P E R F E C T LY C O N T R O L L E D L I G H T I N G
EdgeLEDTMIRange
P E R F E C T LY C O N T R O L L E D L I G H T I N G
THE NEW DAWN IN LED LIGHTING
There has been LED lighting before, but never like this. Highly energy
efficient yet with a pleasing and uniform level of light, we deliver the
advantages LED has always promised.
It’s taken Fern-Howard’s thirty-five years’ commercial lighting experience,
combined with ground-breaking new EdgeLEDTM technology - and it
means you no longer have to choose between energy efficient lighting,
effective lighting and good looking luminaires.
ADVANCEMENT OF CORRIDOR LIGHTING SCHEMES
EdgeLED™ means spaces can be lit to equal levels using fewer, more
efficient, luminaires*. Energy and costs are saved, CO2 emissions are
lower, and reduced lamp changes cut maintenance costs considerably.
1990’s
Mini-Max 2D
Switch-Start T6, Opal Diffuser
42W / 1,000 Lumens
Lamp Life: 8,000 hours
14
98 Lamp Changes**
2014
EdgeLED™ P5
High-Frequency T5, Opal Diffuser
28W / 1,200 Lumens
Lamp Life: 15,000 hours
EdgeLED™ Optical System
20W / 1,600 Lumens
Lamp Life: 50,000 hours
12
48 Lamp Changes**
9
co2 500kg
Mini-Max 2D
co2 Emissions: 1,200kg
co2 Emissions:
2,550kg
1980’s
Zero Lamp Changes**
Corridor lit to 100 Lux (Total 14,000 Lumens)
* Uniformity can be affected.
** Based on 24 hours x 365 days x 6 years x number of luminaires / lamp life hours
For more information call 01420 470 400 or visit www.fernhoward.com
EdgeLEDTM – T H E T E C H N O L O G Y
COMPLETELY CONTROLLABLE
The secret is Rambus’ patented highly sophisticated MicroLens® optics combined with TruEdge™ technology.
Together, they provide a level of lighting control that’s impossible to achieve with other LED solutions, in a system
that’s thinner, lighter and perfect for lighting design. It makes good, energy efficient, LED lighting design a reality not a compromise.
TRUEDGETM LED COUPLING
TruEdgeTM optimises the interface between LED and light guide
•
Highly efficient
•
Fewer LEDs means lower costs
•
Thinner LEDs means lower costs
•
Thinner form factors for more elegant designs
TruEdgeTM LED-to-light guide interface
MICROLENS ® OPTICS
LED
•
MicroLens® optics give precise control of the uniformity,
exit angle and spread of light
•
Optimised delivery means fewer LEDs
•
Optics can vary by depth, shape, density and location
•
Perfect for a wide range of displays and lighting fixtures
Low-efficiency
diffuse reflection
Desired exit angle
Light from light source
Light guide
High-efficiency
spectacular reflection
Desired exit angle
Light guide
Printed, chemical, or laser etched features
Light from light source
Light guide
MicroLens© light distribution features
3
EdgeLEDTM – T H E T E C H N O L O G Y
EdgeLEDTM – THE GROUND-BREAKING TECHNOLOGY
All to often, LED products are disliked due to the intensity of light created
by the very LED source that makes them so efficient – and most attempts
at reducing this intensity have compromised their optical efficiency
and light distribution by using opal diffusers - so increasing energy
consumption.
The true advantages of LED are lost.
However, with EdgeLEDTM technology the LEDs are arranged around
the edge of a light guide, a highly engineered optical device containing
thousands of micro lenses. It is these that precisely control the light from
the light guide and channel it to exactly where it is required. Although new
to the lighting market, the technology itself is well proven and reliable and
can already be found in TVs, tablets, and mobile phones.
The result is a pleasing and uniform light output with optimised distribution
that in no way compromises the inherent efficiency of LED. Not only is
the light output homogenous, it also reduces the number of luminaires
required to illuminate a given area, and allows
new, inherently attractive, designs
to be developed.
