Distributed by: BEST MATERIALS LLC
Ph: 800-474-7570, 602-272-8128 Fax: 602-272-8014
Email: sales@bestmaterials.com www.bestmaterials.com
Water
Repellents
Solutions for
Moisture Intrusion
Concrete and masonry surfaces always require protection from the damages of wind-driven
rain, freeze-thaw, moisture, and chloride ion intrusion from de-icing salts... it's just a matter
of time. High performance water repellents penetrate the substrate without creating a film on
the surface. They maintain the original appearance of the substrate and allow moisture vapor
to escape, while sealing and protecting concrete and masonry for years to come.
Water Repellents
Vertical Substrate Applications
Applications
Commercial, Residential and
Institutional Buildings
• Brick Facades
• Concrete Blocks
• Lightweight Blocks
• Architectural Concrete
• Exposed Aggregate
• Conventional Stucco
• Natural Stone
• Concrete Pavers
Infrastructures and
Transportation
• Bridge Decks
• Parking Decks
• Highways
• Stadiums
• Plazas
Technologies
• Silane
• Silane/Siloxane Blend
• Water-based
• Solvent-based
ENVIROSEAL® Double 7 for Brick
Water repellent for brick and other vertical masonry
surfaces
A patented, water-based, high-performance, clear,
penetrating water repellent sealer developed for dense,
vertical surfaces such as hard burnt brick, stucco and
natural stone.
ADVANTAGES & TYPICAL USES
• Water-based
• Interior or exterior use
• Used on masonry/brick & stucco
• Breathable
• Easy to apply
• Environmentally responsible
• Excellent water bead
ENVIROSEAL® PBT
Water repellent for light and medium weight blocks,
and split faced CMU
A patented, high-performance, water-based water repellent
specifically formulated to provide long-term protection for
the most challenging split faced light and medium weight
CMU/block.
ADVANTAGES & TYPICAL USES
• Water-based
• Highest degree of water repellency
for lightweight block/CMU
• Breathable
• Easy to apply
• Environmentally responsible
• Prevents moisture intrusion
• Excellent water bead
• Superior porous block treatment
ENVIROSEAL® 20
20% silane for concrete, masonry and other surfaces
A patented, water-based, clear, penetrating silane sealer for
use on a multitude of surfaces including concrete, brick,
stucco and precast concrete.
ADVANTAGES & TYPICAL USES
• Water-based
• Horizontal or vertical use
• Used on exposed aggregate
• USDA certified (non-food contact areas)
• Interior or exterior use
• Easy to apply
• Environmentally responsible
ENVIROSEAL® 7
Cost effective silane/siloxane sealer
A patented, water-based, cost effective, clear penetrating
silane/siloxane sealer developed for use on a multitude of
vertical surfaces including poured-in-place concrete, brick,
stucco and precast concrete.
HYDROZO® Clear Double 7 VOC
Penetrating water repellent sealer for porous
vertical substrates
A solvent-based, VOC-compliant, high-performance
sealer especially suited for use on porous substrates,
such as concrete block.
ADVANTAGES & TYPICAL USES
• Excellent for cool weather applications
• Breathable
• Does not alter appearance of substrates
• For use on new and existing surfaces
• Reduces freeze-thaw damage
• Does not harm adjacent metal or painted surfaces
HYDROZO® CLEAR 40 VOC
Penetrating water repellent for
vertical concrete and masonry surfaces
A solvent-based, VOC-compliant, penetrating water
repellent designed to protect new and existing vertical
concrete and masonry surfaces that are exposed to
weathering elements and chloride ions.
ADVANTAGES & TYPICAL USES
• No cleaning necessary for ordinary
windows or glass
• Does not harm adjacent metal,
wood or painted surfaces
• Excellent for cool weather applications
• Prevents moisture intrusion damage
• Prevents freeze-thaw damage
• Breathable
• Greater than 40% active ingredients
HYDROZO® 100
Clear, penetrating water repellent for
new and existing concrete surfaces
A 100% silane sealer that penetrates and chemically
reacts deep within the pores of concrete to form longlasting protection to substrates subject to high traffic
abrasion such as bridge decks, highway surfaces and
parking garages. It will not harm adjacent metal, glass,
wood or painted surfaces - which do not require
cleaning after application. This is advantageous for
concrete or masonry buildings because these surfaces
need not be masked prior to application.
ADVANTAGES & TYPICAL USES
• Highest degree of water repellency
• Excellent chloride ion protection
• Freeze-thaw protection
• Forms a chemical bond deep within the surface
• Protects new and existing concrete
ADVANTAGES & TYPICAL USES
• Water-based
• Cost effective
• Interior or exterior use
• Breathable
• Easy to apply
• Environmentally responsible
For project quotes or more information about any of these items,
email sales@bestmaterials.com
Horizontal Substrate Applications
ENVIROSEAL® 20
20% silane for concrete, masonry
and other surfaces
A patented, water-based, clear, penetrating silane sealer for
use on a multitude of surfaces including concrete, brick,
poured-in-place and precast concrete.
ADVANTAGES & TYPICAL USES
• Horizontal or vertical use
• Water-based
• USDA certified (non-food contact areas)
• Interior or exterior use
• Easy to apply
• Environmentally responsible
• Breathable
ENVIROSEAL® 40
40% silane for concrete, masonry
& other surfaces
A patented high-performance, water-based, clear,
penetrating silane sealer designed to protect concrete and
masonry surfaces that are exposed to weathering and
chloride ions.
