3.3V/5V, High-Speed Logic Gate Optocoupler with Excellent Noise

advertisement
3.3V/5V, High-Speed Logic Gate Optocoupler with
Excellent Noise Immunity
Customer Presentation
December 2009
www.fairchildsemi.com
Optoplanar® Technology
The High Speed Optocoupler family utilizes Fairchild’s patented coplanar
packaging technology, Optoplanar®, and optimized IC design to guarantee
minimum 20kV/μs Common Mode Transient Immunity (CMTI).
Competitive Advantages
 High CMTI. This construction eliminates the capacitive charge buildup
that occurs in the over-under construction.
Fixed isolation gap (thickness through insulation). So a consistent high
input to output isolation voltage
2
High Noise Immunity, Logic Gate
Optocoupler in MFP 5-Pin
 By combining the reliable isolation,
excellent noise immunity
characteristics, small footprint of an
optocoupler with the high data rate
capability, the FODM8071,
FODM8061 and FODM611 allow
system engineers to design a
robust system, with low
transmission error rate, low system
failure rate, a proven reliability over
extended periods of time required
for Industrial systems, at a low cost
of design and component.
FODM8071
FODM8061, FODM611
ANODE
CATHODE
1
2
6
VCC
5
VO
4
GND
ANODE
CATHODE
1
3
6
VDD
5
VO
4
GND
3
Value Propositions
 Optoplanar® offers the best-in-class common mode transient immunity; 20kV/us
minimum allowing these devices to operate in noisy industrial environments (100%
better than our closest competitors)
 Enhanced performance over extended operating temperature range up to 110ºC
 Small size footprint enhances board space saving
 3.3V or 5V supply voltage facilitates logic level translation
 High isolation voltage certified by UL1577 and IEC60747-5-2 certification for
increased reliability
4
Benchmarking
Note: Highlighted in blue box shows better performance
5
Benchmarking
Note: Highlighted in blue box shows better performance
6
FOD8001, FOD0721, FOD0720, FOD0710
High Noise Immunity, 25Mbit/sec Logic Gate
Optocoupler
Features
 High Noise Immunity characterized by common
mode rejection (CMR) and power supply
rejection specifications
 20kV/μs Minimum Static CMR @ Vcm = 1000V
 25kV/us Typical Dynamic CMR @ Vcm = 1500V,
20MBaud Rate
 In excess of 10% of the supply voltages across
full operating bandwidth
 Data Rate, Non-Return Zero Coding
 25Mbit/sec (FOD8001, FOD0721 and FOD0720)
 12.5Mbit/sec (FOD0710)
 Pulse Width Distortion
 6ns (FOD8001 and FOD0721)
 8ns (FOD0720 and FOD0710)
 +3V/5V CMOS compatibility for FOD8001
 Extended industrial temperate range
 -40 to +105°C temperature range
 8-Pin SO Package
 Safety and regulatory approvals
 UL1577, 3750 Vrms for 1 min.
 IEC60747-5-2 pending approval
7
Value Propositions
 FOD8001 and FOD07xx Series are positioned as improved replacement to
Avago’s ACPL-072L, HCPL-07xx; electrical and pin-out compatible as drop-in
replacement, eg. FOD0721 vs HCPL-0721.
 Value proposition includes higher CMTI, wide temperature range and lower
power consumption.
8
Benchmarking
Note: Highlighted in blue box shows better performance
9
Applications
www.fairchildsemi.com
Applications - Optically Isolating
High Speed Interface (1)
Fairchild’s high performance optocouplers have a superior common mode transient immunity advantage (>30%
over competition). With their high speed data rates, these optocouplers are ideal for high speed data
communications. Portable and compact electronic devices require optocouplers that reduce power consumption
and save space. The 3.3V supply voltage specification reduces power consumption by 33%, while 5-pin MFP and
dual channel 8-pin SOP packaging optimize mounting density.