T H E N E W EdgeLEDTM R A N G E
EdgeLEDTM I P5
EdgeLEDTM I P7
Slender, stylish and robust
- aluminium bodied
pages square bulkhead,
6-7
specifically designed
for public utilities
Elegant round bulkhead,
that combines rugged
pages
performance and
8-9
outstanding efficiency
EdgeLEDTM IS1IS4IS7
New range of recessed
modular ceiling
pages
luminaires featuring
10-11
inset EdgeLED™
light panels
EdgeLEDTM IW4
Energy efficient ceiling
luminaire, specifically
pages designed for multi14-15
story car parks and
Low Bay lighting
EdgeLEDTM IA1
Highly efficient exterior
wall luminaire – puts
pages
light exactly where it
18-19
is required
EdgeLEDTM IE1IE7
Ultra slim recessed
ceiling luminaires,
pages perfect for office
12-13
applications
EdgeLEDTM IR3IR9
Slim, stylish and highly
energy efficient new
pages luminaires, delivering an
16-17 exceptionally uniform
and pleasing light
distribution
All products are
designed and
manufactured in FernHoward’s state-of-theart factory in Alton, UK
5
T H E N E W EdgeLEDTM R A N G E
EdgeLEDTM I P5
Designed for public utilities, the IP65 rated EdgeLED™ P5
combines outstanding efficiency with a slim and robust
aluminium-bodied luminaire, and shows just how versatile
Fern-Howard’s new EdgeLED™ technology can be.
As with all EdgeLED™ luminaires, the P5 produces an
246
246
65
exceptionally uniform and pleasing light distribution.
Rambus’ patented MicroLens® optics achieve high
optical efficiency with exact light control; and because the
maximum light is extracted and directed precisely, less
energy is required.
Qualifying for ECA support, the EdgeLED™ P5 is the
perfect solution for local authorities, education, public
utilities and housing associations.
•
IP 65 rating – formed-in-place foam gasket seal protects
against dust and water
•
One-component heat sink incorporating both EdgeLED™
light guide and driver for swift and easy installation
•
Highly energy efficient EdgeLED™ optical system with a
life span of 50,000 hours (L85)
•
Low maintenance costs– no annual lamp replacements
required
•
Qualifying for ECA support
7YEAR
Warranty
For details, please refer to
our warranty information on
www.fernhoward.com
For more information call 01420 470 400 or visit www.fernhoward.com
EdgeLEDTM P5
Lumen Output (Lumens)
900
1,600
2,400
System Power Consumption (W)
12
20
32
4,000
4,000
4,000
Colour Temperature (K)
CRI (Ra)
Life (L85 Hours)
Efficacy (Lumens per Circuit Watt)
>83
>83
>83
50,000
50,000
50,000
81
78
77
Specification Options:
ü
ü
ü
Auto Test
ü
ü
ü
Microwave Sensor
ü
ü
ü
Photocell
ü
ü
ü
DALI
ü
ü
ü
Corridor Function
ü
ü
ü
ü
Dimensions (mm)
75˚
80
60˚
160
45˚
3hr Emergency
Dimming
90˚
ü
ü
240
320
400
30˚
cd/klm
C0 - C180
ŋ = 100%
C90 - C270
246 x 246 x 65mm
Mounting Type
Wall & Ceiling
Formed In Place Foam Gasket
– Our system uses two chemically
safe components which expand
when combined to form a ‘poured
two-part gasket’. This has no
joins, blends and fills any uneven
surfaces, needs no additional fixing
and requires no secondary sponge
material to form a perfect seal.
Robust die-cast
aluminium body
in black or white
Clear polycarbonate diffuser
with a stylised prismatic edge
for greater efficiency
EdgeLED™ light guide creates a
pleasant and uniform light - no
opal diffuser is needed to
conceal harsh LED light spots
77
T H E N E W EdgeLEDTM R A N G E
EdgeLEDTM I P7
Fern-Howard’s unique EdgeLED™ technology means the
aluminium bodied P7 can combine rugged performance,
IP65 rating and outstanding efficiency in a slim rounded
and elegant luminaire.
As with all EdgeLED™ luminaires, the P7 produces an
exceptionally uniform and pleasing light distribution.
Rambus’ patented MicroLens® optics achieve high
optical efficiency with exact light control; and because the
maximum light is extracted and directed precisely, less
energy is required.
300
Perfect for public utilities and social housing, the
EdgeLED™ P7 qualifies for ECA support and is just as
suited to education and housing associations – anywhere a
good-looking efficient luminaire with low maintenance and
running costs is essential.