ADVANTAGES & TYPICAL USES
• Water based
• Ideal for traffic-bearing surfaces
• Superior protection against water penetration
• Interior or exterior use
• Easy to apply
• Environmentally responsible
• Breathable
HYDROZO® SILANE 40 VOC
Water repellent for horizontal precast,
prestressed and poured-in-place concrete
Solvent-based, VOC-compliant, silane sealer that
penetrates deep and chemically reacts with concrete to
form a long-lasting water-repellent surface. Ideal for use on
horizontal surfaces subject to traffic abrasion.
ADVANTAGES & TYPICAL USES
• Ideal for traffic-bearing surfaces
• Prevents chloride ion intrusion
• Superior protection against water penetration
• Freeze-thaw protection
• Breathable
• Greater than 40% active ingredients
• Excellent for cool weather applications
HYDROZO® 100 PLUS
Clear penetrating breathable
water and oil repellent
Designed to protect new and existing concrete surfaces
that are exposed to weathering and chloride ions. An
oliophobic additive helps prevent stains caused by motor
oils, greases and food products.
ADVANTAGES & TYPICAL USES
• Resistant to oil, grease and food stains
• Easy to apply
• Breathable
• Excellent chloride ion protection
• Forms a chemical bond deep within the surface
For project quotes or more information about any of these items,
email sales@bestmaterials.com
HYDROZO® 100
Clear, penetrating water repellent for
new and existing concrete surfaces
A 100% silane sealer that penetrates and chemically reacts
deep within the pores of concrete to form long-lasting
protection to substrates subject to high traffic abrasion
such as bridge decks, highway surfaces and parking
garages. It will not harm adjacent metal, glass, wood or
painted surfaces - which do not require cleaning after
application. This is advantageous for concrete or masonry
buildings because these surfaces need not be masked
prior to application.
ADVANTAGES & TYPICAL USES
• Highest degree of water repellency
• Excellent chloride ion protection
• Freeze-thaw protection
• Forms a chemical bond deep within the surface
• Protects new and existing concrete
Building Systems is an industry leader
in the manufacture of construction
chemicals and building products for
the construction industry.
Its widely recognized brands – Sonneborn®,
Thoro®, MBT Protection and Repair,
Hydrozo®, SELBY®, UCRETE®, and SRS
DEGADUR® provide an expansive product
offering that includes joint sealants, grouts,
waterproofing membranes, concrete repair
products, clear sealers, performance
flooring, and wall coatings.
Building Systems has a truly unique ability
to bundle its products into comprehensive
“building systems” that offer designers and
contractors effective single-source solutions to
their building and construction problems. Our
sales force, technical services, and research &
development groups, work together to ensure
we meet your project needs.
For every building challenge there's a
Building Systems solution... everything
you need to build, repair and protect.
Distributed by: BEST MATERIALS LLC
Ph: 800-474-7570, 602-272-8128 Fax: 602-272-8014
Email: sales@bestmaterials.com www.bestmaterials.com
BASF Corportation
Building Systems
889 Valley Park Drive
Shakopee, MN 55379
www.BuildingSystems.BASF.com
Customer Service 800-433-9517
Technical Service 800-243-6739
LIMITED WARRANTY NOTICE Every reasonable effort is made to apply BASF exacting standards both in the manufacture of our products and in the information which we issue concerning these products and
their use. We warrant our products to be of good quality and will replace or, at our election, refund the purchase price of any products proved defective. Satisfactory results depend not only upon quality products,
but also upon many factors beyond our control. Therefore, except for such replacement or refund, BASF MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF FITNESS
FOR A PARTICULAR PURPOSE OR MERCHANTABILITY, RESPECTING ITS PRODUCTS, and BASF shall have no other liability with respect thereto. Any claim regarding product defect must be received in writing
within one (1) year from the date of shipment. No claim will be considered without such written notice or after the specified time interval. User shall determine the suitability of the products for the intended use
and assume all risks and liability in connection therewith. Any authorized change in the printed recommendations concerning the use of our products must bear the signature of the BASF Technical Manager.
This information and all further technical advice are based on BASF’s present knowledge and experience. However, BASF assumes no liability for providing such information and advice including the extent to
which such information and advice may relate to existing third party intellectual property rights, especially patent rights. In particular, BASF disclaims all WARRANTIES, WHETHER EXPRESS OR IMPLIED,
INCLUDING THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. BASF SHALL NOT BE RESPONSIBLE FOR CONSEQUENTIAL, INDIRECT OR INCIDENTAL DAMAGES
(INCLUDING LOSS OF PROFITS) OF ANY KIND. BASF reserves the right to make any changes according to technological progress or further developments. It is the customer’s responsibility and obligation to
carefully inspect and test any incoming goods. Performance of the product(s) described herein should be verified by testing and carried out only by qualified experts. It is the sole responsibility of the customer to
carry out and arrange for any such testing. Reference to trade names used by other companies is neither a recommendation, nor an endorsement of any product and does not imply that similar products could
not be used.
For professional use only. Not for sale to or use by the general public.
Form No. 1024906
© 2010 BASF 5/10 Printed in U.S.A.