 24817,USE FOR WATER,
SERVICE: WET -TYPE COMPOSITE HYDROCARBON,CHEMICALS PLANT PIPING AND PIPELINES. SUITABLE FOR
REPAIR EXT.
EXTERNALCORROSION UP TO 80 PERCENT METAL LOSS. FOR PLANT PIPING
ANDFITTINGS, IT SHALL BE UTILIZED AS A TEMPORARY REPAIR WITH APRIOR
APPROVAL FROM NONMETALLIC SCC.
SERVICE; WET-TYPE THERMOSET COMPOSITE FIBER REINFORCED TYPE,SAEP345,ASME-PCC2 ISO 24817,USE FOR WATER, HYDROCARBON, CHEMICALS PLANT
SERVICE: WET-TYPE; COMPOSITE PIPING AND PIPELINES. SUITABLE FOR INTERNAL CORROSION UP TO 80 PERCENT
METAL LOSS PROVIDED THAT CORROSION SOURCE IS MITIGATED. FOR PLANT
REPAIR, INT
PIPING AND FITTINGS, IT SHALL BE UTILIZED AS A TEMPORARY REPAIR WITH A
PRIOR APPROVAL FROM NONMETALLIC SCC.
PIPE; PIPE, ANY SIZE TYPE,CHLORINATED POLY VINYL CHLORIDE (CPVC),UL OR
PIPE; NONMETALLIC; CPVC; FOR EQUIVALENT CERTIFIED FOR FIRE SPRINKLER SYSTEMS STANDARDS: UL 1887, UL
FIRE SPRINK
1821 ASTM D1784, ASTM F442, UL LISTED ADHESIVE, ASTM F493, ASTM F656
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
6000007813
6000013900
6000009750
6000014191
6000014681
6000015710
6000016271
85
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
373
Category
Drilling Equipment
(Downhole
Equipment)
374
Drilling Equipment
(Downhole
Equipment)
375
Drilling Equipment
(Downhole
Equipment)
376
Drilling Equipment
(Downhole
Equipment)
2015
Material Description
Material Long Description
Material Number
9COM/9CAT
KIT,9-5/8",VALVE+GRV
PACKER+SEAL+MFIV
VALVE; MECHANICAL FORMATION ISOLATION TYPE,SIZE 9-5/8 IN,5000PSI
(DIFFERENTIAL PRESSURE) SUPPLY,4140 L-80 BODY,4140 L-80TRIM, 4.562" ID X
8.000" OD (3 FT) EXTENSION, 5,000 PSI BALLDIFFERENTIAL PRESSURE RATING,
300 DEG. F TEMPERATURE RATING,5-1/2" 17 PPF NEW VAM BOX X PIN, AND 106"
OVERALL LENGTH, 1.COMPLETE ASSEMBLY WITH ITEMS AS DESCRIBED IN KITS
SECTION MUSTBE BOXED AS AN INDIVIDUAL UNIT FOR SHIPMENT AND STORAGE
PERSAUDI ARAMCO PACKAGING SPEC 844418. 2. MANUFACTURER MUST
BARCODE IDENTIFY EACH ISSUE UNIT ON BOTH THE MATERIAL AND OUTSIDETHE
CONTAINER IN WHICH THE ISSUE UNIT IS CONTAINED. CODE TO BEIN THE
INTERNATIONAL CODE 39 BAR CODING SYSTEM FORMAT AND ADHERETO ANSI
MH10.8 ( LATEST EDITION) SPECIFICATION (LESS SECTIONS 12& 13). BAR CODE
TAG MUST INCLUDE THE SAUDI ARAMCO STOCK NUMBERAND PURCHASE ORDER
NUMBER. ALL ITEMS SHOULD BE ASSEMBLEDTOGETHER PRIOR TO TESTING.KITS
COMPONENTS
1000809798
PACKER; MPAS KIT TYPE,4-1/2 IN, FOR 6-1/8 IN OHCONSIST OF:ITEM QUANTITY
DESCRIPTION01 01 Baker M-Pas Mech. External CasingPackerwith bottom
subSize: 4-1/2 IN. 11.6lb/ftThread connection: 4-1/2IN. 12.6# NewVamBox X
PACKER,ECP,4BoxElement O.D.: 5.625 IN.Tool I.D.: 3.500 IN.Material: L-80PART# H30158450802
1/2X6.1,NVAM,12.6#,MPAS,MEC 01 Baker Lift Nipples for Mpas PackersSize: 4-1/2 in. 11.6lb/ft, 6 feet longThread
Connection: New Vam Box X PinTool O.D.: 5.000 IN.Tool I.D.: 3.950 IN.Material: L80PART# H494079210
1000750621
KIT,LINER,9LINER; TOP PACKER ASSEMBLY TYPE,SIZE 9-5/8 IN 53.5 PPF X 14 IN114
5/8X14",VAM21,53.5#,CRA,MDS PPF,#CONNECTION : VAM 21.KIT COMPONENTS
K
PACKER: PRODUCTION, 5.687 IN OD, 3.720IN ID, FOR 7 IN, 32-35 LB/FT
CASINGPACKER PRODUCTION; "S-3" 1-TRIP HYDRO-SET COMP . PACKER
TYPE,FORH2S, CO2,WIRELINE OR HYDRAULIC SET ACTIVATI,5.879 IN OD,3.720
PACKER,PROD,7X4INID,7.000 IN OD,32-35 LB/FT,4-1/2 IN CONNECTN,13.5 LB/FT,VAM TOPHC PIN X
1/2,VTHC,13.5#CRMO,HYD
PIN COONECTN,10000 PSI SUPPLY,NACE MR-01-75,MATERIAL:PACKER: 125 KSI
MYS CR-MO LOW ALLOY STEEL PACKING ELEMENT: BPSAFLAS O-RINGS: BPS
AFLAS. TEMPERATURE RATING: 150-350 DEG F.KITS COMPONENTS
Saudi Aramco: Company General Use
1000835538
1000025107
86
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
377
378
2015
Category
Drilling Equipment
(Downhole
Equipment)
Drilling Equipment
(Downhole
Equipment)
Material Description
VALVE,ICV,31/2",EUE,CRA,7.5K,FCV-002
Material Long Description
VALVE; TUBING RETRIEVABLE FLOW CONTROL-HYDRAULIC TYPE,SIZE 3-1/2IN,31/2 IN 9.3 PPF EUE BOX X PIN END CONN,INC718 BODY,INC718,9CR-1MO,
4140/4130 TRIM,EXTERNAL WORKING PRESSUR: 7500 PSI,INTERNAL DIA.: 2.812
IN MIN, DRIFT ID: 2.808 IN, LENGTH: 219 IN,MAX FLOW RATE: 40000 BBL/DAY,
MAX WORKING TEMP.: 325°F, MINWORKING TEMP.: 40°F, MAJOR OD: 5.850 IN,
SEAL BORE SIZE: 2.812IN, NO. OF BYPASS CONTROL LINES: 4. THE TUBING
RETRIEVABLE FLOWCONTROLLER SYSTEM MUST PROVIDE REMOTELY ACTUATED
DOWNHOLECONTROL OF FLOW FROM THE RESERVOIR. THE SYSTEM MUST BE
OPERATEDBY A 0.25-IN HYDRAULIC CONTROL LINE THAT IS ROUTED FROM
THESURFACE CONTROLS TO THE CHOKE SECTION OF THE TOOL.
LINER; CEMENTED, KIT TYPE,4-1/2 IN BOTTOM CEMENTING KIT. FOR 7IN 26 #
CASING AND 6-1/8 IN OPEN HOLECONSIST OF:ITEM QUANTITY DESCRIPTION01 01
Baker #PBR# Style Locator SealAssemblySize: 5.250 IN. X 4-1/2 IN. 11.6lb/ftThread
connection: New Vam Box Up x ½MulshoeLength: 10ft effective Seal
StrokeMaterial: L-80PART# H29755079802 01 Baker Hyflo III Liner Top PackerSize:
5 IN. 18b/ft X 7 IN. 23-29Lb/ftThread: 5 IN. 18lb/ft New Vam Box DownMaterial: L80Extension ID: 5-1/4 IN.Tool OD: 6.050 IN.Tool ID: 4.276 IN.Extension Length: 10
feetPART# H29618006603 01 Model #HMC# Liner HangerSize: 4-1/2 IN. X 7 IN. 2326#/ftMaterial: BMS # A099Threads: 4-1/2 IN. 12.6#/FT New VamMinimum ID:
4.000 IN.Max OD: 6.000 IN.PART# H292230110Including following items:Flapper
Valve Assembly/Cross OverPART# H282050540Plug Holder BushingPART#
H299940415ITEM QUATITY DESCRIPTION04 01 Baker#PAC# ValveSize: 4-1/2IN. X
KIT,LINER,41/2X7",NVAM,12.6#,CEMENTED 12.6 ppfThread: New VamMaterial: L-80Pressure: Field Adjustable, 20003500Temp. Rating: 325 deg.PART# H30112240805 02 Baker #Isozone# External
Casing PackerWith Standard ValveSize: 4-1/2 IN. 12.6 lb/ft.Thread Connection: 41/2 IN. 12.6# NewVam Box X PinElement O.D.: 5.625 IN.Tool I.D.: 3.821
IN.Material: L-80Elastomer Length: 7 ft.PART# H30139241606 01 Baker Landing
CollarSize: 4-1/2 IN. X 12.6 ppfThread: New VamMaterial: L-80O.D.: 4.891 IN.I.D.:
3.937 IN.Seat I.D.: 1.500 IN.PART# H26679007307 01 Liner Wiper plug for PAC
valveNitrile, 4.500 IN. OD 9.500-11.60lb/ftCasing, 4.125 IN.SHAER TAB, 3.678
IN.Stabilizer OD. 1.641 IN. tool IDF/1.812PART# H26932002208 01 Baker Pump
Down PlugSize: 1.844 IN. Nose O.D.Material: NitrileO.D.: 5.130 IN.Max Csg I.D.:
2.00 IN.Max Pressure: 3000 psi @ 350 deg. FPART# H270200056
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000782175
1000750589
87
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
379
Drilling Equipment
(Downhole
Equipment)
380
Drilling Equipment
(Advanced Well
Completion
Equipment)
381
Drilling Equipment
(Downhole
Equipment)
HANGER,LINER,7X95/8,VTHC,32#,718,HYD
382
Drilling Equipment
(Downhole
Equipment)
PACKER,PROD,7X41/2,NVAM,12.6#,ALLOY,RET
383
Drilling Equipment
(Advanced Well
Completion
Equipment)
ICD-SCREEN,41/2,NVAM,11.6#,0.014,SNDST
384
Drilling Equipment
(Downhole
Equipment)
2015
Material Description
Material Long Description
HANGER LINER; HYDRAULIC CONTROL SET FLEX-LOCK TYPE IIIACTIVATI,7 IN END
1,32 PPF END 1,9-5/8 IN END 2,47-58.4 PPF END2,VAM TOP HC PIN X PIN END
CONN,CONTROL SET FLEX-LOK LINERHANGER WITH ZXP TOP PACKER
ASSEMBLY.KIT COMPONENTS
SCREEN; RESFLOW INFLOW CONTROL DEVICE (ICD) TYPE,SIZE 4-1/2 IN X40 FT
LG,SS316L,FOR STANDSTONE INSTALLATION, BASE PIPE MATERIAL:L-80, PIPE SIZE:
4-1/2 IN, 12.6 LB/FT, THREAD CONNECTION: NEWVAM, WEIGHT: 17.57 LB/FT,
DISPLACEMENT: 0.35 GAL/FT, AXIAL RODPROFILE: 4.0 X 3.0 MM, NO. OF RODS:
ICD-SCREEN,41/2,NVAM,12.6#,250MC,SNDST 28, WRAP WIRE PROFILE: 4.0 X3.0 MM, SCREEN (WRAPPED) INFLOW AREA:
7.69%, SLOT OPENING: 250MICRONS/0.010 IN, CENTRALIZER PER LOCATION:
ONE/JT @ PIN END,NO. OF STOP COLLARS: TWO/CENTRALIZERS, NOZZLE
DIAMETER: 4 MM,NUMBER OF NOZZLES: 4 PER JOINT.
HANGER,LINER,7X95/8,VTHC,32#,110,HYD
HANGER LINER; 7 IN END 1,32 PPF END 1,9-5/8 IN END 2,53.5-58.4 PPF END
2,CORROSION RESISTANT ALLOY MATERIAL, SYSTEM INCLUDES 1/2 IN MULESHOE, WIRELINE ENTRY GUIDE KIT COMPONENTS
PACKER PRODUCTION; VHR, HYDRAULIC SET RETRIEVABLE TYPE,FOR
H2S,CO2,HYDRAULIC SET ACTIVATI,6.000 IN MAX OD,3.880 IN MIN ID,7 INOD,2329 LB/FT,5.250-6RTH-LTH LEFT HAND (TOP) X 4-1/2 IN 12.6#NEW VAM BOX
(BOTTOM) CONNECTN,12.6 LB/FT (BOTTOM),LEFT-HAND(TOP), NEW VAM BOX
(DOWN) COONECTN,6,000 PSI SUPPLY,NACEMR0175,AFLAS ELEMENT AND
VITON/AFLAS O-RINGSKIT COMPONENTS
SCREEN; RESFLOW INFLOW CONTROL DEVICE (ICD) TYPE,SIZE 4-1/2 IN X40 FT
LG,SS 316L,FOR SANDSTONE INSTALLATION, BASE PIPE MAT'L:L-80, PIPE SIZE: 41/2 IN 11.6 LB/FT, THREAD CONNECTION: NEWVAM, WEIGHT: 15.46 LB/FT,
DISPLACEMENT: 0.31 GAL/FT, AXIAL RODPROFILE: 6.2 X 3.2 MM, NO OF RODS: 28,
WRAP WIRE PROFILE: 4.0 X3.0 MM, SCREEN (WRAPPED) INFLOW AREA: 10.45%,
SLOT OPENING: 350MICRONS/0.014 IN, CENTRALIZER PER LOCATRION: ONE/JT @
PIN END,NO OF STOP COLLARS: TWO/CENTRALIZERS, NOZZLE DIA: 4MM, NO
OFNOZZLES: 4 PER JOINT
PACKER PRODUCTION; STAGE FRAC SET UP ASSEMBLY TYPE,5.625 INOD,3.375 IN
ID,7 IN OD,32-35 LB/FT,4-1/2 IN CONNECTN,13.5LB/FT,VAM TOP HC BOX X PIN
KIT,FRAC,41/2X5.875"OH,VTHC,13.5#,PK-SL COONECTN,10,000 PSI WORKING PRESSURESUPPLY,OPEN HOLE SIZE: 5-7/8 IN,
MATERIAL: P-110.KITS COMPONENTS:
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000889169
1000778420
1000815460
1000764262
1000790538
1000835551
88
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
Material Description
Material Long Description
385
Drilling Equipment
(Advanced Well
Completion
Equipment)
ICD-SCREEN,51/2,NVAM,17#,350MC,SNDST
386
Drilling Equipment
(Downhole
Equipment)
PIPE,5-1/2",XPC,18.24#,EX80,37FT,EXPAND
387
Drilling Equipment
(Downhole
Equipment)
CONNECTOR,HYD,4-1/2,WET
MATE,2PORT,HNBR
2015
SCREEN; RESFLOW INFLOW CONTROL DEVICE (ICD) TYPE,SIZE 5-1/2 IN X 40 FT
LG,SS316,FOR SANDSTONE INSTALLATION, BASE PIPE MATERIAL: L-80, PIPE SIZE:
5-1/2 IN 17.0 LB/FT, THREAD CONNECTION: NEW VAM, WEIGHT: 21.78 LB/FT,
DISPLACEMENT: 0.42 GAL/FT, AXIAL ROD PROFILE: 4.0 X 3.0 MM, NO OF RODS:
32, WRAP WIRE PROFILE: 4.0 X 3.0 MM, SCREEN (WRAPPED) INFLOW AREA:
9.78%, SLOT OPENING: 350 MICRONS/0.009 IN, CENTRALIZER PER LOCATION:
ONE/JT @ PIN END, NO OF STOP COLLARS: TWO/CENTRALIZERS, NOZZLE
DIAMETER: 4 MM, NO OF NOZZLES: 4 PER JOINT
JOINT; SOLID EXPANDABLE LINER TYPE,SIZE 5-1/2 IN 18.24 PPF X 7 IN 26 PPF,EX80,COUPLED WITH CONNECTION SLEEVE, CONNECTION: ENVENTURE
PROPRIETARY XPC PIN X BOX LH, LENGTH: 37 FT
ELEMENT; HYDRAULIC LINE TYPE,SIZE 4-1/2 IN,4140 (L-80),WET MATECONNECT
SYSTEMKITS COMPONENTS 4-1/2 IN HYDRAULIC LINE WET MATECONNECT
SYSTEM CONSISTS OF:ITEM QTY DESCRIPTION01 01 4-1/2" x 9-5/8" HLWM
RECEPTACLE ASSEMBLYMATERIAL: 4140GRADE: L-80WEGHT (APPROX): 600
LBSEXT. WP @ TEMP: 6000 PSI @ 250 DEG FID: 3.958 INID (MIN): 3.943 ININT.
WP @ TEMP: 6000 PSI @ 250 DEG FLOWER THREAD: 4.5-8RD,12.2 PPF, EUE,
PINMAKEUP LENGTH: NAMATERIAL/ELASTOMERS: HNBRMAX. WORKING TEMP:
250 DEG FMIN. WORKING TEMP: 40 DEG FOD: 8.369 INOD (MAX): 8.379
INOVERALL LENGTH: 72 INSERVICE NACE: NOTENSILE STRENGTH: 250,000 LBS @
250 DEG FUPPER THREAD: NAPART NUMBER: 10051791AB02 01 4-1/2" x 9-5/8"
STINGER ASSEMBLYMATERIAL: 4140GRADE: L-80WEGHT (APPROX): 500 LBSEXT.
WP @ TEMP: 6000 PSI @ 250 DEG FID: 3.750 INID (MIN): 3.745 ININT. WP @
TEMP: 6000 PSI @ 250 DEG FLOWER THREAD: NAMAKEUP LENGTH:
NAMATERIAL/ELASTOMERS: HNBRMAX. WORKING TEMP: 250 DEG FMIN.
WORKING TEMP: 60 DEG FOD: 8.369 INOD (MAX): 8.379 INOVERALL LENGTH: 135
INSERVICE NACE: NOTENSILE STRENGTH: 250,000 LBS @ 250 DEG FUPPER
THREAD: 4.5-8RD, 12.2 PPF,EUE, BOX.PART NUMBER: 10051785AB
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000788091
1000819339
1000839903
89
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
388
Category
Drilling Equipment
(Downhole
Equipment)
389
Drilling Equipment
(Downhole
Equipment)
390
Drilling Equipment
(Advanced Well
Completion
Equipment)
391
Drilling Equipment
(Advanced Well
Completion
Equipment)
2015
Material Description
Material Long Description
Material Number
9COM/9CAT
KIT,7",VALVE+GRV
PACKER+SEAL+MFIV
VALVE; MECHANICAL FORMATION ISOLATION TYPE,SIZE 7 IN,5000
PSI(DIFFERENTIAL PRESSURE) SUPPLY,4140 L-80 BODY,4140 L-80TRIM,2.940" ID X
5.500" OD (3 FT) EXTENSION, 5,000 PSI BALLDIFFERENTIAL PRESSURE RATING,
300 DEG. F TEMPERATURE RATING,4-1/2" 13.5 PPF NEW VAM BOX X PIN, AND
106" OVERALL LENGTH, 1.COMPLETE ASSEMBLY WITH ITEMS AS DESCRIBED IN
KITS SECTION MUSTBE BOXED AS AN INDIVIDUAL UNIT FOR SHIPMENT AND
STORAGE PERSAUDI ARAMCO PACKAGING SPEC 844418. 2. MANUFACTURER
MUST BARCODE IDENTIFY EACH ISSUE UNIT ON BOTH THE MATERIAL AND
OUTSIDETHE CONTAINER IN WHICH THE ISSUE UNIT IS CONTAINED. CODE TO
BEIN THE INTERNATIONAL CODE 39 BAR CODING SYSTEM FORMAT AND
ADHERETO ANSI MH10.8 ( LATEST EDITION) SPECIFICATION (LESS SECTIONS 12&
13). BAR CODE TAG MUST INCLUDE THE SAUDI ARAMCO STOCK NUMBERAND
PURCHASE ORDER NUMBER. ALL ITEMS SHOULD BE ASSEMBLEDTOGETHER PRIOR
TO TESTING.KITS COMPONENTS
1000809797
UNIT; EXPANDABLE, SOLID, ERW TYPE,COMPLETE ASSEMBLY MUST BEBOXED AS
AN INDIVIDUAL UNIT FOR SHIPMNET AND STORAGE.MANUFACTURER MUST BAR
CODE IDENTIFY EACH ISSUE UNIT ON BOTH THEMATERIAL AND OUTSIDE THE
PIPE,16",XPC,75#,LSX80,ERW,37F CONTAINER IN WHICH THE ISSUE UNIT ISCONTAINED. CODE TO BE IN THE
INTERNATIONAL CODE 39 BAR CODINGSYSTEM FORMAT AND ADHERE TO ANSI
T,EXPN,SES
NH10.8M (LATEST EDITION)SPECIFICATION (LESS SECTIONS 12 & 13) BAR CODE
MUST INDLUDE THESAUDI ARAMCO STOCK NUMBER AND PURCHASE ORDER
NUMBER, PACKAGINGSPEC 844418 APPLIES.KITS COMPONENTS
SCREEN; FLOREG INFLOW CONTROL DEVICE (ICD) TYPE,SIZE 4-1/2 IN XR3,LICD-SCREEN,480,FOR SANDSTONE INSTALLATION, SIZE: 4-1/2 IN 11.6 LB/FT,THREAD
1/2,NVAM,11.6#,500MC,SNDST CONNECTION: NEW VAM BOX X PIN, FILTER: CSM IN SS 316,JACKET LENGTH: 16
FT (SINGLE MODULE), MAX OD: 5.400 IN, MIN. ID:3.958 IN,
SCREEN; BAKER EQUALIZER TYPE,SIZE 4-1/2 IN, 11.6 LB/FT, 37 FEETLONG,L-80
PIPE AND ICD, 316L/304SS SCREEN,THREAD CONNECTION: NEWVAM BOX X PIN,
ICD-SCREEN,41/2,NVAM,11.6#,SCOARSE,SND EXCLUDER 2000 COARSE 16.5 FT SINGLE CARTRIDGE,RESTRICTOR MODULE: 23 PSI
AT 171 STB/DAY, TOOL O.D.: 5.300 IN,TOOL I.D. : 4.000 IN
Saudi Aramco: Company General Use
1000840031
1000794601
1000750624
90
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
Material Description
Material Long Description
392
Drilling Equipment
(Downhole
Equipment)
VALVE,SAFETY,41/2",NVAM,9CR1MO,TRSV,5K
393
Drilling Equipment
(Downhole
Equipment)
PACKER,SWELL,41/2X5.60",VTHC,13.5#,110
394
2015
Drilling Equipment
(Downhole
Equipment)
PACKER,LINER,41/2,NKS3B,13.5#,TBR 25FT
VALVE; SAFETY, TUBING-RETRIEVABLE, FLAPPER CLOSURE TYPE,SIZE 4-1/2
IN,5000 PSI SUPPLY,4-1/2-12.60 VAM-NEW, BOX-PIN END CONN,9CR-1MO/410
STAINLESS STEEL /NICKEL ALLOY 925 MATL BODY,API 14A,API CLASS 1 3S,NACE
MR0175 NACE MR-01-75,API-14A NACE MR-01-75/,ISO 1515 API
MONOGRAMMED,MAX. OD 6.73 IN, MIN ID 3.813 IN, OA LENGTH 57.16 IN, X
LOCK PROFILE, 1650 PSI MAX FULL OPEN PRESSURE, 600 PSI MIN CLOSING
PRESSURE, 20-300 DEG F TEMP RATING
PACKER; SWELLABLE, ISOLATION TYPE,PACKER TYPE: SWELLPACKER OS H2S.
PACKER DIMENSIONS: 4.5 IN X 5.60 IN X 9 M. DELAY SYSTEM: 6 A. SWELL
MEDIUM: OILSWELLING. TEMPERATURE UP TO 392 DEG F. TOTAL LENGTH: 40 FT.
MIN HANDLING SPACE PIN END: 2 FT. MIN HANDLING SPACE BOX END: 6 FT.
PACKER ELEMENT LENGTH: 30 FT. BASE PIPE OD: 4.5 IN. PACKER ELEMENT OD:
5.6 IN. END-RING OD: 5.6 IN. BASE PIPE WEIGHT: 13.5 PPF. BASE PIPE MATERIAL:
P-110. BASE PIPE NOMINAL ID: 3.920 IN. BASE PIPE DRIFT ID: 3.795 IN. THREAD
TYPE: VAM TOP HC. END RING MATERIAL: ST-52. END RING LENGTH: 4 IN.
PACKER, LINER: 'ZXP' LINER TOP, (BMSA-142)41XX-HC110 MYS, HT SOUR
SERVICE,25 FT TIE-BACK, 7 IN CASING OD, 29-32PACKER LINER; 'ZXP' LINER TOP
TYPE,(BMS A-142)41XX-HC110 MYS,FORHT SOUR SERVICE,25 FT TIE-BACK,7 IN
OD,29-32 LB/FT,NK-3SB BOXDOWN COONECTN,4-1/2 IN 13.5 LB/FT BOX DOWN
CONNECTN,NACEMR-01-75 97,WITH HOLD DOWN SLIPS, HR PROFILE AND XYLAN1052COATED, 6 IN MIN IDKITS COMPONENTS
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000744611
1000908558
1000644366
91
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
395
396
2015
Category
Drilling Equipment
(Advanced Well
Completion
Equipment)
Drilling Equipment
(Downhole
Equipment)
Material Description
Material Long Description
Material Number
9COM/9CAT
SCREEN,MESH,65/8,SLHT,24#,250MIC
SCREEN; MESH TYPE,SIZE 6-5/8 IN,6-5/8 INCH PREMIUM SCREEN FILTERMESH
TYPES, 6.63 PREMIUM SCREEN, 250 MICRON /316L, 0-TUBE, NOCENTRALIZER,
24.0LB/FT, SLHT,37-39FT, L-80 (BLANK SPACING -PINEND (IN)24, (BASE PIPE
WEIGHT(PPF) 24.0, (HOLE SIZE /BASE PIPE(IN) 1/2,(MATERIAL /SHROUD)304,
(LENGTH FILTER (FT) 28.0,(ACTIVE FLOW WETTED MATERIAL YIELD STRENGTH
(KSI) L80(80),316L(80), 316(25), OVER ALL LENGTH (IN ) 466, LOW
THREADCONNECTING - SIZE (IN),WT(PPF), TYPE CONFIG, 6.625,24 SLHT PIN,MAX
WORKING TEMPERATURE 200 DEG F, TENSILE STRENGTH (LBS) - EOECAT
SPECIFIED TEMP (FT) 356859(80), BASE PIPE LENGTH (FT) 37-39,(OUTER SHROUD
THICKNESS (GAUGE/IN) 14/0.75, (COLLAPSE PRESSURE(PSI) 4515, OD - MAX IN
7.400, (BLANK SPACING - BOX END (IN) 72,6.625 (MATERIAL/BASE PIPE) L80,
THREAD SIZE WT.TYPE CONFIG 6.63IN 24 LB/FT, SLHT, STANDARD, OPEN AREA
BASE PIPE (%) 10, MESHSIZE (MICRON) 250, OUTER DRAINAGE LAYER (YES/NO)
NO, OUTERSHROUD TYPE 20% OPEN AREA, O.D - SHROUD (IN) 7.400, (NUMBER
OFCENTRALIZERS) 0, CENTRALIZER TYPE NA, CENTRALIZER O.D (IN) NA,FISHING
O.D. (IN) 7.400, (SHROUD O.D.) SERVICE NACE (YES/NO)NO,(BURST PRESSURE
(PSI) 1081, I.D. (IN) 5.921 I.D - MIN (IN)5.921, ID -DRIFT (IN) 5.796, MAKE-UP
LENGTH (IN) 462, UPPERTHREAD CONNECTION - SIZE (IN), WT (PPF), TYPE CONFIG
6.625, 24SLHT, BOX (MATERIAL /ELASTOMERS) NA, MIN WORKING
TEMPERATURE(DRG.F)32, EXTERNAL WORKING PRESSURE (PSI) - EOEC AT
SPECIFIEDTEMP (F) 4515(80), INTERNAL WORKING PRESSURE (PSI) - EOEC
ATSPECIFIED TEMP (F) 1081(80), APPROXIMATE WEIGHT (LBS)1223.
1000828969
VALVE,SAFETY,41/2",NVAM,CRA,5K,TRSSSV
VALVE; FLAPPER, TUBING RETRIEVABLE SUBSURFACE TYPE,SIZE 4-1/2IN,5000 PSI
SUPPLY,4-1/2 IN 12.60 NEW VAM BOX-PIN ENDCONN,9CR-1MO/410/174PH/INCOLOY 925/ INCONEL 718 BODY,API14A/ISO 10432,API CLASS 1,3S API14A,NACE MR-01-75/ ISO 1515,APIMONOGRAMMED,MAXIMUM OD: 5.965 IN,
MINIMUM ID: 3.813 IN, SEALBORE MIN ID: 3.813 IN, LENGTH: 63.10 IN, LOCK
PROFILE: X,PRESSURE: 5000 PSI, TEMPERATURE: 20-300 DEG F, MAX. FULL
OPENPRESS.: 2000 PSI, MIN. CLOSING PRESS.: 600 PSI, PISTONDISPLACEMENT
VOL.: 1.09 CU. IN.,
1000806020
Saudi Aramco: Company General Use
92
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
Material Description
397
Drilling Equipment
(Downhole
Equipment)
ICD,4-1/2",NVAM,11.6#,61/8"OH,CARBO
398
Drilling Equipment
(Downhole
Equipment)
HANGER,LINER,14X185/8,TB,114#,T95,MEC
399
Drilling Equipment
(Downhole
Equipment)
LATERAL,9-5/8X7,LEVEL
4,3DEG,MILLRITE
2015
Material Long Description
EQUALIZER; NT TI TASKING VALVE (MTV), CF TYPE,HYDRO MECHANICALICD
(SPIRAL MODULE). ICD TYPE: HELICAL CHANNELS WITH MTV SYSTEM.ICD FLOW
RESISTANCE RATE: 1.9 FRR. RESTRICTOR MODULE: 90 PSI AT300 STB/DAY. MAX
OD: 5.630 IN. MIN ID: 3.510 IN. OPENINGMECHANISM: SHEAR WIRES. SETTING
TOOL REQUIRED: NONE. OPEN HOLESIZE: 6-1/8 IN. CONNECTIONS: 4-1/2 IN, 11.6
PPF, NEW VAM BOX XPIN. DEBRIS BARRIER MATERIAL: 316L STAINLESS STEEL.
HELIXMATERIAL: 13 CR. WORKING TEMPERATURE: 200 DEG F. SHEAR
VALUE:2,400 PSI.
