Department of Materials Forming
and Processing
Department of Mechanical Technology
and Materials
Department of Computer Modelling
and Metal Forming Technologies
International scientific conference
PROGRESSIVE TECHNOLOGIES AND
MATERIALS IN MECHANICAL
ENGINEERING
Department of Materials Forming
and Processing
Rzeszow University of Technology
Department of Mechanical Technology
and Materials
TOPICS OF THE CONFERENCE
n
n
n
Technical University of Koš ice
n
n
n
n
Call for Papers
PRO-TECH-MA 2016
Department of Computer Modelling
and Metal Forming Technologies
n
n
Progressive materials for engineering production,
their properties, evaluation methods of
technological workability;
New observations from theory of technological
processes of metal forming, welding, surface
treatment, machining and plastic processing;
Tribological aspects of technological processes;
Progressive mechanical engineering technologies;
Experimental, computational and simulation
methods in mechanical engineering technologies;
Tools and fixtures in engineering production;
Products and production designing;
Ecological aspects of mechanical engineering
technologies;
Automotive production.
Lublin University of Technology
and
Special Sub-Conference Sections
MICROMECHANICS OF MATERIALS
POLAND
22th June - 24th June 2016, Bezmiechowa, POLAND
SPECIAL SUB-CONFERENCE SECTIONS
n
Micromechanics of materials.
ORGANIZING COMMITTEE
SCIENTIFIC COMMITTEE OF THE CONFERENCE
Jacek Mucha – Committee co-chair
Grażyna Ryzińska - Secretary
Ľuboš Kaščák
Grzegorz Samołyk
Irena Nowotyńska
Waldemar Witkowski
Feliks STACHOWICZ – general chair
Zbigniew PATER - co-chair
Emil SPIŠÁK - co-chair
Marek BALAZINSKI
Róbert BIDULSKÝ
Gabriel BOROWSKI
Rzeszow University of Technlogy, Poland
Lublin University of Technology, Poland
TU Košice, Slovak Republic
Polytechnique Montréal, Canada
TU Košice, Slovak Republic
Lublin University of Technology, Poland
Sergei BOSIAKOV
Belarusian State University, Belarus
Janette BREZINOVÁ
Grzegorz BUDZIK
Leszek DEMKOWICZ
Victor EREMEEV
Emil EVIN
Milan FOREJT
TU Košice, Slovak Republic
Rzeszow University of Technlogy, Poland
University of Texas at Austin, USA
Rzeszow University of Technlogy, Poland
TU Košice, Slovak Republic
VUT Brno, Czech Republic
Andrzej GONTARZ
Lublin University of Technology, Poland
Viliam HRNČIAR
STU Bratislava, Slovak Republic
Waldemar KARWOWSKI
University of Central Florida, USA
Tibor KVAČKAJ
TU Košice, Slovak Republic
Valery KHARCHENKO
Ľuboš KAŠČÁK
Volodymyr KUSHCH
Stanisław KUT
Ildikó MAŇKOVÁ
Gennady MISHURIS
Jacek MUCHA
Yuri V. PETROV
Jozef PETERKA
Pero RAOS
Andrzej SEWERYN
Igor SEVOSTIANOV
Jarosław SĘP
National Academy of Sciences of Ukraine, Ukraine
TU Košice, Slovak Republic
Institute for Superhard Materials, Kiev, Ukraine
Rzeszow University of Technlogy, Poland
TU Košice, Slovak Republic
Aberystwyth University, UK
Rzeszow University of Technlogy, Poland
Australian Nuclear Science and Technology
Organisation, Australia
Saint Petersburg State University, Russia
MTF Trnava, Slovak Republic
Josip Juraj Strossmayer University of Osijek, Croatia
Bialystok University of Technology, Poland
New Mexico State University, USA
Rzeszow University of Technlogy, Poland
Ján SLOTA
TU Košice, Slovak Republic
Peter ŠUGÁR
MTF Trnava, Slovak Republic
Pavol ŠVEC
STU Bratislava, Slovak Republic
Tomasz TRZEPIECIŃSKI
Rzeszow University of Technlogy, Poland
Lucjan WITEK
Rzeszow University of Technlogy, Poland
Anna PARADOWSKA
CHAIR
Feliks STACHOWICZ
stafel@prz.edu.pl
Rzeszow University of Technlogy, Poland
Rzeszow University of Technlogy, Poland
TU Košice, Slovak Republic
Lublin University of Technology, Poland
Rzeszow University of Technlogy, Poland
Rzeszow University of Technlogy, Poland
CONTACT ADDRESS
Department od Materials Forming and Processing
The Faculty of Mechanical Engineering and Aeronautics
Rzeszow University of Technology
al. Powstańców Warszawy 8
35-959 Rzeszów
Poland
e-mail: protechma2016@prz.edu.pl
REGISTRATION FEE
250 EUR conference participation and paper in the English language
200 EUR conference participation for PhD students
150 EUR paper in the English language without conference participation
Fee includes:
- participation in sessions,
- proceedings,
- coffee breaks and refreshments,
- gala dinner,
- conference lunches,
- chapter in monograph.
VENUE OF THE CONFERENCE
The conference will take place in the University Gliding Centre in
Bezmiechowa Gorna. More informations you can find on web site
http://aos-bezmiechowa.pl.
IMPORTANT DATES
1. Deadline for registration: April 25, 2016
2. Deadline for abstract: April 30, 2016
3. Deadline for paper submission: May 15, 2016
4. Payment of conference fee: May 20, 2016
5. Notification of paper acceptance: May 25, 2016
All papers will be published in abstract form in conference
proceedings.The papers selected by the Scientific
Committee will be published in the part 5 of the
monographic series "Progressive Technologies and
Materials". Accepted papers (after reviews) will be
published in the regular issue of the Scientific Letters of
Rzeszow University of Technology “Mechanics” RUTMech.
The Scientific Committee after the paper preliminary
review will sent information about possibilities of
publishing in journals. Papers written in English language
may be published in:
1. Advances in Science and Technology – Research Journal ISSN 2299-8624;
2. Acta Mechanica et Automatica - ISSN 2300-5319;
3. Open Engineering - ISSN 2391-5439;
4. Interdisciplinary Journal of Engineering Sciences - ISSN
2300-5874;
5. Przetwó rstwo tworzyw – polymer processing - ISSN
1429-0472.
After the conference, the authors of selected papers will be
asked to submit their work for reviews to publishing in
indexed scientific journals (WoS).
Address
University Gliding Centre
Bezmiechowa Górna 111
38-600 Lesko
More information about the conference is available on
http://www.prz.edu.pl/mech/konfer/Protechma2016/index.htm