Faculty of Information and Communication Engineering
B.E. Electronics and Communication Engineering
(R 2013) Semester – II
EC6211 Circuits and Devices Laboratory
Requirements for a batch of 30 students
Sl.
No.
Quantity
required
(R)
Description of Equipment
1.
BC 107, BC 148,2N2646,BFW10
25
2.
1N4007, Zener diodes
25
3.
Resistors, Capacitors, Inductors -
50
4.
Bread Boards
15
5.
CRO (30MHz).
10
6.
Function Generators (3MHz)
10
7.
Dual Regulated Power Supplies ( 0 –
30V)
10
1
Quantity
available
(A)
Deficiency
(R - A)
Faculty of Information and Communication Engineering
B.E. Electronics and Communication Engineering
(R 2013) Semester – III
EC6311 ANALOG AND DIGITAL CIRCUITS LABORATORY
Requirements for a batch of 30 students
Sl.
No.
1
Quantity
required
(R)
Description of Equipment
CRO (30MHz)
15
2
Signal Generator /Function Generators
(3 MHz)
15
3
Dual Regulated Power Supplies ( 0 –
30V)
15
4
Standalone desktop PCs with SPICE
software
15
5
Transistor/FET (BJT-NPN-PNP and
NMOS/PMOS)
50
6
Dual power supply/ single mode power
supply
15
7
8
9
10
11
12
IC Trainer Kit
15
Bread Boards
15
Computer with HDL software
15
Seven segment display
15
15
Multimeter
ICs 7400/ 7402 / 7404 / 7486 / 7408 /
7432 / 7483 / 74150 / 74151 / 74147 /
7445 / 7476/7491/ 555 / 7494 / 7447 /
74180 / 7485 / 7473 / 74138 / 7411 /
7474
50
2
Quantity
available
(A)
Deficiency
(R - A)
Faculty of Information and Communication
Communication Engineering
B.E. Electronics and Communication Engineering
(R 2013) Semester – III
EC6312
OOPS AND DATA STRUCTURES LABORATORY
Requirements for a batch of 30 students
Sl.
No.
1
2
Quantity
required
(R)
Description of Equipment
Standalone desktops (or) Server
supporting
30
C++ compiler
30
3
Quantity
available
(A)
Deficiency
(R - A)
Faculty of Information
Information and Communication Engineering
B.E. Electronics and Communication Engineering
(R 2013) Semester – IV
EC6411 CIRCUITS AND SIMULATION INTEGRATED LABORATORY
Requirements for a batch of 30 students
Sl.
No.
1
Quantity
required
(R)
Description of Equipment
CRO (Min 30MHz)
15
2
Signal Generator /Function Generators
(2 MHz)
15
3
Dual Regulated Power Supplies ( 0 –
30V)
15
4
Digital Multimeter
15
5
Digital LCR Meter
2
6
Standalone desktops PC
15
7
Transistor/FET (BJT-NPN-PNP and
NMOS/PMOS)
50
8
Transistors, Resistors, Capacitors,
diodes, Bread Boards, Transformers
50
9
SPICE Circuit Simulation Software
(any public domain or commercial
software)
15
4
Quantity
available
(A)
Deficiency
(R - A)
Faculty of Information and Communication Engineering
B.E. Electronics and Communication Engineering
(R 2013) Semester – IV
EC6412 LINEAR INTEGRATED CIRCUITS LABORATORY
Requirements for a batch of 30 students
Sl.
No.
1
Quantity
required
(R)
Description of Equipment
CRO (Min 30MHz)
15
2
Signal Generator /Function Generators
(2 MHz)
15
3
Dual Regulated Power Supplies ( 0 –
30V)
15
4
Digital Multimeter
15
5
IC tester
5
6
Standalone desktops PC
15
7
8
SPICE Circuit Simulation Software
Quantity
available
(A)
Deficiency
(R - A)
15
Transistors, Resistors, Capacitors,
diodes, Zener diodes, Bread Boards,
Transformers, wires, Power transistors,
Potentiometer, A/D and D/A convertors,
LEDs
50
Note: Op-Amps uA741, LM 301, LM311, LM 324, LM317, LM723, 7805, 7812, 2N3524, 2N3525,
2N3391, AD 633, LM 555, and LM 565 may be used.
