Piranha HS HS-4x-02K30 High Sensitivity Line Scan Cameras Overview High Sensitivity. High Speed. Low Noise. Key Features Line rate up to 52 kHz High responsivity up to 1610 DN/(nJ/cm²) Selectable Base or Medium Camera Link™ Enhanced blue response 100% fill factor >100x Antiblooming Programmability Programmable pixel to pixel correction User selectable number of TDI stages -10 dB to +10 dB selectable gain 8 or 10 bit output Analog and digital gain and offset control Adjustable integration time and line rate Typical Applications Postal sorting (letters) High performance document scanning and image lift Industrial inspection Low light scanning W W W. S T E M M E R- I M A G I N G . C O M With line rates exceeding 52 kHz and a resolution of 2048 pixels, DALSA's latest high sensitivity camera specifically meets the performance requirements needed in demanding applications such as postal sorting, document scanning, and low light industrial inspection. The fast line rates are achieved via the sensors 4 outputs, each operating at 30 MHz, for a total throughput of 120 MHz. The high level of sensitivity—up to 1610 DN/(nJ/cm²)— is accomplished using TDI technology with up to 64 stages of exposure, while the camera's antiblooming prevents localized overexposure from contaminating the information in adjacent pixels. The unique features of the Piranha HS 2k will help you set your system apart from the competition. Specifications Resolution Data Rate Max. Line/Frame Rate Pixel Size Data Format Output Lens Mount Responsivity Dynamic Range Nominal Gain Range Size Mass Operating Temp Power Supply Power Dissipation Regulatory Compliance Control Data Power Example Part Number 2048 x 64 TDI 2 x 60 / 4 x 30 MHz 52 kHz 13 m 8, 10 bit Base, Med Camera Link M42 x 1, F mount Up to 1610 DN/(nJ/cm²) 54 dB ±10 dB 85 mm x 85 mm x 53.4 mm <500 g 0 °C to 50 °C 12 V to 15 V <10 W CE MDR26 Camera Link Shared with Control Hirose HR10 6 pin HS-41-02K30 93 Piranha HS HS-4x-02K30 High Sensitivity Line Scan Cameras This High Sensitivity Line Scan camera uses TDI technology to combine multiple exposures, dramatically increasing sensitivity and decreasing F-Mount K-TEDA16-06/2011 ∙ Subject to technical change without notice. No liability is accepted for errors which may be contained in this document. lighting requirements. 46.50 ±0.18 6.56 ±0.18 OPTICAL DISTANCE 6.70 0.175 CCD IMAGING CENTER DISTANCE (FROM DATUM C TO INTERFACE SURFACE) A 70.0 (2X) 7.5 (2X) 0.6 6.0 (4X) 53.4 A 49.7 M3x0.5 - 6H x 5.0 DEEP TRIPOD ADAPTER MOUNTING HOLES (4X) IMAGE PLANE // TO A < 100 ٛm 53.1 A 93.1 42.5(4X) 39.0(4X) Y IMAGE CENTER 85.0 41.6 (2X) TDI INDICATOR ø56.2 F-MOUNT ADAPTER C X 32.5 29.0 (4X) (4X) 54.9 65.0 85.0 32.1 PIXEL 1 M3x0.5 - 6H x 7.0 DEEP (4X) B DIRECTION OF MOTION WITH INVERTING LENS 26.6 x 0.3 IMAGE AREA 9.9 10.5 10.5 24.9 74.5 F-MOUNT ADAPTER THREAD IS M42 x 1 X, Y TOLERANCES ON IMAGE 1. UNITS: MM 2. TOLERANCES 0.3 ON ALL DIMENSIONS UNLESS OTHERWISE SPECIFIED. CENTER LOCATION WITH RESPECT TO: 1. F-MOUNT ADAPTER ±0.18 MM 2. FOUR M3 x 0.5 HOLES ±0.18 MM 3 DATUM SURFACES B & C ±0.18 MM IMAGE ROTATION WITH RESPECT TO SURFACE B IS 0.6° W W W. S T E M M E R- I M A G I N G . C O M . I M A G I N G I S O U R PA S S I O N GERMANY AU ST R I A Phone: +49 89 80902-0 info@stemmer-imaging.de UNITED KINGDOM FRANCE SW I T Z E R L A N D THE NETHERLANDS Sales, 605 McMurray Rd, Waterloo, Ontario, 2E9 Tel:B E1.519.886.6000 IWorldwide RELAND L I E C HCanada T E N ST E I N2V N LG I U M . L U X E M B Osales.americas@dalsa.com URG Phone: +44 1252 780000 Phone: +33 1 45069560 Phone: +41 55 415 90 90 Phone: +31 575 798888 European Sales, Breslauer Str. 34, D-82194 Gröbenzell (Munich), Germany Tel: 49.8142.46770 sales.europe@dalsa.com info@stemmer-imaging.co.uk info@stemmer-imaging.fr info@stemmer-imaging.ch info@stemmer-imaging.nl Asia Pacific Sales, Ikebukuro East 13F, 3-4-3 Higashi-Ikebukuro, Toshimo-ku, Tokyo, 170-0013, Japan Tel: 81.3.5960.6353 sales.asia@dalsa.com 20-Mar-08 03-70-00160-09 www.dalsa.com