•
IP 65 rating – formed-in-place foam gasket seal protects
against dust and water
66
•
One-component heat sink incorporating both EdgeLED™
light guide and high efficiency driver
•
Highly energy efficient EdgeLED™ optical system with a
life span of 50,000 hours (L85)
•
Significantly reduced maintenance costs– no annual lamp
replacements necessary
•
Qualifying for ECA support
7YEAR
Warranty
For details, please refer to
our warranty information on
www.fernhoward.com
For more information call 01420 470 400 or visit www.fernhoward.com
EdgeLEDTM P7
Lumen Output (Lumens)
900
1,600
2,400
System Power Consumption (W)
12
20
32
4,000
4,000
4,000
Colour Temperature (K)
CRI (Ra)
Life (L85 Hours)
>83
>83
>83
50,000
50,000
50,000
81
78
77
Efficacy (Lumens per Circuit Watt)
Specification Options:
75˚
80
60˚
160
45˚
3hr Emergency
ü
ü
ü
Auto Test
ü
ü
ü
Microwave Sensor
ü
ü
ü
Photocell
ü
ü
ü
DALI
ü
ü
ü
Corridor Function
ü
ü
ü
Dimming
90˚
ü
ü
Dimensions (mm)
ø300 x 66mm
Mounting Type
Wall & Ceiling
ü
Formed In Place Foam Gasket
– Our system uses two chemically
safe components which expand
when combined to form a ‘poured
two-part gasket’. This has no
joins, blends and fills any uneven
surfaces, needs no additional fixing
and requires no secondary sponge
material to form a perfect seal.
240
320
400
30˚
cd/klm
C0 - C180
ŋ = 100%
C90 - C270
Robust die-cast
aluminium body
in black or white
Clear polycarbonate diffuser
with a stylised prismatic edge
for greater efficiency
EdgeLED™ light guide creates a
pleasant and uniform light - no
opal diffuser is needed to
conceal harsh LED light spots
99
T H E N E W EdgeLEDTM R A N G E
EdgeLEDTMIS1IS4IS7
This all-new range of recessed modular ceiling luminaires
features an inset EdgeLED™ light panel that produces
perfectly uniform light with minimal energy consumption.
Contemporary and stylish in design, it ensures clean ceiling
lines are retained, whilst its exceptional optical efficiency
and light distribution reduce the number of fixtures required
in a typical installation.
84
EdgeLED T M IS1
A high-output luminaire, perfect for installations
where intense illumination is required, or high
ceilings exist
EdgeLED T M IS4
598
LG7 compliant luminaire – best for commercial
interiors and large circulation areas
EdgeLED T M IS7
598
A highly efficient low-glare solution, perfect for
general LG7 office applications
5YEAR
Warranty
For details, please refer to
our warranty information on
www.fernhoward.com
5YEAR
Warranty
For details, please refer to
our warranty information on
www.fernhoward.com
7YEAR
Warranty
For details, please refer to
our warranty information on
www.fernhoward.com
•
Maximum luminaire spacing will still achieve a uniformity
of light greater than 90%
•
Managed light distribution through ray angle control
MicroLens® technology from Rambus delivers best in
class optical control and efficiency
•
Highly energy efficient EdgeLED™ optical system
with a life span of 30,000 hours, L70 (S1 and S4) and
50,000 hours, L85 (S7) - drastically reduces running and
maintenance costs
•
LG7 compliant (S4 and S7)
•
Qualifying for ECA support
For more information call 01420 470 400 or visit www.fernhoward.com
Lumen Output (Lumens)
EdgeLEDTM I S4
EdgeLEDTM I S7
3,300
2,500
2,600
41
34
31
85˚
4,000
4,000
4,000
80˚
>85
>85
>85
30,000 (L70)
30,000 (L70)
50,000 (L85)
80
72
82
ü
ü
ü
System Power Consumption (W)
Colour Temperature (K)
CRI (Ra)
Life
EdgeLED T M IS1
EdgeLEDTM I S1
Efficacy (Lumens per Circuit Watt)
90˚
100
200
70˚
300
400
50˚
Specification Options:
500
600
3hr Emergency
Auto Test
ü
ü
ü
Microwave Sensor
ü
ü
ü
Photocell
ü
ü
ü
DALI
ü
ü
ü
Corridor Function
ü
ü
ü
Dimming
ü
ü
ü
Dimensions (mm)
= 100%
ŋ=100%
C90 - C270
cd/klm
C0 - C180
C0 - C180
C90 - C270
EdgeLED T M IS4IS7
90˚
LG7
85˚
80˚
598 x 598 x 84mm
Mounting Type
700
cd/klm
100
200
Recessed Ceiling Grid
70˚
300
400
50˚
500
600
700
Easy to clean
wipe-over
wipe over surface
cd/klm
cd/klm
C0
C0- -C180
C180
Integral driver and
pre-wired
pre wired terminal
block ensure quick
and easy installation
Slim profile (84mm) makes
the S1, S4 and S7 suitable for
most exposed and concealed
T-bar ceiling grids
= 100%
ŋ=100%
C90 --C270
C270
C90
Contemporary
Contem
injection moulded
mo
housing combines
com
sstyle
st
yle and durability
du
EdgeLED™ light guide creates a
pleasant and uniform light with
minimal energy consumption
11
T H E N E W EdgeLEDTM R A N G E
EdgeLEDTM IE1IE7
This new range of ultra slim recessed ceiling luminaires
features an integral EdgeLED™ light panel that produces
perfectly uniform light with minimal energy consumption.