HANGER LINER; 14 IN END 1,18-5/8 IN END 2,136 PPF END 2,TENARISBLUE
DOPELESS,14 IN, 114 PPF X 18-5/8 IN, 136 PPF CSG LINERHANGER AND
ACCESSORIESKIT COMPONENTS
LATERAL; 'MILLRITE' SYSTEM TYPE,9-5/8 IN NPS,3° DEG,LEVEL 4MULTILATERAL
EQUIPMENT. ALL ITEMS SHOULD BE ASSEMBLED TOGETHERPRIOR TO
TESTING.KITS COMPONENTSITEM QTY DESCRIPTION01 01 EA WHIPFACE:
#LATCHRITE# DRILLING;FOR 9-5/8 IN 47 PPF, 8.500 IN DRILLOUT,TOTAL LENGTH:
389.46 IN,DEBRIS BARRIER OD: 8.988 IN,MAX OD (CENTRALIZER PAD): 8.480
IN,WHIP BODY OD: 7.250 IN,WHIP BORE ID: 4.000 IN,MIN. ID (FLAPPER VALVE):
2.060 IN,WHIPFACE TAPER ANGLE: 3.00OPART NUMBER: 31491702 01 MILL:
WINDOW AND GAUGE, #LATCHRITE#;9-5/8 IN 40-47 PPF,TOTAL LENGTH: 73.83
IN,MAX OD: 8.500 IN,MIN. ID: 2.500 IN,TOP CONNECTION: API 4.5 in IF
PIN,TENSILE STRENGTH (4-1/2 THREAD): 1,017,426 LBS,TORSIONAL LOAD: 18,000
LBS,TORSIONAL YIELD: 20,000 LBS,FLOW AREA (THRU MILL): 0.59 IN2ASSEMBLY
WEIGHT: 543 LBS,PART NUMBER: 10149711/10156026403 01 JOINT:
TRANSITION, 7 IN 29 PPF, NVAM;TOTAL LENGTH: 316.53 IN, (8.04 M),MAX OD
(CENTRALIZER): 8.500 IN,BODY OD: 7.250 IN,MIN ID (SETTING SLEEVE): 6.130
IN,CASING WEIGHT: 23.200 PPF,CASING GRADE: L-80,TENSILE STRENGTH: 145,000
LBS,RUNNING TOOL:MAX OD: 8.450 IN,MIN ID (CONNECTOR): 2.625
IN,MATERIAL: 4145H MOD,TENSILE STRENGTH: 143,500 LBS,04 01 SHOE: FLOAT;
7 IN 26 PPF, NVAM,SUPER SEAL II,OD: 7.656 IN,ID: 6.276 IN,DRIFT: 6.125
IN,LENGTH: 2 FT.05 01 COLLAR: FLOAT; 7 IN 26 PPF,NVAM LATCHRITE,SUPER SEAL
II,OD: 7.656 IN,ID: 6.276 IN,DRIFT: 6.125 IN,LENGTH: 2 FT,06 01 WASHOVER
SHOE: 9-5/8 IN 47 PPF,TOTAL LENGTH: 301.11 IN,LENGTH OF CROSSOVER: 32.300
IN,LENGTH OF WASHOVER PIPE: 232.310 IN,LENGTH OF SHOE ASSEMBLY: 36.500
IN,THREADS TO BOTTOM: 9.060 IN,MAX OD (SHOE BOTTOM): 8.490 IN,MIN ID
(WASHOVER SUB): 3.000 IN,CONNECTION: API 4.5 in IF BOX,ASSEMBLY WEIGHT:
1400 LBS.PART NUMBER: 286179
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000839814
1000830809
1000817064
93
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Material Description
Material Long Description
Material Number
9COM/9CAT
400
Drilling Equipment
(Downhole
Equipment)
KIT,FRAC,41/2X5.875"OH,VTHC,13.5#,PK
PACKER PRODUCTION; STAGE FRAC BLANK STAGE ASSEMBLY TYPE,7.625
INOD,3.50 IN ID,7 IN OD,32-35 LB/FT,4-1/2 IN CONNECTN,13.5LB/FT,VAM TOP HC
BOX X PIN COONECTN,10000 PSI WORKING PRESSURESUPPLY,OPEN HOLE: 5-7/8
IN, MATERIAL: P-110KITS COMPONENTS:
1000835552
401
Drilling Equipment
(Downhole
Equipment)
HANGER,LINER,95/8X14,FJL,53.5#,625,HYD
402
Drilling Equipment
(Downhole
Equipment)
PACKER,PROD,7X41/2,VTHC,10K,HYD,1TRIP
Item
Category
403
Drilling Equipment
(Casing Accessories &
Cementing
Equipment)
DV TOOL,13-3/8",BTC,6172#,L80,MEC,3K
404
Drilling Equipment
(Casing Accessories &
Cementing
Equipment)
DV TOOL,13-3/8",BTC,4868#,L80,MEC,4FT
405
2015
Drilling Equipment
(Downhole
Equipment)
HANGER,LINER,7X95/8,VTHC,32#,41XX,HYD
HANGER LINER; HYDRAULIC ACTIVATI,9-5/8 IN END 1,53.5 PPF END 1,14 IN END
2,114 PPF END 2,VAM FJL KIT COMPONENTS
PACKER PRODUCTION; "THT", PERMANENT
TYPE,HYDRAULICACTIVATI,CUSTOMIZED BUNDLE, POLISHED BORE RECEPTACLE
WITH SEALUNIT, THT HYDRAULIC-SET, MULESHOE RE-ENTRY GUIDE.
COLLAR: PACKER; INFLATABLE ASSY; FOR13-3/8 IN. OD 61.0 - 72.0 LB/FTCASING;
API-5B BUTTRESS BOX AND PIN;COLLAR PACKER; INFLATABLE TYPE,FOR
CEMENTING H2S,MULTISTAGE,L-80 CASING,13-3/8 IN INSIDE O,61.0-72.0
LB/FT,BUTTRESSBOX & PIN THD TERMINAL,16-3/4 IN TOOL OD,12.3590 IN ID
DRILLOU,19-1/2 IN EXPANSIO,BOTTOM PLUG 1ST,FREE FALL PLUG 2ND,API 5B,API
5AC,FREE FALL PLUG SET CONSISTS OF SHUT-OFF BAFFLE & PLUGAND OPENING &
CLOSING PLUG, BOTTOM PLUG SET CONSISTS OF BY-PASSBAFFLE & PLUG,
PACKED TO CUSTOMER SPECS, CONTROLLED HARDNESS API5ACKITS
COMPONENTS
COLLAR: PACKER; INFLATABLE, MODEL (781 POST), WITH 4 FTELEMENT, FOR 133/8 IN 48-68 LB/FT CASING, WITH BTCTHREAD, BOX x PINCOLLAR PACKER;
INFLATIBLE TYPE,FOR CEMENTING,MULTI STAGE,L-80CASING,13-3/8 IN INSIDE
O,48-68 LB/FT,18-5/8 IN OUTSIDE,115LB/FT OUTSIDE,BTC BOX X BTC PIN THD
TERMINAL,15.500 IN TOOLOD,12.250 IN ID DRILL OU,19 IN
EXPANSIO,DISPLACEMENT PLUG2ND,API 5D,EACH POST TOOL MUST BE BOXED
AS INDIVIDUAL UNITS FORSHIPMENT AND STORAGE.KITS COMPONENTS
HANGER, LINER: HYDRAULIC-ROTATING ACTIVATION, HT SOUR SERVICE, (BMS A142) 41XX-HC110 MYS, 4 IN END 1, 32 0 HANGER LINER; HYDRAULIC-ROTATING
ACTIVATI,FOR HT SOUR,GR (BMS A-142) 41XX-HC110 MYS,4 IN END 1,32.0 LB/FT
END 1,9-5/8 IN END 2,43.5-58.4 LB/FT END 2,7 IN END CONN,7 IN 32 LB/FT VAM
TOP HC PIN X PIN,C-110 EQUIVALENT - NACE TEST TM0177 WAIVED,6.074 IN MIN
ID, GEN-2. HANGER AND ITS COMPONENTS SHOULD BE BOXED TOGETHER. KITS
COMPONENTS
Saudi Aramco: Company General Use
1000835539
1000792070
1000022920
1000644503
1000644360
94
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
406
407
408
409
2015
Category
Drilling Equipment
(Downhole
Equipment)
Material Description
Material Long Description
VALVE; SUBSURFACE SAFETY, TRMAXX-5E TYPE,SIZE 4-1/2 IN,5000 PSIWORKING
PRESSURE SUPPLY,4-1/2 IN, 12.6 PPF, NEW VAM BOX X PINEND CONN,9CR-1MO,
410-13CR BODY,9CR-1MO, 410-3CR, 4130/4140TRIM,API-14A/ISO10432,CLASS 2
3S,3C NACE MR-01-75,API-14A NACEMR-01-75/,ISO 1515 API
MONOGRAMMED,MAX. OD: 6.923 IN, MIN. ID:3.812 IN, MAKE-UP LENGTH: 60 IN,
NIPLLE PROFILE: 3.812 X TYPE,THREAD CONFIGURATION: BOX X PIN, THREAD
VALVE,SAFETY,4SIZE: 4-1/2 IN, THREADTYPE: NEW VAM, HYDRAULIC CONNECTION: 1/4 IDFC,
1/2",NVAM,CRA,5K,TRMAXX5E
OPENING PRESSURE:1,915 PSI, CLOSING PRESSURE: 815 PSI, TEMPERATURE
RATING: 40-300DEG F, MATERIAL: FLOW WETTED: 9CR-1MO/ 410-13CR, HYD.
CHAMBERHSNG.: 410-13CR, LOWER NIPPLE: 9CR-1MO, SPRING: X-750,
TENSILESTRENGTH- EOEC @ AMBIENT: 413,374 LBS , EOEC @ SPECIFIED TEMP(F)
: 376,100 LBS (300 DEG F), YIELD PRESSURE- EXTERNAL: 5,978PSI, INTERNAL:
8,034 PSI
PACKER LINER; JMZXDG TYPE,NICKEL ALLOY 625 PLUS,8.312 IN OD,7 IN LINER
KIT,TIEBACK,7",VTHC,32#,625,PK OD,32 PPF LINER,9-5/8 IN OD,47.0 - 53.5 PPF,8.375 IN EXT OD,6.039 IN EXT
ID,VAM TOP HC BOX UP X MULESHOE DOWN COONECTN,7 IN 32 PPF
RSEAL,MDSK
CONNECTN,7 IN X 9-5/8 IN 58.4 PPF UPPER COMPLETION FOR HASBAH
INCREMENT. KIT COMPONENTS
COLLAR: PACKER; INFLATABLE ASSY;INFLATABLE: FOR 18-5/8 IN. OD 115.0LB/FT;
CASING W/API 5B BUTTRESS THREADCOLLAR PACKER; INFLATABLE TYPE,FOR
CEMENTING,MULTI STAGE,K-55CASING,18-5/8 IN INSIDE O,115.0 LB/FT,24 IN
Drilling Equipment
OUTSIDE,176.0 LB/FTOUTSIDE,BUTTRESS BOX & PIN THD TERMINAL,20-4/5 IN
(Casing Accessories &
DV TOOL,18TOOLOD,17.3750 IN ID DRILL OU,24 IN EXPANSIO,BOTTOM PLUG 1ST,FREEFALL
Cementing
5/8",BTC,115#,K55,MEC
PLUG 2ND,API 5B,FREE FALL PLUG SET CONSISTS OF SHUT-OFFBAFFLE & PLUG
Equipment)
AND OPENING & CLOSING PLUG, BOTTOM PLUG SETCONSISTS OF BY-PASS
BAFFLE & PLUG, PACKED TO CUSTOMER SPECSKITS COMPONENTS
Drilling Equipment
(Downhole
Equipment)
Drilling Equipment
(Casing Accessories &
Cementing
Equipment)
DV TOOL,13-3/8",VAM
TOP,72#,C95HCHS,4FT
COLLAR: PACKER; INFLATABLE, MODEL 781POST F/13-3/8 IN OD 72 LB/FT CASING,
W/4 FT ELEMENT, VAM TOP THREAD, BOX X PINCOLLAR PACKER; INFLATABLE
TYPE,FOR CEMENTING,MULTISTAGE,C-95HCCHS CASING,13-3/8 IN INSIDE O,72
LB/FT,18-5/8 INOUTSIDE,115 LB/FT OUTSIDE,VAM TOP BOX & VAM TOP PIN
THDTERMINAL,15.875 IN TOOL OD,12.25 IN ID DRILL OU,18.5 - 20.20
INEXPANSIO,AS PER THREAD MANUFACTURER'S SPECS,EACH POST TOOL MUSTBE
BOXED AS INDIVIDUAL UNITS FOR SHIPMENT AND STORAGE. THIS TOOLDOES
NOT HAVE A PLUG SET WITH IT. PACK TO SAUDI ARAMCOSPECIFICATIONKITS
COMPONENTS
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000732501
1000891632
1000022922
1000024890
95
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
Material Description
410
Drilling Equipment
(Downhole
Equipment)
VALVE,SAFETY,95/8,VAM21,53.5#,718,TRSSV
411
Drilling Equipment
(Casing Accessories &
Cementing
Equipment)
DV TOOL,9-5/8",LTC,29.340#,P110,MEC
412
Drilling Equipment
(Downhole
Equipment)
WHIPSTOCK,7",5.375,2335#,HYD,PKR,3.0DG
413
Drilling Equipment
(Advanced Well
Completion
Equipment)
PDHMS,4-1/2,NVAM,DUAL
GAUGE
414
Drilling Equipment
(Downhole
Equipment)
415
Drilling Equipment
(Casing Accessories &
Cementing
Equipment)
2015
Material Long Description
VALVE; SAFETY TYPE,SIZE 9-5/8 IN, 53.5 PPF,NICKEL ALLOY 718, 140 KSI MYS
BODY,API-14A,NACE MR-01-75/ ISO 1515,API MONOGRAMMED,SELF EQUALIZING
TUBING RETRIEVABLE SUB SURFACE SAFETY VALVE, THREAD: VAM 21, TOOL ID:
12.200 IN, UPPER SEAL BORE: 8.375 IN LOWER SEAL BORE: 8.250 IN, WORKING
PRESSURE: 10,000 PSI
COLLAR: PACKER; INFLATABLE ASSY;INFLATABLE; F/9-5/8 IN. OD 29.3 TO 40LB/FT
CASING; W/API 5B LTC THREAD;COLLAR PACKER; INFLATABLE TYPE,FOR
CEMENTING,MULTI STAGE,P-110CASING,9-5/8 IN INSIDE O,29.3-40.0 LB/FT,133/8 INOUTSIDE,61.0-72.0 LB/FT OUTSIDE,8RD LTC BOX & LTC PIN
THDTERMINAL,11-3/4 IN TOOL OD,8.9270 IN ID DRILL OU,14
INEXPANSIO,BOTTOM PLUG 1ST,FREE FALL PLUG 2ND,API 5B,FREE FALLPLUG SET
CONSISTS OF SHUT-OFF BAFFLE & PLUG AND OPENING &CLOSING PLUG,
BOTTOM PLUG SET CONSISTS OF BY-PASS BAFFLE & PLUG,PACKED TO CUSTOMER
SPECS, WITH RUPTURE DISC ASSEMBLY HALLIBURTONP/N 100075423 (OLD PART
NO 813.30290)KITS COMPONENTS
WHIPSTOCK:7 IN OD, HYDRAULIC SET,RETRIEVABLE TRACKMASTER ONE TRIP SIDETRACKING SYSTEM, FOR 7 IN 23-35 LB/FTCASING.WHIPSTOCK; HYDRAULIC SET,
RETRIEVABLE TRACKMASTER ONE TRIPSIDE-TRACKING SYSTEM TYPE,7 IN BODY
STD,ONE TRIP-SIDE TRACKINGSYSTEM TRIP,5-3/8 IN OD, COMPLETE WITH
TRACKMASTER SLIDE WITH 3DEGREES FACE WITH HOOK RETRIEVING SLOT AND
HYDRAULIC RETRIEVABLEPACKER, FOR 7 IN 23-35 LB/FT CASING.-----ASSEMBLY; MONITORING TYPE,DOWN HOLE, 4-1/2 IN, DUAL, PERMANENT KIT
COMPONENTS
PACKER PRODUCTION; FOR STAGE FRAC SET UP ASSEMBLY,5.625 INOD,3.50 IN
ID,7 IN OD,32-35 LB/FT,4-1/2 IN CONNECTN,13.5LB/FT,VAM TOP HC BOX X PIN
COONECTN,10000 PSI PSI WORKINGPRESSURE SUPPLY,MATERIAL: P-110KITS
COMPONENTS:
CENTRALIZER CASING; BLADE RUNNER TYPE,4-1/2 IN X 5-7/8 IN (OD5-5/8 IN)
CASING,TYPE: SOLID BODY, SLIP ON. BLADES: 5 X SPIRALRIGHT HAND. MATERIAL:
CENTRALIZER,41/2",BLADERUNNER,5.625"OD ZINC-ALLOY/TEFLON. WEIGHT (KG): 4.40.FLOW-BY (SQ INS): 6.41.
MANUFACTURING PROCESS: DIE CAST.
KIT,FRAC,41/2X7",VTHC,13.5#,LH-PK-SL
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000830504
1000024738
1000709228
1000754847
1000835550
1000886008
96
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
416
417
418
2015
Category
Drilling Equipment
(Downhole
Equipment)
Material Description
Material Long Description
Material Number
9COM/9CAT
KIT,VALVE,ISOL,51/2",VTOP,13CR+TOOL+JTS
VALVE BALL; SIZE 5-1/2 IN,5000 PSI SUPPLY,VAM TOP PIN ENDCONN,13CR AISI
420 MOD 80 KSI MYS BODY,ACTUATED OPERATED,VALVEOD (IN): 8.200. VALVE ID
(IN): 4.625. SEAL BORE ID (IN): 6.000.WORKING PRESSURE (PSI): 5,000. TEST
PRESSURE (PSI): 6,250. YIELDPRESSURE RATING (PSI): 6,250 (BURST), 5,000
(COLLAPSE). WORKINGTEMPERATURE (°F): 35-300. BALL DIFFERENTIAL PRESSURE
FROMABOVE/BELOW (PSI): 5,000. DIFFERENTIAL OPENING RATING (PSI):1,000.
VALVE METALLURGY: 13CR AISI 420 MOD 80 KSI MYS. VALVESEALS: NONELASTOMERIC. RUNNING PULLING TOOL (RPT): H826700001.RPT METALLURGY:
LOW ALLOY STEEL, 80KSI MYS. SHEAR VALUE: 60KLBSTO RELEASE. RPT PACKING
UNIT: BONDED NITRILE. PRODUCTIONSHIFTING TOOL (PST): H826710001. PST
METALLURGY: 13CR AISI 420MOD 80 KSI MYS. PST PACKING UNIT: A-RYTE
(AFLAS). TSOJMETALLURGY: LOW ALLOY STEEL, 80KSI MYS. TSOJ ELASTOMERS:
NOSEALS WITHIN TSOJ.KIT COMPONENTS
1000885079
Drilling Equipment
(Advanced Well
Completion
Equipment)
SCREEN; RESFLOW INFLOW CONTROL DEVICE (ICD) TYPE,SIZE 5-1/2 IN X40 FT
LG,SS316L,FOR SANDSTONE INSTALLATION, BASE PIPE MATERIAL:L-80, PIPE SIZE:
5-1/2 IN, 20.0 LB/FT, THREAD CONNECTION: NEWVAM, WEIGHT: 26.64 LB/FT,
DISPLACEMENT: 0.50 GAL/FT, AXIAL RODPROFILE: 4.0 X 3.0 MM, NO. OF RODS:
ICD-SCREEN,51/2,NVAM,20.8#,225MC,SNDST 32, WRAP WIRE PROFILE: 4.0 X3.0 MM, SCREEN (WRAPPED) INFLOW AREA:
6.98%, SLOT OPENING: 225MICRONS/0.009 IN, CENTRALIZER PER LOCATION:
ONE/JT @ PIN END,NO. OF STOP COLLARS: TWO/CENTRALIZERS, NOZZLE
DIAMETER: 4 MM,NUMBER OF NOZZLES: 4 PER JOINT.
1000778519
Drilling Equipment
(Advanced Well
Completion
Equipment)
CABLE; PERMANENT DOWNHOLE TYPE,18 AWG DIA,TIN COATED COPPER,1.16
MM OD,1000 VDC, WITH T-05 DIELECTRIC 2.60 MM OD, TYPE-06FILLER, 4.57 MM
OD, TYPE 825 INCOLOY ALLOY TUBE 0.035 IN WALLTHK, 6.35 MM OD TYPE
CABLE,DOWNHOLE,18AWG,1/4", POLYAMIDE NYLON JACKET, 11 MM X 11 MM SIZE,ELECTRICAL CHARACTERISTICS:
INC825,1FT
DC RESISTANCE AT 20 DEG C CENTERCONDUCTOR: 21.06 OHMS/KM,
CAPACITANCE CENTER CONDUCTOR TO TUBE:99 PF/M, INSULATION RESISTANCE
AT 20C CENTER CONDUCTOR TO TUBLE:2900 MEG-OHM/KM.
1000839686
Saudi Aramco: Company General Use
97
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
419
420
421
2015
Category
Material Description
Material Long Description
Material Number
9COM/9CAT
Drilling Equipment
(Advanced Well
Completion
Equipment)
SCREEN; EXPANDABLE SAND (ESS), CORROSION RESISTANT TYPE,SIZE
4IN,INCOLOY 825,WITH 230 MICRON WEAVE SIZE, JOINT (SCREEN)LENGTH: 38 FT,
BASE PIPE DIA: 4 IN, BASE PIPE MATERIAL: ALLOY28, WITH MK I ESS BOX X PIN
CONNECTIONS. 1- COMPLETE ASSEMBLYMUST BE BOXED AS AN INDIVIDUAL UNIT
FOR SHIPMENT AND STORAGE PERSAUDI ARAMCO PACKAGING SPEC 844418. 2SCREEN,EXPAND,4",MKI,230MIC, MANUFACTURER MUST BARCODE IDENTIFY EACH ISSUE UNIT ON BOTH THE
MATERIAL AND OUTSIDETHE CONTAINER IN WHICH THE ISSUE UNIT IS
INC825,SNDST
CONTAINED CODE TO BE INTHE INTERNATIONAL CODE 39 BAR CODING SYSTEM
FORMAT AND ADHERE TOANSI MH10.8M (LATEST EDITION) SPECIFICATION (LESS
SECTIONS 12 &13). BAR CODE TAG MUST INCLUDE THE SAUDI ARAMCO STOCK
NUMBER ANDPURCHASE ORDER NUMBER. 3- ALL ITEMS SHOULD BE ASSEMBLED
TOGETHERPRIOR TO TESTING.
1000804355
Drilling Equipment
(Advanced Well
Completion
Equipment)
ICD-SCREEN,51/2,NVAM,17#,350MC,SNDST
SCREEN; FLOREG ICD WITH 350 MICRON DIRECT WRAP SCREEN TYPE,SIZE 5-1/2
IN,SS316L,GRADE: L-80, BASE PIPE SIZE: 5-1/2 IN, BASE PIPE MATERIAL: SS316L,
WITH SLOT AT 0.014 IN GAUGE OPENING (SLOT TOLERANCE +0.002 IN, -0.003 IN).
BASE PIPE WEIGHT: 17 PPF, BASE PIPE GRADE: L-80, CONNECTION: NEW VAM PIN
X BOX AT 38 FT (+0, -1 FT). SCREEN LENGTH AT 16 FT WITH IN –FLOW CONTROL
DEVICE. HOUSING RETAINING RING: 316L, HOUSING: 13CR-80KSI, FLOW RING:
316L, THREADED RING: 316L, FLOW PORT MATERIAL: TUNGSTEN CARBIDE, SET
SCREW (5/16 UNF): 316L, O-RING: VITON, DIRECT WRAP TENSILE: 337,000 LBS,
DIRECT WRAP TORQUE: 33,000 FT-LBS, DIRECT WRAP BURST: 3,555 PSI, DIRECT
WRAP COLLAPSE: 4,535 PSI.
1000840975
VALVE,ICV,31/2",NVAM,9.2#,13CR,HCM-A
VALVE; HCM-A TYPE,SIZE 3-1/2 IN,7500 PSI SUPPLY,3-1/2 IN. 9.2PPF NEW VAM
BOX X PIN END CONN,13CR/INC 718/925/825 & TUNGSTENCARBIDE BODY,MAX
OD: 5.850 IN, MIN ID: 2.812 IN, LENGTH: 102 IN,MAX WORKING TEMP.: 40325OF, CONTROL CHAMBER PRESS. RATING:10000 PSI, RUPTURE DISC PRESSURE:
9,000 PSI, INCREMENTALPISTONDISPLACEMENT: 19 ML MAX, VALVE IS CAPABLE
OF HAVING 8 TO 12CHOKING POSITIONS INCLUDING THE FULLY OPEN AND FULLY
CLOSEDPOSITION. THE DESIGN ALSO PROVIDES THE ABILITY TO MOVE TO
THEFULLY CLOSED POSITION WITH A HYDRAULIC PRESSURE APPLICATION TOTHE
CLOSE PORT. VALVE SHALL BE CAPABLE TO "PROGRESSIVELY OPEN"WITH RAPID
CLOSURE.
1000782380
Drilling Equipment
(Downhole
Equipment)
Saudi Aramco: Company General Use
98
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
422
Drilling Equipment
(Downhole
Equipment)
423
Drilling Equipment
(Downhole
Equipment)
424
425
2015
Drilling Equipment
(Downhole
Equipment)
Drilling Equipment
(Downhole
Equipment)
Material Description
Material Long Description
PACKER, LINER: ZXP, (BMS A-142)41XX-HC110 MYS, HT SOUR, 15 FT X 7 50 IN 29
LB/FT TIE-BACK, 7 IN LINER PACKER LINER; ZXP TYPE,(BMS A-142)41XX-HC110
MYS,FOR HT SOUR,15 FT X 7.50 IN 29 LB/FT TIE-BACK,7 IN LINER OD,29 LB/FT
PACKER,LINER,7",NK3SB,29#,41X LINER,9-5/8 IN OD,47.0-53.5 LB/FT (ALSO 58.4 LB/FT SPECIAL DRIFT),7.5000 IN
X,TBR 15FT
EXT OD,NK-3SB BOX DOWN COONECTN,7 IN 29 LB/FT CONNECTN,(C-110
EQUIVALENT-NACE TEST TM0177 WAIVED),WITH HOLD DOWN SLIPS AND HR
PROFILE, XYLAN-1052 COATED, 6.276 IN MIN ID. ELEMENT RATING:10,000 PSI
KITS COMPONENTS
SUBSURFACE SAFETY VALVE, WIRELINE RETRIEVABLE ASSY. FLAPPER TYPE, 3.813
X 2.12, H2S SERVICE VALVE; SUBSURFACE SAFETY TYPE,SIZE 3.813 X 2.12,10,000
PSI WORKING PRESSURE SUPPLY,***** END CONN,API 14A,NACE MR-01-75 APIVALVE,SAFETY,414A,NACE MR-01-75/ ISO 1515,API MONOGRAMMED,FLAPPER TYPE "FXE" PART#
1/2,10K,WRSSSV,FXE
120056486 TOP THREAD 3-1/4-12-UN, SPECIAL FEATURE, EQUALIZING, REQUIRES
LOCKING MANDREL PART# 101070268 KITS COMPONENTS
Material Number
9COM/9CAT
1000644357
1000026440
KIT,LINER,41/2X7",NK3SB,13.5#,CRA
LINER; DEPLOYMENT, KIT TYPE,LINER DEPLOYMENT KIT FOR 4-1/2 INEXCLUDER
SCREENKITS COMPONENTS: CONSIST OF:ITEM QUANTITY DESCRIPTION01 01
Baker Model ZXP-Flexlock #Liner Packerwith 15ft. 5-1/4 IN. Tie-back sleeve(HR
profile)Size: 7 IN. 32 lb/ft.Threads: 5 IN. 18lb/ft NT-3SB PinTool O.D.: 5.875
IN.Tool I.D.: 4.250 IN.Material: S13Cr 95-110 KSIXylan 1052 Co aledHanging
Capacity: 380,000#Pressure Rating: 10,000 psiPART# H29316011002 01 Baker
Casing SubSize: 5 IN. 18lb/ft X 4-1/2 13.5lb/ftThread Connection Up: 5 IN. 18
lb/ftTN-3SB Box TOPThread Connection Down: 4.5 IN. 13.5Lb/ft TN-3SB PinTool
O.D.: 5.000 IN.Tool I.D.: 3.820 IN.Material: S13Cr-95PART# H29989383003 01
Baker#Magnum# Dual Acting DiscSize: 4-1/2 IN. 13.5 lb/ftThread Connection: TN3SBTool O.D.: 5.300 IN.Tool I.D.: 3.877 IN.Material: Super 13Cr 95 KSIPressure
Rating: 10,000 psiPART# SAP1016706504 01 Baker Bull PlugSize: 4-1/2 IN.Thread:
4.5 IN. 12.60 lb/ft TN-3SB BOXTool O.D.: 5.000 IN.Material: Super 13Cr-95
KSIPART# H485304566
1000751501
PACKER,ISOL,41/2X7"OH,NK3SB,MPAS,13CR
PACKER PRODUCTION; MECHANICAL TYPE,HYDRAULIC SET ACTIVATI,5.000IN
(MAX) OD,2.897 IN (MIN) ID,S13% CR MODEL "MPAS" OPEN HOLEMECHANICAL
PACKER, SIZE: 4-1/2 IN X 5 IN OD, SETTING MECHANICSM:HYDRAULIC SETTING
TOOL REQUIRED: WORKING SHIFTING TOOL, OPENHOLE RANGE: 5-7/8 IN X 7 IN,
CONNECTION: 4-1/2 IN 13.5 LBTENARIS 3SB BOX X PIN, MATERIAL: SUPER 13CR,
95 KSI MYS, ELEMENTELASTOMER: NITRILE, TEMPERATURE RATING: 300 DEG F,
TENSILERATING: 246000 LBS
1000827889
Saudi Aramco: Company General Use
99
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Category
426
Drilling Equipment
(Advanced Well
Completion
Equipment)
SCREEN; BAKER EQUALIZER TYPE,SIZE 5-1/2 IN, 17 LB/FT, 37 FEET LONG,L-80 PIPE
AND ICD, 316L/304SS SCREEN,THREAD CONNECTION: NEW VAM BOX X PIN,
ICD-SCREEN,51/2,NVAM,17#,COARSE,SNDST EXCLUDER 2000 COARSE 16.5 FT SINGLE CARTRIDGE, RESTRICTOR MODULE: 23
PSI AT 171 STB/DAY, TOOL O.D.: 6.520 IN, TOOL I.D. : 4.892 IN
1000750623
Drilling Equipment
(Downhole
Equipment)
WHIPSTOCK,7",3.625,3238#,HYD,2.0DG,TT
WHIPSTOCK; THROUGH TUBING TYPE,3-5/8 IN OD BODY STD,RETRIEVABLETRIP,7
IN CSNG DRE,32-38 LB/FT CSNG DRE,15 FT LONG, 2.00 INSCOOP RADIUS. THE
WHIPSTOCK ANCHOR IS FIRMLY SET BY UTILIZING ASIZE 10 E-4 WIRELINE
PRESSURE SETTING ASSEMBLY OR A SIZE 10 JHYDRAULIC SETTING TOOL. 1- ITEMS
MUST BE BOXED AS PER SAUDIARAMCO PACKAGING SPEC 844418. 2MANUFACTURER MUST BAR CODE/IDENTIFY EACH ISSUE UNIT ON BOTH THE
MATERIAL AND OUTSIDE THECONTAINER (IN WHICH THE ISSUE UNIT IS
CONTAINED). CODE TO BE INTHE INTERNATIONAL CODE 39 BAR CODING SYSTEM
FORMAT AND ADHERE TOANSI MH10.8M (LATEST EDITION) SPECIFICATION (LESS
SECTIONS 12 &13). BAR CODE TAG MUST INCLUDE THE SAUDI ARAMCO STOCK
NUMBER ANDPURCHASE ORDER NUMBER. ALL ITEMS SHOULD BE ASSEMBLED
TOGETHERPRIOR TO TESTING.
