CERTIFICATE OF COMPLIANCE
Certificate Number
Report Reference
Issue Date
Issued to:
20130716-E314047
E314047-20070615
2013-JULY-16
COOPER CAPRI SAS
36 RUE DES FONTENILS
41600 NOUAN LE FUZELIER FRANCE
This is to certify that
representative samples of
MARINE SHIPBOARD CABLE FITTINGS FOR USE IN
ZONE CLASSIFIED HAZARDOUS LOCATIONS
See Addendum Page
Have been investigated by UL in accordance with the
Standard(s) indicated on this Certificate.
Standard(s) for Safety:
UL 2225, Standard For Cables And Cable-Fittings For Use
In Hazardous (Classified) Locations.
Additional Information:
See the UL Online Certifications Directory at
www.ul.com/database for additional information
Only those products bearing the UL Listing Mark for the US and Canada should be considered as
being covered by UL's Listing and Follow-Up Service meeting the appropriate requirements for US
and Canada.
The UL Listing Mark for the US and Canada generally includes: the UL in a circle symbol with “C” and
“US” identifiers:
the word “LISTED”; a control number (may be alphanumeric) assigned by UL;
and the product category name (product identifier) as indicated in the appropriate UL Directory.
Look for the UL Listing Mark on the product.
William R. Carney, Director, North American Certification Programs
UL LLC
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please
contact a local UL Customer Service Representative at www.ul.com/contactus
Page 1 of 3
CERTIFICATE OF COMPLIANCE
Certificate Number
Report Reference
Issue Date
20130716-E314047
E314047-20070615
2013-JULY-16
This is to certify that representative samples of the product as specified on this certificate were tested
according to the current UL requirements.
Products Covered:
USL:
Series ADE followed by -1F, -1F2 or -1F2-Anchorage, followed by No. 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13,
14, 15, 16 or 17. For use in Class I, Zone 2, AEx e II Hazardous Areas. For use with unarmored
marine shipboard cable. Thread sizes 1/2 to 4 in. NPT inclusive or M20 to M110 inclusive.
Series ADE followed by -4F, followed by No. 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16 or 17. For use in
Class I, Zone 1, AEx e II Hazardous Areas. For use with armored or braided marine shipboard cable
employing, aluminum, bronze, copper or stainless steel grounding braid. Thread sizes 1/2 to 4 in. NPT
inclusive or M20 to M110 inclusive.
Series ADE followed by -6F, followed by No. 5, 6, 7, 8, 9, 10 or 11. For use in Class I, Zone 1, AEx e II
Hazardous Areas. For use with armored or braided marine shipboard cable employing, aluminum,
bronze, copper or stainless steel grounding braid. Thread sizes 1/2 to 2 in. NPT inclusive or M20 to
M63 inclusive.
These fittings are intended for installation on mobile offshore oil rigs and drilling platforms in
accordance with Subpart 111.60 of the United States Coast Guard Electrical Engineering Regulations,
Subchapter J (Title 46 of Federal Regulations, Parts 110 to 113 inclusive) as applied by the Authority
Having Jurisdiction.
William R. Carney, Director, North American Certification Programs
UL LLC
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please
contact a local UL Customer Service Representative at www.ul.com/contactus
Page 2 of 3
CERTIFICATE OF COMPLIANCE
Certificate Number
Report Reference
Issue Date
20130716-E314047
E314047-20070615
2013-JULY-16
Products Covered (Cont.):
CNL
Series ADE followed by -1F, -1F2 or -1F2-Anchorage, followed by No. 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13,
14, 15, 16 or 17. For use in Class I, Zone 2, Ex e II Hazardous Areas. For use with unarmored marine
shipboard cable. Thread sizes 1/2 to 4 in. NPT inclusive or M20 to M110 inclusive.
Series ADE followed by -4F, followed by No. 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16 or 17. For use in
Class I, Zone 1, Ex e II Hazardous Areas. For use with armored or braided marine shipboard cable
employing, aluminum, bronze, copper or stainless steel grounding braid. Thread sizes 1/2 to 4 in. NPT
inclusive or M20 to M110 inclusive.
Series ADE followed by -6F, followed by No. 5, 6, 7, 8, 9, 10 or 11. For use in Class I, Zone 1, Ex e II
Hazardous Areas. For use with armored or braided marine shipboard cable employing, aluminum,
bronze, copper or stainless steel grounding braid. Thread sizes 1/2 to 2 in. NPT inclusive or M20 to
M63 inclusive.
These fittings are intended for installation on mobile offshore oil rigs and drilling platforms in
accordance with Ships Electrical Standards, TP 127E, Section 26, Subsections 8 and 9 as applied by
the Authority Having Jurisdiction.
William R. Carney, Director, North American Certification Programs
UL LLC
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please
contact a local UL Customer Service Representative at www.ul.com/contactus
Page 3 of 3