The simple modern design ensures clean ceiling lines are
retained, whilst its exceptional optical efficiency and light
11
distribution reduce the number of fixtures required in a
typical installation.
EdgeLED T M IE1
A high-output luminaire, perfect for installations where
intense illumination is required, or high ceilings exist
596
EdgeLED T M IE7
A highly efficient LG7 compliant luminaire, perfect for
office applications, commercial interiors and large
circulation areas
596
•
Maximum luminaire spacing will still achieve a uniformity
of light greater than 90%
•
Managed light distribution through ray angle control
MicroLens® technology from Rambus delivers best in
class optical control and efficiency
•
Highly energy efficient EdgeLED™ optical system with
a life span of 50,000 hours, L85 - drastically reduces
running and maintenance costs
•
LG7 compliant (E7)
•
Qualifying for ECA support
7YEAR
Warranty
For details, please refer to
our warranty information on
www.fernhoward.com
For more information call 01420 470 400 or visit www.fernhoward.com
Lumen Output (Lumens)
EdgeLEDTM I E7
3,300
2,600
41
31
85˚
4,000
4,000
80˚
>85
>85
50,000
50,000
80
82
System Power Consumption (W)
Colour Temperature (K)
CRI (Ra)
Life (L85 Hours)
EdgeLED T M IE1
EdgeLEDTM I E1
Efficacy (Lumens per Circuit Watt)
90˚
200
70˚
300
400
50˚
700
ü
ü
Auto Test
ü
ü
Microwave Sensor
ü
ü
Photocell
ü
ü
DALI
ü
ü
Corridor Function
ü
ü
Dimming
ü
ü
Dimensions (mm)
Mounting Type
500
600
Specification Options:
3hr Emergency
100
cd/klm
= 100%
ŋ=100%
C90 - C270
cd/klm
C0 - C180
C0 - C180
C90 - C270
EdgeLED T M IE7
90˚
LG7
85˚
80˚
100
200
596 x 596 x 11mm
70˚
300
Recessed Ceiling Grid
400
50˚
500
600
700
cd/klm
cd/klm
C0
C0- -C180
C180
= 100%
ŋ=100%
C90 --C270
C270
C90
Easy to clean
wipe-over
surface
Ultra slim profile
Contemporary metal housing
combines style and durability
EdgeLED™ light guide creates a
pleasant and uniform light with
minimal energy consumption
13
T H E N E W EdgeLEDTM R A N G E
EdgeLEDTM IW4
A highly efficient IP65 rated ceiling luminaire specially
created for multi-story car parks and Low Bay lighting.
The inset EdgeLED™ light panel produces perfectly
uniform light with minimal energy consumption, whilst
the exceptional optical efficiency and light distribution
reduce the number of fixtures required. A durable and
stylish steel housing completes the package.
56
•
Managed light distribution through ray angle control
MicroLens® technology from Rambus for best in class
optical control and efficiency
•
Integral driver and pre-wired terminal block ensure
quick and easy installation
•
IP 65 rated - formed-in-place foam gasket protects
against dust and water
•
Highly energy efficient EdgeLED™ optical system with
a life span of 30,000 hours (L70)
•
Qualifying for ECA support
400
400
5YEAR
Warranty
For details, please refer to
our warranty information on
www.fernhoward.com
For more information call 01420 470 400 or visit www.fernhoward.com
EdgeLEDTM I W4
Lumen Output (Lumens)
System Power Consumption (W)
Colour Temperature (K)
CRI (Ra)
Life (L70 Hours)
Efficacy (Lumens per Circuit Watt)
4,000
55
90˚
85˚
4,000
>85
100
80˚
30,000
72
200
70˚
300
Specification Options:
3hr Emergency
ü
Auto Test
ü
Photocell
ü
DALI
ü
Corridor Function
Dimensions (mm)
Mounting Type
500
50˚
Microwave Sensor
Dimming
400
ü
400 x 400 x 56mm
600
700
cd/klm
C0 - C180
= 100%
C 9 0 - C270
Ceiling
Formed In Place Foam Gasket
Our system uses two chemically safe
components which expand when
combined to form a ‘poured two-part
gasket’. This has no joins, blends
and fills any uneven surfaces, needs
no additional fixing and requires no
secondary sponge material to form a
perfect seal.