1000804765
HANGER,LINER,41/2X7,NK3SB,13.5#,CRA,HYD
HANGER, LINER: HYDRAULIC-ROTATINGACTIVATION, HT SOUR SERVICE, (BMSA142) 41XX-HC110 MYS, 4-1/2 IN END 1,HANGER LINER; HYDRAULIC-ROTATING
ACTIVATI,FOR HT SOUR,GR (BMSA-142) 41XX-HC110 MYS,4-1/2 IN END 1,13.5
LB/FT END 1,7 IN END2,29-32 LB/FT END 2,4-1/2 IN END CONN,4-1/2 IN 13.5
LB/FTNK-3SB,T-95 EQUIVALENT-NACE TEST TM0177 WAIVED,FOR KHUFF GEN2.AND JOINT COLLAPSE PRESSURE, 10,710 PSI MIN BODY AND JOINT
BURSTPRESSURE: 364,000 LBS. BODY AND JOINT TESNILE STRENGTH. KHUFFLINER
HANGER SYSTEM COMPLETE ASSEMBLY. MUST BE BOXED AS ANINDIVIDUAL UNIT
WITH ITS COMPONENTS AS LISTED BELOWKITS COMPONENTS
1000644367
SCREEN; FLOREG INFLOW CONTROL DEVICE (ICD) TYPE,SIZE 5-1/2 IN XR3,L80,FOR SANDSTONE INSTALATION, MAT'L: L-80, FILTER: CSM INSS 316L, PIPE SIZE:
ICD-SCREEN,51/2,NVAM,17#,FLOREG,SNDST 5-1/2 IN 17.0 LB/FT, THREAD CONNECTION: NEWVAM BOX X PIN, JACKET
LENGTH: 16 FT (SINGLE MODULE), MAX OD:6.500 IN, MIN ID: 4.892 IN
1000794602
427
428
Drilling Equipment
(Downhole
Equipment)
429
Drilling Equipment
(Advanced Well
Completion
Equipment)
2015
Material Description
Material Long Description
Material Number
9COM/9CAT
Item
Saudi Aramco: Company General Use
100
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
430
431
2015
Category
Drilling Equipment
(Downhole
Equipment)
Material Description
PACKER,ECP,6.125x4/2,NVAM,12.6#,MECH
Material Long Description
PACKER PRODUCTION; OPEN HOLE, MECHANICAL TYPE,FOR STANDARD,5.625IN
(MAX) OD,3.500 IN (MIN) ID,SIZE: 6-1/8 IN, MATERIAL: VAM,AMBIENT), MAX SET
DOWN/PULL UP DURING RIH: L-80, LENGTH: 176.500IN, 100000 LBS, HOLE SIZE
(ID): THREAD UP: 4-1/2 IN OD 12.6 6.00TO 7.00 IN ROUND HOLE LB/FT NEW VAM
BOX THREAD & 6.30 IN X 7.00IN OVAL DOWN: 4-1/2 IN OD 12.6 HOLE, RELEASE
SLEEVE SHEAR LB/FTNEW VAM PIN, BASE MATERIAL : AISI 4140 (18-22 SCREW
RTG: 4250 TO5750 HRC), ELASTOMERS : HNBR CUP LBS, MAX BYPASS FLOW RATE:
5BBL/MIN (WATER), TORQUE SEAL, HNBR O-RINGS, DESIGN RATING THRUTOOL:
3000 FT VERIFICATION : ISO 14310 LBS. V3, QUALITY CONTROLGRADE : Q3,
WEIGHT OF TOOL: 510 LBS (185 KG), DIFFERENTIALPRESSURE RATING : 2000 PSI ,
BURST RATING OF TOOL: 3000 PSI,COLLAPSE RATING OF TOOL: 3000 PSI,
HYDROSTATIC SETTING PRESSURERANGE : 2600 TO 6500 PSI, OPERATING
TEMPERATURE :20 TO 110 DEGC, RUNNING TEMPERATURE :20 TO 110 DEG C,
TENSILE RATING: 193358LBS (MAIN MANDREL), COMPRESSION RATING: 115000
LBS (40% NEW
CEMENTER; POST HTHP TYPE,9-5/8 IN OD,53.5 LB/FT WT,TENARIS 3SB
(NK3SB),11.75 IN TOOL OD,8.505 IN (ID) DRILL OD,(2-STAGE) MECHANICAL
PACKOFF. CASING GRADE: API GRADE T-95. ELEMENT MATERIAL: HNBR. OD
(MAX): 11.75 IN. PACKER ELEMENT OD: 11.25 IN. DRILLOUT ID: 8.505 IN. DRIFT:
8.500 IN. OVERALL LENGTH: 10.5 FT. PACKER ELEMENT LENGTH: 0.3 FT. OPENING
SEAT ID: 7.250 IN. CLOSING SEAT ID: 7.750 IN. OPENING PRESSURE: 400-600 PSI
(INNER SLEEVE MOVESTO BEGIN PACKER SET). PACKER SETTING PRESSURE
Drilling Equipment
(SHIFTS CONE AND SETS SLIPS): 2140 PSI (12 SCREWS @ 178 PSI PER SCREW).
(Casing Accessories &
DV TOOL,9OPENING OF STAGE TOOL PORTS (EXTERNAL SLEEVE OPENING PRESSURE): 3000
Cementing
5/8",NK3SB,53.5#,T95,MEC,HTHP PSI (MAXIMUM) 12 SCREWS @ 250 PSI PER SCREW. CLOSING PRESSURE: 1200 PSI.
Equipment)
STAGE TOOL SEALS: FLOUROCARBON O-RING SEALS. CEMENTING PORTS: SIX 11/8 IN DIA PORTS. MAXIMUM INTERNAL PRESSURE: 7800 PSI. MAXIMUM
EXTERNAL PRESSURE: 7480 PSI. SAFE LOAD BELOW TOOL (FS = 1.5): 909,000 LBS.
MAXIMUM TEMPERATURE RATING: 350 DEG F. MAXIMUM DIFFERENTIAL
PRESSURE (ABOVE ELEMENT): 7000 PSI WITH WATER (WHEN SET INSIDE 13-3/8
IN, 86 PPF P-110 CASING). MAXIMUM DIFFERENTIAL PRESSURE (BELOW
ELEMENT): 4500 PSI WITH WATER AND 3600 PSI WITH GAS (PLUG SET REQUIRED
FOR TOOL OPERATION MUST BE ORDERED SEPARATELY).
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000827791
1000882666
101
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
432
433
434
435
2015
Category
Drilling Equipment
(Downhole
Equipment)
Drilling Equipment
(Casing Accessories &
Cementing
Equipment)
Drilling Equipment
(Downhole
Equipment)
Drilling Equipment
(Downhole
Equipment)
Material Description
Material Long Description
Material Number
9COM/9CAT
HANGER: LINER ASSY; 7 IN 32# VAM TOP HCX 9-5/8 IN 53.5-58.4# 'TSP' HYDROHANGER, 6.0" MIN. DRIFT ID, GEN-2,HANGER LINER; HYDRAULIC ACTIVATI,FOR
H2S SOUR SERVICE,GR41XX-95000 MYS (C-95),7 IN END 1,32 LB/FT END 1,9-5/8
IN. END2,53.5 - 58.4 LB/FT END 2,VAM TOP HC END CONN,NACE MR-0175,TIWTYPE TSP-RRP FOR 7 IN GENERATION-2 KHUFF LINER HANGER
SYSTEMS.COMPLETE ASSEMBLY MUST BE BOXED AS AN INDIVIDUAL UNIT WITH
ITSCOMPONENTS AS LISTED BELOWKITS COMPONENTS
1000023992
DV TOOL,9-5/8",NK3SB,43.553.5#,MEC,3FT
COLLAR: PACKER; INFLATABLE ASSY; ESIPC;F/9-5/8 IN NK3-SB 43.5-53.5
LBS/FTCASING; W/RUPTURE DISK; W/3 FT ELEMENT;COLLAR PACKER; INFLATABLE
TYPE,FOR CEMENTING,MULTI STAGE,C-95 OREQUIVALENT CASING,9-5/8 IN.
INSIDE O,43.5-53.5 LBS/FT,13-3/8 IN.OUTSIDE,61-72 LBS/FT OUTSIDE,NK3-SB
TERMINAL,11.38 IN. TOOLOD,8.619 IN. DRILL OU,13.5 IN. EXPANSIO,API 5B,EACH
PACKERCOLLAR MUST BE BOXED AS AN INDIVIDUL UNIT FOR SHIPMENT
ANDSTORAGE, THIS DV PACKER DOES NOT HAVE PLUG SET INCLUDED WITH
IT.AND DOES NOT INCLUDE HANDLING SUB WITH IT. COMPLETE ASSEMBLYMUST
BE BOXED AS AN INDIVIDUL UNIT WITH ITS COMPONENTSKITS COMPONENTS
1000024893
PACKER,SWELL,41/2X6.125"OH,SLIPON
PACKER PRODUCTION; RESPACK TYPE,SWELLABLE ACTIVATI,5.790 INOD,4.607 IN
ID,4.5 IN OD,OPEN,OPEN CONNECTN,OPEN,OPENCOONECTN,OPEN HOLE SIZE:
6.125 IN. PACKER LENGTH: 18 IN.EXTERNAL ELEMENT THICKNESS (SWELLING
RUBBER): 0.913 IN. SUPPORTTUBE THICKNESS (CARBON STEEL): 0.100 IN. INNER
ELEMENT THICKNESS(SWELLING RUBBER): 0.180 IN. END RING LENGTH: 1.750 IN.
END RINGOD: 5.790 IN. END RING ID: 4.560 IN.
1000875948
PACKER PRODUCTION; QHSB HYDRAULIC SET RETRIEVABLE TYPE,FOR
H2S,CO2,HYDRAULIC SET ACTIVATI,6.000 IN OD,3.875 IN ID,7 IN OD,2629LB/FT,5.250-4TPI LEFT HAND SQUARE THREAD (TOP) X 4-1/2 IN, 12.6LB, L-80
NEW VAM PIN DOWN CONNECTN,12.6 LB/FT (BOTTOM),LEFT-HANDSQUARE
THREAD (TOP) NEW VAM PIN (DOWN) COONECTN,6,000 PSISUPPLY,NACE
MR0175,CARBON STEEL 4140 FLOW WETTED NITRILEELASTOMERKIT
COMPONENTS
1000742277
HANGER,LINER,7X95/8,VTHC,32#,C95,HYD
PACKER,PROD,7X41/2,NVAM,12.6#,L80,RET
Saudi Aramco: Company General Use
102
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
436
Drilling Equipment
(Downhole
Equipment)
437
Drilling Equipment
(Advanced Well
Completion
Equipment)
438
439
2015
Material Description
Material Long Description
VALVE; SAFETY, TUBING RETRIEVABLE TYPE,SIZE 7 IN 32 LB/FT,10000PSI
SUPPLY,NICKEL ALLOY 718 120 MYS BODY,API-14A,NACE MR-01-75/ISO 15156
MONOGRAMMED,MIN ID: 5.812 IN, ONYX SAFETY VALVE ID:5.860 IN, MAX OD:
9.200 IN, TYPE OF SERVICE: CO2 & H2S & CL,SELF EQUALIZING TYPE
VALVE,SAFETY,7",VTHC,10K,718, CONNECTION: 7 IN 32 LB/FT VAM TOP HC BOX XPIN, TOP NIPPLE ADAPTOR
PROFILE: 5.812 IN RPT, BOTTOM SEAL BOREID: 5.812 IN, TENSILE: 877.000 LBS,
TRSSSV
TEMPERATURE RATING: 20 TO350 DEG F, WORKING PRESSURE ABOVE: 10000 PSI,
EQUALIZINGPRESSURE: 10000 PSI, FLAPPER LOCK OPEN PRODUCT
NUMBER:H822805801, COMMUNICATION TOOL PRODUCT NUMBER:
H822815803,INSERT TOOL PRODUCT NUMBER: H825535810KIT COMPONENTS
PDHMS,3-1/2,EUE,DUAL
GAUGE,P+T
ASSEMBLY; MONITORING, DOWN HOLE TYPE,3-1/2 IN, DUAL, PERMANENTKIT
COMPONENTS
CENTRALIZER CASING; SLIP-ON, SOLID BODY, SPIR-O-LIZERBLADERUNNER TYPE,7
IN X 8-1/2 IN CASING,8-1/4 IN BOW OD,STYLE5-BLADE, SPIRAL,INTERNAL DIA.: 71/8 INCH, WALL THICKNESS: 3/16INCH, LENGTH: 10 INCH, WEIGHT: 6.10 KG,
BLADES: 5 X SPIRAL,BLADE ANGLE: 25O, BLADE LEAD IN: 2-1/2 INCH, BLADE LEAD
OUT:1-1/2 INCH, MATERIAL: ZINC ALLOY & TEFLON, USE WITH 2 EACHDUCTILE
IRON SPIR-O-LOK STOP COLLARS, WITH MATERIAL NUMBER1000XXXXX, ITEMS
Drilling Equipment
(Casing Accessories & CENTRALIZER,7",BLADERUNNER, MUST BE BOXED AS AN INDIVIDUAL UNIT FORSHIPMENT AND STORAGE PER
SAUDI ARAMCO PACKAGING SPEC 844418.MANUFACTURER MUST BAR CODE
Cementing
8.250"OD
IDENTIFY EACH ISSUE UNIT ON BOTH THEMATERIAL AND OUTSIDE THE
Equipment)
CONTAINER IN WHICH THE ISSUE UNIT ISCONTAINED. CODE TO BE IN THE
INTERNATIONAL CODE 39 BAR CODINGSYSTEM FORMAT AND ADHERE TO ANSI
MH10.8 ( LATEST EDITION)SPECIFICATION (LESS SECTIONS 12 & 13). BAR CODE
TAG MUST INCLUDETHE SAUDI ARAMCO STOCK NUMBER ANDBE PURCHASE
ORDER NUMBER.BF
Drilling Equipment
(Downhole
Equipment)
WHIPSTOCK,9-5/8,8,3658.4,HYD,PKR,1.98DG
WHIPSTOCK; HYDRAULIC SET TYPE,8 IN OD BODY STD,ONE TRIP
WITHRETREIVABLE PACKER, 14 FT SLIDE WITH 1.98-DEGREE WHIP FACETRIP,9-5/8
IN OD CSNG DRE,36-58.4 LB/FT CSNG DRE,CONNECTION:TOP: SHEAR BOLT,
BOTTOM: BULL NOSE, PRESSURE RATING: 5,000 PSI,MATERIAL GRADE: MODIFIED
4145 WITH 40 RC, PACKER MATERIAL: 80DURO NITRILE, RETREIVING METHOD:
HOOK OR DIE COLLAR
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000824001
1000754845
1000803581
1000762313
103
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
440
441
442
2015
Category
Material Description
Material Long Description
COLLAR, PACKER: INFLATIBLE, CEMENTING, MULTI STAGE, C-95 OR EQUIVALENT
CASING, 13-3/8 IN INSIDE OD, W/ 3 FT ELEMENT. COLLAR PACKER; INFLATIBLE
TYPE,FOR CEMENTING,MULTI STAGE,C-95 OR EQUIVALENT CASING,13-3/8 IN
INSIDE O,61-72 LBS/FT,18-5/8 IN. OUTSIDE,115 LBS/FT OUTSIDE,VAM TOP
TERMINAL,15.25 IN. TOOL OD,12.359 IN. DRILL OU,18.5 IN. EXPANSIO,API
Drilling Equipment
5B,EACH PACKER COLLAR MUST BE BOXED AS AN INDIVIDUL UNIT FOR SHIPMENT
(Casing Accessories & DV TOOL,13-3/8",VAM TOP,61AND STORAGE, THIS DV PACKER DOES NOT HAVE PLUG SET INCLUDED WITH IT.
Cementing
72#,C95,3FT
ALSO, NO HANDLING SUB IS REQUIRED. COMPLETE ASSEMBLY MUST BE ##BOXED
Equipment)
AS AN INDIVIDUL UNIT WITH ITS COMPONENTS. KITS COMPONENTS............ ITM
01, QTY 01, DESCRIPTION COLLAR: PACKER, INFLATABLE, CASING SIZE: 13-3/8" 6172 THREADS : VAM TOP TOOL LENGTH : 56.8 IN TOOL OD : 15.25 IN DRILL OUT ID
: 12.359 IN MAX HOLE SIZE: 18.50 IN MATERIAL : C-95 OR EQUIVALENT. P/N
101321539
COLLAR: PACKER; INFLATABLE; MODEL (781 POST), F/18-5/8" 115 LBS/FT CSG,
W/BTC THD, BOX X PIN, W/4 FT ELEMENT COLLAR PACKER; INFLATABLE TYPE,FOR
Drilling Equipment
CEMENTING,MULTI STAGE,L-80 CASING,18-5/8 IN INSIDE O,115 LBS/FT,24 IN
(Casing Accessories &
DV TOOL,18OUTSIDE,176 LBS/FT OUTSIDE,BTC BOX & BTC PIN THD TERMINAL,21.625 IN TOOL
Cementing
5/8",BTC,115#,L80,MEC,4FT OD,17.251 IN DRILL OU,22.25 IN EXPANSIO,FREE FALL PLUG SET PLUG 2ND,API
Equipment)
5B,EACH TOOL MUST BE BOXED AS INDIVIDUAL UNITS FOR SHIPMENT AND
STORAGE. PACKED TO ARAMCO SPECS. PACKING SPEC 844418 APPLIES KITS
COMPONENTS
CENTRALIZER CASING; BLADE RUNNER TYPE,7 IN X 8-3/8 IN (OD 8-1/8 IN)
Drilling Equipment
(Casing Accessories & CENTRALIZER,7",BLADERUNNER, CASING,TYPE: SOLID BODY, SLIP ON. BLADES: 5 X SPIRAL RIGHT HAND. MATERIAL:
ZINC-ALLOY/TEFLON. WEIGHT (KG): 5.80. FLOW-BY (SQ INS): 10.72.
Cementing
8.125"OD
MANUFACTURING PROCESS: DIE CAST.
Equipment)
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000648892
1000609477
1000886162
104
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
443
2015
Category
Drilling Equipment
(Downhole
Equipment)
Material Description
Material Long Description
VALVE; INTEGRATED HVC CHOKE AND ACCUPULSE TYPE,SIZE 3-1/2 IN,7,500 PSI
SUPPLY,3-1/2 9.2# NEW VAM BOX X PIN END CONN,CASING SIZE: 7 IN. 20-32#,
MAXIMUM OD: 5.865 IN, MINIMUM ID: 2.750 IN, LENGTH: 130.25 IN, 3-1/2 9.2#
NEW VAM CONNECTION TORQUE (FT-LBS):4,300 MIN, 4,770 OPT., 5,240 MAX,
HVC CONNECTION: 3-1/2 10.2# NS-CT B X P THD, 3-1/2 10.2# NS-CT CONNECTION
TORQUE(FT-LBS): 3,070 MIN, 3,430 OPT., 3,790 MAX, SERVICE: STD/H²S/CO², MAX
WORKING TEMP :275°F, WORKING PRESSURE INTERNAL: 7,500 PSI, WORKING
PRESSURE EXTERNAL: 7,500 PSI, TEST PRESSURE INTERNAL: 8,000 PSI, TEST
PRESSURE EXTERNAL: 8,000 PSI, MAX. HYDRAULIC PRESSURE: 10,000 PSI,
WORKING HYDRAULIC PRESSURE: 7,500 PSI, MAX. DIFF UNLOADING PRESSURE:
5,000 PSI, MAX. DIFF BETWEEN ACCUPULSE CHAMBER AND ANNULUS: 5,000 PSI,
HVC CHOKE: 214HVC350034, ACCUPULSE: 213AP1350003, HVC METALLURGY: INC
718, FITTING KIT METALLURGY: INC 718 / 4140, ACCUPULSE METALLURGY: INC
VALVE,ICV,3718, FASTENER METALLURGY: 300 SS / INC 718, CLAMP BOLT SIZE (ON ANCHOR
1/2",NVAM,9.2#,718,7.5K,HVC PROTECTOR) (ON ACCUPULSE): 3/8 - 16, ½ - 13, CLAMP BOLT TORQUE (ON
ANCHOR PROTECTOR) (ON ACCUPULSE): 50 FT-LBS, 20 FT-LBS, ELASTOMERS
F/HYD. CHAMBER: V-RINGS E081 (PTFE), O-RINGS (CHEMRAZ), BACK UP RINGS
E080 (PEEK), ELASTOMERS F/ WELLBORE FLUID: BACK UP RINGS E080 (PEEK), ORINGS (CHEMRAZ), PISTON AREA: 2.075 SQ. IN, TOTAL STROKE: 6.00 IN, HYD
CHAMBER DISPLACEMENT: 12.45 CU. IN, TENSILE RATING: 310,000 LBF,
COMPRESSIVE RATING: 200,000 LBF, MIN. INTERNAL FLOW AREA: 5.94 SQ.IN,
FLOW AREA BETWEEN OD OF HVC AND ID OF 7 IN. 32# CASING (6.094 ID): 4.83
SQ IN, TOTAL(2.68 SQ. IN. DUE SLOTS), FLOW TRIM CHOKE SETTINGS BASED ON
TOOL ID OF 2.75: 11 POSITIONS (1 X FULLY OPEN, 1 X FULLY CLOSED, 9 X FIXED)
0%, 3%, 4%,6%, 10%, 14% 19%,24%, 43%, 83%, 116%, COIL TUBING SHIFTING
TOOL: 290HM0275000, SPAECIAL NOTES: 2 BYPASS SLOTS, ASSY PICTORAL/ BOM
DRAWING: 312557-10-01, TECH DOC: 312025-00-01
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000780057
105
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
444
2015
Category
Drilling Equipment
(Downhole
Equipment)
Material Description
Material Long Description
Material Number
9COM/9CAT
PACKER,PROD,7X31/2,NVAM,9.2#,41XX,FTHRU
PACKER PRODUCTION; MULTI-PORT, HYDRAULIC SET, RETRIEVABLEMILLABLE
TYPE,HYDRAULIC SET ACTIVATI,5.992 IN OD MAX. OD,2.940IN ID MIN. WITH 0.350
IN. OFFSET ID,7.000 IN OD,26-29LB/FT,3-1/2 IN. 2.9 PPF NEW VAM BOX X PIN
CONNECTN,2.9 PPF (TOP)X 2.9 PPF(BOTTOM),NEW VAM BOX X PIN
COONECTN,5,000 PSI IWPSUPPLY,EXTERNAL WP: 5000 PSI @ 250OF, DRIFT ID:
2.920 IN,MATERIALS: ELASTOMERS: NITRILE, ELEMENTS: CENTER: HNBR
(80DURO), END: HNBR (90 DURO)/316SS WIRE MESH FLOW WETTED:4130/4140
O-RINGS: HNBR (90 DURO) TEMP. RATING: 250OF THISMULTI-PORT PACKER
NEEDS 3,000 TO 3,500 PSI PRESSURE DIFFERENTIALAT THE PACKER AGAINST A
PLUG LOCATED BELOW THE SETTING PORTS OFTHE PACKER. THE HYDRAULIC
PRESSURE ENTERS A PORT IN THE MANDRELRELEASING THE TRIPPING PISTON
AND UNLOCKING THE ANTI-PRESETMECHANISM. A FURTHER INCREASE IN
TUBING PRESSURE SHEARS THESHEAR PINS IN THE LOWER CONE, ALLOWING
PISTON TO STROKE THESEALING ELEMENT WHILE WHILE THE SLIPS REMAIN
RETRACTED. SETTINGIS COMPLETED WHEN SUFFICIENT FORCE IS APPLIED TO
ANCHOR THEUPPER TEETH, THEN THE LOWER TEETH OF THE SLIPS. THE
RACHETRINGRETAINS THE SETTING FORCE. ALL SETTING CHAMBERS ARE
ISOLATEDBELOW THE PACKING ELEMENT SYSTEM- THIS ELIMINATES THE
POTENTIALFOR A LEAK PATH THROUGH THE SETTING MECHANISM. APPLYING
STRAIGHTPULL RETRIEVES THE PACKER. WHEN THE TENSION REACHES THE
PRESETVALUE AT THE PACKER, THE SHEAR RING IS SHEARED ALLOWING
THEMANDREL TO MOVE UPWARD AND THE OUTER PARTS OF THE PACKER
TORELAX FROM THE CASING WALL. SUBSEQUENT PULL WILL STROKE THEOUTER
PARTS, PERMITTING THE RETRIEVAL OF THE PACKER.
1000782736
Saudi Aramco: Company General Use
106
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
445
446
447
Category
Drilling Equipment
(Downhole
Equipment)
Drilling Equipment
(Downhole
Equipment)
Drilling Equipment
(Advanced Well
Completion
Equipment)
Material Description
Material Long Description
Material Number
9COM/9CAT
PACKER,PROD,7X41/2,NVAM,12.6#,S13CR,RET
PACKER, PRODUCTION: "PREMIER",RETRIEVABLE, H2S, HYDRAULIC SET, 5.875IN
OD, 3.875 IN ID, 7 IN CASING OD,PACKER PRODUCTION; "PREMIER", RETRIEVABLE
TYPE,FOR H2S,HYDRAULICSET ACTIVATI,5.875 IN OD,3.875 IN ID,7 IN OD,23-26
LB/FT,4-1/2IN (TOP) X 4-1/2 IN (BOTTOM) CONNECTN,12.6 LB/FT,NEW VAM
BOX(TOP) X PIN (BOTTOM) COONECTN,7,500 PSI SUPPLY,NACE-01-75,L-80PACKER
AND PBR MATERIAL, 9CHROME-1MOLY SEAL ASSEMBLY MATERIAL ASPER NACE01-75, 18-22 RC, PACKER NITRILE ELASTOMER.PACKER, PRODUCTION:
"PREMIER",RETRIEVABLE, H2S, HYDRAULIC SET, 5.875IN OD, 3.875 IN ID, 7 IN
CASING OD,PACKER PRODUCTION;"PREMIER", RETRIEVABLE TYPE,FOR
H2S,HYDRAULICSET ACTIVATI,5.875 IN OD,3.875 IN ID,7 IN OD,23-26 LB/FT,41/2IN (TOP) X 4-1/2 IN (BOTTOM) CONNECTN,12.6 LB/FT,NEW VAM BOX(TOP) X
PIN (BOTTOM) COONECTN,7,500 PSI SUPPLY,NACE-01-75,L-80PACKER AND PBR
MATERIAL, 9CHROME-1MOLY SEAL ASSEMBLY MATERIAL ASPER NACE-01-75, 1822 RC, PACKER NITRILE ELASTOMER.
1000669724
CONNECTOR,HYD,4-1/2,WET
MATE,2PORT,AFLAS
PDHMS,4-1/2,NVAM,DUAL
GAUGE
448
Drilling Equipment
(Downhole
Equipment)
PACKER,PROD,7X41/2,VTHC,15.1#,S13CR
449
Drilling Equipment
(Downhole
Equipment)
PACKER,PROD,7X41/2,NVAM,12.6,#,4140,HYD
2015
LINE; HYDRAULIC LINE TYPE,SIZE 4-1/2 INCH,AFLAS,4 1/2 INCHHYDRAULIC LINE
WET MATE CONNECT SYSTEMKIT COMPONENTS
ASSEMBLY; MONITORING TYPE,PERMANENT DOWNHOLE, DUAL, 4-1/2 IN KIT
COMPONENTS
PACKER PRODUCTION; ONE TRIP COMPLETION TYPE,FOR
CO2,HYDRAULICACTIVATI,5.750 IN OD,3.743 IN ID,7 IN OD,32 - 35 PPF,4-1/2
INCONNECTN,15.10 PPF,VAM TOP HC BOX-PIN COONECTN,100 - 300 DEG F,9020
PSI SUPPLYKITS COMPONENTS
PACKER PRODUCTION; 'QHSB' TYPE,FOR H2S, CO2,HYDRAULIC SET ACTIVATI,5.875
IN OD,3.875 IN ID,7 IN OD,26-29 LB/FT,5.250-4TPI LEFT HAND SQUARE THREAD
(TOP) X 4-1/2 IN 12.6# L-80 NEW VAM PIN DOWN CONNECTN,12.6 LB/FT
(BOTTOM),LEFT-HAND SQUARE THREAD (TOP) COONECTN,6,000 PSI
SUPPLY,NACE MR 01-75,CARBON STEEL 4140 FLOW WETTED AFLAS ELASTOMER
KIT COMPONENTS
Saudi Aramco: Company General Use
1000888235
1000757804
1000840278
1000731568
107
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Material Description
Material Long Description
Material Number
9COM/9CAT
450
Drilling Equipment
(Casing Accessories &
Cementing
Equipment)
DV TOOL,9-5/8",LTC,3640#,L80,MEC
COLLAR: PACKER; INFLATABLE; MODEL (781 POST) F/9-5/8 IN. OD 36 TO 40 LB/FT
CASING; W/API 5B LTC THREAD COLLAR PACKER; INFLATABLE TYPE,FOR
CEMENTING,MULTI STAGE,L-80 CASING,9-5/8 IN INSIDE O,36-40 LB/FT,13-3/8 IN
OUTSIDE,61.0-72.0 LB/FT OUTSIDE,8RD LTC BOX & LTC PIN THD TERMINAL,11-3/4
IN TOOL OD,8.75 IN ID DRILL OU,16 IN EXPANSIO,BOTTOM PLUG 1ST,FREE FALL
PLUG 2ND,API 5B,FREE FALL PLUG SET CONSISTS OF SHUT-OFF BAFFLE & PLUG
AND FREE FALL OPENING CONE & CLOSING PLUG, PACKED TO CUSTOMER SPECS
PACKING SPEC 844418 APPLIES KITS COMPONENTS
1000022888
451
Drilling Equipment
(Downhole
Equipment)
KIT,TIEBACK,95/8",VTOP,53.5#,TBR,MDISK
Item
Category
452
Drilling Equipment
(Downhole
Equipment)
COUPLING,FLOW,41/2,VTHC,9CR1MO,3.731"ID
453
Drilling Equipment
(Downhole
Equipment)
PACKER,PROD,9-5/8X31/2,NVAM,9.2#,FTHRU
2015
PACKER PRODUCTION; 9-5/8 IN, 53.5 PPF X 14 IN, 114 PPF, 10K PSI BAKER LINER
TOP PACKER ASSEMBLY. KIT COMPONENTS
COUPLING: FLOW, KHUFF, 4-1/2 IN 15.10 LB/FT, 9% CHROMIUM - 1%
MOLYBDENUM, API 5CT, API 5C2, NACE MR-01-75 (LATEST COUPLING; FLOW,
KHUFF TYPE,SIZE 4-1/2 IN 15.10 LB/FT,9% CHROMIUM - 1% MOLYBDENUM,API
5CT,API 5C2 NACE,MR-01-75 (LATEST EDITI,5.041" OD X 3.731" ID X 5' LG, VAM
TOP HC BOX X PIN THD, H2S & CO2 SERVICE, BURST PRESSURE: 10,480 PSI,
(CALCULATED) COLLAPSE PRESSURE: 11,080 PSI, (CALCULATED) PRESSURE
RATING: 9,600 PSI.