5
Faculty of Information and Communication Engineering
B.E. Electronics and Communication Engineering
(R 2013) Semester – IV
EE6461
ELECTRICAL ENGINEERING AND CONTROL SYSTEM LABORATORY
Requirements for a batch of 30 students
Sl.
No.
1
2
Quantity
required
(R)
Description of Equipment
DC Shunt Motor with Loading Arrangement
2
3HP,220V,14A,750RPM,0.6A(Shunt field)
1
DC Shunt Motor Coupled With Three phase
Alternator
3
DC Shunt Motor - kW: 5.2 / volts: 220 / Amps: 27.5/
Speed: 1500 RPM/ Field current: 0.9A
1
4
Three phase Alternator - kVA: 7.5/ volts: 415/ Amps:
10.4
Speed: 1500 RPM/ Field current: 2A.
1
5
Single Phase Transformer; 2 KVA,230/110-166 V
1
6
Three Phase
Arrangement
Induction
Motor
with
Loading
1
(3.7KW,415v,7.5A,1430 RPM)
7
Single Phase
Arrangement
Induction
Motor
with
Loading
1
(230V,5HP,17A)
9
Tachometer –Digital/Analog
8
10
Single Phase Auto Transformer;(0-270)V
2
11
Three Phase Auto Transformer;(0-270)V
1
12
MC Voltmeter-(0-300/600)V
5
6
Quantity
available
(A)
Deficiency
(R - A)
13
MC Ammeter (0-10/20)A
5
14
MC Ammeter (0-2/1)A
4
15
MI Voltmeter (0-300/600)V
5
16
MI Ammeter (0-10/20)A
6
17
MI Ammeter (0-1/2)A
4
18
UPF Wattmeter (300/600V,10/20A)
4
19
LPF Wattmeter (300/600V,10/20A)
4
20
Single Phase Resistive Loading Bank(10KW)
2
21
Three Phase Resistive Loading Bank(10KW)
2
22
SPST switch
2
23
Fuse various ranges
As per the
requirement
24
Wires
As per the
requirement
25
Rheostats(100Ω,1A;250Ω,1.5A;75Ω,16A,1000Ω,1A)
26
Computers with MATLAB or equivalent Software
7
Each 2
30
Faculty of Information and Communication Engineering
B.E. Electronics and Communication Engineering
(R 2013) Semester – V
EC6511 DIGITAL SIGNAL PROCESSING LABORATORY
Requirements for a batch of 30 students
Sl.
No.
Quantity
required
(R)
Description of Equipment
1
PCs with Fixed / Floating point DSP
Processors (Kit / Add-on Cards)
15
2
MATLAB with Simulink and Signal
Processing Tool Box or Equivalent
Software in desktop systems
15
3
Signal Generators (1MHz)
15
4
CRO (20MHz)
15
8
Quantity
available
(A)
Deficiency
(R - A)
Faculty of Information and Communication Engineering
B.E. Electronics and Communication Engineering
(R 2013) Semester – V
EC6512 COMMUNICATION SYSTEMS LABORATORY
Requirements for a batch of 30 students (3 STUDENTS PER EXPERIMENT):
Sl.
No.
Description of Equipment
Quantity
required
(R)
1
Kits for Signal Sampling, TDM, AM, FM,
PCM, DM and Line Coding Schemes
10
CROs
15
3
MATLAB / SCILAB or equivalent
software package for simulation
experiments
10
4
PCs
10
2
9
Quantity
available
(A)
Deficiency
(R - A)
Faculty of Information and Communication Engineering
B.E. Electronics and Communication Engineering
(R 2013) Semester – V
EC6513 MICROPROCESSOR AND MICROCONTROLLER LABORATORY
Requirements for a batch of 30 students
Sl.
No.