Durable and stylish
steel housing
EdgeLED™ light guide creates a
pleasant and uniform light with
minimal energy consumption
15
T H E N E W EdgeLEDTM R A N G E
EdgeLEDTMIR3IR9
This new range of decorative luminaires illustrates the
elegant design opportunities EdgeLED™ offers. Thinner,
brighter and more cost effective, the R3 and R9 are also
stylish; and suitable anywhere aesthetics are as important
as performance, in reception areas, hallways and
staircases as well as commercial spaces.
As with all EdgeLED™ luminaires, the R3 and R9 produce
an exceptionally uniform and pleasing light distribution.
Rambus’ patented MicroLens® optics achieve high
optical efficiency with exact light control; and because the
maximum light is extracted and directed precisely, less
energy is required.
EdgeLEDTMIR3
360
58
EdgeLEDTMIR9
•
Wall or ceiling mountable
•
Robust die-cast aluminium heat sink and base
•
Attractive ABS Trim
•
Available in black or white
•
IP 65 rated - formed-in-place foam gasket protects
against dust and water
•
Highly energy efficient EdgeLED™ optical system with a
life span of 50,000 hours (L85)
7YEAR
48
Warranty
Ø420
For details, please refer to
our warranty information on
www.fernhoward.com
For more information call 01420 470 400 or visit www.fernhoward.com
EdgeLEDTM I R3 I R9
Lumen Output (Lumens)
System Power Consumption (W)
Colour Temperature (K)
CRI (Ra)
Life (L85 Hours)
Efficacy (Lumens per Circuit Watt)
1,700
2,500
22
34
4,000
4,000
>80
>80
50,000
50,000
77
73
Specification Options:
ü
ü
Auto Test
ü
ü
Microwave Sensor
ü
ü
Photocell
ü
ü
DALI
ü
ü
Corridor Function
ü
ü
ü
ü
Dimensions (mm)
75˚
100
60˚
150
45˚
3hr Emergency
Dimming
90˚
R3 ø 360 x 58mm R9 ø 420 x 48mm
Mounting Type
200
250
300
30˚
cd/klm
C0 - C180
= 100%
C90 - C270
Wall & Ceiling
Formed In Place Foam Gasket
Our system uses two chemically safe
components which expand when
combined to form a ‘poured two-part
gasket’. This has no joins, blends
and fills any uneven surfaces, needs
no additional fixing and requires no
secondary sponge material to form a
perfect seal.
EdgeLED™ light guide creates a pleasant
and uniform light - no opal diffuser is
needed to conceal harsh LED light spots
17
17
T H E N E W EdgeLEDTM R A N G E
EdgeLEDTMIA1
This highly energy efficient exterior wall luminaire distributes
light exactly where it is needed with a combination of high
optical efficiency and precise ray angle controlled output.
Rambus’ patented MicroLens® technology creates a
pleasant and uniform light, whilst ray angle control directs
light exactly where it is required - light spillages and light
pollution are avoided and spaces come to life. All while using
a minimum amount of energy.
Wall mounted, the A1 has been designed specifically for
areas where controlling illumination is paramount, such as
walkways, external landing areas and corridors; anywhere
that demands to be well lit, but where light pollution must be
avoided.