PACKER PRODUCTION; MULTI-PORT, HYDRAULIC SET, RETRIEVABLE MILLABLE
TYPE,HYDRAULIC SET ACTIVATI,8.445 IN OD MAX. OD,2.940 IN ID ID,9-5/8 IN
OD,43.5-47 LB/FT,3-1/2 IN. 9.2 PPF NEW VAM BOX (TOP) X 3-1/2 IN. 9.2 PPF NEW
VAM PIN (BOTTOM), CONNECTN,9.2 PPF X 9.2 PPF(TOP X BOTTOM),NEW VAM
BOX X PIN COONECTN,5,000 PSI IWP SUPPLY,EXTERNAL WP: 5000 PSI @ 250OF,
DRIFT ID: 2.925 IN, MIN. ID: 2.935 IN, MATERIALS: ELASTOMERS: NITRILE,
ELEMENTS: NITRILE FLOW WETTED: 4130/4140, O-RINGS: NITRILE, TEMP.
RATING: 250OF MAX. HYDROSTATIC PRESS.: 4200 PSI MAX. @ 250OF OA LENGTH:
98 IN. SETTING DIFF. PRESS.: 3800 PSI MIN. THIS MULTI-PORT PACKER NEEDS
3,000 TO 3,500 PSI PRESSURE DIFFERENTIAL AT THE PACKER AGAINST A PLUG
LOCATED BELOW THE SETTING PORTS OF THE PACKER. APPLYING STRAIGHT PULL
RETRIEVES THE PACKER. WHEN THE TENSION REACHES THE PRESET VALUE AT
THE PACKER, THE SHEAR RING IS SHEARED ALLOWING THE MANDREL TO MOVE
UPWARD AND THE OUTER PARTS OF THE PACKER TO RELAX FROM THE CASING
WALL. SUBSEQUENT PULL WILL STROKE THE OUTER PARTS, PERMITTING THE
RETRIEVAL OF THE PACKER.
Saudi Aramco: Company General Use
1000830500
1000648887
1000782735
108
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
454
Drilling Equipment
(Casing Accessories &
Cementing
Equipment)
455
Drilling Equipment
(Downhole
Equipment)
456
457
458
2015
Material Description
Material Long Description
DV TOOL,95/8",NK3SB,53.5#,110,HYD
CEMENTER; HYDRAULIC TYPE,9-5/8 IN OD,53.5 PPF WT,TENARIS HYDRIL
3SB,11.700 IN TOOL OD,8.500 IN DRILL OD,9-5/8 IN X 13-3/8 IN, 86 PPF
HYDRAULIC MID STRING ZX PACKER TWO STAGE CEMENTING SYSTEM WITH PAC
VALVE SYSTEM KIT COMPONENTS
1000885435
HANGER,LINER,16X185/8,ABF,84#,L80,HYD
HANGER LINER; HYDRAULIC ACTIVATI,GR L-80,16 IN END 1,84 PPF END 1,18-5/8
IN END 2,87.5 PPF END 2,ANTARES BIG FLUSH,TIW IB-TC R HYDRO-HANGER
ASSEMBLY WITH LX LINER PACKER WITH RPOB AND HD CEMENT MANIFOLD FOR
16 IN 84 PPF BY 18-5/8 IN 87.5 PPF LINER. KIT COMPONENTS
1000882677
HANGER LINER; HYDRAULIC ACTIVATI,7 IN END 1,32 PPF END 1,9-5/8 IN END
2,58.4 PPF END 2,7 IN, 32 PPF VAM TOP HC BOX DOWN END CONN,7 IN X 9-5/8
IN 58.4 PPF LOWER COMPLETION FOR HASBAH. MATERIAL: NICKLE ALLOY 625
PLUS. KIT COMPONENTS
NIPPLE, LANDING: TYPE R, 9% CHROMIUM - 1% MOLYBDENUM, 80K, H2S AND
CO2, API 14L/ISO 16070, API Q1/ISO 9001. NIPPLE LANDING; R TYPE,9%
CHROMIUM - 1% MOLYBDENUM,80K,FOR H2S & CO2,API 14L/ISO 16070, API
Drilling Equipment
NIPPLE,LANDING,4Q1/ISO 9001 COONECTN,POLISHED BORE,3.688 IN ID,5.041 OD,18.37 IN LG,4-1/2
(Downhole
1/2",VTHC,R,3.688"ID
IN TUBING OD,15.10 LB/FT,VAM TOP HC BOX X PIN,API 14L/ISO 16070, API
Equipment)
Q1/ISO 9001,MADE TO NACE MR-01-75 (LATEST EDITION), BURST PRESSURE:
10,480 PSI (CALCULATED) COLLAPSE PRESSURE: 11,080 PSI (CALCULATED)
PRESSURE RATING: 9,600 PSI
COLLAR: PACKER; INFLATABLE; MODEL (781 POST) F/9-5/8 IN OD 53.5 LB/FT
CASING, W/4 FT ELEMENT, NK-3SB THD, BOX X PIN COLLAR PACKER; INFLATABLE
TYPE,FOR CEMENTING,MULTI STAGE,T-95HCHS CASING,9-5/8 IN INSIDE O,53.5
Drilling Equipment
DV TOOL,9LB/FT,13-3/8 IN OUTSIDE,86 LB/FT OUTSIDE,NK-3SB BOX & NK-3SB HC PIN THD
(Casing Accessories &
5/8",NK3SB,53.5#,T95HCHS,MEC, TERMINAL,11.75 IN TOOL OD,8.50 IN ID DRILL OU,15.50 IN EXPANSIO,API
Cementing
4
5B,EACH POST TOOL MUST BE BOXED AS INDIVIDUAL UNTS FOR SHIPMENT AND
Equipment)
STORAGE THIS TOOL DOES NOT HAVE A PLUG SET WITH IT. PACKED TO SAUDI
ARAMCO SPECS. PACKING SPEC 844418 APPLIES KITS COMPONENTS
Drilling Equipment
(Downhole
Equipment)
Material Number
9COM/9CAT
HANGER,LINER,7X95/8,VTHC,32#,625,HYD
Saudi Aramco: Company General Use
1000891392
1000648889
1000609476
109
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
459
460
2015
Category
Drilling Equipment
(Downhole
Equipment)
Material Description
HANGER,LINER,41/2X7,VTHC,13.5,41XX,32#
Material Long Description
HANGER LINER; 4-1/2 IN END 1,13.5 LBS END 1,7 IN END 2,29-32 LBS END 2,VAM
TOP HC END CONN,VLH BDY ASSY ,5,7,29-32,87 OD,VTN LINER HANGER TYPE :
STANDARD CASING SIZE : 7 CASING WEIGHT : 29.0:32.0 MATERIAL : 41XX LOW
ALLOY STEEL ELEMENT MATERIAL : RUBBER TEMPERATURE RATING SERVICE : 40
TO 275 SERVICE : STD BOTTOM THREAD : 5- 18.00 VAM TOP-HT CONNECTION
TYPE : PIN BOTTOM THREAD MAKE-UP TORQUE : 10500( OPTIMUM) (FT-LBS):
9500( MINIMUM), : 11500(MAXIMUM) FOR 5-18.00 VAMTOP-HC MAKE-UP
TORQUE ,LINER HANGER : 1700 (MINIMUM) 1865(OPTIMUM) BODY #UPPER (FTLBS) 2035 (MAXIMUM) FOR 5.607 HST-DS MAKE #UP TORQUE,LINER : 4850 (
MINIMUM) HANGER : 5340 ( OPTIMUM) BODY-LOWER (FT- LBS) : 5820
(MAXIMUM) FOR 5.366 HST-DS MAKE-UP TORQUE, SETTING : 4850 ( MINIMUM)
SLEEVE- UPPER ( FT-LBS) : 5340 (OPTIMUM) FOR 5.366 HST-DS MAKE #UP
TORQUE,SEETING : 5300( MINIMUM) SLEEVE-LOWER (FT- LBS : 5840(OPTIMUM ) :
6360(MAXIMUM) : FOR 5.366 HST-DS MAXIMUM OD : 5.885 INCH 149.479MM
MAXIMUM OD REMARKS : UPPER SETTING SLEEVE MAXIMUM OD (TIE-BACK
RECEPTACLE : 5.880 IN 149.352 MM NOMINAL OD ( ELASTOMERS) : 5.870 INCH
149.098MM ID-MIN (TIE-BACK RECEPTACLE) : 5.246 IN 133.248 MM SEAL BORE
LENGTH-MAX(TIEBACK RECEPTACLE : 94.996 IN 241.29 CM MAXIMUM OD (
SETTING SLEEVE ) : 5.885 INCH 149.479 MM NOMINAL ANNULAR BYPASS :
2.973(7, 29), AROUND : 2.105(7,32) LINER HANGER (SQ.INCHES) : MINIMUM ID :
4.213 INCH 107.01 MM MINIMUM ID REMARKS : LOWER SETTING SLEEVE
NOMINAL LENGTH : 255.31 INCH SETTING PRESSURE : 6829 PSI (7,29), : 5752 PSI
(7,32) BURST PRESSURE ABOVE : 8191 PSI 56475 KPA ELASTOMERS (CALC) BURST
PRESSURE ABOVE ELASTOMERS REMARKS: PBR WALL OF BODY COLLAPSE
PRESSURE ABOVE ELASTOMERS (CALC) : 7821 PSI 53924 KPA COLLAPSE PRESSURE
ABOVE ELASTOMERS REMARKS : PBR WALL OF BODY TENSILE RATING ABOVE
ELASTOMERS (CALC) : 178054 POUND 80764 KPA TENSILE RATING ABOVE
ELASTOMERS REMARKS: BODY UPPER THREADS BURST PRESSURE BELOW
ELASTOMERS CALC : 9377 PSI 64652 KPA BURST PRESSURE BELOW ELASTOMERS
REMARKS : BODY LOWER THREADS COLLAPSE PRESSURE BELOW ELASTOMERS
(CALC)
70761
KPA COLLAPSE
PRESSURE
BELOW ELASTOMERS
COLLAR: 10263
CASINGPSI
STOP;
SLIP-ON,
SPIR-O-LOK,
7 IN TYPE,FOR
POSITIONING REMARK
Drilling Equipment
(Casing Accessories & COLLAR,STOP,7",SLIPON,2.000", CENTRALIZERS,INTERNAL DIA.: 7.125 INCH, OUTSIDE DIA.: 8.00 INCH, LENGTH: 2
INCH, NO. OF SCREWS: 8 EACH, SIZE OF SCREW: 1/2 INCH DIA., MATERIAL: CAST
Cementing
DHP
DUCTILE IRON, FOR 7" X 8-1/2" SPIR-O-LIZER CENTRALIZER,
Equipment)
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000828970
1000803586
110
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
Material Description
461
Drilling Equipment
(Downhole
Equipment)
PBR/SEAL,41/2",VTOP,15K,41XX,30 FT
462
463
2015
Drilling Equipment
(Downhole
Equipment)
Drilling Equipment
(Downhole
Equipment)
Material Long Description
Material Number
9COM/9CAT
SEAL; LOWER PBR TYPE,SIZE 4-1/2 IN,41XX LOW ALLOY STEELKIT COMPONENTS
1000898876
HANGER,LINER,7X95/8,NVAM,26#,47-53.5#
HANGER LINER; MECHANICAL ACTIVATI,FOR STD,7 IN 26# NEW VAM END
CONN,MAXIMUM OD (ELASTOMERS) 8.325 IN ID-MIN (TIE-BACK
RECEPTACLE)116.50 IN MAXIMUM OD (SETTING SLEEVE)8.325 IN MAXIMUM ID
6.745 IN MINIMUM ID REMARKS,SETTING SLEEVE NOMINAL LENGTH 346.6 IN
SETTING PRESSURE 3902(47 LBS),2792(53.5 LBS) BURST PRESSURE ABOVE
ELASTOMERS(CLAC)6483 BURST PRESSURE ABOVE ELASTOMERS REMARKS PBR
WALL OF BODY COLLAPSE PRESSURE ABOVE ELASTOMERS (CALC)4530 PSI
COLLAPSE PRESSURE ABOVE ELASTOMERS (CALC) PBR TENSILE RATING ABOVE
ELASTOMERS (CALC)30865 LNR HGR BDY ASSY, VLH, POUND 7-5/8,9-5/8,53.5-47.
LINER TENSILE RATING ABOVE ELASTOMERS (CALC) HANGER TYPE,STANDARD
CASING BODY UPPER THREAD SIZE 9-5/8,9-7/8. BURST MATERIAL,41 XX LOW
ALLOY PRESSURE BELOW ELASTOMERS STEEL. ELEMENT (CALC) 8761 PSI
MATERIAL,FLUOROCARBON BURST RUBBER. PRESSURE BELOW ELASTOMERS
TEMPERATURE RATING 40:275. REMARK 7.583 HST-DS BOX SERVICE THRAD
COLLAPSE PRESSURE STD BELOW ELASTOMERS(CALC)8340 BOTTOM THREAD
7.5/8-33.70 NEW VAM. PSI . COLLAPSE PRESSURE CONNECTION TYPE PIN BELOW
ELASTOMERS REMARKS BOTTOM THREAD MARK-UP (CALC). TORQUE (FT-LBS)
12700(MINIMUM),14100. BOTTOM THREADS (OPTIMUM),15500(MAXIMUM)FOR
7"IN 26# NEW VAM PIN 7-5/8-33.7 NEW VAM . TENSILE RATING BELOW ELAS
MAXIMUM OD 8.375 IN MAXIMUM OD REMARKS GAUGE RING OD MAXIMUM
OD (TIE-BACK RECEPTACLE)8.325 IN
1000791668
PACKER,SWELL,41/2X8.50"OH,SLIPON
PACKER PRODUCTION; RESPACK TYPE,SWELLABLE ACTIVATI,8.150 INOD,5.654 IN
ID,5.5 IN OD,OPEN,OPEN CONNECTN,OPEN,OPENCOONECTN,OPEN HOLE SIZE:
8.500 IN. PACKER LENGTH: 18 IN.EXTERNAL ELEMENT THICKNESS (SWELLING
RUBBER): 1.166 IN. SUPPORTTUBE THICKNESS (CARBON STEEL): 0.100 IN. INNER
ELEMENT THICKNESS(SWELLING RUBBER): 0.180 IN. END RING LENGTH: 1.750 IN.
END RINGOD: 8.150 IN. END RING ID: 5.579 IN.
1000875949
Saudi Aramco: Company General Use
111
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
464
2015
Category
Drilling Equipment
(Downhole
Equipment)
Material Description
Material Long Description
Material Number
9COM/9CAT
HANGER,LINER,7X95/8,NVAM,26#,L80,HYD
HANGER LINER; HYDRAULIC ACTIVATI,GR L-80 & P-110 CASING,7 IN END 1,26
LB/FT END 1,9-5/8 IN END 2,36-43.5 LB/FT END 2,NEW VAM END CONN,SMITH
SERVICE 7 IN HYDRAULIC SET LINER HANGER, SIZE 7 IN. 26# X 9-5/8 IN. 36-43.5#
MODEL "HCDC" HYDRAULIC SET LINER HANGER WITH "SATM" SETTING ADAPTER,
6 FT LONG TIE-BACK RECEPTACLE. CONSIST OF: ITEM NO. QUANTITY DESCRIPTION
01 01 MODEL #HCDC# SOLID BODY, DUAL CONE HYDRAULIC SET LINER HANGER,
7 IN. 26# NEW VAM BOX X PIN.HANGER O.D. 8.250 IN. I.D. 6.276 IN. L-80
MATERIAL. FIELD ADJUSTABLE SHEAR: 1220-3000 PSI PART NUMBER:
HCDC373601044LE 02 01 MODEL #BC# BALL SEAT LANDING COLLAR WITH 7 IN.
26# NEW VAM BOX X PIN CAST IRON BALL SEAT, L-80 MATERIAL. FIELD
ADJUSTABLE SHEAR: 1200-3000 PSI. PART NUMBER: BC44997044LE 03 01 MODEL
#FC# FLOAT COLLAR WITH 7 IN. 26# NEW VAM BOX X PIN, SINGLE FLAPPER VALVE
CAST IRON INSERT, L-80 MATERIAL. PART NUMBER: FC4498949044LE 04 01
MODEL #FS# FLOAT SHOE WITH 7 FT. 26# NEW VAM BOX, DOUBLE FLAPPER
VALVE CAST IRON INSERT, L-80 MATERIAL. PART NUMBER: FS44989590044LE 05
01 MODEL #LWPC# LINER WIPER PLUG WITH ANTI ROTATIONAL LOCK NOSE, PDC
DRILLABLE, MATERIAL NITRILE, ALUMINIUM T-6061. PART NUMBER:
LWPC49004N 06 01 MODEL #PDPC# DRILL PIPE PUMP DOWN PLUG WITH ANTI
ROTATIONAL LOCK NOSE, PDC DRILLABLE SUITABLE FOR 5 IN. 19.5# DRILL PIPE.
MATERIAL NITRILE ALUMINIUM T-6061. PART NUMBER: PDPC50004N
1000771959
Saudi Aramco: Company General Use
112
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
465
2015
Category
Drilling Equipment
(Downhole
Equipment)
Material Description
Material Long Description
Material Number
9COM/9CAT
HANGER,LINER,41/2X7,TB,15.2#,125,HYD
HANGER LINER; HYDRAULIC ACTIVATI,4 1/2 INCH END 1,15.2 PPF END1,7 INCH
END 2,35 PPF END 2,TENARIS BLUE END CONN,4 1/2 INCH,15.2 PPF, TENARIS
BLUE PIN X PIN.,4 1/2 INCH BAKER LINER HANGEREQUIPMENT FOR DEEP GAS
EXPLORATION WELLS, CONSISTING OFFOLLOWING: 1) LINER HANGER ASSEMBLY :
4 1/2 INCH, 15.2 PPF X 7INCH, 35 PPF, MODEL FLEX-LOCK III, AS FOLLOWS: 1.01
(QTY 1)BAKER HYDRAULIC SET MODEL 'FLEX-LOCK III. SIZE : 4 1/2 INCH,15.2 PPF X
7 INCH, 35 PPF. MAX OD : 5.625 INCH. MIN ID :3.800INCH. MIN DRIFT ID : 3.750
INCH. MAX LOAD CAPACITY :600,000 LBS, INSIDE 7 INCH, 35 PPF. TENSILE LOAD :
414,625 LBS.YIELD PRESSURE : 15,380 PSI. COLLAPSE PRESSURE : 14,430
PSI.LENGHT : 10 FT LONG. THREADS : 4 1/2 INCH, 15.2 PPF, TENARISBLUE PIN X
MYS CR-MO LOW ALLOY PIN. MATERIAL : => 125 KSISTEEL,FOR SERVICE IN H2S
ENVIROMENTAT TEMP _> 225 DEG F.THISWILL BE FOR ALL THE MATERIAL L/I 3.01
TO 3.09. MATERIAL NO :H2941001XX. BRONZE SETTING BALL. MATERIAL NO :
HWX17398XX. 1.02(QTY 1) BAKER MODEL 'ZXP' LINER TOP PACKER C/W HOLD
DOWN SLIPS,HR 20 FT PBR XYLAN-1052 COATED, FOR USE WITH 41/2 INCH
HRRUNNING TOOL, HONNED ID X 15FT LONG. SIZE : 4 1/2 INCH, 15.2PPFX 7 INCH,
35 PPF. EXTENSION SIZE : 5.750 INCH OD X 5.000 INCH.MAX PACKER OD : 5.789
INCH. MIN ID : 3.800 INCH. MIN DRIFT ID :3.750 INCH. INT YIELD PRESSURE :
16,380 PSI. COLLAPSE PRESSURE :15,840 PSI. TENSILE LOAD : PACKER ELEMENT
RATING : 13,000 PSI @400 DEG F, 352,825 LBS W/110MYS. QUALIFIED TO ISO
14310 V-0,ELEMENT SHALL FURTHER EXHIBIT NO (ZERO) SEAL DAMAGE WHEN
EXPOSEDTO HIGH CIRCULATION RATES UPTO 15 BPM WITH CONDITIONS
REFERENCEDIN API RP 10F-CAT IIIC. THREAD : 4 1/2 INCH, 15.2 PPF, TENARISBLUE
BOX DOWN. MATERIAL NO : H2962803XX. 1.03 (QTY 1). BAKERDRILLABLE PACK
OFF BUSHING. SIZE : 4 1/2 INCH, 15.2 PPF, TENARISBLUE PIN UP X#BOX DOWN.
MATERIAL NO : H28205XXXX. 1.04 (QTY 1).BAKER PLUG HOLDER BUSHING. SIZE :
4 1/2 INCH, 15.2 PPF, TENARISBLUE BOX UP X PIN DOWN. 1.05 (QTY 1). BAKER
TYPE II LANDINGCOLLAR BALL SEAT. SIZE : 4 1/2 INCH, 15.2 PPF, TENARIS
W/BAFFLEPLATE AND CERAMIC BLUE BOX UP X PIN DOWN. MATERIAL NO
:H2665512XX. 1.06 (QTY 1). BAKER DOUBLE VALVE FLOATCOLLAR
W/CASTALUMINUM VALVES, MUST MEET API RP 10F. SIZE : 4 1/2 INCH, 15.2PPF,
1000844953
Saudi Aramco: Company General Use
113
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
Material Description
Material Long Description
Material Number
9COM/9CAT
466
Drilling Equipment
(Casing Accessories &
Cementing
Equipment)
COLLAR; STAGE CEMENTER TYPE,SIZE 18-5/8 IN,TENARIS HYDRIL,STAGE TOOL,
COLLAR, TYPE P ES INFLATABLE PACKER, TYPE: ESIPC-P WITH METAL BLADDER
PACKER, CASING SIZE: 18-5/8 IN, CASING THREADER: TENARIS HYDRIL, CASING
THREAD: ER, CASING WEIGHT: 136 PPF, CASING GRADE: L-80, NOMINAL OD:
20.800 IN, MIN CASING ID: 17.219 IN, LENGTH: 75.76 IN, OPENING: 330 PSI, 2ND
OPENING: 1,450 PSI, CLOSING: 490 PSI, BURST: 5,435 PSI, COLLAPSE: 5,435 PSI,
TENSILE: 3,164,352 LBS.WITH COMPLETE SET OF FREE FALL PLUG SET
1000844376
467
SHOE FLOAT; GR X-52,24 IN OD,176 LB/FT,JVLW BOX CONNECTN,API 5B,22.2450
Drilling Equipment
(Casing Accessories & SHOE,FLOAT,24",JVLW,176#,X52, IN DRILL ID, WITH SS3 VALVE AND ISC PROFILE AND 5.5 IN X 5 IN DRILL PIPE
DISPLACEMENT DART "PDC DRILLABLE"
Cementing
ISC
Equipment)
1000736311
DV TOOL,18-5/8",TN
ER,136#,L80,MEC
468
Drilling Equipment
(Downhole
Equipment)
WHIPSTOCK,7",5.5,2329#,HYD,1.98DG
469
Drilling Equipment
(Downhole
Equipment)
PBR/SEAL,27/8",EUE,6.4#,9CR,10FT
470
2015
Drilling Equipment
(Downhole
Equipment)
HANGER,LINER,7X95/8,NVAM,26#,L80,HYD
WHIPSTOCK; SHALLOW ANGLE QUICK CUT (SAQC) TYPE,5-1/2 IN OD BODY
STD,ONE TRIP, RETRIEVABLE TRIP,7 IN CSNG DRE,23-29 LB/FT CSNG
DRE,SHALLOW ANGLE QUICK CUT, HYDRAULIC SET, RETRIEVABLE TYPE, WITH
PACKER, FOR 7 IN. 23-29 LB/FT. FACE LG, OVERALL LG OF 20.4 FT.
RECEPTACLE: POLISHED BORE; 2.330 IN MIN ID, 3.80 IN MAX OD, 10 FT STROKE,
F/2-7/8 IN 6.4 LB/FT TUBING, TO BE USED ON 4-1/2 IN AND 5 IN ‘TWR’ PACKER
WITH MATERIAL NUMBERS 10000025174 AND 1000589638. RECEPTACLE; PBR
TYPE,SIZE 2.33 IN ID X 3.80 IN OD X 17.5 FT LG,ALLOY STEEL,NACE MR-01-7597,AA 8 RD EUE PIN, H2S SERVICE KITS COMPONENTS
HANGER: LINER ASSEMBLY; HORIZONTAL; 7 IN. 26 LB/FT VAM X 9-5/8 IN. 36.0 TO
47.0 LB/FT; L-80 MATERIAL; TEXAS IRON HANGER LINER; HYDRAULIC
ACTIVATI,FOR HORIZONTAL & HIGH ANGLE COMPLETIONS,GR L-80,7 IN END
1,26.0 LB/FT END 1,9-5/8 IN END 2,36.0-47.0 LB/FT END 2,STUB ACME BOX UP X
NEW VAM PIN DOWN END CONN,TEXAS IRON WORKS TYPE "RP" & "IB-SC-R",
SINGLE CONE, COMPLETE ASSEMBLY MUST BE BOXED AS AN INDIVIDUAL UNIT
WITH COMPONENTS AS SPECIFIED IN KITS SECTION KITS COMPONENTS
Saudi Aramco: Company General Use
1000787908
1000589639
1000024133
114
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
Material Description
471
Drilling Equipment
(Advanced Well
Completion
Equipment)
PANEL,CONTROL,HYDELE,1WELL,4VALVE,AUTOM
472
Drilling Equipment
(Advanced Well
Completion
Equipment)
ICD-SCREEN,41/2,NVAM,11.6#,250MC
473
Drilling Equipment
(Casing Accessories &
Cementing
Equipment)
DV TOOL,18-5/8",BIG
OMEGAIS,136#,L80,MEC
474
2015
Drilling Equipment
(Advanced Well
Completion
Equipment)
Material Long Description
PANEL; CONTROL, HYDRAULIC TYPE,SS AISI 316,NEMA 4X, POWER
REQUIREMENT: 110 VAC, 4 KW, SCADA COMPATIBLE, REMOTELY OPERATED
ELECTRICALLY DRIVEN FOR IWC, CAPABLE OF OPERATING 4 VALVES, AND
MONITORING PDHMS IN 1 WELL, SCADA COMMUNICATION PROTOCOL: MODBUS485 OR ETHERNET, MAX PRESSURE: 10000 PSI, TEMPERATURE RATING: 55 DEG C
(UNDER SHELTER), HYDRAULIC TANK CAPACITY: 30 GAL., FLOW CONTROL VALVE:
SCHLUMBERGER TRFC-HN, PUMP FLOW RATE: 1 L/MIN (MAX), FULLY
COMPATIBLE WITH SAUDI ARAMCO I-FIELD REQUIREMENTS THE SURFACE UNIT
SHALL BE E WITH DRAIN VENT CONNECTIONS ARAMCO SAES-J-902. SURFACE
UNIT SHALL DISPLAY VIA ELECTRONIC VISUAL DISPL CRYSTAL DISPLAY (LDC) TO
DO
LOCALLY
SCREEN;
SIZE 4-1/2 IN,316L/304SS,MESH-SCREEN TYPE, MAX LENGTH: 41 FT, 11.6
PPF, RANGE 3, THREAD CONNECTION: NEW VAM BOX X PIN, RESTICTOR
MODULE: ADJUSTABLE, TOOL MAX OD: 5.625 IN, TOOL MIN ID: 3.939 IN, BASE
PIPE MATERIAL: L-80, SCREEN LENGTH: 20 FT, SCREEN: 250 MICRON NOMINAL,
ICD AND SCREEN MATERIAL: 316L/304SS.
CEMENTER; SET, ESIPC TYPE,18-5/8 IN OD,136 LB/FT WT,BIG OMEGA IS,GRADE: L80, TYPE P ES INFLATABLE PACKER COLLAR WITH METAL BLADDER PACKER AND
TWO-STAGE FREE-FALL PLUG SET, WITH 9.81 ID INSERT BAFFLE ADAPTER, WITH
COMPOSITE FREE-FALL OPENING PLUG.THIS DV SHOULD BE WITH 3,000 PSI
(MINIMUM) DIFFERENTIAL PRESSURE & WILL BE DEPLOYED @+/- 5,000-FT.
SCREEN; SIZE 4-1/2 IN,S13CR STAND ALONE, SAND CONTROL SCREENS FOR GAS
WELLS SHOULD MEET OR EXCEED FOLLOWING SPECIFICATION, BASE PIPE, SIZE
AND WEIGHT: 4 1/2 IN, 13.5 PPF, RANGE 3, MIN YIELD STRENGTH: 95,000 PSI,
MIN TENSILE STRENGTH: 105,000 PSI, SUPER 13 CHROME, NK3SB CASING
SCREEN,41/2,NK3SB,13.5#,250MIC,S13CR THREADS (BOX AND PIN CONNECTION), SCREEN /FILTER MEDIA/ WEAVE,
NOMINAL 250 MICRON WEAVE, ALLOY 20 OR INCONEL 825, TWO SCREEN
SUPPORTING LAYERS (INNER JACKET/ DARINAGE LAYER), ALLOY 20 OR INCONNEL
825, SHROUD: 304 STAINLESS STEEL. LENGTH: 38-40 FT
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000824566
1000818229
1000830134
1000840500
115
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
Material Description
Material Long Description
Material Number
9COM/9CAT
Drilling Equipment
(Advanced Well
Completion
Equipment)
SCREEN; FLOREG ICD WITH 350 MICRON DIRECT WRAP SCREEN TYPE,SIZE 4-1/2
IN,SS316L,GRADE: L-80 BASE PIPE, BASE PIPE SIZE: 4-1/2 IN, BASE PIPE MATERIAL:
SS316L, WITH SLOT AT 0.014" GAUGE OPENING, (SLOT TOLERANCE +0.002 IN, 0.003 IN). BASE PIPE WEIGHT: 12.6 PPF, BASE PIPE GRADE: L-80, CONNECTION:
NEW VAM PIN X BOX AT 38 FT (+0, -1 FT), SCREEN LENGTH AT 16 FT WITH IN
ICD-SCREEN,41/2,NVAM,12.6#,350MC,SNDST –FLOW CONTROL DEVICE, HOUSING RETAINING RING: 316L, HOUSING: 13CR80KSI, FLOW RING: 316L, THREADED RING: 316L, FLOW PORT MATERIAL:
TUNGSTEN CARBIDE, SET SCREW (5/16 UNF): 316L, O-RING: VITON, DIRECT WRAP
TENSILE: 227,000 LBS, DIRECT WRAP TORQUE: 18,000 FT-LBS, DIRECT WRAP
BURST: 4175 PSI, DIRECT WRAP COLLAPSE: 5,080 PSI.