Quantity
required
(R)
Description of Equipment
8086 Microprocessor trainer kit with
power supply
15
8051 Microcontroller trainer kit with
power supply
15
3
Traffic light control Interfacing card
compatible with 8086 & 8051 Trainers
5
4
Stepper motor control Interfacing
compatible with 8086 & 8051 kits
5
5
Digital Clock Interfacing board
compatible with 8086 & 8051 kits
5
6
Keyboard & Display Interface board
compatible with 8086 & 8051 kits
5
7
Printer Interfacing card compatible with
8086 & 8051 kits
5
8
A/D and D/A Interfacing card compatible
with 8086 & 8051 kits
5
9
Serial and Parallel Interfacing card
compatible with 8086 & 8051 kits
5
1
2
10
Quantity
available
(A)
Deficiency
(R - A)
Faculty of Information and Communication Engineering
B.E. Electronics and Communication Engineering
(R 2013) Semester – VI
EC6611 COMPUTER NETWORKS LABORATORY
Requirements for a batch of 30 students
Sl.
No.
Quantity
required
(R)
Description of Equipment
1
C / C++ / Java / Equivalent Compiler
30
2
Network simulator like NS2/ NS3 /
Glomosim /OPNET/ Equivalent
30
3
Standalone desktops
30
11
Quantity
available
(A)
Deficiency
(R - A)
Faculty of Information and Communication Engineering
B.E. Electronics and Communication Engineering
(R 2013) Semester – VI
EC6612 VLSI DESIGN LABORATORY
Requirements for a batch of 30 students
Sl.
No.
Quantity
required
(R)
Description of Equipment
1
Xilinx or Altera FPGA
2
Cadence/MAGMA/Tanner or equivalent
software package
3
PCs
10
10 User
License
10
12
Quantity
available
(A)
Deficiency
(R - A)
Faculty of Information and Communication Engineering
B.E. Electronics and Communication Engineering
(R 2013) Semester – VII
EC6711 EMBEDDED LABORATORY
Requirements for a batch of 30 students (3 students per batch)
Sl.
No.
Quantity
required
(R)
Description of Equipment
1
Embedded trainer kits with ARM board
10
2
Embedded trainer kits suitable for
wireless communication
10
3
Adequate quantities of Hardware, software and consumables
13
Quantity
available
(A)
Deficiency
(R - A)
Faculty of Information and Communication Engineering
B.E. Electronics and Communication Engineering
(R 2013) Semester – VII
EC6712 OPTICAL AND MICROWAVE LABORATORY
Requirements for a batch of 30 students (3 students per batch)
Sl.
No.
Quantity
required
(R)
Description of Equipment
Quantity
available
(A)
Deficiency
(R - A)
Trainer kit for carrying out LED and PIN
2
diode characteristics, Digital multi meter,
optical power meter
2
Trainer kit for determining the mode
2
characteristics, losses in optical fiber
Trainer kit for analyzing Analog and
Digital link performance, 2 Mbps PRBS
2
Data source, 10 MHz
3
signal generator, 20 MHz Digital storage
Oscilloscope
Kit for measuring Numerical aperture
2
4
and Attenuation of fiber
5
MM/SM Glass and plastic fiber patch
2 Set
chords with ST/SC/E2000 connectors
LEDs with ST / SC / E2000 receptacles
2 Set
6
– 650 / 850 nm
PiN PDs with ST / SC / E2000
2 Set
7
receptacles – 650 / 850 nm
Microwave test Bench at X band to
8
2
determine Directional coupler
characteristics
Microwave test Bench at X band and
Antenna turn table to measure Radiation
2
9
pattern of Horn antenna, 2 Horn
antennas
Microwave test Bench at X band to
determine VSWR for Isolator and
2
10 Circulator, VSWR meter,
Isolator, Circulator, E Plane Tee, H plane
Tee
Microwave test Bench at X band,
2
11 Variable attenuator, Detector and 20
MHz Digital / Analog Oscilloscope
Note: Microwave test bench comprises of Reflex klystron or Gunn diode with power supply, Gunn
oscillator, PIN modulator, Isolator, Fixed and Variable Attenuator, frequency meter, Slotted
section, Wave guides, detector with mount, Termination, Movable short, Slide screw tuner, Horn
antenna, Directional coupler and 20 MHz Digital / Analog Oscilloscope
1
14