360
58
7YEAR
Warranty
For details, please refer to
our warranty information on
www.fernhoward.com
•
Zero light loss on unwanted areas guarantees maximum
application efficiency
•
Delivering exceptionally uniform and pleasant light
•
Robust die-cast aluminium heat sink and base
•
Attractive ABS Trim
•
Clear polycarbonate lens cover
•
Available in black or white
•
Slim profile
•
IP 65 rated - formed-in-place foam gasket protects
against dust and water
•
Wall mounted with rear cable entry and integral
control gear
•
Highly energy efficient EdgeLED™ optical system with
a life span of 50,000 hours (L85), drastically reduces
running and maintenance costs
For more information call 01420 470 400 or visit www.fernhoward.com
EdgeLEDTM I A1
Lumen Output (Lumens)
1,100
System Power Consumption (W)
24
4,000
4,000
>80
>80
50,000
50,000
78
75
Colour Temperature (K)
CRI (Ra)
Life (L85 Hours)
1,800
14
Efficacy (Lumens per Circuit Watt)
100
200
300
cd/klm
Specification Options:
= 100%
C0 - C180
C90 - C270
C140 - C320
3hr Emergency
ü
ü
Auto Test
ü
ü
1.0
0.5
Microwave Sensor
ü
ü
Photocell
ü
ü
DALI
ü
ü
Corridor Function
ü
ü
Dimming
ü
ü
Dimensions (mm)
Mounting Type
1x Luminaire mounted at 2.4m
2m
0
0.5
2.5
2.01
.5
1.00
.5
00
.5
1.01
.5
2.02
.5
1.0
Ø360 x 58mm
Wall
40
60
Average Lux
5m
More light - precisely where you need it
EdgeLED™ technology places LEDs around the edge of a light guide - a highly engineered
optical device containing thousands of micro lenses that precisely control the density of
light travelling through the guide.
The A1 takes this a step further. Using ray angle control, the light is directed precisely to
where it is required – in a walkway only the walkway is lit, no light spills onto opposite walls,
none is lost to the sky.
This method guarantees maximum efficiency and - with fewer fixtures required to light the
same area - installation and operating costs are reduced.
Comparing lighting schemes
It would take 14x2D luminaires to light an average 45x2m walkway to 20Lux - yet
only 4 EdgeLED® A1 luminaires can achieve the same result!
2D Switch-start
NEW EdgeLEDTM lA1
28W 2D Switch-start (clear diffuser)
24W EdgeLEDTM lA1
(with Rambus’ patented MicroLens® technology)
38W System Power Consumption/per luminaire
24W System Power Consumption/per luminaire
14 luminaires required
Annual Energy Consumption = 4,600 KWh
4 luminaires required
Annual CO2 Emission = 2,413 kg
Annual CO2 Emission = 422 kg
Annual Energy Consumption = 800 KWh
19
Fern-Howard - market-leading manufacturers of
energy efficient, high quality and reliable luminaires
since 1987 - are known for their functional and
stylish designs. A reputation among users,
specifiers and installers that’s enhanced by their
new and ground breaking range of slim and elegant
EdgeLEDTM luminaires.
EdgeLEDTM allows Fern-Howard to create luminaires that are
both highly energy efficient and deliver a pleasing, uniform
light, and underlines their ability to meet the needs of a rapidly
changing market through innovation.
Over 500,000 fittings are manufactured annually at Fern-Howard’s
state-of-the-art UK factory - from vandal proof designs and
self-testing and DALI control units to precise injection
moulded light guides.
All products are designed &
manufactured in the UK
Our EdgeLEDTM products are the result of a unique collaboration
with Rambus Inc. a US based technology leader in the field
of LED Edge lighting application. All EdgeLEDTM products
are manufactured at our state-of-the-art injection moulding
and assembly facility in the UK and are based on Rambus’
impressive portfolio of LED Edge lighting patents covering
lens design, LED coupling and Lens replication. This unique
partnership brings our customers innovative products with
market leading performance and appearance - designed and
manufactured using world class, patented, technology.
Warranty
All Fern-Howard products are designed and manufactured to
exacting standards for excellent performance, reliable operation
and long life. This also enables Fern-Howard to offer marketleading warranty periods and give unrivalled support on the rare
occasions when help is needed. Exact warranty terms vary by
product; but can last up to seven years and may be managed
by a simple, on-line, registration process. Full details can be
found on our website: www.fernhoward.co.uk\warranty
Fern-Howard, 2 Newman Lane, Alton, Hampshire, GU34 2QR, United Kingdom.
Tel: +44 (0)1420 470400 Fax: +44 (0)1420 489536 Email: lighting@fernhoward.com
www.fernhoward.com
FHL13003 | Issue 2 | March 2014
Registered in England Reg. No. 3202749
We reserve the right to alter specifications without notice in accordance with our policy of continuous
product improvement. Design and copyright rights reserved and our standard Terms & Conditions apply.