1000840969
476
Drilling Equipment
(Advanced Well
Completion
Equipment)
CABLE; PERMANENT DOWNHOLE TYPE,16 AWG DIA,NICKEL PLATED
COPPER,DOWNHOLE CABLE COMES IN, MINIMUM BEND RADIUS: 1 IN, 1/4 IN, OD
SIZE FOR PDHMS HARDNESS: 250-345 MICRO (HV 500), WEIGHT: 160, SYSTEM
APPLICATION, PHYSICAL LBS/1000 FT, METHOD OF MANUFACTURE: COLD
FORMED, SPECIFICATIONS TUBE: OD: 0.25 IN, WELDED AND ROLL REDUCED,
ELECTRICAL WALL THICKNESS: 0.035 IN, MATERIAL: INC, PROPERTIES:
CONDUCTOR, 825, INSULATOR: RESISTANCE: 4.35 OHMS/1000, SIZE: 2.57 MM
NOMINAL, MATERIAL: TEFZEL (ETFE), OHMS/1000 FT @ 150 DEG C, IP-1300,
FILLER: TUBE RESISTANCE: 15, OHMS/1000 FT @ 20 DEG C, SIZE: 3.86 MM
CABLE,DOWNHOLE,16AWG,1/4", NOMINAL, 16.8 OHMS/1000 FT @ 150, MATERIAL: DEG C, CAPACITANCE: 27.9, IP1030, ENCAPSULATION: DIMENSION: 11 MM X 11 MM, PICO FARDS/FT @ 20 DEG
INC825,1FT
C, 31.7 PICO FARADS/FT, MATERIAL: NYLON @ 150 DEG C, INSULATION RATING:
6, YIELD RESISTANCE: 15,000 M, STRENGTH: 106,000 PSI, OHMS/1000 FT,
VOLTAGE ULT, TENSILE STRENGTH: 123,000 PSI, COLLAPSE RATING: 1,000 VDC.
MAX, CURRENT: 2.4 A, VELOCITY PRESSURE: >20,000 PSI, BURST PRESSURE:
>29,000 OF PROPAGATION: 69.1, ENCAPSULATION PSI, CRUSH RESISTANCE:
22,300 LBS, SURFACE PROPERTIES: TEMPERATURE, FINISH: 12.9 MICRON,
RATING: 150 DEG C, HARDNESS: 50 (SHORE D), WATER ABSORPTION, (GRAM/1SQ
MM, 0.5 MM THK: 0.45 GRAM (ASTM 96-A,1.61 GRAM (ASTM 96-BW, TENSILE
STRENGTH: 4,003 PSI, ELONGATION: 600%.
1000840502
477
Drilling Equipment
(Casing Accessories &
Cementing
Equipment)
CENTRALIZER CASING; BLADE RUNNER TYPE,4-1/2 IN X 6-1/8 IN (OD 5-3/4 IN)
CASING,TYPE: SOLID BODY, SLIP ON. BLADES: 5 X SPIRAL RIGHT HAND. MATERIAL:
CENTRALIZER,41/2",BLADERUNNER,5.750"OD ZINC-ALLOY/TEFLON. WEIGHT (KG): 4.6. FLOW-BY (SQ INS): 8.12.
MANUFACTURING PROCESS: DIE CAST.
1000886160
475
2015
Saudi Aramco: Company General Use
116
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
478
479
480
481
2015
Category
Material Description
Material Long Description
CENTRALIZER CASING; SLIP-ON, SOLID BODY, SPIR-O-LIZER TYPE,7 IN X 8-1/2 IN
CASING,8-1/4 IN BOW OD,STYLE 5-BLADE, SPIRAL,INTERNAL DIA.: 7-1/8 INCH,
WALL THICKNESS: 3/16 INCH, LENGTH: 10 INCH, WEIGHT: 6.10 KG, BLADES: 5 X
SPIRAL, BLADE ANGLE: 25O, BLADE LEAD IN: 2-1/2 INCH, BLADE LEAD OUT: 1-1/2
INCH, MATERIAL: ZINC ALLOY, USE WITH 2 EACH DUCTILE IRON SPIR-O-LOK STOP
Drilling Equipment
COLLARS, WITH MATERIAL NUMBER 1000XXXXX, ITEMS MUST BE BOXED AS AN
(Casing Accessories & CENTRALIZER,7",SPIROLIZER,8.25
INDIVIDUAL UNIT FOR SHIPMENT AND STORAGE PER SAUDI ARAMCO PACKAGING
Cementing
0"OD
SPEC 844418. MANUFACTURER MUST BAR CODE IDENTIFY EACH ISSUE UNIT ON
Equipment)
BOTH THE MATERIAL AND OUTSIDE THE CONTAINER IN WHICH THE ISSUE UNIT IS
CONTAINED. CODE TO BE IN THE INTERNATIONAL CODE 39 BAR CODING SYSTEM
FORMAT AND ADHERE TO ANSI MH10.8 ( LATEST EDITION) SPECIFICATION (LESS
SECTIONS 12 & 13). BAR CODE TAG MUST INCLUDE THE SAUDI ARAMCO STOCK
NUMBER AND PURCHASE ORDER NUMBER.
Drilling Equipment
GAUGE; PDHMS-PERMANENT DOWNHOLE MEASUREMENT TYPE,175/150
PDHMS,3-1/2,EUE,DUAL
(Advanced Well
RANGE,SIZE 3-1/2 IN,INCONEL 718,DAUL AND SINGLE SURE SENS 150 -PDHMSGAUGE,DUAL PORT
Completion
PERMANENT DOWNHOLE MEASUREMENT SYSTEM .DUAL TUBING/ANNULUS
Equipment)
GAUGE ASSEMBLY : EUE KIT COMPONENTS
WHIPSTOCK; SHALLOW ANGLE QUICK CUT (SAQC) TYPE,5-1/2 IN DIAMETER BODY
Drilling Equipment
STD,HYDRAULIC SET TRIP,7 IN CSNG DRE,23-35 LB/FT CSNG DRE,WEATHERFORD
WHIPSTOCK,7",5.5,23(Downhole
WHIPSTOCK, QUICK CUT, SHALLOW ANGLE HYDRAULIC RETRIEVABLE TYPE, 5-1/2
35#,HYD,1.98DG
Equipment)
IN OD BODY, MULTI-CATCH ANCHOR, 1.98 DEGREE WHIP FACE FOR 7 IN 23-35
LB/FT CASING
RECEPTACLE: RETRIEVABLE, 5.820 IN X 3.762 IN X 15.1 LB, 4130/4140, 18-22 HRC
EXCEPT LOCATOR, SPACER TOP SEAL RECEPTACLE; RETRIEVABLE TYPE,SIZE 5.820
IN X 3.762 IN X 15.1 LB,4130/4140, 18-22 HRC EXCEPT LOCATOR, SPACER, TOP
Drilling Equipment
SEAL MANDREL, AND PBR B-SUB AD WHICH MUST BE AS FOLLOWS AISI 41XX
PBR/SEAL,4(Downhole
1/2",VTHC,15.1#,41XX-95,24FT W/MODIFIED CHEM F PER API GRADE T-95, 95 KS MIN YIELD, Q & T, 25 HRC MAX
Equipment)
FOR H2S SERVICE PER NACE MR-01-75 (LATEST REV) SSC TEST TM-01777 IS NOT
REQUIRED.,NACE MR-01-75,EACH ASSEMBLY MUST BE BOXED AS AN INDIVIDUAL
UNIT WITH COMPONENTS AS LISTED IN SAMS CATALOG. KITS COMPONENTS
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000803582
1000908043
1000769303
1000025605
117
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
Material Description
7 IN. X 4 IN. RETRIEVABLE PACKER BORE RECEPTACLE W/INTEGRAL 'KTR' SEAL
ASSY; 4-1/2 IN,13.5 LB/FT VAM TOP HC BOX RECEPTACLE; RETRIEVABLE PACKER
BORE TYPE,SIZE 3.720 IN ID X 5.875 IN OD X 13.5 LB/FT,41XX-95 KSI (25 HRC
PBR/SEAL,4MAX), (BMS A-152) HT PLUS Q&T,NACE MR-01-75 (LAST REV.),FOR H2S SVC,FOR
1/2",VTHC,13.5#,41XX-95,25FT USE W/7 IN. FAB-1 PACKER EACH ASSEMBLY MUST BE BOXED AS AN INDIVIDUAL
UNIT WITH COMPONENTS AS LISTED IN TH SAMS CATALOG, CONSISTING OF
COMPONENTS AS DETAILED IN KITS SECTION. KITS COMPONENTS
482
Drilling Equipment
(Downhole
Equipment)
483
Drilling Equipment
(Downhole
Equipment)
HANGER,LINER,4-1/2X95/8,VTHC,13.5#,P110
484
Drilling Equipment
(Downhole
Equipment)
PACKER,SWELL,41/2X6.125"OH,SLIPON
485
Drilling Equipment
(Downhole
Equipment)
486
Drilling Equipment
(Downhole
Equipment)
487
Drilling Equipment
(Casing Accessories &
Cementing
Equipment)
2015
Material Long Description
HANGER LINER; GR P-110,7 IN END 1,32 PPF END 1,9-5/8 IN END 2,53.5 PPF END
2,VAM-SIIJ-II END CONN,VAM-SIIJ-II,X-PAK LINER HANGER EQUIPMENT FOR 7 IN,
32 PPF BY 9-5/8 IN, 53.5 - 58.4 PPF LINER KIT COMPONENTS
PACKER PRODUCTION; SLIDE ON PIPE OH SWELL PACKER TYPE,5.625 IN OD,3.958
IN ID,4-1/2 IN OD,NA (SLIDE ON PIPE) CONNECTN KIT COMPONENTS
PACKER, LINER: PACKER, LINER TOP, GEN-2 TYPE SN-AT-12 HI-LOAD FOR
DEVIATED & VERTICAL KHUFF GAS WELLS PACKER LINER; PACKER, LINER TOP,
GEN-2 TYPE SN-AT-12 HI-LOAD FOR DEVIATED & VERTICAL KHUFF GAS WELLS
PACKER,TIEBACK,7",NK3SB,32#,P WITH LG-12 TBR KIT COMPONENTS: ITM(1) P/N 621333 PACKER: LINER TOP, TYPE
SN-AT-12 HI-LOAD SLIPS FOR TYPE LG-12 TBR, 7 IN 32# X 9-5/8 IN 53.5 W/NK-3SB
110,TBR12FT
BOX UP, W/6 FT PORTED NIPPLE & FULL MULESHOE BOTTOM, 3 SETS ATR SEALS
FOR 7.375 IN I.D. TBR, W/AFLAS PI-PO PKR (10M PSI DP) AND HOLD DOWN SLIPS,
41XX - 110,000 PSI MIN. YIELD (P-110), 6.094 IN MIN I.D., 6.0 IN DRIFT ID. KITS
COMPONENTS
WELL SCREEN: . . SCREEN; CASING WELL TYPE,304 SS,WIRE WRAPPED, RIBBED,
SCREEN,WIRE,7",LTC,26#,0.012",I DRILLED HOLE, 0.012 IN OPENINGS, 24 IN BLANK ON EACH END, TO BE WRAPPED
ON 7 IN OD 26 LB/FT GR J/K-55 8RD LT & C RANGE 2 CASING WITH THD
NJECTION
PROTECTORS INSTALLED ON ON BOTH ENDS BEFORE SHIPMENT
CENTRALIZER,133/8",BOWSPR,HINGED,19.88"
CENTRALIZER: CASING; FOR 13-3/8 IN. OD CASING; TO FIT INSIDE 18-5/8 IN.
CASING. CENTRALIZER CASING; STRAIGHT SPRING TYPE,18-5/8 IN CASING,13-3/8
IN OD,19.8800 IN BOW OD,STYLE NON-WELDED HINGE,48.0-102.0 LB/FT,TYPE "STIV", WITHOUT HINGE PINS
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000025604
1000888136
1000844947
1000025009
1000032752
1000022660
118
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
488
Drilling Equipment
(Casing Accessories &
Cementing
Equipment)
Material Description
SHOE, FLOAT: FOR 18-5/8 IN OD CASING 87.5-115 LB/FT API 5B BUTTRESS
SHOE,FLOAT,18-5/8",BTC,87.5- THREAD, K-55 SHOE FLOAT; FOR 18-5/8 IN OD CASING, 87.5-115 LB/FT API 5B
BUTTRESS THREAD, K-55 "PDC DRILLABLE"
115#,K55
489
Drilling Equipment
(Downhole
Equipment)
HANGER,LINER,41/2X7,VTHC,13.5#,C95,HYD
490
Drilling Equipment
(Downhole
Equipment)
VALVE,SAFETY,95/8,VAM21,10K,TRSSSV+CL
491
Drilling Equipment
(Downhole
Equipment)
492
493
494
495
2015
Drilling Equipment
(Advanced Well
Completion
Equipment)
Drilling Equipment
(Downhole
Equipment)
Drilling Equipment
(Downhole
Equipment)
Drilling Equipment
(Advanced Well
Completion
Equipment)
Material Long Description
HANGER: LINER ASSEMBLY; 4.5 IN. 13.5# VAM TOP HC X 7 IN 29-35# 'TSP' HYDROHANGER RRP-TSP 3.920" MIN ID, GEN-2, FOR KHUFF HANGER LINER; HYDRAULIC
ACTIVATI,FOR H2S SOUR SERVICE,GR 41XX- 95000 MYS (C-95),4- 1/2 IN END
1,13.5 LB/FT END 1,7 IN END 2,29-35 LB/FT END 2,VAM TOP HC PIN X PIN END
CONN,NACE MR-01-75,TIW TYPE "TSP", FOR 4.5 GENERATION-2 KHUFF LINER
HANGER SYSTEM COMPLETE ASSEMBLY MUST BE BOXED AS AN INDIVIDUAL UNIT
WITH ITS COMPONENTS AS LISTED BELOW KITS COMPONENTS
EQUALIZER; 9-5/8 IN, 10,000 PSI PRESSURE RATING, TUBING-RETRIEVABLE
SAFETY VALVE ASSY COMPLETE WITH ACCESSORIES
SEAL ASSY; SIZE 4-1/2 IN, TO LOCATE AT TOP OF 4-1/2 IN SETTING SLEEVE AND
SEAL 4-1/2 IN PBR. SEAL; PBR SEALS TYPE,SIZE 4-1/2 IN,(BMS A-152) 41XX-HC95
PBR/SEAL,41/2",NK3SB,13.5#,41XX-95,10FT MYS MATERIAL FOR HT SOUR SERVICE (T-95EQUIVALENT-NACE TEST TM0177
WAIVED),TO LOCATE AT TOP OF 4-1/2 IN SETTING SLEEVE. KITS COMPONENTS
SCREEN,MESH,41/2,NVAM,11.6#,250MIC
HANGER,LINER,95/8X14,FJL,53.5#,718,HYD
SCREEN; STAND ALONE PREMIUM SCREEN TYPE,SIZE 41/2IN,316SS,SCHLUMBERGER PREMIUM SCREEN SYSTEM,L-80, R3, THREAD
250MICRON MESH
HANGER LINER; 9-5/8 IN END 1,9-5/8 IN END 2,53.3 LB END 2,9-5/8 IN, 53.3 PPF X
14 IN, 114 PPF BAKER CSG LINER HANGER AND ACCESSORIES. KIT COMPONENTS
HANGER LINER; HYDRAULIC ACTIVATI,9-5/8 INCH END 1,53.5 LB/FT END 1,13-3/8
INCH END 2,86.0-92.0 LB/FT END 2,#9-5/8 IN X 13-3/8 IN LINER HANGER SYSTEM
KIT COMPONENTS
SCREEN; WELDED TYPE,SIZE 4-1/2 IN,STATINLESS STEEL,BASE PIPE SIZE: 4-1/2 IN,
SCREEN,4WEITH: 12.6 PPF, L-80, WIRE WRAPPED 0.020 GA, ALONG WITH CENTRALIZER
1/2,NVAM,12.6#,0.020",INJECTIO
CONNECTION: NEW VAM -BOX X PIN, LENGTH: R-3 (38 TO 42 FT)
N
HANGER,LINER,9-5/8X133/8,NK3SB,53.5#,HY
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000025919
1000024316
1000831437
1000644370
1000903439
1000830502
1000903460
1000827338
119
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
Material Description
496
Drilling Equipment
(Advanced Well
Completion
Equipment)
KIT,ICD+DUAL P/T GAUGES,31/2",4140/L80
497
Drilling Equipment
(Casing Accessories &
Cementing
Equipment)
CENTRALIZER,185/8",BOWSPR,HINGED,23.70"
498
499
2015
Drilling Equipment
(Downhole
Equipment)
Drilling Equipment
(Casing Accessories &
Cementing
Equipment)
Material Long Description
ASSEMBLY; 3 1/2 IN. COMPACT INTERGRATED COMPLETION SYSTEM
TYPE,CONSISTING OF 3 1/2 IN. INFLOW CONTROL VALVES WITH ABSOLUTE
POSITION SENOR AND DUAL TUBING/ANNULUS P/T GAUGES. MATERIAL: 4140/L80
CENTRALIZER: CASING; FOR 18-5/8 IN. OD CASING; TO FIT INSIDE 24- - IN. HOLE. .
CENTRALIZER CASING; STRAIGHT SPRING TYPE,24 IN CASING,18-5/8 IN
OD,23.7000 IN BOW OD,STYLE NON-WELDED HINGE,78.0-122.0 LB/FT,TYPE "STIII", WITHOUT HINGE PINS
Material Number
9COM/9CAT
1000888959
1000022661
HANGER,LINER,41/2X7,VTHC,13.5#,95,HYD
HANGER LINER; HYDRAULIC ACTIVATI,4.500 IN END 1,13.50 PPF END 1,7.00 IN
END 2,20.0 - 35.0 PPF END 2,4.500 IN 13.50 PPF VAM TOP HC PIN UP 4.500 IN
13.50 PPF VAM TOP HC PIN DOWN 07.000 IN 20.0-35.0 PPF,4-1/2 IN X 7 IN
CONTROL SET LINER HANGER FOR UDILIYAH GAS. SIZE: 4.5 IN (13.5 PPF) X 7.00 IN
(20-35 PPF) VTHC PXP. MAX OD: 5.819 IN. MIN ID: 3.830 IN. LENGTH: 10 FT.
ROTATING: YES. MATERIAL: 95 KSI MYS. LINER SIZE IN INCHES: 4.500 IN X 7.00 IN.
LINER THREAD: VTHC. LINER WEIGHT, (WEIGHT RANGE IF APPLICABLE), IN PPF:
13.5 PPF. PARENT CASING SIZE IN INCHES: 7.00 IN. PARENT CASING WEIGHT,
(WEIGHT RANGE IF APPLICABLE), IN PPF: 20-35 PPF. STEEL GRADE:95 KSI MYS.
SETTING METHOD (MECHANICAL/HYDRAULIC): HYDRAULIC. ROTATABLE WHILE
CEMENTING, YES/NO: NO. APPLICATION, GAS/OIL/WATER: GAS. KIT
COMPONENTS
1000917506
CENTRALIZER,95/8",SPIROLIZER,11.875"OD
CENTRALIZER CASING; SLIP-ON, SOLID BODY, SPIR-O-LIZER TYPE,9-5/8 IN X 12-1/4
IN CASING,11-7/8 IN BOW OD,STYLE 5-BLADE, SPIRAL,INTERNAL DIA.: 9.77 INCH,
WALL THICKNESS: 0.30 INCH, LENGTH: 10 INCH, WEIGHT: 13.9 KG, BLADES: 5 X
SPIRAL, BLADE ANGLE: 25O, BLADE LEAD IN: 3-1/2 INCH, BLADE LEAD OUT: 2-1/2
INCH, MATERIAL: ZINC ALLOY, USE WITH 2 EACH DUCTILE IRON SPIR-O-LOK STOP
COLLARS, WITH MATERIAL NUMBER 1000XXXXX, ITEMS MUST BE BOXED AS AN
INDIVIDUAL UNIT FOR SHIPMENT AND STORAGE PER SAUDI ARAMCO PACKAGING
SPEC 844418. MANUFACTURER MUST BAR CODE IDENTIFY EACH ISSUE UNIT ON
BOTH THE MATERIAL AND OUTSIDE THE CONTAINER IN WHICH THE ISSUE UNIT IS
CONTAINED. CODE TO BE IN THE INTERNATIONAL CODE 39 BAR CODING SYSTEM
FORMAT AND ADHERE TO ANSI MH10.8 ( LATEST EDITION) SPECIFICATION (LESS
SECTIONS 12 & 13). BAR CODE TAG MUST INCLUDE THE SAUDI ARAMCO STOCK
NUMBER AND PURCHASE ORDER NUMBER.
1000803584
Saudi Aramco: Company General Use
120
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
500
Drilling Equipment
(Casing Accessories &
Cementing
Equipment)
501
Drilling Equipment
(Downhole
Equipment)
SEAL,PRODUCTION,95/8",VAM21,53.5#,718
502
Drilling Equipment
(Downhole
Equipment)
KIT,LINER,41/2X7",NVAM,11.6#,L80,NCE
503
Drilling Equipment
(Downhole
Equipment)
PACKER,SWELL,41/2X8.00",VTHC,13.#,P110
504
Drilling Equipment
(Downhole
Equipment)
NIPPLE,LANDING,41/2",VAM,X,SL,3.813"ID
2015
Material Description
Material Long Description
CENTRALIZER: CASING; FOR 9-5/8 IN. OD CASING; TO FIT INSIDE 13-3/8 IN.
CASING. CENTRALIZER CASING; STRAIGHT SPRING TYPE,13-3/8 IN CASING,9-5/8 IN
CENTRALIZER,95/8",BOWSPR,HINGED,14.583" OD,14.5830 IN BOW OD,STYLE NON-WELDED HINGE,40.0-71.8 LB/FT,TYPE "ST-III",
WITHOUT HINGE PINS
SEAL; SNAP IN-SNAP OUT TYPE,SIZE 9-5/8 IN,INCONNEL 718, 120 KSI MYS,9 5/8
INCH SNAP IN-SNAP OUT SHEAR. RELEASE ANCHOR PRODUCTION SEAL
ASSEMBLY. SIZE: 9 5/8 INCH, 53.5 PPF, THREADS: VAM 21 BOX UP X 1/2 MULE
SHOE. MATERIAL: INCONNEL 718, 120 KSI MYS. TOOL OD: 12.130 INCH, TOOL ID:
9.398 INCH
LINER; NON CEMENTED KIT TYPE,4-1/2 IN OFF BOTTOM NON- CEMENTING KIT.
FOR 7 IN 26# CASING AND 6-1/8 IN OPEN HOLE CONSIST OF: ITEM QUANTITY
DESCRIPTION 01 01 Baker SLZXP Liner Hanger/Packer Size: 5 IN. 18b/ft X 7 IN. 2329Lb/ft Thread: 5 IN. 18lb/ft New Vam Box Down Extension I.D.: 5-1/4 IN. Tool
O.D.: 6.060 IN. Tool I.D.: 4.276 IN. Extension Length: 10 feet PART# H296350005
02 01 Baker #PBR# Style Locator Seal Assembly Size: 5.250 IN. X 4-1/2 IN. 11.6
lb/ft Thread Connection: New Vam Box Up X ½ Mulshoe Length: 10 ft effective
Seal Stroke Material: L-80 Seal: Bullet Style Premium Seal Material: L-80 PART#
H297550798 03 01 Baker Bull plug Size: 4-1/2 IN. 11.6lb/ft Thread Connection:
New Vam Box Tool O.D.: 5.000 IN. Material: L-80 PART# H485-30-4512
PACKER; SWELLPACKER SP OS H2S TYPE,#SWELLPACKER, OIL SWELLING, 6A,
H2S,#4.5IN, 13.5LBS, API GRADE P-110#LOW ALLOY STEEL, VAMTOP-HC, BOX
X#PIN, 12M BASEPIPE X 8IN ELEMENT OD#X 9M ELEMENT LENGTH
NIPPLE: LANDING; 5.03 IN. OD X 3.813 IN. ID X 18.05 IN. LG; 4-1/2 IN. 12.6 LB/FT
VAM BOX UP X NIPPLE LANDING; X (SELECTIVE) TYPE,9% CHROMIUM - 1%
MOLYBDENUM,L-80,FOR H2S & CO2,API-Q1/ISO 9001 AND API 14L/ISO 16070
COONECTN,POLISHED BORE,3.813 IN ID,5.030 IN OD,18.05 IN LG,4-1/2 IN TUBING
OD,12.60 LB/FT,VAM BOX UP X PIN DOWN,API 5B, API-Q1/ISO 9001, API 14L/ISO
16070, NACE MR-01-75,HES NO 711X38107 MADE TO: NACE MR-01-75 (LATEST
EDITION)
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000022639
1000830501
1000751070
1000917808
1000024620
121
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
505
506
507
508
509
2015
Category
Drilling Equipment
(Downhole
Equipment)
Material Description
HANGER,LINER,7X95/8,NVAM,26#,L80,HYD
Material Long Description
HANGER, LINER: HYDRAULIC ACTIVATION, HORIZONTAL & HIGH ANGLE
COMPLETIONS SERVICE, L-80, 7 IN END 1, 26 LB/FT END HANGER LINER;
HYDRAULIC ACTIVATI,FOR HORIZONTAL & HIGH ANGLE COMPLETIONS,GR L-80,7
IN END 1,26 LB/FT END 1,9-5/8 IN END 2,40-47 LB/FT END 2,7 IN 26 L/FT NEW
VAM PIN X PIN END CONN,API 5B,BASE MATERIAL: L-80, TOTAL WEIGHT: 550
KGS, VOLUME: 25 CU. FT. COMPLETE UNIT MUST BE BOXED AS AN INDIVIDUAL
UNIT WITH ITS COMPONENTS AS LISTED BELOW. KITS COMPONENTS
PACKER PRODUCTION; XMP MULTI PORT, FEED-THROUGH TYPE,6.00 IN OD,2.88
IN ID,7 IN OD,26-29 PPF,3-1/2 IN CONNECTN,10.2 PPF,VAM TOP
COONECTN,MATERIAL INC 718 , ELEMENT AFLAS(90-80-90), WP:7500PSI AND
WT:350 DEGF, 4 X 1/4 IN FEEDTHROUGH
TOOL; SIZE 24 IN,STYLE MECHANICAL STAGE,X-42, RL-4S, 176 PPF, 22.19 IN MIN
Drilling Equipment
DRILLOUT ID, BOTTOM PLUG WITH RUPTURE DISK, SHUT OFF PLUG WITH
(Casing Accessories &
DV TOOL,24",RL4S,176#,X42,MEC LANDING COLLAR, FREE FALL OPEN CONE AND CLOSING PLUG, NOT PDC
Cementing
DRILLABLE
Equipment)
Drilling Equipment
(Downhole
Equipment)
Drilling Equipment
(Downhole
Equipment)
Drilling Equipment
(Downhole
Equipment)
PACKER,PROD,7X31/2,VTOP,10.2#,718,FTHRU
Material Number
9COM/9CAT
1000645123
1000888236
1000830132
VALVE,SAFETY,27/8",SSSV,9CR1MO,10K,FXE
VALVE: 'FXE' FLAPPER SUBSURFACE SAFETY, 2 813 IN X 1 500 IN, 10,000 PSI
WORKING PRESSURE, 9CR-1MO BODY, API VALVE; 'FXE' FLAPPER SUBSURFACE
SAFETY TYPE,SIZE 2.813 IN X 1.500 IN,10,000 PSI WORKING PRESSURE
SUPPLY,9CR-1MO BODY,API 14A,CLASSES 1 3,NACE MR-01-75 (2002 EDITI NACE
MR-01-75,API-14A NACE MR-01-75/,ISO 1515 API MONOGRAMMED,EQUALIZING,
TOP THREAD: 2-1/4"-12 SLB, SERVICE:H2S, MAX OD: 2.813 IN., MIN OD:1.500 IN,
LENGTH:44.80 IN, TEMPERATURE: 20 TO 300 DEG F, RUNNING TOOL PN:41 XO
28100 (13623), RUNNING PRONG PN: 49 P 1789 (101010079), PULLING PRONG
PN: 49 P 1789 (101010079), (ADAPTER REQUIRED) PULLING PRONG ADAPTER PN
49 P 1791 (101010081)
1000645125
PACKER,PROD,9-5/8X41/2,NVAM,12.6#,RET
PACKER PRODUCTION; 'QHSB' HYDRAULIC SET RETRIEVABLE TYPE,FOR H2S,
CO2,HYDRAULIC SET ACTIVATI,8.445 IN OD,4.747 IN ID,9-5/8 IN OD,40-47
LB/FT,5.250-4TPI LEFT HAND SQUARE THREAD(TOP) X 4-1/2 IN 12.6 PPF L-80 NEW
VAM PIN DOWN CONNECTN,12.6 LB/FT (BOTTOM),LEFT-HAND SQUARE
THREAD(TOP) NEW VAM PIN (DOWN) COONECTN,6,000 PSI SUPPLY,NACE MR 0175,CARBON STEEL 4130/4140 FLOW WETTED NITRILE ELASTOMER, NITRILE ORINGS. KIT COMPONENTS
1000810364
Saudi Aramco: Company General Use
122
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
510
Drilling Equipment
(Downhole
Equipment)
511
Drilling Equipment
(Downhole
Equipment)
Material Description
Material Number
9COM/9CAT
HANGER,LINER,41/2X7,NVAM,11.6#,L80,MEC
HANGER LINER; MECHANICAL ACTIVATI,FOR STANDARD,GR L-80,4-1/2 IN END
1,11.6 LB/FT END 1,7 IN END 2,26 LB/FT END 2,NEW VAM BOX UP X MULE SHOE
END CONN,NON-CEMENTED SYSTEM, SCHLUMBERGER LINER HANGER SCREEN,
HANGER SYSTEM FOR 7 IN CASING CONSISTS OF THE FOLLOWING: 1. TIE BACK
STEM SYSTEM WITH BULLET SEAL, FOR 10 FT EXTENSION 2. POLISHED BORE
RECEPTACLE (PBR) 3. R-SETTING SLEEVE WITH XTS LINER TOP PACKER, PACK-OFF
NIPPLE AND MECHANICAL LOCK 4. HYDRAULIC ROTATING DOUBLE CONE LINER
HANGER WITH PTFE/CARBON SEALING ELEMENT IN CYLINDER AND HANGER 5.
SEATING BALL KIT COMPONENTS
1000827948
PACKER,SWELL,41/2X6.125"OH,NVAM,12.6#
PACKER PRODUCTION; OH SWELL PACKER TYPE,5.625 IN OD,3.958 IN ID,6-1/8 IN
HOLE OD,4-1/2 IN CONNECTN,12.6 PPF,NEW VAM BOX X PIN COONECTN,4-1/2 IN
SWELL REPACKER, BASE PIPE MATERIAL: L-80 STEEL, SEAL MATERIAL: OIL SWELL
ELEMENT, SEAL LENGTH: 20 FT, JOINT LENGTH: 30 FT.