Output
Transceiver
PLC or
Industrial
PC
Controller
Driver
Input
Controller
Receiver
Control
Enable
Circuit
Isolating Digital Input/Output Module
½ P82B96
I2C
Data
Isolated FieldBus Interface
(Profibus, DeviceNet, CAN, RS485/RS232)
I2C
Data
Isolated Bi-Dir I2C Interface
11
Applications - Optically Isolating
High Speed Interface (2)
C/S
I/O
Micro
Controller
with Serial
Peripheral
Interface
SCK
SCLK
High Speed
ADC
MOSI
DIN
MISO
DOUT
Data
Router/Switch
Controller
with I2C
Interface
Isolating Data Acquisition System
Physical
Layer
Power
802.3af
PSE Chip
SS
SCLK
Micro
Controller
with Serial
Peripheral
Interface
MISO
USB Serial
Interface
Engine
+
Transceiver
Power Over Ethernet (PoE)
MOSI
Isolating Universal Serial Bus
12
Controller Circuits
Applications - Optically Isolating
Intelligent Power Module (3)
M
IPM
Motor Drive Control (Optically Isolating Intelligent Power Module (IPM)
AC
Line
Input
EMI Filter
+
Transfomers
Sync
PFC
+
Primary
Side
Controller
FB
Digital Power Control
13
Rectifier
+
Secondary
Side
COntroller
Output
Cross Reference
www.fairchildsemi.com
High Performance Optocouplers (1)
Avago
6N Series
Fairchild
6N Series
100kBd Darlington Transistor
HCPL-0700
HCPL0700
HCPL-0701
HCPL0701
HCPL-0730
HCPL0730
HCPL-0731
HCPL0731
HCPL-2730
HCPL2730
HCPL-2731
HCPL2731
HCPL-070L
HCPL-073L
HCPL-270L
FOD070L
FOD073L
FOD270L
Avago
1MBd Transistor
HCPL-M452
HCPL-M453
HCPL-0452
HCPL-0453
HCPL-4502
HCPL-4503
Fairchild
HCPL-0500
HCPL-0501
HCPL-0530
HCPL-0531
HCPL-0534
HCPL-2503
HCPL-2530
HCPL-2531
HCPL0500
HCPL0501
HCPL0530
HCPL0531
HCPL0534
HCPL2503
HCPL2530
HCPL2531
HCPL-050L
HCPL-053L
HCPL-250L
FOD050L
FOD053L
FOD250L
15
FODM452
FODM453
HCPL0452
HCPL0453
HCPL4502
HCPL4503M
High Performance Optocouplers (2)
Avago
Fairchild
10MBd Logic Gate Output
HCPL-0600
HCPL0600
HCPL-0601
HCPL0601
HCPL-0611
HCPL0611
HCPL-2601
HCPL2601
HCPL-2611
HCPL2611
HCPL-0630
HCPL0637
HCPL-0631
HCPL0638
HCPL-0661
HCPL0639
HCPL-2630
HCPL2630
HCPL-2631
HCPL2631
HCPL-M611
FODM611*
HCPL-M601
FODM611*
HCPL-M600
FODM611*
HCPL-060L
HCPL-063L
HCPL-260L
ACPL-M60L
Avago
Fairchild
15MBd Logic Gate Output
HCPL-0708
FOD0708
HCPL-0738
FOD0738
ACPL-M75L
FOD8071*
25MBd CMOS Logic Gate
HCPL-0710
FOD0710
HCPL-0720
FOD0720
HCPL-0721
FOD0721
ACPL-072L
FOD8001
Gate Driver
HCPL-3120
HCPL-J312
HCPL-3140
HCPL-J314
HCPL-3150
FOD060L
HCPL062N
FOD260L
FOD8061*
16
FOD3120
FOD3120
FOD3150
FOD3150
FOD3150
THANK YOU VERY MUCH
FOR YOUR KIND ATTENTION
http://www.fairchildsemi.com/products/opto/
Product Line’s Marketing Contact:
John.constantino@fairchildsemi.com for Europe
Mai.hashimoto@fairchildsemi.com for USA
Khaicheong.yau@fairchildsemi.com for Asia, Korea, Japan
17
Download