1000844948
512
Drilling Equipment
(Downhole
Equipment)
HANGER,LINER,7X95/8,NVAM,26#,CRA,HYD
513
Drilling Equipment
(Downhole
Equipment)
VALVE,SAFETY,41/2",CRA,WRSV,XVE
2015
Material Long Description
HANGER LINER; HYDRAULIC ACTIVATI,7 IN END 1,26 LB/FT END 1,9-5/8 IN END
2,40-47 LB END 2,NEW VAM END CONN,CONTROL SET LINER HANGER WITH ZXP
LINER TOP PACKER AND FLEX LOCK LINER HANGER ASSEMBLY CONSISTING OF:
ZXP LINER TOP PACKER 7 IN, 26 LB/FT X 9-5/8 IN 40-47 LB, WITH HOLD DOWN
SLIPS SIZE: 7 IN X 9-5/8 IN 40-47 LB, EXTENSION SIZE: 15 FT, MAX TOOL OD: 8.453
IN, MIN TOOL OD: 6.278 IN, MIN. BURST: 8,251 PSI, MIN. COLLAPSE: 5,376 PSI,
TENSILE LOAD: 602,351 LBS, ELEMENT RATING: 10,000 PSI AT 400 DEG F,
ELEMENT RATING: 17 BPM CIRCULATION RATE, MATERIAL: 22 RC, 80 KSY MYS.
KIT COMPONENTS
SAFETY VALVE COMPONENTS: SUBSURFACE, FLAPPER; WIRELINE RETRIEVABLE
PORTION; 4.500 IN X 3.810 IN. VALVE; SUBSURFACE SAFETY TYPE,SIZE 4.50 IN X
3.810 IN, PROFILE 2.122 IN,6000 PSI WORKING PRESSURE 1500 PSI OPENING
PRESSURE SUPPLY,9CR. IMO. ON FLOW WETTED PARTS ID TREATED WITH 63RMS
AND BAKERTON V BODY,API 14A,NACE MR-01-75 API-14A,NACE MR-01-75/ ISO
15156 MONOGRAMMED,H2S AND CO2 SERVICE, BAKER MODEL 'XVE' WITH
FLAPPER
Saudi Aramco: Company General Use
1000827579
1000026444
123
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
514
Drilling Equipment
(Downhole
Equipment)
515
Drilling Equipment
(Downhole
Equipment)
516
Drilling Equipment
(Downhole
Equipment)
2015
Material Description
Material Long Description
Material Number
9COM/9CAT
VALVE,ICV,27/8",EUE,6.5#,41XX,FCV004
VALVE; TUBING RETRIEVABLE FLOW CONTROL-HYDRAULIC TYPE,SIZE 2-7/8 IN,27/8 IN 6.5 PPF EUE BOX X PIN END CONN,INC718 BODY,INC718, 9CR-1MO,
4140/4130 TRIM,EXTERNAL WORKING PRESSUR: 7500 PSI, INTERNAL DIA.: 2.250
IN MIN, DRIFT ID: 2.245 IN, LENGTH: 194 IN, MAX FLOW RATE: 25000 BBL/DAY,
MAX WORKING TEMP.: 325°F, MIN WORKING TEMP.: 40°F, MINOR OD: 4.530 IN,
OD: 4.530 IN, OD: 5.125 IN MAX, SEAL BORE SIZE: 2.250 IN. THE TUBING
RETRIEVABLE FLOW CONTROLLER SYSTEM PROVIDES REMOTELY ACTUATED
DOWNHOLE CONTROL OF FLOW FROM THE RESERVOIR IN INTELLIGENT
COMPLETIONS. THE SYSTEM MUST BE OPERATED BY A 0.25-IN HYDRAULIC
CONTROL LINE THAT IS ROUTED FROM THE SURFACE CONTROLS TO THE CHOKE
SECTION OF THE TOOL.
1000782149
WHIPSTOCK; SHALLOW ANGLE QUICK CUT TYPE,5-1/2 IN DIA BODY
STD,MECHANICAL TRIP,7 IN CSNG DRE,23-35 LB/FT CSNG DRE,WEATHERFORD
WHIPSTOCK,7",5.5,23WHIPSTOCK, QUICK CUT, SHALLOW ANGLE MECHANICAL RETRIEVABLE TYPE, 535#,MEC,1.98DG
1/2 IN OD BODY, MULTI-CATCH ANCHOR, 1.98 DEGREE WHIP FACE FOR 7 IN 2335 PPF CASING
NIPPLE LANDING; NIPPLE: RATCH LATCH C/W SEAL ASSEMBLY KIT COMPONENTS,
ITEM 1, QTY. 1EA, SHEAR -TO-LATCH RATCH LATCH SEAL ASSY, 10000 PSI, 9-5/8
IN, 53.5 PPF, VAM 21 BOX X MULE SHOE GUIDE, KTR SEAL STACK, 12.13 IN OD X
SEAL,98.535 IN ID, MATERIAL: NICKEL ALLOY 725 / 625+ FOR ELEMENTAL SULPHUR,
5/8",VAM21,53.5#,725/625,R- H2S/CO2 SERVICE. ITEM 2, QTY. 1EA, RATCH LATCH SEAL NIPPLE, 10.375-6 R/L
LATCH
BOX 9-5/8 IN, 53.5 PPF, VAM 21 PIN, 10000 PSI WORKING PRESSURE, 12.13 IN OD
X 8.535 IN ID, MATERIAL: NICKEL ALLOY 725/625+ FOR ELEMENTAL SULPHUR,
H2S/CO2 SERVICE.
Saudi Aramco: Company General Use
1000769301
1000831428
124
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
517
518
519
520
2015
Category
Drilling Equipment
(Downhole
Equipment)
Material Description
Material Long Description
KIT,LINER,5-1/2X95/8",NVAM,17#,NONCEMEN
LINER; NON CEMENTED KIT TYPE,5-1/2 IN OFF BOTTOM NON- CEMENTING KIT.
FOR 9-5/8 IN 43.5 # CASING AND 8-1/2 IN OPEN HOLE, PDC DRILLABLE CONSIST
OF: ITEM QUANTITY DESCRIPTION 01 01 PBR Seal Assembly with Bullet Seals Size:
7.500 IN. X 5-1/2 IN. 15.5 lb/ft For 15 ft extension Thread connection: New Vam
Box Up X ½ Mulshoe Seal O.D.: 7.500 IN. Tool I.D.: 4.892 IN. Length: 10 ft effective
Seal Stroke Material: L-80 PART# H297550652 02 01 Baker #SLZXP# Liner Top
Packer w/ HR Profile and 15ft Tie-Back Sleeve Size: 7 IN. 26 lb/ft Thread
Connection: New Vam Pin Down PBR Extension O.D. 8.250 IN. (8.312 IN. Tool
O.D.) PBR Extension I.D.: 7.500 IN. Tool I.D.: 6.276 IN. as per 26# casing Spec
Material: L-80 PART# H296350015 ITEM QUANTITY DESCRIPTION 03 01 Baker
Casing Sub Size: 7 IN. 26lb/ft X 5-1/2 IN. 17lb/ft Thread Connection: New Vam Box
X Pin Tool O.D.: 7.656 IN. Tool I.D.: 4.892 IN. Material: L-80 PART# H494016798 04
01 Baker O-ring Seal Sub Size: 5-1/2 IN. 17 lb/ft X 2.875 IN. Bore Thread
Connection: New Vam Box X Pin Tool O.D.: 7.390 IN. Tool I.D.: 4.000 IN. Material:
L-80 PART# H485355525 05 01 Baker Pup Joint Size: 5-1/2 IN. 17 lb/ft. 6 feet long
Thread Connection: New Vam Box x Pin Tool O.D.: 6.050 IN. Tool I.D.: 4.892 IN.
Material: L-80 PART# H494032302 06 01 Baker #BPV# Set Shoe Size: 5-1/2 IN. 17
lb/ft Thread Connection: New Vam Box X Pin Tool O.D.: 6.050 IN. Material: L-80
PART# H487365502
PACKER; WMPO WEIGHT TYPE,SIZE 7 IN. 26# X 9-5/8 IN, "WMPO" WEIGHT SET
PACKER,LINER,7",NVAM,26#,L80, PACKER, 6 FT LONG TIE-BACK RECEPTACLE CONSISTING OF: MODEL "WMPO"
WEIGHT SET PACKER ,OD 8.375 IN X ID 6.276 IN, FITTED WITH 6 FT LONG TIETBR 6FT
BACK RECEPTACLE, RCB PROFILE OD 8.250 IN, ID 7.375 IN, WITH 7 IN. 26# NEW
VAM PIN, L-80 MATERIAL, NITRILE PACKING ELEMENT.
COLLAR: FLOAT, 13-3/8 IN 72 LB, HC95 GRADE, VAM TOP, W/12.25 IN DRILL OUT
Drilling Equipment
(Casing Accessories &
COLLAR,FLOAT,13-3/8",VAM ID . COLLAR FLOAT; CEMENTING TYPE,STYLE PLASTIC SEAT,13-3/8 IN OD,72
LB/FT,VAM TOP,12.25 IN DRILL ID,WITH PLASTIC VALVE "PDC DRILLABLE"
Cementing
TOP,72#,HC95
Equipment)
Drilling Equipment
(Downhole
Equipment)
Drilling Equipment
(Advanced Well
Completion
Equipment)
PDHMS,3-1/2,EUE,DUAL
GAUGE,P+T
ASSEMBLY; MONITORING TYPE,PERMANENT DOWNHOLE, DUAL, 3-1/2 IN KIT
COMPONENTS
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000751071
1000771958
1000624815
1000757802
125
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
521
Category
Drilling Equipment
(Downhole
Equipment)
522
Drilling Equipment
(Downhole
Equipment)
523
Drilling Equipment
(Downhole
Equipment)
2015
Material Description
Material Long Description
PACKER,SWELL,51/2X8.50"OH,NVAM,17#,L80
PACKER PRODUCTION; SWELL TYPE,FOR OIL,5.5 IN OD,4.892 IN ID,17 PPF,NEW
VAM COONECTN,SWELLPACKER, 5.5 IN X 8 IN X 3 M, BASEPIPE OD: 5.5 IN,
BASEPIPE WEIGHT: 17 PPF, BASE MATERIAL: L80, THREAD TYPE: NEW VAM, END
RING MATERIAL: ST52, PACKER ELEMENT OD: 8 IN, PACKER ELEMENT LENGTH:
118.1 IN, TOTAL PACKER LENGTH: 236.2 IN, PACKER DRIFT ID: 4.767 IN, PACKER
NOMINAL ID: 4.892 IN, MINIMUM HANDLING SPACE BOX END: 47 IN, MINIMUM
HANDLING SPACE PIN END: 47 IN, COUPLING LENGTH: 11.693 IN, COUPLING OD:
6.075 IN, ENDRING LENGTH: 3.1 IN, ENDRING OD: 7.98 IN, MAX H2S LEVEL STD.
POLYMER: 0.5 %, HOLE SIZE: 8.5 IN
PACKER: PRODUCTION, FOR 4-1/2 IN, 9.5-12.6 LB/FT CASING 'TWR' WITH BIG
BORE, L-80 MATERIAL. PACKER PRODUCTION; 'TWR' PERMA-SERIES TYPE,FOR
H2S, CO2,HYDRAULIC SETTING TOOL ACTIVATI,3.79 IN MAX OD,2.375 IN ID,4-1/2
IN OD,9.5-12.6 LB/FT,2-7/8 IN CONNECTN,6.5 LB/FT,API EUE PIN
COONECTN,10,570 PSI SUPPLY,NACE MR-0175 KITS COMPONENTS: ITEM QTY
DESCRIPTION 01 01 EA TWR WIRELINE-SET PERMA-SERIES® PRODUCTION
PACKER, RATCH-LATCH HEAD, TUBING THREAD, 4 1/2 IN. 9.5-12.6 AND 5 IN. 23.224.2 LB/FT WEIGHT RANGE, 3.000 IN. SEAL BORE ID-MIN, 9CR-1MO MATL, 80000
PACKER,PROD,4-1/2X2PSI MIN YIELD, NITRILE RUBBER ELEMENT MATL, 3.790 IN. MAX OD, 2.375 IN.
7/8,EUE,6.5#,PER
MIN ID, 58.50 IN. LENGTH, H2S/CO2 SERVICE, 40-325 DEG. F, 10570 PSI PRESSURE
RATING, 2 7/8-6.50 API-EU PN: 101391704 (OLD PN: 212TWR4502-A) 02 01 EA
RLV RATCH-LATCH® SEAL ASSEMBLY WITH VTR SEAL, 3.000 IN. SEAL BORE ID-MIN,
9CR-1MO MATL, VITON/TEFLON/RYTON SEAL MATL, 2 7/8 API-EU BOX, 3.185-8
RTH LTH LH LATCH TYPE, 3.705 IN. MAX OD, 2.330 IN. MIN ID, 37.50 IN. LENGTH,
100-450 DEG. F, 7600 PSI PRESSURE RATING, H2S/CO2 SERVICE PN: 101391817
(OLD PN: 213RLV82-C)
PACKER; ZXP LINER TYPE,#ZXP LINER TOP PACKER 7 IN 29 LB/FT X 9-5/8 IN 47-53.5
# , W/HOLD DOWN SLIPS#SIZE : 7 INCH X 9-5/8 INCH 47.0-53.5 # #RUNNING TOOL
PACKER,LINER,7",VTOP,29#,110K : MECHANICAL "RH"#EXTENSION LENGTH : 15 FT #EXTENSION ID : 7.375 IN #MAX
TOOL OD : 8.312 IN #MIN TOOL ID : 6.100 INCH #ELEMENT RATING :10,000 PSI AT
SI,TBR 15FT
400 F #ELEMENT RATING: 17BPM CIRCULATION RATE #THREAD : 7 INCH 29# VAM
TOP KSY MYS #MATERIAL : 33 RC , 110 KSY MYS .
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000769400
1000589638
1000891296
126
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
524
Drilling Equipment
(Casing Accessories &
Cementing
Equipment)
525
Drilling Equipment
(Downhole
Equipment)
2015
Material Description
Material Long Description
COLLAR,FLOAT,95/8",NK3SB,53.5#,T95
COLLAR: FLOAT; 9-5/8 IN 53.5 LB; T95 GRADE, NK-3SB W/8.5 IN DRILL OUT ID
COLLAR FLOAT; CEMENTING TYPE,STYLE PLASTIC SEAT,9-5/8 IN OD,53.5 LB/FT,NK3SB,8.5000 IN DRILL ID,WITH PLASTIC VALVE, T95 GRADE "PDC DRILLABLE"
PACKER; ANNULUS CASING TYPE,SIZE: 24 IN, 4 FT DRVS, 25.90 IN OD, 176 PPF, XPACKER,ACP,24",RL4S,176#,X42,
42, RL-4S
4FT
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000022859
1000830133
127
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
Material Description
526
Drilling Equipment
(Downhole
Equipment)
HANGER,LINER,7X95/8,VTHC,32#,41XX,58.4#
527
Drilling Equipment
(Advanced Well
Completion
Equipment)
LINE,FIBER OPTIC,50/125
SIZE,FOR DTS
2015
Material Long Description
HANGER LINER; 7-5/8 IN END 1,9-5/8 IN END 2,58.4 LB END2,RECEPTACLE) : 8.210
IN, NOMINAL OD (ELASTOMERS) : 8.205 IN,SEAL BORE ID-MIN (TIE-BACK
RECEPTACLE) : 7.624 IN, SEAL BORELENGTH -MAX (TIE-BACK RECEPRACLE) :
118.800 IN, MAXIMUM OD(SETTING SLEEVE) : 8.210 IN, NOMINAL ANNULAR BY
PASS AROUNDLINER HANGER (S.Q INCH): 2.993, MINIMUM ID: 6.780 IN,
NOMINALLENGTH : 347.248 IN, SETTING PRESSURE : 2745 PSI, BURST
PRESSUREABOVE ELASTOMERS (CALC) : 7468 PSI, BURST PRESSURE
ABOVEELASTOMERS REMARKS: 7-7/8 HST-DS-BOX, COLLAPSE PRESSURE
ABOVEELASTOMERS (CALC): 5309 PSI, COLLAPSE PRESSURE REMARKS : 7-7/8HSTDS PIN TENSILE RATING ABOCE ELASTOMERS (CALC) : 385178 LBS,TENSILE
RATING ABOVE ELASTOMERS REMARKS : 7-7/8 HST-DS PIN,BURST PRESSURE
BELOW ELASTOMERS (CALC) : 8313 PSI, BURSTPRESSURE BELOW ELASTOMERS
REMARKS : 7.509 HST-DS BOX COLLAPSEPRESSURE BELOW ELASTOMERS (CALC):
8726 PSI, COLLAPSE PRESSUREBELOW ELASTOMERS REMARKS: BODY -POST
EXPANSION 58.4 LB, TENSILERATING BELOW ELASTOMERS (CALC ) : 747500 LB,
TENSILE RATINGBELOW ELASTOMERS REMARKS : 7.509 HST-DS PIN, TORQUE
RATINGMAXIMUM (FT-LBS) : 71043, TORQUE RATING REMARKS : 7.509 HSTDSPIN HYDRAULIC SETTING TOOL-OPTION : 10152189(59VRT7096300),CONES
FOR OPTION 1 HYDRAULIC SETTING TOOL: 101625471 59V960049,REMARKS:
ADJUSTING SLEEVE 101637127 (59V960092) IS REQUIRED TORUN LINER HANGER
ID LENGTH MAX (TIE LINER HANGER ASSY VLH, 7-5/8IN 32-35 LB X 9-5/8 BACK
RECEPTACLE : 122.78 IN, 58.4 LB, TYPE:IN, EQUIPMENT NUMBER: 101633851,
PART NUMBER: STANDARD, CASINGSIZE: 59VF70965800-A 9-5/8 IN CASING
WEIGHT: 58.4 LB, MATERIAL:41XX LOW ALLOY STEEL, ELEMENT MATERIAL:
FLUOROCARBON RUBBER,TEMPERATURE RATING: 40 TO 275 DEG F, SERVICE:
STD, BOTTOMTHREAD: 7, CONNECTION TYPE: PIN, MAKE-UP TORQUE, LINER
HANGER :4528 FT-LBS (MINIMUM), BODY -UPPER(FT-LBS):
5032(OPTIMUM),5535(MAXIMUM) FOR 7-7/8 HST-DS, MAKE -UP TORQUE,LINER
HANGER :9043 FT-LBS (MINMUM), BODY -LOWER(FT-LBS) :
10048(OPTIMUM),11053(MAXIMUM) FOR 7.509 DS-HST, MAXIMUM OD: 8.21 IN,
MAXIMUM
COMPONENTS
LINE; FIBER OD(TIE-BACKKIT
OPTIC (GRADED INDEX
MULTI-MODE) TYPE,SIZE 50/125,CARBON
POLYIMIDE,DISTRIBUTED TEMPERATURE FIBER OPTIC FOR SCHLUMBERGER
DISTRIBUTED TEMPERATURE SYSTEM. GEN II - 50/125 CARBON/POLYAMIDE MM
OPTICAL FIBER. FIBER TYPE: GRADED INDEX MULTI- MIODE, MAXIMUM
OPERATING TEMPERATURE: 175 DEF C, FIBER COATING MATERIAL: CARBON
POLYIMIDE.
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000828160
1000845762
128
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
528
529
530
531
532
2015
Category
Material Description
Material Long Description
TOOL; STAGE TYPE,SIZE 13-3/8 IN,ESIPC-P, 72-86 LBS/FT, VAM TOP - Q-125
COLLAR, TYPE P ES INFLATABLE PACKER, 13- 3/8 IN VAM TOP 72-86 LBS/ FT,
METAL BLADDER PACKER, SUITABLE FOR USE WITH Q-125 HC, CASING SIZE: 13Drilling Equipment
3/8 IN, TYPE: P ESIPC, CASING WEIGHT: 72-86 LBS/FT, THREADER: VALLOUREC,
(Casing Accessories & DV TOOL,13-3/8",VAM TOP,72- CASING THREAD: VAM TOP, GRADE: Q-125HC, DRILL OUT ID: 12. 279 IN, LENGTH:
Cementing
86#,Q125,MEC
82.07 IN, NET WEIGHT: 1031.9, MAX OD: 15.25 IN, PACKER TYPE: METAL, BURST
Equipment)
PRESSURE: 10233 PSI, COLLAPSE PRESSURE: 10233 PSI, PRIMARY OPENING
PRESSURE: 325 PSI, SECONDARY OPENING PRESSURE: 2200 PSI, CLOSING
PRESSURE: 910 PSI, TENSILE STRENGTH: 2601.631 KSI
Drilling Equipment
(Downhole
Equipment)
Drilling Equipment
(Downhole
Equipment)
Drilling Equipment
(Downhole
Equipment)
Drilling Equipment
(Downhole
Equipment)
LINER; NON-CEMENTED DEPLOYMENT, KIT TYPE,SIZE 4-1/2 INCH,C-SERIES
HYDRAULIC LINER SYSTEM, COMPLETE ASSMBLY WITH ITEMS AS DESCRIBED IN
KITS SECTION MUST BE BOXED AS AN INDIVIDUAL UNIT FOR SHIPMENT AND
STORAGE PER SAUDI ARAMCO PACKAGING SPEC 844418. MANUFACTURER MUST
BAR CODE IDENTIFY EACH ISSUE UNIT ON BOTH THE MATERIAL AND OUTSIDE
KIT,LINER,41/2X7",NVAM,12.6#,NCEMENTE THE CONTAINER IN WHICH THE ISSUE UNIT IS CONTAINED. CODE TO BE IN THE
INTERNATIONAL CODE 39 BAR CODING SYSTEM FORMAT AND ADHERE TO ANSI
D
MH10.8 ( LATEST EDITION) SPECIFICATION (LESS SECTIONS 12 & 13). BAR CODE
TAG MUST INCLUDE THE SAUDI ARAMCO STOCK NUMBER AND PURCHASE ORDER
NUMBER. ALL ITEMS SHOULD BE ASSEMBLED TOGETHER PRIOR TO TESTING. KIT
COMPONENTS
HANGER,LINER,9-5/8X133/8,NK3SB,58.4#,HY
HANGER LINER; HYDRAULIC ACTIVATI,9-5/8 IN END 1,53.5 LB/FT END 1,13-3/8 IN
END 2,48-98 LB/FT END 2,NEW VAM PIN X PIN END CONN KIT COMPONENTS
HANGER LINER; 4-1/2 INCH END 1,NA END 2,TIW OFF BOTTOM LINER ASSEMBLY
KIT,LINER,4WITH IB-TC HYDRO HANGERWITH S-10 LINER TOP PACKER AND ECP INFLATABLE
1/2,NVAM,11.6#,L80,CEMENTED
PACKER ASSEMBLY. KIT COMPONENTS
PACKER PRODUCTION; STAGE FRAC SYSTEM, FRAC STAGE ASSEMBLY TYPE,7.750
IN MAX OD,4.700 IN MIN ID,9-5/8 IN OD,43.5 - 58.4 LB/FT,5-1/2 IN CONNECTN,20
LB/FT,VAM TOP HC BOX X PIN, C/W COONECTN,10,000 PSI WORKING PRESSURE
SUPPLY,FOR OPEN HOLE: 8-3/8 IN - 8-1/2 IN, MATERIAL: P-110, PULL STRENGTH
KIT,FRAC,5-1/2X8.5",VTHC,PK-SL- THROUGH TOOL: 514,000 LBS, BURST PRESSURE: 10,750 PSI COLLAPSE PRESSURE:
PJ-CN
10,300 PSI, EFFECTIVE SHEAR AREA: 8.500 IN2, SHEAR PRESSURE PER PIN: 341
PSI, MAX SHEAR PRESSURE: 4,092 PSI, MAX NUMBER OF SHEAR PINS: 12 PINS,
OVERALL LENGTH: 69.900 IN, WEIGHT: 322.79 LBS, ELASTOMER MATERIAL: HSN
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000828584
1000794892
1000825383
1000904741
1000823559
129
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
533
Drilling Equipment
(Downhole
Equipment)
534
Drilling Equipment
(Downhole
Equipment)
2015
Material Description
Material Long Description
PACKER, LINER: PACKER, LINER TOP, TYPE SN-12-AT HI-LOAD FOR GEN-1 AND GEN2, 4-1/2 IN LINERS W/ TYPE LG-12 PACKER LINER; PACKER, LINER TOP, TYPE SN-12AT HI-LOAD FOR GEN-1 AND GEN-2, 4-1/2 IN LINERS W/ TYPE LG-12 TBR KIT
COMPONENTS:
VALVE; INTEGRATED HVC CHOKE AND ACCUPULSE TYPE,SIZE 2-7/8 IN,7,500 PSI
SUPPLY,2-7/8 IN, 6.4# NEW VAM END CONN,INCONEL 718 / 4140 BODY,CASING
SIZE: 7 IN. (17# THRU 38#), MAXIMUM OD: 4.665 IN.(5.02 PROJECTED OD OFF
TUBING CENTER LINE), MINIMUM ID: 2.313 IN, LENGTH: 137.3 IN, 2-7/8 IN. 6.4#
(P-110 GRADE) NEW VAM TORQUE FT-LBF: 2,870 MIN, 3,180 OPT., 3,490 MAX, 27/8 IN. 6.4# (L-80 GRADE) NEW VAM TORQUE FT-LBF: 2,160 MIN, 2,390 OPT.,
2,620 MAX, HVC THREAD: 2-7/8 IN, 6.4# NS-CT BOX X PIN THD, 3-1/2 10.2# NSCT
TORQUE FT-LBF: 2,065 MIN, 2,250 OPT., 2,435 MAX, SERVICE: STD/H²S/CO², MAX
WORKING TEMP: 275°F, WORKING PRESSURE INTERNAL: 7,500 PSI, WORKING
PRESSURE EXTERNAL: 7,500 PSI, TEST PRESSURE INTERNAL: 8,000 PSI, TEST
PRESSURE EXTERNAL: 8,000 PSI, MAX. HYDRAULIC PRESSURE: 10,000 PSI,
WORKING HYDRAULIC PRESSURE: 5,000 PSI, HVC CHOKE: 214HVC280003,
VALVE,ICV,2ACCUPULSE: 213APE702801, HVC METALLURGY: 718 INC., FITTING KIT
7/8",NVAM,5K,718,HVC+ACCUPU METALLURGY: 925 INC./4140, ACCUPULSE METALLURGY: 718 INC, FASTENER
L
METALLURGY: 300 SS, ELASTOMERS F/HYD. CHAMBER: V-RINGS E081 (PTFE), ORINGS (CHEMRAZ), BACK UP RINGS E080 (PEEK), ELASTOMERS F/ WELLBORE
FLUID: BACK UP RINGS E080 (PEEK), O-RINGS (VITON), PISTON AREA: 1.783 IN²,
TOTAL STROKE: 6.00 IN, HYD CHAMBER DISPLACEMENT: 10.69 IN³, TENSILE
RATING: 145,000 LBF, COMPRESSIVE RATING: 58,000 LBF, MIN. INTERNAL FLOW
AREA: 4.20 IN², FLOW AREA BETWEEN OD OF HVC AND ID OF CSG. 7 IN. (32#)
(6.094 ID): 14.75 SQ IN TOTAL(.910SQ. IN. OF TOTAL IS DUE TO SLOTS), FLOW
TRIM CHOKE SETTINGS: 11 POSITIONS (1 X FULLY OPEN, 1 X FULLY CLOSED, 9 X
FIXED) 0%, 2.38%, 3.57%, 5.90%, 9.43%, 14.09% 18.75%, 23.41%, 43.63%, 84.06%,
100%, COIL TUBING SHIFTING TOOL: 290HM0231000, ASSY PICTORAL/ BOM
DRAWING: 312499-01-01, TECH DOC: 312025-00-01.
PACKER,TIEBACK,41/2,NK3SB,13.5#,TBR12
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000025007
1000780059
130
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
535
536
537
2015
Category
Material Description
Material Long Description
Material Number
9COM/9CAT
Drilling Equipment
(Downhole
Equipment)
HANGER LINER; HYDRAULIC ACTIVATI,FOR SCREEN HANGING SYSTEM, NONCEMENTED KIT,GR L-80,7 IN END 1,26 LB/FT END 1,9-5/8 IN END 2,40-43.5 LB/FT
END 2,NEW VAM PIN DOWN END CONN,7" 26# TENARIS BLUE PIN X NEW VAM
PIN,'QUANTUM' NON-CEMENTED KIT TYPE, 8.465" OD X 6.240" ID, 40.175 INCH
LONG, 1, COMPLETE ASSEMBLY WITH ITEMS AS DESCRIBED IN KITS SECTION
MUST BE BOXED AS AN INDIVIDUAL UNIT FOR SHIPMENT AND STORAGE PER
SAUDI ARAMCO PACKAGING SPEC 844418, 2-MANUFACTURER MUST BAR CODE
KIT,LINER,7X95/8,TB,26#,HYD,NONCEMENTED IDENTIFY EACH ISSUE UNIT ON BOTH THE MATERIAL AND OUTSIDE THE
CONTAINER IN WHICH THE ISSUE UNIT IS CONTAINED, CODE TO BE IN THE
INTERNATIONAL CODE 39 BAR CODING SYSTEM FORMAT AND ADHERE TO ANSI
MH10.8 ( LATEST EDITION) SPECIFICATION (LESS SECTIONS 12 & 13), BAR CODE
TAG MUST INCLUDE THE SAUDI ARAMCO STOCK NUMBER AND PURCHASE ORDER
NUMBER, ALL ITEMS SHOULD BE ASSEMBLED TOGETHER PRIOR TO TESTING KIT
COMPONENTS
1000807104
Drilling Equipment
(Downhole
Equipment)
PACKER,LINER,7",LTC,2326#,L80,TBR 6FT
PACKER: LINER; TYPE S-6; WITH 6 FT TIE-BACK EXTENSION; . PACKER LINER;
WEIGHT SET TYPE,L-80,TYPE S-6 6 FT TIE-BACK,8.453 IN OD,7 IN LINER OD,23.0 26.0 LB/FT LINER,9-5/8 IN OD,36-40 LB/FT,8-1/4 IN EXT OD,7-3/8 IN EXT ID,LT & C
PIN DOWN COONECTN,API 5B,TO BE RUN ABOVE LINER HANGER, 8.250 IN TOOL
ID, SHEAR PINNED TO 15000 LB SET DOWN WEIGHT TO SET PACKER, TIW PART
NO 516543 EACH S/N MUST BE BOXED AS AN INDIVIDUAL UNIT (SEPARATELY)
1000024961
PDHMS,4-1/2,NVAM,DUAL
GAUGE
UNIT; 4-1/2 IN, DUAL PERMANENT DOWNHOLE TYPE,BAKER HUGHES, 4-1/2 IN
PERMANENT DOWNHOLE MONITORING SYSTEM PDHMS WITH 4-1/2 IN NEW
VAM 12.6 PPF NEW VAM SINGLE CARRIER ITEM NO. QUANTITY DESCRIPTION 1.00
02 SINGLE 1 IN. WELLGUARD QUART PT GAUGE (2 PER WELL) HASTELLOY
HOUSING WITH INCONEL WETED PARTS RESONANT QUARTZ CRYSTAL
ELECTRONICS HOUSING WITH PRESSURE TESTABLE CABLE HEAD 10,000 PSI
PRESSURE RATING 150 DEG C RATING PRESSURE ACCURACY 0.02% FS AND DRIFT
<(><<)> 2 PSI / YR PRESSURE RESOLUTION = 0.01 PSI (TEMP RES 0.01 DEG C) 1.01
02 SINGLE SOLID GAUGE CARRIER (2 PER WELL) 4-1/2 IN. X 12.6 PPF NEW VAM
CONNECTIONS (PIN X PIN) 4140 L80 METALLURGY (YIED STRENGTH 288.000 LBS)
MAX. OD 5.889 IN DRIFT ID 3.833 IN. AND LENGTH OF 79 IN. DRAWING NUMBER:
GAD-00-8483 PART NUMBER: GA-00-8483 1.02 01 WELLHEAD OUTLET (1 PER
WELL) SAUDI ARAMCO APPROVED MODEL (5,000 PSI MINIMUM RATED) ½ IN.
NPT EEXD MODEL 1.03 02 TUBING HUNGER PENETRATOR (2 PER WELL) 3/8 IN.
NPT TO ¼ IN. SWAGELOCK CONNECTION
1000769328
Drilling Equipment
(Advanced Well
Completion
Equipment)
Saudi Aramco: Company General Use
131
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
538
539
2015
Category
Material Description
Material Long Description
COLLAR: FLOAT; 18-5/8 IN.; 87.5-115 LB/FT; K-55; BUTTRESS THREAD BOX UP X
Drilling Equipment
(Casing Accessories & COLLAR,FLOAT,18-5/8",BTC,87.5- PIN DOWN PER COLLAR FLOAT; CEMENTING TYPE,STYLE PLASTIC SEAT,18-5/8 IN
OD,87.5-106 LB/FT,BUTTRESS BOX & PIN THD,17.5000 IN DRILL ID,API 5B,WITH
Cementing
115#,K55
PLASTIC VALVE "PDC DRILLABLE"
Equipment)
Drilling Equipment
(Advanced Well
Completion
Equipment)
PANEL,CONTROL,HYDELE,3WELL,9VALVE,AUTOM
PANEL; CONTROL TYPE,SS AISI 316,NEMA-4X, SCADA COMPATIBLE REMOTELY
OPERATED ELECTRICALLY DRIVEN HYDRAULIC CONTROL UNIT FOR IWC. CAPABLE
OF OPERATING 9 VALVES AND MONITORING PDHMS IN 3 WELLS. POWER
REQUIREMENTS: 110 VAC, 4 KW, SCADA COMMUNICATION PROTOCOL: MODBUS485 OR ETHERNET, PRESSURE: 10000 PSI (MAX), TEMPERATURE RATING: 55 DEG
C (SHELTERED), HYDRAULIC TANK CAPACITY: 30 GAL, FLOW CONTROL VALVE:
SCHLUMBERGER TRFC-HN, PUMP FLOW RATE: 1 L/MIN (MAX), FULLY
COMPATIBLE WITH SAUDI ARAMCO I-FIELD REQUIREMENTS (SEE ATTACHED). THE
SURFACE UNIT SHALL BE E WITH DRAIN VENT CONNECTIONS ARAMCO SAES-J902. SURFACE UNIT SHALL DISPLAY VIA ELECTRONIC VISUAL DISPL CRYSTAL
DISPLAY (LDC) TO DO LOCALLY
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000022883
1000824872
132
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
540
541
2015
Category
Drilling Equipment
(Downhole
Equipment)
Drilling Equipment
(Downhole
Equipment)
Material Description
PDHMS,4-1/2,VTHC,SINGLE
GAUGE,HPHT
Material Long Description
ASSEMBLY; SINGLE HIGH PRESSURE HIGH TEMPERATURE (HPHT) PERMANENT
DOWNHOLE MONITORING (PDHM). TYPE,SIZE: 4-1/2 IN. 1- COMPLETE#ASSEMBLY
WITH ITEMS AS DESCRIBED IN KITS SECTION MUST BE BOXED#AS AN INDIVIDUAL
UNIT FOR SHIPMENT AND STORAGE PER SAUDI ARAMCO#PACKAGING SPEC
844418. 2- MANUFACTURER MUST BAR CODE IDENTIFY#EACH ISSUE UNIT ON
BOTH THE MATERIAL AND OUTSIDE THE CONTAINER#(IN WHICH THE ISSUE UNIT
IS CONTAINED). CODE TO BE IN THE#INTERNATIONAL CODE 39 BAR CODING
SYSTEM FORMAT AND ADHERE TO#ANSI MH10.8M (LATEST EDITION)
SPECIFICATION (LESS SECTIONS 12 &#13). BAR CODE TAG MUST INCLUDE THE
SAUDI ARAMCO STOCK NUMBER AND#PURCHASE ORDER NUMBER. ALL ITEMS
SHOULD BE ASSEMBLED TOGETHER#PRIOR TO TESTING. KIT COMPONENTS: ITEM
QTY DESCRIPTIONS 01 01 SINGLE 4.5#SOLID GAUGE CARRIER PORTED TUBINGSUPER 13 CR,13.5 LB/FT VAM TOP HC CONNECTION PXP, EXTERNALLY TESTABLE
AEMP TO FIT INSIDE 9-5/8#58.4 LB/FT CASING YIELD STRENGTH 95
KPSI,MAXIMUM OD: 5.55#,DRIFT ID : 3.795# DRAWING NUMBER PAD-P2451350049 PART NUMBER : P245135-0049 02 01 SINGLE HIGH PRESSURE/HIGH
TEMPERATURE (175 DEG C,20 KPSI) SURESENS 175 GAUGE READING TUBING
PRESSURE AND TEMPERATURE . QUARTZ SENSOR,CONSTRUCTED ENTIRELY OF
NACE MR0175 COMPLIANT MATERIALS. PHYSICAL PROFILE IS
0.75#DIAMETER/GAUGE. UTILIZES EXISTING HYBRID TECHNOLOGY FOR GAUGE
AND TRANSDUCER ELECTRONIC. PRESSURE RESOLUTION :0.0001 PSI
TEMPERATURE RESOLUTION: 0.0001°C.PRESSURE ACCURACY:±0.02%FULL SCALE.
TEMPERATURE ACCURACY :0.15°C. SAMPLING GATE DURATION(S):<0.1 TO
3.2(CONFIGURABLE) PART NUMBER: P1211-1010 03 01 WELLHEAD OUTLET WITH
# 11 GRAYLOC INTERFACE PRESSURE CONNECTION TO TREE. PRESSURE RATING :
10,000 PSI 04 01 TUBING HANGER PENETRATORS(2 PER WELL) TWO OFF INCOLOY
725 3/8# NPT TO 1/4# SWAGELOCK CONNECTION.
REAMER; TURBOCASER TYPE,7 IN 26#, N VAM DIA,7 INCH TURBOCASER EXPRESS
TOOL WITH NEW VAM CONNECTION. MAX BODY OD: 7.67 INCH. TOP
REAMER,TURBOCASER,7",NVAM, CONNECTION: 7 INCH NEW VAM, 26 PPF. TOOL WEIGHT: 706 LB. REAMER BIT OD:
8.25 INCH. OVERALL LENGTH: 11.1 FT. REAMER PERFORMANCE
26#,8.250"OD
CHARACTERISTICS: FLOW RANGE: 0 - 500 GPM. MAX TORQUE ON BIT: 720 LB-FT.
MAX POWER OUTPUT: 80 HP. MAX PRESSURE DROP: 836 PSI.
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000837756
1000888048
133
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
Material Description
542
Drilling Equipment
(Downhole
Equipment)
TUBING,COILED,23/8"TAPERED.156/.204#WT
543
Drilling Equipment
(Advanced Well
Completion
Equipment)
SCREEN,SPIRAL,51/2",VAGT,17#,300MIC,316
Material Long Description
TUBING; COILED, TAPERED TYPE,2-3/8 IN OD,18000 FT LG,CONTINUOUSLY
MILLED STRING,GR HS-90,THE UNDERBALANCED 2-3/8 IN OD HS90
CONTINUOUSLY MILLED STRING COILED TUBING IS TAPERED AS FOLLOWS: (1)
0.156 IN WALL THICKNESS SECTION (2375-156-9-C): 4,000 FT LONG. (2) 0.175 IN
WALL THICKNESS SECTION (2375-175-9-C): 2,000 FT LONG. (3) 0.190 IN WALL
THICKNESS SECTION (2375-190-9-C): 5,000 FT LONG. (4) 0.204 IN WALL
THICKNESS SECTION (2375-204-9-C): 7,000 FT LONG. THE TOTAL LENGTH IS
18,000 FT. IT WILL BE PROVIDED WITH 7/16 IN OD, 7 CONDUCTORS, ELECTRIC
CABLE (HEPTACABLE). KIT COMPONENTS
SCREEN; LINE SLOT TYPE,SIZE 5.5 INCH,5.50# LINESLOT, 0.012# GAUGE,
300UM/316L, SPIRAL, 17.0LB/FT, VAGT, RANGE 3, L80
544
Drilling Equipment
(Downhole
Equipment)
KIT,FRAC,51/2X8.500"2OH,VTHC,20#,PK
545
Drilling Equipment
(Downhole
Equipment)
HANGER,LINER,7X95/8,THS563,26#,125,HYD
546
Drilling Equipment
(Casing Accessories &
Cementing
Equipment)
SHOE,FLOAT,13-3/8",VAM
TOP,72#,HC95
2015
PACKER PRODUCTION; STAGE FRAC SYSTEM, BLANK STAGE ASSEMBLY TYPE,7.750
IN MAX OD,4.700 IN MIN ID,9-5/8 IN OD,43.5 - 58.4 LB/FT,5-1/2 IN CONNECTN,20
LB/FT,VAM TOP HC BOX X PIN, C/W COONECTN,10,000 PSI WORKING PRESSURE
SUPPLY,FOR OPEN HOLE: 8-3/8 IN - 8-1/2 IN, MATERIAL: P-110, PULL STRENGTH
THROUGH TOOL: 514,000 LBS, BURST PRESSURE: 10,750 PSI COLLAPSE PRESSURE:
10,300 PSI, EFFECTIVE SHEAR AREA: 8.500 IN2, SHEAR PRESSURE PER PIN: 341
PSI, MAX SHEAR PRESSURE: 4,092 PSI, MAX NUMBER OF SHEAR PINS: 12 PINS,
OVERALL LENGTH: 69.900 IN, WEIGHT: 322.79 LBS, ELASTOMER MATERIAL: HSN
KITS COMPONENTS:
HANGER LINER; HYDRAULIC ACTIVATI,7 IN END 1,26 PPF END 1,9-5/8 IN END 2,40 47 PPF END 2,HYDRIL 563 END CONN,7 IN 26 PPF HYDRIL 563,7 IN, 26 PPF X 9-5/8
IN 40-47 PPF CONTROL SET LINER HANGER WITH ZXP LINER TOP PACKER AND
SETTING SLEEVE. KIT COMPONENTS
SHOE: FLOAT; 13-3/8 IN. 72 LB; HC95 GRADE, VAM TOP, W/12.25 IN. DRILL OUT
ID SHOE FLOAT; CEMENTING TYPE,FOR CEMENTING TOOL,PLASTIC SEAT,GR
HC95,13-3/8 IN CASING OD,72.0 LB/FT,VAM TOP CONNECTN,WITH PLASTIC
VALVE, 12-1/4 IN DRILL OUT ID "PDC DRILLABLE"
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000885164
1000919001
1000823558
1000847744
1000624831
134
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
547
2015
Category
Drilling Equipment
(Downhole
Equipment)
Material Description
Material Long Description
VALVE; INTEGRATED HVC CHOKE AND ACCUPULSE TYPE,SIZE 3-1/2 IN,7,500 PSI
SUPPLY,3-1/2 9.3# API E.U.E. B X P THD END CONN,INCONEL 718 / 4140
BODY,CASING SIZE: 7 IN. (17-32 #), MAXIMUM OD: 5.855 IN, MINIMUM ID: 2.75
IN, LENGTH: O.A.L. 136.25 IN, 3-1/2 9.3# API EUE 80K MAT'L CONNECTION
TORQUE (FT-LBS):2,400 MIN, 3,200 OPT., 4,000 MAX, HVC CONNECTION: 3-1/2
10.2# NS-CT B X P THD, 3-1/2 10.2# NS-CT 80K MAT'L CONNECTION TORQUE, (FTLBS): 2,530 MIN., 2,890 OPT., 3,250 MAX, SERVICE: STD/H²S/CO², MAX WORKING
TEMP.,275°F, WORKING PRESSURE INTERNAL: 7,500 PSI, WORKING PRESSURE
EXTERNAL: 7,500 PSI, TEST PRESSURE INTERNAL: 8,000 PSI, TEST PRESSURE
EXTERNAL: 8,000 PSI, MAX. HYDRAULIC PRESSURE: 10,000 PSI, WORKING
HYDRAULIC PRESSURE: 7,500 PSI, MAX. DIFF UNLOADING PRESSURE: 5,000 PSI,
VALVE,ICV,3HVC CHOKE: 214HVC350022, ACCUPULSE: 213AP1350004, HVC METALLURGY:
1/2",NVAM,5K,718,HVC+ACCUPU 718 INC. / 4140, FITTING KIT METALLURGY: 4140 (80K YIELD), ACCUPULSE
L
METALLURGY: 9CR, FASTENER METALLURGY: 300 SS, TYPE OF SEALS: NONELASTOMERS AND ELASTOMERS, ELASTOMERS F/HYD. CHAMBER: CHEMRAZ,
ELASTOMERS F/ WELLBORE FLUID: VITON, PISTON AREA: 2.075 SQ. IN, TOTAL
STROKE: 6.00 IN, HYD CHAMBER DISPLACEMENT: 12.45 CU. IN, TENSILE RATING:
202,220 LBF, COMPRESSIVE RATING: 200,000 LBF, MIN. INTERNAL FLOW AREA:
5.94 SQ.IN, FLOW AREA BETWEEN OD OF HVC AND ID OF CSG 7 IN. (17#) (6.538
ID): 9.23 SQ IN TOTAL(2.58 SQ. IN. OF TOTAL IS DUE SLOT), FLOW TRIM CHOKE
SETTINGS: 11 POSITIONS (1 X FULLY OPEN, 1 X FULLY CLOSED, 9 X FIXED) 0%,
2.38%, 3.57%, 5.90%, 9.43%, 14.09% 18.75%, 23.41%, 43.63%, 84.06%, 100%,
COIL TUBING SHIFTING TOOL: 290HM0275000, ASSY PICTORAL/ BOM DRAWING:
312557-03-01, TECH DOC: 312025-00-01.
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000780058
135
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
548
549
2015
Category
Drilling Equipment
(Advanced Well
Completion
Equipment)
Drilling Equipment
(Casing Accessories &
Cementing
Equipment)
Material Description
Material Long Description
Material Number
9COM/9CAT
PANEL,CONTROL,HYDELE,1WELL,4VALVE,AUTOM
PANEL; CONTROL, AUTOMATED MULTI-VALVE, 4 VALVE, 1 WELL TYPE,SIZE 56.13
IN HT X 57 IN WD X 40 IN DP,SS AISI 316,ENCLOSURE: NEMA 4X (XPIO) / (IP 56),
POWER REQUIREMENTS: 110/220 V, 60 HZ, WORKING PRESSURE: 6000 PSI WITH
SURFACE DATA LOGGER, NUMBER OF WELLS: 1 (MAX), MAXIMUM NUMBER OF
VALVES: 4 DOWNHOLE CONTROL VALVES, MAXIMUM NUMBER OF DOWNHOLE
GAUGES: 4, WORKING TEMPERATURE: 65 DEG C UNDER SHELTER, AS PER
ARAMCO I - FIELD REQUIREMENTS FOR THE SURFACE DATA LOGGER AND
ATTACHMENT A. SURFACE DATA LOGGER TECHNICAL DESCRIPTION, MAXIMUM
NUMBER OF DOWNHOLE GAUGES: 4, POWER SUPPLY OPTIONS: AC/DC, POWER
CONSUMPTION: 14 W + 1 PER DOWNHOLE GAUGE, MEMORY CAPACITY: 4 MB ON
ONBOARD AND 2 GB COMPACT FLASH, COMMUNICATION PORTS: RS-232, RS-485
AND ETHERNET PORT.
1000827654
DV TOOL,18-5/8",BTC,87.594.5#,L80,MEC,4
TOOL; CEMENTING TYPE,SIZE 18-5/8 IN,W/FREE-FALL PLUG SET, MODEL 781P4
L80, 87.5-94.50 LB/FT, A5 ELEMENT, INFLATABLE PACKOFF TWO STAGE, CASING
SIZE: 18-5/8 CASING WEIGHT RANGE: 87.5-94.5 LB/FT, CASING GRADE: L-80,
THREADS: BUTTRESS (BTC), ELEMENT MATERIAL: A5, PDC DRILLABLE: YES, O.D
(MAXIMUM): 21.625 IN, PACKER ELEMENT O.D: 20.50 IN, DRILL OUT I.D: 17.659
IN, DRIFT: 17.567 IN, LENGTH OVERALL: 11.8 FT, PACKER ELEMENT LENGTH: 4FT,
OPENING SEAT I.D: 15.500 IN,CLOSING SEAT I.D: 15.125 IN, OPENING PRESSURE
(INNER SLEEVE MOVES TO INFLATE PACKER): 200-500 PSI, PACKER SETTING
PRESSURE (EXTERNAL SLEEVE OPENING), PRESSURE: 400-800 PSI, 8 SCREWS AT
175 PSI SCREW, STAGE TOOL SEALS: FLUOROCARBON O-RING SEALS, CEMENTING
PORTS: SIX 1-1/8 DIA.PORTS, INTERNAL PRESSURE: 2,930 PSI, MAXIMUM
EXTERNAL PRESSURE: 780 PSI, SAFE LOAD BELOW TOOL: 1,312,000 LBS. (S.F. 1.5),
MAXIMUM TEMPERATURE: 250 DEG. F.
1000839640
Saudi Aramco: Company General Use
136
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
550
2015
Category
Drilling Equipment
(Downhole
Equipment)
Material Description
Material Long Description
Material Number
9COM/9CAT
PACKER,PROD,7X31/2,NVAM,9.2#,13CR,FTHRU
PACKER PRODUCTION; RETRIEVABLE, PREMIER FEED-THROUGH TYPE,HYDRAULIC
SET ACTIVATI,5.980 IN OD OD,2.945 IN ID NOM. ID,7 IN OD,26-29 LB/FT,3-1/2 IN
CONNECTN,9.2 PPF,NEW VAM BOX X PIN COONECTN,7500 PSI SUPPLY,ISOSPEC.14310,WITH 7 EA. X 1/4 IN CONTROL LINE PORTS, MATERIALS: 13%
CHROME, 80 KSI MYS, ELASTOMERS: NITRILE PE, TEMP. RATING: 65-350°F MAX.
THE PACKER SHOULD BE THREADED DIRECTLY PRODUCTION STRING AND SET IN
ONE TRIP BY PRESSING UP AGAINST A PLUGGING DEVICE BELOW THE PACKER.
REMOVAL ON THE PRODUCTION STRING IS ACCOMPLISHED BY USE OF A THRUTUBING SHIFT TOOL OR THRU-TUBING CUTTER. THIS MUST BE SUITED FOR
MULTIZONE STACKED PACKER, INTELLIGENT/SMART WELL COMPLETIONS. KIT
COMPONENTS DESCRIPTION ITEM QTY SUB: HYDRAULIC 01 01 SPLICE FOR TOP
AND BOTTOM PF THE PACKER. SIZE: 3-1/2 IN. THREAD: 3-1/2 IN. 9.2 PPF AM NEW
VAM BOX X PIN, TOOL OD: 6.00 IN. TOOL ID: 2.953 IN. LENGTH: 43 IN. MATERIAL:
4140 LOW ALLOY, 80 KSI MYS THIS 3-1/2" SPLICE SUB IS TO ACCOMMODA 5X1/4"
& 1X1/4" ELECTRICAL SPLICE CONNECTIONS PART NO.: H781273508 KIT
COMPPNENTS: ITEM QTY DESCRIPTION 01 01 SUB: HYDRAULIC SPLICE FOR TOP
AND BOTTOM PF THE PACKER.SIZE: 3-1/2 IN. THREAD: 3-1/2 IN. 9.2 PPF AM NEW
VAM BOX X PIN, AM NEW VAM BOX X PIN, TOOL OD: 6.00 IN. LENGTH: 43
IN.MATERIAL: 4140 LOW ALLOY 80 KSI MYS THIS 3-1/2" SPLICE SUB IS TO
ACCOMMODA SPLICE SUB IS TO ACCOMMODA 5X1/4" <(>&<)> 1X1/4"
ELECTRICAL SPLICE CONNECTIONS PART NO.: H781273508
1000781980
Saudi Aramco: Company General Use
137
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
551
Drilling Equipment
(Downhole
Equipment)
552
Drilling Equipment
(Downhole
Equipment)
553
Drilling Equipment
(Downhole
Equipment)
554
Drilling Equipment
(Downhole
Equipment)
2015
Material Description
Material Long Description
PACKER; 24.00 IN SLIMLINE CLEARANCE ACP W/4 FT ELEMENT, NOMINAL CASING
ID: 22.50, CASING THREADS: ANSI BUTTRESS PIN UP X BLANK PIN DOWN, ACP
OD:25.90 IN, ACP LENGTH :125.0 IN, BURST RATING ON CASING :(API SPEC)3,060
PSI, VALVE BODY MATERIAL 1026 (55,000 PSI YIELD STRENGTH), VALVE BODY
BURST AFTER INFLATION SEQUENCE IS COMPLETED AND THE CLOSING VALVE
HAS CLOSED, ULTIMATE BURST 3,300 PSI, RECOMMENDED MAXIMUM WORKING
PRESSURE 80% OF BURST OF CASING 2,450 PSI, TENSILE YIELD OF THE ACP2,450,000 LBF, COLLAPSE RATING OF THE ACP -1,450 PSI, DIFFERENTIAL RATING
OF ACP IN 28.50 IN ID-1500 PSI, MECHANICAL STAGE TOOL, CASING SIZE : 24 IN,
PACKER,ACP,24",BW,176#,4FT CASING WEIGHT RANGE :176.00 LB/FT (PE), CASING GRADE: X-56, THREADS
:BUTTWELD (PREPPED FOR WELD ON CONNECTION SUCH AS VETCO RL-4S ),
O.D.(MAXIMUM): 25.125 IN, DRILL OUT I.D.: 22.250 IN, LENGTH OVERALL: 44.5 IN
(APPROXIMATE), OPENING SEAT I.D.: 17.250, CLOSING SEAT I.D.: 19.960,
OPENING PRESSURE: 400-600 PSI, CLOSING PRESSURE: 800-PSI, STAGE TOOL
SEALS: STRILE O-RING SEALS, CEMENTING PORTS: SIX 1-1/8 DIA.PORTS,
MAXIMUM INTERNAL PRESSURE : 217 PSI, MAXIMUM EXTERNAL PRESSURE :1083
PSI, SAFE LOAD BELOW TOOL: 1361000 LBS.(S.F1.5), MAXIMUM TEMPERATURE
:275 DEG F, ALL ITEMS SHOULD BE ASSEMBLED TOGETHER PRIOR TO TESTING KIT
COMPONENTS
PACKER PRODUCTION; OH SWELL PACKER TYPE,8.000 IN OD,4.892 IN ID,8-1/2 IN
OPEN HOLE OD,5-1/2 IN CONNECTN,17.0 PPF,NEW VAM BOX X PIN COONECTN,5PACKER,SWELL,51/2X8.50"OH,NVAM,17#,L80 1/2 IN SWELL REPACKER, BASE PIPE MATERIAL: L-80 STEEL, SEAL MATERIAL: OIL
SWELL ELEMENT, SEAL LENGTH: 20 FT, JOINT LENGTH: 30 FT.
TUBING,COILED,23/8",TAPERED.134/.204"WT
TUBING; COILED, STRING, TAPERED HS-90 TYPE,2-3/8 IN OD,18,000 FT LG,GR HS90,CONTINUOUSLY MILLED STRINGS OD ARE TAPERED ASFOLLOW: 0.134 IN WALL
THICKNESS SECTION -3,500FT(2375-134-9-C) 0.145 IN WALL THICKNESS SECTION 2,000FT(2375-145-9-C), 0.156 IN WALL THICKNESS SECTION -2,000FT(2375-156-9C), 0.175 IN WALL THICKNESS SECTION -2,000FT(2375-175-9-C), 0.190 IN WALL
THICKNESS SECTION -5,000FT(2375-190-9-C), 0.204 IN WALL THICKNESS SECTION 3,500FT(2375-204-9-C), WITH 7/16 IN OD 7-CONDUCTORS ELECTRIC CABLE
(HEPTACABLE) INSTALLED EXTRA LENGTH FOR SLACK
LAUNCHER; COMPACT TYPE,SIZE 5-1/2 IN 18.24 IB/FT X 7 IN 26 LB/FT,SOLID
LAUNCHER,5EXPANDABLE TUBULAR (SET), COUPLED WITH CONNECTION SLEEVE, MATERIAL:
1/2X7,XPC,18.24#,COMPACT,SES EX-80, CONNECTION: ENVENTURE PROPRIETARY XPC PIN UP LENGTH: 6 FT
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000820392
1000845069
1000823039
1000819335
138
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
555
Drilling Equipment
(Downhole
Equipment)
556
Drilling Equipment
(Downhole
Equipment)
557
Drilling Equipment
(Downhole
Equipment)
2015
Material Description
Material Long Description
PACKER, LINER: LINER, TOP ISOLATION PACKER, TYPE JMZX 5 IN 18 LB/FT NEW
VAM PIN,TOOL OD 5.819 IN X TOOL ID 4.276 X PACKER LINER; LINER, TOP
PACKER,TIEBACK,5",NVAM,18#
ISOLATION PACKER, TYPE JMZX 5 IN 18 LB/FT NEW VAM PIN,TOOL OD 5.819 IN X
TOOL ID 4.276 X SEAL OD 5.250 IN
VALVE; LARGE BORE FLAPPER TYPE,SIZE 9-5/8 IN,ID: 4.990 IN, OD: 8.237 IN,
VALVE,ISOL,7",NVAM,174PH,4.9 OVERALL LENGTH: 23 IN, LOWER THREAD: 7 IN NEW VAM PIN, UPPER THREAD: 7
90"ID
IN NEW VAM BOX, ACTIVE FLOW WETTED MATERIAL: 17-4 PH, ALL ITEMS
SHOULD BE ASSEMBLED TOGETHER PRIOR TO TESTING
VALVE; TUBING-RETRIEVABLE SUBSURFACE SAFETY (FLAPPER) TYPE,SIZE 3-1/2
IN,3 1/2-9.20 NEW VAM BOX X3 1/2-9.20 NEW VAM PIN END CONN,9CR1MO/410/17-4PH BODY,NACE MR0175/ISO 15156,API-1 NACE MR-01-75/,ISO
1515 API MONOGRAMMED,API-14A,CLOSURE TYPE FLAPPER. SIZE 3 ½. LOCK
PROFILE: X. MIN ID WITHOUT PACKING BORE: 2.840 INCH. TOP SEAL BORE IDMIN: 2.813 INCH. BOTTOM SEAL BORE ID MIN: 2.813 INCH. MAX OD: 5.20 INCH.
LENGTH: 56.08 INCH. MATERIAL: 9CR-1MO/410/17-4PH. SERVICE: H2S. SERVICE
REMARKS: H2S SERVICE BASED ON CUSTOMER DEFINED, WELL SPECIFIC
CONDITIONS. APPLICATIONS MUST BE REVIEWED FOR SPECIFIC ENVIRONMENTAL
COMPATIBILITY. MEETS MATERIAL SERVICE REQUIREMENTS OF: NACE
MR0175/ISO 15156. TOP THREAD: 3 ½ IN, 9.20 PPF VAM-NEW. BOTTOM THREAD:
3 ½ IN, 9.20 PPF VAM-NEW. CONNECTION TYPE: BOX-PIN. TUBING THREAD
VALVE,SAFETY,3TORQUE: 3250 FOOT POUND. PRESSURE RATING 5000 PSI. BURST PRESSURE:
1/2",NVAM,CRA,TRSSSV
9436 PSI. API COLLAPSE PRESSURE AT AMBIENT: 7195 PSI. TENSILE WITH WORK
PRESS, WITHOUT TBG THD, AT AMBIENT, CALC/1000: 216 POUND. TENSILE
WITHOUT WORK PRESS, WITHOUT TBG THD, AT AMBIENT, CALC/1000: 296
POUND. TEMPERATURE RATING: 20:300 DEG. F. MAXIMUM FULL OPEN
PRESSURE: 1900 PSI. MINIMUM CLOSING PRESSURE: 600 PSI. PISTON
DISPLACEMENT VOLUME: 0.75 CU. INCH. EQUALIZING FEATURE: YES. MAXIMUM
PRESSURE DIFFERENTIAL AT VALVE OPENING: 5000 PSI. CONTROL LINE PRESSURE
TO EQUALIZE AT PRESSURE RATING: 4000 PSI. CONTROL LINE CONNECTION: 7/1620 HIF. COMMUNICATION TYPE: NE. LOCKOUT TYPE: NE. ISOLATION ASSEMBLY
LOCK MANDREL TYPE: 2.813 X. ISOLATION ASSEMBLY EQUALIZING VALVE TYPE:
2.813 XO. SEAT INSERT TORQUE-MIN: 2000 FOOT POUND.
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000024966
1000815456
1000845391
139
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
558
Drilling Equipment
(Downhole
Equipment)
559
Drilling Equipment
(Downhole
Equipment)
560
561
2015
Material Description
Material Long Description
COLLAR: SETTING; W/TYPE LG-12 TBR AND RPOB PROFILE F/7 IN GEN-2 LINER
COLLAR,SETTING,7",NK3SB,29#,4 HANGER; IN VERTICAL KHUFF GAS WELLS COLLAR TIE BACK; 7 IN OD,6.184 IN
MIN. I.D. ID,NK-3SB PIN DOWN END CONN,NACE MR-01-75,FOR 7 IN
1XX,TBR12FT
GENERATION-2 KHUFF LINER HANGER SYSTEMS IN VERTICAL WELLS. KITS
COMPONENTS
PACKER LINER; 'QUANTUM' NON-CEMENTED KIT TYPE,4140 L-80,FOR SCREEN
HANGING SYSTEM,6.083 IN OD,7.00 IN OD,23-26 LB/FT,4.937 - 6 IN-8 STUB ACME
PIN DOWN CONNECTN,MR0175/ISO 15156,6,000 PSI RATING ELEMENT, USED ON
7 INCH CASING, 1. COMPLETE ASSEMBLY WITH ITEMS AS DESCRIBED IN KITS
SECTION MUST BE BOXED AS AN INDIVIDUAL UNIT FOR SHIPMENT AND STORAGE
PER SAUDI ARAMCO PACKAGING SPEC 844418. 2. MANUFACTURER MUST BAR
KIT,PACKER,LINER,7X3CODE IDENTIFY EACH ISSUE UNIT ON BOTH THE MATERIAL AND OUTSIDE THE
1/2",EUE,F/SCREEN
CONTAINER IN WHICH THE ISSUE UNIT IS CONTAINED. CODE TO BE IN THE
INTERNATIONAL CODE 39 BAR CODING SYSTEM FORMAT AND ADHERE TO ANSI
MH10.8 ( LATEST EDITION) SPECIFICATION (LESS SECTIONS 12 & 13). BAR CODE
TAG MUST INCLUDE THE SAUDI ARAMCO STOCK NUMBER AND PURCHASE ORDER
NUMBER. ALL ITEMS SHOULD BE ASSEMBLED TOGETHER PRIOR TO TESTING. KITS
COMPONENTS
Material Number
9COM/9CAT
1000024083
1000807103
Drilling Equipment
(Downhole
Equipment)
SAFETY VALVE COMPONENTS: TUBING: MONEL, ASTM B165; ANNEALED; 1/4 IN.
OD; HYDROTESTED; OR NON-DESTRUCTIVE EXAMINATION (NDE) 300 FT TUBING
TUBING,HYDRAULIC,1/4",0.049", METALLIC STOCK; 1/4 IN OD,91.44 M (300 FT) LG,MONEL,ANNEALED,ASTM
MONEL,300FT
B165,CONTINUOUS LENGTH COIL ON SPOOL, HYDROTESTED OR NONDESTRUCTIVE EXAMINATION (NDE) FOR SUBSURFACE SAFETY VALVE ASSEMBLIES
1000026406
Drilling Equipment
(Downhole
Equipment)
PACKER PRODUCTION; SWELL TYPE,FOR OIL,4.5 IN OD,3.958 IN ID,12.6 PPF,NEW
VAM COONECTN,SWELLPACKER, 4.5 IN X 5.6 IN X 3 M, BASEPIPE OD: 4.5 IN,
BASEPIPE WEIGHT: 12.6 PPF, BASE MATERIAL: L80, THREAD TYPE: NEW VAM, END
RING MATERIAL: ST52, PACKER ELEMENT OD: 5.6 IN, PACKER ELEMENT LENGTH:
118.1 IN, TOTAL PACKER LENGTH: 236.2 IN, PACKER DRIFT ID: 3.833 IN, PACKER
NOMINAL ID: 3.958 IN, MINIMUM HANDLING SPACE BOX END: 50 IN, MINIMUM
HANDLING SPACE PIN END: 50 IN, COUPLING LENGTH: 9.921 IN, COUPLING OD:
4.892 IN, ENDRING LENGTH: 2.2 IN, ENDRING OD: 5.58 IN, MAX H2S LEVEL STD.
POLYMER: 0.5 %, HOLE SIZE: 6.125 IN
1000769329
PACKER,SWELL,41/2X5.60"',NVAM,12.6#,L80
Saudi Aramco: Company General Use
140
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
Material Description
Material Long Description
HANGER LINER; MECHANICAL ACTIVATI,FOR STD,5-1/2 IN X 7 IN METALSKIN
CASING STRING : OUTSIDE DIAMETER: 7.00 IN, WEIGHT ¿OPEN -HOLE LINER,
(LB/FT): SEE CHART BELOW, EXPANDABLE BASE PIPE : GRADE: ANY, CONNECTION
OUTSIDE DIAMETER: 5.500 IN, SEALABILITY : METAL TO WALL THICKNESS: 0.304
IN INSIDE DIAMETER: 4.892 IN, METAL, PREVIOUS CASING DRIFT DIAMETER:
4.767 IN, STRING OTSIDE DIAMETER: 7.00 IN, WEIGHT (LB/FT): WEIGHT : 17.0
PIPE,51/2,VETW,17#,VM50,30FT,EXPA LB/FT, GRADE: SEE CHART, GRADE: ANY VM50, SEAMLESS TUBING : YES,
CONNECTION TYPE: VAM ET WISE, CONNECTION PROTECTIVE SLEEVE: YES,
ND,SES
PROTECTIVE SLEEVE OD: 5.703 IN, CONE HOUSING RUNNING DIA (IN): 23 LB-29
LB/6.00, CONE HOUSING RUNNING DIA (IN): 32LB/5.850, WELL PARAMTERS :
MINIMUM OPEN HOLE SIZE: 7.00 IN, MAXIMUM HOLE ANGLE(DEG): ANY
INCLINATION, MAXIMUM DOGLEG SEVERITY EXPANDED SECTION: 12 DEG/100 FT,
SOUR SERVICE : WELL-SPECIFIC, CONNECTION SEALABILITY :METAL-TO-METAL,
PREVIOUS
COLLAR: SETTING, TYPE LG-12, & TBR, RP- RRP-RPOB PROFILE F/4-1/2 IN GEN-2
562
Drilling Equipment
(Downhole
Equipment)
563
Drilling Equipment
(Downhole
Equipment)
COLLAR,SETTING,41/2,NK3SB,13.5#,TBR12FT
564
Drilling Equipment
(Downhole
Equipment)
LAUNCHER,16X185/8",XPC,EX80,COMPACT,SES
565
566
567
2015
KHUFF LINER HANGER IN HORIZONTAL GAS WELLS COLLAR TIE BACK; 4-1/2 IN
OD,NK-3SB END CONN,NACE MR-01-75,FOR 4.5 IN. GENERATION-2, KHUFF LINER
HANGER SYSTEMS IN HORIZONTAL KHUFF GAS WELLS KITS COMPONENTS
LAUNCHER; COMPACT TYPE,SIZE 16 IN,16 IN X 18-5/8 IN, 115 PPF, 17 IN OD,
COMPLETE WITH CONNECTION SLEEVE, EX-80 MATERIAL, XPC PIN UP
CONNECTION
RECEPTACLE: POLISHED BORE, TO RUN WITH 4-1/2" GEN-2 'SN-AT-12' PACKER
Drilling Equipment
PBR/SEAL,4RECEPTACLE; PBR TYPE,SIZE 5.813" OD X 5.250" ID X 24',41XX-SOUR SERVICE(Downhole
1/2",NK3SB,13.5#,41XX110,24FT 110,000 PSI MIN YIELD (P-110),NACE MR-01-75-97,TO BE RUN WITH 4-1/2" "GENEquipment)
2 'SN-AT-12' PACKER KITS COMPONENTS
CENTRALIZER: CASING; 7 IN. OD; SLIP-ON, SEMI-RIGID, SPIRAGLIDER .
Drilling Equipment
(Casing Accessories & CENTRALIZER,7",SPIRAGLIDER,8. CENTRALIZER CASING; SLIP-ON, SEMI-RIGID, SPIRAGLIDER TYPE,9-5/8 IN 36-53.5
LB/FT OR 8-3/8 IN MIN ID. OPEN HOLE CASING,7 IN NON-UPSET OD,8-1/4 IN MAX
Cementing
125"OD,SC
BOW OD,STYLE 6-BLADE, SPIRAL,36-53.5 LB/FT,NRA,USE WITH STOP COLLARS
Equipment)
Drilling Equipment
(Casing Accessories &
Cementing
Equipment)
CENTRALIZER,95/8",SPIRAGLIDER,11.75"SC
CENTRALIZER: CASING; 9-5/8 IN. OD; SLIP-ON, SEMI-RIGID, SPIRAGLIDER .
CENTRALIZER CASING; SLIP-ON, SEMI-RIGID, SPIRAGLIDER TYPE,13-3/8 IN, 54.5-86
LB/FT OR 12 IN MIN ID OPEN HOLE CASING,9-5/8 IN NON-UPSET OD,11-3/4 IN
MAX BOW OD,STYLE 8-BLADE, SPIRAL,54.5-86 LB/FT,USE WITH STOP COLLARS,
8444-18
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000831473
1000024132
1000886902
1000609482
1000022719
1000022752
141
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
568
Drilling Equipment
(Casing Accessories &
Cementing
Equipment)
Material Description
Material Long Description
Material Number
9COM/9CAT
CENTRALIZER,95/8",RIGID,HINGED,12.125"
CENTRALIZER: CASING; FOR 9-5/8 IN. OD CASING TO FIT INSIDE 13-3/8 IN., 61 TO
72 LB/FT CASING; CENTRALIZER CASING; POSITIVE TYPE,13-3/8 IN CASING,9-5/8
IN OD,12.1250 IN BOW OD,STYLE NON-WELDED HINGE WITH PREFORMED RIGID
BOWS,61.0-72.0 LB/FT,TYPE "PO-V", WITHOUT HINGE PINS
1000022710
569
Drilling Equipment
(Downhole
Equipment)
PACKER,PROD,9-5/8X41/2,NVAM,12.6#,RET
570
Drilling Equipment
(Downhole
Equipment)
MILL,PATHMAKER,8.375",WINDO
W/FORMATION
571
572
2015
Drilling Equipment
(Downhole
Equipment)
Drilling Equipment
(Advanced Well
Completion
Equipment)
PACKER,PROD,7X41/2,NVAM,12.6#,ALLOY
VALVE,ICV,31/2",EUE,9.3#,CRA,ODIN
PACKER PRODUCTION; PREMIER RETRIEVABLE TYPE,FOR H2S,WIRELINE OR
HYDRAULIC SER ACTIVATI,8.540 IN OD,3.875 IN ID,9-5/8 IN OD,40-47 LB/FT,4-1/2
IN CONNECTN,12.6 LB/FT,4-1/2 IN, 12.6 PPF NEW VAM PIN X PIN
COONECTN,5,000 PSI SUPPLY,BMS A099 LOW ALLOY CARBON STEEL, 8C 18-22RC
MATERIAL, WITH HNBR PACKING ELEMENT, NITRILE O-RINGS WITH TEFLON BACKUPS, SET WORKING PRESSURE: 4000 & 7500 PSI, TEMPERATURE RATING: 100-350
DEG F. KITS COMPONENTS
MANDREL; SIZE 8.375 IN,PATHMAKER WINDOW FORMATION MILL
1000764263
1000839813
PACKER PRODUCTION; VHR SINGLE TRIP TYPE,FOR H2S,8.460 IN OD,3.880 IN ID,95/8 IN OD,40-47 LB/FT,5-1/2-6ACLH X 4-1/2 IN, 12.6 PPF NVAM CONNECTN,12.6
LB/FT (BOTTOM),BOX-PIN COONECTN,PLUGGED: 5,000 PSI ABOVE, 5,000 PSI
BELOW, UNPLUGGED WITH 4-1/2 IN TUBING :6,000 PSI ABOVE, 5,000 PSI BELOW
SUPPLY,NACE MR0175,ALLOY, 80,000 PSI YIELD STRENGTH 5.250-6 RTH LTH LH,
BURST PRESSURE: 8,430 PSI, COLLAPSE PRESSURE: 7,500 PSI, TENSILE STRENGTH:
288,000 LBS, SETTING PRESSURE: MINIMUM:2,000 PSI, MAXIMUM: 5,000 PSI,
TEST PRESSURE: 300 PSI KIT COMPONENTS
VALVE; ODIN FLOW CONTROL VALVE TYPE,SIZE 3-1/2 INCH,9.3 PPF EUE BOX X PIN
END CONN, TUNGSTEN CARBIDE TRIM,3-1/2 INCH ODIN FLOW CONTROL VALVE
9.3 PPF EUE BOX X PIN END CONN 9CR-1MO/4140,INC718, TUNGSTEN CARBIDE
TRIM, EXTERNAL WORKING PRESSURE 6500 PSI, INTERNAL DIA.:2.812 IN MIN
LENGTH: 136 IN, MAX FLOW RATE: 40000 BBL/DAY, MAX WORKING TEMP.:
325DEGF MIN WORKING TEMP.: 40DEGF, MAJOR OD: 5.850 IN, SEAL BORE SIZE:
2.812 IN, NO.#OF BYPASS CONTROL LINES:4. THE TUBING RETRIEVABLE FLOW
CONTROLLER PROVIDE REMOTELY ACTUATED DOWNHOLE CONTROL OF FLOW
FROM THE RESERVOIR. THE SYSTEM IS OPERATED BY TWO 0.25-IN HYDRAULIC
CONTROL LINE THAT IS ROUTED FROM THE SURFACE CONTROLS TO THE CHOKE
SECTION OF THE TOOL. MAX DIFFERENTIAL OPENING PRESSURE:3000 PSI AND
INTEGRAL#SHIFTING PROFILE FOR MECHANICAL OVERRIDE CONTINGENCY.
Saudi Aramco: Company General Use
1000765770
1000904428
142
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
Material Description
Material Long Description
Material Number
9COM/9CAT
573
COLLAR FLOAT; CEMENTING TYPE,STYLE SS3 VALVE, ALUM. RECEPTACLE,24 IN
Drilling Equipment
(Casing Accessories & COLLAR,FLOAT,24",JVLW,176#,IS OD,176.0 LB/FT,JV-LW BOX UP X PIN DOWN,22.2450 IN DRILL ID,API 5B,WITH SS3
VALVE AND ISC PROFILE AND 5.5 IN X 5 IN DRILL PIPE DISPLACEMENT DART, "PDC
Cementing
C
DRILLABLE"
Equipment)
1000736660
574
PACKER, PRODUCTION: RETRIEVABLE, H2S, HYDRAULIC SET, 6.000 IN OD, 3.880 IN
ID, 7.00 IN CASING OD, 26-29 LB/FT, PACKER PRODUCTION; RETRIEVABLE
TYPE,FOR H2S,HYDRAULIC SET ACTIVATI,6.000 IN OD,3.880 IN ID,7.00 IN OD,2629 LB/FT,4-1/2 IN (BOTTOM THREAD) CONNECTN,12.6 LB/FT,VAM - NEW PIN
COONECTN,6000 PSI SUPPLY,MATERIAL: ALLOY, LENGTH: 83.68 IN,
TEMPERATURE: 325 DEG F, UPPER SEAL BORE ID: 5.00 IN MIN., TYPE LATCH:
5.250-6 RTH LTH, WITH A HYDRAULIC SETTING TOOL PART NO. 12VRR38812-E
KITS COMPONENTS: ITEM 01,QTY 01, DESCRIPTION PACKER: PRODUCTION, 'VSR',
CASING SIZE:7" 26-29 LB/FT, 6.00" MAX OD, 3.88" MIN ID, 83.68" LG, 5.00" MIN
SEAL SEAL BORE ID, H2S SERVICE, ALLOY MATERIAL, 4-½"-12.6 VAM-NEW PIN
BOTTOM THREAD, 5.250-6RTH LTH LATCH TYPE, W/ AFLAS ELEMENTS WITH
BRASS BACK-UP SHOES. RATINGS: PRESSURE (UNPLUGGED): 6,0000 PSI TENSILE
STRENGTH (CALC):170,400 LBS MATERIAL NO.: 145034 ITEM 02,
QTY01,DESCRIPTION RECEPTACLE: POLISHED BORE (PBR), W/ SEAL ASSEMBLY, 7 X
5.00", 4-1/2" VAM-NEW, 15 FT, VTR, 3.85" MIN ID, 5.875" MAX OD,5.00" SEAL
BORE ID,279.5" LENGTH, PBR-ALLOY/PSA 9CR-1MO, 5-1/2-6 ACME BOX PBR TOP
THREAD, 4-1/2"-12.6 VAM-NEW BOX TOP THREAD, 4-1/2-13.5 VAM-NEW PIN
BOTTOM THREAD, SEAL MATERIAL: VTR, TEMPERTURE: 40-350 DEG F, PRESSURE
RATING: 7,500 PSI, CALCULATED TENSILE STRENGTH: 288,000 LBS, STROKE: 180"
UP. PBR RETRIEVING TOOL: NO. 212L7276 SEAL ASSEMBLY: NO. 144866 PB
RECEPTACLE: NO. 145284 MATERIAL NO. 144679 ITEM 03, QTY01,DESCRIPTION
RATCH LATCH ASSEMBLY: 5.250-6 LH TYPE, 5.29" MAX OD, 3.938" MIN ID, 5.076"
SEAL OD, 5.00" MATING SEAL BORE ID, 40.25" LG, , 4-1/2"-12.6 VAM-NEW BOX,
MATERIAL: ALLOY 80MY-22RC MAX, SEAL MATERIAL: VTR, TEMPERATURE: 40-350
DEG F, SERVICE: H2S, PRESSURE RATING: 7,500 PSI, CALCULATED TENSILE
STRENGTH: 207,400 LBS, DEBRIS SHROUD: TEFLON. MATING PACKER: NO. 812
VSR 71138-V (145034) MATERIAL NO. 144678.
1000669725
2015
Drilling Equipment
(Downhole
Equipment)
PACKER,PROD,7X41/2,VAM,12.6#,ALLOY
Saudi Aramco: Company General Use
143
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
575
Drilling Equipment
(Casing Accessories &
Cementing
Equipment)
576
577
578
579
COLLAR,STOP,41/2",SLIPON,2.00",DHP
Material Long Description
COLLAR CASING STOP; SLIP-ON, SPIR-O-LOK, 4-1/2 IN TYPE,FOR POSITIONING
CENTRALIZERS,INTERNAL DIA.: 4.625 INCH, OUTSIDE DIA.: 5.25 INCH, LENGTH: 2
INCH, NO. OF SCREWS: 8 EACH, SIZE OF SCREW: 1/2 INCH DIA., MATERIAL: CAST
DUCTILE IRON, FOR 4-1/2" X 6" SPIR-O-LIZER CENTRALIZER,
SPOOL TUBING WELLHEAD; CARBON,FOR H2S, CO2, AMINE,API RING
JOINTFLANGE TOP CONN,API RING JOINT FLANGE BTM,API RING JOINT
SPOOL ASSY: TUBING; PSL 3-4
STUDDEDOUTLET,API 6A,NACE MR0175,PSL 3 AND 4,MR EE,PR 2 (APPENDIX
F),TRU (SUITABLE FOR 300 DEG F MAX),API MONOGRAMMED
Drilling Equipment
TREE; POWER WATER INJECTION TYPE,CARBON,45-SAMSS-005,API-6A
(Wellhead Production TREE: POWER WATER INJECTION API6D,NACE MR0175
Trees)
TREE PRODUCTION; KHUFF TREE TYPE,HH,FOR H2S, CO2, AMINE,10M-15MPSI
Drilling Equipment
TREE: PRODUCTION; KHF; 10M- BODY,10M-15M PSI FLG,45-SAMSS-005,API-6A NACE MR0175,PSL 3(PSL 4 GAS
(Wellhead Production
15M
TEST),MR HH,PR 2 (APPENDIX F),TR U (SUITABLE FOR 300DEG F MAX),API 6A
Trees)
MONOGRAMMED
VALVE GATE WELLHEAD; MANUAL OPERATED,CARBON,FOR H2S,C02,AMINE,PR 2Drilling Equipment
VALVE: GATE; MANUAL; WLHD; 2- 5M PSI,API RING JOINT FLANGE ENDCONN,45-SAMSS-005,API-6A NACE
(Oil Wellhead
5M
MR0175,PSL 2,MR EE,PR 2 (APPENDIXF),TR U,API 6A MONOGRAMMED
Equipment)
Drilling Equipment
(Gas Wellhead
Equipment)
580
Drilling Equipment
(Gas Wellhead
Equipment)
581
Drilling Equipment
(Gas Wellhead
Equipment)
582
Drilling Equipment
(Gas Wellhead
Equipment)
2015
Material Description
BONNET: TUBING; KHF;
W/LMMV; 10-15M
BONNET TUBING WELLHEAD KHUFF; CARBON (WITH CLAD WETTED
SURFACES),FOR H2S, CO2, AMINE,10-15M PSI TOP,API RING JOINT FLANGE TOP
CONN,10-15M PSI BOTTOM,API RING JOINT STUDDED BTM,45-SAMSS-005,API-6A
NACE MR0175,PSL 4,MR HH,PR 2 (APPENDIX F),TR U (SUITABLE FOR 300 DEG F
MAX), HAS BUILT IN SPLIT GATE LMMV API 6A MONOGRAMMED
BONNET TUBING WELLHEAD KHUFF; FOR H2S, CO2, AMINE,10-15M PSI TOP,API
RING JOINT STUDDED TOP CONN,10-15M PSI BOTTOM,API RING JOINT STUDDED
BONNET: TUBING; KHF; 10-15M BTM,API-6A,NACE MR0175 45-SAMSS-005,PSL 4,PR 2 (APPENDIX F),TR U
(SUITABLE FOR 300 DEG F MAX), BONNET ONLY, NO BUILT IN LMMV API
MONOGRAMMED
SPOOL CASING; CARBON,FOR H2S, CO2, AMINE,API RING JOINT FLANGE TOP
CONN,API RING JOINT FLANGE BTM,API RING JOINT STUDDED OUTLET,45-SAMSSSPOOL ASSY: CASING
005,API-6A NACE MR0175,PSL 2,MR DD,PR 2 (APPENDIX F),TR U,API 6A
MONOGRAMMED
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
1000803585
6000003757
6000003781
6000003773
6000003785
6000003641
6000003637
6000003749
144
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
Material Description
583
Drilling Equipment
(Gas Wellhead
Equipment)
FLANGE: DSPO & ADPT; 10M15M
584
Drilling Equipment
(Oil Wellhead
Equipment)
COMPLETION ASSY: TUBING;
WLHD; 2-5M
585
Drilling Equipment
(Oil Wellhead
Equipment)
SPOOL ASSY: TUBING; 2-5M
586
Drilling Equipment
(Oil Wellhead
Equipment)
FLANGE: DSPO & ADPT; 2-5M
587
588
589
Drilling Equipment
(Gas Wellhead
Equipment)
Drilling Equipment
(Gas Wellhead
Equipment)
Drilling Equipment
(Gas Wellhead
Equipment)
Material Long Description
HANGER; ASSY: TUBING; 10M15M
SPOOL ASSY: CASING HEAD
VALVE: GATE; HYD; SSV; WHLD;
10M-15M
590
Drilling Equipment
TREE: PRODUCTION; OFFSHORE;
(Wellhead Production
2-5M
Trees)
591
Drilling Equipment
VALVE: GATE; MAN; WLHD; 10M(Wellhead Equipment
15M
Spares)
592
2015
Drilling Equipment
(Gas Wellhead
Equipment)
VALVE: BACKPRESSURE; & TWCV;
WLHD
PACK-OFF DOUBLE STUDDED; CARBON,FOR H2S, CO2, AMINE,10M-15M PSI
TOP,API RING JOINT STUDDED TOP CONN,10M-15M PSI BTM,API RING JOINT
STUDDED BTM,API 6A,NACE MR-01-75,PSL 3 - 4,MR DD,PR 2 (APPENDIX F),TR U
(SUITABLE FOR 300 DEG F MAX),API MONOGRAMMED
COMPLETION ASSEMBLY TUBING; WELLHEAD, OIL TYPE,PR API 2 - 5MPSI,FOR
H2S, CO2 AND AMINE,PSL 2,MR DD,PR 2 (APPENDIX F),TRU,API-6A,NACE MR0175
45-SAMSS-005,TO BE API MONOGRAMMED
SPOOL TUBING WELLHEAD; CARBON,FOR H2S, CO2, AMINE,2-5M PSITOP,API
RING JOINT FLANGE TOP CONN,2-5M PSI BOTTOM,API RINGJOINT FLANGE
BTM,45-SAMSS-005,API-6A NACE MR0175,PSL 2,MR DD,PR2 (APPENDIX F),TR
U,API 6A MONOGRAMMED
PACK-OFF DOUBLE STUDDED; CARBON,FOR H2S, C02, AMINE,2-5M PSITOP,API
RING JOINT STUDDED TOP CONN,2-5M PSI BTM,API RING JOINTSTUDDED BTM,45SAMSS-005,API-6A NACE MR0175,PSL 2,MR DD,PR 2(APPENDIX F),TR U,API 6A
MONOGRAMMED
HANGER TUBING WELLHEAD; UNS 7718,FOR H2S, CO2, AMINE,PR 10M-15M
PSI,API-6A,NACE MR0175 45-SAMSS-005,PSL 4,MR HH,PR 2 (APPENDIX F),TR U
(SUITABLE FOR 300 DEG F MAX),API MONOGRAMMED
SPOOL CASING HEAD; CARBON,FOR H2S, CO2, AMINE,API RING JOINTFLANGE
TOP CONN,45-SAMSS-005,API-6A NACE MR0175,PSL 2,MR DD,PR 2(APPENDIX
F),TR U,API 6A MONOGRAMMED
VALVE GATE WELLHEAD; HYD ACTUATED FAIL-SAFE OPERATED,FOR H2S, CO2,
AMINE,PR 10M-15M PSI,API RING JOINT FLANGE END CONN,API 6A,NACE MR-0175,PSL 3 (PSL 4 GAS TEST),MR HH,PR 2 9APPENDIX F),TR U (SUITABLE FOR 300
DEG F MAX),API MONOGRAMMED
TREE PRODUCTION; OFFSHORE TREE TYPE,CARBON,FOR H2S, CO2, AMINE,2-5M
PSI BODY,2-5M PSI FLG,API RING JOINT FLG,API-6A,NACE MR0175 45-SAMSS005,PSL 2,MR EE,PR 2 (APPENDIX F),TR U,API MONOGRAMMED
VALVE GATE WELLHEAD; MANUAL OPERATED,FOR H2S, CO2, AMINE,PR 10M15M PSI,API RING JOINT FLANGE END CONN,API 6A,NACE MR-01-75,PSL 3 (PSL 4
GAS TEST),MR HH,PR 2 (APPENDIX F),TR U (SUITABLE FOR 300 DEG F MAX),API
MONOGRAMMED
VALVE BACKPRESSURE WELLHEAD; FOR HS2, CO2, AMINE,UNS 7718BODY,45SAMSS-005,NACE MR0175
Saudi Aramco: Company General Use
Material Number
9COM/9CAT
6000003689
6000003659
6000003755
6000003687
6000003709
6000003745
6000003799
6000003775
6000003787
6000003789
145
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
593
594
595
Category
Material Description
Material Long Description
TREE PRODUCTION; ONSHORE TREE TYPE,CARBON,FOR H2S,CO2,AMINE,2-5M PSI
Drilling Equipment
TREE: PRODUCTION; ONSHORE; 2- BODY,2-5M PSI FLG,API RING JOINTFLG,45-SAMSS-005,API-6A NACE MR0175,PSL
(Wellhead Production
5M
2,MR EE,PR 2 (APPENDIXF),TR U,API 6A MONOGRAMMED
Trees)
Drilling Equipment
(Oil Wellhead
Equipment)
Drilling Equipment
(Gas Wellhead
Equipment)
HANGER TUBING WELLHEAD NON-KHUFF; CARBON,FOR H2S, CO2, AMINE,PR25M PSI,API-6A,NACE MR0175,PSL 2,MR DD,PR 2 (APPENDIX F),TRU,API
MONOGRAMMED
UNIT; SUB-SEA WELLHEAD SYSTEM, 2M-15M TYPE,API SPECIFICATION 17 D,PSL 2,
SUB-SEA WELLHEAD SYSTEM, 2M3, 3G AND 4
15M
HANGER ASSY: TUBING; 2-5M
596
PUMP CENTRIFUGAL; VERTICAL - LINESHAFT TYPE,SIZE 8 IN X 3 IN X 1-11/16
IN,1000 GPM AT 600 FT TDH, 1780 RPM,11 STAGE(S),DIESEL ENGINE
DRIVER,CASING, IMPELLERS AND SHAFT WET PART,STEEL CASING,17-4PH SS
Drilling Equipment PUMP, CENTRIFUGAL, VERTICAL - SHAFT,BRONZE IMPELLER,VIL, ENCLOSED LINESHAFT MTG,14 IN SHAFT STICK UP,
DYNAMICALLY-BALANCED IMPELLER, BOWL SHAFT DIA.: 1.6875 IN, BOWL
(Drilling Items, Other)
LINESHAFT
MATERIAL: CAST IRON W GLASS ENAMEL STD., SUCTION BELL BEARING: BRONZE,
BOWL BEARING MATERIAL: BRONZE, STRAINER MATERIAL: GALVANIZED STEEL
(CONE), SERVICE: NON-TOXIC WATER, 70 DEG F, SP. GR.: 1.0
597
Drilling Equipment
(Drilling Items, Other)
598
Drilling Equipment
HOOK: BLOCK OR COMBINATION
(Drilling Items, Other)
599
Drilling Equipment
(Drilling Items, Other)
600
Drilling Equipment
RIG AND/OR DERRICK: DRILLING
(Drilling Items, Other)
601
Drilling Equipment
(Drilling Items, Other)
602
Drilling Equipment
(Drilling Items, Other)
2015
COUPLING: TUBE, 3 IN, STEEL,
COUPLING; TUBE TYPE,SIZE 3 IN,STEEL,SEAMLESS,WITH OIL IMPREGNATED
REDWOOD INNER LINING, FOR WESTERN TYPE C LEFT HAND THD WATERWELL
TUBES, MARLEY CO LAYNE & BOWLER INC DWG #1727 A
HOOK; HOOK OR BLOCK OR HOOK/ BLOCK COMBINATION, API COMPLIANT
Material Number
9COM/9CAT
6000003777
6000003707
6000014703
1000751965
1000240014
6000004095
BLOCK; CROWN TYPE,API COMPLIANT
BLOCK: CROWN
6000004101
DERRICK; DRILLING TYPE,DRILLING,API COMPLIANT
6000004103
PANEL CONTROL; DRILLING CONTROL PANEL AND COMPONENTS TYPE,AB. AND
PANEL: CONTROL; DRILLING; &
COMPONENTS,API COMPLIANT
COMPONENTS
DRAWWORKS: DRLG RIG; &
ASSOC EQUIP
CATHEAD DRAWWORKS; AIR CONTROL TYPE,AIR CONTROL,AUTOMATIC, API
COMPLIANT
Saudi Aramco: Company General Use
6000004109
6000004111
146
Material Sourcing List
Region 4: Japan, Australia, New Zealand
Item
Category
Material Description
603
Drilling Equipment
(Drilling Items, Other)
BOARD: MONKEY; DRLG RIG
604
Drilling Equipment
(Drilling Items, Other)
PUMP: MUD; DRILLING
605
Drilling Equipment
(Drilling Items, Other)
TABLE: ROTARY; DRLG
606
Drilling Equipment
(Drilling Items, Other)
SWIVEL: ROTARY; DRLG
607
608
609
2015
Material Long Description
BOARD; MONKEY TYPE,MONKEY,MONKEY BOARD
6000004151
PUMP; MUD TYPE,DRILLING, API COMPLIANT
6000004153
TABLE; ROTARY TYPE,API COMPLIANT, RIG FLOOR ROTARY TABLE
6000004175
SWIVEL; ROTATING EQUIPMENT TYPE,ROTATING EQUIPMENT,API COMPLIANT
6000004193
UNIT; SKID MOUNTED TYPE,PULSE VARIABLE SPEED DRIVE, SUPPLIED WITH
Drilling Equipment
GENERATOR SET, MOTOR CONTROLLER, JUNCTION BOXES, CABLE, CIRCUIT
UNIT: TESTING, SKID MOUNTED
(Drilling Items, Other)
BREAKERS AND OTHER EQUIPMENT & ACCESSORIES, USED FOR TESTING
SUBMERSIBLE PUMP MPTORS
SPARE PART 9COM; OILWELL DIV, UNITED STATES STEEL,BLOCK TRAVELLING
Drilling Equipment
SPARES: OILWELL; TRAVELING
TABLE ROTARY
(Drilling Items, Other)
BLOCK
Drilling Equipment
(Drilling Items, Other)
Material Number
9COM/9CAT
VALVE; MUD; GATE OR PLUG;
DRLG
6000013381
6000004539
VALVE GATE MUD; API COMPLIANT,API COMPLIANT
Saudi Aramco: Company General Use
6000004157
147